Highly efficient ruthenium(II) porphyrin catalyzed amidation of aldehydes

Microwave Assisted Fast Synthesis of a Donor-Acceptor COF Towards Photooxidative Amidation Catalysis

The synthesis of covalent organic frameworks (COFs) at bulk scale require robust, straightforward, and cost-effective techniques. However, the traditional solvothermal synthetic methods of COFs suffer low scalability as well as requirement of sensitive reaction environment and multiday reaction time (2-10 days) which greatly restricts their practical application. Here, we report microwave assisted rapid and optimized synthesis of a donor-acceptor (D-A) based highly crystalline COF, TzPm-COF in second (10 sec) to minute (10 min) time scale. With increasing the reaction time from seconds to minutes crystallinity, porosity and morphological changes are observed for TzPm-COF. Owing to visible range light absorption, suitable band alignment, and low exciton binding energy (Eb=64.6 meV), TzPm-COF can efficaciously produce superoxide radical anion (O2 .-) after activating molecular oxygen (O2) which eventually drives aerobic photooxidative amidation reaction with high recyclability. This photocatalytic approach works well with a variety of substituted aromatic aldehydes having electron-withdrawing or donating groups and cyclic, acyclic, primary or secondary amines with moderate to high yield. Furthermore, catalytic mechanism was established by monitoring the real-time reaction progress through in situ diffuse reflectance infrared Fourier transform spectroscopic (DRIFTS) study.

One-Pot Oxidative Amidation of Aldehydes via the Generation of Nitrile Imine Intermediates

A one-pot procedure for the oxidative amidation of aldehydes via the in situ generation of reactive nitrile imine (NI) intermediates has been developed. Distinct from our progenitor processes, mechanistic and control experiments revealed that the NI undergoes rapid oxidation to an acyl diazene species, which then facilitates N-acylation of an amine. A range of substrates have been explored, including application in the synthesis of pharmaceutically relevant compounds.

Synthesis of amides directly from carboxylic acids and hydrazines

The method for amide bond synthesis described here utilizes carboxylic acids and hydrazines in the presence of a catalytic amount of ZnCl2. This is the first report that highlights the use of hydrazine as an amine partner for amide synthesis directly with carboxylic acids. Ammonia (gas) is the only by-product in this method. The methodology is simple and could help in the synthesis of peptides and natural product derivatives.

Study on enhancement of hemoglobin antitoxic ability modified with chromium and ruthenium

Hemoglobin is essential for carrying oxygen (O₂) in the blood. However, its ability to bind excessively to carbon monoxide (CO) makes it susceptible to CO poisoning. To reduce the risk of CO poisoning, Cr-based heme and Ru-based heme were selected from among many transition metal-based hemes based on their characteristics of adsorption conformation, binding intensity, spin multiplicity, and electronic properties. The results showed that hemoglobin modified by Cr-based heme and Ru-based heme had strong anti-CO poisoning abilities. The Cr-based heme and Ru-based heme exhibited much stronger affinity for O₂ (-190.67 kJ/mol and -143.18 kJ/mol, respectively) than Fe-based heme (-44.60 kJ/mol). Moreover, Cr-based heme and Ru-based heme exhibited much weaker affinity for CO (-121.50 kJ/mol and -120.88 kJ/mol, respectively) than their affinity for O₂, suggesting that they were less likely to cause CO poisoning. The electronic structure analysis also supported this conclusion. Additionally, molecular dynamics analysis showed that hemoglobin modified by Cr-based heme and Ru-based heme was stable. Our findings offer a novel and effective strategy for enhancing the reconstructed hemoglobin's ability to bind O₂ and reduce its potential for CO poisoning.

Redox-Neutral Dehydrogenative Cross-Coupling of Alcohols and Amines Enabled by Nickel Catalysis

Presented herein is a facile and straightforward synthetic method for the construction of amides via Ni/NHC-catalyzed amidation of alcohols with amines. The strategy exhibits various advantages over existing methods, including...

Nitrogen Atom Transfer Catalysis by Metallonitrene C-H Insertion: Photocatalytic Amidation of Aldehydes

C−H amination and amidation by catalytic nitrene transfer are well‐established and typically proceed via electrophilic attack of nitrenoid intermediates. In contrast, the insertion of (formal) terminal nitride ligands into C−H bonds is much less developed and catalytic nitrogen atom transfer remains unknown. We here report the synthesis of a formal terminal nitride complex of palladium. Photocrystallographic, magnetic, and computational characterization support the assignment as an authentic metallonitrene (Pd−N) with a diradical nitrogen ligand that is singly bonded to Pd^II. Despite the subvalent nitrene character, selective C−H insertion with aldehydes follows nucleophilic selectivity. Transamidation of the benzamide product is enabled by reaction with N₃SiMe₃. Based on these results, a photocatalytic protocol for aldehyde C−H trimethylsilylamidation was developed that exhibits inverted, nucleophilic selectivity as compared to typical nitrene transfer catalysis. This first example of catalytic C−H nitrogen atom transfer offers facile access to primary amides after deprotection.

Visible-Light-Mediated Oxidative Amidation of Aldehydes by Using Magnetic CdS Quantum Dots as a Photocatalyst

A magnetic CdS quantum dot (Fe₃ O₄ /polydopamine (PDA)/CdS) was synthesized through a facile and convenient method from inexpensive starting materials. Characterization of the prepared catalyst was performed by means of FTIR spectroscopy, XRD, SEM, TEM, energy-dispersive X-ray spectroscopy, and vibrating-sample magnetometer techniques. Fe₃ O₄ /PDA/CdS was found to be a highly active photocatalyst for the amidation of aromatic aldehydes by using air as a clean oxidant under mild conditions. The photocatalyst can be recovered by magnetic separation and successfully reused for five cycles without considerable loss of its catalytic activity.

Metal-free C-H Activation over Graphene Oxide toward Direct Syntheses of Structurally Different Amines and Amides in Water

Unprecedented metal-free synthesis of a variety of amines and amides is reported via amination of C(sp³)-H and C(sp²)-H bonds. The strategy involves graphene-oxide/I₂-catalyzed nitrene insertion using PhINTs as a nitrene (NT) source in water at room temperature. A wide range of structurally different substrates, viz., cyclohexane, cyclic ethers, arenes, alkyl aromatic systems, and aldehydes/ketones, having an α-phenyl ring have been employed successfully to afford the corresponding nitrene insertion product in good yield, albeit low in few cases. The envisaged method has superiority over others in terms of its operational simplicity, metal-free catalysis, use of water as a solvent, ambient reaction conditions, and reusability of the catalyst.

Uncatalyzed Oxidative C-H Amination of 9,10-Dihydro-9-Heteroanthracenes: A Mechanistic Study

A new method for the one‐step C−H amination of xanthene and thioxanthene with sulfonamides is reported, without the need for any metal catalyst. A benzoquinone was employed as a hydride (or two‐electron and one‐proton) acceptor. Moreover, a previously unknown and uncatalyzed reaction between iminoiodanes and xanthene, thioxanthene and dihydroacridines (9,10‐dihydro‐9‐heteroanthracenes or dihydroheteroanthracenes) is disclosed. The reactions proceed through hydride transfer from the heteroarene substrate to the iminoiodane or benzoquinone, followed by conjugate addition of the sulfonamide to the oxidized heteroaromatic compounds. These findings may have important mechanistic implications for metal‐catalyzed C−H amination processes involving nitrene transfer from iminoiodanes to dihydroheteroanthracenes. Due to the weak C−H bond, xanthene is an often‐employed substrate in mechanistic studies of C−H amination reactions, which are generally proposed to proceed via metal‐catalyzed nitrene insertion, especially for reactions involving nitrene or imido complexes that are less reactive (i.e., less strongly oxidizing). However, these substrates clearly undergo non‐catalyzed (proton‐coupled) redox coupling with amines, thus providing alternative pathways to the widely assumed metal‐catalyzed pathways.

One-pot synthesis of amides via the oxidative amidation of aldehydes and amines catalyzed by a copper-MOF

A method for oxidative amidation of aldehydes with primary amines was developed to synthesise a variety of amides using Cu₂(BDC)₂DABCO (Cu-MOF) as a recyclable heterogeneous catalyst, and N-chlorosuccinimide and aqueous tert-butyl hydroperoxide as oxidants in acetonitrile.

Efficient and phosphine-free bidentate N-heterocyclic carbene/ruthenium catalytic systems for the dehydrogenative amidation of alcohols and amines

An efficient and phosphine-free bidentate NHC/Ru catalytic system was discovered for the dehydrogenative amide synthesis from alcohols and amines.

Ruthenium-Based Catalytic Systems Incorporating a Labile Cyclooctadiene Ligand with N-Heterocyclic Carbene Precursors for the Atom-Economic Alcohol Amidation Using Amines

Transition-metal-catalyzed amide-bond formation from alcohols and amines is an atom-economic and eco-friendly route. Herein, we identified a highly active in situ N-heterocyclic carbene (NHC)/ruthenium (Ru) catalytic system for this amide synthesis. Various substrates, including sterically hindered ones, could be directly transformed into the corresponding amides with the catalyst loading as low as 0.25 mol.%. In this system, we replaced the p-cymene ligand of the Ru source with a relatively labile cyclooctadiene (cod) ligand so as to more efficiently obtain the corresponding poly-carbene Ru species. Expectedly, the weaker cod ligand could be more easily substituted with multiple mono-NHC ligands. Further high-resolution mass spectrometry (HRMS) analyses revealed that two tetra-carbene complexes were probably generated from the in situ catalytic system.

Ruthenium-Catalyzed Aerobic Oxidation of Amines

Amine oxidation is one of the fundamental reactions in organic synthesis as it leads to a variety of value-added products such as oximes, nitriles, imines, and amides among many others. These products comprise the key N-containing building blocks in the modern chemical industry, and such transformations, when achieved in the presence of molecular oxygen without using stoichiometric oxidants, are much preferred as they circumvent the production of unwanted wastes. In parallel, the versatility of ruthenium catalysts in various oxidative transformations is well-documented. Herein, this review focuses on aerobic oxidation of amines specifically by using ruthenium catalysts and highlights the major achievements in this direction and challenges that still need to be addressed.

Copper-amino group complexes supported on silica-coated magnetite nanoparticles: efficient catalyst for oxidative amidation of methyl arenes

Magnetite nanoparticles coated with mesoporous silica, Fe₃O₄@SiO₂, were prepared.

An efficient catalyst-free one-pot synthesis of primary amides from the aldehydes of the Baylis–Hillman reaction

Herein, a facile and efficient method for the preparation of allyl amides from the aldehydes of Baylis–Hillman adducts has been developed using a hydroxylamine/methanol system under a catalyst-free condition.

Brønsted Base-Mediated Aziridination of 2-Alkyl-Substituted-1,3-Dicarbonyl Compounds and 2-Acyl-Substituted-1,4-Dicarbonyl Compounds by Iminoiodanes

The synthesis of α,α-diacylaziridines and α,α,β-triacylaziridines from reaction of 2-alkyl-substituted-1,3-dicarbonyl compounds and 2-acyl-substituted-1,4-dicarbonyl compounds with arylsulfonyliminoiodinanes (ArSO2N=IPh) under Brønsted base-mediated atmospheric conditions is described. The reaction mechanism is thought to involve the formal oxidation of the substrate followed by aziridination of the ensuing α,β-unsaturated intermediate by the hypervalent iodine(iii) reagent.

Recent advances in C–H bond aminations catalyzed by ruthenium porphyrin complexes

This review deals with the use of ruthenium porphyrin complexes to catalyze hydrocarbon aminations. This class of versatile porphyrin catalysts are able to activate different nitrogen sources, such as iminoiodinanes and organic azides, and promote the synthesis of a variety of aza-derivatives. Many synthetic procedures have been discussed as well as catalytic mechanisms involved in order to give an overview on the use of ruthenium porphyrins to promote nitrene transfer reactions yielding aminated derivatives.

Porphyrin Cobalt(III) "Nitrene Radical" Reactivity; Hydrogen Atom Transfer from Ortho-YH Substituents to the Nitrene Moiety of Cobalt-Bound Aryl Nitrene Intermediates (Y = O, NH)

In the field of cobalt(II) porphyrin-catalyzed metallo-radical reactions, organic azides have emerged as successful nitrene transfer reagents. In the pursuit of employing ortho-YH substituted (Y = O, NH) aryl azides in Co(II) porphyrin-catalyzed nitrene transfer reactions, unexpected hydrogen atom transfer (HAT) from the OH or NH₂ group in the ortho-position to the nitrene moiety of the key radical-intermediate was observed. This leads to formation of reactive ortho-iminoquinonoid (Y = O) and phenylene diimine (Y = NH) species. These intermediates convert to subsequent products in non-catalyzed reactions, as is typical for these free organic compounds. As such, the observed reactions prevent the anticipated cobalt-mediated catalytic radical-type coupling of the nitrene radical intermediates to alkynes or alkenes. Nonetheless, the observed reactions provide valuable insights into the reactivity of transition metal nitrene-radical intermediates, and give access to ortho-iminoquinonoid and phenylene diimine intermediates from ortho-YH substituted aryl azides in a catalytic manner. The latter can be employed as intermediates in one-pot catalytic transformations. From the ortho-hydroxy aryl azide substrates both phenoxizinones and benzoxazines could be synthesized in high yields. From the ortho-amino aryl azide substrates azabenzene compounds were obtained as the main products. Computational studies support these observations, and reveal that HAT from the neighboring OH and NH₂ moiety to the nitrene radical moiety has a low energy barrier.

Advances in Synthetic Applications of Hypervalent Iodine Compounds

The preparation, structure, and chemistry of hypervalent iodine compounds are reviewed with emphasis on their synthetic application. Compounds of iodine possess reactivity similar to that of transition metals, but have the advantage of environmental sustainability and efficient utilization of natural resources. These compounds are widely used in organic synthesis as selective oxidants and environmentally friendly reagents. Synthetic uses of hypervalent iodine reagents in halogenation reactions, various oxidations, rearrangements, aminations, C-C bond-forming reactions, and transition metal-catalyzed reactions are summarized and discussed. Recent discovery of hypervalent catalytic systems and recyclable reagents, and the development of new enantioselective reactions using chiral hypervalent iodine compounds represent a particularly important achievement in the field of hypervalent iodine chemistry. One of the goals of this Review is to attract the attention of the scientific community as to the benefits of using hypervalent iodine compounds as an environmentally sustainable alternative to heavy metals.

Atom-economic dehydrogenative amide synthesis via ruthenium catalysis

Recent developments of ruthenium-catalyzed atom-economic transformations for dehydrogenative amide synthesis are reviewed.

Porous Ru/RuOx/LDH as highly active heterogeneous catalysts for the aerobic oxidation of alcohols

Porous LDH supported Ru/RuO_x nanocatalysts exhibited much better catalytic activity and stability than conventional Ru-based catalysts for alcohol oxidation.

Synthesis of 1,4-amino alcohols by Grignard reagent addition to THF and N-tosyliminobenzyliodinane

The synthesis of 1,4-amino alcohols from THF treated with N-tosyliminobenzyliodinane (PhINTs) followed by a Grignard reagent under mild reaction conditions at room temperature is described herein. Various Grignard reagents were shown to be compatible, furnishing the corresponding 4-substituted-N-1,4-tosylamino alcohols in good to excellent yields. A partial or full detosylation of the N-tosyl-1,4-amino alcohol was observed in instances involving a sterically bulky Grignard reagent, leading to the deprotected 1,4-amino alcohol product in moderate to good yields. The synthetic utility of this protocol was demonstrated by the synthesis of a 5-substituted-N-tosyl-1,5-amino alcohol from THP and the conversion of two examples to their corresponding γ-lactam and pyrrolidine adducts.

Rhodium-catalyzed oxidative amidation of allylic alcohols and aldehydes: effective conversion of amines and anilines into amides

The rhodium-catalyzed oxidative amidation of allylic alcohols and aldehydes is reported.

The rhodium-catalyzed oxidative amidation of allylic alcohols and aldehydes is reported. In situ generated [(BINAP)Rh]BF₄ catalyzes the one-pot isomerization/oxidative amidation of allylic alcohols or direct amidation of aldehydes using acetone or styrene as the hydrogen acceptor. The conditions are general, affording good to excellent yields with a wide array of amine and aniline nucleophiles, and chemoselective, other alcohols do not participate in the oxidation reaction. Utilization of biphasic conditions is critical, as they promote an equilibrium between the imine/enamine byproducts and the hemiaminal, which can undergo oxidation to the amide.

Iminoiodane- and Brønsted base-mediated cross dehydrogenative coupling of cyclic ethers with 1,3-dicarbonyl compounds

A one-pot, two-step approach to prepare 2-tetrahydrofuran and -pyran substituted 1,3-dicarbonyl compounds by PhI=NTs-mediated amination/Brønsted base-catalyzed cross dehydrogenative coupling (CDC) reaction of the cyclic ether and 1,3-dicarbonyl derivative under mild conditions is reported. The reaction is compatible with a variety of cyclic ethers and 1,3-dicarbonyl compounds, affording the corresponding coupled products in moderate to good yields of up to 80% over two steps.

Efficient Synthesis of Amides and Esters from Alcohols under Aerobic Ambient Conditions Catalyzed by a Au/Mesoporous Al2 O3 Nanocatalyst

An efficient heterogeneous Au/mesoporous alumina nanocatalyst has been successfully developed for the synthesis of amides and esters from simple building blocks of readily available alcohols and amines. The processes were simple and were performed at room temperature and atmospheric pressure of O2 to form the desired products with up to 97 % isolated yield. The ability of Au/mesoporous alumina to catalyze these reactions under ambient conditions further enhances the sustainability of these chemical processes. Furthermore, the nanocatalyst was stable to air and water and could be recovered and reused easily. The enhanced catalytic activity of Au/mesoporous alumina might be attributed to the presence of negatively charged Au nanoparticles that could promote oxidation processes as well as the stability of the mesoporous alumina support calcined at a high temperature of 800 °C.