Diels–Alder Reactions Are Faster in Water than in Ionic Liquids at Room Temperature

Click chemistry in the synthesis of antibody-drug conjugates

Antibody-Drug Conjugates (ADC) are a new class of anticancer therapeutics with immense potential. They have been rapidly advancing in the last two decades. This fast speed of development has become possible due to several new technologies and methods. One of them is Click Chemistry, an approach that was created only two decades ago, but already is actively utilized for bioconjugation, material science and drug discovery. In this review, we researched the impact of Click Chemistry reactions on the synthesis and development of ADCs. The information about the most frequently utilized reactions, such as Michael's addition, Copper-catalyzed azide-alkyne [3+2] cycloaddition (CuAAC), Strain-promoted azide-alkyne [3+2] cycloaddition (SPAAC), oxime bond formation, hydrazine-iso-Pictet-Spengler Ligation (HIPS), Diels-Alder reactions have been summarized. The implementation of thiol-maleimide Click Chemistry reaction in the synthesis of numerous FDA-approved Antibody-Drug Conjugates has been reported. The data amassed in the present review provides better understanding of the importance of Click Chemistry in the synthesis, development and improvement of the Antibody-Drug Conjugates and it will be helpful for further researches related to ADCs.

Effect of Novel Deep Eutectic Solvents on the Endo/Exo Ratio of Diels-Alder Reactions at Room Temperature

The Diels-Alder reaction is a prototypical example of a thermally allowed [4 + 2] cycloaddition with good control over the regio- and stereochemical outcomes. Therefore, Diels-Alder reactions in which adjacent stereocenters are generated at the two ends of the newly formed single bonds imply two different possible stereochemical outcomes. In cases where the dienophile has a single electron-withdrawing substituent, the outcome can often be predicted by applying the known "endo rule". Furthermore, the use of chiral eutectic solvents in asymmetric synthesis has become a novel tool to maintain sustainability in organic synthesis. In the present work, a set of recyclable and sustainable bio-based deep eutectic solvents (DESs) was designed using hydrogen bond acceptors (HBAs) with a chiral center. These compounds were used in their racemic and enantiomerically enriched forms to prepare DESs with lactic acid (LA), glycerol (Gly), and ethylene glycol, which act as hydrogen bond donors (HBDs) in the corresponding eutectic mixture. These DESs were used as solvents to study the reaction between cyclopentadiene and ethyl acrylate or butyl acrylate in typical [4 + 2] cycloadditions. The best yields and endo-selectivity were achieved using LA as the HBD in the eutectic mixtures. The results and adduct ratios obtained show that these DESs were able to improve both reaction yields and selectivity when compared to those observed in organic solvents or ionic liquids. Moreover, the reaction products (adducts) were easily recovered with diethyl ether from the reaction mixture, where they appeared as an upper layer.

The Electric Field Responses of Inorganic Ionogels and Poly(ionic liquid)s

Ionic liquids (ILs) are a class of pure ions with melting points lower than 100 °C. They are getting more and more attention because of their high thermal stability, high ionic conductivity and dielectric properties. The unique dielectric properties aroused by the ion motion of ILs makes ILs-contained inorganics or organics responsive to electric field and have great application potential in smart electrorheological (ER) fluids which can be used as the electro-mechanical interface in engineering devices. In this review, we summarized the recent work of various kinds of ILs-contained inorganic ionogels and poly(ionic liquid)s (PILs) as ER materials including their synthesis methods, ER responses and dielectric analysis. The aim of this work is to highlight the advantage of ILs in the synthesis of dielectric materials and their effects in improving ER responses of the materials in a wide temperature range. It is expected to provide valuable suggestions for the development of ILs-contained inorganics and PILs as electric field responsive materials.

Accurate Diels-Alder Energies and Endo Selectivity in Ionic Liquids Using the OPLS-VSIL Force Field

Our recently developed optimized potentials for liquid simulations-virtual site ionic liquid (OPLS-VSIL) force field has been shown to provide accurate bulk phase properties and local ion-ion interactions for a wide variety of imidazolium-based ionic liquids. The force field features a virtual site that offloads negative charge to inside the plane of the ring with careful attention given to hydrogen bonding interactions. In this study, the Diels-Alder reaction between cyclopentadiene and methyl acrylate was computationally investigated in the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF₆], as a basis for the validation of the OPLS-VSIL to properly reproduce a reaction medium environment. Mixed ab initio quantum mechanics and molecular mechanics (QM/MM) calculations coupled to free energy perturbation and Monte Carlo sampling (FEP/MC) that utilized M06-2X/6-31G(d) and OPLS-VSIL gave activation free energy barriers of 14.9 and 16.0 kcal/mol for the endo-cis and exo-cis Diels-Alder reaction pathways, respectively (exptl. ΔH^‡ of 14.6 kcal/mol). The endo selectivity trend was correctly predicted with a calculated 73% endo preference. The rate and selectivity enhancements present in the endo conformation were found to arise from preferential hydrogen bonding with the exposed C4 ring hydrogen on the BMIM cation. Weaker electronic stabilization of the exo transition state was predicted. For comparison, our earlier ±0.8 charge-scaled OPLS-2009IL force field also yielded a ΔG^‡ of 14.9 kcal/mol for the favorable endo reaction pathway but did not adequately capture the highly organized solvent interactions present between the cation and Diels-Alder transition state.

Thermodynamic and molecular origin of interfacial rate enhancements and endo-selectivities of a Diels-Alder reaction

Organic reactions in general display large rate accelerations when performed under interfacial conditions, such as on water or at ionic liquid interfaces. However, a clear picture of the physicochemical factors responsible for this large rate enhancements is not available. To gain an understanding of the thermodynamic and molecular origin of these large rate enhancements, we performed a Diels-Alder reaction between cyclopentadiene and methyl acrylate at ionic liquid/n-hexane interfaces. This study describes, for the first time, a methodology for the calculation of the activation parameters of an interfacial reaction. It has been seen that the energy of activation for an interfacial reaction is much smaller than that of the corresponding homogeneous reaction, resulting into the large rate acceleration for the interfacial reaction. Furthermore, the study describes the effects of the alkyl chain length of ionic liquid cations, the extent of heterogeneity, and the polarity of ionic liquids on the rate constants and stereoselectivity of the reaction.

Ionic liquid solvents: the importance of microscopic interactions in predicting organic reaction outcomes

Ionic liquids are attractive alternatives to molecular solvents as they have many favourable physical properties and can produce different organic reaction outcomes compared to molecular solvents. Thus far, interactions between the ionic liquid components and specific sites (such as charged centres, lone pairs and π systems) on the reagents and transition state have been identified as affecting reaction outcome; a comprehensive understanding of these interactions is necessary to allow prediction of ionic liquid solvent effects. This manuscript summarises our recent progress in the development of a framework for predicting the effect of an ionic liquid solvent on the outcome of organic processes. There will be a particular focus on the importance of the different interactions between the ionic liquid components and the species along the reaction coordinate that are responsible for the changes in reaction outcome observed in the cases described.

Plasmonic behavior of ionic liquid stabilized gold nanoparticles in molecular solvents

In this paper, we have demonstrated the facile synthesis of stable gold nanoparticles (AuNPs) using imidazolium ionic liquids (ImILs) as a stabilizer as well as a surfactant and their surface plasmon resonance (SPR) in different molecular solvents with varying dielectric properties.

Understanding positive and negative deviations in polarity of ionic liquid mixtures by pseudo-solvent approach

Physico-chemical properties of liquid mixtures in general display large deviations from linear behaviour, arising out of complex specific and non-specific intermolecular interactions. The polarity of liquid mixtures displaying large positive and negative deviations can be minimized and linear mixing can be achieved in liquids using a pseudo-solvent methodology. The work described herein is designed to investigate the influence of different physical parameters on the linear pseudo-solvent composition in ionic liquid mixtures. For this purpose, we have determined the deviations from linearity, ΔE values (defined as given by ) for binary mixtures of a variety of ionic liquids, including two molecular solvents, DMSO and formamide. Firstly, the investigations were carried out in three 1-butyl-3-methylimidazolium cation based aprotic ionic liquids and the roles of anionic structure and hydrogen bond acceptor basicities (β values) of the ionic liquids were determined. The influence of the cationic structure, i.e., the hydrogen bond donor acidity (α values) and non-associative nature of the ionic liquids, was determined using C2-methylated analogs, 1-butyl-2,3-dimethylimidazolium cation based ionic liquids. The role of the protic nature of ionic liquids was studied in two protic ionic liquids, viz., 1-methylimidazolium formate and 1-methylimidazolium acetate. The effects of the temperature, pseudo-solvent structure and solvatochromic probe structure on the ΔE values were also explored.

Enhancement of mass transfer through bubbling effect during extraction and reaction in biphasic systems containing ionic liquid

An improved interface mass transfer during an extraction or biphasic reaction was realized by creating a bubbling effect in a biphasic system containing an ionic liquid.

Ionic liquid binary mixtures: how different factors contribute to determine their effect on the reactivity

We studied how mixing ionic liquids affected the rate of the Diels Alder reaction between 9-anthracenemethanol and N-ethylmaleimide.

Kinetic and mechanistic investigations of the Baylis–Hillman reaction in ionic liquids

We report here a quantitative study of the kinetics and mechanism of the Baylis–Hillman reaction in the presence of ionic liquids as solvent media.

Computational approaches to understanding reaction outcomes of organic processes in ionic liquids

The utility of using a combined experimental and computational approach for understanding ionic liquid media, and their effect on reaction outcome, is highlighted through a number of case studies.

Synthesis of 1-carbamatoalkyl-2-naphthols in Tween® 20 Aqueous Micelles

A facile and efficient procedure for the preparation of 1-carbamatoalkyl-2-naphthols by a one-pot multi-component reaction of 2-naphthol, aldehydes and carbamates is described. The procedure is carried out under neutral conditions at 75–80 °C in an aqueous medium catalysed by the non-ionic surfactant Tween® A loading of 20. 5 wt% of the catalyst was optimal. After the reaction, the catalyst could be simply recovered and reused directly without any further treatment. Product yields were slightly decreased after six cycles. The effect of some common solvents other than water on the reaction was explored besides the water. The generality of this multi-component condensation reaction was evaluated with various aldehydes and carbamates under the optimised conditions.

Probing the mechanism of Baylis-Hillman reaction in ionic liquids

The kinetic data for a Baylis-Hillman reaction in certain ionic liquids possessing ethylsulfate anion [EtSO(4)](-) demonstrate that the rate determining step (RDS) is second order in aldehyde, but first order in acrylate and DABCO. This observation is similar to the one made by McQuade et al., who carried out this reaction in an aprotic polar solvent like DMSO. However, this is in contrast to the general observation that RDS is first order in aldehyde, acrylate, and DABCO in organic solvents.

Direct synthesis of biodegradable polysaccharide derivative hydrogels through aqueous Diels-Alder chemistry

A robust synthetic strategy where polysaccharide derivative precursors react through aqueous Diels-Alder chemistry without the involvement of catalysts and coupling reagents, allowing for the direct encapsulation of positive and negative proteins within biodegradable hydrogels. The results demonstrated that the aqueous Diels-Alder chemistry provides an extremely selective reaction and proceeds with high efficiency for polysaccharide bioconjugation. This synthetic approach uniquely allows for the direct fabrication of biologically functionalized gels with ideal structures, which provides a competitive alternative to conventional conjugation techniques such as click chemistry.