Deoxyribozyme-Catalyzed Labeling of RNA

Efficient post-synthesis incorporation and conjugation of reactive ketones in RNA via 2'-acylation

Despite the broad utility of ketones in bioconjugation, few methods exist to introduce them into RNA. Here we develop highly reactive 2'-OH acylating reagents containing strained-ring ketones, and employ them as versatile labeling handles for RNA.

Total RNA Synthesis and its Covalent Labeling Innovation

RNA plays critical roles in a wide range of physiological processes. For example, it is well known that RNA plays an important role in regulating gene expression, cell proliferation, and differentiation, and many other chemical and biological processes. However, the research community still suffers from limited approaches that can be applied to readily visualize a specific RNA-of-interest (ROI). Several methods can be used to track RNAs; these rely mainly on biological properties, namely, hybridization, aptamer, reporter protein, and protein binding. With respect to covalent approaches, very few cases have been reported. Happily, several new methods for efficient labeling studies of ROIs have been demonstrated successfully in recent years. Additionally, methods employed for the detection of ROIs by RNA modifying enzymes have also proved feasible. Several approaches, namely, phosphoramidite chemistry, in vitro transcription reactions, co-transcription reactions, chemical post-modification, RNA modifying enzymes, ligation, and other methods targeted at RNA labeling have been revealed in the past decades. To illustrate the most recent achievements, this review aims to summarize the most recent research in the field of synthesis of RNAs-of-interest bearing a variety of unnatural nucleosides, the subsequent RNA labeling research via biocompatible ligation, and beyond.

Chemical Dual End-Labeling of Large Ribozymes

Fast and efficient site-specific labeling of long RNAs is one of the main bottlenecks limiting distance measurements by means of Förster resonance energy transfer (FRET) or electron paramagnetic resonance (EPR) spectroscopy. Here, we present an optimized protocol for dual end-labeling with different fluorophores at the same time meeting the restrictions of highly labile and degradation-sensitive RNAs. We describe in detail the dual-labeling of a catalytically active wild-type group II intron as a typical representative of long functional RNAs. The modular procedure chemically activates the 5'-phosphate and the 3'-ribose for bioconjugation with a pair of fluorophores, as shown herein, or with spin labels. The mild reaction conditions preserve the structural and functional integrity of the biomacromolecule and results in covalent, dual-labeled RNA in its pre-catalytic state in yields suitable for both ensemble and single-molecule FRET experiments.

Solution NMR Spectroscopy as a Tool to Study DNAzyme Structure and Function

Catalytically active DNA oligomers (or DNAzymes) offer a broad spectrum of functions as well as applications. Although known for over two decades, the DNAzyme's mode-of-actions are still poorly understood, mainly due to lack of high-resolution structural insights. Due to their molecular size, structural flexibility, and dynamic interactions with metal-ion cofactors, solution nuclear magnetic resonance spectroscopy (NMR) can serve as optimal tool to obtain mechanistic insights of DNAzymes. In this respect, nearly all states of the DNAzyme and its substrate during the catalytic cycle are accessible. The instructions and protocols provided in the following may assist the initial steps of an NMR-based characterization of DNAzymes. To reduce the initial setup requirements and foster exciting new research projects, the discussed approaches focus on experiments that do not require cost-intensive isotope labeling strategies.

Strategies for Covalent Labeling of Long RNAs

The introduction of chemical modifications into long RNA molecules at specific positions for visualization, biophysical investigations, diagnostic and therapeutic applications still remains challenging. In this review, we present recent approaches for covalent internal labeling of long RNAs. Topics included are the assembly of large modified RNAs via enzymatic ligation of short synthetic oligonucleotides and synthetic biology approaches preparing site-specifically modified RNAs via in vitro transcription using an expanded genetic alphabet. Moreover, recent approaches to employ deoxyribozymes (DNAzymes) and ribozymes for RNA labeling and RNA methyltransferase based labeling strategies are presented. We discuss the potentials and limits of the individual methods, their applicability for RNAs with several hundred to thousands of nucleotides in length and indicate future directions in the field.

Site-Specific Dual-Color Labeling of Long RNAs

Labeling of large RNAs with reporting entities, e.g., fluorophores, has significant impact on RNA studies in vitro and in vivo. Here, we describe a minimally invasive RNA labeling method featuring nucleotide and position selectivity, which solves the long-standing challenge of how to achieve accurate site-specific labeling of large RNAs with a least possible influence on folding and/or function. We use a custom-designed reactive DNA strand to hybridize to the RNA and transfer the alkyne group onto the targeted adenine or cytosine. Simultaneously, the 3'-terminus of RNA is converted to a dialdehyde moiety under the experimental condition applied. The incorporated functionalities at the internal and the 3'-terminal sites can then be conjugated with reporting entities via bioorthogonal chemistry. This method is particularly valuable for, but not limited to, single-molecule fluorescence applications. We demonstrate the method on an RNA construct of 275 nucleotides, the btuB riboswitch of Escherichia coli.

FRET-based dynamic structural biology: Challenges, perspectives and an appeal for open-science practices

Single-molecule FRET (smFRET) has become a mainstream technique for studying biomolecular structural dynamics. The rapid and wide adoption of smFRET experiments by an ever-increasing number of groups has generated significant progress in sample preparation, measurement procedures, data analysis, algorithms and documentation. Several labs that employ smFRET approaches have joined forces to inform the smFRET community about streamlining how to perform experiments and analyze results for obtaining quantitative information on biomolecular structure and dynamics. The recent efforts include blind tests to assess the accuracy and the precision of smFRET experiments among different labs using various procedures. These multi-lab studies have led to the development of smFRET procedures and documentation, which are important when submitting entries into the archiving system for integrative structure models, PDB-Dev. This position paper describes the current 'state of the art' from different perspectives, points to unresolved methodological issues for quantitative structural studies, provides a set of 'soft recommendations' about which an emerging consensus exists, and lists openly available resources for newcomers and seasoned practitioners. To make further progress, we strongly encourage 'open science' practices.

Covalent labeling of nucleic acids

Labeling of nucleic acids is required for many studies aiming to elucidate their functions and dynamics in vitro and in cells. Out of the numerous labeling concepts that have been devised, covalent labeling provides the most stable linkage, an unrivaled choice of small and highly fluorescent labels and - thanks to recent advances in click chemistry - an incredible versatility. Depending on the approach, site-, sequence- and cell-specificity can be achieved. DNA and RNA labeling are rapidly developing fields that bring together multiple areas of research: on the one hand, synthetic and biophysical chemists develop new fluorescent labels and isomorphic nucleobases as well as faster and more selective bioorthogonal reactions. On the other hand, the number of enzymes that can be harnessed for post-synthetic and site-specific labeling of nucleic acids has increased significantly. Together with protein engineering and genetic manipulation of cells, intracellular and cell-specific labeling has become possible. In this review, we provide a structured overview of covalent labeling approaches for nucleic acids and highlight notable developments, in particular recent examples. The majority of this review will focus on fluorescent labeling; however, the principles can often be readily applied to other labels. We will start with entirely chemical approaches, followed by chemo-enzymatic strategies and ribozymes, and finish with metabolic labeling of nucleic acids. Each section is subdivided into direct (or one-step) and two-step labeling approaches and will start with DNA before treating RNA.

Site-Selective RNA Functionalization via DNA-Induced Structure

Methods for RNA functionalization at specific sites are in high demand but remain a challenge, particularly for RNAs produced by transcription rather than by total synthesis. Recent studies have described acylimidazole reagents that react in high yields at 2'-OH groups stochastically at nonbase-paired regions, covering much of the RNA in scattered acyl esters. Localized reactions, if possible, could prove useful in many applications, providing functional handles at specific sites and sequences of the biopolymer. Here, we describe a DNA-directed strategy for in vitro functionalization of RNA at site-localized 2'-OH groups. The method, RNA Acylation at Induced Loops (RAIL), utilizes complementary helper DNA oligonucleotides that expose gaps or loops at selected positions while protecting the remainder in DNA-RNA duplexes. Reaction with an acylimidazole reagent is then carried out, providing high yields of 2'-OH conjugation at predetermined sites. Experiments reveal optimal helper oligodeoxynucleotide designs and conditions for the reaction, and tests of the approach are carried out to control localized ribozyme activities and to label RNAs with dual-color fluorescent dyes. The RAIL approach offers a simple and novel strategy for site-selective labeling and control of RNAs, potentially of any length and origin.

Fundamental studies of functional nucleic acids: aptamers, riboswitches, ribozymes and DNAzymes

This review aims at juxtaposing common versus distinct structural and functional strategies that are applied by aptamers, riboswitches, and ribozymes/DNAzymes. Focusing on recently discovered systems, we begin our analysis with small-molecule binding aptamers, with emphasis on in vitro-selected fluorogenic RNA aptamers and their different modes of ligand binding and fluorescence activation. Fundamental insights are much needed to advance RNA imaging probes for detection of exo- and endogenous RNA and for RNA process tracking. Secondly, we discuss the latest gene expression-regulating mRNA riboswitches that respond to the alarmone ppGpp, to PRPP, to NAD⁺, to adenosine and cytidine diphosphates, and to precursors of thiamine biosynthesis (HMP-PP), and we outline new subclasses of SAM and tetrahydrofolate-binding RNA regulators. Many riboswitches bind protein enzyme cofactors that, in principle, can catalyse a chemical reaction. For RNA, however, only one system (glmS ribozyme) has been identified in Nature thus far that utilizes a small molecule - glucosamine-6-phosphate - to participate directly in reaction catalysis (phosphodiester cleavage). We wonder why that is the case and what is to be done to reveal such likely existing cellular activities that could be more diverse than currently imagined. Thirdly, this brings us to the four latest small nucleolytic ribozymes termed twister, twister-sister, pistol, and hatchet as well as to in vitro selected DNA and RNA enzymes that promote new chemistry, mainly by exploiting their ability for RNA labelling and nucleoside modification recognition. Enormous progress in understanding the strategies of nucleic acids catalysts has been made by providing thorough structural fundaments (e.g. first structure of a DNAzyme, structures of ribozyme transition state mimics) in combination with functional assays and atomic mutagenesis.

DMLR: A toolkit for investigation of deoxyribozyme-mediated ligation based on real time PCR

Deoxyribozymes or DNAzyme are identified as catalytic DNA sequences which catalyze different chemical reactions. Ligating deoxyribozymes catalyze the formation of branched and linear products. Due to the lack of efficient read-out systems, there is no report on in vivo application of ligating deoxyribozymes. To expand the biological application of branched-RNA forming deoxyribozymes, we performed our study in order to suggest a practical toolkit for measurement of in vivo real-time activity of ligating deoxyribozymes. Further in vitro studies were designed to analyze the effects of the location of branch site on reverse transcriptase (RT) interference. With this toolkit even the activity of RT was measured precisely. Our results indicate that the activity of RT enzyme significantly affected by a 17 nt branched adaptor synthesized by 10DM24 ligating deoxyribozyme. The RT stalls at or near the RNA branch point during both initiation and elongation phases. The DNA synthesis is decreased 4.3 and 2.7 fold during initiation and elongation phases respectively. In conclusion, we introduce a general and practical toolkit called "DMLR" which is based on Real-time PCR method. The use of DMLR precisely determines RT behavior when encountered with any backbone modification with the ability of stopping the enzyme activity.

Direct in Vitro Selection of Trans-Acting Ribozymes for Posttranscriptional, Site-Specific, and Covalent Fluorescent Labeling of RNA

General and efficient tools for site-specific fluorescent or bioorthogonal labeling of RNA are in high demand. Here, we report direct in vitro selection, characterization, and application of versatile trans-acting 2'-5' adenylyl transferase ribozymes for covalent and site-specific RNA labeling. The design of our partially structured RNA pool allowed for in vitro evolution of ribozymes that modify a predetermined nucleotide in cis (i.e., intramolecular reaction) and can then be easily engineered for applications in trans (i.e., in an intermolecular setup). The resulting ribozymes are readily designed for specific target sites in small and large RNAs and accept a wide variety of N⁶-modified ATP analogues as small-molecule substrates. The most efficient new ribozyme (FH14) shows excellent specificity toward its target sequence also in the context of total cellular RNA.

Chemo-enzymatic treatment of RNA to facilitate analyses

Labeling RNA is a recurring problem to make RNA compatible with state-of-the-art methodology and comes in many flavors. Considering only cellular applications, the spectrum still ranges from site-specific labeling of individual transcripts, for example, for live-cell imaging of mRNA trafficking, to metabolic labeling in combination with next generation sequencing to capture dynamic aspects of RNA metabolism on a transcriptome-wide scale. Combining the specificity of RNA-modifying enzymes with non-natural substrates has emerged as a valuable strategy to modify RNA site- or sequence-specifically with functional groups suitable for subsequent bioorthogonal reactions and thus label RNA with reporter moieties such as affinity or fluorescent tags. In this review article, we will cover chemo-enzymatic approaches (a) for in vitro labeling of RNA for application in cells, (b) for treatment of total RNA, and (c) for metabolic labeling of RNA. This article is categorized under: RNA Processing < RNA Editing and Modification RNA Methods < RNA Analyses in vitro and In Silico RNA Methods < RNA Analyses in Cells.

Site-specific dual-color labeling of long RNAs for single-molecule spectroscopy

Labeling of long RNA molecules in a site-specific yet generally applicable manner is integral to many spectroscopic applications. Here we present a novel covalent labeling approach that is site-specific and scalable to long intricately folded RNAs. In this approach, a custom-designed DNA strand that hybridizes to the RNA guides a reactive group to target a preselected adenine residue. The functionalized nucleotide along with the concomitantly oxidized 3'-terminus can subsequently be conjugated to two different fluorophores via bio-orthogonal chemistry. We validate this modular labeling platform using a regulatory RNA of 275 nucleotides, the btuB riboswitch of Escherichia coli, demonstrate its general applicability by modifying a base within a duplex, and show its site-selectivity in targeting a pair of adjacent adenines. Native folding and function of the RNA is confirmed on the single-molecule level by using FRET as a sensor to visualize and characterize the conformational equilibrium of the riboswitch upon binding of its cofactor adenosylcobalamin. The presented labeling strategy overcomes size and site constraints that have hampered routine production of labeled RNA that are beyond 200 nt in length.

Theoretical Modeling of Viscosity Monitoring with Vibrating Resonance Energy Transfer for Point-of-Care and Environmental Monitoring Applications

Förster resonance energy transfer (FRET) between two molecules in nanoscale distances is utilized in significant number of applications including biological and chemical applications, monitoring cellular activities, sensors, wireless communications and recently in nanoscale microfluidic radar design denoted by the vibrating FRET (VFRET) exploiting hybrid resonating graphene membrane and FRET design. In this article, a low hardware complexity and novel microfluidic viscosity monitoring system architecture is presented by exploiting VFRET in a novel microfluidic system design. The donor molecules in a microfluidic channel are acoustically vibrated resulting in VFRET in the case of nearby acceptor molecules detected with their periodic optical emission signals. VFRET does not require complicated hardware by directly utilizing molecular interactions detected with the conventional photodetectors. The proposed viscosity measurement system design is theoretically modeled and numerically simulated while the experimental challenges are discussed. It promises point-of-care and environmental monitoring applications including viscosity characterization of blood or polluted water.

3'-End labeling of nucleic acids by a polymerase ribozyme

A polymerase ribozyme can be used to label the 3' end of RNA or DNA molecules by incorporating a variety of functionalized nucleotide analogs. Guided by a complementary template, the ribozyme adds a single nucleotide that may contain a fluorophore, biotin, azide or alkyne moiety, thus enabling the detection and/or capture of selectively labeled materials. Employing a variety of commercially available nucleotide analogs, efficient labeling was demonstrated for model RNAs and DNAs, human microRNAs and natural tRNA.

Sequence-Specific Post-Synthetic Oligonucleotide Labeling for Single-Molecule Fluorescence Applications

The sequence-specific fluorescence labeling of nucleic acids is a prerequisite for various methods including single-molecule Förster resonance energy transfer (smFRET) for the detailed study of nucleic acid folding and function. Such nucleic acid derivatives are commonly obtained by solid-phase methods; however, yields decrease rapidly with increasing length and restrict the practicability of this approach for long strands. Here, we report a new labeling strategy for the postsynthetic incorporation of a bioorthogonal group into single stranded regions of both DNA and RNA of unrestricted length. A 12-alkyne-etheno-adenine modification is sequence-selectively formed using DNA-templated synthesis, followed by conjugation of the fluorophore Cy3 via a copper-catalyzed azide-alkyne cycloaddition (CuAAC). Evaluation of the labeled strands in smFRET measurements shows that the strategy developed here has the potential to be used for the study of long functional nucleic acids by (single-molecule) fluorescence or other methods. To prove the universal use of the method, its application was successfully extended to the labeling of a short RNA single strand. As a proof-of-concept, also the labeling of a large RNA molecule in form of a 633 nucleotide long construct derived from the Saccharomyces cerevisiae group II intron Sc.ai5γ was performed, and covalent attachment of the Cy3 fluorophore was shown with gel electrophoresis.

Catalytic DNA: Scope, Applications, and Biochemistry of Deoxyribozymes

The discovery of natural RNA enzymes (ribozymes) prompted the pursuit of artificial DNA enzymes (deoxyribozymes) by in vitro selection methods. A key motivation is the conceptual and practical advantages of DNA relative to proteins and RNA. Early studies focused on RNA-cleaving deoxyribozymes, and more recent experiments have expanded the breadth of catalytic DNA to many other reactions. Including modified nucleotides has the potential to widen the scope of DNA enzymes even further. Practical applications of deoxyribozymes include their use as sensors for metal ions and small molecules. Structural studies of deoxyribozymes are only now beginning; mechanistic experiments will surely follow. Following the first report 21 years ago, the field of deoxyribozymes has promise for both fundamental and applied advances in chemistry, biology, and other disciplines.

Proximal disruptor aided ligation (ProDAL) of kilobase-long RNAs

RNA with site-specific modification is a useful tool for RNA biology studies. However, generating kilobase (kb) -long RNA with internal modification at a site distant from RNA termini remains challenging. Here we report an enhanced splint ligation technique, proximal disruptor aided ligation (ProDAL), which allows adequate efficiency toward this purpose. The key to our approach is using multiple DNA oligonucleotides, 'proximal disruptors', to target the RNA substrate sequence next to the ligation site. The binding of disruptors helps to free the ligation site from intramolecular RNA basepairing, and consequently promotes more efficient formation of the pre-ligation complex and a higher overall ligation yield. We used naturally occurring 1.0 kb renilla and 1.9 kb firefly luciferase mRNA sequences to test the efficacy of our approach. ProDAL yielded 9-14% efficiency for the ligation between two RNA substrates, both of which were between 414 and 1313 nucleotides (nt) long. ProDAL also allowed similarly high efficiency for generating kb-long RNA with site-specific internal modification by a simple three-part ligation between two long RNA substrates and a modification-carrying RNA oligonucleotide. In comparison, classical splint ligation yielded a significantly lower efficiency of 0-2% in all cases. We expect that ProDAL will benefit studies involving kb-long RNAs, including translation, long non-coding RNAs, RNA splicing and modification, and large ribonucleoprotein complexes.

Enhanced deoxyribozyme-catalyzed RNA ligation in the presence of organic cosolvents

Deoxyribozyme and aptamer selections are typically conducted in aqueous buffer solutions. Using nonaqueous cosolvents in selection experiments will help expand the activity of deoxyribozymes with non-oligonucleotide substrates and will allow identification of new aptamers for nonprotein targets. We undertook in vitro selections utilizing a small amount of methanol in the reaction to keep the herbicides alachlor and atrazine in solution with the goal of identifying deoxyribozymes that require these herbicides for activity. The resulting deoxyribozymes successfully catalyze RNA ligation, but do not require alachlor or atrazine. Surprisingly, some of these deoxyribozymes displayed better catalytic activity in the presence of methanol over just aqueous buffer. We investigated several organic cosolvents to see if this enhancement was limited to methanol and found that other cosolvents, including ethanol, DMSO, and DMF, supported activity; in some cases, greater enhancement was observed. On the basis of these results, we tested two other previously identified RNA-ligating deoxyribozymes to assess their tolerance of cosolvents and determined that different deoxyribozymes showed different responses to the cosolvents. Our results demonstrate that deoxyribozymes can tolerate and, in some cases, display enhanced activity in alternative solvent conditions. These findings will facilitate the development of responsive deoxyribozyme systems utilizing components with limited water solubility.

An Efficient Lanthanide-Dependent DNAzyme Cleaving 2'-5'-Linked RNA

RNA can form two types of linkage. In addition to the predominant 3'-5' linkage, 2'-5'-linked RNA is also important in biology, medicine, and prebiotic studies. Here, in vitro selection was used to isolate a DNAzyme that specifically cleaves 2'-5' RNA by using Ce(3+) as the metal cofactor, but leaves the 3'-5' counterpart intact. This Ce5 DNAzyme requires trivalent light lanthanide ions and shows a rate of 0.16 min(-1) in the presence of 10 μm Ce(3+) ; the activity decreases with heavier lanthanide ions. This is the fastest DNAzyme reported for this reaction, and it might enable applications in chemical biology. As a proof-of-concept, using this DNAzyme, the reactions between phosphorothioate-modified RNA and strongly thiophilic metals (Hg(2+) and Tl(3+) ) were studied as a function of pH.

DNA Catalysis: The Chemical Repertoire of DNAzymes

Deoxyribozymes or DNAzymes are single-stranded catalytic DNA molecules that are obtained by combinatorial in vitro selection methods. Initially conceived to function as gene silencing agents, the scope of DNAzymes has rapidly expanded into diverse fields, including biosensing, diagnostics, logic gate operations, and the development of novel synthetic and biological tools. In this review, an overview of all the different chemical reactions catalyzed by DNAzymes is given with an emphasis on RNA cleavage and the use of non-nucleosidic substrates. The use of modified nucleoside triphosphates (dN*TPs) to expand the chemical space to be explored in selection experiments and ultimately to generate DNAzymes with an expanded chemical repertoire is also highlighted.

Catalysts for RNA and DNA modification

To study DNAs and RNAs it is often necessary to chemically modify them. Nature's strategy for nucleic acid modification is to use selective catalysts, and chemists have begun to emulate this conceptual approach. In this review we present a summary of catalytic approaches toward the construction of modified RNAs and DNAs and outline our opinions on where new research is needed.

Mg2+-dependent conformational changes and product release during DNA-catalyzed RNA ligation monitored by Bimane fluorescence

Among the deoxyribozymes catalyzing the ligation of two RNA substrates, 7S11 generates a branched RNA containing a 2',5'-linkage. We have attached the small fluorogenic probe Bimane to the triphosphate terminated RNA substrate and utilized emission intensity and anisotropy to follow structural rearrangements leading to a catalytically active complex upon addition of Mg(2+). Bimane coupled to synthetic oligonucleotides is quenched by nearby guanines via photoinduced electron transfer. The degree of quenching is sensitive to changes in the base pairing of the residues involved and in their distances to the probe. These phenomena permit the characterization of various sequential processes in the assembly and function of 7S11: binding of Mg(2+) to the triphosphate moiety, release of quenching of the probe by the 5'-terminal G residues of R-RNA as they engage in secondary base-pair interactions, local rearrangement into a distinct active conformation, and continuous release of the Bimane-labeled pyrophosphate during the course of reaction at 37°C. It was possible to assign equilibrium and rate constants and structural interpretations to the sequence of conformational transitions and catalysis, information useful for optimizing the design of next generation deoxyribozymes. The fluorescent signatures, thermodynamic equilibria and catalytic function of numerous mutated (base/substituted) molecules were examined.

Site-specific labeling of RNA at internal ribose hydroxyl groups: terbium-assisted deoxyribozymes at work

A general and efficient single-step method was established for site-specific post-transcriptional labeling of RNA. Using Tb(3+) as accelerating cofactor for deoxyribozymes, various labeled guanosines were site-specifically attached to 2'-OH groups of internal adenosines in in vitro transcribed RNA. The DNA-catalyzed 2',5'-phosphodiester bond formation proceeded efficiently with fluorescent, spin-labeled, biotinylated, or cross-linker-modified guanosine triphosphates. The sequence context of the labeling site was systematically analyzed by mutating the nucleotides flanking the targeted adenosine. Labeling of adenosines in a purine-rich environment showed the fastest reactions and highest yields. Overall, practically useful yields >70% were obtained for 13 out of 16 possible nucleotide (nt) combinations. Using this approach, we demonstrate preparative labeling under mild conditions for up to ~160-nt-long RNAs, including spliceosomal U6 small nuclear RNA and a cyclic-di-AMP binding riboswitch RNA.

Fluorescently labeling synthetic RNAs

This protocol covers the steps required to incorporate N-hydroxysuccinamide (NHS) functionalized fluorophores into synthetic RNAs containing a residue derivatized with a primary amine. This method has been widely used to label RNA oligonucleotides that are used directly, targeted to a complementary RNA using base pairing rules, or covalently ligated to a RNA of interest (Ha et al., 1999; Hodak et al., 2005; Baum and Silverman, 2007; Sattint et al., 2008; Akiyama and Stone, 2009; Solomatin and Herschlag, 2009). While this technique is quite general, the details of a particular experiment can vary, therefore, it is always important to keep in mind that other labeling strategies are available and should potentially be considered.

Stable RNA nanoparticles as potential new generation drugs for cancer therapy

Human genome sequencing revealed that only ~1.5% of the DNA sequence coded for proteins. More and more evidence has uncovered that a substantial part of the 98.5% so-called "junk" DNAs actually code for noncoding RNAs. Two milestones, chemical drugs and protein drugs, have already appeared in the history of drug development, and it is expected that the third milestone in drug development will be RNA drugs or drugs that target RNA. This review focuses on the development of RNA therapeutics for potential cancer treatment by applying RNA nanotechnology. A therapeutic RNA nanoparticle is unique in that its scaffold, ligand, and therapeutic component can all be composed of RNA. The special physicochemical properties lend to the delivery of siRNA, miRNA, ribozymes, or riboswitches; imaging using fluogenenic RNA; and targeting using RNA aptamers. With recent advances in solving the chemical, enzymatic, and thermodynamic stability issues, RNA nanoparticles have been found to be advantageous for in vivo applications due to their uniform nano-scale size, precise stoichiometry, polyvalent nature, low immunogenicity, low toxicity, and target specificity. In vivo animal studies have revealed that RNA nanoparticles can specifically target tumors with favorable pharmacokinetic and pharmacodynamic parameters without unwanted accumulation in normal organs. This review summarizes the key studies that have led to the detailed understanding of RNA nanoparticle formation as well as chemical and thermodynamic stability issue. The methods for RNA nanoparticle construction, and the current challenges in the clinical application of RNA nanotechnology, such as endosome trapping and production costs, are also discussed.

A personal perspective on chemistry-driven RNA research

In this mini review, we discuss how our understanding of ribonucleic acid (RNA) properties becomes significantly deepened when a broad range of modern chemical and biophysical methods is applied. We span our perspective from RNA solid-phase synthesis and site-specific labeling to single-molecule fluorescence-resonance-energy-transfer imaging and NMR spectroscopy approaches to explore the dynamics of RNA over a broad timescale. We then move on to Fourier-transform-ion-cyclotron-resonance mass spectrometry (FT-ICR-MS) as a powerful technique for RNA sequencing and modification analysis. The novel methodological developments are discussed for selected biological systems that include the thiamine-pyrophosphate riboswitch, HIV and ribosomal A-site RNA, and transfer RNA.

Oligodeoxynucleotide containing s-functionalized 2'-deoxy-6-thioguanosine: facile tools for base-selective and site-specific internal modification of RNA

Chemically modified oligonucleotides play a significant role for genomic research. Modified nucleosides, such as with a fluorescent dye, can be obtained by chemical synthesis. Site-specifically modified long nucleic acids are obtained by ligation of chemically modified short oligonucleotides with enzyme, photochemistry, or catalytic DNA. The functionality-transfer ODN (FT-ODN), which contains 2'-deoxy-6-thioguanosine (6-thio-dG) functionalized with the 2-methyliden-1,3-diketone group, is hybridized with the target RNA to trigger the selective functionalization of the 4-amino group of the cytosine base at pH 7 or the 2-amino group of the guanine base at pH 9.4 or at pH 7.4 in the presence of NiCl(2). In particular, the functionality-transfer reaction (FTR) under the alkaline conditions or neutral conditions in the presence of NiCl(2) proceeds rapidly and selectively to lead to the modification of the target guanine. The transfer reaction of the acetylene-containing diketone group produces the acetylene-modified RNA, which can be subjected to the Cu(I)-catalyzed "click chemistry" with a variety of azide compounds for highly specific, internal modification of RNA.

Site-specific terminal and internal labeling of RNA by poly(A) polymerase tailing and copper-catalyzed or copper-free strain-promoted click chemistry

The modification of RNA with fluorophores, affinity tags and reactive moieties is of enormous utility for studying RNA localization, structure and dynamics as well as diverse biological phenomena involving RNA as an interacting partner. Here we report a labeling approach in which the RNA of interest—of either synthetic or biological origin—is modified at its 3′-end by a poly(A) polymerase with an azido-derivatized nucleotide. The azide is later on conjugated via copper-catalyzed or strain-promoted azide–alkyne click reaction. Under optimized conditions, a single modified nucleotide of choice (A, C, G, U) containing an azide at the 2′-position can be incorporated site-specifically. We have identified ligases that tolerate the presence of a 2′-azido group at the ligation site. This azide is subsequently reacted with a fluorophore alkyne. With this stepwise approach, we are able to achieve site-specific, internal backbone-labeling of de novo synthesized RNA molecules.

The oligodeoxynucleotide probes for the site-specific modification of RNA

As the knowledge of the biological functions of RNA expands, the demand for research tools to investigate intracellular RNA is increasing. Oligonucleotides can be rationally designed for the target RNA sequence, and therefore, have become a reliable platform for the development of specific molecules for RNA. The chemical modification of RNA has a strong impact on RNA research; the fluorescent labeling of RNA is useful to monitor RNA production, processing, relocation in the cell, interaction with other intracellular components and degradation, etc. Chemical modification may affect the RNA function through a variety of pathways, and therefore, would be potentially useful for biological research, therapeutic approach and artificial manipulation of the RNA function. This tutorial review starts with an introduction of the biological relevance of modified RNA, and focuses on the recent progress of the oligodeoxynucleotide probes for the covalent modifications of RNA. The prospects of this new technology are also discussed.

Pin-point chemical modification of RNA with diverse molecules through the functionality transfer reaction and the copper-catalyzed azide-alkyne cycloaddition reaction

The internal modification of RNA has been successfully achieved by the functionality transfer reaction (FTR) and following click chemistry with diverse azide compounds. The benefits of the FTR have been demonstrated by its specificity, rapidity, broad applicability, and procedure simplicity.

RNA labeling, conjugation and ligation

Advances in RNA nanotechnology will depend on the ability to manipulate, probe the structure and engineer the function of RNA with high precision. This article reviews current abilities to incorporate site-specific labels or to conjugate other useful molecules to RNA either directly or indirectly through post-synthetic labeling methodologies that have enabled a broader understanding of RNA structure and function. Readily applicable modifications to RNA can range from isotopic labels and fluorescent or other molecular probes to protein, lipid, glycoside or nucleic acid conjugates that can be introduced using combinations of synthetic chemistry, enzymatic incorporation and various conjugation chemistries. These labels, conjugations and ligations to RNA are quintessential for further investigation and applications of RNA as they enable the visualization, structural elucidation, localization, and biodistribution of modified RNA.

DNA as a versatile chemical component for catalysis, encoding, and stereocontrol

DNA (deoxyribonucleic acid) is the genetic material common to all of Earth's organisms. Our biological understanding of DNA is extensive and well-exploited. In recent years, chemists have begun to develop DNA for nonbiological applications in catalysis, encoding, and stereochemical control. This Review summarizes key advances in these three exciting research areas, each of which takes advantage of a different subset of DNA's useful chemical properties.

Activation and alteration of base selectivity by metal cations in the functionality-transfer reaction for RNA modification

Previously, we reported that the 2-methylidene-1,3-diketone unit of 6-thioguanosine transferred selectively to the amino group of cytosine at pH 7.0 and that its selectivity was changed to the guanine base at pH 9.6. In this study, it was found that the functionality-transfer reaction enhanced selectivity for the guanine base in the presence of divalent transition metal cations such as Ni(2+) and Co(2+) at pH 7.4.

A new usage of functionalized oligodeoxynucleotide probe for site-specific modification of a guanine base within RNA

Site-specific modification of RNA is of great significance to investigate RNA structure, function and dynamics. Recently, we reported a new method for sequence- and cytosine-selective chemical modification of RNA based on the functional group transfer reaction of the 1-phenyl-2-methylydene-1,3-diketone unit of the 6-thioguanosine base incorporated in the oligodeoxynucleotide probe. In this study, we describe that the functionality transfer rate is greatly enhanced and the selectivity is shifted to the guanine base when the reaction is performed under alkaline conditions. Detailed investigation indicated that the 2-amino group of the enolate form of rG is the reactant of the functionality transfer reaction. As a potential application of this efficient functionality transfer reaction, a pyrene group as a relatively large fluorescent group was successfully transferred to the target guanine base of RNA with a high guanine and site selectivity. This functionality transfer reaction with high efficiency and high site-selectivity would provide a new opportunity as a unique tool for the study of RNA.

Methods of site-specific labeling of RNA with fluorescent dyes

Single molecule fluorescence techniques offer unique insights into mechanisms of conformational changes of RNA. Knowing how to make fluorescently labeled RNA molecules and understanding potential limitations of different labeling strategies is essential for successful implementation of single molecule fluorescence techniques. This chapter offers a step by step overview of the process of obtaining RNA constructs ready for single molecule measurements. Several alternative methods are described for each step, and ways of troubleshooting the most common problems, in particular, splinted RNA ligation, are suggested.

Deoxyribozymes: selection design and serendipity in the development of DNA catalysts

One of the chemist's key motivations is to explore the forefront of catalysis. In this Account, we describe our laboratory's efforts at one such forefront: the use of DNA as a catalyst. Natural biological catalysts include both protein enzymes and RNA enzymes (ribozymes), whereas nature apparently uses DNA solely for genetic information storage. Nevertheless, the chemical similarities between RNA and DNA naturally lead to laboratory examination of DNA as a catalyst, especially because DNA is more stable than RNA and is less costly and easier to synthesize. Many catalytically active DNA sequences (deoxyribozymes, also called DNAzymes) have been identified in the laboratory by in vitro selection, in which many random DNA sequences are evaluated in parallel to find those rare sequences that have a desired functional ability. Since 2001, our research group has pursued new deoxyribozymes for various chemical reactions. We consider DNA simply as a large biopolymer that can adopt intricate three-dimensional structure and, in the presence of appropriate metal ions, generate the chemical complexity required to achieve catalysis. Our initial efforts focused on deoxyribozymes that ligate two RNA substrates. In these studies, we used only substrates that are readily obtained biochemically. Highly active deoxyribozymes were identified, with emergent questions regarding chemical selectivity during RNA phosphodiester bond formation. Deoxyribozymes allow synthesis of interesting RNA products, such as branches and lariats, that are otherwise challenging to prepare. Our experiments have demonstrated that deoxyribozymes can have very high rate enhancements and chemical selectivities. We have also shown how the in vitro selection process itself can be directed toward desired goals, such as selective formation of native 3'-5' RNA linkages. A final lesson is that unanticipated selection outcomes can be very interesting, highlighting the importance of allowing such opportunities in future experiments. More recently, we have begun using nonoligonucleotide substrates in our efforts with deoxyribozymes. We have especially focused on developing DNA catalysts for reactions of small molecules or amino acid side chains. For example, new deoxyribozymes have the catalytic power to create a nucleopeptide linkage between a tyrosine or serine side chain and the 5'-terminus of an RNA strand. Although considerable further work remains to establish DNA as a practical catalyst for small molecules and full-length proteins, the progress to date is very promising. The many lessons learned during the experiments described in this Account will help us and others to realize the full catalytic power of DNA.

Site-specific covalent modification of RNA guided by functionality-transfer oligodeoxynucleotides

Efficient methods for the covalent modification of large RNA molecules should find significance utility as innovative biological tools as well as therapeutic methods. In this study, the development of a general method for site-specific RNA modification guided by the functional ODN template has been investigated. The ODN probe containing 6-thioguanosine was modified by the methylenediketone derivative to form the S-functionalized ODN. Site-specific and cytosine-selective RNA modifications were achieved by the functionality-transfer reaction from the sulfur atom of the functionalized probe to the amino group of the cytosine base of the target strand. It was shown that the base and site selectivity were due to the close proximity of the reactants in the DNA-RNA duplexes.