Single-Crystal Dendritic Micro-Pines of Magnetic α-Fe2O3: Large-Scale Synthesis, Formation Mechanism, and Properties

Deterministic Formation and Growth of Dendritic Crystals of Attractive Colloids

Dendrites are ubiquitous crystals produced in supersaturated solutions and supercooled melts, but considerably less is known about their formation and growth kinetics. Here, the key factors are explored that dictate dendrite formation and growth, utilizing experimental colloidal models in which the particles act as molecules with Mie potential. Depletion attraction is employed to colloids and manipulate their strength to control supersaturation. Dendrites are predominantly produced under conditions of low supersaturation, where the separation between crystals is large due to slow nucleation. The dendrites do not emerge directly from nuclei. Instead, isotropic grains, initially produced from nuclei, morph into polygons. Arms then sprout from the vertices of these polygons, eventually giving rise to dendrites. Triggering this polygon-to-dendrite transformation requires a high diffusional flux. This necessitates a prolonged diffusion time to maintain a steep concentration gradient in the surrounding environment even after the transformation from circular grains to polygons.

Dual-signal ratiometric electrochemical immunosensor constructed with snowflake-like FeSe2-AuNPs and PAA-ZIF@TB for sensitive detection of CYFRA21-1

In this study, a ratiometric electrochemical immunosensor has been developed to detect the cytokeratin 19 fragment 21-1 (CYFRA21-1) biomarker in a highly sensitive manner through a dual-signal output model. As one of signal indicators, snowflake-like FeSe₂ loaded with AuNPs (FeSe₂-AuNPs) as sensing substrate with good conductivity and large active sites provides a differential pulse voltammetry (DPV) signal at +0.4 V. Another signal indicator, toluidine blue (TB) with the water-solubility property is an excellent redox probe that can generate DPV signal at -0.3 V. To solve the water-solubility problem, the TB is absorbed with polyacrylic acid (PAA) functionalized ZIF-67 (PAA-ZIF-67), which retains the properties of ZIF-67 that are large specific surface area and strong adsorption properties. The ratio of signals, stemmed from PAA-ZIF@TB and FeSe₂-AuNPs (I_PAA-ZIF@TB/I_FeSe2-AuNPs), increases with the CYFRA21-1 concentration. Under optimal experimental conditions, CYFRA21-1 was detected in a wide dynamic range from 0.1 pg/mL to 100 ng/mL, with a lower limit of detection of 0.02 pg/mL. Looking ahead, this ratio based strategy provides prospective clinical applications for detecting other biomarkers.

Recent advances in perovskite oxides for non-enzymatic electrochemical sensors: A review

Non-enzymatic electrochemical sensors with significant advantages of high sensitivity, long-term stability, and excellent reproducibility, are one promising technology to solve many challenges, such as the detection of toxic substances and viruses. Among various materials, perovskite oxides have become a promising candidate for use in non-enzymatic electrochemical sensors because of their low cost, flexible structure, and high intrinsic catalytic activity. A comprehensive overview of the recent advances in perovskite oxides for non-enzymatic electrochemical sensors is provided, which includes the synthesis methods of nanostructured perovskites and the electrocatalytic mechanisms of perovskite catalysts. The better sensing performance of perovskite oxides is mainly due to the lattice O vacancies and superoxide oxygen ions (O₂^2-/O^-), which are generated by the transfer of lattice oxygen to adsorbed -OH and have performed excellent properties suitable for electrooxidation of analytes. However, the limited electron transfer kinetics, stability, and selectivity of perovskite oxides alone make perovskite oxides far from ready for scientific development. Therefore, composites of perovskite oxides with other materials like graphitic carbon, metals, metal compounds, conducting organics, and biomolecules are summarized. Furthermore, a brief section describing the future challenges and the corresponding recommendation is presented in this review.

Magnetic biosensors for identification of SARS-CoV-2, Influenza, HIV, and Ebola viruses: a review

Infectious diseases such as novel coronavirus (SARS-CoV-2), Influenza, HIV, Ebola, etc kill many people around the world every year (SARS-CoV-2 in 2019, Ebola in 2013, HIV in 1980, Influenza in 1918). For example, SARS-CoV-2 has plagued higher than 317 000 000 people around the world from December 2019 to January 13, 2022. Some infectious diseases do not yet have not a proper vaccine, drug, therapeutic, and/or detection method, which makes rapid identification and definitive treatments the main challenges. Different device techniques have been used to detect infectious diseases. However, in recent years, magnetic materials have emerged as active sensors/biosensors for detecting viral, bacterial, and plasmids agents. In this review, the recent applications of magnetic materials in biosensors for infectious viruses detection have been discussed. Also, this work addresses the future trends and perspectives of magnetic biosensors.

Rare earth-doped nanocrystals for bioimaging in the near-infrared region

Rare earth-doped nanocrystals are widely used in medical diagnostics and bioimaging due to their narrow luminescence emission spectra (10-20 nm), long lifetime, and no photobleaching properties. Especially in the near-infrared (NIR) region, deeper tissue imaging can be achieved with low background luminescence and high spatial resolution. Further precise image-guided diagnosis and treatment can be achieved by using multimodal imaging such as MRI/CT/NIR/PA. Here, we focus on the construction of rare earth-doped nanocrystals, optical properties, and progress of such nanocomposites for bioimaging in the NIR region. In addition, the limitations at this stage in the field of bioimaging and the prospects for future technological development of rare earth-doped nanocrystals are present.

Synchronous assembly of chiral skeletal single-crystalline microvessels

Skeletal or concave polyhedral crystals appear in a variety of synthetic processes and natural environments. However, their morphology, size, and orientation are difficult to control because of their highly kinetic growth character. We report a methodology to achieve synchronous, uniaxial, and stepwise growth of micrometer-scale skeletal single crystals from planar-chiral double-decker molecules. Upon drop-casting of a heated ethanol solution onto a quartz substrate, the molecules spontaneously assemble into standing vessel-shaped single crystals uniaxially and synchronously over the wide area of the substrate, with small size polydispersity. The crystal edge is active even after consumption of the molecules and resumes stereoselective growth with successive feeding. The resultant morphology can be packed into polycyclic aromatic hydrocarbon-like microarchitectures and behaves as a microscopic container.

A Low-Temperature Hydrothermal Synthesis of Prussian Blue Nanocrystal and Its Application in H2O2 Detection

Uniform Prussian blue Fe3[Fe(CN)6]2 nanocrystals were synthesized by a direct dissociation and reduction of the single-Fe(III)-source precursor K3Fe(CN)6 under low-temperature hydrothermal conditions. UV-visible absorption spectrum, Fourier transform infrared spectrum, X-ray diffraction, field emission scanning electron microscope, X-ray photoelectron spectra, high-resolution transmission electron microscopy, and electrochemical testing were used to characterize and verify the synthesized Prussian blue nanocrystal product. The size of the synthesized product had a strong dependence on the acidity condition and the concentration of K3Fe(CN)6 solution. This result may facilitate not only the exploration of preparing Fe3[Fe(CN)6]2 nanocrystals for particular applications but also an in-depth explanation of the nature of the hydrothermal reaction. The Prussian blue nanocrystals were deposited onto an electrode support through lyotropic liquid crystalline templates to detect hydrogen peroxide (H2O2) by reduction reaction. Cyclic voltammograms showed that the Prussian blue modified electrode was of excellent electrocatalytic activity for H2O2. This electrode demonstrated a detection limit (1 × 10−7 M) and a linear range starting from the detection limit and extending over 6 orders of magnitude of H2O2 concentrations (1 × 10−7 to 1 × 10−1 M), which was of excellent performance in detecting H2O2.

DFT study on the electronic structure and optical properties of an Au-deposited α-Fe2O3 (001) surface

The electronic structure and optical properties of gold clusters deposited on an α-Fe2O3 surface were studied by using density functional theory (DFT), with a special emphasis on the influence of Au cluster sizes. There is a strong interaction between Au clusters and the α-Fe2O3 surface, and the binding energy increases with an increase of Au cluster size. The Au atoms of the gold cluster are bonded to the iron atoms of the α-Fe2O3 surface for the Au/α-Fe2O3 system, and the electrons transfer from the Au cluster to the α-Fe2O3 surface with the largest number of electrons transferred for 4Au/α-Fe2O3. The peaks of the refractive index, extinction coefficient and dielectric function induced by Au clusters appear in the visible range, which results in the enhanced optical absorption for the Au/α-Fe2O3 system. The optical absorption intensifies with increasing Au cluster size in the visible range, showing a maximum value for 4Au/α-Fe2O3. Further increasing the Au cluster size above 4Au results in a decrease in absorption intensity. The results are in good agreement with those of the refractive index, extinction coefficient and dielectric function.

Morphology-driven gas sensing by fabricated fractals: A review

Fractals are intriguing structures that repeat themselves at various length scales. Interestingly, fractals can also be fabricated artificially in labs under controlled growth environments and be explored for various applications. Such fractals have a repeating unit that spans in length from nano- to millimeter range. Fractals thus can be regarded as connectors that structurally bridge the gap between the nano- and the macroscopic worlds and have a hybrid structure of pores and repeating units. This article presents a comprehensive review on inorganic fabricated fractals (fab-fracs) synthesized in labs and employed as gas sensors across materials, morphologies, and gas analytes. The focus is to investigate the morphology-driven gas response of these fab-fracs and identify key parameters of fractal geometry in influencing gas response. Fab-fracs with roughened microstructure, pore-network connectivity, and fractal dimension (D) less than 2 are projected to be possessing better gas sensing capabilities. Fab-fracs with these salient features will help in designing the commercial gas sensors with better performance.

Green Synthesis of Nanomaterials

Nanotechnology is considered one of the paramount forefronts in science over the last decade. Its versatile implementations and fast-growing demand have paved the way for innovative measures for the synthesis of higher quality nanomaterials. In the early stages, traditional synthesis methods were utilized, and they relied on both carcinogenic chemicals and high energy input for production of nano-sized material. The pollution produced as a result of traditional synthesis methods induces a need for environmentally safer synthesis methods. As the downfalls of climate change become more abundant, the scientific community is persistently seeking solutions to combat the devastation caused by toxic production methods. Green methods for nanomaterial synthesis apply natural biological systems to nanomaterial production. The present review highlights the history of nanoparticle synthesis, starting with traditional methods and progressing towards green methods. Green synthesis is a method just as effective, if not more so, than traditional synthesis; it provides a sustainable approach to nanomaterial manufacturing by using naturally sourced starting materials and relying on low energy processes. The recent use of active molecules in natural biological systems such as bacteria, yeast, algae and fungi report successful results in the synthesis of various nanoparticle systems. Thus, the integration of green synthesis in scientific research and mass production provides a potential solution to the limitations of traditional synthesis methods.

Unusual Surface Texture, Dimensions and Morphology Variations of Chiral and Single Crystals*

We demonstrate here a unique metallo-organic material where the appearance and the internal crystal structure are in contradiction. The egg-shaped (ovoid) crystals have a brain-like texture. Although these micro-sized crystals are monodispersed; like fingerprints their grainy surfaces are never exactly alike. Remarkably, our X-ray and electron diffraction studies unexpectedly revealed that these structures are single-crystals comprising a continuous coordination network of two differently shaped homochiral channels. By using the same building blocks under different reaction conditions, a rare series of crystals have been obtained that are uniquely rounded in their shape. In stark contrast to the brain-like crystals, these isostructural and monodispersed crystals have a comparatively smooth appearance. The sizes of these crystals vary by several orders of magnitude.

Metal Oxide-Related Dendritic Structures: Self-Assembly and Applications for Sensor, Catalysis, Energy Conversion and Beyond

In the past two decades, we have learned a great deal about self-assembly of dendritic metal oxide structures, partially inspired by the nanostructures mimicking the aesthetic hierarchical structures of ferns and corals. The self-assembly process involves either anisotropic polycondensation or molecular recognition mechanisms. The major driving force for research in this field is due to the wide variety of applications in addition to the unique structures and properties of these dendritic nanostructures. Our purpose of this minireview is twofold: (1) to showcase what we have learned so far about how the self-assembly process occurs; and (2) to encourage people to use this type of material for drug delivery, renewable energy conversion and storage, biomaterials, and electronic noses.

Moisture-Driven Degradation Pathways in Prussian White Cathode Material for Sodium-Ion Batteries

The high-theoretical-capacity (∼170 mAh/g) Prussian white (PW), Na_xFe[Fe(CN)₆]_y·nH₂O, is one of the most promising candidates for Na-ion batteries on the cusp of commercialization. However, it has limitations such as high variability of reported stable practical capacity and cycling stability. A key factor that has been identified to affect the performance of PW is water content in the structure. However, the impact of airborne moisture exposure on the electrochemical performance of PW and the chemical mechanisms leading to performance decay have not yet been explored. Herein, we for the first time systematically studied the influence of humidity on the structural and electrochemical properties of monoclinic hydrated (M-PW) and rhombohedral dehydrated (R-PW) Prussian white. It is identified that moisture-driven capacity fading proceeds via two steps, first by sodium from the bulk material reacting with moisture at the surface to form sodium hydroxide and partial oxidation of Fe²⁺ to Fe³⁺. The sodium hydroxide creates a basic environment at the surface of the PW particles, leading to decomposition to Na₄[Fe(CN)₆] and iron oxides. Although the first process leads to loss of capacity, which can be reversed, the second stage of degradation is irreversible. Over time, both processes lead to the formation of a passivating surface layer, which prevents both reversible and irreversible capacity losses. This study thus presents a significant step toward understanding the large performance variations presented in the literature for PW. From this study, strategies aimed at limiting moisture-driven degradation can be designed and their efficacy assessed.

Hierarchical NiMoO4@Co3V2O8 hybrid nanorod/nanosphere clusters as advanced electrodes for high-performance electrochemical energy storage

Herein, a synergistic strategy to construct hierarchical NiMoO₄@Co₃V₂O₈ (denoted as NMO@CVO) hybrid nanorod/nanosphere clusters is proposed for the first time, where Co₃V₂O₈ nanospheres (denoted as CVO) have been uniformly immobilized on the surface of the NiMoO₄ nanorods (denoted as NMO) via a facile two-step hydrothermal method. Due to the surface recombination effect between NMO and CVO, the as-prepared NMO@CVO effectively avoids the aggregation of CVO nanosphere clusters. The unique hybrid architecture can make the most of the large interfacial area and abundant active sites for storing charge, which is greatly beneficial for the rapid diffusion of electrolyte ions and fast electron transport. The optimized NMO@CVO-8 composite nanostructure displays battery-like behavior with a maximum specific capacity of 357 C g^-1, excellent rate capability (77.8% retention with the current density increasing by 10 times) and remarkable cycling stability. In addition, an aqueous asymmetric energy storage device is assembled based on the NMO@CVO-8 hybrid nanorod/nanosphere clusters and activated carbon. The device shows an ultrahigh energy density of 48.5 W h kg^-1 at a power density of 839.1 W kg^-1, good rate capability (20.9 W h kg^-1 even at 7833.7 W kg^-1) and excellent cycling stability (83.5% capacitance retention after 5000 cycles). More notably, two charged devices in series can light up a red light-emitting diode (LED) for 20 min, demonstrating its potential in future energy storage applications. This work indicates that the hierarchical NiMoO₄@Co₃V₂O₈-8 hybrid nanorod/nanosphere clusters are promising energy storage materials for future practical applications and also provides a rational strategy for fabricating novel nanostructured materials for high-performance energy storage.

Three-Dimensional Microstructure of ε-Fe2O3 Crystals in Ancient Chinese Sauce Glaze Porcelain Revealed by Focused Ion Beam Scanning Electron Microscopy

Ancient Chinese sauce glaze porcelain has recently received growing attention for the discovery of epsilon iron oxide (ε-Fe₂O₃) crystals in glaze. In this work, we first confirm the presence of ε-Fe₂O₃ microcrystals, in large quantiteis, in sauce glaze porcelain fired at the Qilizhen kiln in Jiangxi province during the Southern Song dynasty. We then employed focused ion beam scanning electron microscopy (FIB-SEM) to investigate the three-dimensional microstructure of ε-Fe₂O₃ microcrystals, which revealed three well-separated layers (labeled, respectively, as LY1, LY2, and LY3 from the glaze surface to inside) under the glaze surface. Specifically, LY1 consists of well-defined dendritic fractal structure with high ordered branches at micrometers scale, LY2 has spherical or irregular-shaped particles at nanometers scale, while LY3 consists of dendrites with four, six, or eight primary branches ranging from several nanometers to around 1 μm. Given these findings, we proposed a process for the possible growth of ε-Fe₂O₃ microcrystals in ancient Chinese sauce glaze.

Self-assembly of nickel: from nanoparticles to foils with tunable magnetic properties

Self-assembly of nickel from nanoparticles to nanowires and foils can be achieved by controlling the concentrations of sodium citrate during the electroless deposition process.

Exploring Burstein–Moss type effects in nickel doped hematite dendrite nanostructures for enhanced photo-electrochemical water splitting

The Burstein–Moss suggests which that the optical band gap of degenerately doped semiconductors increases when all states close to the conduction band get populated is important to obtain different optical properties for the same material.

An electrochemical approach towards the controllable synthesis of highly ordered and hierarchical zinc oxide dendritic crystals composed of hexagonal nanosheets: some insights into the stacking-assembly of the hierarchical architecture

Herein, an electrochemical synthetic approach is presented to produce a highly ordered and hierarchical zinc oxide dendrite architecture composed of hexagonal nanosheets.

Pulse electrodeposited nickel with structure directing agents as an electrocatalyst for oxidation of glycerol

Electrodeposition of Ni, Ni–CA and Ni–TBr on mild steel using a pulse technique for electro-oxidation of glycerol.

Controlled Synthesis and Microstructure of Metastable Flower-Like Vaterite

Developing a simple morphology-controlled synthesis of metastable vaterite is a goal in the field of materials research. In this paper, we successfully synthesized flower-like dendritic vaterite crystals using a microwave method with 2-naphthaleneacetic acid (2-NAA) and ethylene glycol (EG) as the regulating additives. The results show that the morphology of vaterite could be regulated by inducing a monolayer or multilayer flower-like structure with the appropriate choice of regulators. Interestingly, the microstructure analysis showed that such flower-like vaterite dendrites host two different kinds of crystal cells. The negative carbonate 2-NAA effectively neutralized the charge of the vaterite (001) plane, resulting in the crystalline growth along the direction parallel to it and inducing a flower-like morphology. This experiment reveals an alternative approach to controlling hierarchical structures during the synthesis of similar classes of minerals.

The production of an efficient visible light photocatalyst for CO oxidation through the surface plasmonic effect of Ag nanoparticles on SiO2@α-Fe2O3 nanocomposites

A process for the photo deposition of noble Ag nanoparticles on a core-shell structure of SiO2@α-Fe2O3 nanocomposite spheres was performed to produce a CO photo oxidation catalyst. The structural analyses were carried out for samples produced using different Ag metal nanoparticle weight percentages on SiO2@α-Fe2O3 nanocomposite spheres by X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), UV-vis spectroscopy, Raman spectroscopy and Fourier transform infrared spectroscopy (FTIR). A computational study was also performed to confirm the existence of the synergic effect of surface plasmon resonance (SPR) for different weight percentages of Ag on the SiO2@α-Fe2O3 nanocomposites. The mechanism for CO oxidation on the catalyst was explored using diffuse reflectance infrared Fourier transform spectroscopy (DRFIT). The CO oxidation results for the Ag (2 wt%)-SiO2@α-Fe2O3 nanocomposite spheres showed 48% higher photocatalytic activity than α-Fe2O3 and SiO2@α-Fe2O3 at stable temperature.

In situ atomic-scale observation of oxidation and decomposition processes in nanocrystalline alloys

Oxygen contamination is a problem which inevitably occurs during severe plastic deformation of metallic powders by exposure to air. Although this contamination can change the morphology and properties of the consolidated materials, there is a lack of detailed information about the behavior of oxygen in nanocrystalline alloys. In this study, aberration-corrected high-resolution transmission electron microscopy and associated techniques are used to investigate the behavior of oxygen during in situ heating of highly strained Cu-Fe alloys. Contrary to expectations, oxide formation occurs prior to the decomposition of the metastable Cu-Fe solid solution. This oxide formation commences at relatively low temperatures, generating nanosized clusters of firstly CuO and later Fe2O3. The orientation relationship between these clusters and the matrix differs from that observed in conventional steels. These findings provide a direct observation of oxide formation in single-phase Cu-Fe composites and offer a pathway for the design of nanocrystalline materials strengthened by oxide dispersions.

Antiferromagnetic Pyrite as the Tumor Microenvironment-Mediated Nanoplatform for Self-Enhanced Tumor Imaging and Therapy

Several decades of research have identified the specific tumor microenvironment (TME) to develop promising nanotheranostics, such as pH-sensitive imaging, acidity-sensitive starving therapy, and hydrogen peroxide-activated chemotherapy, etc. Herein, a novel TME-mediated nanoplatform employing antiferromagnetic pyrite nanocubes is presented, exploiting the intratumoral, overproduced peroxide for self-enhanced magnetic resonance imaging (MRI) and photothermal therapy (PTT)/chemodynamic therapy (CDT). Through the activation of excessive peroxide in the tumor microenvironment, pyrite can lead to in situ surface oxidation and generate hydroxyl radicals to kill tumor cells (i.e., CDT). The increase of the valence state of surface Fe significantly promotes the performance of MRI accompanied by CDT. Furthermore, the localized heat by photothermal treatment can accelerate the intratumoral Fenton process, enabling a synergetic PTT/CDT. To our best knowledge, this is the first study to use the TME-response valence-variable strategy based on pyrite for developing a synergetic nanotheranostic, which will open up a new dimension for the design of other TME-based anticancer strategies.

Phase transformation from α-Fe2O3to Fe3O4and LiFeO2by the self-reduction of Fe(iii) in Prussian red in the presence of alkali hydroxides: investigation of the phase dependent morphological and magnetic properties

A simple surfactant and calcination free phase transformation from hematite to magnetite and lithium ferrite with a number of different morphologies was obtained.

Modified fractal iron oxide magnetic nanostructure: A novel and high performance platform for redox protein immobilization, direct electrochemistry and bioelectrocatalysis application

A novel biosensing platform based on fractal-pattern of iron oxides magnetic nanostructures (FIOMNs) and mixed hemi/ad-micelle of sodium dodecyl sulfate (SDS) was designed for the magnetic immobilization of hemoglobin (Hb) at a screen printed carbon electrode (SPCE). The FIOMNs was successfully synthesized through hydrothermal approach and characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). In order to provide guidelines for the mixed hemi/ad-micelle formation, zeta-potential isotherms were investigated. The construction steps of the biosensor were evaluated by electrochemical impedance spectroscopy, cyclic voltammetry and Fourier transform infrared spectroscopy. Direct electron transfer of Hb incorporated into the biocomposite film was realized with a pair of quasi-reversible redox peak at the formal potential of -0.355V vs. Ag/AgCl attributing to heme Fe(III)/Fe(II) redox couple. The results suggested that synergistic functions regarding to the hyper-branched and multidirectional structure of FIOMNs and the dual interaction ability of mixed hemi/ad-micelle array of SDS molecules not only induce an effective electron transfer between the Hb and the underlying electrode (high heterogeneous electron transfer rate constant of 2.08s(-1)) but also provide powerful and special microenvironment for the adsorption of the redox proteins. Furthermore, the biosensor displayed an excellent performance to the electrocatalytic reduction of H2O2 with a detection limit of 0.48µM and Michaelis-Menten constant (Km) value of 44.2µM. The fabricated biosensor represented the features of sensitivity, disposable design, low sample volume, rapid and simple preparation step, and acceptable anti-interferences, which offer great perspectives for the screen-determination of H2O2 in real samples.

Morphology evolution of single-crystalline hematite nanocrystals: magnetically recoverable nanocatalysts for enhanced facet-driven photoredox activity

We have developed a new green chemical approach for the shape-controlled synthesis of single-crystalline hematite nanocrystals in aqueous medium. FESEM, HRTEM and SAED techniques were used to determine the morphology and crystallographic orientations of each nanocrystal and its exposed facets. PXRD and HRTEM techniques revealed that the nanocrystals are single crystalline in nature; twins and stacking faults were not detected in these nanocrystals. The structural, vibrational, and electronic spectra of these nanocrystals were highly dependent on their shape. Different shaped hematite nanocrystals with distinct crystallographic planes have been synthesized under similar reaction conditions, which can be desired as a model for the purpose of properties comparison with the nanocrystals prepared under different reaction conditions. Here we investigated the photocatalytic performance of these different shaped-nanocrystals for methyl orange degradation in the presence of white light (λ > 420 nm). In this study, we found that the density of surface Fe(3+) ions in particular facets was the key factor for the photocatalytic activity and was higher on the bitruncated-dodecahedron shape nanocrystals by coexposed {104}, {100} and {001} facets, attributing to higher catalytic activity. The catalytic activity of different exposed facet nanocrystals were as follows: {104} + {100} + {001} (bitruncated-dodecahedron) > {101} + {001} (bitruncated-octahedron) > {001} + {110} (nanorods) > {012} (nanocuboid) which provided the direct evidence of exposed facet-driven photocatalytic activity. The nanocrystals were easily recoverable using an external magnet and reused at least six times without significant loss of its catalytic activity.

A highly sensitive non-enzymatic hydrogen peroxide and hydrazine electrochemical sensor based on 3D micro-snowflake architectures of α-Fe2O3

In the present work, well crystalline 3D micro-snowflake structured α-Fe₂O₃ has been successfully synthesized on a large scale via a simple hydrothermal reaction by hydrolysis of a K₃Fe(CN)₆ precursor.

Unconventional synthesis of Cu–Au dendritic nanowires with enhanced electrochemical activity

Cu–Au dendritic nanowires were obtained in high yield with enhanced electrochemical activity and potential application in glucose detection.

Cross-linked porous α-Fe2O3 nanorods as high performance anode materials for lithium ion batteries

Novel cross-linked porous α-Fe₂O₃ nanorods are synthesized via a hydrothermal-calcination method. They display outstanding lithium storage performance.

Shape-controlled iron oxide nanocrystals: synthesis, magnetic properties and energy conversion applications

Iron oxide nanocrystals (IONCs) with various geometric morphologies show excellent physical and chemical properties and have received extensive attention in recent years.

Alkali metal ion induced cube shaped mesoporous hematite particles for improved magnetic properties and efficient degradation of water pollutants

Alkali metal ion induced cube shaped mesoporous α-Fe₂O₃particles showed improved magnetic properties and efficient photo-Fenton degradation of methylene blue.

High-quality elliptical iron glycolate nanosheets: selective synthesis and chemical conversion into FexOy nanorings, porous nanosheets, and nanochains with enhanced visible-light photocatalytic activity

This paper describes an original and facile polyol-mediated solvothermal synthesis of elliptical iron glycolate nanosheets (IGNSs) combined with precursor thermal conversion into γ-Fe2O3 and α-Fe2O3/γ-Fe2O3 porous nanosheets (PNSs), α-Fe2O3 nanochains (NCs), and elliptical Fe3O4 nanorings (NRs). The IGNSs were produced via the oxidation-reduction and co-precipitation reactions in the presence of iron(III) salts, ethylene glycol, polyethylene glycol, and ethylenediamine. Control over Fe(3+) concentration, temperature, and time can considerably modulate the size and phase of the products. The IGNSs can be transformed to γ-Fe2O3 and α-Fe2O3/γ-Fe2O3 PNSs, α-Fe2O3 NCs, and elliptical Fe3O4 NRs by heat treatment under various annealing temperatures and ambiences. The PNSs and NCs exhibited high soft magnetic properties and coercivity, respectively. Visible-light photocatalytic activity toward RhB in the presence of H2O2 by PNSs and NCs was phase-, SBET, size-, porosity-, and local structure-dependent, following the order: α-Fe2O3 NCs > α-Fe2O3/γ-Fe2O3 PNSs > γ-Fe2O3 PNSs > IGNSs. In particular, α-Fe2O3/γ-Fe2O3 PNSs possessed significantly enhanced photocatalytic activity with good recyclability and could be conveniently separated by an applied magnetic field because of high magnetization. We believe that the as-prepared α-Fe2O3/γ-Fe2O3 PNSs have potential practical use in waste water treatment and microwave absorption.

Hierarchical Assembly of α-Fe₂O₃ Nanosheets on SnO2₂Hollow Nanospheres with Enhanced Ethanol Sensing Properties

We present the preparation of a hierarchical nanoheterostructure consisting of inner SnO2 hollow spheres (SHS) surrounded by an outer α-Fe2O3 nanosheet (FNS). Deposition of the FNS on the SHS outer surface was achieved by a facile microwave hydrothermal reaction to generate a double-shell SHS@FNS nanostructure. Such a composite with novel heterostructure acted as a sensing material for gas sensors. Significantly, the hierarchical composites exhibit excellent sensing performance toward ethanol, which is superior to the single component (SHS), mainly because of the synergistic effect and heterojunction.

Hierarchical Molybdenum Nitride Nanochexes by a Textured Self-Assembly in Gas-Solid Phase for the Enhanced Application in Lithium Ion Batteries

Self-assembly, as one kind of general phenomenon, has often been reported in solution chemistry. However, in gas-solid phase, it seldom has been disclosed. The MoN nanochex exhibits unique geometrical shape. Its body segment is composed of textured single crystal MoN nanowires, while its edges parallel to [1̅22̅] direction are attached by nanowires whose crystal orientation is different from that of the body segment. In this paper, the structure of the MoN nanochex is studied, and accordingly, a possible growth mechanism is proposed. We expect to extend this method to designed synthesis of many other functional materials, such as nitrides, carbides, and borides, and thereby to significantly tailor their resulting properties. Meanwhile, as one promising electrode material for Li-ion batteries (LIBs), MoN nanochex on Ti foil has been applied in the electrochemical energy storage, and stably delivered a specific capacity of 720 mAh/g with a remarkable Coulombic efficiency up to 98.5%, implying an achieved synergic effect derived from both mesoporous structure and the direct contact with the conducting substrate.

Sodium-Doped Mesoporous Ni2P2O7 Hexagonal Tablets for High-Performance Flexible All-Solid-State Hybrid Supercapacitors

A simple hydrothermal method has been developed to prepare hexagonal tablet precursors, which are then transformed into porous sodium-doped Ni2P2O7 hexagonal tablets by a simple calcination method. The obtained samples were evaluated as electrode materials for supercapacitors. Electrochemical measurements show that the electrode based on the porous sodium-doped Ni2P2O7 hexagonal tablets exhibits a specific capacitance of 557.7 F g(-1) at a current density of 1.2 A g(-1) . Furthermore, the porous sodium-doped Ni2P2O7 hexagonal tablets were successfully used to construct flexible solid-state hybrid supercapacitors. The device is highly flexible and achieves a maximum energy density of 23.4 Wh kg(-1) and a good cycling stability after 5000 cycles, which confirms that the porous sodium-doped Ni2P2 O7 hexagonal tablets are promising active materials for flexible supercapacitors.

Ferric Phosphate Hydroxide Microstructures Affect Their Magnetic Properties

Uniformly sized and shape-controlled nanoparticles are important due to their applications in catalysis, electrochemistry, ion exchange, molecular adsorption, and electronics. Several ferric phosphate hydroxide (Fe4(OH)3(PO4)3) microstructures were successfully prepared under hydrothermal conditions. Using controlled variations in the reaction conditions, such as reaction time, temperature, and amount of hexadecyltrimethylammonium bromide (CTAB), the crystals can be grown as almost perfect hyperbranched microcrystals at 180 °C (without CTAB) or relatively monodisperse particles at 220 °C (with CTAB). The large hyperbranched structure of Fe4(OH)3(PO4)3 with a size of ∼19 μm forms with the "fractal growth rule" and shows many branches. More importantly, the magnetic properties of these materials are directly correlated to their size and micro/nanostructure morphology. Interestingly, the blocking temperature (T B) shows a dependence on size and shape, and a smaller size resulted in a lower T B. These crystals are good examples that prove that physical and chemical properties of nano/microstructured materials are related to their structures, and the precise control of the morphology of such functional materials could allow for the control of their performance.