A trispyrazolylborato iron cysteinato complex as a functional model for the cysteine dioxygenase

Spectroscopic, electrochemical, and kinetic trends in Fe(III)-thiolate disproportionation near physiologic pH

In addition to its primary oxygen-atom-transfer function, cysteamine dioxygenase (ADO) exhibits a relatively understudied anaerobic disproportionation reaction (ADO-Fe(III)-SR → ADO-Fe(II) + ½ RSSR) with its native substrates. Inspired by ADO disproportionation reactivity, we employ [Fe(tacn)Cl3] (tacn = 1,4,7-triazacyclononane) as a precursor for generating Fe(III)-thiolate model complexes in buffered aqueous media. A series of Fe(III)-thiolate model complexes are generated in situ using aqueous [Fe(tacn)Cl3] and thiol-containing ligands cysteamine, penicillamine, mercaptopropionate, cysteine, cysteine methyl ester, N-acetylcysteine, and N-acetylcysteine methyl ester. We observe trends in UV-Vis and electron paramagnetic resonance (EPR) spectra, disproportionation rate constants, and cathodic peak potentials as a function of thiol ligand. These trends will be useful in rationalizing substrate-dependent Fe(III)-thiolate disproportionation reactions in metalloenzymes.

DFT insights into the mechanism of O2 activation catalyzed by a structural and functional model of cysteine dioxygenase with tris(2-pyridyl)methane-based ligand architecture

Cysteine dioxygenation is an important step in the metabolism of toxic L-cysteine (Cys) in the human body, carried out by cysteine dioxygenase enzyme (CDO). The disruption of this process is found to elicit neurological health issues. This work reports a computational investigation of mechanistic aspects of this reaction, using a recently reported tris(2-pyridyl)methane-based biomimetic model complex of CDO. The computed results indicate that, the initial SO2 bond formation process is the slowest step in the S-dioxygenation process, possessing an activation barrier of 12.7 kcal/mol. The remaining steps were found to be downhill requiring very small activation energies. The transition states were found to undergo spin crossover between triplet and quintet states, while the singlet surface remained unstable throughout the entire reaction. In essence, the mechanistic scheme and multistate reactivity pattern together with the relatively small computed rate-limiting activation barrier as well as the exothermic formation energy demonstrate that the model complex is an efficient biomimetic CDO model. In addition, the study also substantiates the involvement of Fe(IV)oxido intermediates in the mechanism of S-dioxygenation by the chosen model complex. The insights derived from the O₂ activation process might pave way for development of more accurate CDO model catalysts that might be capable of even more efficiently mimicking the geometric, spectroscopic and functional features of the CDO enzyme.

Electronic structures and spectroscopic signatures of diiron intermediates generated by O2 activation of nonheme iron(II)-thiolate complexes

The activation of O2 at thiolate-ligated iron(II) sites is essential to the function of numerous metalloenzymes and synthetic catalysts. Iron-thiolate bonds in the active sites of nonheme iron enzymes arise from either coordination of an endogenous cysteinate residue or binding of a deprotonated thiol-containing substrate. Examples of the latter include sulfoxide synthases, such as EgtB and OvoA, that utilize O2 to catalyze tandem S-C bond formation and S-oxygenation steps in thiohistidine biosyntheses. We recently reported the preparation of two mononuclear nonheme iron-thiolate complexes (1 and 2) that serve as structural active-site models of substrate-bound EgtB and OvoA (Dalton Trans. 2020, 49, 17745-17757). These models feature monodentate thiolate ligands and tripodal N4 ligands with mixed pyridyl/imidazolyl donors. Here, we describe the reactivity of 1 and 2 with O2 at low temperatures to give metastable intermediates (3 and 4, respectively). Characterization with multiple spectroscopic techniques (UV-vis absorption, NMR, variable-field and -temperature Mössbauer, and resonance Raman) revealed that these intermediates are thiolate-ligated iron(III) dimers with a bridging oxo ligand derived from the four-electron reduction of O2. Structural models of 3 and 4 consistent with the experimental data were generated via density functional theory (DFT) calculations. The combined experimental and computational results illuminate the geometric and electronic origins of the unique spectral features of diiron(III)-μ-oxo complexes with thiolate ligands, and the spectroscopic signatures of 3 and 4 are compared to those of closely-related diiron(III)-μ-peroxo species. Collectively, these results will assist in the identification of intermediates that appear on the O2 reaction landscapes of iron-thiolate species in both biological and synthetic environments.

Formation of cobalt-oxygen intermediates by dioxygen activation at a mononuclear nonheme cobalt(ii) center

A mononuclear nonheme cobalt(ii) complex, [(TMG3tren)CoII(OTf)](OTf) (1), activates dioxygen in the presence of hydrogen atom donor substrates, such as tetrahydrofuran and cyclohexene, resulting in the generation of a cobalt(ii)-alkylperoxide intermediate (2), which then converts to the previously reported cobalt(iv)-oxo complex, [(TMG3tren)CoIV(O)]2+-(Sc(OTf)3)n (3), in >90% yield upon addition of a redox-inactive metal ion, Sc(OTf)3. Intermediates 2 and 3 represent the cobalt analogues of the proposed iron(ii)-alkylperoxide precursor that converts to an iron(iv)-oxo intermediate via O-O bond heterolysis in pterin-dependent nonheme iron oxygenases. In reactivity studies, 2 shows an amphoteric reactivity in electrophilic and nucleophilic reactions, whereas 3 is an electrophilic oxidant. To the best of our knowledge, the present study reports the first example showing the generation of cobalt-oxygen intermediates by activating dioxygen at a cobalt(ii) center and the reactivities of the cobalt-oxygen intermediates in oxidation reaction.

Superoxide Oxidation by a Thiolate-Ligated Iron Complex and Anion Inhibition

Superoxide (O₂^•-) is a toxic radical, generated via the adventitious reduction of dioxygen (O₂), which has been implicated in a number of human disease states. Nonheme iron enzymes, superoxide reductase (SOR) and superoxide dismutase (SOD), detoxify O₂^•- via reduction to afford H₂O₂ and disproportionation to afford O₂ and H₂O₂, respectively. The former contains a thiolate in the coordination sphere, which has been proposed to prevent O₂^•- oxidation to O₂. The work described herein shows that, in contrast to this, oxidized thiolate-ligated [Fe^III(S^Me2N₄(tren)(THF)]²⁺ (1^ox-THF) is capable of oxidizing O₂^•- to O₂. Coordinating anions, Cl^- and OAc^-, are shown to inhibit dioxygen evolution, implicating an inner-sphere mechanism. Previously we showed that the reduced thiolate-ligated [Fe^II(S^Me2N₄(tren))]⁺ (1) is capable of reducing O₂^•- via a proton-dependent inner-sphere mechanism involving a transient Fe(III)-OOH intermediate. A transient ferric-superoxo intermediate, [Fe^III(S^Me2N₄(tren))(O₂)]⁺ (3), is detected by electronic absorption spectroscopy at -130 °C in the reaction between 1^ox-THF and KO₂ and shown to evolve O₂ upon slight warming to -115 °C. The DFT calculated O-O (1.306 Å) and Fe-O (1.943 Å) bond lengths of 3 are typical of ferric-superoxo complexes, and the time-dependent DFT calculated electronic absorption spectrum of 3 reproduces the experimental spectrum. The electronic structure of 3 is shown to consist of two antiferromagnetically coupled (J^calc = -180 cm^-1) unpaired electrons, one in a superoxo π*(O-O) orbital and the other in an antibonding π*(Fe(d_yz)-S(p_y)) orbital.

Proton-Coupled Electron-Transfer Reactivity Controls Iron versus Sulfur Oxidation in Nonheme Iron-Thiolate Complexes

Reaction of the five-coordinate Fe^II(N₄S) complexes, [Fe^II(iPr₃TACN)(abt^X)](OTf) (abt = aminobenzenethiolate, X = H, CF₃), with a one-electron oxidant and an appropriate base leads to net H atom loss, generating new Fe^III(iminobenzenethiolate) complexes that were characterized by single-crystal X-ray diffraction (XRD), as well as UV-vis, EPR, and Mössbauer spectroscopies. The spectroscopic data indicate that the iminobenzenethiolate complexes have S = 3/2 ground states. In the absence of a base, oxidation of the Fe^II(abt) complexes leads to disulfide formation instead of oxidation at the metal center. Bracketing studies with separated proton-coupled electron-transfer (PCET) reagents show that the Fe^II(aminobenzenethiolate) and Fe^III(iminobenzenethiolate) forms are readily interconvertible by H⁺/e^- transfer and provide a measure of the bond dissociation free energy (BDFE) for the coordinated N-H bond between 64 and 69 kcal mol^-1. This work shows that coordination to the iron center causes a dramatic weakening of the N-H bond and that Fe- versus S-oxidation in a nonheme iron complex can be controlled by the protonation state of an ancillary amino donor.

Tuning the stereoelectronic factors of iron(II)-2-aminophenolate complexes for the reaction with dioxygen: oxygenolytic C-C bond cleavage vs. oxidation of complex

Oxidative C-C bond cleavage of 2-aminophenols mediated by transition metals and dioxygen is a topic of great interest. While the oxygenolytic C-C bond cleavage reaction relies on the inherent redox non-innocent property of 2-aminophenols, the metal complexes of 2-aminophenolates often undergo 1e-/2e- oxidation events (metal or ligand oxidation), instead of the direct addition of O2 for subsequent C-C bond cleavage. In this work, we report the isolation, characterization and dioxygen reactivity of a series of ternary iron(ii)-2-aminophenolate complexes [(TpPh,Me)FeII(X)], where X = 2-amino-4-tert-butylphenolate (4-tBu-HAP) (1); X = 2-amino-4,6-di-tert-butylphenolate (4,6-di-tBu-HAP) (2); X = 2-amino-4-nitrophenolate (4-NO2-HAP)(3); and X = 2-anilino-4,6-di-tert-butylphenolate (NH-Ph-4,6-di-tBu-HAP) (4) supported by a facial tridentate nitrogen donor ligand (TpPh,Me = hydrotris(3-phenyl-5-methylpyrazol-1-yl)borate). Another facial N3 ligand (TpPh2 = hydrotris(3,5-diphenyl-pyrazol-1-yl)borate) has been used to isolate an iron(ii)-2-anilino-4,6-di-tert-butylphenolate complex (5) for comparison. Both [(TpPh,Me)FeII(4-tBu-HAP)] (1) and [(TpPh,Me)FeII(4,6-di-tBu-HAP)] (2) undergo regioselective oxidative aromatic ring fission reaction of the coordinated 2-aminophenols to the corresponding 2-picolinic acids in the reaction with dioxygen. In contrast, complex [(TpPh,Me)FeII(4-NO2-HAP)] (3) displays metal based oxidation to form an iron(iii)-2-amidophenolate complex. Complexes [(TpPh,Me)FeII(NH-Ph-4,6-di-tBu-HAP)] (4) and [(TpPh2)FeII(NH-Ph-4,6-di-tBu-HAP)] (5) react with dioxygen to undergo 2e- oxidation with the formation of the corresponding iron(iii)-2-iminobenzosemiquinonato radical species implicating the importance of the -NH2 group in directing the C-C bond cleavage reactivity of 2-aminophenols. The systematic study presented in this work unravels the effect of the electronic and structural properties of the redox non-innocent 2-aminophenolate ring and the supporting ligand on the C-C bond cleavage reactivity vs. the metal/ligand oxidation of the complexes. The study further reveals that proper modulation of the stereoelectronic factors enables us to design a well synchronised proton transfer (PT) and dioxygen binding events for complexes 1 and 2 that mimic the structure and function of the nonheme enzyme 2-aminophenol-1,6-dioxygenase (APD).

Nonheme iron-thiolate complexes as structural models of sulfoxide synthase active sites

Two mononuclear iron(ii)-thiolate complexes have been prepared that represent structural models of the nonheme iron enzymes EgtB and OvoA, which catalyze the O2-dependent formation of carbon-sulfur bonds in the biosynthesis of thiohistidine compounds. The series of Fe(ii) complexes reported here feature tripodal N4 chelates (LA and LB) that contain both pyridyl and imidazolyl donors (LA = (1H-imidazol-4-yl)-N,N-bis((pyridin-2-yl)methyl)methanamine; LB = N,N-bis((1-methylimidazol-2-yl)methyl)-2-pyridylmethylamine). Further coordination with monodentate aromatic or aliphatic thiolate ligands yielded the five-coordinate, high-spin Fe(ii) complexes [FeII(LA)(SMes)]BPh4 (1) and [FeII(LB)(SCy)]BPh4 (2), where SMes = 2,4,6-trimethylthiophenolate and SCy = cyclohexanethiolate. X-ray crystal structures revealed that 1 and 2 possess trigonal bipyramidal geometries formed by the N4S ligand set. In each case, the thiolate ligand is positioned cis to an imidazole donor, replicating the arrangement of Cys- and His-based substrates in the active site of EgtB. The geometric and electronic structures of 1 and 2 were analyzed with UV-vis absorption and Mössbauer spectroscopies in tandem with density functional theory (DFT) calculations. Exposure of 1 and 2 to nitric oxide (NO) yielded six-coordinate FeNO adducts that were characterized with infrared and electron paramagnetic resonance (EPR) spectroscopies, confirming that these complexes are capable of binding diatomic molecules. Reaction of 1 and 2 with O2 causes oxidation of the thiolate ligands to disulfide products. The implications of these results for the development of functional models of EgtB and OvoA are discussed.

Enhancing Tris(pyrazolyl)borate-Based Models of Cysteine/Cysteamine Dioxygenases through Steric Effects: Increased Reactivities, Full Product Characterization and Hints to Initial Superoxide Formation

The design of biomimetic model complexes for the cysteine dioxygenase (CDO) and cysteamine dioxygenase (ADO) is reported, where the 3-His coordination of the iron ion is simulated by three pyrazole donors of a trispyrazolyl borate ligand (Tp) and protected cysteine and cysteamine represent substrate ligands. It is found that the replacement of phenyl groups-attached at the 3-positions of the pyrazole units in a previous model-by mesityl residues has massive consequences, as the latter arrange to a more spacious reaction pocket. Thus, the reaction with O2 proceeds much faster and afterwards the first structural characterization of an iron(II) η2 -O,O-sulfinate product became possible. If one of the three Tp-mesityl groups is placed in the 5-position, an even larger reaction pocket results, which leads to yet faster rates and accumulation of a reaction intermediate at low temperatures, as shown by UV/Vis and Mössbauer spectroscopy. After comparison with the results of investigations on the cobalt analogues this intermediate is tentatively assigned to an iron(III) superoxide species.

Activation of Dioxygen by a Mononuclear Nonheme Iron Complex: Sequential Peroxo, Oxo, and Hydroxo Intermediates

The activation of dioxygen by Fe^II(Me₃TACN)(S₂SiMe₂) (1) is reported. Reaction of 1 with O₂ at -135 °C in 2-MeTHF generates a thiolate-ligated (peroxo)diiron complex Fe^III₂(O₂)(Me₃TACN)₂(S₂SiMe₂)₂ (2) that was characterized by UV-vis (λ_max = 300, 390, 530, 723 nm), Mössbauer (δ = 0.53, |ΔE_Q| = 0.76 mm s^-1), resonance Raman (RR) (ν(O-O) = 849 cm^-1), and X-ray absorption (XAS) spectroscopies. Complex 2 is distinct from the outer-sphere oxidation product 1^ox (UV-vis (λ_max = 435, 520, 600 nm), Mössbauer (δ = 0.45, |ΔE_Q| = 3.6 mm s^-1), and EPR (S = 5/2, g = [6.38, 5.53, 1.99])), obtained by one-electron oxidation of 1. Cleavage of the peroxo O-O bond can be initiated either photochemically or thermally to produce a new species assigned as an Fe^IV(O) complex, Fe^IV(O)(Me₃TACN)(S₂SiMe₂) (3), which was identified by UV-vis (λ_max = 385, 460, 890 nm), Mössbauer (δ = 0.21, |ΔE_Q| = 1.57 mm s^-1), RR (ν(Fe^IV═O) = 735 cm^-1), and X-ray absorption spectroscopies, as well as reactivity patterns. Reaction of 3 at low temperature with H atom donors gives a new species, Fe^III(OH)(Me₃TACN)(S₂SiMe₂) (4). Complex 4 was independently synthesized from 1 by the stoichiometric addition of a one-electron oxidant and a hydroxide source. This work provides a rare example of dioxygen activation at a mononuclear nonheme iron(II) complex that produces both Fe^III-O-O-Fe^III and Fe^IV(O) species in the same reaction with O₂. It also demonstrates the feasibility of forming Fe/O₂ intermediates with strongly donating sulfur ligands while avoiding immediate sulfur oxidation.

A Structural and Functional Model for the Tris-Histidine Motif in Cysteine Dioxygenase

The iron(II) complexes [Fe(L)(MeCN)₃ ](SO₃ CF₃ )₂ (L are two derivatives of tris(2-pyridyl)-based ligands) have been synthesized as models for cysteine dioxygenase (CDO). The molecular structure of one of the complexes exhibits octahedral coordination geometry and the Fe-N_py bond lengths [1.953(4)-1.972(4) Å] are similar to those in the Cys-bound Fe^II -CDO; Fe-N_His : 1.893-2.199 Å. The iron(II) centers of the model complexes exhibit relatively high Fe^III/II redox potentials (E_1/2 =0.988-1.380 V vs. ferrocene/ferrocenium electrode, Fc/Fc⁺ ), within the range for O₂ activation and typical for the corresponding nonheme iron enzymes. The reaction of in situ generated [Fe(L)(MeCN)(SPh)]⁺ with excess O₂ in acetonitrile (MeCN) yields selectively the doubly oxygenated phenylsulfinic acid product. Isotopic labeling studies using ¹⁸ O₂ confirm the incorporation of both oxygen atoms of O₂ into the product. Kinetic and preliminary DFT studies reveal the involvement of an Fe^III peroxido intermediate with a rhombic S= 1 / 2 Fe^III center (687-696 nm; g≈2.46-2.48, 2.13-2.15, 1.92-1.94), similar to the spectroscopic signature of the low-spin Cys-bound Fe^III CDO (650 nm, g≈2.47, 2.29, 1.90). The proposed Fe^III peroxido intermediates have been trapped, and the O-O stretching frequencies are in the expected range (approximately 920 and 820 cm^-1 for the alkyl- and hydroperoxido species, respectively). The model complexes have a structure similar to that of the enzyme and structural aspects as well as the reactivity are discussed.

Di- and Tetrairon(III) μ-Oxido Complexes of an N3S-Donor Ligand: Catalyst Precursors for Alkene Oxidations

The new di- and tetranuclear Fe(III) μ-oxido complexes [Fe₄(μ-O)₄(PTEBIA)₄](CF₃SO₃)₄(CH₃CN)₂] (1a), [Fe₂(μ-O)Cl₂(PTEBIA)₂](CF₃SO₃)₂ (1b), and [Fe₂(μ-O)(HCOO)₂(PTEBIA)₂](ClO₄)₂ (MeOH) (2) were prepared from the sulfur-containing ligand (2-((2,4-dimethylphenyl)thio)-N,N-bis ((1-methyl-benzimidazol-2-yl)methyl)ethanamine (PTEBIA). The tetrairon complex 1a features four μ-oxido bridges, while in dinuclear 1b, the sulfur moiety of the ligand occupies one of the six coordination sites of each Fe(III) ion with a long Fe-S distance of 2.814(6) Å. In 2, two Fe(III) centers are bridged by one oxido and two formate units, the latter likely formed by methanol oxidation. Complexes 1a and 1b show broad sulfur-to-iron charge transfer bands around 400–430 nm at room temperature, consistent with mononuclear structures featuring Fe-S interactions. In contrast, acetonitrile solutions of 2 display a sulfur-to-iron charge transfer band only at low temperature (228 K) upon addition of H₂O₂/CH₃COOH, with an absorption maximum at 410 nm. Homogeneous oxidative catalytic activity was observed for 1a and 1b using H₂O₂ as oxidant, but with low product selectivity. High valent iron-oxo intermediates could not be detected by UV-vis spectroscopy or ESI mass spectrometry. Rather, evidence suggest preferential ligand oxidation, in line with the relatively low selectivity and catalytic activity observed in the reactions.

A Nonheme Thiolate-Ligated Cobalt Superoxo Complex: Synthesis and Spectroscopic Characterization, Computational Studies, and Hydrogen Atom Abstraction Reactivity

The synthesis and characterization of a Co(II) dithiolato complex Co(Me₃TACN)(S₂SiMe₂) (1) are reported. Reaction of 1 with O₂ generates a rare thiolate-ligated cobalt-superoxo species Co(O₂)(Me₃TACN)(S₂SiMe₂) (2) that was characterized spectroscopically and structurally by resonance Raman, EPR, and X-ray absorption spectroscopies as well as density functional theory. Metal-superoxo species are proposed to S-oxygenate metal-bound thiolate donors in nonheme thiol dioxygenases, but 2 does not lead to S-oxygenation of the intramolecular thiolate donors and does not react with exogenous sulfur donors. However, complex 2 is capable of oxidizing the O-H bonds of 2,2,6,6-tetramethylpiperidin-1-ol derivatives via H atom abstraction. Complementary proton-coupled electron-transfer reactivity is seen for 2 with separated proton/reductant pairs. The reactivity studies indicate that 2 can abstract H atoms from weak X-H bonds with bond dissociation free energy (BDFE) ≤ 70 kcal mol^-1. DFT calculations predict that the putative Co(OOH) product has an O-H BDFE = 67 kcal mol^-1, which matches the observed pattern of reactivity seen for 2. These data provide new information regarding the selectivity of S-oxygenation versus H atom abstraction in thiolate-ligated nonheme metalloenzymes that react with O₂.

Dioxygen activation by a dinuclear thiolate-ligated Fe(ii) complex

Dioxygen activation by FeII thiolate complexes is relatively rare in biological and chemical systems because the sulfur site is at least as vulnerable as the iron site to oxidative modification. O2 activation by FeII-SR complexes with thiolate bound trans to the O2 binding site generally affords the FeIV[double bond, length as m-dash]O intermediate and oxidized thiolate. On the other hand, O2 activation by Fe(ii)-SR complexes with thiolate bound cis to the O2 binding site generates FeIII-O-FeIII or S-oxygenated complexes. The postulated FeIV[double bond, length as m-dash]O intermediate has only been identified in isopenicillin N synthase recently. We demonstrated here that O2 activation by a dinuclear FeII thiolate-rich complex produces a mononuclear FeIII complex and water with a supply of electron donors. The thiolate is bound cis to the postulated dioxygen binding site, and no FeIII-O-FeIII or S-oxygenated complex was observed. Although we have not detected the transient intermediate by spectroscopic measurements, the FeIV[double bond, length as m-dash]O intermediate is suggested to exist by theoretical calculation, and P-oxidation and hydride-transfer experiments. In addition, an unprecedented FeIII-O2-FeIII complex supported by thiolates was observed during the reaction by using a coldspray ionization time-of-flight mass (CSI-TOF MS) instrument. This is also supported by low-temperature UV-vis measurements. The intramolecular NHO[double bond, length as m-dash]FeIV hydrogen bonding, calculated by DFT, probably fine tunes the O2-activation process for intramolecular hydrogen abstraction, avoiding the S-oxygenation at cis-thiolate.

Structures, Spectroscopic Properties, and Dioxygen Reactivity of 5- and 6-Coordinate Nonheme Iron(II) Complexes: A Combined Enzyme/Model Study of Thiol Dioxygenases

The synthesis of four new FeII(N4S(thiolate)) complexes as models of the thiol dioxygenases are described. They are composed of derivatives of the neutral, tridentate ligand triazacyclononane (R3TACN; R = Me, iPr) and 2-aminobenzenethiolate (abtx; X = H, CF3), a non-native substrate for thiol dioxygenases. The coordination number of these complexes depends on the identity of the TACN derivative, giving 6-coordinate (6-coord) complexes for FeII(Me3TACN)(abtx)(OTf) (1: X = H; 2: X = CF3) and 5-coordinate (5-coord) complexes for [FeII(iPr3TACN)(abtx)](OTf) (3: X = H; 4: X = CF3). Complexes 1-4 were examined by UV-vis, 1H/19F NMR, and Mössbauer spectroscopies, and density functional theory (DFT) calculations were employed to support the data. Mössbauer spectroscopy reveals that the 6-coord 1-2 and 5-coord 3- 4 exhibit distinct spectra, and these data are compared with that for cysteine-bound CDO, helping to clarify the coordination environment of the cys-bound FeII active site. Reaction of 1 or 2 with O2 at -95 °C leads to S-oxygenation of the abt ligand, and in the case of 2, a rare di(sulfinato)-bridged complex, [Fe2III(μ-O)((2-NH2) p-CF3C6H3SO2)2](OTf)2 ( 5), was obtained. Parallel enzymatic studies on the CDO variant C93G were carried out with the abt substrate and show that reaction with O2 leads to disulfide formation, as opposed to S-oxygenation. The combined model and enzyme studies show that the thiol dioxygenases can operate via a 6-coord FeII center, in contrast to the accepted mechanism for nonheme iron dioxygenases, and that proper substrate chelation to Fe appears to be critical for S-oxygenation.

A synthetic model of the nonheme iron-superoxo intermediate of cysteine dioxygenase

A nonheme Fe(ii) complex (1) that models substrate-bound cysteine dioxygenase (CDO) reacts with O2 at -80 °C to yield a purple intermediate (2). Analysis with spectroscopic and computational methods determined that 2 features a thiolate-ligated Fe(iii) center bound to a superoxide radical, mimicking the putative structure of a key CDO intermediate.

An iron-oxygen intermediate formed during the catalytic cycle of cysteine dioxygenase

Combined spectroscopic, kinetic and computational studies provide first evidence of a short-lived intermediate in the catalytic cycle of cysteine dioxygenase.

Cysteine dioxygenase is a key enzyme in the breakdown of cysteine, but its mechanism remains controversial. A combination of spectroscopic and computational studies provides the first evidence of a short-lived intermediate in the catalytic cycle. The intermediate decays within 20 ms and has absorption maxima at 500 and 640 nm.

Spectroscopic and computational studies of reversible O2 binding by a cobalt complex of relevance to cysteine dioxygenase

Spectroscopic and computational studies of reversible O₂ binding by a cobalt active-site mimic shed light on the catalytic mechanism of cysteine dioxygenases.

Metal-Assisted Oxo Atom Addition to an Fe(III) Thiolate

Cysteinate oxygenation is intimately tied to the function of both cysteine dioxygenases (CDOs) and nitrile hydratases (NHases), and yet the mechanisms by which sulfurs are oxidized by these enzymes are unknown, in part because intermediates have yet to be observed. Herein, we report a five-coordinate bis-thiolate ligated Fe(III) complex, [Fe^III(S₂^Me2N₃(Pr,Pr))]⁺ (2), that reacts with oxo atom donors (PhIO, IBX-ester, and H₂O₂) to afford a rare example of a singly oxygenated sulfenate, [Fe^III(η²-S^Me2O)(S^Me2)N₃(Pr,Pr)]⁺ (5), resembling both a proposed intermediate in the CDO catalytic cycle and the essential NHase Fe-S(O)^Cys114 proposed to be intimately involved in nitrile hydrolysis. Comparison of the reactivity of 2 with that of a more electron-rich, crystallographically characterized derivative, [Fe^IIIS₂^Me2N^MeN₂^amide(Pr,Pr)]^- (8), shows that oxo atom donor reactivity correlates with the metal ion's ability to bind exogenous ligands. Density functional theory calculations suggest that the mechanism of S-oxygenation does not proceed via direct attack at the thiolate sulfurs; the average spin-density on the thiolate sulfurs is approximately the same for 2 and 8, and Mulliken charges on the sulfurs of 8 are roughly twice those of 2, implying that 8 should be more susceptible to sulfur oxidation. Carboxamide-ligated 8 is shown to be unreactive towards oxo atom donors, in contrast to imine-ligated 2. Azide (N₃^-) is shown to inhibit sulfur oxidation with 2, and a green intermediate is observed, which then slowly converts to sulfenate-ligated 5. This suggests that the mechanism of sulfur oxidation involves initial coordination of the oxo atom donor to the metal ion. Whether the green intermediate is an oxo atom donor adduct, Fe-O═I-Ph, or an Fe(V)═O remains to be determined.

Synthesis, X-ray Structures, Electronic Properties, and O2/NO Reactivities of Thiol Dioxygenase Active-Site Models

Mononuclear non-heme iron complexes that serve as structural and functional mimics of the thiol dioxygenases (TDOs), cysteine dioxygenase (CDO) and cysteamine dioxygenase (ADO), have been prepared and characterized with crystallographic, spectroscopic, kinetic, and computational methods. The high-spin Fe(II) complexes feature the facially coordinating tris(4,5-diphenyl-1-methylimidazol-2-yl)phosphine (^Ph2TIP) ligand that replicates the three histidine (3His) triad of the TDO active sites. Further coordination with bidentate l-cysteine ethyl ester (CysOEt) or cysteamine (CysAm) anions yielded five-coordinate (5C) complexes that resemble the substrate-bound forms of CDO and ADO, respectively. Detailed electronic-structure descriptions of the [Fe(^Ph2TIP)(L_S,N)]BPh₄ complexes, where L_S,N = CysOEt (1) or CysAm (2), were generated through a combination of spectroscopic techniques [electronic absorption, magnetic circular dichroism (MCD)] and density functional theory (DFT). Complexes 1 and 2 decompose in the presence of O₂ to yield the corresponding sulfinic acid (RSO₂H) products, thereby emulating the reactivity of the TDO enzymes and related complexes. Rate constants and activation parameters for the dioxygenation reactions were measured and interpreted with the aid of DFT calculations for O₂-bound intermediates. Treatment of the TDO models with nitric oxide (NO)-a well-established surrogate of O₂-led to a mixture of high-spin and low-spin {FeNO}⁷ species at low temperature (-70 °C), as indicated by electron paramagnetic resonance (EPR) spectroscopy. At room temperature, these Fe/NO adducts convert to a common species with EPR and infrared (IR) features typical of cationic dinitrosyl iron complexes (DNICs). To complement these results, parallel spectroscopic, computational, and O₂/NO reactivity studies were carried out using previously reported TDO models that feature an anionic hydrotris(3-phenyl-5-methyl-pyrazolyl)borate (^Ph,MeTp^-) ligand. Though the O₂ reactivities of the ^Ph2TIP- and ^Ph,MeTp-based complexes are quite similar, the supporting ligand perturbs the energies of Fe 3d-based molecular orbitals and modulates Fe-S bond covalency, suggesting possible rationales for the presence of neutral 3His coordination in CDO and ADO.

Activation of Dioxygen by Iron and Manganese Complexes: A Heme and Nonheme Perspective

The rational design of well-defined, first-row transition metal complexes that can activate dioxygen has been a challenging goal for the synthetic inorganic chemist. The activation of O2 is important in part because of its central role in the functioning of metalloenzymes, which utilize O2 to perform a number of challenging reactions including the highly selective oxidation of various substrates. There is also great interest in utilizing O2, an abundant and environmentally benign oxidant, in synthetic catalytic oxidation systems. This Perspective brings together recent examples of biomimetic Fe and Mn complexes that can activate O2 in heme or nonheme-type ligand environments. The use of oxidants such as hypervalent iodine (e.g., ArIO), peracids (e.g., m-CPBA), peroxides (e.g., H2O2) or even superoxide is a popular choice for accessing well-characterized metal-superoxo, metal-peroxo, or metal-oxo species, but the instances of biomimetic Fe/Mn complexes that react with dioxygen to yield such observable metal-oxygen species are surprisingly few. This Perspective focuses on mononuclear Fe and Mn complexes that exhibit reactivity with O2 and lead to spectroscopically observable metal-oxygen species, and/or oxidize biologically relevant substrates. Analysis of these examples reveals that solvent, spin state, redox potential, external co-reductants, and ligand architecture can all play important roles in the O2 activation process.

Photoinitiated Reactivity of a Thiolate-Ligated, Spin-Crossover Nonheme {FeNO}(7) Complex with Dioxygen

The nonheme iron complex, [Fe(NO)(N3PyS)]BF4, is a rare example of an {FeNO}(7) species that exhibits spin-crossover behavior. The comparison of X-ray crystallographic studies at low and high temperatures and variable-temperature magnetic susceptibility measurements show that a low-spin S = 1/2 ground state is populated at 0-150 K, while both low-spin S = 1/2 and high-spin S = 3/2 states are populated at T > 150 K. These results explain the observation of two N-O vibrational modes at 1737 and 1649 cm(-1) in CD3CN for [Fe(NO)(N3PyS)]BF4 at room temperature. This {FeNO}(7) complex reacts with dioxygen upon photoirradiation with visible light in acetonitrile to generate a thiolate-ligated, nonheme iron(III)-nitro complex, [Fe(III)(NO2)(N3PyS)](+), which was characterized by EPR, FTIR, UV-vis, and CSI-MS. Isotope labeling studies, coupled with FTIR and CSI-MS, show that one O atom from O2 is incorporated in the Fe(III)-NO2 product. The O2 reactivity of [Fe(NO)(N3PyS)]BF4 in methanol is dramatically different from CH3CN, leading exclusively to sulfur-based oxidation, as opposed to NO· oxidation. A mechanism is proposed for the NO· oxidation reaction that involves formation of both Fe(III)-superoxo and Fe(III)-peroxynitrite intermediates and takes into account the experimental observations. The stability of the Fe(III)-nitrite complex is limited, and decay of [Fe(III)(NO2)(N3PyS)](+) leads to {FeNO}(7) species and sulfur oxygenated products. This work demonstrates that a single mononuclear, thiolate-ligated nonheme {FeNO}(7) complex can exhibit reactivity related to both nitric oxide dioxygenase (NOD) and nitrite reductase (NiR) activity. The presence of the thiolate donor is critical to both pathways, and mechanistic insights into these biologically relevant processes are presented.

Exploring the photochemosensitivity by novel cysteine-based mixed ligand complexes

A new series of cysteine-based metal(II) complexes with 2,2'-bipyridine or 1,10-phenanthroline as co-ligand have been prepared and characterized. Their DNA binding and cleavage properties have been studied. The analytical and spectroscopic data of complexes 1-18 reveal that the complexes adopt an octahedral geometry around the central metal ion in which the cysteine is coordinated through NS and NN atoms, respectively. Spectroscopic titration and viscosity measurements reveal that the complexes bind to DNA through an intercalative mode. Electrophoresis measurements exhibit that they cleave pBR322 DNA efficiently in the presence of 3-mercaptopropionic acid (MPA), probably via hydrolytic mechanism with the involvement of (•)OH. The in vitro anticancer activities indicate that the Cu(II) complexes are active against four selected human tumor cell lines. Furthermore, it is remarkable that all the complexes exhibit significant photocytotoxicity against human breast cancer cell lines (MCF-7) with a potency more than the widely used drugs photofrin and cisplatin indicating that they have the potential to act as effective anticancer drugs in a dose-dependent manner.

Utilizing the Trispyrazolyl Borate Ligand for the Mimicking of O2-Activating Mononuclear Nonheme Iron Enzymes

Mononuclear, O2-activating nonheme iron enzymes are a fascinating class of metalloproteines, capable of realizing the most different reactions, ranging from C-H activation, via O atom transfer to C-C bond cleavage, in the course of O2 activation. They can lead us the way to achieve similar reactions with comparable efficiency and selectivity in chemical laboratories, which would be highly desirable aiming at accessing value-added products or to achieve degradation of unwanted compounds. Hence, these enyzmes motivate attempts to construct artificial low-molecular weight analogues, mimicking structural or functional characteristics. Such models can, for instance, provide insights about which of the features inherent to an active site are essential and guarantee the enzyme function, and from this kind of information the minimal requirements for a biomimetic or bioinspired complex that may be applied in catalysis can be derived. On the other hand, they can contribute to an understanding of the enzyme functioning. In order to create such replicates, it is important to faithfully mimic the surroundings of the iron centers in their active sites. Most of them feature two histidine residues and one carboxylate donor, while a few exhibit a deceptively simple (His)3Fe active site. For the simulation of these, the trispyrazolyl borate ligand (Tp) particularly offers itself, as the facial arrangement of three pyrazole donors is reminiscent of the three histidine-derived imidazole donors. The focus of this Account will be on bioinorganic/biomimetic research from our laboratory utilizing Tp ligands to develop molecular models for (i) two representatives of the (His)3Fe-enzyme family, namely, the cysteine dioxygenase (CDO) and acetyl acetone dioxygenase (Dke1), (ii) a related but less well-explored variant of the CDO-the 2-aminoethanethiol dioxygenase-as well as (iii) the 2-His-1-carboxylate representative 1-aminocyclopropane-1-carboxylic acid oxidase (ACCO). The CDO catalyzes the dioxygenation of cysteine with O2 to give cysteine sulfinic acid, which could be mimicked at TpFe units in a realistic manner. Furthermore, the successful dioxygenation of 2-aminoethanethiol at the same complex metal fragments lends further support to the hypothesis that the active sites of CDO and the one of 2-aminoethanethiol dioxygenase, whose structure is unknown, are quite similar. Dke1 is capable of cleaving diketones and ketoesters to give the corresponding carboxylic acids and α-keto aldehydes, and Tp-based models have achieved comparable C-C bond cleavage reactions. The ACCO develops ethylene from ACC in the course of oxidation, and recently this has been achieved the first time for a TpFe model, too.

A structural and functional model for the 1-aminocyclopropane-1-carboxylic acid oxidase

The hitherto most realistic low-molecular-weight analogue for the 1-aminocyclopropane-1-carboxylic acid oxidase (ACCO) is reported. The ACCOs 2-His-1-carboxylate iron(II) active site was mimicked by a TpFe moiety, to which the natural substrate ACC could be bound. The resulting complex [Tp(Me,Ph) FeACC] (1), according to X-ray diffraction analysis performed for the nickel analogue, represents an excellent structural model, featuring ACC coordinated in a bidentate fashion-as proposed for the enzymatic substrate complex-as well as a vacant coordination site that forms the basis for the first successful replication also of the ACCO function: 1 is the first known ACC complex that reacts with O2 to produce ethylene. As a FeOOH species had been suggested as intermediate in the catalytic cycle, H2 O2 was tested as the oxidant, too, and indeed evolution of ethylene proceeded even more rapidly to give 65 % yield.

A trispyrazolylborato iron cysteinato complex efficiently mimics the cysteine dioxygenation process: mechanistic insights

The O2 activation process by a CDO biomimetic system has been herein investigated to gain mechanistic details on the unknown reaction mechanism. The outcomes of the DFT study show that the functional model efficiently mimics the enzymatic process, the reaction proceeding with a feasible activation barrier via multistate reactivity patterns.

Dioxygen activation and two consecutive oxidative decarboxylations of phenylpyruvate by nonheme iron(II) complexes: functional models of hydroxymandelate synthase (HMS) and CloR

Two mononuclear iron(ii)-phenylpyruvate complexes of monoanionic facial N3 ligands are reported to react with dioxygen to undergo two consecutive oxidative decarboxylation steps via an iron-mandelate complex mimicking the function of HMS and CloR.

Thioether-ligated iron(II) and iron(III)-hydroperoxo/alkylperoxo complexes with an H-bond donor in the second coordination sphere

The non-heme iron complexes, [Fe(II)(N3PySR)(CH3CN)](BF4)2 () and [Fe(II)(N3Py(amide)SR)](BF4)2 (), afford rare examples of metastable Fe(iii)-OOH and Fe(iii)-OOtBu complexes containing equatorial thioether ligands and a single H-bond donor in the second coordination sphere. These peroxo complexes were characterized by a range of spectroscopic methods and density functional theory studies. The influence of a thioether ligand and of one H-bond donor on the stability and spectroscopic properties of these complexes was investigated.

Dramatically accelerated selective oxygen-atom transfer by a nonheme iron(IV)-oxo complex: tuning of the first and second coordination spheres

The new ligand N3Py^amideSR and its Fe^II complex [Fe^II(N3Py^amideSR)](BF₄)₂ (1) are described. Reaction of 1 with PhIO at −40 °C gives metastable [Fe^IV(O)(N3Py^amideSR)]²⁺ (2), containing a sulfide ligand and a single amide H-bond donor in proximity to the terminal oxo group. Direct evidence for H-bonding is seen in a structural analogue, [Fe^II(Cl)(N3Py^amideSR)](BF₄)₂ (3). Complex 2 exhibits rapid O-atom transfer (OAT) toward external sulfide substrates, but no intramolecular OAT. However, direct S-oxygenation does occur in the reaction of 1 with mCPBA, yielding sulfoxide-ligated [Fe^II(N3Py^amideS(O)R)](BF₄)₂ (4). Catalytic OAT with 1 was also observed.

Preparation of non-heme {FeNO}7 models of cysteine dioxygenase: sulfur versus nitrogen ligation and photorelease of nitric oxide

We present the synthesis and spectroscopic characterization of [Fe(NO)(N3PyS)]BF4 (3), the first structural and electronic model of NO-bound cysteine dioxygenase. The nearly isostructural all-N-donor analogue [Fe(NO)(N4Py)](BF4)2 (4) was also prepared, and comparisons of 3 and 4 provide insight regarding the influence of S vs N ligation in {FeNO}(7) species. One key difference occurs upon photoirradiation, which causes the fully reversible release of NO from 3, but not from 4.

Synthesis and ligand non-innocence of thiolate-ligated (N4S) Iron(II) and nickel(II) bis(imino)pyridine complexes

The known iron(II) complex [Fe(II)(LN3S)(OTf)] (1) was used as starting material to prepare the new biomimetic (N4S(thiolate)) iron(II) complexes [Fe(II)(LN3S)(py)](OTf) (2) and [Fe(II)(LN3S)(DMAP)](OTf) (3), where LN3S is a tetradentate bis(imino)pyridine (BIP) derivative with a covalently tethered phenylthiolate donor. These complexes were characterized by X-ray crystallography, ultraviolet-visible (UV-vis) spectroscopic analysis, (1)H nuclear magnetic resonance (NMR), and Mössbauer spectroscopy, as well as electrochemistry. A nickel(II) analogue, [Ni(II)(LN3S)](BF4) (5), was also synthesized and characterized by structural and spectroscopic methods. Cyclic voltammetric studies showed 1-3 and 5 undergo a single reduction process with E(1/2) between -0.9 V to -1.2 V versus Fc(+)/Fc. Treatment of 3 with 0.5% Na/Hg amalgam gave the monoreduced complex [Fe(LN3S)(DMAP)](0) (4), which was characterized by X-ray crystallography, UV-vis spectroscopic analysis, electron paramagnetic resonance (EPR) spectroscopy (g = [2.155, 2.057, 2.038]), and Mössbauer (δ = 0.33 mm s(-1); ΔE(Q) = 2.04 mm s(-1)) spectroscopy. Computational methods (DFT) were employed to model complexes 3-5. The combined experimental and computational studies show that 1-3 are 5-coordinate, high-spin (S = 2) Fe(II) complexes, whereas 4 is best described as a 5-coordinate, intermediate-spin (S = 1) Fe(II) complex antiferromagnetically coupled to a ligand radical. This unique electronic configuration leads to an overall doublet spin (S(total) = 1/2) ground state. Complexes 2 and 3 are shown to react with O2 to give S-oxygenated products, as previously reported for 1. In contrast, the monoreduced 4 appears to react with O2 to give a mixture of sulfur oxygenates and iron oxygenates. The nickel(II) complex 5 does not react with O2, and even when the monoreduced nickel complex is produced, it appears to undergo only outer-sphere oxidation with O2.

Sulfide Oxidation by O2: Synthesis, Structure and Reactivity of Novel Sulfide-Incorporated Fe(II) Bis(imino)pyridine Complexes

The unsymmetrical iron(II) bis(imino)pyridine complexes [FeII(LN3SMe)(H2O)3](OTf)2 (1), and [FeII(LN3SMe)Cl2] (2) were synthesized and their reactivity with O2 was examined. Complexes 1 and 2 were characterized by single crystal X-ray crystallography, LDI-MS, 1H-NMR and elemental analysis. The LN3SMe ligand was designed to incorporate a single sulfide donor and relies on the bis(imino)pyridine scaffold. This scaffold was selected for its ease of synthesis and its well-precedented ability to stabilize Fe(II) ions. Complexes 1 and 2 ware prepared via a metal-assisted template reaction from the unsymmetrical pyridyl ketone precursor 2-(O=CMe)-6-(2,6-(iPr2-C6H3N=CMe)-C5H3N. Reaction of 1 with O2 was shown to afford the S-oxygenated sulfoxide complex [Fe(LN3S(O)Me)(OTf)]2+(3), whereas compound 2, under the same reaction conditions, afforded the corresponding sulfone complex [Fe(LN3S(O2)Me)Cl]2+ (4).

Sulfur oxygenation in biomimetic non-heme iron-thiolate complexes

The S-oxygenation of cysteine with dioxygen to give cysteine sulfinic acid occurs at the non-heme iron active site of cysteine dioxygenase. Similar S-oxygenation events occur in other non-heme iron enzymes, including nitrile hydratase and isopenicillin N synthase, and these enzymes have inspired the development of a class of [N(x)S(y)]-Fe model complexes. Certain members of this class have provided some intriguing examples of S-oxygenation, and this article summarizes these results, focusing on the non-heme iron(II/III)-thiolate model complexes that are known to react with O(2) or other O-atom transfer oxidants to yield sulfur oxygenates. Key aspects of the synthesis, structure, and reactivity of these systems are presented, along with any mechanistic information available on the oxygenation reactions. A number of iron(III)-thiolate complexes react with O(2) to give S-oxygenates, and the degree to which the thiolate sulfur donors are oxidized varies among the different complexes, depending upon the nature of the ligand, metal geometry, and spin state. The first examples of iron(II)-thiolate complexes that react with O(2) to give selective S-oxygenation are just emerging. Mechanistic information on these transformations is limited, with isotope labeling studies providing much of the current mechanistic data. The many questions that remain unanswered for both models and enzymes provide strong motivation for future work in this area.

Axial and equatorial ligand effects on biomimetic cysteine dioxygenase model complexes

Density functional theory (DFT) calculations are presented on biomimetic model complexes of cysteine dioxygenase and focus on the effect of axial and equatorial ligand placement. Recent studies by one of us [Y. M. Badiei, M. A. Siegler and D. P. Goldberg, J. Am. Chem. Soc. 2011, 133, 1274] gave evidence of a nonheme iron biomimetic model of cysteine dioxygenase using an i-propyl-bis(imino)pyridine, equatorial tridentate ligand. Addition of thiophenol, an anion - either chloride or triflate - and molecular oxygen, led to several possible stereoisomers of this cysteine dioxygenase biomimetic complex. Moreover, large differences in reactivity using chloride as compared to triflate as the binding anion were observed. Here we present a series of DFT calculations on the origin of these reactivity differences and show that it is caused by the preference of coordination site of anion versus thiophenol binding to the chemical system. Thus, stereochemical interactions of triflate and the bulky iso-propyl substituents of the ligand prevent binding of thiophenol in the trans position using triflate. By contrast, smaller anions, such as chloride, can bind in either cis or trans ligand positions and give isomers with similar stability. Our calculations help to explain the observance of thiophenol dioxygenation by this biomimetic system and gives details of the reactivity differences of ligated chloride versus triflate.

Addition of dioxygen to an N4S(thiolate) iron(II) cysteine dioxygenase model gives a structurally characterized sulfinato-iron(II) complex

The non-heme iron enzyme cysteine dioxygenase (CDO) catalyzes the S-oxygenation of cysteine by O(2) to give cysteine sulfinic acid. The synthesis of a new structural and functional model of the cysteine-bound CDO active site, [Fe(II)(N3PyS)(CH(3)CN)]BF(4) (1) is reported. This complex was prepared with a new facially chelating 4N/1S(thiolate) pentadentate ligand. The reaction of 1 with O(2) resulted in oxygenation of the thiolate donor to afford the doubly oxygenated sulfinate product [Fe(II)(N3PySO(2))(NCS)] (2), which was crystallographically characterized. The thiolate donor provided by the new N3PyS ligand has a dramatic influence on the redox potential and O(2) reactivity of this Fe(II) model complex.