Pd-catalyzed C-H olefination of (hetero)arenes by using saturated ketones as an olefin source

Potent Anthelmintic Activity of Chalcones Synthesized by an Effective Green Approach

There is currently an urgent need for new anthelmintic agents due to increasing resistance to the limited available drugs. The chalcone scaffold is a privileged structure for developing new drugs and has been shown to exhibit potential antiparasitic properties. We synthesized a series of chalcones via Claisen-Schmidt condensation, introducing a novel recoverable catalyst derived from biochar obtained from the pyrolysis of tree pruning waste. Employing microwave irradiation and a green solvent, this approach demonstrated significantly reduced reaction times and excellent compatibility with various functional groups. The result was the generation of a library of functionalized chalcones, exhibiting exclusive (E)-selectivity and high to excellent yields. The chalcone derivatives were evaluated on the free-living nematode Caenorhabditis elegans. The chalcone scaffold, along with two derivatives incorporating a methoxy substituent in either ring, caused a concentration-dependent decrease of worm motility, revealing potent anthelmintic activity and spastic paralysis not mediated by the nematode levamisole-sensitive nicotinic receptor. The combination of both methoxy groups in the chalcone scaffold resulted in a less potent compound causing worm hypermotility at the short term, indicating a distinct molecular mechanism. Through the identification of promising drug candidates, this work addresses the demand for new anthelmintic drugs while promoting sustainable chemistry.

Towards bioresource-based aggregation-induced emission luminogens from lignin β-O-4 motifs as renewable resources

One-pot synthesis of heterocyclic aromatics with good optical properties from phenolic β-O-4 lignin segments is of high importance to meet high value added biorefinery demands. However, executing this process remains a huge challenge due to the incompatible reaction conditions of the depolymerization of lignin β-O-4 segments containing γ-OH functionalities and bioresource-based aggregation-induced emission luminogens (BioAIEgens) formation with the desired properties. In this work, benzannulation reactions starting from lignin β-O-4 moieties with 3-alkenylated indoles catalyzed by vanadium-based complexes have been successfully developed, affording a wide range of functionalized carbazoles with up to 92% yield. Experiments and density functional theory calculations suggest that the reaction pathway involves the selective cleavage of double C-O bonds/Diels-Alder cycloaddition/dehydrogenative aromatization. Photophysical investigations show that these carbazole products represent a class of BioAIEgens with twisted intramolecular charge transfer. Distinctions of emission behavior were revealed based on unique acceptor-donor-acceptor-type molecular conformations as well as molecular packings. This work features lignin β-O-4 motifs with γ-OH functionalities as renewable substrates, without the need to apply external oxidant/reductant systems. Here, we show a concise and sustainable route to functional carbazoles with AIE properties, building a bridge between lignin and BioAIE materials.

Examining the Scope of Deriving β-Aryl Enones from Enol Silanes as Ketone Equivalents via Pd(II)-Mediated Sequential Dehydrosilylation and Arylation

Silyl enol ethers were examined as a masked source of saturated ketones to derive β-aryl enones and their derivatives by dehydrosilylation to generate enones in situ and subsequent oxidative arylation with arylboronic acids as transmetallation coupling partners using relayed Pd(II) catalysis in one pot under base-free conditions. Oxygen was found to be an efficient and green oxidant to enable both dehydrosilylation of enol silanes and arylation. Additionally, arylation conditions can be custom-designed to take advantage of aryl halides as an alternative source of arylating agents. The preparative scope was investigated with 35 examples (up to 95% yield), and mechanistic studies implied a cationic Pd(II)-based catalytic system.

Studies of Cytotoxicity Effects, SARS-CoV-2 Main Protease Inhibition, and in Silico Interactions of Synthetic Chalcones

SARS-CoV-2 main protease (M^pro ) plays an essential role in proteolysis cleavage that promotes coronavirus replication. Thus, attenuating the activity of this enzyme represents a strategy to develop antiviral agents. We report inhibitory effects against M^pro of 40 synthetic chalcones, and cytotoxicity activities, hemolysis, and in silico interactions of active compounds. Seven of them bearing a (E)-3-(furan-2-yl)-1-arylprop-2-en-1-one skeleton (10, 28, and 35-39) showed enzyme inhibition with IC₅₀ ranging from 13.76 and 36.13 μM. Except for 35 and 36, other active compounds were not cytotoxic up to 150 μM against THP-1 and Vero cell lines. Compounds 10, and 35-39 showed no hemolysis while 28 was weakly hemotoxic at 150 μM. Moreover, molecular docking showed interactions between compound 10 and M^pro (PDBID 5RG2 and 5RG3) with proximity to cys145 and His41, suggesting a covalent binding. Products of the reaction between chalcones and cyclohexanethiol indicated that this binding could be a Michael addition type.

Iridium-Catalyzed Intramolecular β-C-H Alkenylation of Ketones with Alkynes via a Hydride-Transfer Approach

Direct functionalization of carbonyl β C-H bonds without using directing groups has not been a trivial task, and it is even more challenging to realize the corresponding atom-economical transformations with common alkenes or alkynes as the coupling partner. Here, we describe the development of an iridium-catalyzed intramolecular direct β-alkenylation of ketones with regular alkynes. The reaction is redox neutral, avoids strong acids or bases, and tolerates various functional groups. The combined experimental and computational mechanistic studies reveal a hydride-transfer pathway, involving ketone α,β-desaturation, iridium-hydride-mediated alkyne insertion, conjugate addition, and α-protonation.

Copper-catalyzed [3+3] annulation of ketones with oxime acetates for the synthesis of pyridines

A novel and efficient copper-catalyzed strategy for the synthesis of diverse pyridines through the [3+3] annulation of ketones with oxime acetates has been reported. It is very convenient to obtain various unsymmetrical 2,6-diarylpyridines by changing different substrates. The rare copper-catalyzed direct difunctionalization of saturated ketones for the synthesis of nitrogen heterocycles is developed. This protocol has excellent functional group tolerance, readily available raw materials, high chemoselectivity and broad substrate scope.

Catalytic Dehydrogenative β-Alkylation of Amino Acid Schiff Bases with Hydrocarbon

A synthetic method for the synthesis of a highly congested α,β-dehydroamino acid through the β-C-H bond activation of an amino acid Schiff base is described. Abundant hydrocarbon feedstock could be used as an alkylating reagent to afford an α,β-dehydroamino acid bearing a quaternary carbon at the γ-position with an exclusively (Z)-geometry. Notably, a tetrasubstituted olefin could be constructed from saturated starting materials. The transformation of the synthesized α,β-dehydroamino acid into unnatural α-amino acid derivatives was also demonstrated.

Site-Selective Pd-Catalyzed C(sp3 )-H Arylation of Heteroaromatic Ketones

A ligand‐controlled site‐selective C(sp³)−H arylation of heteroaromatic ketones has been developed using Pd catalysis. The reaction occurred selectively at the α‐ or β‐position of the ketone side‐chain. The switch from α‐ to β‐arylation was realized by addition of a pyridone ligand. The α‐arylation process showed broad scope and high site‐ and chemoselectivity, whereas the β‐arylation was more limited. Mechanistic investigations suggested that α‐arylation occurs through C−H activation/oxidative addition/reductive elimination whereas β‐arylation involves desaturation and aryl insertion.

An Approach for the Synthesis of Pyrazolo[1,5-a]pyrimidines via Cu(II)-Catalyzed [3+3] Annulation of Saturated Ketones with Aminopyrazoles

A one-step synthesis of diversely substituted pyrazolo[1,5-a]pyrimidines from saturated ketones and 3-aminopyrazoles is presented. This transformation involves the in situ formation of α,β-unsaturated ketones via a radical process, followed by [3+3] annulation with 3-aminopyrazoles in one pot. Mechanistic studies have shown that the dual C(sp³)-H bond functionalization of inactive ketones is required for the formation of the title compounds. Notably, this dehydrogenative coupling process provides access to a host of functionalized pyrazolo[1,5-a]pyrimidines with antitumor potential from commercially available substrates.

Transformation of 3-(Furan-2-yl)-1,3-di(het)arylpropan-1-ones to Prop-2-en-1-ones via Oxidative Furan Dearomatization/2-Ene-1,4,7-triones Cyclization

The approach to 3-(furan-2-yl)-1,3-di(het)arylprop-2-en-1-ones based on the oxidative dearomatization of 3-(furan-2-yl)-1,3-di(het)arylpropan-1-ones followed by an unusual cyclization of the formed di(het)aryl-substituted 2-ene-1,4,7-triones has been developed. The cyclization step is related to the Paal-Knorr synthesis, but the furan ring formation is accompanied in this case by a formal shift of the double bond through the formation of a fully conjugated 4,7-hydroxy-2,4,6-trien-1-one system or its surrogate.

Synthesis of a New Class of Spirooxindole-Benzo[b]Thiophene-Based Molecules as Acetylcholinesterase Inhibitors

A series of new oxindole-based spiro-heterocycles bearing the benzo[b]thiophene motif were synthesized via a 1,3-dipolar cycloaddition reaction and their acetylcholinesterase (AChE) inhibitory activity was evaluated. All the synthesized compounds exhibited moderate inhibitory activities against AChE, while IIc was found to be the most active analog with an IC50 value of 20,840 µM·L-1. Its molecular structure was a 5-chloro-substituted oxindole bearing benzo[b]thiophene and octahydroindole moieties. Based on molecular docking studies, IIc was strongly bound to the catalytic and peripheral anionic sites of the protein through hydrophilic, hydrophobic, and π-stacking interactions with Asp74, Trp86, Tyr124, Ser125, Glu202, Ser203, Trp236, Trp286, Phe297, Tyr337, and Tyr341. These interactions also indicated that the multiplicity of the IIc aromatic core significantly favored its activity.

Carbonylative Suzuki-Miyaura cross-coupling by immobilized Ni@Pd NPs supported on carbon nanotubes

In this study, a novel carbon nanotube (CNT) based nanocatalyst (Ni@Pd/CNT) was synthesized by modifying CNTs using Ni@Pd core–shell nanoparticles (NPs). Ni@Pd/CNT was used in catalytic carbonylative cross-coupling between 4-iodoanisole and phenylboronic acid. The Ni@Pd NPs possessed a magnetic nickel (Ni) core with a palladium (Pd) structural composite shell. Thus, the use of Ni had led to a reduced consumption of Pd without sacrificing the overall catalytic performance, simultaneously making it reusable as it could be conveniently recovered from the reaction mixture by using an external magnetic field. Immobilization of the Ni@Pd NPs on carbon nanotubes not only prevented their aggregation, but also significantly enhanced the accessibility of the catalytically active sites. The abovementioned approach based on carbon nanotubes and Ni@Pd NPs provided a useful platform for the fabrication of noble-metal-based nanocatalysts with easy accessibility and low cost, which may allow for an efficient green alternative for various catalytic reductions.

In this study, a novel carbon nanotube (CNT) based nanocatalyst (Ni@Pd/CNT) was synthesized by modifying CNTs using Ni@Pd core–shell nanoparticles (NPs).

Copper-catalyzed dehydrogenative γ-C(sp3)-H amination of saturated ketones for synthesis of polysubstituted anilines

Metal-catalyzed β-C-H functionalization of saturated carbonyls via dehydrogenative desaturation proved to be a powerful tool for simplifying synthesis of valuable β-substituted carbonyls. Here, we report a copper-catalyzed dehydrogenative γ-C(sp3)-H amination of saturated ketones that initiates the three-component coupling of saturated ketones, amines and N-substituted maleimides to construct polysubstituted anilines. The protocol presented herein enables both linear and α-branched butanones to couple a wide spectrum of amines and various N-substituted maleimides to produce diverse tetra- or penta-substituted anilines in fair-to-excellent yields with good functional group tolerance. The mechanism studies support that this ketone dehydrogenative γ-C(sp3)-H amination was triggered by the ketone α,β-dehydrogenation desaturation that activates the adjacent γ-C(sp3)-H bond towards functionalization. This α,β-dehydrogenation desaturation-triggered cascade sequence opens up a new avenue to the remote C(sp3)-H functionalization of saturated ketones and has the potential to enable the rapid syntheses of complex compounds from simple starting materials.

Dehydrogenative β-Arylation of Saturated Aldehydes Using Transient Directing Groups

An unprecedented cross-dehydrogenative-coupling (CDC) reaction of saturated aldehyde β-C-H with arenes to form cinnamaldehydes via the cleavages of four C-H bonds has been developed. The reaction possesses complete E-stereoselectivity for the C═C double bond. The protocol is featured by atom and step economy, mild reaction conditions, and convenient operation.

Co(ii)/Cu(ii)-cocatalyzed oxidative C–H/N–H functionalization of benzamides with ketones: a facile route to isoindolin-1-ones

Co/Cu-cocatalyzed oxidative C–H/N–H annulation of amides with ketones is developed to synthesize isoindolin-1-ones.

Fe-Catalyzed enaminone synthesis from ketones and amines

A novel Fe-catalyzed β-functionalization of ketones with amines for constructing enaminones has been demonstrated.

An efficient 3-acylquinoline synthesis from acetophenones and anthranilviaC(sp3)–H bond activation mediated by Selectfluor

An efficient method for the synthesis of 3-functionalized quinolines from commercially available acetophenones and anthranil has been described. Selectfluor propels the C(sp³)–H bond activation of the acetophenones and aza-Michael addition of anthranil resulting in annulated 3-acylquinolines in moderate to high yields. DMSO acts not only as a solvent but also as a one carbon donor in the reaction.

An efficient method for the synthesis of 3-functionalized quinolines from acetophenones and anthranil mediated by Selectfluor was achieved.

Copper-Catalyzed Dehydrogenative Diels-Alder Reaction

A practical and effective copper-catalyzed dehydrogenative Diels-Alder reaction of gem-diesters and ketone with dienes has been established. The active dienophiles were generated in situ via a radical-based dehydrogenation process, which reacted with a wide variety of dienes to afford various polysubstituted cyclohexene derivatives in good to excellent yields.

Palladium-catalyzed dehydrogenative coupling of cyclic enones with thiophenes: a rapid access to β-heteroarylated cyclic enones

A dehydrogenative coupling reaction of cyclic enones with thiophenes through palladium-catalyzed C–H functionalization is reported herein. Further molecular transformations of the coupling products to synthetically useful meta-heteroarylated phenols are also demonstrated.

Copper-catalyzed α-C–H acyloxylation of carbonyl compounds with terminal alkynes

Herein, a copper/TBHP catalyst system for the α-C–H acyloxylation of carbonyl compounds is developed using terminal alkynes as the acyloxy source.

Copper(i)-catalyzed N–H olefination of sulfonamides for N-sulfonyl enaminone synthesis

A novel approach for synthesis of N-sulfonyl enaminones in one-step from saturated ketones and provide an entry into accessing functionalization at α- and β-position of carbonyl group simultaneously.

Dehydrogenative desaturation-relay via formation of multicenter-stabilized radical intermediates

In organic molecules, the reactivity at the carbon atom next to the functional group is dramatically different from that at other carbon atoms. Herein, we report that a versatile copper-catalyzed method enables successive dehydrogenation or dehydrogenation of ketones, aldehydes, alcohols, α,β-unsaturated diesters, and N-heterocycles to furnish stereodefined conjugated dienecarbonyls, polyenecarbonyls, and nitrogen-containing heteroarenes. On the basis of mechanistic studies, the copper-catalyzed successive dehydrogenation process proceeds via the initial α,β-desaturation followed by further dehydrogenative desaturation of the resultant enone intermediate, demonstrating that the reactivity at α-carbon is transferred through carbon–carbon double bond or longer π-system to the carbon atoms at the positions γ, ε, and η to carbonyl groups. The dehydrogenative desaturation–relay is ascribed to the formation of an unusual radical intermediate stabilized by 5- or 7,- or 9-center π-systems. The discovery of successive dehydrogenation may open the door to functionalizations of the positions distant from functional groups in organic molecules.

Synthesis of valuable polyene molecules under mild conditions and with good functional groups tolerance is of paramount importance. Here, the authors show the versatile copper-catalyzed successive dehydrogenation of a variety of organic substrates affording highly conjugated unsaturated products.

Ligand-Promoted Palladium-Catalyzed Aerobic Oxidation Reactions

Palladium-catalyzed aerobic oxidation reactions have been the focus of industrial application and extensive research efforts for nearly 60 years. A significant transition occurred in this field approximately 20 years ago, with the introduction of catalysts supported by ancillary ligands. The ligands play crucial roles in the reactions, including promotion of direct oxidation of palladium(0) by O₂, bypassing the typical requirement for Cu salts or related redox cocatalysts to facilitate oxidation of the reduced Pd catalyst; facilitation of key bond-breaking and bond-forming steps during substrate oxidation; and modulation of chemo-, regio-, or stereoselectivity of a reaction. The use of ligands has contributed to significant expansion of the scope of accessible aerobic oxidation reactions. Increased understanding of the role of ancillary ligands should promote the development of new synthetic transformations, enable improved control over the reaction selectivity, and improve catalyst activity and stability. This review surveys the different ligands that have been used to support palladium-catalyzed aerobic oxidation reactions and, where possible, describes mechanistic insights into the role played by the ancillary ligand.

Allyl-Palladium-Catalyzed Ketone Dehydrogenation Enables Telescoping with Enone α,β-Vicinal Difunctionalization

The telescoping of allyl-palladium catalyzed ketone dehydrogenation with organocuprate conjugate addition chemistry allows for the introduction of aryl, heteroaryl, vinyl, acyl, methyl, and other functionalized alkyl groups chemoselectively to a wide variety of unactivated ketone compounds via their enone counterparts. The compatibility of the dehydrogenation conditions additionally allows for efficient trapping of the intermediate enolate with various electrophiles. The utility of this approach is demonstrated by comparison to several previously reported multistep sequences.

China's flourishing synthetic organofluorine chemistry: innovations in the new millennium

The new millennium has witnessed the rapid development of synthetic organofluorine chemistry all over the world, and chemists in China have made significant contributions in this field. This review aims to provide a brief introduction to China's primary innovations from 2000 to early 2017, covering fluorination, fluoroalkylation, fluoromethylthiolation, fluoroolefination and polyfluoroarylation, as well as synthesis with fluorinated building blocks. Recent advances in the chemistry of difluorocarbene and the chemistry of carbon–fluorine bond activation are also discussed. As a conclusion, the review ends with some personal perspectives on the future development of China's synthetic organofluorine chemistry.

Synthesis of 3-acylquinolines through Cu-catalyzed double C(sp3)–H bond functionalization of saturated ketones

A novel synthesis of 3-acylquinolines through Cu-catalyzed one-pot reactions of 2-aminoaryl aldehydes/ketones with inactivated ketones featured with double C(sp³)–H bond functionalization is presented.

α,β-Functionalization of saturated ketones with anthranils via Cu-catalyzed sequential dehydrogenation/aza-Michael addition/annulation cascade reactions in one-pot

An efficient method to access functionalized quinolines from the readily available saturated ketones and anthranils have been explored.