Surface-enhanced Raman spectroscopy for trace arsenic detection in contaminated water

Facile synthesis of gold nanostars for the duplex detection of pesticide residues in grapes using SERS

In recent years, concerns have been raised regarding the contamination of grapes with pesticide residues. As consumer demand for safer food products grows, regular monitoring of pesticide residues in food has become essential. This study sought to develop a rapid and sensitive technique for detecting two specific pesticides (phosmet and paraquat) present on the grape surface using the surface-enhanced Raman spectroscopy (SERS) method. Gold nanostars (AuNS) particles were synthesized, featuring spiky tips that act as hot spots for localized surface plasmon resonance, thereby enhancing Raman signals. Additionally, the roughened surface of AuNS increases the surface area, resulting in improved interactions between the substrate and analyte molecules. Prominent Raman peaks of mixed contaminants were acquired and used to characterize and quantify the pesticides. It was observed that the SERS intensity of the Raman peaks changed in proportion to the concentration ratio of phosmet and paraquat. Moreover, AuNS exhibited superior SERS enhancement compared to gold nanoparticles. The results demonstrate that the lowest detectable concentration for both pesticides on grape surfaces is 0.5 mg/kg. These findings suggest that SERS coupled with AuNS constitutes a practical and promising approach for detecting and quantifying trace contaminants in food. PRACTICAL APPLICATION: This research established a novel surface-enhanced Raman spectroscopy (SERS) method coupled with a simplified extraction protocol and gold nanostar substrates to detect trace levels of pesticides in fresh produce. The detection limits meet the maximum residue limits set by the EPA. This substrate has great potential for rapid measurements of chemical contaminants in foods.

Ultrasensitive Electrochemiluminescence Sensor Utilizing Aggregation-Induced Emission Active Probe for Accurate Arsenite Quantification in Rice Grains

Arsenic (As) constitutes a substantial threat to global ecosystems and public health. An accurate quantification of inorganic arsenite (As(III)) in rice grains is crucial for ensuring food safety and human well-being. Herein, we constructed an electrochemiluminescence (ECL) biosensor utilizing aggregation-induced emission (AIE) active Pdots for the sensitive detection of As(III) in rice. We synthesized tetraphenylethylene-based AIE-active Pdots, exhibiting stable and highly efficient ECL emission in their aggregated states. Owing to the overlap of spectra, we employed an electrochemiluminescence resonance energy transfer (ECL-RET) system, with the Pdots as the donor and black hole quencher (BHQ) as the acceptor. Upon the introduction of As(III), the conformational changes of As(III)-specific aptamer could trigger the detachment of BHQ-labeled DNA aptamer from the electrode surface, leading to the recovery of the ECL signal. The target-induced "signal-on" bioassay enabled the sensitive and specific detection of As(III) with a linear range of 10 pM to 500 nM, with an ultralow limit of detection (LOD) of 5.8 pM/0.4 ppt. These values significantly surpass those of existing sensors designed for As(III) quantification in rice. Furthermore, by employing amylase hydrolysis for efficient extraction, we successfully applied our sensor to measure As(III) in actual rice samples sourced from diverse regions of China. The results obtained using our sensor were in close agreement with those derived from the reference method of HPLC-ICP-MS. This study not only presents a sensitive and reliable method for detecting arsenite but also underscores its potential applications in enhancing food safety, agriculture practices, and environmental monitoring.

In situ formation of CuxO/ZnO photocatalysts for efficient simultaneous oxidation of As (III) and adsorption of As (V): Effect of Cu loading

The introduction of Cu ions onto ZnO leads to alterations in the electrical, optical, and magnetic characteristics of ZnO. These transformations, in turn, result in heightened photocatalytic activity and enhanced stability when employed in the degradation of both organic and inorganic pollutants. Here, a novel photocatalytic-adsorbent system is developed using zinc oxide (ZnO) nanostructures modified with Cu (II) ions in an aqueous solution containing 40 mg/L of As (III). The system utilizes UV-A light (365 nm) as the irradiation source, and the weight percentage of Cu (II) in the composite varies from 0 to 20%. The experimental results reveal significant adsorption of As (III), ranging from 20 to 50%, depending on the solution's Cu (II) content. Remarkably, the ZnO10%Cu composite exhibits the highest photocatalytic activity, achieving 40% adsorption and complete oxidation of As (III) within 25 min of irradiation. Characterization of the composite after the photocatalytic treatment reveals the effective adsorption of As (V) within its structure. Furthermore, no traces of Cu (II) ions are detected in the solution after the reaction, indicating their successful adsorption onto the ZnO surface as Cu (I) and Cu (II) ions. This research marks a significant advancement in harnessing innovative materials for efficient arsenic removal, offering promising insights into the development of novel photocatalytic-adsorbent systems.

Detoxification of arsenite by iodide in frozen solution

The oxidation of arsenite (As(III)) to arsenate (As(V)) has received significant attention because it helps mitigate the hazardous and adverse effects of As(III) and subsequently improves the effectiveness of arsenic removal. This study developed an efficient freezing technology for the oxidative transformation of As(III) based on iodide (I-). For a sample containing a very low concentration of 20 μM As(III) and 200 μM I- frozen at -20 °C, approximately 19 μM As(V) was formed after reaction for 0.5 h at pH 3. This rapid conversion has never been achieved in previous studies. However, As(V) was not generated in water at 25 °C. The acceleration of the oxidation of As(III) by I- in ice may be attributed to the freeze-concentration effect. During freezing, all components (i.e., As(III), I-, and protons) are highly concentrated in the ice grain boundary regions, resulting in thermodynamically and kinetically favorable conditions for the redox reaction between As(III) and I-. The efficiency of the oxidation of As(III) using I- increased at high I- concentrations and low pH values. The low freezing temperature (below -20 °C) hindered the oxidative transformation of As(III) by I-. The efficiency of the oxidation of As(III) significantly increased using a fixed initial concentration of I- by subjecting the system to six freezing-melting cycles. The outcomes of this study suggest the possibility of the self-detoxification of As(III) in the natural environment, indicating the potential for developing an eco-friendly method for the treatment of As(III)-contaminated areas in regions with a cold climate. It also demonstrates radical remediation to almost completely remove a very small amount of As(III) that was input in As(III)-contaminated wastewater detoxification, a benchmark that existing methods have been unable to achieve.

A core-molecule-shell Au@PATP@Ag nanorod for nicotine detection based on surface-enhanced Raman scattering technology

Nicotine is an addictive substance often found in tobacco and cigarette smoke and excessive exposure to it can cause various diseases. Herein, core-molecule-shell gold/4-aminothiophenol/silver nanorods (Au@PATP@Ag NRs) were prepared for quantitative detection of nicotine by using surface-enhanced Raman scattering (SERS) technology. The obtained Au@PATP@Ag NRs showed an outstanding SERS effect due to the plasticity of their morphology and the bimetallic synergistic effect between the excellent stability of Au and the highly enhanced effect of Ag. The Au@PATP@Ag NRs substrate exhibited an extremely high enhancement factor (EF) of 2.17 × 107. In addition, in-situ synthesized PATP was used as an internal standard to correct signal fluctuation and improve the reliability of quantitative nicotine detection. A wide linear dynamic range from 10-8 to 10-3 M was obtained and an ultra-low limit of detection (LOD) was about 3.12 × 10-9 M, which was superior to most of previously reported methods. This work has also been used for determining nicotine content in cigarettes and simulated environmental tobacco smoke by using a portable device. These results indicated that the developed SERS method had many potential applications in the quantitative determination of nicotine in real tobacco samples.

Application of surface-enhanced Raman scattering to qualitative and quantitative analysis of arsenic species

Given the toxicity of arsenic, there is an urgent need for the development of efficient and reliable detection systems. Raman spectroscopy, a powerful tool for material characterization and analysis, can be used to explore the properties of a wide range of different materials. Surface-enhanced Raman spectroscopy (SERS) can detect low concentrations of chemicals. This review focuses on the progress of qualitative and quantitative studies of the adsorption processes of inorganic arsenic and organic arsenic in aqueous media using Raman spectroscopy in recent years and discusses the application of Raman spectroscopy theory simulations to arsenic adsorption processes. Sliver nanoparticles are generally used as the SERS substrate to detect arsenic. Inorganic arsenic is chemisorbed onto the silver surface by forming As-O-Ag bonds, and the Raman shift difference in the As-O stretching (∼60 cm-1) between As(V) and As(III) allows SERS to detect and distinguish between As(V) and As(III) in groundwater samples. For organic arsenicals, specific compounds can be identified based on spectral differences in the vibration modes of the chemical bonds. Under the same laser excitation, the intensity of the Raman spectra for different arsenic concentrations is linearly related to the concentration, thus allowing quantitative analysis of arsenic. Molecular modeling of adsorbed analytes via density functional theory calculation (DFT) can predict the Raman shifts of analytes in different laser wavelengths.

Heteropolyacids: An Ultrasensitive Ionic Volume-Enhanced Raman Scattering Platform

Surface-enhanced Raman scattering (SERS) is regarded as the most direct and powerful tool to identify chemical fingerprints. However, current SERS substrate materials still face some critical challenges, including low molecular utilization efficiency and low selectivity. Herein, a novel oxygen vacancy heteropolyacid─H₁₀Fe₃Mo₂₁O₅₁ (HFMO)─is developed as a high-performance volume-enhanced Raman scattering (VERS)-active platform. Due to its merit of water solubility, HFMO forms a special coordination bond with the probe molecule at the molecular level, which allows its enhancing ability to be comparable to that of noble metals. An enhancement factor of 1.26 × 10⁹ and a very low detection limit of 10^-13 M for rhodamine 6G were obtained. A robust O-N coordination bond was formed between the anion of HFMO and the probe molecule, resulting in a special electron transfer path (Mo-O-N) with high selectivity, which is verified using X-ray photoelectron spectroscopy analysis and density functional theory calculations. That is to say, the proposed HFMO platform has excellent VERS enhancing effect, specifically for the molecules containing the imino group (e.g., methyl blue, detection limit: 10^-11 M), offering the merits of high reproducibility and uniformity, high-temperature resistance, long-time laser irradiation, and strong acid resistance. Such an initial effort on the ionic type VERS platform may enable the further development of highly sensitive, highly selective, and water-soluble VERS technology.

Nitrogen-doped carbon dots/Fe3+-based fluorescent probe for the "off-on" sensing of As(V) in seafood

To better satisfy the application of rapid detection methods in the detection of As(V) in complex food substrates, we developed an "off-on" fluorescence assay to detect As(V) based on the competition between the electron transfer effect of nitrogen-doped carbon dots (N-CDs)/Fe³⁺ and the complexation reaction of As(V)/Fe³⁺, using N-CDs/Fe³⁺ as a fluorescence probe. Solid-phase extraction (SPE) was used to eliminate matrix interference during sample pretreatment. The detection limit was 7.6 ng g^-1, with a linear range of 10-100 ng g^-1. The method was further used to determine As(V) in different seafood products including snapper, shrimp, clams, and kelp. At the same time, the recovery of the method was validated by high-performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP/MS), indicating that the developed method had good recoveries from 86% to 117% and met the needs for accurate determination of As(V). This approach has shown excellent application potential in the field of As(V) detection in various seafood products.

pH dependent electro-oxidation of arsenite on gold surface: Relative kinetics and sensitivity

A detailed kinetic investigation of As(III) oxidation was performed on gold surface within pH between ∼3.0 and ∼9.0. It was found that the As(III) oxidation on the gold surface follows a purely adsorption-controlled process irrespective of pH. The evaluated adsorption equilibrium constant decreased from 3.21 × 10⁵ to 1.61 × 10⁵ mol L^-1 for acidic to basic medium, which implies the strong affinity of the arsenic species in the acidic medium. Besides, the estimation of Gibbs free energy revealed that an acidic medium promotes arsenic oxidation on gold surface. In mechanistic aspect, the oxidation reaction adopts a stepwise pathway for acidic medium and a concerted pathway for neutral and basic medium. From the substantial kinetic evaluation, it is established that a conducive and compatible environment for the oxidation of arsenic was found in an acidic medium rather than a basic or neutral medium on gold surface. Besides, in sensitivity concern, neutral and highly acidic medium is quite favourable for the arsenite oxidation on gold surface.

Equilibria of semi-volatile isothiazolinones between air and glass surfaces measured by gas chromatography and Raman spectroscopy

Trace amounts of semi-volatile organic compounds (SVOCs) of the two isothiazolinones of 2-methylisothiazol-3(2H)-one (MIT) and 2-octyl-4-isothiazolin-3-one (OIT) were detected both in the air and on glass surfaces. Equilibria of SVOCs between air and glass were examined by solid phase microextraction-gas chromatography/mass spectrometry (SPME-GC/MS). Surface to air distribution ratios of K_sa for MIT and OIT were determined to be 5.10 m and 281.74 m, respectively, suggesting more abundant MIT in the gas phase by a factor of ∼55. In addition, a facile method of silver nanocube (AgNC)-assisted surface-enhanced Raman scattering (SERS) has been developed for the rapid and sensitive detection of MIT and OIT on glass surfaces. According to MIT and OIT concentration-correlated SERS intensities of Raman peaks at ∼1585 cm^-1 and ∼1125 cm^-1, respectively. Their calibration curves have been obtained in the concentration ranges between 10^-3 to 10^-10 M and 10^-3 to 10^-11 M with their linearity of 0.9986 and 0.9989 for MIT and OIT, respectively. The limits of detection (LODs) of the two isothiazolinones were estimated at 10^-10 M, and 10^-11 M for MIT and OIT, respectively. Our results indicate that AgNC-assisted SERS spectra are a rapid and high-ultrasensitive method for the quantification of MIT and OIT in practical applications. The development of analytical methods and determination of the Ksa value obtained in this study can be applied to the prediction of the exposure to MIT and OIT from various chemical products and dynamic behaviors to assess human health risks in indoor environments.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

On-site detection of As(III) based on silver nanoparticles aggregation mediated by phosphates using surface-enhanced Raman scattering (SERS)

A portable and simple method was developed for on-site selective determination of As(III) based on the SERS signal of As(III)-O vibration. The method relies on the synergistic effect of nanoparticles aggregation and analyte adsorption. Experimental results demonstrated that phosphate replaced the ligands of HH@Ag NPs, which in turn facilitated the adsorption of As(III) on the surface of HH@Ag NPs. The phosphate was introduced as an agglomerating agent to improve the detection ability of the method for As(III). The method shows good selectivity and linear relationship between 5 × 10^-8 and 0.8 × 10^-6 M, with the detection limit of 1.8 × 10^-9 M. The method was applied to actual water samples and successfully detected As(III), indicating that the method could have application potential in actual detection scenarios.

High efficient arsenic removal by In-layer sulphur of layered double hydroxide

High-risk arsenic contamination found in aqueous system is reported across the world and causing severe environmental issues. In this study, the Mg-Al Layered Double Hydroxide (LDH) modified by sulphur species (LDH-S) was found exhibiting high effectivity and selectivity in As(V) removal owing to the strong interaction between embedded HS^- and AsO₄^3-. The LDH-S with Mg to Al ratio 2-1 give the best performance with As(V) adsorption capacity 40.8 mg/g, which is 715% higher than that of pristine LDH (2-1). The adsorbent exhibits a high tolerance to concentrated competitive anions. In the continuous flow test, the adsorbent can reduce the As(V) concentration from 20 ppm to below-ppb-level indicating the potential in industry application. The adsorption mechanism is experimentally investigated and examined by Density Function Theory (DFT) calculation. The result illustrates that, differ from the traditional ion exchange mechanism of LDH, the enhanced removal capacity and selectivity of LDH-S for As(V) is attributed to the strong affinity between H atom from HS- ion (in the interlayer region of LDH) and the O atom from AsO₄^3-.

Development of shipboard automatic flow injection analysis-Surface-enhanced Raman spectroscopy instrument toward onsite detection of trace polycyclic aromatic hydrocarbons in water environment

The qualitative and quantitative analysis of polycyclic aromatic hydrocarbons (PAHs) has been important for the environmental control of persistent organic pollutants for decades. Considering the potential risk of deterioration, degradation, and external pollution during transportation, the development of rapid and onsite detection of trace PAHs is in demand. Here, taking the advantage of high sensitivity of surface-enhanced Raman spectroscopy (SERS), we developed a shipboard instrument by combining a portable Raman instrument and a flow injection device, integrating the sample pretreatment and target detection step by step. The feasibility of the instrument was demonstrated by detecting trace benzo[a]pyrene from different water environments with the lowest detection concentration less than 1 µg/l. The reliable stability and repeatability indicate that in the case of emergency response, the developed flow injection analysis-SERS instrument is very promising for the quantitative and qualitative analysis of diverse organic pollutants other than PAHs in water environments.

Recent Advances in Colorimetric Detection of Arsenic Using Metal-Based Nanoparticles

Nowadays, arsenic (III) contamination of drinking water is a global issue. Laboratory and instrument-based techniques are typically used to detect arsenic in water, with an accuracy of 1 ppb. However, such detection methods require a laboratory-based environment, skilled labor, and additional costs for setup. As a result, several metal-based nanoparticles have been studied to prepare a cost-effective and straightforward detector for arsenic (III) ions. Among the developed strategies, colorimetric detection is one of the simplest methods to detect arsenic (III) in water. Several portable digital detection technologies make nanoparticle-based colorimetric detectors useful for on-site arsenic detection. The present review showcases several metal-based nanoparticles that can detect arsenic (III) colorimetrically at a concentration of ~0.12 ppb or lower in water. A literature survey suggests that biomolecule-based metal nanoparticles could serve as low-cost, facile, susceptible, and eco-friendly alternatives for detecting arsenic (III). This review also describes future directions, perspectives and challenges in developing this alternative technology, which will help us reach a new milestone in designing an effective arsenic detector for commercial use.

DNA-Gated Graphene Field-Effect Transistors for Specific Detection of Arsenic(III) in Rice

As one of the most toxic forms of arsenic, inorganic As(III) is easy to accumulate in rice, leading to severe public health problems. Effective control of As(III) requires the development of fast analytical methods for its detection with high sensitivity and specificity. Toward this end, in this work, we report the fabrication of an As(III) electrochemical sensor based on a solution-gated graphene transistor (SGGT) platform with a novel sensing mechanism. The gold gate electrode of the SGGT was modified with DNA probes and then blocked with bovine serum albumin (BSA). The specific interaction between As(III) and gold disrupted the adsorption states of DNA probes, redistributing surface charges on the gate electrode, further leading to potential drop changes at the interfaces of the gate electrode and graphene active layer. This new mechanism based on DNA-charge-redistribution-induced SGGT current responses (denoted as "DNA-SGGT") was found to greatly improve the selectivity of the sensor: the response of DNA-SGGT to As(III) was effectively enhanced fourfold, while to other interfering cations, it was significantly reduced. The optimized sensor showed a detection limit as low as 5 nM with superior selectivity to As(III). The as-prepared DNA-SGGT-based sensor has also been successfully applied to the detection of As(III) in practical rice samples with a high recovery rate, showing great potential for heavy metal detection in many types of food samples.

A colorimetric assay for the determination of trace arsenic based on in-situ formation of AuNPs with synergistic effect of arsine and iodide

In this work, we propose a colorimetric assay for the determination of trace arsenic based on in-situ formation of AuNPs with the synergistic effect of arsine (AsH₃) and iodide. AsH₃, generated by hydride generation of As^III in the sample or standard solution, enters into the HAuCl₄ solution containing polyvinyl alcohol (PVA) and KI, and then reacts rapidly to form AuNPs, resulting in the solution color changing from light yellow to pink. Hydride generation applied here not only produces a strong reducing agent AsH₃, but also effectively reduces matrix interference. The introduction of I^- promotes the reaction by reducing the Au precursor from trivalent state to monovalent state, thus accelerating the formation of AuNPs with AsH₃ and improving the sensitivity for the detection of arsenic. Trace As^III as low as 10 μg L^-1 in 3 mL sample solution can produce the change in color visible to the naked eye. Moreover, the use of the stabilizer PVA and the gaseous strong-reducing agent AsH₃ evenly dispersed in the reaction solution lead to the formation of well-distributed and fine AuNPs of size changing little with the dosage of AsH₃. The whole analysis process only takes 30 min under ambient condition without complicated synthesis and pretreatment. The proposed assay is simple, stable, sensitive and selective, providing a convenient and cost-effective choice for on-site trace arsenic detection in real samples.

Nano-Enabled sensors for detection of arsenic in water

The elevated cases of arsenic contamination reported across the globe have made its early detection and remediation an active area of research. Although, the World Health Organisation has set the maximum provisional value for arsenic in drinking water at 10 parts per billion, yet concentrations as high as 5000 parts per billion are still reported. In human beings, chronic arsenic exposure can culminate into lethal diseases such as cancer. Thus, there is a need for urgent emergence of efficient and reliable detection system. This paper offers an overview of the state-of-art knowledge on current arsenic detection mechanisms. The central agenda of this paper is to develop an understanding into the nano-enabled methods for arsenic detection with an emphasis on strategic fabrication of nanostructures and the modulation of nanomaterial chemistry in order to strengthen the knowledge into novel nano-enabled solutions for arsenic contamination. Towards the end prospects for arsenic detection in water are also prompted.

Time-Domain Observation of Surface-Enhanced Coherent Raman Scattering with 105-106 Enhancement

Combining surface-enhanced Raman scattering (SERS) with the coherent nonlinear Raman technique is a promising route for achieving higher sensitivity and time-resolved SERS measurements, yet such attempts have just been started. Here, we report time-domain Raman measurements of trans-1,2-bis(4-pyridyl)ethylene (BPE) adsorbed on gold nanoparticle assemblies (GNAs), which were carried out with impulsive stimulated Raman spectroscopy using sub-8 fs pulses. We observe coherent nuclear wavepacket motion of BPE on GNAs with drastic enhancement through the surface plasmon resonance, which provides information on the Raman-active vibrations in the time domain. Through Fourier transform of the measured time-domain Raman data, we obtained SERS spectra of BPE on GNAs with enhancement factors as high as 10⁵-10⁶. The present study not only demonstrates applicability of time-domain nonlinear Raman techniques in SERS, i.e., surface-enhanced impulsive stimulated Raman spectroscopy (SE-ISRS), but also provides a technical basis for femtosecond time-resolved SE-ISRS experiments to track ultrafast dynamics of the adsorbates.

In Situ Differentiation of Multiplex Noncovalent Interactions Using SERS and Chemometrics

Probing changes of noncovalent interactions is crucial to study the binding efficiencies and strengths of (bio)molecular complexes. While surface-enhanced Raman scattering (SERS) offers unique molecular fingerprints to examine such interactions in situ, current platforms are only able to recognize hydrogen bonds because of their reliance on manual spectral identification. Here, we differentiate multiple intermolecular interactions between two interacting species by synergizing plasmonic liquid marble-based SERS platforms, chemometrics, and density functional theory. We demonstrate that characteristic 3-mercaptobenzoic acid (probe) Raman signals have distinct peak shifts upon hydrogen bonding and ionic interactions with tert-butylamine, a model interacting species. Notably, we further quantify the contributions from each noncovalent interaction coexisting in different proportions. As a proof-of-concept, we detect and categorize biologically important nucleotide bases based on molecule-specific interactions. This will potentially be useful to study how subtle changes in biomolecular interactions affect their structural and binding properties.

A competitive coordination-based immobilization-free electrochemical biosensor for highly sensitive detection of arsenic(v) using a CeO2-DNA nanoprobe

We developed a competitive coordination-based immobilization-free electrochemical biosensor for highly sensitive and selective detection of arsenic(v) using a CeO₂-DNA nanoprobe, which effectively circumvented complicated modification procedures and successfully achieved arsenic(v) determination in natural water samples.

Shapes of epitaxial gold nanocrystals on SrTiO3 substrates

Morphological control of gold nanocrystals is important as their catalytic and optical properties are highly shape dependent.

Interactions between gold, thiol and As(iii) for colorimetric sensing

Arsenite cannot crosslink glutathione-capped gold nanoparticles but a high concentration of arsenite can displace adsorbed glutathione, indicating that any two species from gold, thiol and arsenite can react.

Synthesis of corrugated surface AgNWs and their applications in surface enhanced Raman spectroscopy

Among metals, AgNWs are considered to be excellent materials for use in surface enhancement Raman spectroscopic (SERS) sensing due to their superior electrical properties, strong electromagnetic field generation and strong enhancement intensity.

Automated Determination of As(III) in Waters with an Electrochemical Sensor Integrated into a Modular Microfluidic System

The presence of high levels of arsenic in waters poses a threat to the human health in many countries all over the world. Effective surveillance programs of water quality require the implementation of in-field tests to assess early the presence of this metal ion and other contaminants. To date, there exist few market-available analytical approaches that suffer from important limitations related to cost, in addition to complex reactions, very long analysis times, and/or high limits of detection. This work describes a robust electrochemical sensor integrated into a modular microfluidic system that shows a clear potential to be deployed for the on-site monitoring of inorganic As(III) species. Flexible and transparent microfluidic modules are fabricated by rapid prototyping techniques and include different microfluidic components among them, flow cells where electrochemical sensors can be easily and reversibly inserted. The electrochemical sensor comprises a gold nanoparticle (AuNP)-modified gold thin-film electrode that is readily applied to the sensitive detection of As(III) by anodic stripping linear sweep voltammetry. The microfluidic system enables the automatic sensor calibration, sample uptake, and preconditioning as well as As(III) detection. The system response to As(III) is linear in a concentration range of 1-150 μg L^-1, with a detection limit of 0.42 μg L^-1, which is well below the threshold value of 10 μg L^-1 set by the World Health Organization. Analysis of tap water and two water samples from two Argentinean aquifers, spiked with different As(III) concentrations, demonstrates the excellent performance of the system.

Colorimetric and electrochemical arsenate assays by exploiting the peroxidase-like activity of FeOOH nanorods

The authors describe an electrochemical and an optical method for the determination of As(V) by using iron oxyhydroxide (FeOOH) nanorods that display peroxidase-mimicking activity. The nanorods catalyze the oxidation of substrate ABTS by H₂O₂ to form a green product with an absorption maximum at 418 nm. If, however, As(V) is electrostatically adsorbed on the nanorods, the oxidation is gradually inhibited. A colorimetric assay was worked out based on these findings. Response is linear in the 0 to 8 ppb and 8 to 200 ppb As(V) concentration range, and the detection limit is 0.1 ppb. Even higher sensitivity is achieved in an electrochemical method which is based on the excellent electrical conductivity of FeOOH nanorods. Electrochemical analysis of As(V) was achieved by first adsorbing As(V) on the nanorods. This inhibits the ABTS reduction current signal, best measured at a potential of 150 mV (vs. Ag/AgCl). The linear range extends from 0.04 to 200 ppb, and the detection limit is as low as 12 ppt. Graphical abstract Schematic representation of FeOOH nanorod-based colorimetric and electrochemical assays for arsenate (As(V)). As(V) adsorbed on FeOOH nanorods inhibits the peroxidase-mimicking activity of nanorods, and a colorimetric and electrochemical dual-signal assay was constructed to achieve sensitive determination of As(V).

Nanomaterial-based aptamer sensors for arsenic detection

Arsenic (As) is a highly toxic contaminant in the environment and a serious carcinogen for the human being. The toxicity of arsenic significantly threatens environmental and human health. The effective removing technology for arsenic remains challenging, and one of the reasons is due to the lack of powerful detection method in the complex environmental matrix. There is thus an urgent need to develop novel analytical methods for arsenic, preferably with the potential for the field-testing. To combat arsenic pollution and maintain a healthy environment and eco-system, many analytical methods have been developed for arsenic detection in various samples. Among these strategies, biosensors hold great promise for rapid detection of arsenic, in particular, nanomaterials-based aptamer sensors have attracted significant attention due to their simplicity, high sensitivity and rapidness. In this paper, we reviewed the recent development and applications of aptamer sensors (aptasensors) based-on nanomaterial for arsenic detection, in particular with emphasis on the works using optical and electrochemical technologies. We also discussed the recent novel technology in aptasensors development for arsenic detection, including nucleic acid amplification for signal enhancement and device integration for the portability of arsenic sensors. We are hoping this review could inspire further researches in developing novel nanotechnologies based aptasensors for possible on-site detection of arsenic.

Fabrication of Au Nanorods by the Oblique Angle Deposition Process for Trace Detection of Methamphetamine with Surface-Enhanced Raman Scattering

Oblique angle deposition (OAD) is a simple, low cost, effective, and maskless nanofabrication process. It can offer a reliable method for the mass fabrication of uniform metal nanorods which can be used as the surface-enhanced Raman scattering (SERS) substrate with an excellent enhancing performance. Up to now, Ag nanorods SERS substrates have been extensively studied. However, Ag is chemically active and easy to oxidize under atmospheric conditions. Comparatively, Au is chemically stable and has better biocompatibility than Ag. In this paper, we in detail, studied the electromechanical (EM) field distribution simulation, fabrication, and application of Au nanorods (AuNRs) on trace detection of methamphetamine. According to the finite-difference time-domain (FDTD) calculation results, the maximum EM intensity can be obtained with the length of AuNRs to be 800 nm and the tilting angle of AuNRs to be 71° respectively. The aligned Au nanorod array substrate was fabricated by the OAD process. The two key process parameters, deposition angle, and deposition rate were optimized by experiments, which were 86° and 2 Å/s, respectively. Using 1,2-bis (4-pyridyl) ethylene (BPE) as the probe molecule, the limit of detection (LOD) was characterized to be 10⁻¹¹ M. The AuNRs were also used to detect methamphetamine. The LOD can be down to M (i.e., 14.92 pg/ml), which meet the requirements of the on-site rapid detection of the methamphetamine in human urine (500 ng/ml).

Quasi-Metal for Highly Sensitive and Stable Surface-Enhanced Raman Scattering

Compared with the noble-metal surface-enhanced Raman scattering (SERS) substrates activated by the surface plasmon resonance (SPR)-induced electromagnetic mechanism (EM), the relative low sensitivity and stability of the chemical mechanism (CM)-based substrates are the biggest obstacles to their applications. Herein, we report that quasi-metallic VO₂ nanosheet arrays can be used as a sensitive and stable SERS substrate. The lowest detectable limit of analyte adsorbed on the VO₂ nanosheets achieves 10⁻¹⁰ M and the maximum Raman enhancement factor (EF) reaches 6.7 × 10⁷, which is comparable with that of the noble metals. The experimental and theoretical results demonstrate that the SERS performance of the VO₂ nanosheets comes from the strong interfacial interactions based on charge transfer and the vigorous SPR effects. Our research results demonstrate that quasi-metals are very promising SERS detection platforms and reveal that CM, like EM, contributes significantly to the SERS activity of quasi-metals.

•

Surface-enhanced Raman scattering (SERS) on quasi-metallic VO₂

•

High SERS enhancement factor and low limit of detection have been achieved

•

Synergistic effect of electromagnetic enhancement and chemical enhancement

The Arsenic-Binding Aptamer Cannot Bind Arsenic: Critical Evaluation of Aptamer Selection and Binding

An arsenic-binding aptamer named Ars-3 was reported in 2009, and it has been used for detection of As(III) in more than two dozen papers. In this work, we performed extensive binding assays using isothermal titration calorimetry, various DNA-staining dyes, and gold nanoparticles. By carefully comparing Ars-3 and a few random control DNA sequences, no specific binding of As(III) was observed in each case. Therefore, we conclude that Ars-3 cannot bind As(III). Possible reasons for some of the previously reported binding and detection were speculated to be related to the adsorption of As(III) onto gold surfaces, which were used in many related sensor designs, and As(III)/Au interactions were not considered before. The selection data in the original paper were then analyzed in terms of sequence alignment, secondary structure prediction, and dissociation constant measurement. These steps need rigorous testing before confirming specific binding of newly selected aptamers. This study calls for attention to the gap between aptamer selection and biosensor design, and the gap needs to be filled by careful binding assays to further the growth of the aptamer field.

A Simple and Label-Free Detection of As3+ using 3-nitro-L-tyrosine as an As3+-chelating Ligand

A simple and rapid As³⁺ detection method using 3-nitro-L-tyrosine (N-Tyr) is reported. We discovered the specific property of N-Tyr, which specifically chelates As³⁺. The reaction between As³⁺ and N-Tyr induces a prompt color change to vivid yellow, concomitantly increasing the absorbance at 430 nm. The selectivity for As³⁺ is confirmed by competitive binding experiments with various metal ions (Hg²⁺, Pb²⁺, Cd²⁺, Cr³⁺, Mg²⁺, Ni²⁺, Cu²⁺, Fe²⁺, Ca²⁺, Zn²⁺, and Mn²⁺). Also, the N-Tyr binding site, binding affinity, and As³⁺/N-Tyr reaction stoichiometry are investigated. The specific reaction is utilized to design a sensor that enables the quantitative detection of As³⁺ in the 0.1-100 μM range with good linearity (R² = 0.995). Furthermore, the method's applicability for the analysis of real samples, e.g., tap and river water, is successfully confirmed, with good recoveries (94.32-109.15%) using As³⁺-spiked real water samples. We believe that our discovering and its application for As³⁺ analysis can be effectively utilized in environmental analyses such as those conducted in water management facilities, with simplicity, rapidity, and ease.

Arsenic Speciation on Silver Nanofilms by Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS), as a nondestructive and fast detection technique, is a promising alternative approach for arsenic detection, particularly for in situ applications. SERS-based speciation analysis according to the fingerprint SERS signals of different arsenicals has the potential to provide a superior technique in species preservation over the conventional chromatographic separation methods, albeit with some difficulties due to the similarity in SERS patterns. In this study, we explored a novel SERS method for arsenic speciation by using the separation potential of the coffee ring effect on negatively charged silver nanofilms (AgNFs). Four arsenic species, including arsenite (As^III), arsenate (As^V), monomethylarsonic acid (MMA^V), and dimethylarsinic acid (DMA^V), were measured for fingerprint SERS signals in solution and on the films. Significant enhancement of SERS signals on the dried coffee ring stains by the AgNFs were observed except for As^III, and more importantly, arsenicals migrated varying distances during coffee ring development, promoting better speciation. Sodium dodecyl sulfate was then introduced into the droplet to reduce the droplet surface tension, facilitating the migration of solution into the peripheral region. Under the combined interactions of arsenicals with the AgNFs, solvent, and surfactant, enhanced separation between arsenicals was observed as a result of the formation of two concentric rings. Combining the SERS fingerprint signals and physical separation of arsenicals on the surface, arsenic speciation was achieved using the AgNFs substrate-based SERS technology, demonstrating the potential of the coffee ring effect for rapid separation and analysis of small molecules by SERS.

Adsorption of Arsenite on Gold Nanoparticles Studied with DNA Oligonucleotide Probes

Gold nanoparticles (AuNPs) have been extensively used for detecting arsenite, As(III). Many methods rely on a DNA aptamer that claimed to bind specifically to inorganic arsenic. In these cases, the focus was on arsenic binding to the aptamer, while the potential interactions between As(III) and the AuNP surface were ignored. Herein, a set of spectroscopic and isothermal titration calorimetry (ITC) experiments were conducted to measure the adsorption of As(III) by AuNPs and its competition with DNA adsorption. With 10 mM As(III), 18% of adsorbed DNA was displaced from AuNPs, while preadsorption of only 20 μM As(III) inhibited DNA adsorption by around 50%. The affinity of As(III) on AuNPs is comparable to Br^- and guanosine. ITC and Raman spectroscopy both indicated that only As(III) can be adsorbed, while As(V) had no measurable interactions with the AuNPs. Based on this understanding, a random DNA sequence was used and a similar colorimetric response in the presence of As(III) was observed. This study confirmed the affinity between As(III) and the gold surface. The As(III)/gold interaction is strong enough to affect DNA adsorption, and care should be taken to interpret the observations based on the color change of AuNPs for the detection of As(III).

A review of developments and applications of thin-film microextraction coupled to surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) greatly expands the applications of Raman spectroscopy and is a promising technique for food safety, environmental analysis, and public safety. Thin-film microextraction (TFME) provides an efficient sample preparation method for SERS to improve its selectivity and detection efficiency. This review comprehensively describes the development and applications of SERS and TFME, including the history, mechanisim, and active substrate of SERS and the theory, device, forms, and practical applications of TFME. The applications of TFME-SERS in food safety and environment monitoring are discussed, which could improve their advantages. TFME extracts and enriches the target analytes to eliminate the interfering substance, providing a facial way for SERS to analyze the target analytes in complex matrices. The development of TFME-SERS technology not only expands the application range of TFME, but greatly improves the anti-interference ability and detection sensitivity of SERS. Thus, the established methods are fast, convenient, and highly sensitive. This technology is potential to be applied in the on-site and real-time detection.

Detection of phosphorus species in water: technology and strategies

This review highlights recent advances in methods of detection of total phosphorus in water, including photoelectric strategies, spectroscopy techniques, and modeling algorithms.

Immobilization of ssDNA on a metal–organic framework derived magnetic porous carbon (MPC) composite as a fluorescent sensing platform for the detection of arsenate ions

In this work, we fabricated a metal–organic framework derived magnetic porous carbon (MPC) and with ssDNA achieved specific and efficient recognition of harmful arsenate ions. The detection limit was achieved at 630 pM.

Unique Surface Enhanced Raman Scattering Substrate for the Study of Arsenic Speciation and Detection

In this study, a three-dimensional surface enhanced Raman scattering (SERS) substrate comprised of silver coated gold nanorods (Ag/AuNRs) decorated on electrospun polycaprolactone (PCL) fibers has been applied,  for the first time, to quantitative analytical measurements on various arsenic species: p-arsanilic acid ( pAsA), roxarsone (Rox), and arsenate (As^V), with a demonstrated sensitivity below 5 ppb. As^V detection in a solution of common salt ions has been demonstrated, showing the tolerance of the substrate to more complex environments. pAsA adsorption behavior on the substrate surface has been investigated in detail using these unique SERS substrates. Calculations based on density functional theory (DFT) support the spectral observation for pAsA. This substrate also has been shown to serve as a platform for in situ studies of arsenic desorption and reduction. This SERS substrate is potentially an excellent environmental sensor for both fundamental studies and practical applications.

Surface Plasmon Resonances in Silver Nanostars

The recent development of silver nanostars (Ag-NSs) is promising for improved surface-enhanced sensing and spectroscopy, which may be further exploited if the mechanisms behind the excitation of localized surface plasmon resonances (LSPRs) are identified. Here, we show that LSPRs in Ag-NSs can be obtained with finite-difference time-domain (FDTD) calculations by considering the nanostars as combination of crossed nanorods (Ag-NRs). In particular, we demonstrate that an apparent tail at large wavelengths (λ≳700 nm) observed in the extinction spectra of Ag-NSs is due to a strong dipolar plasmon resonance, with no need to invoke heterogeneity (different number of arms) effects as is normally done in the literature. Our description also indicates a way to tune the strongest LSPR at desired wavelengths, which is useful for sensing applications.

A Colorimetric Probe Based on Functionalized Gold Nanorods for Sensitive and Selective Detection of As(III) Ions

A colorimetric probe for determination of As(III) ions in aqueous solutions on basis of localized surface plasmon resonance (LSPR) was synthesized. The dithiothreitol molecules with two end thiols covalently combined with Au Nanorods (AuNRs) with an aspect ratio of 2.9 by Au-S bond to form dithiothreitol coated Au Nanorods (DTT-AuNRs), acting as colorimetric probe for the determination of As(III) ions. With the adding of As(III) ions, the AuNRs will be aggregated and leading the longitudinal SPR absorption band of DTT-AuNRs decrease due to the As(III) ions can bind with three DTT molecules through an As-S linkage. The potential factors affect the response of DTT-AuNRs to As(III) ions including the concentration of DTT, pH values of DTT-AuNRs, reaction time and NaCl concentration were optimized. Under optimum assay conditions, the DTT-AuNRs colorimetric probe has high sensitivity towards As(III) ions with low detection limit of 38 nM by rules of 3σ/k and excellent linear range of 0.13–10.01 μM. The developed colorimetric probe shows high selectivity for As(III) ions sensing and has applied to determine of As(III) in environmental water samples with quantitative spike-recoveries range from 95.2% to 100.4% with low relative standard deviation of less than 4.4% (n = 3).

Ultrasensitive aptamer biosensor for arsenic (III) detection based on label-free triple-helix molecular switch and fluorescence sensing platform

Arsenic ion is a well-known harmful heavy element widely existing in the environment. Arsenic pollution occurring frequently has become increasing a serious worldwide threat to human health and the environment. The development of sensitive and reliable methods to detect As³⁺ in water is of great importance to biochemical research and monitoring applications. Herein, a label-free fluorescence sensing platform was elaborately designed for As³⁺ monitoring using exonuclease III (Exo III)-assisted cascade target recycling amplification strategy. The triple-helix molecular switch was employed as the sensing element and 2-amino-5,6,7-trimethyl-1,8-naphthyridine was used as the signal indicator. The resulting biosensor is simple, ultrasensitive, and exhibits a limit of detection of 5 ng/L with high selectivity. Meanwhile, the proposed sensor is successfully applied to determination of As³⁺ in practical sample analysis (tap water, lake water and pond water). The results shown herein have important implications in the development of new fluorescent sensors for the fast, easy, and selective detection and quantification of As³⁺ in water samples. More importantly, the proposed platform can be extended to detect other heavy metal ions with newly designed triple-helix molecular switch, as well as pesticide residue, antibiotic residues, and biomarkers by using aptamer sequences.