Verringerung schädlicher Defekte für leistungsstarke Metallhalogenid‐Perowskit‐Solarzellen

Multifunctional Surface Treatment against Imperfections and Halide Segregation in Wide-Band Gap Perovskite Solar Cells

Mixed-halide wide-band gap perovskites (WBPs) still suffer from losses due to imperfections within the absorber and the segregation of halide ions under external stimuli. Herein, we design a multifunctional passivator (MFP) by mixing bromide salt, formamidinium bromide (FABr) with a p-type self-assembled monolayer (SAM) to target the nonradiative recombination pathways. Photoluminescence measurement shows considerable suppression of nonradiative recombination rates after treatment with FABr. However, WBPs still remained susceptible to halide segregation for which the addition of 25% p-type SAM was effective to decelerate segregation. It is observed that FABr can act as a passivating agent of the donor impurities, shifting the Fermi-level (Ef) toward the mid-band gap, while p-type SAM could cause an overweight of Ef toward the valence band. Favorable band bending at the interface could prevent the funneling of carriers toward I-rich clusters. Instead, charge carriers funnel toward an integrated SAM, preventing the accumulation of polaron-induced strain on the lattice. Consequently, n-i-p structured devices with an optimal MFP treatment show an average open-circuit voltage (VOC) increase of about 20 mV and fill factor (FF) increase by 4% compared with the control samples. The unencapsulated devices retained 95% of their initial performance when stored at room temperature under 40% relative humidity for 2800 h.

Unraveling the Role of Perovskite in Buried Interface Passivation

Interfaces in perovskite solar cells play a crucial role in their overall performance, and therefore, detailed fundamental studies are needed for a better understanding. In the case of the classical n-i-p architecture, TiO2 is one of the most used electron-selective layers and can induce chemical reactions that influence the performance of the overall device stack. The interfacial properties at the TiO2/perovskite interface are often neglected, owing to the difficulty in accessing this interface. Here, we use X-rays of variable energies to study the interface of (compact and mesoporous) TiO2/perovskite in such a n-i-p architecture. The X-ray photoelectron spectroscopy and X-ray absorption spectroscopy methods show that the defect states present in the TiO2 layer are passivated by a chemical interaction of the perovskite precursor solution during the formation of the perovskite layer and form an organic layer at the interface. Such passivation of intrinsic defects in TiO2 removes charge recombination centers and shifts the bands upward. Therefore, interface defect passivation by oxidation of Ti3+ states, the organic cation layer, and an upward band bending at the TiO2/perovskite interface explain the origin of an improved electron extraction and hole-blocking nature of TiO2 in the n-i-p perovskite solar cells.

Identifying the Interfacial Polarization in Non-stoichiometric Lead-Free Perovskites by Defect Engineering

Recent advances in perovskite ferroelectrics have fostered a host of exciting sensors and actuators. Defect engineering provides critical control of the performance of ferroelectric materials, especially lead-free ones. However, it remains a challenge to quantitatively study the concentration of defects due to the complexity of measurement techniques. Here, a feasible approach to analyzing the A-site defect and electron in alkali metal niobate is demonstrated. The theoretical relationships among defect concentration, conductivity, and oxygen partial pressure can be established based on the defect chemistry equilibria. The type and concentration of defects are reflected through the conductivity variation with oxygen partial pressure. As a result, the variation of defect concentration gives rise to defect-driven interfacial polarization, which further leads to distinct properties of the ceramics. e.g., abnormal dielectric behavior. Furthermore, this study also suggests a strategy to manipulate defects and charges in perovskite oxides for performance optimization.

Stabilizing Perovskite Precursor by Synergy of Functional Groups for NiOx -Based Inverted Solar Cells with 23.5 % Efficiency

Perovskite solar cells suffer from poor reproducibility due to the degradation of perovskite precursor solution. Herein, we report an effective precursor stabilization strategy via incorporating 3-hydrazinobenzoic acid (3-HBA) containing carboxyl (-COOH) and hydrazine (-NHNH₂ ) functional groups as stabilizer. The oxidation of I^- , deprotonation of organic cations and amine-cation reaction are the main causes of the degradation of mixed organic cation perovskite precursor solution. The -NHNH₂ can reduce I₂ defects back to I^- and thus suppress the oxidation of I^- , while the H⁺ generated by -COOH can inhibit the deprotonation of organic cations and subsequent amine-cation reaction. The above degradation reactions are simultaneously inhibited by the synergy of functional groups. The inverted device achieves an efficiency of 23.5 % (certified efficiency of 23.3 %) with an excellent operational stability, retaining 94 % of the initial efficiency after maximum power point tracking for 601 hours.

Ionic Liquid-Assisted Crystallization and Defect Passivation for Efficient Perovskite Solar Cells with Enhanced Open-Circuit Voltage

Perovskite materials have demonstrated many excellent properties in next-generation photovoltaic devices, but the intrinsic defects and the quality of perovskite film still limit the performance and stability of PSCs. Here, 1,3-dimethylimidazolium iodide (DMII) ionic liquid was employed as an additive to passivate the various defects and produce the high-quality perovskite film with enlarged grain sizes. DMII could act as an "ionic stabilizer" for passivating the point defects including the vacancies defects of organic cations and halogen anions of perovskite. At the same time, the extra problematic PbI₂ on surfaces and at grain boundaries of the perovskite film could also be reacted by DMII, leading to the reduction of recombination centers and trap states. On the other hand, the DMII ionic liquid with a "Ostwald ripening effect" could retard the crystallization process of perovskite crystals and yield better film quality with higher crystallinity, smoother morphology and larger grains. As a result, the optimal device achieved a champion power conversion efficiency (PCE) of 20.4 %. Particularly, the modified devices demonstrated a significant elevation in open-circuit voltage from 1.03 to 1.10 V. The hydrophobicity of perovskite films modified by DMII was enhanced and the un-encapsulated DMII devices retained 91 % of their initial PCE after aging 60 days under 15±5 % relative humidity.

Atomic Level Insights into Metal Halide Perovskite Materials by Scanning Tunneling Microscopy and Spectroscopy

Metal halide perovskite materials (MHPMs) have attracted significant attention because of their superior optoelectronic properties and versatile applications. The power conversion efficiency of MHPM solar cells (PSCs) has skyrocketed to 25.5 %. Although the performance of PSCs is already competitive, several important challenges still need to be solved to realize commercial applications. A thorough understanding of surface atomic structures and structure-property relationships is at the heart of these remaining issues. Scanning tunneling microscopy (STM) and spectroscopy (STS) can be used to characterize the surface properties of MHPMs, which can offer crucial insights into MHPMs at the atomic scale. This Review summarizes recent progress in STM and STS studies on MHPMs, with a focus on the surface properties. We provide understanding from the comparative perspective of several different MHPMs. We also highlight a series of novel phenomena observed by STM and STS. Finally, we outline a few research topics of primary importance for future studies.

Reducing Defects Density and Enhancing Hole Extraction for Efficient Perovskite Solar Cells Enabled by π-Pb2+ Interactions

Molecular doping is an of significance approach to reduce defects density of perovskite and to improve interfacial charge extraction in perovskite solar cells. Here, we show a new strategy for chemical doping of perovskite via an organic small molecule, which features a fused tricyclic core, showing strong intermolecular π-Pb²⁺ interactions with under-coordinated Pb²⁺ in perovskite. This π-Pb²⁺ interactions could reduce defects density of the perovskite and suppress the nonradiative recombination, which was also confirmed by the density functional theory calculations. In addition, this doping via π-Pb²⁺ interactions could deepen the surface potential and downshift the work function of the doped perovskite film, facilitating the hole extraction to hole transport layer. As a result, the doped device showed high efficiency of 21.41 % with ignorable hysteresis. This strategy of fused tricyclic core-based doping provides a new perspective for the design of new organic materials to improve the device performance.

Engineering the Bandgap and Surface Structure of CsPbCl3 Nanocrystals to Achieve Efficient Ultraviolet Luminescence

Herein, we report the design of novel ultraviolet luminescent CsPbCl₃ nanocrystals (NCs) with the emission peak at 381 nm through doping of cadmium ions. Subsequently, a surface passivation strategy with CdCl₂ is adopted to improve their photoluminescence quantum yield (PLQY) with the maximum value of 60.5 %, which is 67 times higher than that of the pristine counterparts. The PLQY of the surface passivated NCs remains over 50 % after one week while the pristine NCs show negligible emission. By virtue of density functional theory calculations, we reveal that the higher PLQY and better stability after surface passivation may result from the significant elimination of surface chloride vacancy (V_Cl ) defects. These findings provide fundamental insights into the optical manipulation of metal ion-doped CsPbCl₃ NCs.