Dynamic Interactive Membranes with Pressure-Driven Tunable Porosity and Self-Healing Ability

Advanced stimuli-responsive membranes for smart separation

Membranes have been extensively studied and applied in various fields owing to their high energy efficiency and small environmental impact. Further conferring membranes with stimuli responsiveness can allow them to dynamically tune their pore structure and/or surface properties for efficient separation performance. This review summarizes and discusses important developments and achievements in stimuli-responsive membranes. The most commonly utilized stimuli, including light, pH, temperature, ions, and electric and magnetic fields, are discussed in detail. Special attention is given to stimuli-responsive control of membrane pore structure (pore size and porosity/connectivity) and surface properties (wettability, surface topology, and surface charge), from the perspective of determining the appropriate membrane properties and microstructures. This review also focuses on strategies to prepare stimuli-responsive membranes, including blending, casting, polymerization, self-assembly, and electrospinning. Smart applications for separations are also reviewed as well as a discussion of remaining challenges and future prospects in this exciting field. This review offers critical insights for the membrane and broader materials science communities regarding the on-demand and dynamic control of membrane structures and properties. We hope that this review will inspire the design of novel stimuli-responsive membranes to promote sustainable development and make progress toward commercialization.

Nano-Fibrous Networks from Co-Assembly of Amphiphilic Peptide and Polyelectrolyte

Organize the matter on an increasingly small scale is sought in order to increase the performance of materials. In the case of porous materials, such as filtration membranes, a compromise must be found between the selectivity provided by this nanostructuring and a permeability in particular linked to the existing pore volume. In this work, we propose an innovative waterborne approach consisting in co-assembling peptide amphiphiles (PA) which will provide nanostructuring and polyelectrolytes which will provide them with sufficient mechanical properties to sustain water pressure. C₁₆-V₃A₃K₃G-NH₂ PA nanocylinders were synthesized and co-assembled with poly(sodium 4-styrenesulfonate) (PSSNa) into porous nano-fibrous network via electrostatic interactions. The ratio between C₁₆-V₃A₃K₃G-NH₂ and PSSNa was studied to optimize the material structure. Since spontaneous gelation between the two precursors does not allow the material to be shaped, various production methods have been studied, in particular via tape casting and spray-coating. Whereas self-supported membranes were mechanically weak, co-assemblies supported onto commercial ultrafiltration membranes could sustain water pressure up to 3 bars while a moderate permeability was measured confirming the existence of a percolated network. The produced membrane material falls into the ultrafiltration range with a pore radius of about 7.6 nm.

Hydrazine-Enabled One-Step Synthesis of Metal Nanoparticle-Functionalized Gradient Porous Poly(ionic liquid) Membranes

In this communication, a one-step synthetic route is reported toward free-standing metal-nanoparticle-functionalized gradient porous polyelectrolyte membranes (PPMs). The membranes are produced by soaking a glass-plate-supported blend film that consists of a hydrophobic poly(ionic liquid) (PIL), poly(acrylic acid), and a metal salt, into an aqueous hydrazine solution. Upon diffusion of water and hydrazine molecules into the blend film, a phase separation process of the hydrophobic PIL and an ionic crosslinking reaction via interpolyelectrolyte complexation occur side by side to form the PPM. Simultaneously, due to the reductive nature of hydrazine, the metal salt inside the polymer blend film is reduced in situ by hydrazine into metal nanoparticles that anchor onto the PPM. The as-obtained hybrid porous membrane is proven functional in the catalytic reduction of p-nitrophenol. This one-step method to grow metal nanoparticles and gradient porous membranes can simplify future fabrication processes of multifunctional PPMs.

Chemically Tailored Multifunctional Asymmetric Isoporous Triblock Terpolymer Membranes for Selective Transport

Membrane-based separation of organic molecules with 1-2 nm lateral dimensions is a demanding but rather underdeveloped technology. The major challenge is to fabricate membranes having distinct nanochannels with desired functionality. Here, a bottom-up strategy to produce such a membrane using a tailor-made triblock terpolymer featuring miscible end blocks with two different functional groups is demonstrated. A scalable multifunctional integral asymmetric isoporous membrane is fabricated by the solvent evaporation-induced self-assembly of the block copolymer combined with nonsolvent-induced phase separation. The membrane nanopores are readily functionalized using positively and negatively charged moieties by two straightforward gas-solid reactions. The pores of the post-functionalized membranes act as target-specific functional soft nanochannels due to swelling of the polyelectrolyte blocks in a hydrated state. The membranes show unprecedented separation selectivity of small molecules based on size and/or charge which demonstrates the potential of the proposed strategy to prepare next-generation nanofiltration membranes.

Unravelling the formation of BAB block copolymer assemblies during PISA in water

BAB triblock copolymers prepared by PISA in water self-assemble into a transient network of bridged micelles. The slowdown of the exchange of B blocks between micelles during PISA is highlighted as well as the parameters affecting the polymerization.

Harnessed Dopant Block Copolymers Assist Decorating Membrane Pores: A Dissipative Particle Dynamics Study

Self-assembly of asymmetric block copolymers (BCPs) around active pore edges has emerged as an important strategy to produce smart membranes with tunable pathways for solute transport. However, thus far, it is still challenging to manipulate pore shape and functionality for directional transformation under external stimuli. Here, a versatile strategy by mesoscale simulations to design stimuli-responsive pores with various edge decorations in hybrid membranes is reported. Dopant BCPs are used as decorators to stabilize pore edges and extend their function in reconfiguring pores in response to repeated membrane stretching/shrinking caused by external stimuli. The decoration morphologies are predictable since the assemblies of dopant BCPs around pore edges are closely related to their self-assemblies in solution. The coassembly between different BCPs in the hybrid membrane for the control of pore morphology is featured, and the parameter settings, including block incompatibility and molecular architecture for the construction of a specific pore, are determined. Results show that harnessed dopant BCPs in the hybrid membrane can enhance pore formation and induce directional pore shape and functionality transformation. Diversified pore decorations exhibit potential that can be further explored in selective solute transport and the design of stimuli-responsive smart nanodevices.

Waterproof breathable layers - A review

Waterproof breathable layers (WPBLs) can be classified into two large groups of hydrophilic nonporous and hydrophobic porous layers. These layers (e.g., fabrics, films, membranes, and meshes) can be produced by various continuous and non-continuous processes such as coating, laminating, film stretching, casting, etc. The most common methods for production, characterization, and testing of WPBLs are presented and discussed in light of recent publications. The materials with high level of waterproofness and breathability are often used in outerwear for winter sports, sailing apparel, raincoats, military/police jackets, backpacks, tents, cargo raps, footwear and etc. WPBLs can also be used for other specialized applications such as membrane distillation, oil-water filtration, and wound dressing. These applications are discussed by presenting several good examples. The main challenge in the production of these layers is to compromise between waterproofness and breathability with opposing nature. The related research gaps, challenges, and future outlook are highlighted to shed more light on the topic.

Modeling Self-Healing Mechanisms in Coatings: Approaches and Perspectives

There is a wide range of self-healing mechanisms that provide the recovery of specific functionalities in coatings. Moreover, it is well known that computational simulation is a complementary tool that can help in the optimization and cost reduction of the experimental development of materials. This work critically discusses the current status of the models that are of interest for the advance of self-healing coatings, and proposes future paths of improvement.

Negatively Charged Porous Thin Film from ABA Triblock Copolymer Assembly

The preparation of well-arranged nano-porous thin films from an ABA triblock copolymer of polystyrene-block-poly(sodium 4-styrenesulfonate)-block-polystyrene (PS-PNaSS-PS) is reported. This copolymer was self-assembled in a N,N-dimethylformamide (DMF)/water mixture and the resulting micellar solution was used to prepare thin films via the compact packing of the flower-like micelles using spin coating method. The films were characterized by several microscopy techniques such as TEM, AFM, and SEM. Permeation test was performed to highlight the interconnected porous nature of the polymeric network obtained. Under applied water pressure, the micellar morphology was altered and a partial fusion of the micelles was observed that resulted in a change in the water permeability. Such hydrophilic nanoporous thin films with negatively charged interface could find applications in membrane filtration.

Selective Transport through Membranes with Charged Nanochannels Formed by Scalable Self-Assembly of Random Copolymer Micelles

Membranes that can separate compounds based on molecular properties can revolutionize the chemical and pharmaceutical industries. This study reports membranes capable of separating organic molecules of similar size based on their electrostatic charge. These membranes feature a network of carboxylate-functionalized 1-3 nm nanochannels, manufactured by a simple, scalable coating process: a porous support is coated with a packed array of polymer micelles in alcohol, formed by the self-assembly of a water-insoluble random copolymer with fluorinated and carboxyl functional repeat units. The interstices between these micelles serve as charged nanochannels through which water and solutes can pass. The negatively charged carboxylate groups lead to high separation selectivities between organic solutes of similar size but different charge. In single-solute diffusion experiments, neutral solutes permeate up to 263 times faster than negatively charged compounds of similar size. This selectivity is further enhanced in experiments with mixtures of these solutes. No permeation of the anionic compound was observed for over 24 h. In filtration experiments, these membranes separate anionic and neutral organic compounds while exhibiting water fluxes comparable to that of commercial membranes. Furthermore, carboxylate groups can be functionalized, creating membranes with nanopores with customizable functionality to enable a broad range of selective separations.

Nano-porous structuresviaself-assembly of amphiphilic triblock copolymers: influence of solvent and molecular weight

Self-assembly of ABA triblock copolymer micelles into porous materials which are subsequently used as filtration membranes.

In Situ Healing of Compromised Membranes via Polyethylenimine-Functionalized Silica Microparticles

Microscale damages to membranes used in large-scale filtration processes for water treatment can result in severe degradation of product water quality. One promising technology to address this issue is in situ healing of compromised membranes via healing agents that are added to the feed side of a membrane system and seal the defect site because of increased hydraulic drag through damage site during filtration. We herein introduce an improved in situ membrane healing method using amine-functionalized silica microparticles that is effective under varying operating conditions, overcoming limitations faced by previous healing agents such as chitosan agglomerates. The silica microparticles are functionalized with branched polyethylenimine (PEI) molecules for efficient interparticle cross-linking with glutaraldehyde. The PEI-decorated silica microparticles (SiO₂@PEI MPs) were characterized using scanning electron microscopy, dynamic light scattering, and zeta potential analysis. This study investigates the selective deposition of the SiO₂@PEI MPs on the damage area using confocal laser scanning microscopy under variable cross-flow rate (0.5-2.0 L/min) and flushing time (10 to 30 min) conditions. The in situ healing technique recovered the particle rejection of compromised membranes to 99.1% of the original membrane's performance without any flux decline. The results of this study show that the use of SiO₂@PEI MPs is a promising and practical approach to ensure membrane process integrity.

Translocation across a self-healing block copolymer membrane

Herein, a membrane prepared from the self-assembly of poly(styrene-co-acrylonitrile)-b-poly(ethylene oxide)-b-poly(styrene-co-acrylonitrile) micelles is found to exhibit translocation of nano-objects dispersed in aqueous solution. With the water flow as a driving force, temporary pores are created in between the micelles to facilitate the passage of nano-objects. These temporary pores close afterwards through a self-healing mechanism. As main results, polystyrene and silica nanoparticles exhibited a selective translocation directly influenced by their size and applied pressure.

Self-Healing Hydrogel Pore-Filled Water Filtration Membranes

Damages to water filtration membranes during installation and operation are known to cause detrimental loss of the product water quality. Membranes that have the ability to self-heal would recover their original rejection levels autonomously, bypassing the need for costly integrity monitoring and membrane replacement practices. Herein, we fabricated hydrogel pore-filled membranes via in situ graft polymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) onto microporous poly(ether sulfone) (PES) substrates and successfully demonstrated their self-healing ability. Covalent attachment of the hydrogel to the substrate was essential for stable membrane performance. The membranes autonomously restore their particle rejection up to 99% from rejection levels as low as 30% after being physically damaged. We attribute the observed self-healing property to swelling of the pore-filling hydrogel into the damage site, strong hydrogen bonding, and molecular interdiffusion. The results of this study show that hydrogel pore-filled membranes are a promising new class of materials for fabricating self-healing membranes.

Self-assembly of PS-PNaSS-PS triblock copolymers from solution to the solid state

Morphological development of block copolymer assemblies from solution to the solid state is explored to yield nanostructured materials.

Self-healing polymeric materials for membrane separation: an example of a polybenzimidazole-based membrane for pervaporation dehydration on isopropanol aqueous solution

The demonstration of a self-healing material based separation membrane for pervaporation dehydration on liquid–liquid mixtures.

Hierarchically porous bio-inspired films prepared by combining “breath figure” templating and selectively degradable block copolymer directed self-assembly

Hierarchically porous bio-inspired honeycomb films prepared by combining the breath figure bottom-up process and selectively degradable block copolymer directed self-assembly.

Visible-Light-Induced Self-Healing Diselenide-Containing Polyurethane Elastomer

Visible light is an easily achievable and mild trigger for self-healing materials. By incorporating dynamic diselenide bonds into polyurethane, visible-light-induced self-healing materials can be fabricated. Besides mild visible light, the healing process can also be realized using directional laser irradiation, which makes the system a remotely controllable self-healing system.

EPR Studies of the Binding Properties, Guest Dynamics, and Inner-Space Dimensions of a Water-Soluble Resorcinarene Capsule

Nitroxide free radicals have been used to study the inner space of one of Rebek's water-soluble capsules. EPR and (1) H NMR spectroscopy, ESI-MS, and DFT calculations showed a preference for the formation of 1:2 complexes. EPR titrations allowed us to determine binding constants (Ka ) in the order of 10(7)  M(-2) . EPR spectral-shape analysis provided information on the guest rotational dynamics within the capsule. The interplay between optimum hydrogen bonding upon capsule formation and steric strain for guest accommodation highlights some degree of flexibility for guest inclusion, particularly at the center of the capsule where the hydrogen bond seam can be barely distorted or slightly disturbed.

Gelation-driven Dynamic Systemic Resolution: in situ Generation and Self-Selection of an Organogelator

An organogelator was produced and identified from a dynamic imine system, resolved and amplified by selective gelation. The formation of the organogel was monitored in situ by (1)H NMR, showing the existence of multiple reversible reactions operating simultaneously, and the redistribution of the involved species during gelation. The formed organogelator proved effective with a range of organic solvents, including DMSO, toluene, and longer, linear alcohols.

Stimuli responsive nanostructured porous network from triblock copolymer self-assemblies

Well controlled ABA triblock copolymer with pendent boronic acid groups is prepared using RAFT chemistry. The resulting flower like micelles in mixture of H₂O/NMP forms stimuli responsive porous network.

Segmental relaxation behavior of polystyrene chains in the cores of collapsed dry micelles tethered on the micelle film surface by a poly(acrylic acid) corona

We present an experimental investigation of the segmental relaxation behavior of polystyrene (PS) chains that are confined in a micellar core tethered by a poly(acrylic acid) (PAA) block corona on the dry film surface, along with various core density and molecular weight of PS block from below to well above the entanglement molecular weight. The results show that the onset temperature of PS chain rearrangement (T(onset)), which was much lower than the T(bulk)(g) of the corresponding PS block and higher than T(film)(g) of ultrathin PS films with corresponding thickness and molecular weights, generally increases with increasing density of the micelle core. It was found that the difference in ΔT(onset) with increasing relative density ρ/ρmin obtained from PS154-b-PAA49 and PS278-b-PAA47 micelles was large, while these from PS278-b-PAA47 and PS404-b-PAA63 was negligible, suggesting that entanglement has considerable influence on the density dependence of the T(onset) of PS chains under confinement in the micelle core on the film surface.

Multivalent hydrogen bonding block copolymers self-assemble into strong and tough self-healing materials

ABA triblock copolymers with glassy PMMA middle blocks and dynamic hydrogen bonding terminal blocks self-assemble into nanocomposites having an excellent combination of mechanical strength and self-healing capability.

Supramolecular self-assemblies as functional nanomaterials

In this review, we survey the diversity of structures and functions which are encountered in advanced self-assembled nanomaterials. We highlight their flourishing implementations in three active domains of applications: biomedical sciences, information technologies, and environmental sciences. Our main objective is to provide the reader with a concise and straightforward entry to this broad field by selecting the most recent and important research articles, supported by some more comprehensive reviews to introduce each topic. Overall, this compilation illustrates how, based on the rules of supramolecular chemistry, the bottom-up approach to design functional objects at the nanoscale is currently producing highly sophisticated materials oriented towards a growing number of applications with high societal impact.

Reversible 2D/3D coatings from zipper-assembly of block copolymer micelles

A zipper-assembly of micelles into 2D/3D coatings is reported. Block copolymer micelles that incorporate a poly(n-octadecyl methacrylate) block are zipped and unzipped on demand onto a PMMA surface. The mechanism implies an interdigitation of molecular brushes enabling 15 nm micelles to be assembled into monolayers or multilayers.

Separation, immobilization, and biocatalytic utilization of proteins by a supramolecular membrane

Membrane separation of biomolecules and their application in biocatalysis is becoming increasingly important for biotechnology, demanding the development of new biocompatible materials with novel properties. In the present study, an entirely noncovalent water-based material is used as a membrane for size-selective separation, immobilization, and biocatalytic utilization of proteins. The membrane shows stable performance under physiological conditions, allowing filtration of protein mixtures with a 150 kDa molecular weight cutoff (∼8 nm hydrodynamic diameter cutoff). Due to the biocompatibility of the membrane, filtered proteins stay functionally active and retained proteins can be partially recovered. Upon filtration, large enzymes become immobilized within the membrane. They exhibit stable activity when subjected to a constant flux of substrates for prolonged periods of time, which can be used to carry out heterogeneous biocatalysis. The noncovalent membrane material can be easily disassembled, purified, reassembled, and reused, showing reproducible performance after recycling. The robustness, recyclability, versatility, and biocompatibility of the supramolecular membrane may open new avenues for manipulating biological systems.