Spherical Structures Composed of Multiwalled Carbon Nanotubes: Formation Mechanism and Catalytic Performance

Carbon nanotubes obtained from commercial resins with different treatment temperatures

Carbon nanotubes were prepared with commercial resin by a simple method to explore the effects of different calcination temperatures.

Nanostructured Antimicrobial Peptides: Crucial Steps of Overcoming the Bottleneck for Clinics

The security issue of human health is faced with dispiriting threats from multidrug-resistant bacteria infections induced by the abuse and misuse of antibiotics. Over decades, the antimicrobial peptides (AMPs) hold great promise as a viable alternative to treatment with antibiotics due to their peculiar antimicrobial mechanisms of action, broad-spectrum antimicrobial activity, lower drug residue, and ease of synthesis and modification. However, they universally express a series of disadvantages that hinder their potential application in the biomedical field (e.g., low bioavailability, poor protease resistance, and high cytotoxicity) and extremely waste the abundant resources of AMP database discovered over the decades. For all these reasons, the nanostructured antimicrobial peptides (Ns-AMPs), based on a variety of nanosystem modification, have made up for the deficiencies and pushed the development of novel AMP-based antimicrobial therapies. In this review, we provide an overview of the advantages of Ns-AMPs in improving therapeutic efficacy and biological stability, reducing side effects, and gaining the effect of organic targeting and drug controlled release. Then the different material categories of Ns-AMPs are described, including inorganic material nanosystems containing AMPs, organic material nanosystems containing AMPs, and self-assembled AMPs. Additionally, this review focuses on the Ns-AMPs for the effect of biological activities, with emphasis on antimicrobial activity, biosecurity, and biological stability. The "state-of-the-art" antimicrobial modes of Ns-AMPs, including controlled release of AMPs under a specific environment or intrinsic antimicrobial properties of Ns-AMPs, are also explicated. Finally, the perspectives and conclusions of the current research in this field are also summarized.

Near-infrared inorganic nanomaterial-based nanosystems for photothermal therapy

The development of robust materials for treating diseases through non-invasive photothermal therapy (PTT) has attracted increasing attention in recent years. Among various types of nanomaterials, inorganic nanomaterials with strong absorption in the near-infrared (NIR) window can be employed as high-efficiency photothermal agents to treat cancer and bacterial infections. In addition, inorganic nanomaterials can be easily combined with other drugs or chemical reagents to construct multifunctional nanomaterials to cascade stimulation responses, enhance therapeutic effects, and perform precise medical treatments. In this review, focusing on the latest developments of inorganic nanomaterials in photothermal therapy, we firstly introduced the light-to-heat conversion mechanism of inorganic nanomaterials. Secondly, we summarized the application of common inorganic nanomaterials, such as metallic nanoparticles, transition metal oxide nanoparticles and two dimensional (2D) nanosheets. In addition, the strategy of developing multifunctional nano-platforms with excellent biocompatibility as well as good targeted capability was also expounded. Finally, challenges and new perspectives for designing effective inorganic nanomaterial-based nanosystems for photothermal assisted therapy were also discussed.

Carbon-Based Nanocomposites as Fenton-Like Catalysts in Wastewater Treatment Applications: A Review

Advanced oxidation (e.g., fenton-like reagent oxidation and ozone oxidation) is a highly important technology that uses strong oxidizing free radicals to degrade organic pollutants and mineralize them. The fenton-like reactions have the characteristics of low cost, simple operation, thorough reaction and no secondary pollution. Fenton-like reagents refer to a strong oxidation system composed of transition metal ions (e.g., Fe3+, Mn2+ and Ag+) and oxidants (hydrogen peroxide, potassium persulfate, sodium persulfate, etc). Graphene and carbon nanotube possess a distinctive mechanical strength, flexibility, electrical and thermal conductivity and a very large specific surface area, which can work as an excellent carrier to disperse the catalyst and prevent its agglomeration. Fullerene can synergize with iron-based materials to promote the reaction of hydroxyl groups with organic pollutants and enhance the catalytic effect. Fenton-like catalysts influence the catalytic behavior by inducing electron transfer under strong interactions with the support. Due to the short lifespan of free radicals, the treatment effect is usually enhanced with the assistance of external conditions (ultraviolet and electric fields) to expand the application of fenton-like catalysts in water treatment. There are mainly light-fenton, electro-fenton and photoelectric-fenton methods. Fenton-like catalysts can be prepared by hydrothermal method, impregnation and coordination-precipitation approaches. The structures and properties of the catalysts are characterized by a variety of techniques, such as high-resolution transmission electron microscopy, high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption near-edge structure spectroscopy. In this paper, we review the mechanisms, preparation methods, characterizations and applications status of fenton-like reagents in industrial wastewater treatment, and summarize the recycling of these catalysts and describe prospects for their future research directions.

Chemoselective reduction of nitro and nitrile compounds using an Fe3O4-MWCNTs@PEI-Ag nanocomposite as a reusable catalyst

Chemoselective reductions by an Fe₃O₄-MWCNTs@PEI-Ag nanocomposite.

Nonmetallic boron nitride embedded graphitic carbon catalyst for oxidative dehydrogenation of ethylbenzene

Nonmetallic BN embedded graphitic carbon hybrid had abundant carbonyl groups as the active site and enriched BO species as the oxygen adsorption sites, exhibiting a high catalytic performance for oxidative dehydrogenation of ethylbenzene to styrene with high yield.

Enhanced Capacity and Rate Capability of Nitrogen/Oxygen Dual-Doped Hard Carbon in Capacitive Potassium-Ion Storage

The intercalation of potassium ions into graphite is demonstrated to be feasible, while the electrochemical performance of potassium-ion batteries (KIBs) remains unsatisfying. More effort is needed to improve the specific capacity while maintaining a superior rate capability. As an attempt, nitrogen/oxygen dual-doped hierarchical porous hard carbon (NOHPHC) is introduced as the anode in KIBs by carbonizing and acidizing the NH₂ -MIL-101(Al) precursor. Specifically, the NOHPHC electrode delivers high reversible capacities of 365 and 118 mA h g^-1 at 25 and 3000 mA g^-1 , respectively. The capacity retention reaches 69.5% at 1050 mA g^-1 for 1100 cycles. The reasons for the enhanced electrochemical performance, such as the high capacity, good cycling stability, and superior rate capability, are analyzed qualitatively and quantitatively. Quantitative analysis reveals that mixed mechanisms, including capacitance and diffusion, account for the K-ion storage, in which the capacitance plays a more important role. Specifically, the enhanced interlayer spacing (0.39 nm) enables the intercalation of large K ions, while the high specific surface area of ≈1030 m² g^-1 and the dual-heteroatom doping (N and O) are conducive to the reversible adsorption of K ions.

Unravelling the radical transition during the carbon-catalyzed oxidation of cyclohexane by in situ electron paramagnetic resonance in the liquid phase

The selective oxidation of hydrocarbons is of great importance in the chemical industry.

Selective and Stable Ethylbenzene Dehydrogenation to Styrene over Nanodiamonds under Oxygen-lean Conditions

For the first time, significant improvement of the catalytic performance of nanodiamonds was achieved for the dehydrogenation of ethylbenzene to styrene under oxygen-lean conditions. We demonstrated that the combination of direct dehydrogenation and oxidative dehydrogenation indeed occurred on the nanodiamond surface throughout the reaction system. It was found that the active sp(2)-sp(3) hybridized nanostructure was well maintained after the long-term test and the active ketonic carbonyl groups could be generated in situ. A high reactivity with 40% ethylbenzene conversion and 92% styrene selectivity was obtained over the nanodiamond catalyst under oxygen-lean conditions even after a 240 h test, demonstrating the potential of this procedure for application as a promising industrial process for the ethylbenzene dehydrogenation to styrene without steam protection.

Iron-Doped Carbon Nitride-Type Polymers as Homogeneous Organocatalysts for Visible Light-Driven Hydrogen Evolution

Graphitic carbon nitrides have appeared as a new type of photocatalyst for water splitting, but their broader and more practical applications are oftentimes hindered by the insolubility or difficult dispersion of the material in solvents. We herein prepared novel two-dimensional (2D) carbon nitride-type polymers doped by iron under a mild one-pot method through preorganizing formamide and citric acid precursors into supramolecular structures, which eventually polycondensed into a homogeneous organocatalyst for highly efficient visible light-driven hydrogen evolution with a rate of ∼16.2 mmol g(-1) h(-1) and a quantum efficiency of 0.8%. Laser photolysis and electrochemical impedance spectroscopic measurements suggested that iron-doping enabled strong electron coupling between the metal and the carbon nitride and formed unique electronic structures favoring electron mobilization along the 2D nanomaterial plane, which might facilitate the electron transfer process in the photocatalytic system and lead to efficient H2 evolution. In combination with electrochemical measurements, the electron transfer dynamics during water reduction were depicted, and the earth-abundant Fe-based catalyst may open a sustainable strategy for conversion of sunlight into hydrogen energy and cope with current challenging energy issues worldwide.

Fabrication of Nanocarbon Composites Using In Situ Chemical Vapor Deposition and Their Applications

Nanocarbon (carbon nanotubes (CNTs) and graphene (GN)) composites attract considerable research interest due to their fascinating applications in many fields. Here, recent developments in the field of in situ chemical vapor deposition (CVD) for the design and controlled preparation of advanced nanocarbon composites are highlighted, specifically, CNT-reinforced bulk structural composites, as well as CNT, GN, and CNT/GN functional composites, together with their practical and potential applications. In situ CVD is a very attractive approach for the fabrication of composites because of its engaging features, such as its simplicity, low-cost, versatility, and tunability. The morphologies, structures, dispersion, and interface of the resulting nanocarbon composites can be easily modulated by varying the experimental parameters (such as temperature, catalysts, carbon sources, templates or template catalysts, etc.), which enables a great potential for the in situ synthesis of high-quality nanocarbons with tailored size and dimension for constructing high-performance composites, which has not yet been achieved by conventional methods. In addition, new trends of the in situ CVD toward nanocarbon composites are discussed.

Preparation of nitrogen-doped carbon nanotubes with different morphologies from melamine-formaldehyde resin

We report a facile method for the synthesis of nitrogen-doped carbon nanotubes (NCNTs) from melamine-formaldehyde (MR) resin using FeCl3 or supported FeCl3 as catalysts. The growth of NCNTs follows a decomposition-reconstruction mechanism, in which the polymer precursor would totally gasify during pyrolysis process and then transformed into carbon nanotubes. The morphology of the NCNTs could be adjusted via applying different catalyst supports and three kinds of carbon nanotubes with outer-diameter of 20-200 nm and morphologies of either bamboo-like or hollow interiors were obtained. Nitrogen atoms in the materials were mainly in the form of pyridinic and quaternary form while the formation of iron species strongly depended on the interaction between iron precursor and organic carbon/nitrogen sources. All MR resin derived NCNTs are efficient toward oxygen reduction reaction (ORR). NCNTs prepared using FeCl3 as catalyst showed the highest ORR activity with half-wave potentials of -0.17 V, which is comparable with commercial Pt/C. This is probably because of a close contact between MR resin and iron precursor could enhance the iron-ligand coordination strength and thus steadily improve the performance of the catalyst.

Mesoporous TiO2/Carbon Beads: One-Pot Preparation and Their Application in Visible-Light-Induced Photodegradation

Mesoporous TiO₂/Carbon beads have been prepared via a facile impregnation-carbonization approach, in which a porous anion-exchange resin and K₂TiO(C₂O₄)₂ were used as hard carbon and titanium source, respectively. Characterization results reveal that the self-assembled composites have disordered mesostructure, uniform mesopores, large pore volumes, and high surface areas. The mesopore walls are composed of amorphous carbon, well-dispersed and confined anatase or rutile nanoparticles. Some anatase phase of TiO₂ was transformed to rutile phase via an increase of carbonization temperature or repeated impregnation of the resin with TiO(C₂O₄)₂ ^2- species. X-ray photoelectron spectroscopy, carbon, hydrogen, and nitrogen element analysis, and thermal gravity analysis results indicate the doping of carbon into the TiO₂ lattice and strong interaction between carbon and TiO₂ nanoparticles. A synergy effect by carbon and TiO₂ in the composites has been discussed herein on the degradation of methyl orange under visible light. The dye removal process involves adsorption of the dye from water by the mesopores in the composites, followed by photodegradation on the separated dye-loaded catalysts. Mesopores allow full access of the dye molecules to the surface of TiO₂ nanoparticles. Importantly, the bead format of such composite enables their straightforward separation from the reaction mixture in their application as a liquid-phase heterogeneous photodegradation catalyst.

Solid-solid grinding/templating route to magnetically separable nitrogen-doped mesoporous carbon for the removal of Cu(2+) ions

N-doped ordered mesoporous carbon materials (NOMC) with 2D hexagonal symmetry structure were synthesized via a facile solid-solid grinding/templating route, in which the ionic liquids (ILs) of 1-cyanoethyl-3-methylimidazolium chloride and SBA-15 were employed as the precursor and hard template, respectively. The as-synthesized NOMC features with a uniform mesoporous size (3.5nm), ropes-like morphology (0.4-1μm in length) and high surface area (803m(2)/g). The quantitative analysis revealed the nitrogen content on the surface of NOMC is 5.5at%. Magnetic iron nanoparticles were successfully embedded into the carbon matrix by introducing iron chloride to the mixture of SBA-15 and ILs during the synthesis process. The NOMC-Fe composite possessed superior adsorption capacity of Cu(2+) ions (23.6mg/g). Kinetic and isothermal analysis demonstrated the strong interactions between Cu(2+) ion and the adsorbent. Furthermore, the composite was magnetically separable from solution under an external magnetic field and thus displayed a superior reusability in the recycling test.

The catalytic pathways of hydrohalogenation over metal-free nitrogen-doped carbon nanotubes

Nitrogen-doped carbon nanotubes (N-CNTs) are found to be active as one novel heterogeneous catalyst for acetylene hydrochlorination reaction, possessing good activity (TOF=2.3×10(-3)  s(-1) ) and high selectivity (>98 %). Compared to toxic and energy-consuming conventional catalysts, such as HgCl2 , N-CNTs are more favorable in terms of sustainability, because of their thermo-stability, metal-free make up, and the wide availability of bulk CNT. Coupling X-ray photoelectron spectroscopy and density functional theory computations (DFT), the main active source and reaction pathway are shown. Good linearity between the quaternary nitrogen content and conversion is revealed. DFT study shows that the nitrogen doping enhanced the formation of the covalent bond between C2 H2 and NCNT compared with the undoped CNT, and therefore promoted the addition reaction of the C2 H2 and HCl into C2 H3 Cl.

Noncovalent functionalization of multi-walled carbon nanotubes as metal-free catalysts for the reduction of nitrobenzene

Multi-walled carbon nanotubes were functionalized noncovalently with small organic molecules containing specific ketonic carbonyl groups. The comparison of intrinsic activities for a series of catalysts indicates that carbonyl groups are active sites in the reduction of nitrobenzene.

Controlled fabrication of hexagonally close-packed Langmuir-Blodgett silica particulate monolayers from binary surfactant and solvent systems

We describe a controllable method to fabricate hexagonally close-packed Langmuir-Blodgett (LB) monolayers with stearic acid (SA) as co-surfactant and methanol as co-solvent. The optimal SA concentrations and volume ratios of chloroform to methanol are 0.8 mg/mL and 3:1 for particles of 140 nm, 0.50 mg/mL and 4:1 for particles of 300 nm, and 0.05 mg/mL and 5:1 for particles of 550 nm, respectively. Additionally, SEM detections of the monolayers transferred at different surface pressures indicate that the monolayers deposited from the binary systems are more compressible. The experimental results indicate that the interparticle repulsions and particle-water interactions can be enhanced without decreasing the particle hydrophobicity by adding SA and methanol; thus, particulate monolayers with large hexagonally close-packed domains composed of small silica particles can be successfully fabricated using LB technique. We propose that the enhanced interparticle repulsion is attributed to the Columbic repulsion resulting from the attachment of SA molecules to the CTAB modified particles around the three phase contact line.