Engineering Atomically Dispersed FeN 4 Active Sites for CO 2 Electroreduction

Catalytic conversion of carbon dioxide (CO2) using coal-based nano-carbon materials

Carbon dioxide (CO2) is a prominent greenhouse gas and a widely available carbon resource. The chemical conversion of CO2 into high-value chemicals and fuels is a significant approach for mitigating carbon emissions and attaining carbon neutrality. However, enhancing CO2 adsorption and conversion rates remains a primary challenge in CO2 recycling. The development of high-performance catalysts is pivotal for the catalytic conversion of CO2. In this context, coal-based carbon materials, characterized by their extensive specific surface area and adaptable chemical composition, can offer more reactive active sites and have robust CO2 adsorption capabilities. They can function as either standalone catalysts or as components of composite catalysts, making them promising materials for CO2 reduction. The use of affordable and abundant coal as a precursor for carbon materials represents a crucial avenue for achieving clean and efficient coal utilization. This paper reviews the progress of research on coal-based carbon materials and examines their advantages and challenges as catalysts for CO2 reduction.

Electrochemical Conversion of CO2 into Formate Boosted by In Situ Reconstruction of Bi-MOF to Bi2O2CO3 Ultrathin Nanosheets

Substantial emissions of CO2 have presented formidable challenges for global climate dynamics. Electrochemical reduction of CO2 to produce formic acid (HCOOH) is considered to be a promising approach for achieving carbon neutrality. Nevertheless, the development of a catalyst exhibiting both high catalytic activity and selectivity toward desired products remains an arduous task. Herein, we report the synthesis of a unique porous bismuth-based MOF (Bi-BTC) through microwave-assisted agitation. The Bi-BTC MOF has a good catalytic performance in electrochemical CO2RR to formate products. At -0.9 V (vs RHE) potential, the Faradaic efficiency of formate can reach 96%, and the current density of the CO2RR is 25 mA/cm2. Bi-BTC also exhibits good electrochemical stability. FEformate and current density were maintained for 24 h with almost no attenuation. It was found that Bi-BTC was reconstructed in the CO2RR process. The shape of nanocolumn before electrolysis is transformed into an ultrathin nanosheet. The soft and hard acid-base theory (HSAB) proves that the reason for the reconfiguration is that the hard base ions (HCO3-) and the intermediate acid (Bi3+) break in the Bi-O bond in Bi-MOF, resulting in the transition of the original column structure of Bi-BTC to Bi2O2CO3 ultrathin nanosheeets. The DFT calculation shows that the restructured Bi2O2CO3 nanosheet exposes a crystal surface structure, which is conducive to lower the activation energy barrier of the electrochemical CO2RR intermediate *OCHO and stabilizing the reaction intermediate. Therefore, it is more beneficial to improve the selectivity of the electrochemical CO2RR to formate formation. This result proves that irreversible reconfiguration of catalyst is beneficial to electrochemical CO2RR. In addition, coupling a Bi-BTC cathode with a stable anode (IrO2) enables battery-driven high-activity CO2RR and an OER with good activity and efficiency.

Saturated Coordination LuN6 Defect Sites for Highly Efficient Electroreduction of CO2

Metal single-atom and internal structural defects typically coexist in M-N-C materials obtained through the existing basic pyrolysis processes. Identifying a correlation between them to understand the structure-activity relationship and achieve efficient catalytic performance is important, particularly for the rare-earth (RE) elements with rich electron orbitals and strong coordination capabilities. Herein, a novel single-atom catalyst based on the RE element lutetium is successfully synthesized on a N-C support. Structural and simulation analyses demonstrate that the formation of a LuN6 structural site with an individual defect because of pyrolysis is thermodynamically favorable in Lu-N-C. Using KHCO3 -based electrolytes facilitates the fall of the K+ cations into the defective sites of Lu-N-C, thus enabling improved CO2 capture and activation, which increases the catalyst conductivity for Lu-N-C. In this study, the catalyst exhibits a Faradaic efficiency of 95.1% for CO at a current density of 18.2 mA cm-2 during carbon dioxide reduction reaction. This study thus provides new insights into understanding RE-N-C materials for energy utilization.

Combining Fe nanoparticles and pyrrole-type Fe-N4 sites on less-oxygenated carbon supports for electrochemical CO2 reduction

A great challenge for electrochemical CO2 reduction is to improve energy efficiency, which requires reducing overpotential while increasing product Faraday efficiency. Here, we designedly synthesize a hybrid electrocatalyst consisting of Fe nanoparticles, pyrrole-type Fe-N4 sites and less-oxygenated carbon supports, which exhibits a remarkable CO Faraday efficiency above 99% at an ultralow overpotential of 21 mV, reaching the highest cathode energy efficiency of 97.1% to date. The catalyst also can afford a CO selectivity nearly 100% with a high cathode energy efficiency (>90%) at least 100 h. The combined results of control experiments, in situ characterizations and theoretical calculations demonstrate that introducing Fe nanoparticles can reduce the overpotential by accelerating the proton transfer from CO2 to *COOH and lowering the free energy for *COOH formation, constructing pyrrole-type Fe-N4 sites and limiting oxygen species on carbon supports can increase CO Faraday efficiency through inhibiting the H2 evolution, thus achieving energy-efficient electrochemical CO2 reduction to CO.

Achievements, Challenges, and Perspectives on Nitrogen Electrochemistry for Carbon-Neutral Energy Technologies

Unrestrained anthropogenic activities have severely disrupted the global natural nitrogen cycle, causing numerous energy and environmental issues. Electrocatalytic nitrogen transformation is a feasible and promising strategy for achieving a sustainable nitrogen economy. Synergistically combining multiple nitrogen reactions can realize efficient renewable energy storage and conversion, restore the global nitrogen balance, and remediate environmental crises. Here, we provide a unique aspect to discuss the intriguing nitrogen electrochemistry by linking three essential nitrogen-containing compounds (i.e., N₂ , NH₃ , and NO₃ ^- ) and integrating four essential electrochemical reactions, i.e., the nitrogen reduction reaction (N₂ RR), nitrogen oxidation reaction (N₂ OR), nitrate reduction reaction (NO₃ RR), and ammonia oxidation reaction (NH₃ OR). This minireview also summarizes the acquired knowledge of rational catalyst design and underlying reaction mechanisms for these interlinked nitrogen reactions. We further underscore the associated clean energy technologies and a sustainable nitrogen-based economy.

Ambient Electrosynthesis of Urea with Nitrate and Carbon Dioxide over Iron-Based Dual-Sites

The development of efficient electrocatalysts to generate key *NH₂ and *CO intermediates is crucial for ambient urea electrosynthesis with nitrate (NO₃ ^- ) and carbon dioxide (CO₂ ). Here we report a liquid-phase laser irradiation method to fabricate symbiotic graphitic carbon encapsulated amorphous iron and iron oxide nanoparticles on carbon nanotubes (Fe(a)@C-Fe₃ O₄ /CNTs). Fe(a)@C-Fe₃ O₄ /CNTs exhibits superior electrocatalytic activity toward urea synthesis using NO₃ ^- and CO₂ , affording a urea yield of 1341.3±112.6 μg h^-1  mg_cat ^-1 and a faradic efficiency of 16.5±6.1 % at ambient conditions. Both experimental and theoretical results indicate that the formed Fe(a)@C and Fe₃ O₄ on CNTs provide dual active sites for the adsorption and activation of NO₃ ^- and CO₂ , thus generating key *NH₂ and *CO intermediates with lower energy barriers for urea formation. This work would be helpful for design and development of high-efficiency dual-site electrocatalysts for ambient urea synthesis.

Deciphering the Selectivity of the Electrochemical CO2 Reduction to CO by a Cobalt Porphyrin Catalyst in Neutral Aqueous Solution: Insights from DFT Calculations

Density functional theory (DFT) calculations were conducted to investigate the cobalt porphyrin-catalyzed electro-reduction of CO2 to CO in an aqueous solution. The results suggest that CoII -porphyrin (CoII -L) undertakes a ligand-based reduction to generate the active species CoII -L⋅- , where the CoII center antiferromagnetically interacts with the ligand radical anion. CoII -L⋅- then performs a nucleophilic attack on CO2 , followed by protonation and a reduction to give CoII -L-COOH. An intermolecular proton transfer leads to the heterolytic cleavage of the C-O bond, producing intermediate CoII -L-CO. Subsequently, CO is released from CoII -L-CO, and CoII -L is regenerated to catalyze the next cycle. The rate-determining step of this CO2 RR is the nucleophilic attack on CO2 by CoII -L⋅- , with a total barrier of 20.7 kcal mol-1 . The competing hydrogen evolution reaction is associated with a higher total barrier. A computational investigation regarding the substituent effects of the catalyst indicates that the CoPor-R3 complex is likely to display the highest activity and selectivity as a molecular catalyst.

Coupling Atomically Dispersed Fe-N5 Sites with Defective N-Doped Carbon Boosts CO2 Electroreduction

Atomically dispersed iron immobilized on nitrogen-doped carbon catalyst has attracted enormous attention for CO₂ electroreduction, but still suffers from low current density and poor selectivity. Herein, atomically dispersed FeN₅ active sites supported on defective N-doped carbon successfully formed by a multistep thermal treatment strategy with the aid of dicyandiamide are reported. This dual-functional strategy can not only construct intrinsic carbon defects by selectively etching pyridinic-N and pyrrolic-N, but also introduces an additional N from the neighboring carbon layer coordinating to the commonly observed FeN₄ , thus creating an FeN₅ active site supported on defective porous carbon nanofibers (FeN₅ /DPCF) with a local 3D configuration. The optimized FeN₅ /DPCF achieves a high CO Faradaic efficiency (>90%) over a wide potential range of -0.4 to -0.6 V versus RHE with a maximal FE_CO of 93.1%, a high CO partial current density of 9.4 mA cm^-2 at the low overpotential of 490 mV, and a remarkable turnover frequency of 2965 h^-1 . Density functional theory calculations reveal that the synergistic effect between the FeN₅ sites and carbon defects can enhance electronic localization, thus reducing the energy barrier for the CO₂ reduction reaction and suppressing the hydrogen evolution reaction, giving rise to the superior activity and selectivity.

Microenvironment Modulation in Carbon-Supported Single-Atom Catalysts for Efficient Electrocatalytic CO2 Reduction

The electrocatalytic CO 2 reduction reaction (ECRR) becomes an effective way to reduce excess CO 2 in the air and a promising strategy to maintain carbon balance. Carbon-supported single-atom catalysts (C-SACs) is a kind of cost savings and most promising catalysts for ECRR. For C-SACs, the key to achieving efficient ECRR performance is to adjusting the electronic structure of the central metal atoms by modulating their microenvironment of the catalysts. Not only the coordination numbers and hetero-atom coordination, but also the regulation of diatomic sites have a great influence on the performance of C-SACs. This review mainly focuses on recent studies for the microenvironment modulation in C-SACs for efficient ECRR. We hope that this review can contribute readers a comprehensive insight in the current research status of C-SACs for ECRR, as well as provide help for the rational design of C-SACs with better ECRR performance.

Atomically Dispersed Dual-Metal Site Catalysts for Enhanced CO2 Reduction: Mechanistic Insight into Active Site Structures

Carbon-supported nitrogen-coordinated single-metal site catalysts (i.e., M-N-C, M: Fe, Co, or Ni) are active for the electrochemical CO₂ reduction reaction (CO₂ RR) to CO. Further improving their intrinsic activity and selectivity by tuning their N-M bond structures and coordination is limited. Herein, we expand the coordination environments of M-N-C catalysts by designing dual-metal active sites. The Ni-Fe catalyst exhibited the most efficient CO2RR activity and promising stability compared to other combinations. Advanced structural characterization and theoretical prediction suggest that the most active N-coordinated dual-metal site configurations are 2N-bridged (Fe-Ni)N₆ , in which FeN₄ and NiN₄ moieties are shared with two N atoms. Two metals (i.e., Fe and Ni) in the dual-metal site likely generate a synergy to enable more optimal *COOH adsorption and *CO desorption than single-metal sites (FeN₄ or NiN₄ ) with improved intrinsic catalytic activity and selectivity.

Atomic- and Molecular-Level Modulation of Dispersed Active Sites for Electrocatalytic CO2 Reduction

Global climate changes have been impacted by the excessive CO 2 emission, which exacerbates the environmental problems. Electrochemical CO 2 reduction (CO 2 RR) offers the solution for utilizing CO 2 as feedstocks for value-added products while potentially mitigating the negative effects. Owing to the extreme stability of CO 2 , selectivity and efficiency are crucial factors in the development of CO 2 RR electrocatalysts. Recently, single-atom catalysts have emerged as potential electrocatalysts for CO 2 reduction. They generally comprise of atomically- and molecularly dispersed active sites over conductive supports, which enable atomic-level and molecular-level modulations. In this minireview, catalyst preparations, principle of modulations, and reaction mechanisms are summarised together with related recent advances. The atomic-level modulations are first discussed, followed by the molecular-level modulations. Finally, the current challenges and future opportunities are provided as guidance for further developments regarding the discussed topics.

Temperature-Dependent CO2 Electroreduction over Fe-N-C and Ni-N-C Single-Atom Catalysts

Reaction temperature is an important parameter to tune the selectivity and activity of electrochemical CO₂ reduction reaction (CO₂ RR) due to different thermodynamics of CO₂ RR and competitive hydrogen evolution reaction (HER). In this work, temperature-dependent CO₂ RR over Fe-N-C and Ni-N-C single-atom catalysts are investigated from 303 to 343 K. Increasing the reaction temperature improves and decreases CO Faradaic efficiency over Fe-N-C and Ni-N-C catalysts at high overpotentials, respectively. CO current density over Fe-N-C catalyst increases with temperature, then gets into a plateau at 323 K, finally reaches the maximum value of 185.8 mA cm^-2 at 343 K. While CO current density over Ni-N-C catalyst achieves the maximum value of 252.5 mA cm^-2 at 323 K, and then drops significantly to 202.9 mA cm^-2 at 343 K. Temperature programmed desorption results and density functional theory calculations reveal that the difference of temperature-dependent variation on CO Faradaic efficiency and current density between Fe-N-C and Ni-N-C catalysts results from the varied adsorption strength of key reaction intermediates during CO₂ RR.

Phosphorus Induced Electron Localization of Single Iron Sites for Boosted CO2 Electroreduction Reaction

Electrochemical reduction of carbon dioxide (CO₂ ) into chemicals and fuels has recently attracted much interest, but normally suffers from a high overpotential and low selectivity. In this work, single P atoms were introduced into a N-doped carbon supported single Fe atom catalyst (Fe-SAC/NPC) mainly in the form of P-C bonds for CO₂ electroreduction to CO in an aqueous solution. This catalyst exhibited a CO Faradaic efficiency of ≈97 % at a low overpotential of 320 mV, and a Tafel slope of only 59 mV dec^-1 , comparable to state-of-the-art gold catalysts. Experimental analysis combined with DFT calculations suggested that single P atom in high coordination shells (n≥3), in particular the third coordination shell of Fe center enhanced the electronic localization of Fe, which improved the stabilization of the key *COOH intermediate on Fe, leading to superior CO₂ electrochemical reduction performance at low overpotentials.

Pore Modification and Phosphorus Doping Effect on Phosphoric Acid-Activated Fe-N-C for Alkaline Oxygen Reduction Reaction

The price and scarcity of platinum has driven up the demand for non-precious metal catalysts such as Fe-N-C. In this study, the effects of phosphoric acid (PA) activation and phosphorus doping were investigated using Fe-N-C catalysts prepared using SBA-15 as a sacrificial template. The physical and structural changes caused by the addition of PA were analyzed by nitrogen adsorption/desorption and X-ray diffraction. Analysis of the electronic states of Fe, N, and P were conducted by X-ray photoelectron spectroscopy. The amount and size of micropores varied depending on the PA content, with changes in pore structure observed using 0.066 g of PA. The electronic states of Fe and N did not change significantly after treatment with PA, and P was mainly found in states bonded to oxygen or carbon. When 0.135 g of PA was introduced per 1 g of silica, a catalytic activity which was increased slightly by 10 mV at −3 mA/cm² was observed. A change in Fe-N-C stability was also observed through the introduction of PA.

A Supported Pd2 Dual-Atom Site Catalyst for Efficient Electrochemical CO2 Reduction

Dual-atom site catalysts (DACs) have emerged as a new frontier in heterogeneous catalysis because the synergistic effect between adjacent metal atoms can promote their catalytic activity while maintaining the advantages of single-atom site catalysts (SACs), like 100 % atomic utilization efficiency and excellent selectivity. Herein, a supported Pd₂ DAC was synthesized and used for electrochemical CO₂ reduction reaction (CO₂ RR) for the first time. The as-obtained Pd₂ DAC exhibited superior CO₂ RR catalytic performance with 98.2 % CO faradic efficiency at -0.85 V vs. RHE, far exceeding that of Pd₁ SAC, and coupled with long-term stability. The density functional theory (DFT) calculations revealed that the intrinsic reason for the superior activity of Pd₂ DAC toward CO₂ RR was the electron transfer between Pd atoms at the dimeric Pd sites. Thus, Pd₂ DAC possessed moderate adsorption strength of CO*, which was beneficial for CO production in CO₂ RR.

Dynamically Unveiling Metal-Nitrogen Coordination during Thermal Activation to Design High-Efficient Atomically Dispersed CoN4 Active Sites

We elucidate the structural evolution of CoN₄ sites during thermal activation by developing a zeolitic imidazolate framework (ZIF)-8-derived carbon host as an ideal model for Co²⁺ ion adsorption. Subsequent in situ X-ray absorption spectroscopy analysis can dynamically track the conversion from inactive Co-OH and Co-O species into active CoN₄ sites. The critical transition occurs at 700 °C and becomes optimal at 900 °C, generating the highest intrinsic activity and four-electron selectivity for the oxygen reduction reaction (ORR). DFT calculations elucidate that the ORR is kinetically favored by the thermal-induced compressive strain of Co-N bonds in CoN₄ active sites formed at 900 °C. Further, we developed a two-step (i.e., Co ion doping and adsorption) Co-N-C catalyst with increased CoN₄ site density and optimized porosity for mass transport, and demonstrated its outstanding fuel cell performance and durability.