Direct Deamination of Primary Amines by Water To Produce Alcohols

Manganese-Catalyzed Mono-N-Methylation of Aliphatic Primary Amines without the Requirement of External High-Hydrogen Pressure

The synthesis of mono-N-methylated aliphatic primary amines has traditionally been challenging, requiring noble metal catalysts and high-pressure H2 for achieving satisfactory yields and selectivity. Herein, we developed an approach for the selective coupling of methanol and aliphatic primary amines, without high-pressure hydrogen, using a manganese-based catalyst. Remarkably, up to 98 % yields with broad substrate scope were achieved at low catalyst loadings. Notably, due to the weak base-catalyzed alcoholysis of formamide intermediates, our novel protocol not only obviates the addition of high-pressure H2 but also prevents side secondary N-methylation, supported by control experiments and density functional theory calculations.

Sustainable amidation through acceptorless dehydrogenative coupling by pincer-type catalysts: recent advances

The amide functional group is ubiquitous in living organisms, and is of particular importance in bioactive compounds and pharmaceuticals. Because of the prevalence and significance of the amide bond, considerable efforts have been invested throughout the years in developing new synthetic methodologies for its formation. Nevertheless, amide synthesis still largely relies on variants of the traditional condensation of carboxylic acids and amines, mediated by stoichiometric coupling reagents. This poses a sustainability challenge, since such reactions suffer from unfavorable atom and step economies, involve harmful chemicals and produce chemical waste. Hence, establishing sustainable approaches to amide synthesis is of great importance. Over the last two decades, we have developed homogeneous catalytic reactions for sustainable synthetic transformations, primarily based on transition metal complexes of pincer ligands. A considerable portion of these efforts has been devoted to acceptorless dehydrogenative coupling, including that of alcohols and amines through ruthenium-catalyzed reactions. These latter processes generate amides without resorting to coupling reagents and typically produce no waste, with their only byproduct being H2 gas, which is itself a valuable resource. In the present review, we chronicle our progress in this area of research since 2014. This includes the use of water and ammonia as amidation reagents, expanding the scope of amidation substrates and target amides, achieving milder reaction conditions, development of amidation-based liquid organic hydrogen carrier systems, and introduction of manganese-based catalysts.

DBU-Promoted Deaminative Thiolation of 1H-Benzo[d]imidazol-2-amines and Benzo[d]oxazol-2-amines

A facile and efficient catalyst-/metal-/oxidant-free DBU-promoted deaminative thiolation reaction of 1H-benzo[d]imidazol-2-amines and benzo[d]oxazol-2-amines has been developed at room temperature conditions in a one-pot protocol. This practical three-component strategy represents a novel and environmentally friendly reaction pathway toward the straightforward synthesis of various 2-thio-1H-benzo[d]imidazoles and 2-thiobenzo[d]oxazoles using carbon disulfide as a sulfur source through C-N bond cleavage and C-S bond formation process. Different types of 1H-benzo[d]imidazol-2-amines, benzo[d]oxazol-2-amines, and organic bromides are suitable substrates. The gram-scale and late-stage modification experiments provide the potential applications based on this methodology in the field of organic and medicinal chemistry.

Oxidation of Organic Compounds Using Water as the Oxidant with H2 Liberation Catalyzed by Molecular Metal Complexes

Oxidation reactions of organic compounds play a central role in both industrial chemical and material synthesis as well as in fine chemical and pharmaceutical synthesis. While traditional laboratory-scale oxidative syntheses have relied on the use of strong oxidizers, modern large-scale oxidation processes preferentially utilize air or pure O₂ as an oxidant, with other oxidants such as hydrogen peroxide, nitric acid, and aqueous chlorine solution also being used in some processes. The use of molecular oxygen or air as an oxidant has been very attractive in recent decades because of the abundance of air and the lack of wasteful byproduct generation. Nevertheless, the use of high-pressure air or, in particular, pure oxygen can lead to serious safety concerns with improper handling and also necessitates the use of sophisticated high-pressure reactors for the processes.Several research groups, including ours, have investigated in recent times the possibility of carrying out catalytic oxidation reactions using water as the formal oxidant, with no added conventional oxidants. Along with the abundant availability of water, these processes also generate dihydrogen gas as the reaction coproduct, which is a highly valuable fuel. Several well-defined molecular metal complexes have been reported in recent years to catalyze these unusual oxidative reactions with water. A ruthenium bipyridine-based PNN pincer complex was reported by us to catalyze the oxidation of primary alcohols to carboxylate salts with alkaline water along with H₂ liberation, followed by reports by other groups using other complexes as catalysts. At the same time, ruthenium-, iridium-, and rhodium-based complexes have been reported to catalyze aldehyde oxidation to carboxylic acids using water. Our group has combined the catalytic aqueous alcohol and aldehyde oxidation activity of a ruthenium complex to achieve the oxidation of biomass-derived renewable aldehydes such as furfural and 5-hydroxymethylfurfural (HMF) to furoic acid and furandicarboxylic acid (FDCA), respectively, using alkaline water as the oxidant, liberating H₂. Ruthenium complexes with an acridine-based PNP ligand have also been employed by our group for the catalytic oxidation of amines to the corresponding lactams, or to carboxylic acids via a deaminative route, using water. Similarly, we also reported molecular complexes for the catalytic Markovnikov oxidation of alkenes to ketones using water, similar to Wacker-type oxidation, which, however, does not require any terminal oxidant and produces H₂ as the coproduct. At the same time, the oxidation of enol ethers to the corresponding esters with water has also been reported. This account will highlight these recent advances where water was used as an oxidant to carry out selective oxidation reactions of organic compounds, catalyzed by well-defined molecular complexes, with H₂ liberation. The oxidation of alcohols, aldehydes, amines, alkenes, and enol ethers will be discussed to provide an outlook toward other functional groups' oxidation. We hope that this will aid researchers in devising other oxidative dehydrogenative catalytic systems using water, complementing traditional oxidative processes involving strong oxidants and molecular oxygen.

Sustainable catalysis with fluxional acridine-based PNP pincer complexes

Because of the widespread use of fossil fuels and the resulting global warming, development of sustainable catalytic transformations is now more important than ever to obtain our desired fuels and building materials with the least carbon footprint and waste production. Many sustainable (de)hydrogenation reactions, including CO2 reduction, H2 carrier systems, and others, have been reported using molecular pincer complexes. A specific subset of pincer complexes containing a central acridine donor with flanking CH2PR2 ligands, known as acridine-based PNP pincer complexes, exhibit special reactivities that are not imitable by other PNP pincer complexes such as pyridine-based or (R2PCH2CH2)2NH type ligands. The goal of this article is to highlight the unique reactivities of acridine-based complexes and then investigate how these reactivities allow these complexes to catalyse many sustainable reactions that traditional pincer complexes cannot catalyse. To that end, we will initially go over the synthesis and structural features of acridine complexes, such as the labile coordination of the central N donor and the observed fac-mer fluxionality. Following that, distinct reactivity patterns of acridine-based complexes including their reactivity with acids and water will be discussed. Finally, we will discuss the reaction systems that have been developed with acridine complexes thus far, including the notable selective transformations of primary alcohols to primary amines using ammonia, N-heteroaromatic synthesis from alcohols and ammonia, oxidation reactions with water with H2 liberation, development of H2 carrier systems, and others, and conclude the article with future possible directions. We hope that the systemic study presented here will aid researchers in developing further sustainable reactions based on the unique acridine-based pincer complexes.

Hydrothermal water enabling one-pot transformation of amines to alcohols via supported Pd catalysts

The simple, direct conversion of amines to alcohols is quite rare and remains challenging. Here, with the unique catalytic role of hydrothermal water, two green and one-pot strategies were proposed...

Reframing primary alkyl amines as aliphatic building blocks

While primary aliphatic amines are ubiquitous in natural products, they are traditionally considered inert to substitution chemistry. This review highlights historical and recent advances in the field of aliphatic deamination chemistry which demonstrate these moieties can be harnessed as valuable C(sp3) synthons. Cross-coupling and photocatalyzed transformations proceeding through polar and radical mechanisms are compared with oxidative deamination and other transition metal catalyzed reactions.

Catalytic Oxidative Deamination by Water with H2 Liberation

Selective oxidative deamination has long been considered to be an important but challenging transformation, although it is a common critical process in the metabolism of bioactive amino compounds. Most of the synthetic methods developed so far rely on the use of stoichiometric amounts of strong and toxic oxidants. Here we present a green and efficient method for oxidative deamination, using water as the oxidant, catalyzed by a ruthenium pincer complex. This unprecedented reaction protocol liberates hydrogen gas and avoids the use of sacrificial oxidants. A wide variety of primary amines are selectively transformed to carboxylates or ketones in good to high yields. It is noteworthy that mechanistic experiments and DFT calculations indicate that in addition to serving as the oxidant, water also plays an important role in assisting the hydrogen liberation steps involved in amine dehydrogenation.

Highly Efficient Synthesis of Amino Acids by Amination of Bio-Derived Hydroxy Acids with Ammonia over Ru Supported on N-Doped Carbon Nanotubes

The amino acids have extensive applications, and their productions from biomass-derived feedstocks are very attractive. In this work, the synthesis of amino acids by amination of bio-derived hydroxy acids with ammonia over different metallic nano-catalysts supported on various supports is studied. It is found that Ru nano-catalysts on the nitrogen-doped carbon nanotubes (Ru/N-CNTs) have an outstanding performance for the reaction. Different hydroxy acids can be catalytically converted into the corresponding amino acids with yields up to 70.0 % under mild conditions, which is higher than those reported. The reasons for the high efficiency of the catalyst are investigated, and the reaction pathway is proposed on the basis of control experiments.

Ruthenium-Catalyzed Deaminative Hydrogenation of Amino Nitriles: Direct Access to 1,2-Amino Alcohols

A new approach for the efficient and highly selective synthesis of 1,2-amino alcohols by direct reductive hydrolysis of N-formyl-protected α-amino nitriles is reported. The commercially available RuHCl(CO)(PPh₃ )₃ complex was found to be a suitable catalyst for this operationally simple protocol, in which no stoichiometric amounts of undesired metal waste are generated. The deaminative hydrogenation is performed at 55 bar of H₂ , using a 6:1 mixture of 1,4-dioxane/water as solvent. In addition, hydroxymethyl alcohols were prepared from cyanoketones under very similar conditions.

Ru(ii)-p-cymene complexes containing esters of chiral d/l-phenylalanine derived aroylthiourea ligands for enantioselective reduction of pro-chiral ketones

The chiral Ru(ii)-p-cymene complexes are efficient catalysts for the enantioselective reduction of ketones to chiral alcohols.

Mechanistic investigations of the catalytic formation of lactams from amines and water with liberation of H2

The mechanism of the unique lactam formation from amines and water with concomitant H2 liberation with no added oxidant, catalyzed by a well-defined acridine-based ruthenium pincer complex was investigated in detail by both experiment and DFT calculations. The results show that a dearomatized form of the initial complex is the active catalyst. Furthermore, reversible imine formation was shown to be part of the catalytic cycle. Water is not only the oxygen atom source but also acts as a cocatalyst for the H2 liberation, enabled by conformational flexibility of the acridine-based pincer ligand.

Oxidant-free conversion of cyclic amines to lactams and H2 using water as the oxygen atom source

Direct conversion of cyclic amines to lactams utilizing water as the only reagent is catalyzed by pincer complex 2. In contrast to previously known methods of amine-to-amide conversion, this reaction occurs in the absence of oxidants and is accompanied by liberation of H2, with water serving as a source of oxygen atom. Formation of a cyclic hemiaminal intermediate plays a key role in enabling such reactivity. This represents an unprecedented, conceptually new type of amide formation reaction directly from amines and water under oxidant-free conditions.