Laponite Blue: Dissolving the Insoluble

Boosting the Luminescence of a Europium(III)-β-Diketonate Complex-Nanoclay Aqueous Solution by Acetylcholine

It is a challenging task to prepare lanthanide complex-based luminescent materials with high quantum efficiency in aqueous solution, since the excited state of Ln3+ can be significantly quenched by water through the excitation of the O-H vibrations. Herein, we present a simple and environmentally friendly strategy to prepare strongly red-light-emitting lanthanide complex-based luminescent materials by loading 2-thenoyltrifluoroacetate (TTA) on the Eu3+-exchanged nanoclay (Eu3+(TTAn)-NC, NC = nanoclay) and coadsorption of choline chloride (ChCl) or acetylcholine chloride (AChCl) in water. The coadsorbed molecules remarkably boosted the luminescence of Eu3+(TTAn)-NC, which is tentatively ascribed to the removal of waters coordinated in the Eu3+ coordination sphere via the complete coordination of TTA mediated by ChCl or AChCl. Highly luminescent films were facilely prepared by mixing a Eu3+(TTAn)-NC aqueous solution with PVA-ChCl (PVA-AChCl) deep eutectic solvents. This work provides a simple and environmentally friendly way for preparing highly luminescent emitting luminescent materials in aqueous solution.

Role of Exchange Cations and Layer Charge on the Dynamics of Confined Water

Describing the dynamic behavior of water confined in clay minerals is a fascinating challenge and crucial in many research areas, ranging from materials science and geotechnical engineering to environmental sustainability. Water is the most abundant resource on Earth, and the high reactivity of naturally occurring hydrous clay minerals used since prehistoric times for a variety of applications means that water-clay interaction is a ubiquitous phenomenon in nature. We have attempted to experimentally distinguish the rotational dynamics and translational diffusion of two distinct populations of interlayer water, confined and ultraconfined, in the sodium (Na) forms of two smectite clay minerals, montmorillonite (Mt) and hectorite (Ht). Samples hydrated at a pseudo one-layer hydration (1LH) state under ambient conditions were studied with quasi-elastic neutron scattering (QENS) between 150 and 300 K. Using a simplified revised jump-diffusion and rotation-diffusion model (srJRM), we observed that while interlayer water near the ditrigonal cavity in Ht forms strong H-bonds to both adjacent surface O and structural OH, H-bonding of other more prevalent interlayer water with the surface O is weaker compared to Mt, inducing a higher temperature for dynamical changes of confined water. Given the lower layer charge and faster dynamics observed for Ht compared to Mt, we consider this strong evidence confirming the influence of the interlayer cation and surfaces on confined water dynamics.

Controlled fabrication of Ag@clay nanomaterials for ultrasensitive and rapid surface-enhanced Raman spectroscopic detection

The nanostructure of Ag nanoparticles (NPs) plays a critical role in their surface-enhanced Raman scattering (SERS) activity. Despite many efforts to tune the nanostructure of Ag NPs, it remains a great challenge as Ag NPs tend to agglomerate and their nanostructure is difficult to control. Herein, newly-discovered clay-surfactant-Ag⁺ materials and interfacial processes were developed and used to prepare uniform spherical Ag@synthetic hectorite (Ag@Hct) nanomaterials for ultrasensitive SERS assay. Sodium dodecyl sulfate (SDS), an anionic surfactant, acted as a bridge to conjugate the positively charged edge of Hct NPs and Ag⁺via electrostatic interaction to form the bridging nanostructure of Hct-SDS-Ag⁺, which promoted the uniform dispersion of Hct NPs. Following this, Ag⁺ was reduced to Ag⁰ by the reductant, and Ag⁰ grew on the surface of disc-like Hct NPs to form spherical Ag@Hct nanomaterials with an average particle size of ∼24 nm. The prepared Ag@Hct nanomaterials showed an ultrasensitive SERS response to methylene blue (MB) with a detection limit of 10^-12 M. The detection limit of MB in sewage was 10^-11 M. The prepared Ag@Hct nanomaterials also exhibited great SERS enhancement for malachite green and crystal violet. This work provides a novel and simple approach to prepare Ag@Hct nanomaterials with uniform spheres and adjustable particle size, allowing more sensitive and reproducible detection of MB.

Laponite-Based Nanomaterials for Drug Delivery

Laponite is a clay-based material composed of synthetic disk-shaped crystalline nanoparticles with highly ionic, large surface area. These characteristics enable the intercalation and dissolution of biomolecules in Laponite-based drug delivery systems. Furthermore, Laponite's innate physicochemical properties and architecture enable the development of tunable pH-responsive drug delivery systems. Laponite's coagulation capacity and cation exchangeability determine its exchange capabilities, drug encapsulation efficiency, and release profile. These parameters are exploited to design highly controlled and efficacious drug delivery platforms for sustained drug release. In this review, they provide an overview of how to design efficient delivery of therapeutics by leveraging the properties and specific interactions of various Laponite-polymer composites and drug moieties.

Superelastic Clay/Silicone Composite Sponges and Their Applications for Oil/Water Separation and Solar Interfacial Evaporation

3D porous materials are of great interest in many areas of study, but it is still difficult to prepare those with high elasticity and low thermal conductivity via facile methods. Here, superelastic laponite/silicone (LS) composite sponges with low thermal conductivity are prepared via a simple approach. The LS sponges were analyzed by various characterization methods. The content of laponite nanosheets in LS sponges has a great influence on the microstructure, comprehensive mechanical properties, and thermal conductivity. LS sponges feature (i) high mechanical strength, compressibility, and elasticity, (ii) excellent superhydrophobicity/superoleophilicity, and (iii) low thermal conductivity. Consequently, LS sponges could be used for water purification, for example, oil/water separation and solar-driven interfacial evaporation in combination with carbon nanotubes (CNTs). The LS/CNTs solar evaporator has a remarkable evaporation rate of 1.77 kg m^-2 h^-1 for the 3.5 wt % NaCl aqueous solution under 1 kW m^-2 irradiation and high salt resistance. We foresee that this study will promote the development of new 3D porous materials and their applications.

Organic-Inorganic Hybrid Luminescent Hydrogel Glued by a Cationic Polymeric Binder

Luminescent hydrogels have shown great potential in many fields, such as lighting, display, imaging, and sensing, because of their unique optical properties, biocompatibility, and easy processing. Organic-inorganic hybrid self-assembly can not only enhance the hydrogels' mechanical strength, but also retain their self-healing ability. Herein, a luminescent supramolecular hydrogel is reported, which is formed via self-assembly of the negatively charged Laponite nanosheets and cationic lanthanide coordination polymer. The corresponding results reveal that the multiple binding interaction between Laponite and the polymeric binder is vital for improving the mechanical performance of the obtained luminescent supramolecular hydrogel.

Color-Tunable Aqueous Room-Temperature Phosphorescence Supramolecular Assembly

Developing room-temperature phosphorescence (RTP) materials with color-tunability performance in an aqueous environment is crucial for application in optoelectronic areas to a higher stage, such as multicolor display, visual detection of external stimulus, and high-level information anticounterfeiting, but still faces a formidable challenge. Herein, we propose an efficient design strategy to develop excitation wavelength-responsive RTP supramolecular co-assembly systems of a simple benzoic acid derivative and Laponite (Lap) clay nanoplates in aqueous solution, displaying an ultralong lifetime (0.632 s) and a high phosphorescence quantum efficiency (18.04%) simultaneously. Experimental and theoretical research studies suggest that this distinctive feature is due to the generation of more and efficient intersystem crossing pathways benefiting from the coexistence of isolated and J-aggregation states via controlling the doping of the benzoic acid derivative and the inhibition of phosphorescence quenching by water because of the synergistic effects of robust hydrogen-bonding interactions between Lap and the benzoic acid derivative, J-aggregations of the benzoic acid derivative, and good oxygen tolerance of the Lap clay. By virtue of their excellent RTP performances in aqueous solution, the visual colorimetric detection of Ag⁺ in a water environment was achieved for the first time, and visible and high-level information encryption was accomplished as well.

Hybrid Pigments from Anthocyanin Analogues and Synthetic Clay Minerals

Flavylium cations are synthetic analogues of anthocyanins, the natural plant pigments that are responsible for the majority of the red, blue, and purple colors of flowers, fruits, and leaves. Unlike anthocyanins, the properties and reactivity of flavylium cations can be manipulated by the nature and position of substituents on the flavylium cation chromophore. Currently, the most promising strategies for stabilizing the color of anthocyanins and flavylium cations appear to be to intercalate and/or adsorb them on solid surfaces and/or in confined spaces. We report here that hybrid pigments with improved thermal stability, fluorescence, and attractive colors are produced by the cation-exchange-mediated adsorption of flavylium cations (FL) on two synthetic clays, the mica-montmorillonite SYn-1, and the laponite SYnL-1. Compared to the FL/SYn-1 hybrid pigments, the FL/SYnL-1 pigments exhibited improved thermal stability as judged by color retention, better preferential adsorption of the cationic form of FL1 at neutral to mildly basic pH (pH 7-8), and lower susceptibility to color changes at pH 10. Although both clays adsorb the cationic form on their external surfaces, SYnL-1 gave more evidence of adsorption in the interlayer regions of the clay. This interlayer adsorption appears to be the contributing factor to the better properties of the FL/SYnL-1 hybrid pigments, pointing to this clay to be a promising inorganic matrix for the development of brightly colored, thermally more stable hybrid pigments based on cationic analogues of natural plant pigments.

Tailoring a hybrid three-component photoinitiating system for 3D printing

In the field of additive manufacturing DLP vat technologies are promising 3D printing techniques. The need of highly efficient photoiniating systems drives us to the development of photocyclic 3-component initiators. In order to improve the 3D printing sensitivity, we present in this paper the use of synthesized clay to tune up the photochemistry underlying the initiating radical production. Therefore, a three-component initiating system, based on a cationic dye, two coinitiators and with a clay filler suitable for DLP 3D printing of acrylate resins leading to high quality of parts and low printing time, is developed.

Chameleon Luminophore for Erasable Encrypted and Decrypted Devices: From Dual-Channel, Programmable, Smart Sensory Lanthanide Hydrogel to Logic Devices

With the rapid development of the data security technology, increasing attention has been paid to programmable memory materials with desirable security. However, most conventional memory devices only have a single switchable color state. In this research, a kind of pH-responsive Chameleon luminescent sensor (Lap@Eu-OFX, Lap = laponite, OFX = ofloxacin) based on lanthanide doping has been fabricated, which can realize highly contrast, dynamically controlled full-color display by changing the pH value of the solution. The advanced programmable security inks, including the green and red luminescent inks, have been prepared and used to protect confidential information. More interestingly, triethylamine and hydrochloric acid are selected as encryption and decryption reagents, which can repeatedly switch the emission color of important data. Hence, the high-tech security inks show great potential in data coding, multiencryption, and decryption under UV light. Furthermore, the designed dual-channel memory device, Lap@Eu-OFX@CS (CS = Chitosan), enables reversible synchronous switching of sol-gel and emission color when converting from acid to base conditions. This can be dynamically monitored by a subsequent logic gate system and can be converted and stored into binary values. This work provides an effective approach for the design and promising application of information encryptor, smart monitor, and circuit controllers.

Proton-Activated Amorphous Room-Temperature Phosphorescence for Humidity Sensing and High-Level Data Encryption

Supramolecular co-assembling terpyridine-derivatives with nanoclay (LP) are exploited to acquire efficient amorphous room-temperature phosphorescence (RTP). Experimental and theoretical investigations reveal that this co-assembly not only brings about a configuration transformation from the trans-trans (a) to the cis-trans (a'') form via the protonating process, significantly narrowing the singlet-triplet energy gap, thereby effectively facilitating the single-triplet ISC processes, but also well protects the triplet state and suppresses the nonradiative transitions via restricting molecular rotation and vibration by the hydrogen-bond interactions between them. Additionally, the flexible and transparent films, through co-assembling 1@LP (or 2@LP) with polyvinyl alcohol (PVA), also display excellent phosphorescence performance. Owing to their distinctive RTP performances, the RH sensing and high-level data encryption are achieved.

Laponite-based Nanomaterials for Biomedical Applications: A Review

Laponite based nanomaterials (LBNMs) are highly diverse regarding their mechanical, chemical, and structural properties, coupled with shape, size, mass, biodegradability and biocompatibility. These ubiquitous properties of LBNMs make them appropriate materials for extensive applications. These have enormous potential for effective and targeted drug delivery comprised of numerous biodegradable materials which results in enhanced bioavailability. Moreover, the clay material has been explored in tissue engineering and bioimaging for the diagnosis and treatment of various diseases. The material has been profoundly explored for minimized toxicity of nanomedicines. The present review compiled relevant and informative data to focus on the interactions of laponite nanoparticles and application in drug delivery, tissue engineering, imaging, cell adhesion and proliferation, and in biosensors. Eventually, concise conclusions are drawn concerning biomedical applications and identification of new promising research directions.

Macroscale Biomolecular Electronics and Ionics

The conduction of ions and electrons over multiple length scales is central to the processes that drive the biological world. The multidisciplinary attempts to elucidate the physics and chemistry of electron, proton, and ion transfer in biological charge transfer have focused primarily on the nano- and microscales. However, recently significant progress has been made on biomolecular materials that can support ion and electron currents over millimeters if not centimeters. Likewise, similar transport phenomena in organic semiconductors and ionics have led to new innovations in a wide variety of applications from energy generation and storage to displays and bioelectronics. Here, the underlying principles of conduction on the macroscale in biomolecular materials are discussed, highlighting recent examples, and particularly the establishment of accurate structure-property relationships to guide rationale material and device design. The technological viability of biomolecular electronics and ionics is also discussed.

Luminescence resonance energy transfer in hybrid materials based on terbium(iii) complex, rhodamine B and nanoclay

We prepared a novel kind of luminescent hydrogel based on the combination of terbium(iii) complexes and rhodamine B dye with the LAPONITE® nanoclay.

Supramolecular Organization in Confined Nanospaces

Empty spaces are abhorred by nature, which immediately rushes in to fill the void. Humans have learnt pretty well how to make ordered empty nanocontainers, and to get useful products out of them. When such an order is imparted to molecules, new properties may appear, often yielding advanced applications. This review illustrates how the organized void space inherently present in various materials: zeolites, clathrates, mesoporous silica/organosilica, and metal organic frameworks (MOF), for example, can be exploited to create confined, organized, and self-assembled supramolecular structures of low dimensionality. Features of the confining matrices relevant to organization are presented with special focus on molecular-level aspects. Selected examples of confined supramolecular assemblies - from small molecules to quantum dots or luminescent species - are aimed to show the complexity and potential of this approach. Natural confinement (minerals) and hyperconfinement (high pressure) provide further opportunities to understand and master the atomistic-level interactions governing supramolecular organization under nanospace restrictions.

A novel visual ratiometric fluorescent sensing platform for highly-sensitive visual detection of tetracyclines by a lanthanide- functionalized palygorskite nanomaterial

A palygorskite (Pal)-based ratiometric fluorescent nanoprobe is designed in order to establish a real time, on-site visual, and highly sensitive detection method for tetracyclines (TCs). The nanoprobe comprises the green emissive dye molecules embedded in the natural Pal, which serve as the internal reference signal. The potential red-emissive seed-europium (Eu³⁺) ions are covalently bound on the surface of modified Pal, and they can act as the specific recognition element. The emission intensity of Eu³⁺ ions significantly increases upon TC addition. The nanoprobe fluorescence changes from green to yellow, orange, or red, thereby accomplishing the visual ratiometric fluorescent detection. This nanoprobe exhibits a high sensitivity with a detection limit of 7.1nM and an excellent selectivity in monitoring the levels of TCs in milk samples. In addition, this nanoprobe is useful for quantitative determination of TCs, and it is not affected with intensity fluctuations due to instrumental or environmental factors. The nanoprobe-immobilized test paper realizes real-time TCs analysis by using a smartphone with an easy-to-access color-scanning APP as the detection platform. Moreover, the reported construction of visual ratiometric detection system follows the sustainable development idea, that is, from nature, for nature, and into the nature.

Laponite-Based Surfaces with Holistic Self-Cleaning Functionality by Combining Antistatics and Omniphobicity

In the present work, perfluoroalkylated laponite nanoparticles with a high degree of functionalization (60 wt %) have been prepared and a methodology to prepare transparent, antistatic, and omniphobic laponite-based films with holistic self-cleaning properties against liquids, solids and liquid-solid mixtures has been developed. The intrinsic electrical and ionic conductivities observed in unmodified laponite coatings are combined with perfluoroalkyl-modified laponite clays. As a result, films with improved self-cleaning functionality based on dust-repellency and omniphobic liquid-repellence (sheet resistance in the range of 10⁷ Ω/□ and contact angles of 106° (H₂O) and 93° (oil)) were obtained. These unique films, being capable to repel dust and liquids, were applied to a variety of substrates (i.e., glass and plastics) and tested against solids and liquids of different nature with excellent performance. Bending tests of these holistic self-cleaning films deposited over flexible substrates showed better mechanical performance than unmodified laponite films.

Spectroscopic Studies of the Interactions between a Cationic Cyanine Dye and a Synthetic Phyllosilicate: From Photophysics to Hybrid Materials

The interaction of the cationic organic dye Astrazon orange R (AO-R) with the synthetic phyllosilicate Laponite leads to very interesting hybrid materials. Indeed, the Laponite nanoparticles modify the photophysical properties of AO-R, inducing a stabilization of its excited emissive state by preventing ultrafast isomerization. The long-lived emissive clay-dye hybrid complex can be used to develop efficient photoinitiating systems, leading to organic-inorganic hybrid crosslinked polymer materials.

Monitoring of nanoclay-protein adsorption isotherms via fluorescence techniques

The investigation of nanoparticles and their interaction with bio-macromolecules have become an important issue; the widely discussed protein corona around nanoparticles and their biological fate in general have drawn particular attention. Here, we focus on nanoclay dispersions and the use of solvatochromic fluorescent dyes (Dansyl and Coumarin 153) for monitoring the interaction with two model proteins, bovine serum albumin and β-lactoglobulin. On one hand, these dyes are poorly emissive in water, but experience a boost in their fluorescence when adsorbed into the hydrophobic domains of proteins. On the other hand, (nano)clays and clay minerals have previously been investigated in terms of their individual protein adsorption isotherms and their usefulness for the solubilization of water-insoluble dyes into an aqueous environment. In the following, we have combined all three individual parts (nanoclay, fluorophore and protein) in dispersions in a wide range of concentration ratios to systematically study the various adsorption processes via fluorescence techniques. In order to clarify the extent of dye diffusion and adsorption-desorption equilibria in the investigations, nanoclay hybrids with an adsorbed dye (Coumarin 153) and a covalently conjugated dye (Dansyl) were compared. The results suggest that the fluorescence progression of protein titration curves correlate with the amount of protein adsorbed, matching their reported adsorption isotherms on hectorite clays. Furthermore, experimental data on the protein monolayer formation around the nanoclays could be extracted due to only minor alterations of the dispersions' optical quality and transparency. In this manner, a fluorescence-based monitor for the formation of the globular protein layer around the nanoclay was realized.

LAPONITE®-stabilized iron oxide nanoparticles for in vivo MR imaging of tumors

We report the synthesis, characterization and utilization of LAPONITE®-stabilized magnetic iron oxide nanoparticles (LAP-Fe3O4 NPs) as a high performance contrast agent for in vivo magnetic resonance (MR) detection of tumors. In this study, Fe3O4 NPs were synthesized by a facile controlled coprecipitation route in LAP solution, and the formed LAP-Fe3O4 NPs have great colloidal stability and about 2-fold increase of T2 relaxivity than Fe3O4 NPs (from 247.6 mM(-1) s(-1) to 475.9 mM(-1) s(-1)). Moreover, cytotoxicity assay and cell morphology observation demonstrate that LAP-Fe3O4 NPs display good biocompatibility in the given Fe concentration range, and in vivo biodistribution results prove that NPs can be metabolized and cleared out of the body. Most importantly, LAP-Fe3O4 NPs can not only be used as a contrast agent for MR imaging of cancer cells in vitro due to the effective uptake by tumor cells, but also significantly enhance the contrast of a xenografted tumor model. Therefore, the developed LAP-based Fe3O4 NPs with good colloidal stability and exceptionally high transverse relaxivity may have tremendous potential in MR imaging applications.

Colorful Superamphiphobic Coatings with Low Sliding Angles and High Durability Based on Natural Nanorods

Superamphiphobic coatings with low sliding angles (SAs) and high durability are very attractive in academic and industrial areas but are very challenging to invent. Here, inspired by Maya Blue, we report for the first time colorful superamphiphobic coatings with low SAs and high durability by the combination of natural palygorskite (PAL) nanorods and organosilanes. The coatings were characterized using a wide range of electron microscopy and other analytical techniques. Different from the previously reported methods, the micro/nanostructure of the superamphiphobic coatings were constructed by using the abundant natural PAL nanorods as the building blocks. Superamphiphobicity of the coatings depends on surface morphology and chemical composition of the coatings, which can be regulated by the concentrations of PAL and organosilanes. The colorful superamphiphobic coatings feature high contact angles and low SAs for various liquids, including water and n-decane. The coatings also showed high mechanical, environmental, chemical, and thermal durability even under harsh conditions. Moreover, the coatings in different colors with comparable superamphiphobicity and durability can be prepared using different cationic dyes applied onto various substrates via the same approach. The colorful superamphiphobic coatings with low SAs and high durability may be useful in various fields, e.g., anticreeping of oils and restoration of cultural relics.

Peptizing Mechanism at the Molecular Level of Laponite Nanoclay Gels

In the presence of additives such as etidronic acid (1-hydroxyethane-1,1-diphosphonic acid, HEDP), a process of peptizing of Laponite clay gels takes place. The peptizing process at the molecular level was directly revealed by ³¹P and ¹H high-resolution magic-angle sample spinning (HRMAS) NMR spectroscopy. Two NMR spectral components were detected and assigned to free etidronic acid and bound to the Laponite disk edges. Furthermore, with increase of temperature the ratio of bound-to-free etidronic acid increases. This thermal activation process could be explained by the increase in electrical polarization of the hydroxyl group at the edges and by the exfoliation of the tactoids that leads to more access to the additive molecules to the electrical charges of platelet edges. ³¹P HRNMR spectroscopy on sodium fluorohectorite with an aspect ratio of ∼750 shows a reduction of the bound etidronic acid molecules. Transmission electron microscopy (TEM), field-emission scanning microscopy (FESEM), UV-vis spectrophotometry, dynamic light scattering (DLS), and zeta potential results support the proposed peptizing mechanisms.

Fabrication and Optimization of Stable, Optically Transparent, and Reusable pH-Responsive Silk Membranes

The fabrication of silk-based membranes that are stable, optically transparent and reusable is yet to be achieved. To address this bottleneck we have developed a method to produce transparent chromogenic silk patches that are optically responsive to pH. The patches were produced by blending regenerated silk fibroin (RSF), Laponite RD (nano clay) and the organic dyes neutral red and Thionine acetate. The Laponite RD played a central role in the patch mechanical integrity and prevention of dye leaching. The process was optimized using a factorial design to maximize the patch response to pH by UV absorbance and fluorescence emission. New patches of the optimized protocol, made from solutions containing 125 μM neutral red or 250 μM of Thionine and 15 mg/mL silk, were further tested for operational stability over several cycles of pH altering. Stability, performance, and reusability were achieved over the tested cycles. The approach could be extended to other reporting molecules or enzymes able to bind to Laponite.

Highly Fluorescent dye-nanoclay Hybrid Materials Made from Different Dye Classes

Nanoclays like laponites, which are commercially avaible in large quantities for a very moderate price, provide a facile solubilization strategy for hydrophobic dyes without the need for chemical functionalization and can act as a carrier for a high number of dye molecules. This does not require reactive dyes, amplifies fluorescence signals from individual emitters due to the high number of dyes molecules per laponite disk, and renders hydrophobic emitters applicable in aqueous environments. Aiming at the rational design of bright dye-loaded nanoclays as a new class of fluorescent reporters for bioanalysis and material sciences and the identification of dye structure-property relationships, we screened a series of commercial fluorescent dyes, differing in dye class, charge, and character of the optical transitions involved, and studied the changes of their optical properties caused by clay adsorption at different dye loading concentrations. Upon the basis of our dye loading density-dependent absorption and fluorescence measurements with S2105 and Lumogen F Yellow 083, we could identify two promising dye-nanoclay hybrid materials that reveal high fluorescence quantum yields of the nanoclay-adsorbed dyes of at least 0.20 and low dye self-quenching even at high dye-loading densities of up to 50 dye molecules per laponite platelet.

Fine tuning of the pH-sensitivity of laponite-doxorubicin nanohybrids by polyelectrolyte multilayer coating

Despite the wide research done in the field, the development of advanced drug delivery systems with improved drug delivery properties and effective anticancer capability still remains a great challenge. Based on previous work that showed the potentialities of the nanoclay Laponite as a pH-sensitive doxorubicin (Dox) delivery vehicle, herein we report a simple method to modulate its extent of drug release at different pH values. This was achieved by alternate deposition of cationic poly(allylamine) hydrochloride and anionic poly(sodium styrene sulfonate) (PAH/PSS) polyelectrolytes over the surface of Dox-loaded Laponite nanoparticles using the electrostatic layer-by-layer (LbL) self-assembly approach. The successful formation of polyelectrolyte multilayer-coated Dox/Laponite systems was confirmed by Dynamic Light Scattering and zeta potential measurements. Systematic studies were performed to evaluate their drug release profiles and anticancer efficiency. Our results showed that the presence of the polyelectrolyte multilayers improved the sustained release properties of Laponite and allowed a fine tuning of the extension of drug release at neutral and acidic pH values. The cytotoxicity presented by polyelectrolyte multilayer-coated Dox/Laponite systems towards MCF-7 cells was in accordance with the drug delivery profiles. Furthermore, cellular uptake studies revealed that polyelectrolyte multilayer-coated Dox/Laponite nanoparticles can be effectively internalized by cells conducting to Dox accumulation in cell nucleus.

Selective Inactivation of Resistant Gram-Positive Pathogens with a Light-Driven Hybrid Nanomaterial

Herein, we present a straightforward strategy to disperse highly insoluble photosensitizers in aqueous environments, without major synthetic efforts and keeping their photosensitizing abilities unaffected. A layered nanoclay was employed to adsorb and to solubilize a highly efficient yet hydrophobic Si(IV) phthalocyaninate in water. The aggregation of the photoactive dye was correlated with its photophysical properties, particularly with the ability to produce highly cytotoxic singlet oxygen. Moreover, the resulting hybrid nanomaterial is able to selectively photoinactivate Gram-positive pathogens, due to local interactions between the bacterial membranes and the negatively charged nanodiscs. Nanotoxicity assays confirmed its innocuousness toward eukaryotic cells, showing that it constitutes a new class of "phototriggered magic bullet" for the inactivation of pathogens in phototherapy, as well as in the development of coatings for self-disinfecting surfaces.

An Indigo Carmine-Based Hybrid Nanocomposite with Supramolecular Control of Dye Aggregation and Photobehavior

Zn-Al layered double hydroxides (LDHs) containing solely indigo carmine (IC) or 1-hexanesulfonate (HS) anions, or a mixture of the two with different HS/IC molar ratios, were prepared by the direct synthesis method and characterized by various techniques. Hydrotalcite-type phases were obtained with basal spacings of 17.6 Å for the LDH intercalated by IC (IC-LDH) and 18.2-18.3 Å for the other materials containing HS. From the basal spacing for IC-LDH and UV/Vis spectroscopic data, it is proposed that the dye molecules assemble within the interlayer galleries to form a J-type stacking arrangement. A comprehensive electronic spectral and photophysical study was undertaken for IC in solution and all materials, aiming to obtain a detailed characterization of the host-guest and guest-guest interactions. In solution (the solvent surrounded "isolated" molecule), IC presents a fast excited state proton transfer with rate constants of ∼1.2-1.4×10(11)  s(-1) , which is linked to the very efficient radiationless deactivation channel. In the solid state it is shown that incorporation of IC within the LDH decreases the level of aggregation, and that further addition of HS induces the appearance of isolated IC units within the LDH galleries. The indigo carmine-based nanocomposites reported constitute a step forward in the design of hybrid materials with tunable properties.

Europium(III)-β-diketonate complex-containing nanohybrid luminescent pH detector

In this work, by loading an Eu(3+)-β-diketonate complex into LAPONITE®, we report an organic-inorganic hybrid pH detection system Eu(3+)(TTA)n@Lap that is valid under acid conditions, which can serve as highly robust, reliable, rapid responsive and sensitive fluorescent pH detector. In addition, this hybrid pH detector can be easily recovered and reused by simply treating with Et3N vapor.

Luminescence enhancement after adding organic salts to nanohybrid under aqueous condition

Lanthanide-based organic-inorganic hybrid materials (LnOIH) are of immense importance for various applications nowadays, while it still remains a significant challenge to achieve high luminescence efficiency in aqueous environment. Herein we present a simple and environmentally friendly two-step strategy to prepare strongly red-light emitting nano-LnOIH by first in situ forming Eu(3+)-β-dikeonate complexes on Laponite platelets and subsequently increasing the coordination number of the complexes via the modification with a silane-functionalized imidazolium salt, which can fully protect Eu(3+) ions from the water molecule quenching. The mechanism of how the imidazolium salt favors the formation of Eu(3+)-β-dikeonate complex with large coordination number was elucidated. The result is that the removal of the abundant protons on the Laponite platelets through a mechanism of synergic effect of ion exchange and neutralization drives the formation of Eu(3+)-β-diketonate complexes with high coordination number. The high efficiency of the resulting luminescent nano-LnOIH in water endows the nanohybrid with good aqueous solution processability and opens the possibility of using them under complicated aqueous conditions for biorelated applications.

Modification of Eu3+–beta-diketonate complex-intercalated LAPONITE® with a terpyridine-functionalized ionic liquid

A lanthanide complex-based hybrid material with good thermal- and photo-stability has been obtained by modifying Eu³⁺–beta-diketonate complex-intercalated LAPONITE® with a terpyridine moiety-functionalized ionic liquid.

Phthalocyanine blue in aqueous solutions

Natively insoluble, unsubstituted Cu(II) phthalocyanines can be solubilised in water by the aid of nano-clays as colloidal α-CuPc and monomeric CuPc.

Water-dispersible and stable fluorescent Maya Blue-like pigments

Water-dispersible and stable fluorescent Maya Blue-like pigments were prepared via the host–guest interaction between LAPONITE® RD and Pigment Red 31.

Photophysical efficiency-boost of aqueous aluminium phthalocyanine by hybrid formation with nano-clays

Aluminium phthalocyanines, solubilized by nano-clay shuttles, retain high fluorescence efficiencies and singlet oxygen generation capabilities in aqueous ambience, qualifying them for photodynamic therapies.

On the interaction of triarylmethane dye crystal violet with LAPONITE® clay: using mineral nanoparticles to control the dye photophysics

The combination of an organic dye with clays leads to very interesting hybrid materials with original properties.

The osteogenic differentiation of SSEA-4 sub-population of human adipose derived stem cells using silicate nanoplatelets

How to surpass in vitro stem cell differentiation, reducing cell manipulation, and lead the in situ regeneration process after transplantation, remains to be unraveled in bone tissue engineering (bTE). Recently, we showed that the combination of human bone marrow stromal cells with bioactive silicate nanoplatelets (sNPs) promotes the osteogenic differentiation without the use of standard osteogenic inductors. Even more, using SSEA-4(+) cell-subpopulations (SSEA-4(+)hASCs) residing within the adipose tissue, as a single-cellular source to obtain relevant cell types for bone regeneration, was also proposed. Herein, sNPs were used to promote the osteogenic differentiation of SSEA-4(+)hASCs. The interactions between SSEA-4(+)hASCs and sNPs, namely the internalization pathway and effect on cells osteogenic differentiation, were evaluated. SNPs below 100 μg/mL showed high cytocompatibility and fast internalization via clathrin-mediated pathway. SNPs triggered an overexpression of osteogenic-related markers (RUNX2, osteopontin, osteocalcin) accompanied by increased alkaline phosphatase activity and deposition of a predominantly collagen-type I matrix. Consequently, a robust matrix mineralization was achieved, covering >90% of the culturing surface area. Overall, we demonstrated the high osteogenic differentiation potential of SSEA-4(+)hASCs, further enhanced by the addition of sNPs in a dose dependent manner. This strategy endorses the combination of an adipose-derived cell-subpopulation with inorganic compounds to achieve bone matrix-analogs with clinical relevance.

Facile preparation of stable palygorskite/cationic red X-GRL@SiO2“Maya Red” pigments

We report the fabrication of stable “Maya Red” pigments with a purple-red hue by adsorption of cationic red X-GRL (CR-XGRL) onto palygorskite, which is followed by hydrolysis and polycondensation of tetraethoxysilaneviaa modified Stöber method to form a layer of SiO₂.

Nile-Red-nanoclay hybrids: red emissive optical probes for use in aqueous dispersion

Water-dispersible and (bio)functionalizable nanoclays have a considerable potential as inexpensive carriers for organic molecules like drugs and fluorophores. Aiming at simple design strategies for red-emissive optical probes for the life sciences from commercial precursors with minimum synthetic effort, we systematically studied the dye loading behavior and stability of differently functionalized laponites. Here, we present a comprehensive study of the absorption and emission properties of the red emissive hydrophobic and neutral dye Nile Red, a well-known polarity probe, which is almost insoluble and nonemissive in water. Adsorption of this probe onto disk-shaped nanoclays was studied in aqueous dispersion as function of dye concentration, in the absence and presence of the cationic surfactant cetyltrimethylammonium bromide (CTAB) assisting dye loading, and as a function of pH. This laponite loading strategy yields strongly fluorescent nanoclay suspensions with a fluorescence quantum yield of 0.34 at low dye loading concentration. The dye concentration-, CTAB-, and pH-dependent absorption, fluorescence emission, and fluorescence excitation spectra of the Nile-Red-nanoclay suspensions suggest the formation of several Nile Red species including emissive Nile Red monomers facing a polar environment, nonemissive H-type dimers, and protonated Nile Red molecules that are also nonfluorescent. Formation of all nonemissive Nile Red species could be suppressed by modification of the laponite with CTAB. This underlines the great potential of properly modified and functionalized laponite nanodisks as platform for optical probes with drug delivery capacities, for example, for tumor and therapy imaging. Moreover, comparison of the Nile Red dimer absorption spectra with absorption spectra of previously studied Nile Red aggregates in dendrimer systems and micelles and other literature systems reveals a considerable dependence of the dimer absorption band on microenvironment polarity which has not yet been reported so far for H-type dye aggregates.