Narrowly Dispersed Hydrophilic Molecularly Imprinted Polymer Nanoparticles for Efficient Molecular Recognition in Real Aqueous Samples Including River Water, Milk, and Bovine Serum

The Amount of Cross-Linker Influences Affinity and Selectivity of NanoMIPs Prepared by Solid-Phase Polymerization Synthesis

The cross-linker methylene-bis-acrylamide is usually present in nanoMIPs obtained by solid-phase polymerization synthesis at 2 mol% concentration, with very few exceptions. Here, we studied the influence of variable amounts of methylene-bis-acrylamide in the range between 0 (no cross-linker) and 50 mol% concentration on the binding properties of rabbit IgG nanoMIPs. The binding parameters were determined by equilibrium binding experiments and the results show that the degree of cross-linking defines three distinct types of nanoMIPs: (i) those with a low degree of cross-linking, including nanoMIPs without cross-linker (0-05 mol%), showing a low binding affinity, high density of binding sites, and low selectivity; (ii) nanoMIPs with a medium degree of cross-linking (1-18 mol%), showing higher binding affinity, low density of binding sites, and high selectivity; (iii) nanoMIPs with a high degree of cross-linking (32-50 mol%), characterized by non-specific nanopolymer-ligand interactions, with low binding affinity, high density of binding sites, and no selectivity. In conclusion, the results are particularly relevant in the synthesis of high-affinity, high-selectivity nanoMIPs as they demonstrate that a significant gain in affinity and selectivity could be achieved with pre-polymerization mixtures containing quantities of cross-linker up to 10-20 mol%, well higher than those normally used in this technique.

Molecularly Imprinted Polymer Nanospheres with Hydrophilic Shells for Efficient Molecular Recognition of Heterocyclic Aromatic Amines in Aqueous Solution

Heterocyclic aromatic amine molecularly imprinted polymer nanospheres with surface-bound dithioester groups (haa-MIP) were firstly synthesized via reversible addition-fragmentation chain transfer (RAFT) precipitation polymerization. Then, a series of core-shell structural heterocyclic aromatic amine molecularly imprinted polymer nanospheres with hydrophilic shells (MIP-HSs) were subsequently prepared by grafting the hydrophilic shells on the surface of haa-MIP via on-particle RAFT polymerization of 2-hydroxyethyl methacrylate (HEMA), itaconic acid (IA), and diethylaminoethyl methacrylate (DEAEMA). The haa-MIP nanospheres showed high affinity and specific recognition toward harmine and its structural analogs in organic solution of acetonitrile, but lost the specific binding ability in aqueous solution. However, after the grafting of the hydrophilic shells on the haa-MIP particles, the surface hydrophilicity and water dispersion stability of the polymer particles of MIP-HSs greatly improved. The binding of harmine by MIP-HSs with hydrophilic shells in aqueous solutions is about two times higher than that of NIP-HSs, showing an efficient molecular recognition of heterocyclic aromatic amines in aqueous solution. The effect of hydrophilic shell structure on the molecular recognition property of MIP-HSs was further compared. MIP-PIA with carboxyl groups containing hydrophilic shells showed the highest selective molecular recognition ability to heterocyclic aromatic amines in aqueous solution.

Efficient Optosensing of Hippuric Acid in the Undiluted Human Urine with Hydrophilic "Turn-On"-Type Fluorescent Hollow Molecularly Imprinted Polymer Microparticles

The development of complex biological sample-compatible fluorescent molecularly imprinted polymers (MIPs) with improved performances is highly important for their real-world bioanalytical and biomedical applications. Herein, we report on the first hydrophilic "turn-on"-type fluorescent hollow MIP microparticles capable of directly, highly selectively, and rapidly optosensing hippuric acid (HA) in the undiluted human urine samples. These fluorescent hollow MIP microparticles were readily obtained through first the synthesis of core-shell-corona-structured nitrobenzoxadiazole (NBD)-labeled hydrophilic fluorescent MIP microspheres by performing one-pot surface-initiated atom transfer radical polymerization on the preformed "living" silica particles and subsequent removal of their silica core via hydrofluoric acid etching. They showed "turn-on" fluorescence and high optosensing selectivity and sensitivity toward HA in the artificial urine (the limit of detection = 0.097 μM) as well as outstanding photostability and reusability. Particularly, they exhibited much more stable aqueous dispersion ability, significantly faster optosensing kinetics, and higher optosensing sensitivity than their solid counterparts. They were also directly used for quantifying HA in the undiluted human urine with good recoveries (96.0%-102.0%) and high accuracy (RSD ≤ 4.0%), even in the presence of several analogues of HA. Such fluorescent hollow MIP microparticles hold much promise for rapid and accurate HA detection in the clinical diagnostic field.

Water-compatible Janus molecularly imprinted particles with mouth-like opening: Rapid removal of pharmaceuticals from hospital effluents

Pharmaceuticals in hospital effluents, often discharged into the public sewage network without sufficient treatment, have shown negative impacts to the human health and aquatic environment. However, the conventional adsorbents used to remove these micropollutants had several deficiencies, including slow uptake kinetics and poor selectivity. To overcome these challenges, water-compatible Janus MIP particles (J-MIPs) with mouth-like openings were synthesized using seeded interfacial polymerization in this work. Among the series of J-MIPs, the selected J-MIP₃ showed fast binding kinetics (∼40 s) towards the target pollutant. The theoretical and instrumental analysis suggested that the electrostatic interaction, hydrogen bond and hydrophobic reaction constituted the dominant mechanism for J-MIP₃'s recognition of target pharmaceutical. Selectivity and robustness tests indicated that the synthetic method was promising in practical application. Finally, the feasibility of the J-MIP₃ fixed-bed column in the rapid removal of propranolol (PRO) from hospital effluents was successfully demonstrated. Compared to the activated carbon fixed-bed column, the J-MIP₃ fixed-bed column showed at least 7-fold enhancement in its treatment efficiency. To the best of our knowledge, this is the first time that the accelerated mass transfer and fast removal of the pharmaceutical from wastewater have been achieved by the synthetic receptor with asymmetric structure. We believe the present study will open new avenues for the development of multi-functional molecularly imprinted polymers as well as Janus materials in environmental science.

One-step synthesis of well-defined molecularly imprinted nanospheres for the class-selective recognition and separation of β-blockers in human serum

β-blockers are a class of medications that are used to treat abnormal heart rhythms and hypertension. Molecularly imprinted polymers (MIPs) capable of selective recognizing and extracting β-blockers from complex biological samples hold great promise in bioanalytical and biomedical applications, but developing such artificial receptor materials is still challenging. Herein, we introduce a simple one-step method for the synthesis of well-defined molecularly imprinted nanospheres in high yield (83.6-94.4%) via reversible addition-fragmentation chain transfer (RAFT) precipitation polymerization for the selective recognition and extraction of the β-blockers from human serum. The prepared MIPs are characterized in terms of morphology, pore properties, binding kinetics, capacity, selectivity, and recognition mechanisms. The uniform nanoscale-imprinted layer favored the rapid mass transfer of β-blockers. The binding studies showed the high adsorption capacity (126.8 μmol/g) and selectivity of the developed nanomaterial. The investigation on the recognition mechanism reveals that multiple driving forces participate in the binding between MIP and β-blockers, where hydrogen bonding plays as the dominating role for the specific recognition. The MIP was successfully applied for the direct enrichment of five β-blockers from human serum with HPLC recoveries ranging from 82.9 to 100.3% and RSD of 0.5-6.9% (n = 3).

Biological sample-compatible Au nanoparticle-containing fluorescent molecularly imprinted polymer microspheres by combining RAFT polymerization and Au-thiol chemistry

The development of biological sample-compatible fluorescent molecularly imprinted polymers (MIPs) with more functions and/or improved performance is of great importance for various bioanalytical and biomedical applications, but remains challenging. Herein,...

Pyrrolidinyl ligand motif-assisted bovine serum albumin molecularly imprinted polymers with high specificity

Ideal binding ligands for anchoring proteins are essential for the design and assembly of desirable molecularly imprinted polymers (MIPs). In this study, bovine serum albumin-MIPs (BSA-MIPs) were successfully prepared by orchestrating the involvement of orientation-controllable binding ligands via sequential thiol-ene click and thiol-ene-amine conjugation. We showed that the optimal thiol-ene-amine conjugates and binding ligands were decisive in determining the rebinding capacity and selectivity. The pyrrolidinyl MIPs exhibited the best adsorption capacity of 352 ± 22 mg/g and a superior imprinting factor of 4.72 among MIPs with various binding ligands. These favourable results were further studied by computational simulation and isothermal titration calorimetry (ITC). Molecular docking revealed the preferential binding free energy and H-bonds between BSA residues and the thiol-ene-amine conjugates. Meanwhile, the pyrrolidinyl ligand motif enabled entropy-favourable affinity to be achieved via hydrophobic effects with the BSA template by ITC thermodynamics. Because of these favourable bindings, the MIPs exhibited excellent adsorption specificity to BSA over competing proteins. The proof-of-concept of MIPs with orientation-controllable conjugates and proven binding ligands for target proteins demonstrates that this material is promising for use with a real biological sample.

Water-Compatible Fluorescent Molecularly Imprinted Polymers

Preparation of molecularly imprinted polymers (MIPs) capable of directly and selectively recognizing small organic analytes in aqueous samples (particularly in the undiluted complex biological samples) is described. Such water-compatible MIPs can be readily obtained by the controlled grafting of appropriate hydrophilic polymer brushes onto the MIP particle surfaces. Two types of synthetic approaches (i.e., "two-step approach" and "one-step approach") for preparing complex biological sample-compatible hydrophilic fluorescent MIP nanoparticles and their applications for direct, selective, sensitive, and accurate optosensing of an antibiotic (i.e., tetracycline (Tc)) in the undiluted pure bovine/porcine serums are presented.

Molecularly imprinted dispersive solid-phase microextraction sorbents for direct and selective drug capture from the undiluted bovine serum

The preparation of well-defined new hydrophilic molecularly imprinted polymer (MIP) microspheres and their use as the dispersive solid-phase microextraction (dSPME) sorbents for direct and selective drug (i.e., propranolol) capture from the undiluted bovine serum are described. These MIPs have surface-grafted dense poly(2-hydroxyethyl methacrylate) (PHEMA) brushes with different molecular weights and grafting densities. They were readily prepared via the facile reversible addition-fragmentation chain transfer (RAFT) coupling chemistry. Both the molecular weights and grafting densities of PHEMA brushes showed significant influence on their complex biological sample-compatibility, and only those MIPs bearing PHEMA brushes with high enough molecular weights and grafting densities could selectively recognize propranolol in the undiluted pure milk and bovine serum. In particular, they have proven to be highly versatile dSPME sorbents for directly and selectively capturing propranolol from the undiluted bovine serum with satisfactory recoveries (85.2-97.4%) and high accuracy (RSD = 2.3-3.7%), even in the presence of one analogue of propranolol. The limit of detection was 0.002 μM with a linear correlation coefficient of 0.9994 in the range of 0.01-100 μM. Excellent precision was verified by both the intraday and interday analytical results. Their good reusability was also confirmed. This work demonstrates the high potential of such hydrophilic MIP-based dSPME sorbents for rapid, accurate, and reliable drug determination in complex biological samples.

Selective recognition of a cyclic peptide hormone in human plasma by hydrazone bond-oriented surface imprinted nanoparticles

As a kind of artificial recognition material, molecularly imprinted polymers (MIPs) offer a promising perspective to be developed as synthetic chemical binders capable of selectively recognize biomacromolecules. However, owing to the large size and conformational flexibility of proteins and peptides, imprinting of these biomacromolecules remains a challenge. Novel imprinting strategies still need exploration for the improvement of recognition performance of MIPs. Herein, we developed a hydrazone bond-oriented surface imprinting strategy for an endogenous peptide hormone, human atrial natriuretic peptide (ANP). Surface-oriented imprinting of peptide via reversible covalent bond anchoring approach increased the orientation homogeneity of imprinted cavities as well as the utility of templates. The prepared nanoparticles exhibited high selectivity and fast recognition kinetics for ANP epitope. The dissociation constant between ANP epitope and MIP was measured as 5.3 μM. The applicability of the material in real samples was verified by the selective magnetic extraction of ANP from human plasma samples. This hydrazone bond-oriented surface imprinting strategy provides an alternative approach for the separation of peptides or proteins in complex bio-samples.

Advances in epitope molecularly imprinted polymers for protein detection: a review

Epitope molecularly imprinted polymers (EMIPs) are novel imprinted materials using short characteristic peptides as templates rather than entire proteins. To be specific, the amino acid sequence of the template peptide is the same as an exposed N- or C-terminus of a target protein, or its amino acid composition and sequence replicate a similar conformational arrangement as the same amino acid residues on the surface of the target protein. EMIPs have a good application prospect in protein research. Herein, we focus on classification of epitope imprinting techniques, methods of epitope immobilization on matrix materials including boronate affinity immobilization, covalent bonding immobilization, physical adsorption immobilization and metal ion chelation immobilization, and application of EMIPs in peptides, proteins, target imaging and target therapy fields. Finally, the main problems and future development are summarized.

Metal-Organic Gel-Modulated Synthesis of Hierarchically Porous Molecularly Imprinted Polymers for Efficient Removal of Sildenafil from Water

Molecularly imprinted polymers (MIPs) with high specific recognition capability are promising in environmental remediation. However, traditional MIPs usually show poor specific binding affinity toward templates in pure aqueous medium, thus greatly limiting their practical applications in wastewater treatment. Herein, we proposed a facile and versatile method to synthesize a water-compatible hierarchically porous MIP (HP-MIP), in which a metal-organic gel (MOG) was formed by in situ assembly and acted as a removable structural modulator. Remarkably, the integration of the MOG modulator and template imprinting defects significantly improved the specific template binding affinity of HP-MIP in water. The adsorption behavior of HP-MIP fitted well with the heterogeneous Freundlich isotherm, suggesting that HP-MIP possessed greater site heterogeneity to sildenafil than HP-NIP, which confirmed the efficiency of HP-MIP for the removal of sildenafil from water. This approach provides an important pathway to prepare water-compatible porous MIP for efficient removal of highly toxic organic pollutants from wastewater.

Biological Sample-Compatible Ratiometric Fluorescent Molecularly Imprinted Polymer Microspheres by RAFT Coupling Chemistry

Ratiometric fluorescent molecularly imprinted polymer (MIP) sensors hold great promise in many bioanalytical areas because of their high sensitivity and selectivity as well as excellent self-referencing and visual detection capability. However, their synthetic strategies are rather limited and the development of such optosensing MIPs that can directly and selectively quantify small organic analytes in complex biological samples remains a formidable challenge owing to the complexity of sample matrices. Herein, a versatile and modular strategy to obtaining well-defined ratiometric fluorescent MIP microspheres capable of directly and selectively detecting an organic herbicide [2,4-dichlorophenoxyacetic acid (2,4-D)] in undiluted pure milks is described. First, it involves the synthesis of uniform "living" polymer particles via RAFT precipitation polymerization, their successive well-controlled grafting of a polymer shell labeled with red CdTe QDs (being inert to 2,4-D) and an MIP shell labeled with green 4-nitrobenzo[c][1,2,5]oxadiazole (NBD) units (showing fluorescence "light-up" upon binding 2,4-D) via surface-initiated RAFT polymerization, and final grafting of hydrophilic poly(N-isopropylacrylamide) brushes via an efficient coupling reaction (i.e., RAFT coupling chemistry). The resulting hydrophilic dual fluorescent MIP particles showed excellent photostability and reusability. They exhibited obvious analyte binding-induced "turn-on"-type ratiometric fluorescence (and color) change and high 2,4-D optosensing selectivity and sensitivity in pure bovine milk (with a detection limit of 0.13 μM). Moreover, they were directly applied to 2,4-D determination in undiluted pure goat milk with good recoveries (96.0-103.2%) and high accuracy (RSD = 1.5-5.5%), even in the presence of several analogues of 2,4-D. The general applicability of our strategy was also demonstrated. This study paves the way for efficiently developing various advanced MIP optosensors (of easily tunable structures and desired properties) highly promising in many bioanalytical applications.

Molecularly Imprinted Micelles for Fluorescent Sensing of Nonsteroidal Anti-Inflammatory Drugs (NSAIDs)

Nonsteroidal anti-inflammatory drugs (NSAIDs) are widely used over-the-counter drugs and their uncontrolled disposal is a significant environmental concern. Although their fluorescent sensing is a desirable method of detection for its sensitivity and simplicity, the structural similarity of the drugs makes the design of selective sensors highly challenging. A thiourea-based fluorescent functional monomer was identified in this work to enable highly efficient synthesis of molecularly imprinted nanoparticle (MINP) sensors for NSAIDs such as Indomethacin or Tolmetin. Micromolar binding affinities were obtained in aqueous solution, with binding selectivities comparable to those reported for polyclonal antibodies. The detection limit was ~50 ng/mL in aqueous solution, and common carboxylic acids such as acetic acid, benzoic acid, and citric acid showed negligible interference.

Microsphere Polymers in Molecular Imprinting: Current and Future Perspectives

Molecularly imprinted polymers (MIPs) are specific crosslinked polymers that exhibit binding sites for template molecules. MIPs have been developed in various application areas of biology and chemistry; however, MIPs have some problems, including an irregular material shape. In recent years, studies have been conducted to overcome this drawback, with the synthesis of uniform microsphere MIPs or molecularly imprinted microspheres (MIMs). The polymer microsphere is limited to a minimum size of 5 nm and a molecular weight of 10,000 Da. This review describes the methods used to produce MIMs, such as precipitation polymerisation, controlled/'Living' radical precipitation polymerisation (CRPP), Pickering emulsion polymerisation and suspension polymerisation. In addition, some green chemistry aspects and future perspectives will also be given.

Silanized carbon dot-based thermo-sensitive molecularly imprinted fluorescent sensor for bovine hemoglobin detection

Using the surface molecular imprinting technique, a thermo-sensitive molecularly imprinted fluorescent sensor was constructed for bovine hemoglobin (BHb) detection with the silanized carbon dots (CD@SiO₂) as fluorescent signal, N-isopropylacrylamide as monomer sensitive to temperature, and BHb as template. The silanized carbon dots coated by the molecularly imprinted polymer (CD@SiO₂@MIP) were characterized by high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and fluorescence spectroscopy. Owing to the combination of the strong fluorescence sensitivity of CDs and the high selectivity of the molecular imprinting shell, the prepared sensor showed good recognition and detection performance to the target protein BHb, with a linear range of 0.31-1.55 μM and a detection limit of 1.55 μM. Furthermore, the sensor was utilized to detect the content of BHb in real urine with a recovery of 98.6-100.5%. The CD@SiO₂@MIP sensors present a high potential for applications in the detection of BHb in biological systems. Graphical abstract.

Molecularly Imprinted Synthetic Antibodies: From Chemical Design to Biomedical Applications

Billions of dollars are invested into the monoclonal antibody market every year to meet the increasing demand in clinical diagnosis and therapy. However, natural antibodies still suffer from poor stability and high cost, as well as ethical issues in animal experiments. Thus, developing antibody substitutes or mimics is a long-term goal for scientists. The molecular imprinting technique presents one of the most promising strategies for antibody mimicking. The molecularly imprinted polymers (MIPs) are also called "molecularly imprinted synthetic antibodies" (MISAs). The breakthroughs of key technologies and innovations in chemistry and material science in the last decades have led to the rapid development of MISAs, and their molecular affinity has become comparable to that of natural antibodies. Currently, MISAs are undergoing a revolutionary transformation of their applications, from initial adsorption and separation to the rising fields of biomedicine. Herein, the fundamental chemical design of MISAs is examined, and then current progress in biomedical applications is the focus. Meanwhile, the potential of MISAs as qualified substitutes or even to transcend the performance of natural antibodies is discussed from the perspective of frontier needs in biomedicines, to facilitate the rapid development of synthetic artificial antibodies.

Selective Binding of Dopamine and Epinephrine in Water by Molecularly Imprinted Fluorescent Receptors

Catecholamines play important roles in biology but their structural similarity makes it challenging to construct synthetic receptors with selective binding. A combination of covalent and noncovalent binding groups in the hydrophobic core of water-soluble nanoparticles enabled them to recognize dopamine and epinephrine with an association constant (Ka ) of 3-4×104  M-1 in water, an order of magnitude higher than those of previously reported synthetic hosts. In addition, minute structural changes among analogues were detected including the addition or removal of a single hydroxyl or methyl group.

Complex polymer architectures through free-radical polymerization of multivinyl monomers

The construction of complex polymer architectures with well-defined topology, composition and functionality has been extensively explored as the molecular basis for the development of modern polymer materials. The unique reaction kinetics of free-radical polymerization leads to the concurrent formation of crosslinks between polymer chains and rings within an individual chain and, thus, free-radical (co)polymerization of multivinyl monomers provides a facile method to manipulate chain topology and functionality. Regulating the relative contribution of these intermolecular and intramolecular chain-propagation reactions is the key to the construction of architecturally complex polymers. This can be achieved through the design of new monomers or by spatially or kinetically controlling crosslinking reactions. These mechanisms enable the synthesis of various polymer architectures, including linear, cyclized, branched and star polymer chains, as well as crosslinked networks. In this Review, we highlight some of the contemporary experimental strategies to prepare complex polymer architectures using radical polymerization of multivinyl monomers. We also examine the recent development of characterization techniques for sub-chain connections in such complex macromolecules. Finally, we discuss how these crosslinking reactions have been engineered to generate advanced polymer materials for use in a variety of biomedical applications.

Emerging functional materials based on chemically designed molecular recognition

The specific interactions responsible for molecular recognition play a crucial role in the fundamental functions of biological systems. Mimicking these interactions remains one of the overriding challenges for advances in both fundamental research in biochemistry and applications in material science. However, current molecular recognition systems based on host–guest supramolecular chemistry rely on familiar platforms (e.g., cyclodextrins, crown ethers, cucurbiturils, calixarenes, etc.) for orienting functionality. These platforms limit the opportunity for diversification of function, especially considering the vast demands in modern material science. Rational design of novel receptor-like systems for both biological and chemical recognition is important for the development of diverse functional materials. In this review, we focus on recent progress in chemically designed molecular recognition and their applications in material science. After a brief introduction to representative strategies, we describe selected advances in these emerging fields. The developed functional materials with dynamic properties including molecular assembly, enzyme-like and bio-recognition abilities are highlighted. We have also selected materials with dynamic properties in contract to traditional supramolecular host–guest systems. Finally, the current limitations and some future trends of these systems are discussed.

Fluorescence Self-Reporting Precipitation Polymerization Based on Aggregation-Induced Emission for Constructing Optical Nanoagents

Precipitation polymerization is becoming increasingly popular in energy, environment and biomedicine. However, its proficient utilization highly relies on the mechanistic understanding of polymerization process. Now, a fluorescence self-reporting method based on aggregation-induced emission (AIE) is used to shed light on the mechanism of precipitation polymerization. The nucleation and growth processes during the copolymerization of a vinyl-modified AIEgen, styrene, and maleic anhydride can be sensitively monitored in real time. The phase-separation and dynamic hardening processes can be clearly discerned by tracking fluorescence changes. Moreover, polymeric fluorescent particles (PFPs) with uniform and tunable sizes can be obtained in a self-stabilized manner. These PFPs exhibit biolabeling and photosensitizing abilities and are used as superior optical nanoagents for photo-controllable immunotherapy, indicative of their great potential in biomedical applications.

Well-defined hydrophilic "turn-on"-type ratiometric fluorescent molecularly imprinted polymer microspheres for direct and highly selective herbicide optosensing in the undiluted pure milks

Molecularly imprinted polymer (MIP)-based optosensing materials capable of direct, reliable, and highly selective detection of small organic analytes in complex aqueous samples hold great promise in many bioanalytical applications, but their development remains a challenging task. Addressing this issue, well-defined hydrophilic "turn-on"-type ratiometric fluorescent MIP microspheres are developed via a versatile and modular strategy based on the controlled/"living" radical polymerization method. Its general principle was demonstrated by the synthesis of red CdTe quantum dot (QD)-labeled silica particles with surface-bound atom transfer radical polymerization (ATRP)-initiating groups via the one-pot sol-gel reaction and their successive grafting of a thin fluorescent 2,4-D (an organic herbicide)-MIP layer (labeled with green organic fluorophores bearing both nitrobenzoxadiazole (NBD) and urea interacting groups) and hydrophilic poly(glyceryl monomethacrylate) (PGMMA) brushes via surface-initiated ATRP. The introduction of PGMMA brushes and rationally selected dual fluorescence labeling (i.e., red CdTe QDs being inert to 2,4-D and green NBD showing fluorescence "light-up" upon binding 2,4-D) onto MIP particles afforded them excellent complex aqueous sample-compatibility (due to their largely enhanced hydrophilicity) and analyte binding-induced "turn-on"-type ratiometric fluorescence changes, respectively. Such advanced MIP particles proved to be promising optosensing materials, which had a detection limit of 0.13 μM and showed obvious fluorescent color change upon binding different concentrations of 2,4-D in the undiluted pure milk. Moreover, they were successfully applied for direct and highly selective quantification of 2,4-D in the undiluted pure goat and bovine milks with good recoveries (97.9%-104.5%), even in the presence of several analogues of 2,4-D.

Molecularly Imprinted Nanoparticles for Biomedical Applications

Molecularly imprinted polymers (MIPs) are synthetic receptors with tailor-made recognition sites for target molecules. Their high affinity and selectivity, excellent stability, easy preparation, and low cost make them promising substitutes to biological receptors in many applications where molecular recognition is important. In particular, spherical MIP nanoparticles (or nanoMIPs) with diameters typically below 200 nm have drawn great attention because of their high surface-area-to-volume ratio, easy removal of templates, rapid binding kinetics, good dispersion and handling ability, undemanding functionalization and surface modification, and their high compatibility with various nanodevices and in vivo biomedical applications. Recent years have witnessed significant progress made in the preparation of advanced functional nanoMIPs, which has eventually led to the rapid expansion of the MIP applications from the traditional separation and catalysis fields to the burgeoning biomedical areas. Here, a comprehensive overview of key recent advances made in the preparation of nanoMIPs and their important biomedical applications (including immunoassays, drug delivery, bioimaging, and biomimetic nanomedicine) is presented. The pros and cons of each synthetic strategy for nanoMIPs and their biomedical applications are discussed and the present challenges and future perspectives of the biomedical applications of nanoMIPs are also highlighted.

Visual Simultaneous Detection of Hepatitis A and B Viruses Based on a Multifunctional Molecularly Imprinted Fluorescence Sensor

Simultaneous detection of large viruses has been a great obstacle in the field of molecular imprinting. In this work, for the first time, a multifunctional molecularly imprinted sensor for single or simultaneous determination of hepatitis A virus (HAV) and hepatitis B virus (HBV) is provided. Visual detection was realized due to the color of green and red quantum dots that varied with the concentration of the target substance. The combination of hydrophilic monomers and metal chelation reduced the nonspecific binding and enhanced the specificity of adsorption. As a result, satisfactory selectivity and sensitivity were obtained for the detection of the two viruses, with imprinting factors of 3.70 and 3.35 for HAV and HBV, and limits of detection of 3.4 and 5.3 pmol/L, respectively, that were achieved within 20 min. The excellent recoveries during simultaneous detection and single detection modes indicate the prominent ability of the proposed sensor to detect HAV and HBV in human serum and the potential ability to simultaneously detect multiple viruses in real applications.

Zwitterionic Molecularly Imprinted Cross-Linked Micelles for Alkaloid Recognition in Water

Molecular imprinting within surface/core doubly cross-linked micelles afforded water-soluble nanoparticle receptors for their template molecules. Extremely strong imprinting effects were consistently observed, with the imprinting factor >100:1 in comparison to nonimprinted nanoparticles prepared without the templates. The ionic nature of the cross-linkable surfactant strongly impacted the imprinting and binding process. Imprinted receptors prepared with a zwitterionic cross-linkable surfactant (4) outperformed a similar cationic one (1) when the template was zwitterionic or cationic and preferred their templates over structural analogues regardless of their ionic characteristics. Electrostatic interactions, however, dominated the receptors made with the cationic surfactant. The same micellar imprinting applied to simple as well as complex alkaloids. Imprinted receptors from 4 were also shown to categorize their alkaloid guests according to their structural similarity.

Effects of nano-confinement and conformational mobility on molecular imprinting of cross-linked micelles

Molecular imprinting is a facile method to create guest-complementary binding sites in a cross-linked polymeric network. When performed within cross-linked micelles, the resulting molecularly imprinted nanoparticles (MINPs) exhibited an extraordinary ability to distinguish subtle structural changes in the guest, including the shift of a hydrophilic or hydrophobic group by 1 carbon and addition of a single methylene/methyl group. A high surface-cross-linking density prior to core-cross-linking was key to the high-fidelity imprinting, enhancing both the binding affinity of the imprinted micelle for the template and selectivity among structural analogues. Whereas the imprinted site closely complemented the hydrophilic surface anchoring group and rigid hydrophobic aromatic core, it was expanded significantly for a conformationally mobile small group (i.e., methoxy).

Water compatible imprinted polymer prepared in water for selective solid phase extraction and determination of ciprofloxacin in real samples

A novel water compatible ciprofloxacin imprinted polymer is synthesized in water via a green, non-toxic and environmentally friendly polymerization process. Hydrophilic groups, including anionic chlorine, hydroxyl, and carbonyl oxygen provided by a bifunctional monomer comprising 1-allyl-3-vinylimidazole chloride and 2-hydroxyethyl methacrylate, are introduced into the imprinted material, which allows the polymer to interact strongly with imprinting molecule via hydrogen bonds, electrostatic and π-π dipole interactions in aqueous solution. Rebinding experiments show that the obtained molecularly imprinted polymer (MIP) presents special molecular recognition towards quinolone antibiotics (ciprofloxacin, levofloxacin and pefloxacin mesylate) in aqueous matrices. The adsorption process of ciprofloxacin on MIP and non-imprinted polymer (NIP) substrates involves spontaneous exothermic reactions, and the maximum rebinding capacities of ciprofloxacin on MIP and NIP at 25 °C are 19.96 and 8.86 mg g^-1, respectively. The excellent selectivity and hydrophilicity of this imprinted polymer makes it suitable for use as an adsorbent in solid phase extraction. Under the optimized conditions, the presented MIP-SPE protocol exhibits a wide linear range between 0.29 and 1.47 × 10⁵ μg L^-1 and has been successfully applied for the separation and enrichment of trace ciprofloxacin in real water, soil and pork samples with satisfactory recoveries of 87.33-102.50%. The proposed study implies the promising prospect of this green and water compatible MIP in highly effective recognition and separation of trace quinolones in complex matrics.

Synthetic nanoparticles for selective hydrolysis of bacterial autoinducers in quorum sensing

N-acyl homoserine lactones (AHLs) are signal molecules used by a large number of gram-negative bacteria in quorum sensing and their hydrolysis is known to inhibit biofilm formation. Micellar imprinting of AHL-like templates with catalytic functional monomers yielded water-soluble nanoparticles with AHL-shaped active site and nearby catalytic groups. Either Lewis acidic zinc ions or nucleophilic pyridyl ligands could be introduced through this strategy, yielding artificial enzymes for the hydrolysis of AHLs in a substrate-selective fashion.

Well-defined biological sample-compatible molecularly imprinted polymer microspheres by combining RAFT polymerization and thiol–epoxy coupling chemistry

A versatile approach to obtaining well-defined biological sample-compatible MIP microspheres by combining RAFT polymerization and thiol–epoxy coupling chemistry is described.

A versatile strategy to fabricate magnetic dummy molecularly imprinted mesoporous silica particles for specific magnetic separation of bisphenol A

m-DMIMSP showed an ordered mesoporous structure, favorable magnetic property, good accessibility and affinity, and excellent binding selectivity towards BPA.

Glycan-Imprinted Magnetic Nanoparticle-Based SELEX for Efficient Screening of Glycoprotein-Binding Aptamers

Nucleic acid aptamers, as useful alternatives of antibodies, have found a large range of promising applications such as affinity separation and bioassays. The screening of aptamers is critical for their applications. Aptamers are often screened by an in vitro methodology called SELEX (systematic evolution of ligands by exponential enrichment). Although numerous SELEX methods have been established to facilitate the selection, new efficient selection methods are still much needed. Molecularly imprinted polymers, which are antibody alternatives at the material level and competitors of aptamers, have not been used as a platform for aptamer selection yet so far. In this study, a glycan-imprinted magnetic nanoparticles (MNPs)-based SELEX was developed to efficiently screen aptamers against glycoproteins. Glycan-imprinted MNPs were used as an affinity interface to bind target glycoprotein, and then the target glycoprotein-bound MNPs were used as an affinity substrate for aptamer selection. The glycan-imprinted MNPs were synthesized by a state-of-the-art imprinting approach called boronate affinity controllable oriented surface imprinting. The glycan-imprinted MNPs exhibited high affinity and specificity and therefore allowed preferential binding toward target glycoproteins while excluding unwanted species. Two representative glycoproteins, including RNase B and transferrin, were employed as target glycoproteins, and aptamers with high affinity and specificity toward the two target glycoproteins were screened out in 3 rounds. This method exhibited some merits, such as high affinity, fast speed, and avoiding negative screening. Therefore, the glycan-imprinted MNP-based SELEX approach holds great values for the efficient screening of high-performance aptamers.

Tuning surface-cross-linking of molecularly imprinted cross-linked micelles for molecular recognition in water

Molecular recognition in water is an important challenge in supramolecular chemistry. Surface-core double cross-linking of template-containing surfactant micelles by the click reaction and free radical polymerization yields molecularly imprinted nanoparticles (MINPs) with guest-complementary binding sites. An important property of MINP-based receptors is the surface-cross-linking between the propargyl groups of the surfactants and a diazide cross-linker. Decreasing the number of carbons in between the two azides enhanced the binding affinity of the MINPs, possibly by keeping the imprinted binding site more open prior to the guest binding. The depth of the binding pocket can be controlled by the distribution of the hydrophilic/hydrophobic groups of the template and was found to influence the binding in addition to electrostatic interactions between oppositely charged MINPs and guests. Cross-linkers with an alkoxyamine group enabled two-stage double surface-cross-linking that strengthened the binding constants by an order of magnitude, possibly by expanding the binding pocket of the MINP into the polar region. The binding selectivity among very similar isomeric structures also improved.