Dual Metal Active Sites in an Ir 1 /FeO x Single‐Atom Catalyst: A Redox Mechanism for the Water‐Gas Shift Reaction

Electrothermal Water-Gas Shift Reaction at Room Temperature with a Silicomolybdate-Based Palladium Single-Atom Catalyst

The water-gas shift (WGS) reaction is often conducted at elevated temperature and requires energy-intensive separation of hydrogen (H₂ ) from methane (CH₄ ), carbon dioxide (CO₂ ), and residual carbon monoxide (CO). Designing processes to decouple CO oxidation and H₂ production provides an alternative strategy to obtain high-purity H₂ streams. We report an electrothermal WGS process combining thermal oxidation of CO on a silicomolybdic acid (SMA)-supported Pd single-atom catalyst (Pd₁ /CsSMA) and electrocatalytic H₂ evolution. The two half-reactions are coupled through phosphomolybdic acid (PMA) as a redox mediator at a moderate anodic potential of 0.6 V (versus Ag/AgCl). Under optimized conditions, our catalyst exhibited a TOF of 1.2 s^-1 with turnover numbers above 40 000 mol CO 2 ${{_{{\rm CO}{_{2}}}}}$  mol_Pd ^-1 achieving stable H₂ production with a purity consistently exceeding 99.99 %.

Role of the Support Effects in Single-Atom Catalysts

In recent years, single-atom catalysts (SACs) have received a significant amount of attention due to their high atomic utilization, low cost, high reaction activity, and selectivity for multiple catalytic reactions. Unfortunately, the high surface free energy of single atoms leads them easily migrated and aggregated. Therefore, support materials play an important role in the preparation and catalytic performance of SACs. Aiming at understanding the relationship between support materials and the catalytic performance of SACs, the support effects in SACs are introduced and reviewed herein. Moreover, special emphasis is placed on exploring the influence of the type and structure of supports on SAC catalytic performance through advanced characterization and theoretical research. Future research directions for support materials are also proposed, providing some insight into the design of SACs with high efficiency and high loading.

Research Progress and Application of Single-Atom Catalysts: A Review

Due to excellent performance properties such as strong activity and high selectivity, single-atom catalysts have been widely used in various catalytic reactions. Exploring the application of single-atom catalysts and elucidating their reaction mechanism has become a hot area of research. This article first introduces the structure and characteristics of single-atom catalysts, and then reviews recent preparation methods, characterization techniques, and applications of single-atom catalysts, including their application potential in electrochemistry and photocatalytic reactions. Finally, application prospects and future development directions of single-atom catalysts are outlined.

Compressive Strain Modulation of Single Iron Sites on Helical Carbon Support Boosts Electrocatalytic Oxygen Reduction

Designing and modulating the local structure of metal sites is the key to gain the unique selectivity and high activity of single metal site catalysts. Herein, we report strain engineering of curved single atomic iron-nitrogen sites to boost electrocatalytic activity. First, a helical carbon structure with abundant high-curvature surface is realized by carbonization of helical polypyrrole that is templated from self-assembled chiral surfactants. The high-curvature surface introduces compressive strain on the supported Fe-N₄ sites. Consequently, the curved Fe-N₄ sites with 1.5 % compressed Fe-N bonds exhibit downshifted d-band center than the planar sites. Such a change can weaken the bonding strength between the oxygenated intermediates and metal sites, resulting a much smaller energy barrier for oxygen reduction. Catalytic tests further demonstrate that a kinetic current density of 7.922 mA cm^-2 at 0.9 V vs. RHE is obtained in alkaline media for curved Fe-N₄ sites, which is 31 times higher than that for planar ones. Our findings shed light on modulating the local three-dimensional structure of single metal sites and boosting the catalytic activity via strain engineering.

Tuning Ligand-Coordinated Single Metal Atoms on TiO2 and their Dynamic Response during Hydrogenation Catalysis

Ligand-coordinated supported catalysts (LCSCs) are of growing interest for heterogeneous single-atom catalysis. Here, the effect of the choice of organic ligand on the activity and stability of TiO₂ -supported single-atom Pt-ligand catalysts was investigated for ethylene hydrogenation. The activity of these catalysts showed a significant dependence on the choice of ligand and also correlated with coordination number for Pt-ligand and Pt-Cl^- . Of the three ligands examined in this study, the one with the lowest Pt coordination number, 1,10-phenanthroline-5,6-dione (PDO), showed the lowest reaction temperature and highest reaction rate, likely due to those metal sites being more accessible to reactant adsorption. In-situ X-ray absorption spectroscopy (XAS) experiments showed that the activity also correlated with good heterolytic dissociation of hydrogen, which was supported by OH/OD exchange experiments and was the rate-determining step of the hydrogenation reaction. In these in-situ XAS experiments up to 190 °C, the supported Pt-ligand catalyst showed excellent stability against structural and chemical change. Instead of Pt, the PDO ligand could be coordinated with Ir on TiO₂ to form Ir LCSCs that showed slow activation by loss of Ir-Cl bonds, then excellent stability in the hydrogenation of ethylene. These results provide the chance to engineer ligand-coordinated supported catalysts at the single-atom catalyst level by the choice of ligand and enable new applications at relatively high temperature.

Probing Single-Atom Catalysts and Catalytic Reaction Processes by Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy

Developing advanced characterization techniques for single-atom catalysts (SACs) is of great significance to identify their structural and catalytic properties. Raman spectroscopy can provide molecular structure information, and thus, the technique is a promising tool for catalysis. However, its application in SACs remains a great challenge because of its low sensitivity. We develop a highly sensitive strategy that achieves the characterization of the structure of SACs and in situ monitoring of the catalytic reaction processes on them by shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS) for the first time. Using the strategy, Pd SACs on different supports were identified by Raman spectroscopy and the nucleation process of Pd species from single atoms to nanoparticles was revealed. Moreover, the catalytic reaction processes of the hydrogenation of nitro compounds on Pd SACs were monitored in situ, and molecular insights were obtained to uncover the unique catalytic properties of SACs. This work provides a new spectroscopic tool for the in situ study of SACs, especially at solid-liquid interfaces.

Unravelling the Enigma of Nonoxidative Conversion of Methane on Iron Single-Atom Catalysts

The direct, nonoxidative conversion of methane on a silica-confined single-atom iron catalyst is a landmark discovery in catalysis, but the proposed gas-phase reaction mechanism is still open to discussion. Here, we report a surface reaction mechanism by computational modeling and simulations. The activation of methane occurs at the single iron site, whereas the dissociated methyl disfavors desorption into gas phase under the reactive conditions. In contrast, the dissociated methyl prefers transferring to adjacent carbon sites of the active center (Fe₁ ©SiC₂ ), followed by C-C coupling and hydrogen transfer to produce the main product (ethylene) via a key -CH-CH₂ intermediate. We find a quasi Mars-van Krevelen (quasi-MvK) surface reaction mechanism involving extracting and refilling the surface carbon atoms for the nonoxidative conversion of methane on Fe₁ ©SiO₂ and this surface process is identified to be more plausible than the alternative gas-phase reaction mechanism.

Controlling the Oxidation State of Pt Single Atoms for Maximizing Catalytic Activity

Single-atom catalysts (SACs) have emerged as promising materials in heterogeneous catalysis. Previous studies reported controversial results about the relative level in activity for SACs and nanoparticles (NPs). These works have focused on the effect of metal atom arrangement, without considering the oxidation state of the SACs. Here, we immobilized Pt single atoms on defective ceria and controlled the oxidation state of Pt SACs, from highly oxidized (Pt⁰ : 16.6 at %) to highly metallic states (Pt⁰ : 83.8 at %). The Pt SACs with controlled oxidation states were then employed for oxidation of CO, CH₄ , or NO, and their activities compared with those of Pt NPs. The highly oxidized Pt SACs presented poorer activities than Pt NPs, whereas metallic Pt SACs showed higher activities. The Pt SAC reduced at 300 °C showed the highest activity for all the oxidations. The Pt SACs with controlled oxidation states revealed a crucial missing link between activity and SACs.