Fluorescence Self‐Reporting Precipitation Polymerization Based on Aggregation‐Induced Emission for Constructing Optical Nanoagents

Multi-Functional Integration of Phosphor, Initiator, and Crosslinker for the Photo-Polymerization of Flexible Phosphorescent Polymer Gels

A general approach to constructing room temperature phosphorescence (RTP) materials involves the incorporation of a phosphorescent emitter into a rigid host or polymers with high glass transition temperature. However, these materials often suffer from poor processability and suboptimal mechanical properties, limiting their practical applications. In this work, we developed benzothiadiazole-based dialkene (BTD-HEA), a multifunctional phosphorescent emitter with a remarkable yield of intersystem crossing (ΦISC, 99.83 %). Its high triplet exciton generation ability and dialkene structure enable BTD-HEA to act as a photoinitiator and crosslinker, efficiently initiating the polymerization of various monomers within 120 seconds. A range of flexible phosphorescence gels, including hydrogels, organogels, ionogels, and aerogels were fabricated, which exhibit outstanding stretchability and recoverability. Furthermore, the unique fluorescent-phosphorescent colorimetric properties of the gels provide a more sensitive method for the visual determination of the polymerization process. Notably, the phosphorescent emission intensity of the hydrogel can be increased by the formation of ice, allowing for the precise detection of hydrogel freezing. The versatility of this emitter paves the way for fabricating various flexible phosphorescence gels with diverse morphologies using microfluidics, film-shearing, roll coating process, and two/three-dimensional printing, showcasing its potential applications in the fields of bioimaging and bioengineering.

Dansylated Nitrile N-Oxide as the Fluorescent Dye Clickable to Unsaturated Bonds without Catalyst

Fluorescent polymeric materials have been exploited in the fields of aesthetical purposes, biomedical engineering, and three-dimensional printing applications. While the fluorescent materials are prepared by the polymerization of fluorescent monomer or the blending a fluorescent dye with common polymer, the covalent immobilization of fluorescent dye onto common polymers is not the practical technique. In this paper, dansylated nitrile N-oxide (Dansyl-NO) has been designed and synthesized to be a stable nitrile N-oxide as the derivative of 2-hydroxy-1-naphthaldehyde. While Dansyl-NO shows good reactivity to an alkene and an alkyne to give fluorescent Dansyl-Ene and Dansyl-Yne, respectively, it hardly reacts to a nitrile. The results indicate that Dansyl-NO serves as a fluorescent dye clickable to alkenes and alkynes. To know the effects of solvent on the fluorescent properties, the UV-vis and fluorescence spectra of Dansyl-Ene are measured in three solvents. Dansyl-Ene shows fluorescent solvatochromism, which appears to be red-shifted along with the increase in solvent polarity. Poly(styrene-co-butadiene) directly reacts with Dansyl-NO to give fluorescent modified SB. The emission spectrum of modified SB is blue-shifted compared with that of Dansyl-Ene. The blue-shift could be possibly attributed to the presence of less polar polymer skeleton around the dansyl moieties of modified SB.

Quantification of Polymer Surface Degradation Using Fluorescence Spectroscopy

One solution to minimizing plastic pollution is to improve reuse and recycling strategies. Recycling, however, is limited by the overall degradation of plastics being used, and current techniques for monitoring this plastic degradation fail to observe this in its early stages, which is key for optimizing reusability. This research seeks to develop an inexpensive, reproducible, and nondestructive technique for monitoring degradation of polyethylene (PE) and polypropylene (PP) materials using Nile red as a fluorescent probe. Changes in Nile red's fluorescence spectra were observed upon exposure to stained, aged PE and PP samples. As the surface hydrophobicity of the plastic decreases, Nile red's fluorescence signal undergoes a corresponding signal shift to longer wavelengths (lower energy). The trends seen in the fluorescent profile were related to more commonly used measurements of plastic degradation, namely, the carbonyl index from infrared spectroscopy and bulk crystallinity from calorimetry. Results demonstrate clear trends in fluorescence spectra shifts as related to the chemical and physical changes to the plastics, with trends dependent on the polymer type but independent of polymer film thickness. The strength of this technique is divided into two defined fits of the fluorescence signal; one fit characterizes the degradation throughout the whole range of degradative oxidation and the other is tailored to provide insight into the early stages of degradation. Overall, this work establishes a characterization tool that assesses the extent of plastics' degradation, which may ultimately impact our ability to recover plastics and minimize plastic waste.

Controlling the Fluorescence Performance of AIE Polymers by Controlling the Polymer Microstructure

Aggregation-induced emission (AIE) polymers with expected emission wavelength/color and fluorescence efficiency are valuable in applications. However, most AIE polymers exhibit irregular emission wavelength/color changes compared to the original AIE monomers. Here, we report the synthesis of AIE polymers with unchanged emission wavelength by ring-opening (co)polymerizations of 4-(triphenylethenyl)phenoxymethyloxirane (TPEO) and other epoxides or phthalic anhydride. The chemical structures/physical properties of all (co)polymers were characterized by NMR, SEC, MALDI-TOF, and DSC. The co-polyether microstructures were revealed by calculating the reactivity ratios and visualized by Monte Carlo simulation. The photoluminescence quantum yields of all the (co)polymers were determined in the solid state. We systematically correlated the fluorescence performance with molecular weights, crystallinity, monomer compositions, glass transition temperatures, side lengths, and flexibility/rigidity.

Microfluidic-assisted synthesis and modeling of stimuli-responsive monodispersed chitosan microgels for drug delivery applications

Droplet microfluidic has been established to synthesize and functionalize micro/nanoparticles for drug delivery and screening, biosensing, cell/tissue engineering, lab-on-a-chip, and organ-on-a-chip have attracted much attention in chemical and biomedical engineering. Chitosan (CS) has been suggested for different biomedical applications due to its unique characteristics, such as antibacterial bioactivities, immune-enhancing influences, and anticancer bioactivities. The simulation results exhibited an alternative for attaining visions in this complex method. In this regard, the role of the flow rate ratio on the CS droplet features, including the generation rate and droplet size, were thoroughly described. Based on the results, an appropriate protocol was advanced for controlling the CS droplet properties for comparing their properties, such as the rate and size of the CS droplets in the microchip. Also, a level set (LS) laminar two-phase flow system was utilized to study the CS droplet-breaking process in the Flow Focused-based microchip. The outcomes demonstrated that different sizes and geometries of CS droplets could be established via varying the several parameters that validated addressing the different challenges for several purposes like drug delivery (the droplets with smaller sizes), tissue engineering, and cell encapsulation (the droplets with larger sizes), lab-on-a-chip, organ-on-a-chip, biosensing and bioimaging (the droplets with different sizes). An experimental study was added to confirm the simulation results. A drug delivery application was established to verify the claim.

Aggregation-Induced Emission Boosting the Study of Polymer Science

The past one hundred years witness the great development of polymer science. The advancement of polymer science is closely related with the developing of characterization techniques and methods, from viscometry in molecular weight determination to advanced techniques including differential scanning calorimetry, nuclear magnetic resonance and scanning electron microscopy. However, these techniques are normally constrained to tedious sample preparation, high cost, harsh experimental condition, or ex-situ characterization. Fluorescence technology has the merits of high sensitivity and direct visualization. Contrary to conventional aggregation-causing quenching fluorophores, those dyes with aggregation-induced emission characteristic show high emission efficiency in aggregate states. Based on the restriction of intramolecular motions for AIE properties, the AIE materials are very sensitive to the surrounding microenvironments owing to the twisted propeller-like structures and therefore reveal great potentials in polymer's study. The AIE concept has been successfully used in polymer's study and provides us a deeper understanding on polymer structure and properties. In this review, the applications of AIEgens in polymer science for visualizing polymerization, glass transition, dissolution, crystallization, gelation, self-assembly, phase separation, cracking and self-healing were exemplified and summarized. Lastly, the challenges and perspectives in the study of polymer science using AIEgens are addressed. This article is protected by copyright. All rights reserved.

Core-Shell Fluorescent Polymeric Particles with Tunable White Light Emission Based on Aggregation Microenvironment Manipulation

White-light emitting polymers (WLEPs) based on aggregation microenvironment-sensitive aggregation-induced emission (AIE) and Förster resonance energy transfer (FRET) have aroused great interest in lighting and optoelectronic devices. Herein, we developed a novel strategy to construct WLEP particles via a stepwise self-stabilized precipitation polymerization of two emission-complementary AIEgens under core-shell engineering, where the AIE characteristics and FRET process of core-shell fluorescent polymeric particles (CS-FPPs) could be modulated by altering aggregation microenvironment under swelling and shrinking of polymers, facilitating the tunable white light emission of CS-FPPs. Furthermore, such tuning could be fast realized in the solid state, thus demonstrating the potential in anti-counterfeiting. This work proved the significance of aggregation microenvironment on emission of luminogens, guiding the development of high-efficiency emission-tunable materials.

Prevent or Cure-The Unprecedented Need for Self-Reporting Materials

Self-reporting smart materials are highly relevant in modern soft matter materials science, as they allow for the autonomous detection of changes in synthetic polymers, materials, and composites. Despite critical advantages of such materials, for example, prolonged lifetime or prevention of disastrous material failures, they have gained much less attention than self-healing materials. However, as diagnosis is critical for any therapy, it is of the utmost importance to report the existence of system changes and their exact location to prevent them from spreading. Thus, we herein critically review the chemistry of self-reporting soft matter materials systems and highlight how current challenges and limitations may be overcome by successfully transferring self-reporting research concepts from the laboratory to the real world. Especially in the space of diagnostic self-reporting systems, the recent SARS-CoV-2 (COVID-19) pandemic indicates an urgent need for such concepts that may be able to detect the presence of viruses or bacteria on and within materials in a self-reporting fashion.