Tailoring Copper Nanocrystals towards C 2 Products in Electrochemical CO 2 Reduction

Engineering highly selective CO2 electroreduction in Cu-based perovskites through A-site cation manipulation

Perovskites exhibit considerable potential as catalysts for various applications, yet their performance modulation in the carbon dioxide reduction reaction (CO2RR) remains underexplored. In this study, we report a strategy to enhance the electrocatalytic carbon dioxide (CO2) reduction activity via Ce-doped La2CuO4 (LCCO) and Sr-doped La2CuO4 (LSCO) perovskite oxides. Specifically, compared to pure phase La2CuO4 (LCO), the Faraday efficiency (FE) for CH4 of LCCO at -1.4 V vs. RHE (reversible hydrogen electrode) is improved from 38.9% to 59.4%, and the FECO2RR of LSCO increased from 68.8% to 85.4%. In situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy spectra results indicate that the doping of A-site ions promotes the formation of *CHO and *HCOO, which are key intermediates in the production of CH4, compared to the pristine La2CuO4. X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and double-layer capacitance (Cdl) outcomes reveal that heteroatom-doped perovskites exhibit more oxygen vacancies and higher electrochemical active surface areas, leading to a significant improvement in the CO2RR performance of the catalysts. This study systematically investigates the effect of A-site ion doping on the catalytic activity center Cu and proposes a strategy to improve the catalytic performance of perovskite oxides.

Cu-Based Materials for Enhanced C2+ Product Selectivity in Photo-/Electro-Catalytic CO2 Reduction: Challenges and Prospects

Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO2, Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C2+ compounds through C-C coupling process. Herein, the basic principles of photocatalytic CO2 reduction reactions (PCO2RR) and electrocatalytic CO2 reduction reaction (ECO2RR) and the pathways for the generation C2+ products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO2RR and ECO2RR is emphasized. Through a review of recent studies on PCO2RR and ECO2RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C2+ products. Finally, the opportunities and challenges associated with Cu-based materials in the CO2 catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO2 reduction processes in the future.

Orange Peel Biomass-derived Carbon Supported Cu Electrocatalysts Active in the CO2 -Reduction to Formic Acid

We report a green, wet chemistry approach towards the production of C-supported Cu electrocatalysts active in the CO₂ reduction to formic acid. We use citrus peels as a C support precursor and as a source of reducing agents for the Cu cations. We show that orange peel is a suitable starting material compared to lemon peel for the one-pot hydrothermal synthesis of Cu nanostructures affording better Cu dispersion as well as productivity and selectivity towards formic acid. We rationalize this finding in terms of the beneficial chemical composition of the orange peel, which favors both the reduction of the Cu precursor as well as the carbon matrix. This work demonstrates new viable opportunities for the reuse of citrus waste on a rational basis.

Surface and Interface Engineering for the Catalysts of Electrocatalytic CO2 Reduction

The massive use of fossil fuels releases a great amount of CO₂ , which substantially contributes to the global warming. For the global goal of putting CO₂ emission under control, effective utilization of CO₂ is particularly meaningful. Electrocatalytic CO₂ reduction reaction (eCO₂ RR) has great potential in CO₂ utilization, because it can convert CO₂ into valuable carbon-containing chemicals and feedstock using renewable electricity. The catalyst design for eCO₂ RR is a key challenge to achieving efficient conversion of CO₂ to fuels and useful chemicals. For a typical heterogeneous catalyst, surface and interface engineering is an effective approach to enhance reaction activity. Herein, the development and research progress in CO₂ catalysts with focus on surface and interface engineering are reviewed. First, the fundaments of eCO₂ RR is briefly discussed from the reaction mechanism to performance evaluation methods, introducing the role of the surface and interface engineering of electrocatalyst in eCO₂ RR. Then, several routes to optimize the surface and interface of CO₂ electrocatalysts, including morphology, dopants, atomic vacancies, grain boundaries, surface modification, etc., are reviewed and representative examples are given. At the end of this review, we share our personal views in future research of eCO₂ RR.

Copper-Based Catalysts for Electrochemical Reduction of Carbon Dioxide to Ethylene

Electrochemical reduction of CO₂ into high energy density multi-carbon chemicals or fuels (e. g., ethylene) via new renewable energy storage has extraordinary implications for carbon neutrality. Copper (Cu)-based catalysts have been recognized as the most promising catalysts for the electrochemical reduction of CO₂ to ethylene (C₂ H₄ ) due to their moderate CO adsorption energy and moderate hydrogen precipitation potential. However, the poor selectivity, low current density and high overpotential of the CO₂ RR into C₂ H₄ greatly limit its industrial applications. Meanwhile, the complex reaction mechanism is still unclear, which leads to blindness in the design of catalysts. Herein, we systematically summarized the latest research, proposed possible conversion mechanisms and categorized the general strategies to adjust of the structure and composition for CO₂ RR, such as tip effect, defect engineering, crystal plane catalysis, synergistic effect, nanoconfinement effect and so on. Eventually, we provided a prospect of the future challenges for further development and progress in CO₂ RR. Previous reviews have summarized catalyst designs for the reduction of CO₂ to multi-carbon products, while lacking in targeting C₂ H₄ alone, an important industrial feedstock. This Review mainly aims to provide a comprehensive understanding for the design strategies and challenges of electrocatalytic CO₂ reduction to C₂ H₄ through recent researches and further propose some guidelines for the future design of copper-based catalysts for electroreduction of CO₂ to C₂ H₄ .

Cu-based Organic-Inorganic Composite Materials for Electrochemical CO2 Reduction

Electrochemical CO2 reduction reaction (CO2RR) is an attractive pathway to convert CO2 into value-added chemicals and fuels. Copper (Cu) is the most effective monometallic catalyst for converting CO2 into multi-carbon products, but suffers from high overpotentials and poor selectivity. Therefore, it is essential to design efficient Cu-based catalyst to improve the selectivity of specific products. Due to the combination of advantages of organic and inorganic composite materials, organic-inorganic composites exhibit high catalytic performance towards CO2RR, and have been extensively studied. In this review, the research advances of various Cu-based organic-inorganic composite materials in CO2RR, i.e., organic molecular modified-metal Cu composites, Cu-based molecular catalyst/carbon carrier composites, Cu-based metal organic framework (MOF) composites, and Cu-based covalent organic framework (COF) composites are systematically summarized. Particularly, the synthesis strategies of Cu-based composites, structure-performance relationship, and catalytic mechanisms are discussed. Finally, the opportunities and challenges of Cu-based organic-inorganic composite materials in CO2RR are proposed.

Recent Advancement of the Current Aspects of g-C3 N4 for its Photocatalytic Applications in Sustainable Energy System

Being one of the foremost enticing and intriguing innovations, heterogeneous photocatalysis has also been used to effectively gather, transform, and conserve sustainable sun's radiation for the production of efficient and clean fossil energy as well as a wide range of ecological implications. The generation of solar fuel-based water splitting and CO₂ photoreduction is excellent for generating alternative resources and reducing global warming. Developing an inexpensive photocatalyst can effectively split water into hydrogen (H₂ ), oxygen (O₂ ) sources, and carbon dioxide (CO₂ ) into fuel sources, which is a crucial problem in photocatalysis. The metal-free g-C₃ N₄ photocatalyst has a high solar fuel generation potential. This review covers the most recent advancements in g-C₃ N₄ preparation, including innovative design concepts and new synthesis methods, and novel ideas for expanding the light absorption of pure g-C₃ N₄ for photocatalytic application. Similarly, the main issue concerning research and prospects in photocatalysts based g-C₃ N₄ was also discussed. The current dissertation provides an overview of comprehensive understanding of the exploitation of the extraordinary systemic and characteristics, as well as the fabrication processes and uses of g-C₃ N₄ .

Heat-treated copper phthalocyanine on carbon toward electrochemical CO2 conversion into ethylene boosted by oxygen reduction

Heat-treated copper phthalocyanine on carbon demonstrates high C2H4 selectivity at a low potential due to the in situ generated OH−.

A Reconstructed Cu2 P2 O7 Catalyst for Selective CO2 Electroreduction to Multicarbon Products

The electrochemical CO₂ reduction reaction (CO₂ RR) over Cu-based catalysts shows great potential for converting CO₂ into multicarbon (C₂₊ ) fuels and chemicals. Herein, we introduce an A₂ M₂ O₇ structure into a Cu-based catalyst through a solid-state reaction synthesis method. The Cu₂ P₂ O₇ catalyst is electrochemically reduced to metallic Cu with a significant structure evolution from grain aggregates to highly porous structure under CO₂ RR conditions. The reconstructed Cu₂ P₂ O₇ catalyst achieves a Faradaic efficiency of 73.6 % for C₂₊ products at an applied current density of 350 mA cm^-2 , remarkably higher than the CuO counterparts. The reconstructed Cu₂ P₂ O₇ catalyst has a high electrochemically active surface area, abundant defects, and low-coordinated sites. In situ Raman spectroscopy and density functional theory calculations reveal that CO adsorption with bridge and atop configurations is largely improved on Cu with defects and low-coordinated sites, which decreased the energy barrier of the C-C coupling reaction for C₂₊ products.

Highly Selective Tandem Electroreduction of CO2 to Ethylene over Atomically Isolated Nickel-Nitrogen Site/Copper Nanoparticle Catalysts

Herein, an effective tandem catalysis strategy is developed to improve the selectivity of the CO₂ RR towards C₂ H₄ by multiple distinct catalytic sites in local vicinity. An earth-abundant elements-based tandem electrocatalyst PTF(Ni)/Cu is constructed by uniformly dispersing Cu nanoparticles (NPs) on the porphyrinic triazine framework anchored with atomically isolated nickel-nitrogen sites (PTF(Ni)) for the enhanced CO₂ RR to produce C₂ H₄ . The Faradaic efficiency of C₂ H₄ reaches 57.3 % at -1.1 V versus the reversible hydrogen electrode (RHE), which is about 6 times higher than the non-tandem catalyst PTF/Cu, which produces CH₄ as the major carbon product. The operando infrared spectroscopy and theoretic density functional theory (DFT) calculations reveal that the local high concentration of CO generated by PTF(Ni) sites can facilitate the C-C coupling to form C₂ H₄ on the nearby Cu NP sites. The work offers an effective avenue to design electrocatalysts for the highly selective CO₂ RR to produce multicarbon products via a tandem route.

Facet-Selective Deposition of Ultrathin Al2 O3 on Copper Nanocrystals for Highly Stable CO2 Electroreduction to Ethylene

Catalysts based on Cu nanocrystals (NCs) for electrochemical CO₂ -to-C₂₊ conversion with high activity have been a subject of considerable interest, but poor stability and low selectivity for a single C₂₊ product remain obstacles for realizing sustainable carbon-neutral cycles. Here, we used the facet-selective atomic layer deposition (FS-ALD) technique to selectively cover the (111) surface of Cu NCs with ultrathin Al₂ O₃ to increase the exposed facet ratio of (100)/(111), resulting in a faradaic efficiency ratio of C₂ H₄ /CH₄ for overcoated Cu NCs 22 times higher than that for pure Cu NCs. Peak performance of the overcoated catalyst (Cu NCs/Al₂ O₃ -10C) reaches a C₂ H₄ faradaic efficiency of 60.4 % at a current density of 300 mA cm^-2 in 5 M KOH electrolyte, when using a gas diffusion electrode flow cell. Moreover, the Al₂ O₃ overcoating effectively suppresses the dynamic mobility and the aggregation of Cu NCs, which explains the negligible activity loss and selectivity degradations of Cu NCs/Al₂ O₃ -10C shown in stability tests.

Subsurface-Carbon-Induced Local Charge of Copper for an On-Surface Displacement Reaction

Transition-metal carbides have sparked unprecedented enthusiasm as high-performance catalysts in recent years. Still, the catalytic properties of copper carbide remain unexplored. By introducing subsurface carbon to Cu(111), a displacement reaction of a proton in a carboxyl acid group with a single Cu atom is demonstrated at the atomic scale and room temperature. Its occurrence is attributed to the C-doping-induced local charge of surface Cu atoms (up to +0.30 e/atom), which accelerates the rate of on-surface deprotonation via reduction of the corresponding energy barrier, thus enabling the instant displacement of a proton with a Cu atom when the molecules adsorb on the surface. This well-defined and robust Cu^δ+ surface based on subsurface-carbon doping offers a novel catalytic platform for on-surface synthesis.

Identifying Structure-Selectivity Correlations in the Electrochemical Reduction of CO2 : A Comparison of Well-Ordered Atomically Clean and Chemically Etched Copper Single-Crystal Surfaces

The identification of the active sites for the electrochemical reduction of CO2 (CO2 RR) to specific chemical products is elusive, owing in part to insufficient data gathered on clean and atomically well-ordered electrode surfaces. Here, ultrahigh vacuum based preparation methods and surface science characterization techniques are used with gas chromatography to demonstrate that subtle changes in the preparation of well-oriented Cu(100) and Cu(111) single-crystal surfaces drastically affect their CO2 RR selectivity. Copper single crystals with clean, flat, and atomically ordered surfaces are predicted to yield hydrocarbons; however, these were found experimentally to favor the production of H2 . Only when roughness and defects are introduced, for example by electrochemical etching or a plasma treatment, are significant amounts of hydrocarbons generated. These results show that structural and morphological effects are the key factors determining the catalytic selectivity of CO2 RR.

Linking the Dynamic Chemical State of Catalysts with the Product Profile of Electrocatalytic CO2 Reduction

The promoted activity and enhanced selectivity of electrocatalysts is commonly ascribed to specific structural features such as surface facets, morphology, and atomic defects. However, unraveling the factors that really govern the direct electrochemical reduction of CO₂ (CO₂ RR) is still very challenging since the surface state of electrocatalysts is dynamic and difficult to predict under working conditions. Moreover, theoretical predictions from the viewpoint of thermodynamics alone often fail to specify the actual configuration of a catalyst for the dynamic CO₂ RR process. Herein, we re-survey recent studies with the emphasis on revealing the dynamic chemical state of Cu sites under CO₂ RR conditions extracted by in situ/operando characterizations, and further validate a critical link between the chemical state of Cu and the product profile of CO₂ RR. This point of view provides a generalizable concept of dynamic chemical-state-driven CO₂ RR selectivity that offers an inspiration in both fundamental understanding and efficient electrocatalysts design.

Recent advances on enhancing the multicarbon selectivity of nanostructured Cu-based catalysts

The rapid development and affordability of renewable energy sources necessitate innovative energy storage technologies to compensate for their intermittency. The electrochemical reduction of CO2 presents an attractive strategy for renewable energy storage, with considerable advancements in recent years. Copper-based catalysts have spearheaded this progress due to their intrinsic ability to produce valuable multicarbon reaction products. However, Cu is inherently unselective, and considerable efforts are needed to achieve the selective production of multicarbon reaction products on Cu-based catalysts. A multitude of factors affect the selectivity of Cu-catalysts, such as morphology, metal co-catalysts, and incorporation of oxidizing agents. In this review, we have summarized the current progress and the most important strategies for tuning the selectivity towards multicarbon reaction products over nanostructured Cu-based catalysts.

Operando Investigation of Ag-Decorated Cu2 O Nanocube Catalysts with Enhanced CO2 Electroreduction toward Liquid Products

Direct conversion of carbon dioxide into multicarbon liquid fuels by the CO2 electrochemical reduction reaction (CO2 RR) can contribute to the decarbonization of the global economy. Here, well-defined Cu2 O nanocubes (NCs, 35 nm) uniformly covered with Ag nanoparticles (5 nm) were synthesized. When compared to bare Cu2 O NCs, the catalyst with 5 at % Ag on Cu2 O NCs displayed a two-fold increase in the Faradaic efficiency for C2+ liquid products (30 % at -1.0 VRHE ), including ethanol, 1-propanol, and acetaldehyde, while formate and hydrogen were suppressed. Operando X-ray absorption spectroscopy revealed the partial reduction of Cu2 O during CO2 RR, accompanied by a reaction-driven redispersion of Ag on the CuOx  NCs. Data from operando surface-enhanced Raman spectroscopy further uncovered significant variations in the CO binding to Cu, which were assigned to Ag-Cu sites formed during CO2 RR that appear crucial for the C-C coupling and the enhanced yield of liquid products.

Electrochemical Reduction of Carbon Dioxide to Ethanol: An Approach to Transforming Greenhouse Gas to Fuel Source

Converting carbon dioxide (CO₂ ) into high-value fuels or chemicals is considered as a promising way to utilize CO₂ and alleviate the excessive greenhouse gas emission. Among multiple catalysis approaches, electrochemical reduction of CO₂ to ethanol has an important prospect due to the high energy density and widely applications of ethanol. In recent years, many electrocatalysts for CO₂ reduce reaction (CO₂ RR) have shown promising catalytic activity for ethanol production. In this review, we will introduce the recent progress in this field. The basic principles and electrochemical performances of CO₂ RR are reviewed at first. Then, several categories of active electrocatalysts for CO₂ RR to ethanol are summarized, including the discussion of reaction mechanism and catalytic sites. Finally, several possible strategies are proposed, providing guidance for future design and preparation of high-performance catalysts.

Unveiling the Synergistic Effect between Graphitic Carbon Nitride and Cu2 O toward CO2 Electroreduction to C2 H4

Electrochemically reducing carbon dioxide (CO₂ RR) to ethylene is one of the most promising strategies to reduce carbon dioxide emissions and simultaneously produce high value-added chemicals. However, the lack of catalysts with excellent activity and stability limits the large-scale application of this technology. In this work, a graphitic carbon nitride (g-C₃ N₄ )-supported Cu₂ O composite was fabricated, which exhibited a 32.2 % faradaic efficiency of C₂ H₄ with a partial current density of -4.3 mA cm^-2 at -1.1 V vs. reversible hydrogen electrode in 0.1 m KHCO₃ electrolyte. The introduction of g-C₃ N₄ support not only enhanced the uniform dispersion of Cu₂ O nanocubes, but also stabilized the important *CO intermediates. Moreover, the g-C₃ N₄ itself had a good activity of reducing CO₂ to form *CO, which enriched the key intermediates of C-C coupling around cuprous oxide. The findings highlight the importance of the g-C₃ N₄ support, a unique two-dimensional material, including not only the strong CO₂ adsorption and activation capacity but also its synergistic effect with the cuprous oxide in CO₂ RR selectivity.

Controlling the Surface Oxidation of Cu Nanowires Improves Their Catalytic Selectivity and Stability toward C2+ Products in CO2 Reduction

Copper nanostructures are promising catalysts for the electrochemical reduction of CO₂ because of their unique ability to produce a large proportion of multi-carbon products. Despite great progress, the selectivity and stability of such catalysts still need to be substantially improved. Here, we demonstrate that controlling the surface oxidation of Cu nanowires (CuNWs) can greatly improve their C₂₊ selectivity and stability. Specifically, we achieve a faradaic efficiency as high as 57.7 and 52.0 % for ethylene when the CuNWs are oxidized by the O₂ from air and aqueous H₂ O₂ , respectively, and both of them show hydrogen selectivity below 12 %. The high yields of C₂₊ products can be mainly attributed to the increase in surface roughness and the generation of defects and cavities during the electrochemical reduction of the oxide layer. Our results also indicate that the formation of a relatively thick, smooth oxide sheath can improve the catalytic stability by mitigating the fragmentation issue.

Electrocatalytic CO2 Reduction on CuOx Nanocubes: Tracking the Evolution of Chemical State, Geometric Structure, and Catalytic Selectivity using Operando Spectroscopy

The direct electrochemical conversion of carbon dioxide (CO2 ) into multi-carbon (C2+ ) products still faces fundamental and technological challenges. While facet-controlled and oxide-derived Cu materials have been touted as promising catalysts, their stability has remained problematic and poorly understood. Herein we uncover changes in the chemical and morphological state of supported and unsupported Cu2 O nanocubes during operation in low-current H-Cells and in high-current gas diffusion electrodes (GDEs) using neutral pH buffer conditions. While unsupported nanocubes achieved a sustained C2+ Faradaic efficiency of around 60 % for 40 h, the dispersion on a carbon support sharply shifted the selectivity pattern towards C1 products. Operando XAS and time-resolved electron microscopy revealed the degradation of the cubic shape and, in the presence of a carbon support, the formation of small Cu-seeds during the surprisingly slow reduction of bulk Cu2 O. The initially (100)-rich facet structure has presumably no controlling role on the catalytic selectivity, whereas the oxide-derived generation of under-coordinated lattice defects, can support the high C2+ product yields.

Probing CO2 Reduction Pathways for Copper Catalysis Using an Ionic Liquid as a Chemical Trapping Agent

The key to fully leveraging the potential of the electrochemical CO2 reduction reaction (CO2RR) to achieve a sustainable solar-power-based economy is the development of high-performance electrocatalysts. The development process relies heavily on trial and error methods due to poor mechanistic understanding of the reaction. Demonstrated here is that ionic liquids (ILs) can be employed as a chemical trapping agent to probe CO2RR mechanistic pathways. This method is implemented by introducing a small amount of an IL ([BMIm][NTf2 ]) to a copper foam catalyst, on which a wide range of CO2RR products, including formate, CO, alcohols, and hydrocarbons, can be produced. The IL can selectively suppress the formation of ethylene, ethanol and n-propanol while having little impact on others. Thus, reaction networks leading to various products can be disentangled. The results shed new light on the mechanistic understanding of the CO2RR, and provide guidelines for modulating the CO2RR properties. Chemical trapping using an IL adds to the toolbox to deduce the mechanistic understanding of electrocatalysis and could be applied to other reactions as well.

Electrocatalysis as the Nexus for Sustainable Renewable Energy: The Gordian Knot of Activity, Stability, and Selectivity

The use of renewable energy by means of electrochemical techniques by converting H2 O, CO2 and N2 into chemical energy sources and raw materials, is the basis for securing a future sustainable "green" energy supply. Some weaknesses and inconsistencies in the practice of determining the electrocatalytic performance, which prevents a rational bottom-up catalyst design, are discussed. Large discrepancies in material properties as well as in electrocatalytic activity and stability become obvious when materials are tested under the conditions of their intended use as opposed to the usual laboratory conditions. They advocate for uniform activity/stability correlations under application-relevant conditions, and the need for a clear representation of electrocatalytic performance by contextualization in terms of functional investigation or progress towards application is emphasized.

SnO2-Modified Two-Dimensional CuO for Enhanced Electrochemical Reduction of CO2 to C2H4

Electrochemical reduction of CO₂ was a widespread method for CO₂ conversion into valuable chemical fuel. C₂H₄ is an important product from CO₂ reduction. However, conversion of CO₂ into the hydrocarbon C₂H₄ faced large energy barriers. Herein, we, for the first time, achieve a high efficiency for electrochemical conversion of CO₂ to C₂H₄ on a tin-modified CuO. By modifying with Sn, we obtained a related low onset potential of C₂H₄ as positive as -0.8 V versus RHE and a high Faradaic efficiency of C₂H₄ as high as 22% at -1.0 V (vs RHE). According to density functional calculation, the Sn dopant mainly enriched the electron density of CuO, while it was electron-poor in the Sn dopants. The rate of CO₂ reduction can be enhanced on Cu nanosheets with higher electron density. We believed that this work would promote the development of two-dimensional catalysts for CO₂ conversion and deepen the understanding of doping on CO₂ reduction.

Stability and Degradation Mechanisms of Copper-Based Catalysts for Electrochemical CO2 Reduction

To date, copper is the only monometallic catalyst that can electrochemically reduce CO₂ into high value and energy-dense products, such as hydrocarbons and alcohols. In recent years, great efforts have been directed towards understanding how its nanoscale structure affects activity and selectivity for the electrochemical CO₂ reduction reaction (CO₂ RR). Furthermore, many attempts have been made to improve these two properties. Nevertheless, to advance towards applied systems, the stability of the catalysts during electrolysis is of great significance. This aspect, however, remains less investigated and discussed across the CO₂ RR literature. In this Minireview, the recent progress on understanding the stability of copper-based catalysts is summarized, along with the very few proposed degradation mechanisms. Finally, our perspective on the topic is given.

Polymer Lamellae as Reaction Intermediates in the Formation of Copper Nanospheres as Evidenced by In Situ X-ray Studies

The classical nucleation theory (CNT) is the most common theoretical framework used to explain particle formation. However, nucleation is a complex process with reaction pathways which are often not covered by the CNT. Herein, we study the formation mechanism of copper nanospheres using in situ X-ray absorption and scattering measurements. We reveal that their nucleation involves coordination polymer lamellae as pre-nucleation structures occupying a local minimum in the reaction energy landscape. Having learned this, we achieved a superior monodispersity for Cu nanospheres of different sizes. This report exemplifies the importance of developing a more realistic picture of the mechanism involved in the formation of inorganic nanoparticles to develop a rational approach to their synthesis.