A Recyclable Catalytic System Based on a Temperature-Responsive Catalyst

Palladium-Catalyzed Mizoroki-Heck and Copper-Free Sonogashira Coupling Reactions in Water Using Thermoresponsive Polymer Micelles

A few kinds of thermoresponsive diblock copolymers have been synthesized and utilized for palladium-catalyzed coupling reactions in water. Poly(N-isopropylacrylamide) (PNIPAAm) and poly(N,N-diethylacrylamide) (PDEAAm) are employed for thermoresponsive segments and poly(sodium 4-styrenesulfonate) (PSSNa) and poly(sodium 2-acrylamido-methylpropanesulfonate) (PAMPSNa) are employed for hydrophilic segments. Palladium-catalyzed Mizoroki-Heck reactions are performed in water and the efficiency of the extraction process is studied. More efficient extraction was observed for the PDEAAm copolymers when compared with the PNIPAAm copolymers and conventional surfactants. In the study of the Sonogashira coupling reactions in water, aggregative precipitation of the products was observed. Washing the precipitate with water gave the product with satisfactory purity with a good yield.

Molybdenum/Tungsten-Based Heteropoly Salts in Oxidations

Oxidation represents one of the most important and practical chemical transformations for both organic synthesis, material science and pharmaceutical area. Among the existing strategies, molybdenum/tungsten-based heteropoly salts involved oxidations with low-cost and environmentally benign terminal oxidant and thus have attracted considerable attention in recent years. In this review, we have summarized the recent development of heteropoly salts utilized in oxidations, mainly the peroxomolybdates and peroxotungstates. We wish to highlight the progress made in the past 20 years of this field. Three categories are classified according to the aggregation state of metal oxides. Special attention is paid to the catalytically active peroxometalate species generated during the oxidation process. It is helpful to shed light on the common features that enable highly efficient and selective oxidations. We aim to inspire fellow chemists to explore more functional metalates for catalytic oxidations, especially asymmetric versions. Meanwhile, we attempt to understand the design principles for the discovery of more efficient, selective and economical catalytic systems.

Modulation of Self-Separating Molecular Catalysts for Highly Efficient Biomass Transformations

The energetically viable fabrication of stable and highly efficient solid acid catalysts is one of the key steps in large‐scale transformation processes of biomass resources. Herein, the covalent modification of the classical Dawson polyoxometalate (POMs) with sulfonic acids (‐SO₃H) is reported by grafting sulfonic acid groups on the POM's surface followed by oxidation of (3‐mercaptopropyl)trimethoxysilane. The acidity of TBA₆‐P₂W₁₇‐SO₃H (TBA=tetrabutyl ammonium) has been demonstrated by using ³¹P NMR spectroscopy, clearly indicating the presence of strong Brønsted acid sites. The presence of TBA counterions renders the solid acid catalyst as a promising candidate for phase transfer catalytic processes. The TBA₆‐P₂W₁₇‐SO₃H shows remarkable activity and selectivity, excellent stability, and great substrate compatibility for the esterification of free fatty acids (FFA) with methanol and conversion into biodiesel at 70 °C with >98 % conversion of oleic acid in 20 min. The excellent catalytic performance can be attributed to the formation of a catalytically active emulsion, which results in a uniform catalytic behavior during the reaction, leading to efficient interaction between the substrate and the active sites of the catalyst. Most importantly, the catalyst can be easily recovered and reused without any loss of its catalytic activity owing to its excellent phase transfer properties. This work offers an efficient and cost‐effective strategy for large‐scale biomass conversion applications.

Synthesis of Nixantphos Core-Functionalized Amphiphilic Nanoreactors and Application to Rhodium-Catalyzed Aqueous Biphasic 1-Octene Hydroformylation

A latex of amphiphilic star polymer particles, functionalized in the hydrophobic core with nixantphos and containing P(MAA-co-PEOMA) linear chains in the hydrophilic shell (nixantphos-functionalized core-crosslinked micelles, or nixantphos@CCM), has been prepared in a one-pot three-step convergent synthesis using reversible addition-fragmentation chain transfer (RAFT) polymerization in water. The synthesis involves polymerization-induced self-assembly (PISA) in the second step and chain crosslinking with di(ethylene glycol) dimethacrylate (DEGDMA) in the final step. The core consists of a functionalized polystyrene, obtained by incorporation of a new nixantphos-functionalized styrene monomer (nixantphos-styrene), which is limited to 1 mol%. The nixantphos-styrene monomer was synthesized in one step by nucleophilic substitution of the chloride of 4-chloromethylstyrene by deprotonated nixantphos in DMF at 60 °C, without interference of either phosphine attack or self-induced styrene polymerization. The polymer particles, after loading with the [Rh(acac)(CO)₂] precatalyst to yield Rh-nixantphos@CCM, function as catalytic nanoreactors under aqueous biphasic conditions for the hydroformylation of 1-octene to yield n-nonanal selectively, with no significant amounts of the branched product 2-methyl-octanal.

Soluble-Insoluble-Soluble Transitions of Thermoresponsive Cryptand-Containing Graft Copolymers

Cryptand-containing alternative copolymers were first made from copolymerization of styrenic derivatives and maleic anhydride and then chemically modified in this work by grafting methoxy poly(ethylene glycol) (MPEG) onto the maleic functional groups. These graft copolymers show interesting multistep soluble-insoluble-soluble (S-I-S) transitions in acidic aqueous media at a cloud point (T cp) and a subsequent mixing temperature (T mix). Turbidity measurements and dynamic light scattering studies indicate that such complex transitions may be attributed to the entropic contribution associated with the dehydration and aggregation of the MPEG groups and then the enthalpic contribution associated with the hydrogen bonding between ethylene glycol and carboxylic acid groups. More importantly, the phase transition temperatures and insoluble temperature ranges are very sensitive to changes in subtle hydrophobic-hydrophilic balance of the copolymers, such as the variation of pH, the cryptand size, and the length of the MPEG graft. The understanding of the S-I-S transition in relation to the structure of the copolymers and the external conditions may be useful in the design of smart materials and sensors.

Multi-modulation for self-assemblies of amphiphilic rigid-soft compounds through alteration of solution polarity and temperature

A new class of small molecule-based amphiphilic carbazole-containing compounds has been designed and synthesized. Detailed analysis of the temperature- and solvent-dependent UV-vis absorption spectra has provided insights into the cooperative self-assembly mechanism of the carbazole-containing compounds. Interestingly, the prepared amphiphilic rigid-soft compounds were also found to display a lower critical solution temperature (LCST) behavior in aqueous solution, which is relatively less explored in small molecule-based materials, leading to promising candidates for the design of a new class of thermo-responsive materials.

Dipicolylamine Functionalized Polyfluorene Based Gel with Lower Critical Solution Temperature: Preparation, Characterization, and Application

A thermoresponsive fluorescent polymer gel with lower critical solution temperature (LCST) phase transition has been prepared by cooperating conjugated fluorene homopolymer poly(2,7-(9,9-di(8-di(2-picolyl)aminooctyl))fluorene) (PPAOF) and small organic dye sulforhodamine B (SRB) or its sodium salt (SRB-Na). The sol-gel phase transition originates from the electrostatic interactions between the protonated pyridyl/amino groups in PPAOF and the sulfonic groups in the organic dye molecules, as revealed by FTIR, variable-temperature ¹H NMR spectroscopies, and cyclic voltammetry measurements. Consequently, the LCST value can be finely controlled by simply tuning the component concentrations. Moreover, due to the inefficient energy transfer, the resulting fluorescent polymer gel exhibits two independent emission bands at 440 and 577 nm, assigned to the characteristic emissions from fluorene homopolymer and organic dye, respectively. Furthermore, this fluorescent polymer gel exhibits a reversible electrofluorochromic (EFC) property with high fluorescence contrast when it is assembled in a single-layer supporting electrolyte-free EFC device. Most interestingly, different fluorescence colors can be achieved from the two electrodes of the device. Our findings may present a new way to design conjugated polymer based LCST gels and EFC materials.

Polyoxometalate-based phase transfer catalysis for liquid–solid organic reactions: a review

Recent progress in POM-based phase transfer catalysis for liquid–solid organic reactions is summarized in this review.

Pickering-emulsion inversion strategy for separating and recycling nanoparticle catalysts

With the recent advances in nanoscience and nanotechnology, more and more nanoparticle catalysts featuring high accessibility of active sites and high surface area have been explored for their use in various chemical transformations, and their rise in popularity among the catalysis community has been unprecedented. The industrial applications of these newly discovered catalysts, however, are hampered because the existing methods for separation and recycling, such as filtration and centrifugation, are generally unsuccessful. These limitations have prompted development of new methods that facilitate separation and recycling of nanoparticle catalysts, so as to meet the burgeoning demands of green and sustainable chemistry. Recently, we have found that Pickering-emulsion inversion is an appealing strategy with which to realize in situ separation and recycling of nanoparticle catalysts and thereby to establish sustainable catalytic processes. We feel that at such an early stage, this strategy, as an alternative to conventional methods, is conceptually new for readers but that it has potential to become a popular method for green catalysis. This Concept article aims to provide a timely link between previous efforts and both current and future research on nanoparticle catalysts, and is expected to facilitate further investigation into this strategy.

Polymer-based stimuli-responsive recyclable catalytic systems for organic synthesis

The introduction of stimuli-responsive polymers into the study of organic catalysis leads to the generation of a new kind of polymer-based stimuli-responsive recyclable catalytic system. Owing to their reversible switching properties in response to external stimuli, these systems are capable of improving the mass transports of reactants/products in aqueous solution, modulating the chemical reaction rates, and switching the catalytic process on and off. Furthermore, their stimuli-responsive properties facilitate the separation and recovery of the active catalysts from the reaction mixtures. As a fascinating approach of the controllable catalysis, these stimuli-responsive catalytic systems including thermoresponsive, pH-responsive, chemo-mechano-chemical, ionic strength-responsive, and dual-responsive, are reviewed in terms of their nanoreactors and mechanisms.

Dendritic phosphotungstate hybrids efficiently catalyze the selective oxidation of alcohols with H2O2

Dendritic phosphotungstate hybrids are highly efficient and recyclable catalysts for the selective oxidation of alcohols with H₂O₂.

Development and application of new oxidation systems utilizing oxometalate catalysts

This review describes our recent efforts in the development and application of new oxidation systems utilizing oxometalate catalysts. The novel use of heteropoly acid (HPA), an acidic oxometalate catalyst, in hypervalent iodine-mediated oxidations provided an effective strategy to generate cation radical species that enables a variety of direct C-H functionalizations of aromatic compounds. This strategy brought a facile biaryl synthesis and new spirodienone syntheses in aromatic oxidation chemistry. Moreover, this strategy opens up a facile synthetic route to morphinandienone alkaloids. On the other hand, the use of oxometalate catalyst together with poly(N-isopropylacrylamide) (PNIPAAm)-based polymer in the development of new solid-phase catalyst provided a novel reaction system in water. Due to the characteristic temperature-responsive intelligence of PNIPAAm, this reaction system brought a remarkable acceleration of the reactivity and ease of catalyst recovering in catalytic oxidation that uses hydrogen peroxide or oxygen gas (O<inf>2</inf>) as primary oxidant. In addition, the recovered solid-phase catalyst could be used for consecutive reactions without any significant loss of its catalytic efficacy.

Influence of lipid membrane rigidity on properties of supporting polymer

Temperature-sensitive hydrogel polymers are utilized as responsive layers in various applications. Although the polymer's native characteristics have been studied extensively, details concerning its properties during interaction with biorelated structures are lacking. This work investigates the interaction between a thermoresponsive polymer cushion and different lipid membrane capping layers probed by neutron reflectometry. N-isopropylacrylamide copolymerized with methacroylbenzophenone first supported a lipid bilayer composed of 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) and subsequently 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). The polymer-membrane systems were investigated above and below the polymer transition temperature (37 and 25°C). Although the same cushion supported each lipid membrane, the polymer hydration profile and thickness were markedly different for DPPE and DPPC systems. Because DPPE and DPPC have different bending rigidities, these results establish that the polymer-membrane interaction is critically mediated by the mechanics of the membrane, providing better insight into cell-hydrogel interactions.