Synthesis of Densely Packaged, Ultrasmall Pt 0 2 Clusters within a Thioether‐Functionalized MOF: Catalytic Activity in Industrial Reactions at Low Temperature

Thiol and thioether-based metal-organic frameworks: synthesis, structure, and multifaceted applications

Metal-organic frameworks (MOFs) are unique hybrid porous materials formed by combining metal ions or clusters with organic ligands. Thiol and thioether-based MOFs belong to a specific category of MOFs where one or many thiols or thioether groups are present in organic linkers. Depending on the linkers, thiol-thioether MOFs can be divided into three categories: (i) MOFs where both thiol or thioether groups are part of the carboxylic acid ligands, (ii) MOFs where only thiol or thioether groups are present in the organic linker, and (iii) MOFs where both thiol or thioether groups are part of azolate-containing linkers. MOFs containing thiol-thioether-based acid ligands are synthesized through two primary approaches; one is by utilizing thiol and thioether-based carboxylic acid ligands where the bonding pattern of ligands with metal ions plays a vital role in MOF formation (HSAB principle). MOFs synthesized by this approach can be structurally differentiated into two categories: structures without common structural motifs and structures with common structural motifs (related to UiO-66, UiO-67, UiO-68, MIL-53, NU-1100, etc.). The second approach to synthesize thiol and thioether-based MOFs is indirect methods, where thiol or thioether functionality is introduced in MOFs by techniques like post-synthetic modifications (PSM), post-synthetic exchange (PSE) and by forming composite materials. Generally, MOFs containing only thiol-thioether-based ligands are synthesized by interfacial assisted synthesis, forming two-dimensional sheet frameworks, and show significantly high conductivity. A limited study has been done on MOFs containing thiol-thioether-based azolate ligands where both nitrogen- and sulfur-containing functionality are present in the MOF frameworks. These materials exhibit intriguing properties stemming from the interplay between metal centres, organic ligands, and sulfur functionality. As a result, they offer great potential for multifaceted applications, ranging from catalysis, sensing, and conductivity, to adsorption. This perspective is organised through an introduction, schematic representations, and tabular data of the reported thiol and thioether MOFs and concluded with future directions.

Defined metal atom aggregates precisely incorporated into metal-organic frameworks

Nanosized metal aggregates (MAs), including metal nanoparticles (NPs) and nanoclusters (NCs), are often the active species in numerous applications. In order to maintain the active form of MAs in "use", they need to be anchored and stabilised, preventing agglomeration. In this context, metal-organic frameworks (MOFs), which exhibit a unique combination of properties, are of particular interest as a tunable and porous matrix to host MAs. A high degree of control in the synthesis towards atom-efficient and application-oriented MA@MOF composites is required to derive specific structure-property relationships and in turn to enable design of functions on the molecular level. Due to the versatility of MA@MOF (derived) materials, their applications are not limited to the obvious field of catalysis, but increasingly include 'out of the box' applications, for example medical diagnostics and theranostics, as well as specialised (bio-)sensoring techniques. This review focuses on recent advances in the controlled synthesis of MA@MOF materials en route to atom-precise MAs. The main synthetic strategies, namely 'ship-in-bottle', 'bottle-around-ship', and approaches to achieve novel hierarchical MA@MOF structures are highlighted and discussed while identifying their potential as well as their limitations. Hereby, an overview of standard characterisation methods that enable a systematic analysis procedure and state-of-art techniques that localise MA within MOF cavities are provided. While the perspectives of MA@MOF materials in general have been reviewed various times in the recent past, few atom-precise MAs inside MOFs have been reported so far, opening opportunities for future investigation.

Metal-Organic Frameworks as Unique Platforms to Gain Insight of σ-Hole Interactions for the Removal of Organic Dyes from Aquatic Ecosystems

The combination of high crystallinity and rich host-guest chemistry in metal-organic frameworks (MOFs), have situated them in an advantageous position, with respect to traditional porous materials, to gain insight on specific weak noncovalent supramolecular interactions. In particular, sulfur σ-hole interactions are known to play a key role in the biological activity of living beings as well as on relevant molecular recognitions processes. However, so far, they have been barely explored. Here, we describe both how the combination of the intrinsic features of MOFs, especially the possibility of using single-crystal X-ray crystallography (SCXRD), can be an extremely valuable tool to gain insight on sulfur σ-hole interactions, and how their rational exploitation can be enormously useful in the efficient removal of harmful organic molecules from aquatic ecosystems. Thus, we have used a MOF, prepared from the amino acid L-methionine and possessing channels decorated with -CH2 CH2 SCH3 thioalkyl chains, to remove a family of organic dyes at very low concentrations (10 ppm) from water. This MOF is able to efficiently capture the four dyes in a very fast manner, reaching within five minutes nearly the maximum removal. Remarkably, the crystal structure of the different organic dyes within MOFs channels could be determined by SCXRD. This has enabled us to directly visualize the important role sulfur σ-hole interactions play on the removal of organic dyes from aqueous solutions, representing one of the first studies on the rational exploitation of σ-hole interactions for water remediation.

Regulating the Tip Effect on Single-Atom and Cluster Catalysts: Forming Reversible Oxygen Species with High Efficiency in Chlorine Evolution Reaction

Chlorine evolution reaction has been applied in the production since a century ago. After times of evolution, it has been widely realized by the electrocatalytic process on anode nowadays. However, the anode applied in production contains a large amount of precious metal, increasing the cost. It is thus an opportunity to apply sub-nano catalysts in this field. By regulating the tip effect (TE) of the catalyst, it was discovered that the oxidized sub-nano iridium clusters supported by titanium carbide exhibit much higher efficiency than the single-atom one, which demonstrates the significance of modifying the electronic interaction. Moreover, it exhibits a ≈20 % decrease of the electricity, ≈98 % selectivity towards chlorine evolution reaction, and high durability of over 350 h. Therefore, this cluster catalyst performs great potential in applying in the practical production and the comprehension of the tip effect on different types of catalysts is also pushed to a higher level.

Simultaneous improvement to solubility and bioavailability of active natural compound isosteviol using cyclodextrin metal-organic frameworks

Cyclodextrin metal-organic framework (CD-MOF) as a highly porous supramolecular carrier could be one of the solutions to the insolubility of isosteviol (STV). The solubility of STV was lower than 20.00 ng/mL at pH 1.0 and pH 4.5, whilst its solubility increased to 20,074.30 ng/mL at pH 6.8 and 129.58 ng/mL in water with a significant pH-dependence. The in vitro release profiles of STV from STV@CD-MOF (0.5:1) were pH-independent in distinct pH media and closed to be thoroughly released but no such release profiles were observed for STV@CD-MOF (1:1) owing to nanoclusters formation. The bioavailability of STV@CD-MOF (1:1) in rats was 8.67-fold higher than that of STV, and was 1.32- and 1.27-fold higher than that of STV@CD and STV@CD-MOF (0.5:1). Our results indicated that the inclusion mechanism played a primary role when STV in CD-MOF was at a low loading ratio, while the increasement in bioavailability at a high loading ratio, which was attributed to the nanocluster mechanism. This was confirmed by molecular simulation. In conclusion, CD-MOF is a promising system for STV loading, overcoming the insolubility and to improve the bioavailability of this natural compound.

Hierarchical Zeolites-confined Metal Catalysts and Their Enhanced Catalytic Performances

The confinement of metal species within hierarchical zeolites combines the acidic/basic sites of zeolites, the enhanced mass transfer of mesoporous system, and the inside active metal sites, leading to high activity, unique selectivity, and superior stability in chemicals synthesis, energy and environment catalysis. To date, review on this emerging topic is rarely reported. Herein, we classify five metals-hierarchical zeolites composite (metal@hierarchical zeolites) according to the location of metals on hierarchical structure, including metals located on micropores, intercrystalline mesopores, intracrystalline mesopores, hollow nanobox and mesoporous shells. The synthesis and catalysis applications of metal@hierarchical zeolites composite are provided, highlighting the rational design of catalyst preparation, the improved catalytic efficiency and stability of metal species. Finally, we discuss the current limitations and future opportunities for this emerging field. This Review is expected to inspire more developments and applications of metal@hierarchical zeolites.

Metal Sub-nanoclusters Confined within Hierarchical Porous Carbons with High Oxidation Activity

Metal sub-nanoclusters (SNCs) have shown great promise for a variety of catalytic reactions. However, the fabrication of stable metal SNCs simultaneously with high dispersion and high metal contents remains a challenge. Herein, we report a novel and versatile strategy for the synthesis of various bimetal SNCs stabilized within hierarchical porous carbons (HPC). This facile synthesis only involves the self-assembly of a metal-organic framework (MOF) as the precursor, a molten salt assisted pyrolysis process and the final metal replacement. The metal SNCs (mostly less than 0.8 nm) derived from the metal nodes of the MOF are exclusively confined and homogeneously dispersed throughout the organic ligands derived HPC at high loadings (up to 11.2 wt %). The obtained Cu-Pd@HPC composite exhibits superior catalytic activity and recycling durability in the selective transformation of furfural to maleic acid, achieving 97.8 % yield of maleic acid with a TOF value as high as 20.1 h^-1 under mild conditions. DFT calculations reveal that the introduction of Pd shifts the partial density of states of Cu toward the Fermi level, leading to stronger chemisorption of furfural to enhance the catalytic activity.