Doping and defects in carbon nitride cause efficient in situ H2O2 synthesis to allow efficient photocatalytic sterilization

In situ photocatalytic synthesis of H2O2 for disinfection has attracted widespread attention because it is a clean and environmentally friendly sterilization method. Graphitic carbon nitride has been used as a very selective photocatalyst for H2O2 generation but has some limitations (e.g., insufficient light absorption, rapid electron-hole recombination, and slow direct two-electron reduction processes) that prevent efficient H2O2 production. In this study, potassium-doped graphite carbon nitride with nitrogen vacancies (NDKCN) was prepared using a simple method involving a thermal fusion salt and N2 calcination, which possessed an ultrathin nanosheet structure (1.265 nm) providing abundant active sites. Synergistic effects caused by nitrogen vacancies and K+ and I- doping in the NDKCN photocatalyst gave the NDKCN a good ability to absorb light, undergo fast charge transfer, and give a high photoelectric current response. The optimized photocatalytic H2O2 yield of the NDKCN was 780.1 μM·g-1·min-1, which was 10 times the yield of the pristine g-C3N4. Tests involving quenching reactive species, electron spin resonance, and rotating disk electrodes indicated that one-step two-electron direct reduction on the NDKCN caused excellent H2O2 generation performance. The ability to efficiently generate H2O2 in situ gave NDKCN an excellent bactericidal performance, and 7.3 log10 (colony-forming units·mL-1) of Escherichia coli were completely eliminated within 80 min. Scanning electron microscopy images before and after sterilization indicated the changes in bacteria caused by the catalytic activity. The new g-C3N4-based photocatalyst and similar rationally designed photocatalysts with doping and defects offer efficient and simple in situ H2O2 sterilization.

Modulate the Strong Exciton Effect by Na+ Coordination-Induced Trap States: Efficient Photocatalytic H2O2 Production

Due to the strong Coulomb interaction, in most polymer photocatalysts, electron-hole pairs exist in the form of excitons rather than free charge carriers. The giant excitonic effect is a key obstacle to generating free charge carriers. Therefore, effectively regulating the exciton effect is the first step to achieving optimized carrier separation. Here, we used C-ring/g-C3N4 as the prototypical model system to design a photocatalyst with a Na-coordination-induced trap state. We demonstrate that the excitons can be effectively dissociated into charge carriers by combining with the trap state formed by Na doping sites. Encouragingly, signals from the dissociation of excitons into carriers were observed by ultrafast transient spectroscopy. Benefiting from the enhanced exciton dissociation, Na-C/CN displayed a H2O2 production rate of 17.4 mmol·L-1·h-1 with an apparent quantum efficiency up to 26.9% at 380 nm, which is much higher than many other g-C3N4-based photocatalysts. This work explains the effect of cation doping on the exciton-carrier behavior in polymers. Also, it provides a new way to regulate the exciton effect.

Organic Molecule Bifunctionalized Polymeric Carbon Nitride for Enhanced Photocatalytic Hydrogen Peroxide Production

Modifying the polymeric carbon nitride (CN) with organic molecules is a promising strategy to enhance the photocatalytic activity. However, most previously reported works show that interchain embedding and edge grafting of the organic molecule can hardly be achieved simultaneously. Herein, we successfully synthesized organic molecule bifunctionalized CN (MBCN) through copolymerization of melon and sulfanilamide at a purposely elevated temperature of 550 °C. In MBCN, the edge grafted and interchain embedded benzene rings act as the electron-donating group and charge-transfer channel, respectively, rendering efficient photocatalytic H2 O2 production. The optimal MBCN exhibits a significantly improved non-sacrificial photocatalytic H2 O2 generation rate (54.0 μmol g-1  h-1 ) from pure water, which is 10.4 times that of pristine CN. Experimental and density functional theory (DFT) calculation results reveal that the enhanced H2 O2 production activity of MBCN is mainly attributed to the improved photogenerated charge separation/transfer and decreased formation energy barrier (▵G) from O2- to the intermediate 1,4-endoperoxide (⋅OOH). This work suggests that simultaneous formation of electron donating group and charge transfer channel via organic molecule bifunctionalization is a feasible strategy for boosting the photocatalytic activity of CN.

K-N Bridge-Mediated charge separation in hollow g-C3N4 Frameworks: A bifunctional photocatalysts towards efficient H2 and H2O2 production

The development of bifunctional photocatalysts for enhancing hydrogen (H2) and hydrogen peroxide (H2O2) production from water is essential in addressing environmental and energy issues. However, the practical implementation of photocatalytic technology is still constrained by the inadequate separation of photo-generated charge carriers. Herein, potassium (K) atoms are introduced into the interlayers of graphitic carbon nitride (g-C3N4) with a hollow hexagonal structure (K-TCN) and are coordinated with N atoms in adjacent layers. The presence of K-N coordination serves as a layer bridge, facilitating the separation of charge carriers. The hollow hexagonal structure reduces the distance over which photogenerated electrons migrate to the surface, thereby enhancing the reaction kinetics. Consequently, the optimized K-TCN exhibits a dramatically improved photocatalytic H2 (941.6 μmol g-1h-1 with platinum (Pt) as the cocatalyst) and H2O2 (347.6 μmol g-1h-1) generation as compared to hollow g-C3N4 (TCN) and bulk g-C3N4 nanosheet (CN) without K-N bridge under visible light irradiation. The unique design holds promising potential for developing highly efficient bifunctional photocatalysts towards producing renewable fuels and value-added chemicals.

Leveraging Interlayer Interaction in M-N-C Catalysts for Enhanced Activity in Oxygen Reduction Reactions

Atomically dispersed metal-nitrogen-carbon (M-N-C) materials are deemed promising catalysts for the oxygen reduction reaction (ORR) in fuel cells. Yet the multilayer nature of M-N-C has been largely neglected in computational analysis. To bridge the gap, we conducted a first-principles investigation using bilayer M-N-C models (TMNx/G-TMNy/G, TM = Mn, Fe, Co, Ni, Cu, G = graphene, x, y = 3 or 4), where the TMs on the top serves as the active center. While in-plane TMN4 at the bottom has a minimal impact on the ORR, out-of-plane TMN3 substantially influences the adsorption free energy of OH through a strong interlayer bonding interaction. By leveraging interlayer interactions, we appreciably lowered the overpotential of selected TMN4 (TM = Co, Ni, Cu) and achieved a minimum of 0.40 V on CoN4/G-CuN3/G. Constant potential calculations revealed weak dependence of OH binding energy on external voltage and obtained results comparable to constant charge calculation. This study provided new physical insight into modulating naturally occurring multilayer M-N-C catalysts.

Developing Ni single-atom sites in carbon nitride for efficient photocatalytic H2O2 production

Photocatalytic two-electron oxygen reduction to produce high-value hydrogen peroxide (H2O2) is gaining popularity as a promising avenue of research. However, structural evolution mechanisms of catalytically active sites in the entire photosynthetic H2O2 system remains unclear and seriously hinders the development of highly-active and stable H2O2 photocatalysts. Herein, we report a high-loading Ni single-atom photocatalyst for efficient H2O2 synthesis in pure water, achieving an apparent quantum yield of 10.9% at 420 nm and a solar-to-chemical conversion efficiency of 0.82%. Importantly, using in situ synchrotron X-ray absorption spectroscopy and Raman spectroscopy we directly observe that initial Ni-N3 sites dynamically transform into high-valent O1-Ni-N2 sites after O2 adsorption and further evolve to form a key *OOH intermediate before finally forming HOO-Ni-N2. Theoretical calculations and experiments further reveal that the evolution of the active sites structure reduces the formation energy barrier of *OOH and suppresses the O=O bond dissociation, leading to improved H2O2 production activity and selectivity.

Recent Advances in Carbon Nitride-Based S-scheme Photocatalysts for Solar Energy Conversion

Energy shortages are a major challenge to the sustainable development of human society, and photocatalytic solar energy conversion is a potential way to alleviate energy problems. As a two-dimensional organic polymer semiconductor, carbon nitride is considered to be the most promising photocatalyst due to its stable properties, low cost, and suitable band structure. Unfortunately, pristine carbon nitride has low spectral utilization, easy recombination of electron holes, and insufficient hole oxidation ability. The S-scheme strategy has developed in recent years, providing a new perspective for effectively solving the above problems of carbon nitride. Therefore, this review summarizes the latest progress in enhancing the photocatalytic performance of carbon nitride via the S-scheme strategy, including the design principles, preparation methods, characterization techniques, and photocatalytic mechanisms of the carbon nitride-based S-scheme photocatalyst. In addition, the latest research progress of the S-scheme strategy based on carbon nitride in photocatalytic H₂ evolution and CO₂ reduction is also reviewed. Finally, some concluding remarks and perspectives on the challenges and opportunities for exploring advanced nitride-based S-scheme photocatalysts are presented. This review brings the research of carbon nitride-based S-scheme strategy to the forefront and is expected to guide the development of the next-generation carbon nitride-based S-scheme photocatalysts for efficient energy conversion.

Designing Single-Atom Active Sites on sp2 -Carbon Linked Covalent Organic Frameworks to Induce Bacterial Ferroptosis-Like for Robust Anti-Infection Therapy

With the threat posed by drug-resistant pathogenic bacteria, developing non-antibiotic strategies for eradicating clinically prevalent superbugs remains challenging. Ferroptosis is a newly discovered form of regulated cell death that can overcome drug resistance. Emerging evidence shows the potential of triggering ferroptosis-like for antibacterial therapy, but the direct delivery of iron species is inefficient and may cause detrimental effects. Herein, an effective strategy to induce bacterial nonferrous ferroptosis-like by coordinating single-atom metal sites (e.g., Ir and Ru) into the sp² -carbon-linked covalent organic framework (sp² c-COF-Ir-ppy₂ and sp² c-COF-Ru-bpy₂ ) is reported. Upon activating by light irradiation or hydrogen peroxide, the as-constructed Ir and Ru single-atom catalysts (SACs) can significantly expedite intracellular reactive oxygen species burst, enhance glutathione depletion-related glutathione peroxidase 4 deactivation, and disturb the nitrogen and respiratory metabolisms, leading to lipid peroxidation-driven ferroptotic damage. Both SAC inducers show potent antibacterial activity against Gram-positive bacteria, Gram-negative bacteria, clinically isolated methicillin-resistant Staphylococcus aureus (MRSA), and biofilms, as well as excellent biocompatibility and strong therapeutic and preventive potential in MRSA-infected wounds and abscesses. This delicate nonferrous ferroptosis-like strategy may open up new insights into the therapy of drug-resistant pathogen infection.

Photothermal-enabled single-atom catalysts for high-efficiency hydrogen peroxide photosynthesis from natural seawater

Hydrogen peroxide (H₂O₂) is a powerful industrial oxidant and potential carbon-neutral liquid energy carrier. Sunlight-driven synthesis of H₂O₂ from the most earth-abundant O₂ and seawater is highly desirable. However, the solar-to-chemical efficiency of H₂O₂ synthesis in particulate photocatalysis systems is low. Here, we present a cooperative sunlight-driven photothermal-photocatalytic system based on cobalt single-atom supported on sulfur doped graphitic carbon nitride/reduced graphene oxide heterostructure (Co-CN@G) to boost H₂O₂ photosynthesis from natural seawater. By virtue of the photothermal effect and synergy between Co single atoms and the heterostructure, Co-CN@G enables a solar-to-chemical efficiency of more than 0.7% under simulated sunlight irradiation. Theoretical calculations verify that the single atoms combined with heterostructure significantly promote the charge separation, facilitate O₂ absorption and reduce the energy barriers for O₂ reduction and water oxidation, eventually boosting H₂O₂ photoproduction. The single-atom photothermal-photocatalytic materials may provide possibility of large-scale H₂O₂ production from inexhaustible seawater in a sustainable way.

Solar-to-H2 O2 Energy Conversion by the Photothermal Effect of a Polymeric Photocatalyst via a Two-Channel Pathway

With a view to using solar energy, the exploitation of near-infrared (NIR) light, which constitutes about 50 % of solar energy, in photocatalytic H₂ O₂ synthesis remains challenging. In this study, resorcinol-formaldehyde (RF), which has a relatively low bandgap and high conductivity, is introduced for photothermal catalytic generation of H₂ O₂ under ambient conditions. Owing to the promoted surface charge transfer rate under high temperature, the photosynthetic yield reaches roughly 2000 μm within 40 min under 400 mW cm^-2 irradiation with a solar-to-chemical conversion (SCC) efficiency of up to 0.19 % at 338 K under ambient conditions, exceeding the rate of photocatalysis with a cooling system by a factor of about 2.5. Notably, the H₂ O₂ produced by RF during photothermal process was formed via a two-channel pathway, leading to the overall promotion of H₂ O₂ formation. The resultant H₂ O₂ can be applied in situ for pollutant removal. This work offers a sustainable and economical route for the efficient formation of H₂ O₂ .

Hexagonal-borocarbonitride (h-BCN) based heterostructure photocatalyst for energy and environmental applications: A review

Formulation of heterojunction with remarkable high efficiency by utilizing solar light is promising to synchronously overcome energy and environmental crises. In this concern, hexagonal-borocarbonitride (h-BCN) based Z-schemes have proved potential candidates due to their spatially separated oxidation and reduction sites, robust light-harvesting ability, high charge pair migration and separation, and strong redox ability. H-BCN has emerged as a hotspot in the research field as a metal-free photocatalyst with a tunable bandgap range of 0-5.5 eV. The BCN photocatalyst displayed synergistic benefits of both graphene and boron nitride. Herein, the review demonstrates the current state-of-the-art in the Z-scheme photocatalytic application with a special emphasis on the predominant features of their photoactivity. Initially, fundamental aspects and various synthesis techniques are discussed, including thermal polymerization, template-assisted, and template-free methods. Afterward, the reaction mechanism of direct Z-scheme photocatalysts and indirect Z-scheme (all-solid-state) are highlighted. Moreover, the emerging Step-scheme (S-scheme) systems are briefly deliberated to understand the charge transfer pathway mechanism with an induced internal electric field. This review critically aims to comprehensively summarize the photo-redox applications of various h-BCN-based heterojunction photocatalysts including CO₂ photoreduction, H₂ evolution, and pollutants degradation. Finally, some challenges and future direction of h-BCN-based Z-scheme photocatalyst in environmental remediation are also proposed.

Understanding Aerobic Nitrogen Photooxidation on Titania through In Situ Time-Resolved Spectroscopy

Nitrate is an important raw material for chemical fertilizers, but it is industrially manufactured in multiple steps at high temperature and pressure, urgently motivating the design of a green and sustainable strategy for nitrate production. We report the photosynthesis of nitrate from N₂ and O₂ on commercial TiO₂ in a flow reactor under ambient conditions. The TiO₂ photocatalyst offered a high nitrate yield of 1.85 μmol h^-1 as well as a solar-to-nitrate energy conversion efficiency up to 0.13 %. We combined reactivity and in situ Fourier transform infrared spectroscopy to elucidate the mechanism of nitrate formation and unveil the special role of O₂ in N≡N bond dissociation. The mechanistic insight into charge-involved N₂ oxidation was further demonstrated by in situ transient absorption spectroscopy and electron paramagnetic resonance. This work exhibits the mechanistic origin of N₂ photooxidation and initiates a potential method for triggering inert catalytic reactions.

Highly efficient photocatalytic H2O2 generation over dysprosium oxide-integrated g-C3N4 nanosheets with nitrogen deficiency

The increasing global crisis considers energy as the fundamental cause to conduct extensive research work to find clean alternative methods with high capabilities such as H₂O₂ synthesis. Photocatalytic H₂O₂ production can tackle this growing issue by maintaining environmental remediation. In this work, dysprosium oxide (Dy-oxide)-integrated g-C₃N₄ has been synthesized and characterized with XRD, SEM, TEM, XPS, EPR, DRS, PL, and electrochemical analyses. Simulated solar light irradiation implemented photocatalytic H₂O₂ production using the as-prepared catalysts. The facile preparation technique in the Ar atmosphere raises more N deficiency in the g-C₃N₄ matrix. N-deficient g-C₃N₄ nanosheets with an exceptionally high photocatalytic performance can be further enhanced by integrating well-dispersed Dysprosium oxide (Dy₂O₃) particles onto g-C₃N₄. This study reports bandgap narrowing and various surface defects on g-C₃N₄ with trace amounts of Dy₂O₃. Undoped g-C₃N₄ (Dy0) yielded 20.27 mM⋅g^-1⋅h^-1, while the optimized photocatalyst Dy15 showed high performance of H₂O₂ production up to 48.36 mM⋅g^-1⋅h^-1. It is approximately 2.4 times higher than the pristine g-C₃N₄. Dy15 proves the positive impact of Dy-oxide on enhancing the N-deficient g-C₃N₄ performance towards photocatalytic H₂O₂ production. This work highlights the oxygen reduction reaction (ORR) through a mixed pathway of well-known two-step one-electron and one-step two-electron processes in H₂O₂ generation.

Phosphorus Tailors the d-Band Center of Copper Atomic Sites for Efficient CO2 Photoreduction under Visible-Light Irradiation

Photoreduction of CO₂ into solar fuels has received great interest, but suffers from low catalytic efficiency and poor selectivity. Herein, two single-Cu-atom catalysts with unique Cu configurations in phosphorus-doped carbon nitride (PCN), namely, Cu₁ N₃ @PCN and Cu₁ P₃ @PCN were fabricated via selective phosphidation, and tested in visible light-driven CO₂ reduction by H₂ O without sacrificial agents. Cu₁ N₃ @PCN was exclusively active for CO production with a rate of 49.8 μmol_CO  g_cat ^-1  h^-1 , outperforming most polymeric carbon nitride (C₃ N₄ ) based catalysts, while Cu₁ P₃ @PCN preferably yielded H₂ . Experimental and theoretical analysis suggested that doping P in C₃ N₄ by replacing a corner C atom upshifted the d-band center of Cu in Cu₁ N₃ @PCN close to the Fermi level, which boosted the adsorption and activation of CO₂ on Cu₁ N₃ , making Cu₁ N₃ @PCN efficiently convert CO₂ to CO. In contrast, Cu₁ P₃ @PCN with a much lower Cu 3d electron energy exhibited negligible CO₂ adsorption, thereby preferring H₂ formation via photocatalytic H₂ O splitting.

Oxygen Vacancy-Mediated Z-Scheme Charge Transfer in a 2D/1D B-Doped g-C3N4/rGO/TiO2 Heterojunction Visible Light-Driven Photocatalyst for Simultaneous/Efficient Oxygen Reduction Reaction and Alcohol Oxidation

Hydrogen peroxide (H₂O₂) is a powerful oxidant that directly or indirectly oxidizes many organic and inorganic contaminants. The photocatalytic generation of H₂O₂ is achieved by using a semiconductor photocatalyst in the presence of alcohol as a proton source. Herein, we have synthesized oxygen vacancy (O_v)-mediated TiO₂/B-doped g-C₃N₄/rGO (TBCN@rGO) ternary heterostructures by a simple hydrothermal technique. Several characterization techniques were employed to explore the existence of oxygen vacancies in the crystal structure and investigate their impact on the optoelectronic properties of the catalyst. Oxygen vacancies offered additional sites for adsorbing molecular oxygen, activating alcohols, and facilitating electron migration from TBCN@rGO to the surface-adsorbed O₂. The defect creation (oxygen vacancy) and Z-scheme mechanistic pathways create a suitable platform for generating H₂O₂ by two-electron reduction processes. The optimized catalyst showed the highest photocatalytic H₂O₂ evolution rate of 172 μmol/h, which is 1.9 and 2.5 times greater than that of TBCN and BCN, respectively. The photocatalytic oxidation of various lignocellulose-derived alcohols (such as furfural alcohol and vanillyl alcohol) and benzyl alcohol was also achieved. Photocatalytic activity data, physicochemical and optoelectronic features, and trapping experiments were conducted to elucidate the structure-activity relationships. The TBCN@rGO acts as a multifunctional Z-scheme photocatalyst having an oxygen vacancy, modulates surface acidity-basicity required for the adsorption and activation of the reactant molecules, and displays excellent photocatalytic performance due to the formation of a large number of active surface sites, increased electrical conductivity, improved charge transfer properties, outstanding photostability, and reusability. The present study establishes a unique strategy for improving H₂O₂ generation and alcohol oxidation activity and also provides insights into the significance of a surface vacancy in the semiconductor photocatalyst.

From pure water to hydrogen peroxide on a novel 2,5,8-triamino-tri-s-triazine (melem)-derived photocatalyst with a high apparent quantum efficiency

Photocatalytic hydrogen peroxide (H₂O₂) production is a green process but remains a great challenge. Herein, a novel photocatalyst with high activity for H₂O₂ production, is developed based on 2,5,8-triamino-tri-s-triazine (melem) by linking it with 2, 3-naphthalene dicarboxylic anhydride (NDA). The obtained melem/NDA hybrid not only exhibited narrowed band gap and obviously enhanced visible light absorption, but also showed reduced charge recombination originated from its spatial distribution in HOMO and LUMO induced by the introduction of NDA as verified by DFT calculations. More significantly, the sufficient LUMO and HOMO positions for the optimal sample, melem/NDA_0.5, ensured efficient H₂O₂ production from pure water via both the oxygen reduction reactions mainly through the two-step one-electron path and the water oxidation reaction through the one-step two-electron path. Consequently, melem/NDA_0.5 achieves an apparent quantum efficiency of as high as 6.9 % at 420 nm. This work sheds light on developing high-performance organic photocatalysts for boosting photocatalytic H₂O₂ production.

Molecularly Engineered Covalent Organic Frameworks for Hydrogen Peroxide Photosynthesis

Synthesizing H₂ O₂ from water and air via a photocatalytic approach is ideal for efficient production of this chemical at small-scale. However, the poor activity and selectivity of the 2 e^- water oxidation reaction (WOR) greatly restricts the efficiency of photocatalytic H₂ O₂ production. Herein we prepare a bipyridine-based covalent organic framework photocatalyst (denoted as COF-TfpBpy) for H₂ O₂ production from water and air. The solar-to-chemical conversion (SCC) efficiency at 298 K and 333 K is 0.57 % and 1.08 %, respectively, which are higher than the current reported highest value. The resulting H₂ O₂ solution is capable of degrading pollutants. A mechanistic study revealed that the excellent photocatalytic activity of COF-TfpBpy is due to the protonation of bipyridine monomer, which promotes the rate-determining reaction (2 e^- WOR) and then enhances Yeager-type oxygen adsorption to accelerate 2 e^- one-step oxygen reduction. This work demonstrates, for the first time, the COF-catalyzed photosynthesis of H₂ O₂ from water and air; and paves the way for wastewater treatment using photocatalytic H₂ O₂ solution.

Dual Active Centers Bridged by Oxygen Vacancies of Ru Single Atoms Hybrids Supported on Molybdenum Oxide for Photocatalytic Ammonia Synthesis

Photocatalytic synthesis of ammonia (NH 3 ) holds significant potential compared with the Haber-Bosch process. However, the reported photocatalysts suffered from low efficiency owing to localized electrons deficiency. Here, Ru-SA (single atoms)/H x MoO 3-y hybrids with abundant of Mo n+ (n < 6) species neighboring oxygen vacancies (O V ) are synthesized via a H-spillover process. Detailed characterizations demonstrate that Ru-SA/H x MoO 3 y hybrids can quantitatively produce NH 3 from N 2 and H 2 by the synergetic effect of dual active centers (Ru SA and Mo n+ ). That is, Ru SA boost the activation and migration of H 2 , and Mo n+ species act as the trapping sites of localized electrons and the adsorption and dissociation sites of N 2 , finally leading to NH 3 synthesis on Mo n+ -OH. The NH 3 generation rate is as high as 4.0 mmol h -1 g -1 , accompanied by an apparent quantum efficiency over 6.0% at 650 nm. Our finding may open up a new strategy for acquiring a better NH 3 synthesis approach under mild conditions.

Iodide-Induced Fragmentation of Polymerized Hydrophilic Carbon Nitride for High-Performance Quasi-Homogeneous Photocatalytic H2 O2 Production

Polymeric carbon nitride (PCN) as a class of two-electron oxygen reduction reaction (2 e^- ORR) photocatalyst has attracted much attention for H₂ O₂ production. However, the low activity and inferior selectivity of 2 e^- ORR greatly restrict the H₂ O₂ production efficiency. Herein, we develop a new strategy to synthesize hydrophilic, fragmented PCN photocatalyst by the terminating polymerization (TP-PCN) effect of iodide ions. The obtained TP-PCN with abundant edge active sites (AEASs), which can form quasi-homogeneous photocatalytic system, exhibits superior H₂ O₂ generation rate (3265.4 μM h^-1 ), far surpassing PCN and other PCN-based photocatalysts. DFT calculations further indicate that TP-PCN is more favorable for electron transiting from β spin-orbital to the π* orbitals of O₂ , which optimizes O₂ activation and reduces the energy barrier of H₂ O₂ formation. This work provides a new concept for designing functional photocatalysts and understanding the mechanism of O₂ activation in ORR for H₂ O₂ production.