An Ionothermal Synthetic Approach to Porous Polyoxometalate-Based Metal-Organic Frameworks

Consecutive Single-Crystal-to-Single-Crystal Isomerization of Novel Octamolybdate Anions within a Microporous Hybrid Framework with Robust Water Sorption Properties

The 3D hybrid framework [{Cu(cyclam)}3 (κ-Mo8 O27 )] ⋅ 14H2 O (1) (cyclam=1,4,8,11-tetraazacyclotetradecane) undergoes sequential single-crystal-to-single-crystal transformations upon heating to afford two different anhydrous phases (2 a and 3 a). These transitions modify the framework dimensionality and enable the isomerization of κ-octamolybdate (κ-Mo8 ) anions into λ (2 a) and μ (3 a) forms through metal migration. Hydration of 3 a involves condensation of one water molecule to the cluster to afford the γ-Mo8 isomer in 4, which dehydrates back into 3 a through the 6 a intermediate. In contrast, 2 a reversibly hydrates to form 5, exhibiting the same Mo8 cluster as that of 1. It is remarkable that three of the Mo8 clusters (κ, λ and μ) are new and that up to three different microporous phases can be isolated from 1 (2 a, 3 a, and 6 a). Water vapor sorption analyses show high recyclability and the highest uptake values for POM-based systems. The isotherms display an abrupt step at low humidity level desirable for humidity control devices or water harvesting in drylands.

Cation effect on the electrochemical reduction of polyoxometalates in room temperature ionic liquids

Polyoxometalates (POMs) are compounds that undergo multiple successive one-electron redox transitions, making them convenient model reactants to study ion solvation effects. Room temperature ionic liquids (RTILs) are solvents made entirely of ions, and are expected to have interactions with the highly negatively charged POM reduction products. In this work, 12 RTILs with a range of different anions ([FSI]−=bis(fluorosulfonyl)imide, [TFSI]−=bis(trifluoromethylsulfonyl)imide, [BETI]−=bis(pentafluoroethylsulfonyl)imide, [BF4]−, [PF6]−) and cations (imidazolium, pyrrolidinium, sulfonium, ammonium, phosphonium) were employed as solvents to study the kinetics and thermodynamics of [S2W18O62]4− reduction, to shed light on solvation effects and ion-pairing effects caused by different RTIL structures. Up to six reversible reduction processes (producing highly negatively charged [S2W18O62]10−) were observed. For the RTILs that showed multiple processes, a clear trend in both the thermodynamics (inferred from the reduction peak potentials) and kinetics (inferred from the peak-to-peak separation) was observed, in the order: imidazolium < sulfonium ≈ ammonium < pyrrolidinium < phosphonium, supporting strong interactions of the negatively charged POM reduction products with the cation. Two related POMs, [P2W18O62]6− and [PW12O40]3−, were also studied in the optimum RTIL found for [S2W18O62]4− ([C2mim][FSI]=1-ethyl-3-methylimidazolium bis(fluorosulfonyl)imide), revealing fast kinetics and asymmetric peaks for [PW12O40]3−. This work demonstrates the importance of understanding the solvation effects of RTIL ions for highly charged electrogenerated products, allowing tuning of the RTIL structure to achieve the optimum kinetics and thermodynamics for an electrochemical process.

Solitary Medium of a Multifunctional Ionic Liquid for Crystallizing Hierarchically Porous Metal-Organic Frameworks

Hierarchically porous metal-organic frameworks (HP-MOFs), dominating both the micro- and mesoporous regimes, show high potentials in various applications especially those involving bulky biomolecules. The templating method has been proven to be effective in the fabrication of HP-MOFs; however, complicated synthetic systems containing solvents, templates, and additives are frequently employed. Here we report the first example of designing a poly(ethylene glycol)-based alkylammonium and bromide multifunctional ionic liquid (IL) as a solitary medium to construct HP-MOFs, avoiding the involvement of any additional media. Besides the ready solubilization of MOF precursors in the multifunctional IL due to a poly(ethylene glycol) chain as the solubilizer, the ionic moiety facilitates electrostatic interaction to create a templating effect. Hence, UiO-66 with hierarchical porosity has been successfully fabricated, and such a methodology can also be applied to the construction of other HP-MOFs. The resultant HP-UiO-66 is efficient in the encapsulation of bulky biomolecule cytochrome c, and the adsorption capacity is obviously superior to that of the microporous counterpart.

Four Keggin-type polyoxometalate-based complexes derived from bis(pyrazine)–bis(amide) ligands for electrochemical sensing of multiple analytes and adsorbing dye molecules

Four new Keggin-based complexes derived from bis(pyrazine)–bis(amide) ligands are used to detect multiple analytes (BrO3− NO2−, Cr(vi) and Fe(iii) ions) and adsorb organic dye molecules from aqueous solution.

Arsenic(III)-Capped 12-Tungsto-2-Arsenates(III) [M2(AsIIIW6O25)2(AsIIIOH)x]n- (M = CrIII, FeIII, ScIII, InIII, TiIV, MnII) and Their Magnetic Properties

Six arsenic(III)-capped 12-tungsto-2-arsenates(III) of the type [M₂(As^IIIW₆O₂₅)₂(As^IIIOH)_x]^n- (M = Cr^III, 1; Fe^III, 2; Sc^III, 3; In^III, 4; Ti^IV, 5; Mn^II, 6) have been synthesized in aqueous medium by direct reaction of the elements using a one-pot strategy and structurally characterized by FT-IR spectroscopy, single-crystal XRD, and elemental analysis. Polyanions 1-6 are comprised of two octahedrally coordinated guest metal ions M sandwiched between two {AsW₆} units, resulting in a structure with C_2h point-group symmetry. Polyanions 1-5 contain tri- and tetravalent metal ion guests M (M = Cr^III, Fe^III, Sc^III, In^III, and Ti^IV, respectively), and they have one {As^IIIOH} group grafted on each {AsW₆} unit, whereas the divalent Mn^II-containing derivative 6 has two such {As^IIIOH} groups grafted on each {AsW₆} unit. Magnetic studies on polyanions 3-5 over the temperature range 1.8-295 K and magnetic fields of 0-7 T confirmed that they are diamagnetic. On the other hand, polyanions 1, 2, and 6 are strongly magnetic and follow the Curie-Weiss law above 30 K. The susceptibility plots of 1 and 6 exhibit broad peaks suggesting short-range antiferromagnetic ordering, while the very weak antiferromagnetic ordering of 2 is overshadowed by traces of a paramagnetic impurity. The magnetization data of 1, 2, and 6 at 1.8 K over 0-7 T were analyzed by using the Heisenberg exchange procedure. Small (negative) values of the obtained J values help in understanding the absence of long-range antiferromagnetic ordering.

Polyoxometalate-based metal–organic frameworks for heterogeneous catalysis

POM-based MOFs simultaneously possessing the virtues of POMs and MOFs exhibit excellent heterogeneous catalytic properties.

COF-inspired fabrication of two-dimensional polyoxometalate based open frameworks for biomimetic catalysis

The development of highly efficient and robust biomimetic catalysts is an essential and feasible strategy to overcome the intrinsic drawbacks of natural enzymes. Inspired by the synthetic strategy of covalent organic frameworks, we adopted a covalent-bond-driven strategy to prepare polyoxometalate (POM) based open frameworks (NKPOM-OFs = Nankai University POM-OFs) with abundant Mo[double bond, length as m-dash]O groups that can mimic the active center of sulfite oxidase. Four 2-dimensional (2D) NKPOM-OFs were designed and synthesized via the condensation reaction of linear amino-containing POMs with planar tetra-aldehyde monomers. Benefitting from the high crystallinity, the structures of 2D POM-OFs can be successfully determined from structural simulations. The results unveiled that NKPOM-OFs possessed 2D staggered stacking layered structures with the sql topology. All these NKPOM-OFs exhibited high crystallinity and stability and demonstrated outstanding performance to serve as biomimetic catalysts of sulfite oxidase with good recyclability. Notably, exfoliation of NKPOM-OFs under ultrasonic treatment can significantly boost the catalytic activity with almost two times faster reaction rates. This study not only enriches the facile and versatile synthesis strategy for POM-OFs but also provides new biomimetic platforms for biocatalysis.

Self-Assembly Hydrothermal Synthesis of Silverton-Type Polyoxometalate-Based Photocatalysts for Enhanced Degradation

The synthesis of some complex polyoxometalates (POMs) is critical to develop potential photocatalysts with high catalytic activity and selectivity. Here, we address this challenge by a hydrothermal self-assembly route to obtain a novel POM-based Co₄W₆O₂₁(OH)₂·4H₂O with a hierarchical microsphere structure. The Co₄W₆O₂₁(OH)₂·4H₂O crystallizes in the cubic space group Im3̅ with cell parameters: a = b = c = 12.878 Å, α = β = γ = 90°, and Z = 4. The structure is further characterized by X-ray diffraction, X-ray photoelectron spectroscopy, UV-vis spectroscopy, thermogravimetric analysis, and Fourier transform infrared spectra. After depositing Ag₂O nanoparticles on the 3D Co₄W₆O₂₁(OH)₂·4H₂O microsphere by photochemical synthesis, the Co₄W₆O₂₁(OH)₂·4H₂O/Ag₂O heterojunction presents enhanced photocatalytic activity for RhB compared with P25 and pristine Ag₂O. Moreover, we confirm the key role of holes for the Co₄W₆O₂₁(OH)₂·4H₂O/Ag₂O and put forward a possible mechanism for the photocatalytic degradation reaction.

An unprecedented cobalt(ii)-containing Wells–Dawson-type tungstovanadate-based metal–organic framework as an efficient catalyst for ring-opening polymerization of ε-caprolactone

An unprecedented organic–inorganic hybrid material based on Wells–Dawson-type tungstovanadate building blocks and cobalt(ii)–organic framework with a bis(triazole) ligand was prepared and employed to catalyze solvent-free ROP of caprolactone.

Synthesis of Mesoporous MWCNT/HKUST-1 Composite for Wastewater Treatment

Metal–organic frameworks (MOFs) (Hong Kong University of Science and Technology (HKUST)-1) have been widely studied using the hydrothermal method. Recently, efforts have also been geared toward the incorporation of multiwalled carbon nanotubes (MWCNTs) into the HKUST-1 MOF to advance its applications for gas storage as well as pollutant removal in wastewater. However, a significant reduction in the MWCNT/HKUST-1 composite surface area has limited its applications. We therefore synthesized HKUST-1 and HKUST-1 impregnated with acid-treated multiwalled carbon nanotubes (FMWCNTs). A large surface area of 1131.2 m2g−1 was obtained after acid treatment of the as-received MWCNTs. HKUST-1 was found to have an average particle diameter of 6.5 to 8 µm with a BET surface area of 1176.66 m2g−1. The FMWCNT/HKUST-1 composites had a BET surface area of 1108.85 m2/g. The addition of FMWCNTs was found to increase the parent MOF pore volume from 0.76 to 1.93 cm3g−1. A BJH desorption cumulative pore size of 6.97 nm was obtained in a composite sample. The maximum adsorption capacity of the composites was found to be greater than 100 mg/g at 298 K. The results obtained indicate that FMWCNT/HKUST-1 nanocomposites are a potential adsorbent for methylene blue (MB) removal in dye synthetic water.

The Selective Oxidation of Sulfides to Sulfoxides or Sulfones with Hydrogen Peroxide Catalyzed by a Dendritic Phosphomolybdate Hybrid

The oxidation of sulfides to their corresponding sulfoxides or sulfones has been achieved using a low-cost poly(amidoamine) with a first-generation coupled phosphomolybdate hybrid as the catalyst and aqueous hydrogen peroxide as the oxidant. The reusability of the catalyst was revealed in extensive experiments. The practice of this method in the preparation of a smart drug Modafinil has proved its good applicability.

Polyoxometalates in dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) are the third generation of photovoltaic cells developed by Grätzel and O'Regan. They have the characteristics of low cost, simple manufacturing process, tunable optical properties, and higher photoelectric conversion efficiency (PCE). With an ever increasing energy crisis, there is an urgent need to develop highly efficient, environmentally benign, and energy-saving cell materials. Polyoxometalates (POMs), a kind of molecular inorganic quasi-semiconductor, are promising candidates for use in different parts of DSSCs due to their excellent photosensitivity, redox, and catalytic properties, as well as their relative stability. Following a brief introduction to the development of DSSCs and the potential virtues of POMs in DSSCs, we attempt to make some generalizations about the energy level regulation of POMs that is the underlying theoretical basis for their application in DSSCs, and then we summarize the research progress of POMs in DSSCs in recent years. This is organized in terms of the properties of POMs, namely, electron acceptor, photosensitivity, redox and catalysis, based on the accumulation of our research into POMs over many years. Meanwhile, in view of the fact that the properties of POMs depend primarily on their electronic structural diversity, we keep this point in mind throughout the article with a view to revealing their structure-property relationships. Finally we provide a short summary and remarks on the future outlook. This review may be of interest to synthetic chemists devoted to designing POMs with specific structures, and researchers engaged in the extension of POMs to photoelectric materials.

Four new dual-functional electro-catalysts formed from small molybdenum clusters and Cu-pyridyl complexes

Four new isopolymolybdates-based organic–inorganic hybrids decorated with Cu-pyridyl complexes were prepared by using one-pot methods. Compounds 1–4 display discrepant dual-functional electro-catalytic activities toward reduction of nitrite and oxidation of ascorbic acid.

Polyoxometalate-based metal–organic framework NENU-5 hybrid materials for photoluminescence tuning by introducing lanthanide ions and their functionalized soft ionogel/thin film

POM-based MOFs hybrids and derived soft ionogels together with transparent thin films are prepared, all of which display multi-color and even white luminescence.

Polyoxometalate-Based Metal-Organic Frameworks for Selective Oxidation of Aryl Alkenes to Aldehydes

Polyoxometalates (POMs) show considerable catalytic performance toward the selective oxidation of alkenes to aldehydes, which is commercially valuable for the production of pharmaceuticals, dyes, perfumes, and fine chemicals. However, the low specific surface area of POMs as heterogeneous catalysts and poor recyclability as homogeneous catalysts have hindered their wide application. Dispersing POMs into metal-organic frameworks (MOFs) for the construction of POM-based MOFs (POMOFs) suggests a promising strategy to realize the homogeneity of heterogeneous catalysis. Herein, we report two new POMOFs with chemical formulas of [Co(BBTZ)₂][H₃BW₁₂O₄₀]·10H₂O (1) and [Co₃(H₂O)₆(BBTZ)₄][BW₁₂O₄₀]·NO₃·4H₂O (2) (BBTZ = 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene) for the selective oxidation of alkenes to aldehydes. Compound 1 possesses a non-interpenetrated three-dimensional (3D) cds-type open framework with a 3D channel system. Compound 2 displays a 3D polyrotaxane framework with one-dimensional channels along the [100] direction. In the selective oxidation of styrene into benzaldehyde, compound 1 can achieve a 100% conversion in 4 h with 96% selectivity toward benzaldehyde, which is superior to that of compound 2. A series of control experiments reveal that the co-role of [BW₁₂O₄₀]^5- and Co²⁺ active center as well as a more open framework feature co-promote the catalytic property of the POMOFs in this case. This work may suggest a new option for the development of POMOF catalysts in the selective oxidation of alkenes.

Synthesis and properties of a POM-based trinuclear copper(ii) triazole framework

A novel POM-based trinuclear copper(ii) triazole framework, namely, [H₂{Cu₆(trz)₆(μ₃-OH)₂}Mo₅O₁₈]·3H₂O (1) was isolated using a hydrothermal method, which displays a 3D network constructed from trinuclear copper(ii) units and triazole ligands with [Mo₅O₁₈]⁶⁻ anions as templates. 1 has been identified by single crystal X-ray diffraction, elemental analysis, thermogravimetric analysis, powder X-ray diffraction and FT-IR. Magnetic studies indicate that antiferromagnetic interactions exist in 1. In addition, 1 exhibits good Lewis acid catalytic activity for the synthesis of cyclohexanone ethylene ketal with 95% conversion. The HOMO–LUMO gap (E_g) of 1 is 2.34 eV calculated using the Kubelka–Munk equation (Fhν)^0.5, indicating that its forbidden bandwidth belongs to the semiconductor category. Visible-light photodegradation of RhB catalyzed by 1 was investigated, which shows high activity with an above 98% degradation rate.

A novel POMs-based trinuclear copper(ii) triazole framework, namely, {[H₂Cu₆(trz)₆(μ₃-OH)₂]} [Mo₅O₁₈]·3H₂O (1) was isolated by hydrothermal method, which displays remarkable Lewis acid catalytic activity and photocatalytic activity.

Novel polyoxometalate-based cobalt complexes based on rigid pyridyl-triazole-tetrazole and pyridyl-bis(triazole) ligands

Three novel polyoxometalate (POM)-based cobalt complexes have been synthesized and structurally characterized. The adsorption activities for organic dyes and electrochemical properties have been studied in detail.

Two novel bi-functional hybrid materials constructed from POMs and a Schiff base with excellent third-order NLO and catalytic properties

The first polyoxometalates modified by a porphyrin-resembling planar Schiff base have been successfully designed and synthesized under hydrothermal conditions. The third-order NLO responses indicated that they are excellent third-order NLO materials. Their catalytic performances are also investigated.

Structure-directing effects of ionic liquids in the ionothermal synthesis of metal-organic frameworks

Traditional synthesis of metal-organic frameworks (MOFs) involves the reaction of a metal-containing precursor with an organic linker in an organic solvent at an elevated temperature, in what is termed a 'solvothermal' reaction. More recently, many examples have been reported of MOF synthesis in ionic liquids (ILs), rather than an organic solvent, in 'ionothermal' reactions. The high concentration of both cations and anions in an ionic liquid allows for the formation of new MOF structures in which the IL cation or anion or both are incorporated into the MOF. Most commonly, the IL cation is included in the open cavities of the MOF, countering the anionic charge of the MOF framework itself and acting as a template around which the MOF structure forms. Ionic liquids can also serve other structure-directing roles, for example, when an IL containing a single enantiomer of a chiral anion leads to a homochiral MOF, even though the IL anion is not itself incorporated into the MOF. A comprehensive review of ionothermal syntheses of MOFs, and the structure-directing effects of the ILs, is given.

Design and synthesis of coordination polymers with chelated units and their application in nanomaterials science

The advances and problems associated with the preparation, properties and structure of coordination polymers with chelated units are presented and assessed.