Heterogeneously catalyzed synthesis of primary amides directly from primary alcohols and aqueous ammonia

Phenalenyl-ruthenium synergism for effectual catalytic transformations of primary amines to amides

The synthesis of amides holds great promise owing to their impeccable contributions as building blocks for highly valued functional derivatives. Herein, we disclose the design, synthesis and crystal structure of a mixed-ligand ruthenium(II) complex, [Ru(η6-Cym)(O,O-PLY)Cl], (1) where Cym = 1-isopropyl-4-methyl-benzene and O,O-PLY = deprotonated form of 9-hydroxy phenalenone (HO,O-PLY). The complex catalyzes the aerobic oxidation of various primary amines (RCH2NH2) to value-added amides (RCONH2) with excellent selectivity and efficiency under relatively mild conditions with common organic functional group tolerance. Structural, electrochemical, spectroscopic, and computational studies substantiate that the synergism between the redox-active ruthenium and π-Lewis acidic PLY moieties facilitate the catalytic oxidation of amines to amides. Additionally, the isolation and characterization of key intermediates during catalysis confirm two successive dehydrogenation steps leading to nitrile, which subsequently transform to the desired amide through hydration. The present synthetic approach is also extended to substitution-dependent tuning at PLY to tune the electronic nature of 1 and to assess substituent-mediated catalytic performance. The effect of substitution at the PLY moiety (5th position) leads to structural isomers, which were further evaluated for the catalytic transformations of amine to amides under similar reaction conditions.

Sustainable Electrosynthesis of N,N-Dimethylformamide via Relay Catalysis on Synergistic Active Sites

Electrified synthesis of high-value organonitrogen chemicals from low-cost carbon- and nitrogen-based feedstocks offers an economically and environmentally appealing alternative to traditional thermocatalytic methods. However, the intricate electrochemical reactions at electrode surfaces pose significant challenges in controlling selectivity and activity, especially for producing complex substances such as N,N-dimethylformamide (DMF). Herein, we tackle this challenge by developing relay catalysis for efficient DMF production using a composite WO2-NiOOH/Ni catalyst with two distinctive active sites. Specifically, WO2 selectively promotes dimethylamine (DMA) electrooxidation to produce strongly surface-bound (CH3)2N*, while nearby NiOOH facilitates methanol electrooxidation to yield more weakly bound *CHO. The disparity in binding energetics of the key C- and N-intermediates expedites C-N coupling at the WO2-NiOOH interface. In situ infrared spectroscopy with isotope-labeling experiments, quasi-in situ electron paramagnetic resonance trapping experiments, and electrochemical operating experiments revealed the C-N coupling mechanism and enhanced DMF-synthesis selectivity and activity. In situ X-ray absorption spectroscopy (XAS) and postreaction transmission electron microscopy (TEM) studies verified the stability of WO2-NiOOH/Ni during extended electrochemical operation. A Faradaic efficiency of ∼50% and a production rate of 438 μmol cm-2 h-1 were achieved at an industrially relevant current density of 100 mA cm-2 over an 80 h DMF production period. This study introduces a new paradigm for developing electrothermo relay catalysis for the sustainable and efficient synthesis of valuable organic chemicals with industrial potential.

Synthesis of Amides via the Amination of Aldehydes with Hydroxylamines Promoted by TBAF·3H2O

A metal-free, mild, and efficient method for the synthesis of amides has been developed from the amination of aldehydes with hydroxylamines promoted by TBAF·3H2O in the presence of KOH. Control experiments showed that the nitrone was the intermediate of this amination. By this method, a series of amides, biologically active compounds bebenil and a COX inhibitor were obtained in moderate to good yields.

Formamide Electrosynthesis from Methanol and Ammonia in Water over Pr-Doped MnO2

A rare earth element doping strategy is reported to boost the activity and enhance the stability of MnO2 for selective formamide production through electrocatalytic oxidation coupling (EOC) of methanol and ammonia. MnO2 doped with 1% Pr was selected as the best candidate with an optimized formamide yield of 211.32 μmol cm-2 h-1, a Faradaic efficiency of 22.63%, and a stability of more than 50 h. The easier formation of Mn6+ species and the lower dissolution rate of Mn species over Pr-doped MnO2 revealed by in situ Raman spectra were responsible for the boosted formamide production and enhanced stability. In addition, a two-electrode flow electrolyzer was developed to integrate EOC with C2H2 semihydrogenation for simultaneously producing value-added products in both the anode and cathode.

Exploring the Versatility of the Amidation of Aryl Acid Fluorides using the Germylamines R3 GeNMe2

The formation of amide bonds is an important process since this linkage is an essential component in proteins, pharmaceuticals, and other medicinally and biologically significant molecules. Recently, it was demonstrated that germylamines R3 GeNR'2 were useful reagents for the conversion of acid fluorides to amides. This transformation occurs readily at room temperature and has a low activation energy. In the present study, the versatility of this amidation reaction with aryl acid fluorides is investigated. A series of thirteen acid fluorides with various substituents on the aromatic ring were reacted with the germylamine Ph3 GeNMe2 and twelve of these were converted to the corresponding amides in high yields, the exception being 1,4-benzenedicarbonyl difluoride. The germylamines Bun 3 GeNMe2 and Pri 3 GeNMe2 also could be used for this interconversion, and both of these species successfully converted 1,4-benzenedicarbonyl difluoride to the corresponding amide. In addition, the crystal structure of Ph3 GeNMe2 is reported. This represents one of only three crystallographically characterized germylamines. The synthesis and 19 F NMR characterization of three fluorogermanes R3 GeF (R=Bun , Pri , and Mes) are also reported herein.

KOH-promoted cascade C-Cl bond activation and amidation of trichloromethyl aromatic compounds with formamides in water

A KOH-promoted cascade C-Cl bond activation and amidation of trichloromethyl aromatic compounds with formamides using water as a solvent has been developed. This methodology suggested an alternative synthetic approach for the synthesis of aryl amide compounds in the absence of catalysts, additives and organic solvents. In addition, the yields of gram-scale reactions are good and provide a basis for synthetic application.

Electrochemical C-N coupling of CO2 and nitrogenous small molecules for the electrosynthesis of organonitrogen compounds

Electrochemical C-N coupling reactions based on abundant small molecules (such as CO₂ and N₂) have attracted increasing attention as a new "green synthetic strategy" for the synthesis of organonitrogen compounds, which have been widely used in organic synthesis, materials chemistry, and biochemistry. The traditional technology employed for the synthesis of organonitrogen compounds containing C-N bonds often requires the addition of metal reagents or oxidants under harsh conditions with high energy consumption and environmental concerns. By contrast, electrosynthesis avoids the use of other reducing agents or oxidants by utilizing "electrons", which are the cleanest "reagent" and can reduce the generation of by-products, consistent with the atomic economy and green chemistry. In this study, we present a comprehensive review on the electrosynthesis of high value-added organonitrogens from the abundant CO₂ and nitrogenous small molecules (N₂, NO, NO₂^-, NO₃^-, NH₃, etc.) via the C-N coupling reaction. The associated fundamental concepts, theoretical models, emerging electrocatalysts, and value-added target products, together with the current challenges and future opportunities are discussed. This critical review will greatly increase the understanding of electrochemical C-N coupling reactions, and thus attract research interest in the fixation of carbon and nitrogen.

Cyclotrimetaphosphate-assisted ruthenium catalyst for the hydration of nitriles and oxidation of primary amines to amides under aerobic conditions in water

Amide bonds are ubiquitous and regarded as an essential constituent of many biologically active drug molecules and fine chemicals. We report a practical and operationally simple ruthenium-based catalytic system for the hydration of nitriles and aerobic oxidation of primary amines to the corresponding amides. Both reactions proceed without any external oxidant in water under aerobic conditions and exhibit a broad substrate scope. The mechanistic investigation was executed with the aid of control experiments and kinetic and spectroscopic studies of the reaction mixture.

Oxidative Cleavage and Ammoxidation of Unsaturated Hydrocarbons via Heterogeneous Auto-Tandem Catalysis

The oxidative cleavage and functionalization of unsaturated C-C bonds are important processes for synthesis of carbonyl compounds from hydrocarbon feedstocks, yet there has been no report of direct amidation of unsaturated hydrocarbons via an oxidative cleavage of unsaturated C-C bonds with molecular oxygen as an environmentally benign oxidant. Herein, for the first time, we describe a manganese oxide-catalyzed auto-tandem catalysis strategy that enables direct synthesis of amides from unsaturated hydrocarbons by coupling oxidative cleavage with amidation. With oxygen as an oxidant and ammonia as a nitrogen source, a wide range of structurally diverse mono- and multisubstituted activated and unactivated alkenes or alkynes can smoothly undergo unsaturated C-C bond cleavage to deliver one- or multiple-carbon shorter amides. Moreover, a slight modification of the reaction conditions also allows for the direct synthesis of sterically hindered nitriles from alkenes or alkynes. This protocol features excellent functional group tolerance, a broad substrate scope, flexible late-stage functionalization, facile scalability, and a cost-effective and recyclable catalyst. Detailed characterizations reveal that the high activity and selectivity of the manganese oxides are attributed to the large specific surface area, abundant oxygen vacancies, better reducibility, and moderate acid sites. Mechanistic studies and density functional theory calculations indicate that the reaction proceeds through divergent pathways depending on the structure of substrates.

Solvent-controlled amidation of acid chlorides at room temperature: new route to access aromatic primary amides and imides amenable for late-stage functionalization†

Herein, we report a solvent-controlled highly selective amidation and imidation of aroyl chlorides using an alkali-metal silyl-amide reagent (LiHMDS), which serves as a nitrogen source at room temperature. A unique feature of this method lies in the sequential silyl amidation of aryol chlorides and nitrogen–silicon bond cleavage of the corresponding N,N-bis(trimethylsilyl)benzamide in a one-pot method in a very short reaction time. This effective strategy was extended to late-stage functionalization.

Herein, we report a solvent-controlled highly selective amidation and imidation of aroyl chlorides using an alkali-metal silyl-amide reagent (LiHMDS), which serves as a nitrogen source at room temperature.

Transamidation of aromatic amines with formamides using cyclic dihydrogen tetrametaphosphate

Amide fragments are found to be one of the key constituents in a wide range of natural products and pharmacologically active compounds. Herein, we report a simple and efficient procedure for transamidation with a cyclic dihydrogen tetrametaphosphate. The protocol is simple, does not require any additives, and encompasses a broad substrate scope. To comprehend the mechanism of the present methodology, detailed spectroscopic and kinetic studies were undertaken.

Electrosynthesis of formamide from methanol and ammonia under ambient conditions

Electrochemical conversion of abundant carbon- and nitrogen-containing small molecules into high-valued organonitrogen compounds is alluring to reducing current dependence on fossil energy. Here we report a single-cell electrochemical oxidation approach to transform methanol and ammonia into formamide under ambient conditions over Pt electrocatalyst that provides 74.26% selectivity from methanol to formamide and a Faradaic efficiency of 40.39% at 100 mA cm⁻² current density, gaining an economic advantage over conventional manufacturing based on techno-economic analysis. A 46-h continuous test performed in the flow cell shows no performance decay. The combined results of in situ experiments and theoretical simulations unveil the C–N bond formation mechanism via nucleophilic attack of NH₃ on an aldehyde-like intermediate derived from methanol electrooxidation. This work offers a way to synthesize formamide via C–N coupling and can be extended to substantially synthesize other value-added organonitrogen chemicals (e.g., acetamide, propenamide, formyl methylamine).

Developing a sustainable manufacturing method using biomass-derived feedstock at ambient conditions is highly desirable. Here the authors report electrooxidation route for synthesis of formamide from methanol and ammonia in water

Protocol for the preparation of amorphous manganese oxide and its application as heterogeneous catalyst in the direct synthesis of amides and nitriles

The cleavage and functionalization of carbon-carbon (C–C) bonds has emerged as a powerful tool for preparing value-added chemicals. In this protocol, we describe the preparation of amorphous manganese oxide and its application as a heterogeneous catalyst in the direct synthesis of amides via successive cleavage and amidation of C–C bonds in alcohols. Furthermore, we describe how a slight modification of reaction conditions allows for the cleavage and cyanation of alcohols to access sterically hindered nitriles.

For complete details on the use and execution of this protocol, please refer to He et al. (2022).

•

Heterogeneous MnO_x-catalyzed cleavage and amidation/cyanation of alcohols

•

Convenient preparation of MnO_x in large scale

•

Recycling and reusing of MnO_x

•

Wide substrate scope and gram-scale synthesis allowable

Publisher’s note: Undertaking any experimental protocol requires adherence to local institutional guidelines for laboratory safety and ethics.

Acceptorless dehydrogenative synthesis of primary amides from alcohols and ammonia

The highly desirable synthesis of the widely-used primary amides directly from alcohols and ammonia via acceptorless dehydrogenative coupling represents a clean, atom-economical, sustainable process. Nevertheless, such a reaction has not been previously reported, and the existing catalytic systems instead generate other N-containing products, e.g., amines, imines and nitriles. Herein, we demonstrate an efficient and selective ruthenium-catalyzed synthesis of primary amides from alcohols and ammonia gas, accompanied by H2 liberation. Various aliphatic and aromatic primary amides were synthesized in high yields, with no observable N-containing byproducts. The selectivity of this system toward primary amide formation is rationalized through density functional theory (DFT) calculations, which show that dehydrogenation of the hemiaminal intermediate into primary amide is energetically favored over its dehydration into imine.

Vanadium-catalyzed Oxidative Conversion of Primary Aromatic Alcohols into Amides and Nitriles with Molecular Oxygen

Amides or nitriles are important building blocks because of the widespread occurrence in chemistry and biology. The development of green and efficient catalytic approaches to introduce nitrogen functionality is highly desired. Herein a vanadium-based material V-N-C-700 was prepared via a simple and convenient method, and employed for liquid-phase catalytic ammoxidation of alcohols with molecular oxygen. By using V-N-C-700/2-picolinic acid, primary aromatic alcohols was smoothly converted into the amides and nitriles in the presence of urea. The corresponding aldehydes are the key intermediates, and 2-picolinic acid could significantly enhance oxidation of alcohols into aldehydes. The amides were formed simultaneously along with nitriles, rather than only from nitriles via successive hydration. This work further expands non-noble metal catalysts for the preparation of amides and nitriles.

Single-pot tandem oxidative/C-H modification amidation process using ultrasmall PdNP-encapsulated porous organosilica nanotubes

Herein, we studied a single-pot method with a dual catalysis process towards the conversion of primary aromatic alcohols to amides using ultrasmall PdNPs of controlled uniform size (1.8 nm) inside hybrid mesoporous organosilica nanotubes (MO-NTs). The catalyst exhibited excellent performance in water under mild conditions and showed high stability. The catalytic activity towards the tandem oxidation of alcohols in the presence of amine salts and H2O2 to their corresponding amides without producing byproducts was evaluated, and high yields were obtained for all products. The structure of the organosilica nanotubes containing palladium nanoparticles was investigated using various characterization techniques such as XRD, TEM, BET, solid-state 29Si NMR and solid-state 13C CP MAS NMR. Catalyst recycling tests showed that the catalytic power of PdNPs@B-SNTs was preserved after 8 cycles and a slight decrease in catalyst activity was observed.

Acetylation of alcohols and amines under visible light irradiation: diacetyl as an acylation reagent and photosensitizer

An unprecedented strategy for the acetylation of alcohols and amines using diacetyl as both an acylation reagent and a photosensitizer was well developed.

Aprotic Amine-modified Manganese Dioxide Catalysts for Selectivity-tunable Oxidation of Amines

Organic modifiers have shown promising potential for regulating the activity and selectivity of heterogeneous catalysts via tuning their surface properties. Despite the increasing application of organic modification technique in regulating the redox-acid catalysis of metal oxides, control of the acidity of metal oxide catalysts for enhanced reaction selectivity without sacrificing their redox activity remains a substantial challenge. Herein, we show the successful control of redox-acid catalysis of metal oxides with aprotic tertiary amine modifiers. Robust modification of manganese dioxide catalysts with N,N-dialkylcyclohexylamine selectively blocks the Lewis acid sites, with their redox activity mostly unaffected. This enables efficient synthesis of imines in high to excellent selectivity via aerobic oxidation of structurally diverse aryl amines.

Ring Opening/Site Selective Cleavage in N-Acyl Glutarimide to Synthesize Primary Amides

A LiOH-promoted hydrolysis selective C-N cleavage of twisted N-acyl glutarimide for the synthesis of primary amides under mild conditions has been developed. The reaction is triggered by a ring opening of glutarimide followed by C-N cleavage to afford primary amides using 2 equiv of LiOH as the base at room temperature. The efficacy of the reactions was considered and administrated for various aryl and alkyl substituents in good yield with high selectivity. Moreover, gram-scale synthesis of primary amides using a continuous flow method was achieved. It is noted that our new methodology can apply under both batch and flow conditions for synthetic and industrial applications.

Selective Utilization of N-acetyl Groups in Chitin for Transamidation of Amines

The selective transformation of chitin into various renewable N-containing chemicals and medicines has attracted increasing attention. However, the N-acetyl groups in chitin construct strong hydrogen bond networks, which restricts its depolymerization and transformation. The selective conversion of robust chitin commonly requires considerable base catalysts to remove the N-acetyl group as a byproduct in advance, which is non-compliance with the principle of atomic economy. Herein, for the first time we demonstrate a novel approach to achieve the selective utilization of the N-acetyl group in chitin for transamidation of chitin with amines. A series of amine derivatives, mainly including aliphatic amine, cyclic amine and functionalized aromatic amine, could be selectively converted into the corresponding amide products frequently found in pharmaceuticals. Furthermore, the solid residue after removing the acetyl group (denoted as De-chitin) with the sufficient exposure of -NH2 groups as a solid base catalyst shows excellent performance in the aldol condensation reaction of furfural and acetone to produce fuel precursors. Our process provides a strategy that exploiting every functional group adequately in substrates to obtain value-added chemicals.

Aerobic oxidation of primary amines to amides catalyzed by an annulated mesoionic carbene (MIC) stabilized Ru complex

A Ru complex, stabilized by an annulated mesoionic carbene ligand, catalyzes the aerobic oxidation of a host of primary amines to amides in high yields and excellent selectivity. Kinetics, Hammett and DFT studies provide mechanistic insight.

Direct synthesis of amides from nonactivated carboxylic acids using urea as nitrogen source and Mg(NO3)2 or imidazole as catalysts

A new method for the direct synthesis of primary and secondary amides from carboxylic acids is described using Mg(NO3)2·6H2O or imidazole as a low-cost and readily available catalyst, and urea as a stable, and easy to manipulate nitrogen source. This methodology is particularly useful for the direct synthesis of primary and methyl amides avoiding the use of ammonia and methylamine gas which can be tedious to manipulate. Furthermore, the transformation does not require the employment of coupling or activating agents which are commonly required.

Aerobic oxidation of primary benzylic amines to amides and nitriles catalyzed by ruthenium carbonyl clusters carrying N,O-bidentate ligands

Four trinuclear ruthenium carbonyl clusters, (6-BrPyCHRO)₂Ru₃(CO)₈ (R = 4-OCH₃C₆H₄, 1a; R = 4-BrC₆H₄, 1b) and (2-OC₆H₄-HC[double bond, length as m-dash]N-C₆H₄R)₂Ru₃(CO)₈ (R = 4-OCH₃, 2a; R = 4-Br, 2b), were synthesized from the reactions of Ru₃(CO)₁₂ with the corresponding N,O-bidentate ligands (two pyridyl alcohols and two Schiff bases) respectively in a ratio of 1 : 2. Three new complexes 1b, 2a and 2b have been fully characterized by elemental analysis, FT-IR, NMR and X-ray crystallography. The catalytic activity of these ruthenium complexes for the aerobic oxidation of primary benzylic amines to amides and nitriles in the presence of t-BuOK was investigated, of which the Schiff base complex 2a was found to exhibit the highest activity.

Visible-light-driven catalytic oxidation of aldehydes and alcohols to nitriles by 4-acetamido-TEMPO using ammonium carbamate as a nitrogen source

A mild and efficient route to prepare nitriles from aldehydes by combining photoredox catalysis with oxoammonium cations is reported. The reaction is performed using ammonium carbamate as the nitrogen source. The practicality of the method is increased by the extension of the dual catalytic system to one-pot two-step conversion of alcohols to nitriles.

(Ar-tpy)RuII(ACN)3: A Water-Soluble Catalyst for Aldehyde Amidation, Olefin Oxo-Scissoring, and Alkyne Oxygenation

The synthetic chemists always look for developing new catalysts, sustainable catalysis, and their applications in various organic transformations. Herein, we report a new class of water-soluble complexes, (Ar-tpy)Ru^II(ACN)₃, utilizing designed terpyridines possessing electron-donating and -withdrawing aromatic residues for tuning the catalytic activity of the Ru(II) complex. These complexes displayed excellent catalytic activity for several oxidative organic transformations including late-stage C-H functionalization of aldehydes with NH₂OR to valuable primary amides in nonconventional aqueous media with excellent yield. Its diverse catalytic power was established for direct oxo-scissoring of a wide range of alkenes to furnish aldehydes and/or ketones in high yield using a low catalyst loading in the water. Its smart catalytic activity under mild conditions was validated for dioxygenation of alkynes to highly demanding labile synthons, 1,2-diketones, and/or acids. This general and sustainable catalysis was successfully employed on sugar-based substrates to obtain the chiral amides, aldehydes, and labile 1,2-diketones. The catalyst is recovered and reused with a moderate turnover. The proposed mechanistic pathway is supported by isolation of the intermediates and their characterization. This multifaceted sustainable catalysis is a unique tool, especially for late-stage functionalization, to furnish the targeted compounds through frequently used amidation and oxygenation processes in the academia and industry.

Switching acidity on manganese oxide catalyst with acetylacetones for selectivity-tunable amines oxidation

The design of metal oxide catalysts predominantly focuses on the composition or geometry engineering to enable optimized reactivity on the surface. Despite the numerous reports investigating the surface chemisorption of organic molecules on metal oxides, insights into how adsorption of organic modifiers can be exploited to optimize the catalytic properties of metal oxides are lacking. Herein, we describe the use of enolic acetylacetones to modify the surface Lewis acid properties of manganese oxide catalysts. The acetylacetone modification is stable under the reaction conditions and strongly influences the redox-acid cooperative catalysis of manganese oxides. This enables a rational control of the oxidation selectivity of structurally diverse arylmethyl amines to become switchable from nitriles to imines.

Lithium promoted mesoporous manganese oxide catalyzed oxidation of allyl ethers

Herein we report the first example of the catalytic aerobic partial oxidation of allyl ether to its acrylate ester derivative. Many partial oxidations often need an expensive oxidant such as peroxides or other species to drive such reactions. In addition, selective generation of esters using porous catalysts has been elusive. This reaction is catalyzed by a Li ion promoted mesoporous manganese oxide (meso-Mn₂O₃) under mild conditions with no precious metals, a reusable heterogeneous catalyst, and easy isolation. This process is very attractive for the oxidation of allyl ethers. We report on the catalytic activity, selectivity, and scope of the reaction. In the best cases presented, almost complete conversion of allyl ether with near complete chemo-selectivity towards acrylate ester derivatives is observed. Based on results from controlled experiments, we propose a possible reaction mechanism for the case in which N-hydroxyphthalimide (NHPI) is used in combination with trichloroacetonitrile (CCl₃CN).

Acrylics and acrylates have become important building blocks for the chemical industry, but their efficient synthesis remains a challenge. Here, the authors report the first example of the catalytic aerobic partial oxidation of allyl ether to its acrylate ester derivative using a Li ion promoted mesoporous manganese oxide under mild conditions.

Chelation-assisted C-N cross-coupling of phosphinamides and aryl boronic acids with copper powder at room temperature

A protocol for the chelation-assisted C-N cross-coupling of phosphinamides and aryl boronic acids with copper powder under an oxygen atmosphere is reported. This reaction proceeds efficiently to afford fully substituted unsymmetrical N-arylation phosphinamides at room temperature in excellent yields. Diverse unstable functional groups on the benzene ring of aryl boronic acids such as vinyl, formyl, acetyl, sulfonyl, acetylamino, cyano, nitro, and trifluoromethyl can be accommodated.

Niobium-substituted octahedral molecular sieve (OMS-2) materials in selective oxidation of methanol to dimethoxymethane

The prepared bifunctional Nb-OMS-2 catalysts are promising candidate in partial oxidation of methanol into dimethoxymethane at a lower temperature suggesting that there is an important temperature regime when forming active sites for DMM production.

Heterogeneous Catalytic Oxidation of Amides to Imides by Manganese Oxides

Herein, we report a one-step peroxide mediated heterogeneous catalytic oxidation of amides to imides utilizing a series of manganese oxides. Among them, Cs/Mn2O3 was found to be the most active catalyst for the selective partial oxidation of N-benzylbenzamide to diphenyl imide. We have been able to apply an optimized oxidation method to other aromatic substrates. The feasibility of using air as an oxidant, the heterogeneous nature, inexpensive catalytic materials, respectable turnover numbers, and chemoselectivity to imides make this methodology an attractive choice for functional group transformations of amides to imides.

Carboxylic acid-modified metal oxide catalyst for selectivity-tunable aerobic ammoxidation

Controlling the reaction selectivity of a heterobifunctional molecule is a fundamental challenge in many catalytic processes. Recent efforts to design chemoselective catalysts have focused on modifying the surface of metal nanoparticle materials having tunable properties. However, precise control over the surface properties of base-metal oxide catalysts remains a challenge. Here, we show that green modification of the surface with carboxylates can be used to tune the ammoxidation selectivity toward the desired products during the reaction of hydroxyaldehyde on manganese oxide catalysts. These modifications improve the selectivity for hydroxynitrile from 0 to 92% under identical reaction conditions. The product distribution of dinitrile and hydroxynitrile can be continuously tuned by adjusting the amount of carboxylate modifier. This property was attributed to the selective decrease in the hydroxyl adsorption affinity of the manganese oxides by the adsorbed carboxylate groups. The selectivity enhancement is not affected by the tail structure of the carboxylic acid.