Force-Encoding DNA Nanomachines for Simultaneous and Direct Detection of Multiple Pathogenic Bacteria in Blood

Pathogen detection is growing in importance in the early stages of bacterial infection and treatment due to the significant morbidity and mortality associated with bloodstream infections. Although various diagnostic approaches for pathogen detection have been proposed, most of them are time-consuming, with insufficient sensitivity and limited specificity and multiplexing capability for clinical use. Here, we report a force-encoding DNA nanomachine for simultaneous and high-throughput detection of multiple pathogens in blood through force-induced remnant magnetization spectroscopy (FIRMS). The force-encoding DNA nanomachines coupled with DNA walkers enable analytical sensitivity down to a single bacterium via a cascade signal amplification strategy. More importantly, it allows for rapid and specific profiling of various pathogens directly in blood samples, without being affected by factors such as light color and solution properties. We expect that this magnetic sensing platform holds great promise for various applications in biomedical research and clinical diagnostics.

Force-Coded Strategy for the Simultaneous Detection of Multiple Tumor-Related Proteins

Multiplexed simultaneous detection of various cancer markers is required for accurate diagnosis and treatment of early cancer. In this work, we present a force-coded strategy for the simultaneous detection of tumor-related proteins with tunable dynamic range via magnetic sensing. The multiplexing capability of this method is achieved by designing DNA devices that can recognize different biomarkers and code them with different binding forces measured by the force-induced remnant magnetization spectroscopy, which is not influenced by the color of the light and the solution. Moreover, the force-coded assay with high sensitivity and adjustable detection range is robust, which could be used for practical biological applications such as magnetic sensing, handheld miniaturized systems, and potential in vivo diagnosis.

Advances in the Biological Application of Force-Induced Remnant Magnetization Spectroscopy

Biomolecules participate in various physiological and pathological processes through intermolecular interactions generally driven by non-covalent forces. In the present review, the force-induced remnant magnetization spectroscopy (FIRMS) is described and illustrated as a novel method to measure non-covalent forces. During the FIRMS measurement, the molecular magnetic probes are magnetized to produce an overall magnetization signal. The dissociation under the interference of external force yields a decrease in the magnetic signal, which is recorded and collected by atomic magnetometer in a spectrum to study the biological interactions. Furthermore, the recent FIRMS development with various external mechanical forces and magnetic probes is summarized.

Nanoprobe-based force spectroscopy as a versatile platform for probing the mechanical adhesion of bacteria

The first stage of biofilm-associated infections is commonly caused by initial adhesion of bacteria to intravascular tubes, catheters and other medical devices. The overuse of antibiotics to treat these infections has led to the spread of antibiotic resistance, which has made infections difficult to eradicate. It is crucial to develop advanced strategies to inhibit biofilm formation, avoiding the emergence of antibiotic resistance. Previously, it has been reported that substrate stiffness plays an important role in the initial attachment of bacteria. However, the mechanism of how the stiffness modulates the initial adhesion of bacteria remains unclear. Here, we developed magnetic nanoprobe-based force-induced remnant magnetization spectroscopy (FIRMS) as a new platform to measure the adhesion force of bacteria. Through examining the initial adhesion force and the adhesive protein, fibronectin-binding protein (FnBP), of Staphylococcus aureus (S. aureus), we found that the increase of the substrate stiffness promoted the expression of FnBP, thus enhancing the initial adhesion force of bacteria. Following the formation of initial adhesion, the substrates with soft stiffness delayed the biofilm formation, whereas those with moderate stiffness showed preferential promotion of the biofilm formation. We expect this versatile platform to be beneficial to the study of adhesion behaviors of bacteria that sheds light on the design of new medical materials to treat microbial infections.

Direct Measurement of Through-Bond Effects in Molecular Multivalent Interactions

Multivalent interactions occur throughout biology, and have a number of characteristics that monovalent interactions do not. However, it remains challenging to directly measure the binding force of molecular multivalent interactions and identify the mechanism of interactions. In this study, the specific interaction between bivalent aptamer and thrombin has been measured directly and quantitatively by force-induced remnant magnetization spectroscopy to investigate the binding force and through-bond effects of the multivalent interactions. The measured differential binding forces enable through-bond effects in thrombin-aptamer complexes to be identified, where aptamer binding at exosite II produces visible effects on their binding at exosite I and vice versa. This method might be suitable for practical applications in the design of high-performance ligands.

Regulatory-sequence mechanical biosensor: A versatile platform for investigation of G-quadruplex/label-free protein interactions and tunable protein detection

Mechanical biosensors can be used to quantitatively explore DNA-protein binding mechanisms by detecting targets at low concentrations or measuring force in single-molecule force spectroscopy. However, restrictions in single-molecule manipulation and labelling protocols have hindered the application for bulk analysis of label-free protein detection. Here, we present the integration of molecular force measurement and finely tunable detection of label-free proteins into one mechanical sensor. Regulatory-sequence force spectroscopy was obtained to investigate the binding force of DNA G-quadruplexes (GQ) and label-free protein. The dual control of regulatory sequences and mechanical forces induces the structure switching from DNA duplex to GQ/protein complex. It exhibits a synergistic effect, enabling the rational fine-tuning of the dynamic range for biosensing protein concentrations over eight orders of magnitude. Furthermore, this method was exploited to estimate the stability of the human telomeric DNA GQ by Ku protein and ligand methylpyridostatin. The results revealed that human telomeric GQ has two different binding sites for Ku protein and ligand. Force spectroscopy integrating label-free force measurement and tunable target detection holds great promise for use in biosensing, drug screening, targeted therapies, DNA nanotechnology, and fields in which GQ are of rapidly increasing importance.

Insulin-like growth factor type I selectively binds to G-quadruplex structures

BACKGROUND

G-quadruplex has been viewed as a promising therapeutic target in oncology due to its potentially important roles in physiological and pathological processes. Emerging evidence suggests that the biological functions of G-quadruplexes are closely related to the binding of some proteins. Insulin-like growth factor type I (IGF-1), as a significant modulator of cell growth and development, may serve as a quadruplex-binding protein.

METHODS

The binding affinity and selectivity of IGF-1 to different DNA motifs in solution were measured by using fluorescence spectroscopy, Surface Plasmon Resonance (SPR), and force-induced remnant magnetization (FIRM). The effects of IGF-1 on the formation and stability of G-quadruplex structures were evaluated by circular dichroism (CD) and melting fluorescence resonance energy transfer (FRET) spectroscopy. The influence of quadruplex-specific ligands on the binding of G-quadruplexes with IGF-1 was determined by FIRM.

RESULTS

IGF-1 shows a binding specificity for G-quadruplex structures, especially the G-quadruplex structure with a parallel topology. The quadruplex-specific ligands TMPyP4 and PDS (Pyridostatin) can inhibit the interaction between G-quadruplexes and proteins.

CONCLUSIONS

IGF-1 is demonstrated to selectively bind with G-quadruplex structures. The use of quadruplex-interactive ligands could modulate the binding of IGF-1 to G-quadruplexes.

GENERAL SIGNIFICANCE

This study provides us with a new perspective to understand the possible physiological relationship between IGF-1 and G-quadruplexes and also conveys a strategy to regulate the interaction between G-quadruplex DNA and proteins.

Nanopurpurin-based photodynamic therapy destructs extracellular matrix against intractable tumor metastasis

Nanomaterials-based photodynamic therapy (PDT) has been used to treat malignant cells. However, the intrinsic impact of nanomaterials-based PDT on mechanical properties of intractable tumor cells is not well understood. Herein, we demonstrated that the mechanical forces of Taxol-resistant tumor cells were decreased by nanopurpurin-based PDT destructing extracellular matrix (ECM), increasing therapy sensitivity and repressing tumor metastasis. Combining FIRMS and general confocal microscope, we observed that the disruption of ECM by photodynamic reaction of P18-nanoconfined liposome (P18⊂L) induced a decrease of adhesion force and biomechanical properties of Taxol-resistant cells through the attenuation of actomyosin-based contractility thereby inhibiting cell migration and metastasis in vivo. Moreover, the destroyed ECM by P18⊂L PDT increased the therapy sensitivity. A clearer understanding of the effect of nanopurpurin-based PDT on mechanical properties and behaviors of intractable tumor cells will provide new and important basis for developing new therapeutic strategies.

Super-resolution force spectroscopy reveals ribosomal motion at sub-nucleotide steps

Probing biomolecular motion beyond a single nucleotide is technically challenging but fundamentally significant. We have developed super-resolution force spectroscopy (SURFS) with 0.5 pN force resolution and revealed that the ribosome moves by half a nucleotide upon the formation of the pre-translocation complex, which is beyond the resolution of other techniques.

Magnetic Sensing Potential of Fe3O4 Nanocubes Exceeds That of Fe3O4 Nanospheres

This paper highlights the relation between the shape of iron oxide (Fe₃O₄) particles and their magnetic sensing ability. We synthesized Fe₃O₄ nanocubes and nanospheres having tunable sizes via solvothermal and thermal decomposition synthesis reactions, respectively, to obtain samples in which the volumes and body diagonals/diameters were equivalent. Vibrating sample magnetometry (VSM) data showed that the saturation magnetization (M_s) and coercivity of 100-225 nm cubic magnetic nanoparticles (MNPs) were, respectively, 1.4-3.0 and 1.1-8.4 times those of spherical MNPs on a same-volume and same-body diagonal/diameter basis. The Curie temperature for the cubic Fe₃O₄ MNPs for each size was also higher than that of the corresponding spherical MNPs; furthermore, the cubic Fe₃O₄ MNPs were more crystalline than the corresponding spherical MNPs. For applications relying on both higher contact area and enhanced magnetic properties, higher-M_s Fe₃O₄ nanocubes offer distinct advantages over Fe₃O₄ nanospheres of the same-volume or same-body diagonal/diameter. We evaluated the sensing potential of our synthesized MNPs using giant magnetoresistive (GMR) sensing and force-induced remnant magnetization spectroscopy (FIRMS). Preliminary data obtained by GMR sensing confirmed that the nanocubes exhibited a distinct sensitivity advantage over the nanospheres. Similarly, FIRMS data showed that when subjected to the same force at the same initial concentration, a greater number of nanocubes remained bound to the sensor surface because of higher surface contact area. Because greater binding and higher M_s translate to stronger signal and better analytical sensitivity, nanocubes are an attractive alternative to nanospheres in sensing applications.

Biosensing Using Magnetic Particle Detection Techniques

Magnetic particles are widely used as signal labels in a variety of biological sensing applications, such as molecular detection and related strategies that rely on ligand-receptor binding. In this review, we explore the fundamental concepts involved in designing magnetic particles for biosensing applications and the techniques used to detect them. First, we briefly describe the magnetic properties that are important for bio-sensing applications and highlight the associated key parameters (such as the starting materials, size, functionalization methods, and bio-conjugation strategies). Subsequently, we focus on magnetic sensing applications that utilize several types of magnetic detection techniques: spintronic sensors, nuclear magnetic resonance (NMR) sensors, superconducting quantum interference devices (SQUIDs), sensors based on the atomic magnetometer (AM), and others. From the studies reported, we note that the size of the MPs is one of the most important factors in choosing a sensing technique.

Quantitatively resolving multivalent interactions on a macroscopic scale using force spectroscopy

Multivalent interactions remain difficult to be characterized and consequently controlled, particularly on a macroscopic scale. Using force-induced remnant magnetization spectroscopy (FIRMS), we have resolved the single-, double-, and triple-biotin-streptavidin interactions, multivalent DNA interactions and CXCL12-CXCR4 interactions on millimetre-scale surfaces. Our results establish FIRMS as a viable method for systematic resolution and controlled formation of multivalent interactions.

Quantitatively Resolving Ligand-Receptor Bonds on Cell Surfaces Using Force-Induced Remnant Magnetization Spectroscopy

Molecule-specific noncovalent bonding on cell surfaces is the foundation for cellular recognition and functioning. A major challenge in probing these bonds is to resolve the specific bonds quantitatively and efficiently from the nonspecific interactions in a complex environment. Using force-induced remnant magnetization spectroscopy (FIRMS), we were able to resolve quantitatively three different interactions for magnetic beads bearing anti-CD4 antibodies with CD4(+) T cell surfaces based upon their binding forces. The binding force of the CD4 antibody-antigen bonds was determined to be 75 ± 3 pN. For comparison, the same bonds were also studied on a functionalized substrate surface, and the binding force was determined to be 90 ± 6 pN. The 15 pN difference revealed by high-resolution FIRMS illustrates the significant impact of the bonding environment. Because the force difference was unaffected by the cell number or the receptor density on the substrate, we attributed it to the possible conformational or local environmental differences of the CD4 antigens between the cell surface and substrate surface. Our results show that the high force resolution and detection efficiency afforded by FIRMS are valuable for studying protein-protein interactions on cell surfaces.

Mechanically resolving noncovalent bonds using acoustic radiation force

The resolution of molecular bonds and subsequent selective control of their binding are of great significance in chemistry and biology. We have developed a method based on the use of acoustic radiation force to precisely dissociate noncovalent molecular bonds. The acoustic radiation force is produced by extremely low-power ultrasound waves and is mediated by magnetic particles. We successfully distinguished the binding of antibodies of different subclasses and the binding of DNA duplexes with a single-base-pair difference. In contrast to most ultrasound applications in chemistry, the sonication probe is noninvasive and requires a sample volume of only a few microliters. Our method is thus viable for noninvasive and accurate control of molecular bonds that are widely encountered in biochemistry.

Applications of optically detected MRI for enhanced contrast and penetration in metal

We report quantitative measurements using optically detected magnetic resonance imaging (MRI) for enhanced pH contrast and flow inside porous metals. Using a gadolinium chelate as the pH contrast agent, we show the response is 0.6s(-1) mM(-1) per pH unit at the ambient magnetic field for the pH range 6-8.5. A stopped flow scheme was used to directly measure T(1) relaxation time to determine the relaxivity. Flow profiles and images were obtained for a series of porous metals with different average pore sizes. The signal amplitudes and spatial distributions were compared. A clogged region in one of the samples was revealed using optically detected MRI but not optical imaging or scanning electron microscopy. These applications will significantly broaden the impact of optically detected MRI in chemical imaging and materials research.

Note: Detection of a single cobalt microparticle with a microfabricated atomic magnetometer

We present magnetic detection of a single, 2 μm diameter cobalt microparticle using an atomic magnetometer based on a microfabricated vapor cell. These results represent an improvement by a factor of 10(5) in terms of the detected magnetic moment over previous work using atomic magnetometers to detect magnetic microparticles. The improved sensitivity is due largely to the use of small vapor cells. In an optimized setup, we predict detection limits of 0.17 μm(3).