Non‐Solvating and Low‐Dielectricity Cosolvent for Anion‐Derived Solid Electrolyte Interphases in Lithium Metal Batteries

An Amphiphilic Molecule-Regulated Core-Shell-Solvation Electrolyte for Li-Metal Batteries at Ultra-Low Temperature

Lithium metal batteries hold great promise for promoting energy density and operating at low temperatures, yet they still suffer from insufficient Li compatibility and slow kinetic, especially at ultra-low temperatures. Herein, we rationally design and synthesize a new amphiphilic solvent, 1,1,2,2-tetrafluoro-3-methoxypropane, for use in battery electrolytes. The lithiophilic segment is readily to solvate Li⁺ to induce self-assembly of the electrolyte solution to form a peculiar core-shell-solvation structure. Such unique solvation structure not only largely improves the ionic conductivity to allow fast Li⁺ transport and lower the desolvation energy to enable facile desolvation, but also leads to the formation of a highly robust and conductive inorganic SEI. The resulting electrolyte demonstrates high Li efficiency and superior cycling stability from room temperature to -40 °C at high current densities. Meanwhile, anode-free high-voltage cell retains 87 % capacity after 100 cycles.

The Anionic Chemistry in Regulating the Reductive Stability of Electrolytes for Lithium Metal Batteries

Advanced electrolyte design is essential for building high-energy-density lithium (Li) batteries, and introducing anions into the Li⁺ solvation sheaths has been widely demonstrated as a promising strategy. However, a fundamental understanding of the critical role of anions in such electrolytes is very lacking. Herein, the anionic chemistry in regulating the electrolyte structure and stability is probed by combining computational and experimental approaches. Based on a comprehensive analysis of the lowest unoccupied molecular orbitals, the solvents and anions in Li⁺ solvation sheaths exhibit enhanced and decreased reductive stability compared with free counterparts, respectively, which agrees with both calculated and experimental results of reduction potentials. Accordingly, new strategies are proposed to build stable electrolytes based on the established anionic chemistry. This work unveils the mysterious anionic chemistry in regulating the structure-function relationship of electrolytes and contributes to a rational design of advanced electrolytes for practical Li metal batteries.

Intrinsic Nonflammable Ether Electrolytes for Ultrahigh-Voltage Lithium Metal Batteries Enabled by Chlorine Functionality

The issues of inherent low anodic stability and high flammability hinder the deployment of the ether-based electrolytes in practical high-voltage lithium metal batteries. Here, we report a rationally designed ether-based electrolyte with chlorine functionality on ether molecular structure to address these critical challenges. The chloroether-based electrolyte demonstrates a high Li Coulombic efficiency of 99.2 % and a high capacity retention >88 % over 200 cycles for Ni-rich cathodes at an ultrahigh cut-off voltage of 4.6 V (stable even up to 4.7 V). The chloroether-based electrolyte not only greatly improves electrochemical stabilities of Ni-rich cathodes under ultrahigh voltages with interphases riched in LiF and LiCl, but possesses the intrinsic nonflammable safety feature owing to the flame-retarding ability of chlorine functional groups. This study offers a new approach to enable ether-based electrolytes for high energy density, long-life and safe Li metal batteries.

Anion-Reinforced Solvation for a Gradient Inorganic-Rich Interphase Enables High-Rate and Stable Sodium Batteries

Metallic Na is a promising anode for rechargeable batteries, however, it is plagued by an unstable solid electrolyte interphase (SEI) and Na dendrites. Herein, a robust anion-derived SEI is constructed on Na anode in a high-concentration 1,2-dimethoxyethane (DME) based electrolyte with a cosolvent hydrofluoroether, which effectively restrains Na dendrite growth. The hydrofluoroether can tune the solvation configuration of the electrolyte from three-dimensional network aggregates to solvent-cation-anion clusters, enabling more anions to enter and reinforce the inner solvation sheath and their stepwise decomposition. The gradient inorganic-rich SEI leads to a reduced energy barrier of Na⁺ migration and enhanced interfacial kinetics. These render the Na||Na₃ V₂ (PO₄ )₃ battery with an excellent rate capability of 79.9 mAh g^-1 at 24 C and a high capacity retention of 94.2 % after 6000 cycles at 2 C. This highlights the modulation of the electrode-electrolyte interphase chemistry for advanced batteries.

Phenoxy Radical-Induced Formation of Dual-Layered Protection Film for High-Rate and Dendrite-Free Lithium-Metal Anodes

The uncontrollable dendrite growth of Li metal anode leads to poor cycle stability and safety concerns, hindering its utilization in high energy density batteries. Herein, a phenoxy radical Spiro-O8 is proposed as an artificial protection film for Li metal anode owing to its excellent film-forming capability and remarkable ionic conductivity. A spontaneous redox reaction between the Spiro-O8 and Li metal results in the formation of a uniform and highly ionic conductive organic film in the bottom. Meanwhile, the phenoxy radicals on surface of Spiro-O8 facilitate the decomposition of Li salt upon exposed to the ether electrolyte and lead the formation of LiF film on the top. Arising from the synergistic effects of inner high ionic conductive film and outer rigid film, stable Li plating/stripping can be realized at a high current density (4000 cycles at 10 mA cm^-2 ) and a high areal capacity of 5 mAh cm^-2 for 550 h with an ultrahigh Li utilization rate of 54.6 %. As a proof of concept, this work shows a facile strategy to rationally fabricate dual-layered interfaces for Li metal anodes.

Nano and Battery Anode: A Review

Improving the anode properties, including increasing its capacity, is one of the basic necessities to improve battery performance. In this paper, high-capacity anodes with alloy performance are introduced, then the problem of fragmentation of these anodes and its effect during the cyclic life is stated. Then, the effect of reducing the size to the nanoscale in solving the problem of fragmentation and improving the properties is discussed, and finally the various forms of nanomaterials are examined. In this paper, electrode reduction in the anode, which is a nanoscale phenomenon, is described. The negative effects of this phenomenon on alloy anodes are expressed and how to eliminate these negative effects by preparing suitable nanostructures will be discussed. Also, the anodes of the titanium oxide family are introduced and the effects of Nano on the performance improvement of these anodes are expressed, and finally, the quasi-capacitive behavior, which is specific to Nano, will be introduced. Finally, the third type of anodes, exchange anodes, is introduced and their function is expressed. The effect of Nano on the reversibility of these anodes is mentioned. The advantages of nanotechnology for these electrodes are described. In this paper, it is found that nanotechnology, in addition to the common effects such as reducing the penetration distance and modulating the stress, also creates other interesting effects in this type of anode, such as capacitive quasi-capacitance, changing storage mechanism and lower volume change.

Stable Anion-Derived Solid Electrolyte Interphase in Lithium Metal Batteries

High-energy-density lithium (Li) metal batteries are severely hindered by the dendritic Li deposition dictated by non-uniform solid electrolyte interphase (SEI). Despite its unique advantages in improving the uniformity of Li deposition, the current anion-derived SEI is unsatisfactory under practical conditions. Herein regulating the electrolyte structure of anions by anion receptors was proposed to construct stable anion-derived SEI. Tris(pentafluorophenyl)borane (TPFPB) anion acceptors with electron-deficient boron atoms interact with bis(fluorosulfonyl)imide anions (FSI^- ) and decrease the reduction stability of FSI^- . Furthermore, the type of aggregate cluster of FSI^- in electrolyte changes, FSI^- interacting with more Li ions in the presence of TPFPB. Therefore, the decomposition of FSI^- to form Li₂ S is promoted, improving the stability of anion-derived SEI. In working Li | LiNi_0.5 Co_0.2 Mn_0.3 O₂ batteries under practical conditions, the anion-derived SEI with TPFPB undergoes 194 cycles compared with 98 cycles of routine anion-derived SEI. This work inspires a fresh ground to construct stable anion-derived SEI by manipulating the electrolyte structure of anions.

An Atomic Insight into the Chemical Origin and Variation of the Dielectric Constant in Liquid Electrolytes

The dielectric constant is a crucial physicochemical property of liquids in tuning solute-solvent interactions and solvation microstructures. Herein the dielectric constant variation of liquid electrolytes regarding to temperatures and electrolyte compositions is probed by molecular dynamics simulations. Dielectric constants of solvents reduce as temperatures increase due to accelerated mobility of molecules. For solvent mixtures with different mixing ratios, their dielectric constants either follow a linear superposition rule or satisfy a polynomial function, depending on weak or strong intermolecular interactions. Dielectric constants of electrolytes exhibit a volcano trend with increasing salt concentrations, which can be attributed to dielectric contributions from salts and formation of solvation structures. This work affords an atomic insight into the dielectric constant variation and its chemical origin, which can deepen the fundamental understanding of solution chemistry.