Electrocatalytically Active Fe‐(O‐C 2 ) 4 Single‐Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Boosting Electroreduction Kinetics of Nitrogen to Ammonia via Atomically Dispersed Sn Protuberance

Atomically dispersed metal catalysts show potential advantages in N₂ reduction reaction (NRR) due to their excellent activity and efficient metal utilization. Unfortunately, the reported catalysts usually exhibit unsatisfactory NRR activity due to their poor N₂ adsorption and activation. Herein, we report a novel Sn atomically dispersed protuberance (ADP) by coordination with substrate C and O to induce positive charge accumulation on Sn site for improving its N₂ adsorption, activation and NRR performance. The extended X-ray absorption fine structure (EXAFS) spectra confirmed the local coordination structure of the Sn ADPs. NRR activity was significantly promoted via Sn ADPs, exhibiting a remarkable NH₃ yield (R_NH3 ) of 28.3 μg h^-1  mg_cat ^-1 (7447 μg h^-1  mg_Sn ^-1 ) at -0.3 V. Furthermore, the enhanced N₂ H_x intermediates was verified by in situ experiments, yielding consistent results with DFT calculation. This work opens a new avenue to regulate the activity and selectivity of N₂ fixation.

Single-Step Synthesis of Fe-Fe3 O4 Catalyst for Highly Efficient and Selective Electrochemical Nitrogen Reduction

Nitrogen reduction electrocatalysts are highly attractive for catalytic science. However, most electrocatalysts are limited by their low faradaic efficiency, poor ammonia yield, and tedious and costly catalyst synthesis process. In this work, Fe-based oxide composite nanoparticles with steady chemical states are prepared by a single-step green procedure under ambient conditions. The resulting Fe-Fe₃ O₄ demonstrates remarkable activity and selectivity for nitrogen reduction reaction (NRR) with the highest faradaic efficiency of 53.2±1.8 % and NH₃ yield rate of 24.6±0.8 μg h^-1  mg_cat. ^-1 at -0.4 V (vs. RHE) in 0.1 m Na₂ SO₄ electrolyte. Characterization experiments and theoretical calculation reveal that Fe-Fe₃ O₄ exhibits significantly enhanced charge transfer capability and suppresses the competitive HER process.

Lattice-Confined Single-Atom Fe1 Sx on Mesoporous TiO2 for Boosting Ambient Electrocatalytic N2 Reduction Reaction

Mimicking natural nitrogenase to create highly efficient single-atom catalysts (SACs) for ambient N₂ fixation is highly desired, but still challenging. Herein, S-coordinated Fe SACs on mesoporous TiO₂ have been constructed by a lattice-confined strategy. The extended X-ray absorption fine structure and X-ray photoelectron spectroscopy spectra demonstrate that Fe atoms are anchored in TiO₂ lattice via the FeS₂ O₂ coordination configuration. Theoretical calculations reveal that FeS₂ O₂ sites are the active centers for electrocatalytic nitrogen reduction reaction (NRR). Moreover, the finite element analysis shows that confinement of opened and ordered mesopores can facilitate the mass transport and offer an enlarged active surface area for NRR. As a result, this catalyst delivers a favorable NH₃ yield rate of 18.3 μg h^-1  mg_cat. ^-1 with a high Faradaic efficiency of 17.3 % at -0.20 V versus a reversible hydrogen electrode. Most importantly, this lattice-confined strategy is universal and can also be applied to Ni₁ S_x @TiO₂ , Co₁ S_x @TiO₂ , Mo₁ S_x @TiO₂ , and Cu₁ S_x @TiO₂ SACs. Our study provides new hints for the design and biomimetic synthesis of highly efficient NRR electrocatalysts.

Atomic Tuning of Single-Atom Fe-N-C Catalysts with Phosphorus for Robust Electrochemical CO2 Reduction

The electrochemical reduction of CO₂ to produce carbon-based fuels and chemicals possesses huge potentials to alleviate current environmental problems. However, it is confronted by great challenges in the design of active electrocatalysts with low overpotentials and high product selectivity. Here we report the atomic tuning of a single-Fe-atom catalyst with phosphorus (Fe-N/P-C) on commercial carbon black as a robust electrocatalyst for CO₂ reduction. The Fe-N/P-C catalyst exhibits impressive performance in the electrochemical reduction of CO₂ to CO, with a high Faradaic efficiency of 98% and a high mass-normalized turnover frequency of 508.8 h^-1 at a low overpotential of 0.34 V. On the basis of ex-situ X-ray absorption spectroscopy measurements and DFT calculations, we reveal that the tuning of P in single-Fe-atom catalysts reduces the oxidation state of the Fe center and decreases the free-energy barrier of *CO intermediate formation, consequently maintaining the electrocatalytic activity and stability of single-Fe-atom catalysts.

CO2 Capture, Separation and Reduction on Boron-Doped MoS2 , MoSe2 and Heterostructures with Different Doping Densities: A Theoretical Study

Designing high-performance materials for CO₂ capture and conversion is of great significance to reduce the greenhouse effect and alleviate the energy crisis. The strategy of doping is widely used to improve activity and selectivity of the materials. However, it is unclear how the doping densities influence the materials' properties. Herein, we investigated the mechanism of CO₂ capture, separation and conversion on MoS₂ , MoSe₂ and Janus MoSSe monolayers with different boron doping levels using density functional theory (DFT) simulations. The results indicate that CO₂ , H₂ and CH₄ bind weakly to the monolayers without and with single-atom boron doping, rendering these materials unsuitable for CO₂ capture from gas mixtures. In contrast, CO₂ binds strongly to monolayers doped with diatomic boron, whereas H₂ and CH₄ can only form weak interactions with these surfaces. Thus, the monolayers doped with diatomic boron can efficiently capture and separate CO₂ from such gas mixtures. The electronic structure analysis demonstrates that monolayers doped with diatomic doped are more prone to donating electrons to CO₂ than those with single-atom boron doped, leading to activation of CO₂ . The results further indicate that CO₂ can be converted to CH₄ on diatomic boron doped catalysts, and MoSSe is the most efficient of the surfaces studied for CO₂ capture, separation and conversion. In summary, the study provides evidence for the doping density is vital to design materials with particular functions.

Emerging Materials and Methods toward Ammonia-Based Energy Storage and Conversion

Efficient storage and conversion of renewable energies is of critical importance to the sustainable growth of human society. With its distinguishing features of high hydrogen content, high energy density, facile storage/transportation, and zero-carbon emission, ammonia has been recently considered as a promising energy carrier for long-term and large-scale energy storage. Under this scenario, the synthesis, storage, and utilization of ammonia are key components for the implementation of ammonia-mediated energy system. Being different from fossil fuels, renewable energies normally have intermittent and variable nature, and thus pose demands on the improvement of existing technologies and simultaneously the development of alternative methods and materials for ammonia synthesis and storage. The energy release from ammonia in an efficient manner, on the other hand, is vital to achieve a sustainable energy supply and complete the nitrogen circle. Herein, recent advances in the thermal-, electro-, plasma-, and photocatalytic ammonia synthesis, ammonia storage or separation, ammonia thermal/electrochemical decomposition and conversion are summarized with the emphasis on the latest developments of new methods and materials (catalysts, electrodes, and sorbents) for these processes. The challenges and potential solutions are discussed.

Recent Advances and Perspective on Electrochemical Ammonia Synthesis under Ambient Conditions

Ammonia is an essential chemical for agriculture and industry. To date, NH₃ is mainly supplied by the traditional Haber-Bosch process, which is operated under high-temperature and high-pressure in a centralized way. To achieve ammonia production in an environmentally benign way, electrochemical NH₃ synthesis under ambient conditions has become the frontier of energy and chemical conversion schemes, as it can be powered by renewable energy and operates in a decentralized way. The recent progress on developing different strategies for NH₃ production, including 1) classic NH₃ synthesis pathways over nanomaterials; 2) the Mars-van Krevelen (MvK) mechanism over metal nitrides (MN_x ); 3) reducing the nitrate into NH₃ over Cu-based nanomaterial; and 4) metal-N₂ battery release of NH₃ from Li_x M. Moreover, the most recent advances in engineering strategies for developing highly active materials and the design of the reaction systems for NH₃ synthesis are covered.

Engineering Oversaturated Fe-N5 Multifunctional Catalytic Sites for Durable Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are regarded as a promising next-generation system for advanced energy storage owing to a high theoretical energy density of 2600 Wh kg^-1 . However, the practical implementation of Li-S batteries has been thwarted by the detrimental shuttling behavior of polysulfides, and the sluggish kinetics in electrochemical processes. Herein, a novel single atom (SA) catalyst with oversaturated Fe-N₅ coordination structure (Fe-N₅ -C) is precisely synthesized by an absorption-pyrolysis strategy and introduced as an effective sulfur host material. The experimental characterizations and theoretical calculations reveal synergism between atomically dispersed Fe-N₅ active sites and the unique carbon support. The results exhibit that the sulfur composite cathode built on the Fe-N₅ -C can not only adsorb polysulfides via chemical interaction, but also boost the redox reaction kinetics, thus mitigating the shuttle effect. Meanwhile, the robust three-dimensional nitrogen doped carbon nanofiber with large surface area, and high porosity enables strong physical confinement and fast electron/ion transfer process. Attributed to such unique features, Li-S batteries with S/Fe-N₅ -C composite cathode realize outstanding cyclability and rate capability, as well as high areal capacities under raised sulfur loading, which demonstrates great potential in developing advanced Li-S batteries.

Facet-controlled palladium nanocrystalline for enhanced nitrate reduction towards ammonia

Electrochemical nitrate reduction reaction (NO₃^-RR) is considered an appealing way for producing ammonia (NH₃) under ambient conditions and solving environmental problems caused by nitrate, whereas the lack of adequate catalysts hampers the development of NO₃^-RR. Here, we firstly demonstrate that the Pd nanocrystalline with a well-desired facet can act as a highly efficient NO₃^-RR electrocatalyst for ambient ammonia synthesis. Pd (1 1 1) exhibits excellent activity and selectivity in reducing NO₃^- to NH₄⁺ with a Faradaic efficiency of 79.91% and an NH₄⁺ production of 0.5485 mmol h^-1 cm^-2 (2.74 mmol h^-1 mg^-1) in 0.1 M Na₂SO₄ (containing 0.1 M NO₃^-), which is 1.4 times higher than Pd (1 0 0) and 1.9 times higher than Pd (1 1 0), respectively. Density functional theory (DFT) calculation reveals that the superior NO₃^-RR activity of Pd (1 1 1) originates from its optimized activity of NO₃^- adsorption, smaller free energy change of the rate-limiting step (*NH₃ to NH₃), and poorer hydrogen evolution reaction activity (HER, competitive reaction). This work not only highlights the potentials of Pd-based nanocatalysts for NO₃^-RR but also provides new insight for the applications in NO₃^-RR of other facet-orientation nanomaterials.

Coexisting Single-Atomic Fe and Ni Sites on Hierarchically Ordered Porous Carbon as a Highly Efficient ORR Electrocatalyst

The development of oxygen reduction reaction (ORR) electrocatalysts based on earth-abundant nonprecious materials is critically important for sustainable large-scale applications of fuel cells and metal-air batteries. Herein, a hetero-single-atom (h-SA) ORR electrocatalyst is presented, which has atomically dispersed Fe and Ni coanchored to a microsized nitrogen-doped graphitic carbon support with unique trimodal-porous structure configured by highly ordered macropores interconnected through mesopores. Extended X-ray absorption fine structure spectra confirm that Fe- and Ni-SAs are affixed to the carbon support via FeN₄ and NiN₄ coordination bonds. The resultant Fe/Ni h-SA electrocatalyst exhibits an outstanding ORR activity, outperforming SA electrocatalysts with only Fe- or Ni-SAs, and the benchmark Pt/C. The obtained experimental results indicate that the achieved outstanding ORR performance results from the synergetic enhancement induced by the coexisting FeN₄ and NiN₄ sites, and the superior mass-transfer capability promoted by the trimodal-porous-structured carbon support.