Self‐Supporting Metal–Organic Layers as Single‐Site Solid Catalysts

An Ester-Functionalized Bidentate Titanium-based Metal-Organic Framework with Visible-Light Enhanced Activity for CO2 Photoreduction

The limited visible light response is a critical drawback that hampers the photocatalytic efficacy of Ti-MOFs. However, study concerning the enhancement of the visible-light response of Ti-MOFs is still in its nascent stage. In this study, we employ the 'dual-ligand decrystallization strategy' to manipulate the electronic environment of Ti4+, leading to the synthesis of three ester-functionalized bidentate Ti-MOFs with enhanced visible light response. Our findings reveal that this approach not only reduces the bandgap of Ti-MOFs but also enhances their photocatalytic activity for carbon dioxide reduction. Specifically, compared to the bandgap of Ti-BPDC at 2.98 eV, the bandgap of Ti-BPDC-CA 1 : 2 has been reduced to 2.14 eV. Moreover, Ti-BPDC-CA 1 : 2 exhibits extraordinary photocatalytic activity with the formic acid (HCOOH) production rate of 617 μmol g-1 h-1 with over 99.5 % selectivity, which is 3.47 times higher than that of Ti-BPDC. Besides providing a cost-effective strategy for enhancing the visible light response of Ti-MOFs, our study also serves as an illustrative example for establishing the correlation between electronic structure and optical properties.

2D Organic Materials: Status and Challenges

In the past few decades, 2D layer materials have gradually become a central focus in materials science owing to their uniquely layered structural qualities and good optoelectronic properties. However, in the development of 2D materials, several disadvantages, such as limited types of materials and the inability to synthesize large-scale materials, severely confine their application. Therefore, further exploration of new materials and preparation methods is necessary to meet technological developmental needs. Organic molecular materials have the advantage of being customizable. Therefore, if organic molecular and 2D materials are combined, the resulting 2D organic materials would have excellent optical and electrical properties. In addition, through this combination, the free design and large-scale synthesis of 2D materials can be realized in principle. Furthermore, 2D organic materials exhibit excellent properties and unique functionalities along with great potential for developing sensors, biomedicine, and electronics. In this review, 2D organic materials are divided into five categories. The preparation methods and material properties of each class of materials are also described in detail. Notably, to comprehensively understand each material's advantages, the latest research applications for each material are presented in detail and summarized. Finally, the future development and application prospects of 2D organic materials are briefly discussed.

Enhancing the Photocatalytic Degradation Efficiency of Dyes of Copper-Based Metal-Organic Frameworks through a Dimension-Induced Structural Strategy

Photocatalytic degradation of pollutants is an effective environment purification strategy. Metal-organic frameworks (MOFs) have attracted extensive attention in the field of photocatalysis owing to their structural diversity, uniform cavity, and large specific surface area. However, poor electrical conductivity, light absorption, and water stability restrict their development. The tailorable structure of MOFs may effectively overcome these limitations. Herein, three Cu-based MOFs (complexes 1-3) with one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) structures, respectively, were successfully prepared by introducing different uncoordinated ligands and adjusting the ligand/metal salt ratio. Among them, complex 1 with a 1D chain was constructed as a typical J-type aggregation by π-π stacking interactions between adjacent naphthalene rings. This intermolecular aggregation mode enhances strong exciton coupling between conjugated rings, reduces the transition energy, expands the intrinsic light absorption edge, and provides a channel for electron transport, thus improving the charge-separation efficiency. As expected, complex 1 with a 1D chain structure exhibited excellent Fenton-like catalytic activity. The apparent reaction rates were 3.2 and 2.0 times higher than those of 2D and 3D MOFs, respectively.

A robust hollow metal-organic framework with enhanced diffusion for size selective catalysis

Single crystalline (SC) hollow metal-organic frameworks (MOFs) are excellent host materials for molecular and nanoparticle catalysts. However, due to synthetic challenges, chemically robust SC hollow MOFs are rare. This work reports the construction of a defect-free and chemically stable SC hollow MOF, MOF-801(h), through templated growth from a unit cell mismatched core, UiO-66. Under the protection of excess MOF-801 ligand, fumaric acid, the MOF-801 shell was perfectly retained while the isoreticular UiO-66 core was selectively and completely etched away by formic acid. The combination of a large cavity, small aperture and short diffusion length allows the Pt nanoparticle encapsulated composite catalyst, Pt⊂MOF-801(h), to perform size selective hydrogenation of nitro compounds at an accelerated speed. Impressively, the catalyst can undergo concentrated HCl or boiling water treatment while maintaining its crystallinity, morphology, catalytic activity, and size selectivity. In addition, Au nanoparticles encapsulated catalyst, Au⊂MOF-801(h), was used for the size selective nucleophilic addition of HCl to terminal alkynes for the first time, which is a harsh reaction involving high concentrations of a strong acid.

Linker Scissoring Strategy Enables Precise Shaping of Metal-Organic Frameworks for Chromatographic Separation

Precise shaping of metal-organic frameworks (MOFs) is significant in both fundamental coordination chemistry and practical applications, such as catalysis, separation, and biomedicine. Herein, we demonstrated a linker scissoring strategy for precisely shaping MOFs through surface conformational pairing. In this strategy, the bidentate linkers which were designed according to the original tetratopic ligands and the coordination environment of MOF surfaces, were utilized as the covering agents. The shape of these covering agents and the surface conformation of metals onto MOFs restricted them to coordinate on specific MOF facets thus precisely controlling the shape of the MOFs. Different shapes of PCN-608 from nanoplate (PCN-NP) to nanorod (PCN-NR) have been targeted by adding different bidentate linkers. The universality of this strategy was demonstrated by controlling the shapes of the NU-MOFs from nanoplate to nanorod. This strategy provides a new guiding principle to synthesize MOF nanocrystals with controlled shapes.

2D MOF with Compact Catalytic Sites for the One‐pot Synthesis of 2,5‐Dimethylfuran from Saccharides via Tandem Catalysis

One pot synthesis of 2,5‐dimethylfuran (2,5‐DMF) from saccharides under mild conditions is of importance for the production of biofuel and fine chemicals. However, the synthesis requires a multitude of active sites and suffers from slow kinetics due to poor diffusion in most composite catalysts. Herein, a metal‐acid functionalized 2D metal‐organic framework (MOF; Pd/NUS‐SO₃H), as an ultrathin nanosheet of 3–4 nm with Lewis acid, Brønsted acid, and metal active sites, was prepared based on the diazo method for acid modification and subsequent metal loading. This new composite catalyst gives substantially higher yields of DMF than all reported catalysts for different saccharides (fructose, glucose, cellobiose, sucrose, and inulins). Characterization suggests that a cascade of reactions including polysaccharide hydrolysis, isomerization, dehydration, and hydrodeoxygenation takes place with rapid molecular interactions.

Two-Dimensional Metal-Organic Framework Nanosheets: Synthesis and Applications in Electrocatalysis and Photocatalysis

Two-dimensional metal-organic nanosheets (2D MONs) are an emerging class of ultrathin, porous, and crystalline materials. The organic/inorganic hybrid nature offers MONs distinct advantages over other inorganic nanosheets in terms of diversity of organic ligands and metal notes. Compared to bulk three-dimensional metal-organic frameworks, 2D MONs possess merits of high density and readily accessible catalytic sites, reduced diffusion pathways for reactants/products, and fast electron transport. These features endow MONs with enhanced physical/chemical properties and are ideal for heterogeneous catalysis. In this Review, state-of-the-art synthetic methods for the fabrication of 2D MONs were summarized. The advances of 2D MONs-based materials for electrocatalysis and photocatalysis, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂ RR), and electro-/photocatalytic organic transformations were systematically discussed. Finally, the challenges and perspectives regarding future design and synthesis of 2D MONs for high-performance electrocatalysis and photocatalysis were provided.

Assembling Metal Organic Layer Composites for High-Performance Electrocatalytic CO2 Reduction to Formate

2D metal-organic-framework (MOF) based composites have emerged as promising candidates for electrocatalysis due to their high structural flexibility and fully exposed active sites. Herein, a freestanding metal-organic layer (MOL) with a 2D kgd (kagome dual) lattice was constructed with abundant surface oxygenate groups serving as anchoring sites to immobilize diverse guests. Taking Bi as an example, tetragonal Bi2 O3 nanowires can be uniformly grown on MOLs after solvothermal treatment, the structural evolution of which was followed by ex situ electron microscopy. The as-prepared Bi2 O3 /MOL exhibits excellent CO2 electroreduction activity towards formate reaching a specific current of 2.3 A mgBi -1 and Faradaic efficiencies of over 85 % with a wide potential range from -0.87 to -1.17 V, far surpassing Bi2 O3 /UiO (a 3D Zr6 -oxo based MOF) and Bi2 O3 /AB (Acetylene Black). Such a post-synthetic modification strategy can be flexibly extended to develop versatile MOL composites, highlighting the superiority of optimizing MOL-based composites for electrocatalysis.

Fabrication of Two-Dimensional Metal-Organic Framework Nanosheets through Crystal Dissolution-Growth Kinetics

Controlling the morphology of the metal-organic framework (MOF) for nanosheets is beneficial for understanding their crystal growth kinetics and useful for extending these MOF nanosheets to advanced applications, in particular for gas separation and device integration. However, synthesizing MOF nanosheets with uniform thickness or desirable size still remains challenging. Herein, we provide a crystal dissolution-growth strategy for fabricating dispersible porphyrin MOF nanosheets with lateral dimensions and nanometer thickness. A morphological transition (bulk crystals-nanosheets-bulk crystals) in Zn-TCPP was observed when controlling the crystal growth kinetics by adjusting the reaction parameters (temperature and acidity). These findings encouraged the synthesis of other types of nanosheets (Cu-TCPP, Zn-TCPP (Pd), and Cu-BDC nanosheets). Zn-TCPP (Pd) nanosheets were applied in field-effect transistors and exhibited photoresponse characteristics. This work demonstrates a new strategy for obtaining MOF nanosheets and casts a new light upon fabricating two-dimensional inorganic-organic hybrid materials with controlled thickness.

Active mechanisorption driven by pumping cassettes

[Figure: see text].

Electrochemical Ammonia Synthesis via NO Reduction on 2D-MOF

Developing new catalysts, which effectively promote electrocatalytic NO reduction (ENOR), is very important for the industrial field. A two-dimensional (2D) metal-organic framework (MOF) with hexaaminobenzene (HAB) ligands (TM-HAB MOF, TM = Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Mo, Ru, Rh and Pd) as an electrocatalyst of ENOR has been systematically explored in this work by means of well-defined density functional theory (DFT) calculations. We predicted the impacts of the coordination structure of different MOFs on its catalytic performance, and found that the suitable candidates are the Co- and Rh-HAB MOFs due to moderate binding strength between NO and substrates. The further calculation indicated that Co-HAB MOF has the best ENOR catalytic activity with a limiting potential of -0.26 V toward NH 3 product at low NO coverage, yet NO reduction to N 2 O at high NO coverage has been limited due to high limiting potential. The scaling relationship with a good correlation coefficient between several electronic properties and the adsorption Gibbs free energy change of *NO (ΔG *NO ) were found, which implied that ΔG *NO can be used as a simple descriptor for screening out suitable electrocatalysts. This work offers a new paradigm for ENOR toward NH 3 under ambient conditions.

Fabrication of Ultrathin Membranes Using 2D-MOF Nanosheets for Tunable Gas Separation

Two-dimensional (2D) metal-organic frameworks (MOF) nanosheets have emerged as novel membrane materials for gas separation. However, the development of ultrathin MOF membranes with tunable separation performances is still a challenge. Herein, we developed a facile GO-assisted restacking method to fabricate defect-free membranes with monolayer Zr-BTB nanosheets. Obtained ultrathin membranes ranging from 130 nm to 320 nm show tunable separation performances and exceed the 2008 Robeson upper bound by changing the amount of nanolayers in vertical stacking direction. Furthermore, a heating filtration method was used to change the restacking process of nanosheets in the horizontal direction. As a result, H₂ /CO₂ selectivity can be enhanced by two times with the same membrane thickness (130 nm) and H₂ permeance is almost maintained to be 7.0×10^-7  mol m^-2  s^-1  pa^-1 . This method may provide a possible way to efficiently tune the gas separation performances of MOF membranes.

Facile Synthesis of Two-Dimensional Iron/Cobalt Metal-Organic Framework for Efficient Oxygen Evolution Electrocatalysis

A facile synthesis is reported of two-dimensional (2D) bimetallic (Fe/Co=1:2) metal-organic frameworks (MOF, ca. 2.2 nm thick) via simple stirring of the reaction mixture of Fe/Co salts and 1,4-benzene dicarboxylic acid (1,4-BDC) in the presence of triethylamine and water at room temperature. The mechanism of the 2D, rather than bulk, MOF was revealed by studying the role of each component in the reaction mixture. It was found that these 2D MOF-Fe/Co(1:2) exhibited excellent electrocatalytic activity for the oxygen evolution reaction (OER) under basic conditions. The electrocatalytic mechanism was disclosed via both experimental results and density functional theory (DFT) calculation. The 2D morphology and co-doping of Fe/Co contributed to the superior OER performance of the 2D MOF-Fe/Co(1:2). The simple and efficient synthetic method is suitable for the mass production and future commercialization of functional 2D MOF with low cost and high yield.

Macroscopic Ultralight Aerogel Monoliths of Imine-based Covalent Organic Frameworks

The use of covalent organic frameworks (COFs) in practical applications demands shaping them into macroscopic objects, which remains challenging. Herein, we report a simple three-step method to produce COF aerogels, based on sol-gel transition, solvent-exchange, and supercritical CO₂ drying, in which 2D imine-based COF sheets link together to form hierarchical porous structures. The resultant COF aerogel monoliths have extremely low densities (ca. 0.02 g cm^-3 ), high porosity (total porosity values of ca. 99 %), and mechanically behave as elastic materials under a moderate strain (<25-35 %) but become plastic under greater strain. Moreover, these COF aerogels maintain the micro- and meso-porosity of their constituent COFs, and show excellent absorption capacity (e.g. toluene uptake: 32 g g^-1 ), with high removal efficiency (ca. 99 %). The same three-step method can be used to create functional composites of these COF aerogels with nanomaterials.

An Imine-Linked Metal-Organic Framework as a Reactive Oxygen Species Generator

A new metal-organic framework (MOF) with both coordination linkages and covalent linkages is prepared by coordinating Cu^I with pyrazolate for an aldehyde-functionalized trinuclear complex, and subsequent imine condensation with p-phenylenediamine, a reaction typical for covalent organic framework (COF) synthesis. This MOF×COF collaboration yields FDM-71 with honeycomb layers stacked in eclipsed fashion. After dissociating the Cu^I -pyrazolate coordination in FDM-71, the obtained organic components carry the information of structural defects, and thus vacancy identity (aldehyde-based unit vacancy and amine-based unit vacancy) and concentration are definitely resolved. Further to the redox catalytic activity inherited from the complex, FDM-71 features effective photosensitizing activity. The two functions integrated in one well-defined structure is demonstrated by its high efficiency in decomposing H₂ O₂ and consequent excitation of O₂ to reactive oxygen species.

Recent Advances in Catalytic Hydrosilylations: Developments beyond Traditional Platinum Catalysts

Hydrosilylation reactions, which allow the addition of Si-H to C=C/C≡C bonds, are typically catalyzed by homogeneous noble metal catalysts (Pt, Rh, Ir, and Ru). Although excellent activity and selectivity can be obtained, the price, purification, and metal residues of these precious catalysts are problems in the silicone industry. Thus, a strong interest in more sustainable catalysts and for more economic processes exists. In this respect, recently disclosed hydrosilylations using catalysts based on earth-abundant transition metals, for example, Fe, Co, Ni, and Mn, and heterogeneous catalysts (supported nanoparticles and single-atom sites) are noteworthy. This minireview describes the recent advances in this field.

Beyond Frameworks: Structuring Reticular Materials across Nano-, Meso-, and Bulk Regimes

Reticular materials are of high interest for diverse applications, ranging from catalysis and separation to gas storage and drug delivery. These open, extended frameworks can be tailored to the intended application through crystal-structure design. Implementing these materials in application settings, however, requires structuring beyond their lattices, to interface the functionality at the molecular level effectively with the macroscopic world. To overcome this barrier, efforts in expressing structural control across molecular, nano-, meso-, and bulk regimes is the essential next step. In this Review, we give an overview of recent advances in using self-assembly as well as externally controlled tools to manufacture reticular materials over all the length scales. We predict that major research advances in deploying these two approaches will facilitate the use of reticular materials in addressing major needs of society.

Functionalization of Zirconium-Based Metal-Organic Layers with Tailored Pore Environments for Heterogeneous Catalysis

Intriguing properties and functions are expected to implant into metal-organic layers (MOLs) to achieve tailored pore environments and multiple functionalities owing to the synergies among multiple components. Herein, we demonstrate a facile one-pot synthetic strategy to incorporate multiple functionalities into stable zirconium MOLs via secondary ligand pillaring. Through the combination of Zr₆ -BTB (BTB=benzene-1,3,5-tribenzoate) layers and diverse secondary ligands (including ditopic and tetratopic linkers), 31 MOFs with multi-functionalities were systematically prepared. Notably, a metal-phthalocyanine fragment was successfully incorporated into this Zr-MOL system, giving rise to an ideal platform for the selective oxidation of anthracene. The organic functionalization of two-dimensional MOLs can generate tunable porous structures and environments, which may facilitate the excellent catalytic performance of as-synthesized materials.

Synthesis of micro/nanoscaled metal–organic frameworks and their direct electrochemical applications

Developing strategies to control the morphology and size of MOFs is important for their applications in batteries, supercapacitors and electrocatalysis. This review focuses on the design and fabrication of MOFs at the micro/nanoscale.

Metal-Organic Layers Catalyze Photoreactions without Pore Size and Diffusion Limitations

Metal-organic frameworks (MOFs) have emerged as promising single-site solid catalysts for organic reactions. However, MOF catalysts suffer from pore size limitation and slow diffusion, which are detrimental for photoreactions. Metal-organic layers (MOLs) have unique ultrathin 2D monolayer structures and overcome pore size and diffusion limitations. Here, the synthesis of photoactive Zr-RuBPY MOL based on Zr-oxo clusters and [Ru(bpy)₃ ]²⁺ -containing linkers is reported as well as its application in photocatalytic [2+2] cyclizations of enones and Meerwein addition reactions between aryl diazonium salts, styrenes, and nitriles.

Catalytic Transfer Hydrogenation of Biomass-Derived Carbonyls over Hafnium-Based Metal-Organic Frameworks

A series of highly crystalline, porous, hafnium-based metal-organic frameworks (Hf-MOFs) have been shown to catalyze the transfer hydrogenation reaction of levulinic ester to produce γ-valerolactone by using isopropanol as a hydrogen donor. The results are compared with their zirconium-based counterparts. The role of the metal center in Hf-MOFs has been identified and reaction parameters optimized. NMR studies using isotopically labeled isopropanol provide evidence that the transfer hydrogenation occurs through a direct intermolecular hydrogen transfer route. The catalyst, Hf-MOF-808, can be recycled several times with only a minor decrease in catalytic activity. The generality of the procedure has been demonstrated by accomplishing the transformation with aldehydes, ketones, and α,β-unsaturated carbonyl compounds. The combination of Hf-MOF-808 with the Brønsted-acidic Al-Beta zeolite gives the four-step one-pot transformation of furfural to γ-valerolactone in good yield of 75 %.

Nanoscale Metal-Organic Layers for Deeply Penetrating X-ray-Induced Photodynamic Therapy

We report the rational design of metal-organic layers (MOLs) that are built from [Hf6 O4 (OH)4 (HCO2 )6 ] secondary building units (SBUs) and Ir[bpy(ppy)2 ]+ - or [Ru(bpy)3 ]2+ -derived tricarboxylate ligands (Hf-BPY-Ir or Hf-BPY-Ru; bpy=2,2'-bipyridine, ppy=2-phenylpyridine) and their applications in X-ray-induced photodynamic therapy (X-PDT) of colon cancer. Heavy Hf atoms in the SBUs efficiently absorb X-rays and transfer energy to Ir[bpy(ppy)2 ]+ or [Ru(bpy)3 ]2+ moieties to induce PDT by generating reactive oxygen species (ROS). The ability of X-rays to penetrate deeply into tissue and efficient ROS diffusion through ultrathin 2D MOLs (ca. 1.2 nm) enable highly effective X-PDT to afford superb anticancer efficacy.