Dynamic Molecular Recognition in Solid State for Separating Mixtures of Isomeric Dicarboxylic Acids

Ring-Opening Polymerization of ε-Caprolactone and Styrene Oxide-CO2 Coupling Reactions Catalyzed by Chelated Dehydroacetic Acid-Imine Aluminum Complexes

A series of chelated dehydroacetic acid-imine-based ligands L1H~L4H was synthesized by reacting dehydroacetic acid with 2-t-butylaniline, (S)-1-phenyl-ethylamine, 4-methoxylbenzylamine, and 2-(aminoethyl)pyridine, respectively, in moderate yields. Ligands L1H~L4H reacted with AlMe3 in toluene to afford corresponding compounds AlMe2L1 (1), AlMe2L2 (2), AlMe2L3 (3), and AlMe2L4 (4). All the ligands and aluminum compounds were characterized by IR spectra, 1H and 13C NMR spectroscopy. Additionally, the ligands L1H~L4H and corresponding aluminum derivatives 1, 3, and 4 were characterized by single-crystal X-ray diffractometry. The catalytic activities using these aluminum compounds as catalysts for the ε-caprolactone ring-opening polymerization (ROP) and styrene oxide-CO2 coupling reactions were studied. The results show that increases in the reaction temperature and selective solvent intensify the conversions of ε-caprolactone to polycaprolactone. Regarding the coupling reactions of styrene oxide and CO2, the conversion rate is over 90% for a period of 12 h at 90 °C. This strategy dispenses the origination of cyclic styrene carbonates, which is an appealing concern because of the transformation of CO2 into an inexpensive, renewable and easy excess carbon feedstock.

Waste-to-Energy: Production of Fuel Gases from Plastic Wastes

A new mechanochemical method was developed to convert polymer wastes, polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC), to fuel gases (H₂, CH₄, and CO) under ball-milling with KMnO₄ at room temperature. By using various solid-state characterizations (XPS, SEM, EDS, FTIR, and NMR), and density functional theory calculations, it was found that the activation followed the hydrogen atom transfer (HAT) mechanism. Two metal oxidant molecules were found to abstract two separate hydrogen atoms from the α-CH and β-CH units of substrates, [-_βCH₂-_αCH(R)-]_n, where R = H in PE, R = _γCH₃ in PP, and R = Cl in PVC, resulting in a di-radical, [-_βCH^•-_αC^•(R)-]. Subsequently, the two unpaired electrons of the di-radical were recombined into an alkene intermediate, [-_βCH = _αC(R)-], which underwent further oxidation to produce H₂, CH₄, and CO gases.

The affinity of copper(ii) ions towards l-amino acids in the solid-state: a simple route towards mixed complexes

Competitive milling was successfully employed to determine the relative affinity of Cu(ii) ions towards selected l-amino acids (Asn, Gln, His, Phe, Pro, and Trp). Described process opens a simple route towards mixed coordination compounds.

Acid-base properties of phosphoric and acetic acid in aprotic organic solvents - A complete thermodynamic characterisation

Knowledge regarding the acid-base behaviour in non-aqueous media has remained relatively scarce in spite of its importance for many aspects of chemistry. The research presented in this work fills some of particularly important gaps in the corresponding thermodynamic data. We report on a detailed study of acid-base properties of dihydrogen phosphate and acetate in aprotic organic solvents (acetonitrile, dimethyl sulfoxide, and dimethylformamide). It was found that several processes, i.e. protonation, homoassociation, and dimerisation play important roles in defining the basicity of these widely important anions. In the case of dihydrogen phosphate, formation of higher homoassociates (two anions, one acid molecule and vice versa) was detected, whereas acetate formed only simple homoassociates of 1:1 stoichiometry. The dimerisation of dihydrogen phosphate and acetic acid were confirmed to be important processes as well. The thermodynamics of the above mentioned reactions was characterised in detail by means of various experimental methods: ITC, spectrophotometry, NMR-spectroscopy, and conductometry. Reliable equilibrium constants and other thermodynamic reaction functions were determined. The obtained results were discussed in terms of hydrogen bonding potential of the anions and their conjugated acids, as well as solvent properties, i.e. their ability to solvate the species involved in the studied processes.

Cobalt, nickel and copper complexes with glycinamide: structural insights and magnetic properties

Ten new compounds of Co, Ni and Cu with glycinamide (HL = glycinamide): [Co(H₂O)₂(HL)₂]Cl₂ (1a), [Co(H₂O)₂(HL)₂]Br_1.06Cl_0.94 (1b), [Co(H₂O)₂(HL)₂]I₂ (1c), [Ni(H₂O)₂(HL)₂]Cl₂ (2a), [Ni(H₂O)₂(HL)₂]Br_0.94Cl_1.06 (2b), [Ni(H₂O)₂(HL)₂]I₂ (low and room temperature polymorph, 2c_LT and 2c_RT), [CuCl₂(HL)₂] (3a), [CuBr_1.3Cl_0.7(HL)₂] (3b) and {[Cu(HL)₂]₂[Cu₂I₆]}_n (3c), as well as glycinamide hydroiodide (H₂LI) and a new polymorph of glycinamide hydrochloride (β-H₂LCl) were prepared and characterized by single-crystal X-ray diffraction, infrared spectroscopy, thermal analysis (TG/DTA) and ESR spectroscopy. 1a, 1b, 2a and 2b are isostructural, as well as 1c and 2c_RT, while the Cu compounds (3a–c) have entirely different molecular structures. All investigated compounds are mononuclear with exception of the 1D coordination polymer 3c. Compound 3c contains copper ions in the mixed oxidation state Cu(i) and Cu(ii) with interesting magnetic properties. Paramagnetic behaviour was found in 1a, 1b, 3a and 3b. Temperature induced polymorphic transformation was observed in 2c. Compounds 1a and 3a showed moderate antiproliferative activity and selectivity toward the human breast tumor cell line MCF-7.

We report the crystal structures and magnetic properties of nine mononuclear complexes and one 1D coordination polymer containing Cu^II/Cu^I ions.

Selective Separation of Isomeric Dicarboxylic Acid by the Preferable Crystallization of Metal-Organic Frameworks

Simple and effective separation of isomeric organic molecules is an important but challenging task. Herein, we successfully developed a selective crystallization strategy to separate the mixtures of isomeric dicarboxylic acids (DCAs) for the first time. The target DCAs could be preferably combined with crystallization inducer of Zr⁴⁺ ions to form a pre-designed metal-organic frameworks (MOFs) crystal structure whereas the entry of non-target isomeric DACs into the MOFs lattice could be exclusively inhibited. Several isomeric pairs were exemplified to verify the extensibility and validity of the developed strategy.

Enthalpy vs. friction: heat flow modelling of unexpected temperature profiles in mechanochemistry of metal-organic frameworks

Mechanochemical reactions by ball milling are becoming increasingly popular across a wide range of chemical sciences, but understanding and evaluation of temperature during such processes remains a persistent challenge, especially for organic and metal-organic materials. Here, we describe the first methodology for precise real-time measurement of sample temperature during mechanochemical transformations. Using this technique coupled with real-time in situ reaction monitoring by synchrotron X-ray diffraction and numerical simulations of heat flow, we have shown that the temperature profiles of mechanochemical reactions are dominantly determined by the energy dissipated through friction between the sample and the moving milling assembly, while the reaction enthalpy will usually be comparatively insignificant. With the changes in composition during mechanochemical reactions, frictional properties of the milled material change, leading to either better or worse energy absorption upon collisions in the process of milling. This approach explains unexpected and rapid temperature drops during exothermic transformations of ZIF-8 polymorphs. Since reaction kinetics are highly sensitive to changes in temperature, precise temperature profiles provided here will be mandatory to understand kinetics and its changes during milling, and will aid in developing the comprehensive model of mechanochemical reactivity.

Towards medicinal mechanochemistry: evolution of milling from pharmaceutical solid form screening to the synthesis of active pharmaceutical ingredients (APIs)

This overview highlights the emergent area of mechanochemical reactions for making active pharmaceutical ingredients (APIs), and covers the latest advances in the recently established area of mechanochemical screening and synthesis of pharmaceutical solid forms, specifically polymorphs, cocrystals, salts and salt cocrystals. We also provide an overview of the most recent developments in pharmaceutical uses of mechanochemistry, including real-time reaction monitoring, techniques for polymorph control and approaches for continuous manufacture using twin screw extrusion, and more. Most importantly, we show how the overlap of previously unrelated areas of mechanochemical screening for API solid forms, organic synthesis by milling, and mechanochemical screening for molecular recognition, enables the emergence of a new research discipline in which different aspects of pharmaceutical and medicinal chemistry are addressed through mechanochemistry rather than through conventional solution-based routes. The emergence of such medicinal mechanochemistry is likely to have a strong impact on future pharmaceutical and medicinal chemistry, as it offers not only access to materials and reactivity that are sometimes difficult or even impossible to access from solution, but can also provide a general answer to the demands of the pharmaceutical industry for cleaner, safer and efficient synthetic solutions.

Dicarboxylic Acid Separation by Dynamic and Size-Matched Recognition in Solution and in the Solid State

Bis(trimethylammonium) alkane diiodides dynamically encapsulate dicarboxylic acids through intermolecular hydrogen bonds between the I^- anions of the hosts and the carboxylic OH groups of the guests. A selective recognition is realized when the size of the I^- ⋅⋅⋅HOOC(CH₂ /CF₂ )_n COOH⋅⋅⋅I^- superanion matches the dication alkyl chain length. Dynamic recognition is also demonstrated in solution, where the presence of the size-matching organic salt boosts the acid solubility profile, thus allowing efficient mixture separation.

Tandem In Situ Monitoring for Quantitative Assessment of Mechanochemical Reactions Involving Structurally Unknown Phases

We report herein quantitative in situ monitoring by simultaneous PXRD and Raman spectroscopy of the mechanochemical reaction between benzoic acid and nicotinamide, affording a rich polymorphic system with four new cocrystal polymorphs, multiple phase transformations, and a variety of reaction pathways. After observing polymorphs by in situ monitoring, we were able to isolate and characterize three of the four polymorphs, most of which are not accessible from solution. Relative stabilities among the isolated polymorphs at ambient conditions were established by slurry experiments. Using two complementary methods for in situ monitoring enabled quantitative assessment and kinetic analysis of each studied mechanochemical reaction, even when involving unknown crystal structures, and short-lived intermediates. In situ Raman monitoring was introduced here also as a standalone laboratory technique for quantitative assessment of mechanochemical reactions and understanding of mechanochemical reactivity. Our results provide an important step toward a complete and high-throughput quantitative approach to mechanochemical reaction kinetics and mechanisms, necessary for the development of the mechanistic framework of milling reactions.

Dehydroacetic Acid Derivatives Bearing Amide or Urea Moieties as Effective Anion Receptors

Derivatives of dehydroacetic acid comprising amide or urea subunits have been synthesized and their anion-binding properties investigated. Among a series of halides and oxyanions, the studied compounds selectively bind acetate and dihydrogen phosphate in acetonitrile and dimethyl sulfoxide. The corresponding complexation processes were characterized by means of ¹ H NMR titrations, which revealed a 1:1 complex stoichiometry in most cases, with the exception of dihydrogen phosphate, which formed 2:1 (anion/ligand) complexes in acetonitrile. The complex stability constants were determined and are discussed with respect to the structural properties of the receptors, the hydrogen-bond-forming potential of the anions, and the characteristics of the solvents used. Based on the spectroscopic data and results of Monte Carlo simulations, the amide or urea groups were affirmed as the primary binding sites in all cases. The results of the computational methods indicate that an array of both inter- and intramolecular hydrogen bonds can form in the studied systems, and these were shown to play an important role in defining the overall stability of the complexes. Solubility measurements were carried out in both solvents and the thermodynamics of transfer from acetonitrile to dimethyl sulfoxide were characterized on a quantitative level. This has afforded a detailed insight into the impact of the medium on the complexation reactions.

In Situ Monitoring of the Mechanosynthesis of the Archetypal Metal-Organic Framework HKUST-1: Effect of Liquid Additives on the Milling Reactivity

We have applied in situ monitoring of mechanochemical reactions by high-energy synchrotron powder X-ray diffraction to study the role of liquid additives on the mechanochemical synthesis of the archetypal metal-organic framework (MOF) HKUST-1, which was one of the first and is still among the most widely investigated MOF materials to be synthesized by solvent-free procedures. It is shown here how the kinetics and mechanisms of the mechanochemical synthesis of HKUST-1 can be influenced by milling conditions and additives, yielding on occasion two new and previously undetected intermediate phases containing a mononuclear copper core, and that finally rearrange to form the HKUST-1 architecture. On the basis of in situ data, we were able to tune and direct the milling reactions toward the formation of these intermediates, which were isolated and characterized by spectroscopic and structural means and their magnetic properties compared to those of HKUST-1. The results have shown that despite the relatively large breadth of analysis available for such widely investigated materials as HKUST-1, in situ monitoring of milling reactions can help in the detection and isolation of new materials and to establish efficient reaction conditions for the mechanochemical synthesis of porous MOFs.

Real-Time and In Situ Monitoring of Mechanochemical Reactions: A New Playground for All Chemists

We provide a brief overview of the first techniques for direct, real-time observation of mechanochemical reactions by milling. Whereas mechanisms and kinetics of solid-state reactions induced by temperature or pressure have been extensively investigated, transformations of materials under continuous impact in a milling assembly remain largely unexplored and based on ex situ studies. The recent introduction and development of techniques for in situ monitoring of milling reactions by synchrotron X-ray powder diffraction and Raman spectroscopy has enabled the first direct insight into milling mechanochemistry, opening a new area for studies of chemical reactivity. So far, these techniques have revealed rapid, multistep reaction mechanisms and metastable intermediates that are impossible or difficult to observe or isolate in solution and have highlighted shortcomings of ex situ mechanistic studies. These pioneering advances also highlight the low level of mechanistic understanding and future challenges in developing a clear mechanistic picture of physicochemical transformations by milling.

Quantitative in situ and real-time monitoring of mechanochemical reactions

An experimental technique for in situ and real-time monitoring of mechanochemical reactions in a shaker ball mill was recently described, which utilises highly penetrating X-ray radiation available at the ID15B beamline of the European Synchrotron Radiation Facility. Herein, we describe the first attempts to perform such reaction monitoring in a quantitative fashion, by introducing an internal X-ray diffraction standard. The use of silicon as an internal standard resolved the issue with variations of the amount of the sample in the X-ray beam due to the non-uniform distribution of the sample in the reaction jar and allowed, via Rietveld analysis, the first quantitative estimate of the amorphous phase content in a mechanochemical reaction as it is being milled. We also highlight problems associated with the non-ideal mixing of the reaction mixture.

Conformational adaptations of acyclic receptor templated by weakly coordinating anions

This work reports binding modes and adaptability of a versatile polyamine receptor (L) derived from dehydroacetic acid in complexes with spherical (Br⁻and I⁻), or multifaceted linear (SCN⁻) or pyramidal (ClO₃⁻) anions.

Mechanochemical reactions studied by in situ Raman spectroscopy: base catalysis in liquid-assisted grinding

Monitoring byin situRaman spectroscopy of a mechanochemical substitution reaction on a carbonyl group reveals base catalysis akin to catalysis in solution.

Selective fluorescence sensing of salicylic acids using a simple pyrenesulfonamide receptor

The highest change in relative intensity of probe 3 among the probes 2–5 with 3,5-DNSA demonstrated the significance of sulfonamide N–H and imidazole C2–H with the highest association constant and complete quenching.

In situ and real-time monitoring of mechanochemical milling reactions using synchrotron X-ray diffraction

We describe the only currently available protocol for in situ, real-time monitoring of mechanochemical reactions and intermediates by X-ray powder diffraction. Although mechanochemical reactions (inducing transformations by mechanical forces such as grinding and milling) are normally performed in commercially available milling assemblies, such equipment does not permit direct reaction monitoring. We now describe the design and in-house modification of milling equipment that allows the reaction jars of the operating mill to be placed in the path of a high-energy (∼90 keV) synchrotron X-ray beam while the reaction is taking place. Resulting data are analyzed using conventional software, such as TOPAS. Reaction intermediates and products are identified using the Cambridge Structural Database or Inorganic Crystal Structure Database. Reactions are analyzed by fitting the time-resolved diffractograms using structureless Pawley refinement for crystalline phases that are not fully structurally characterized (such as porous frameworks with disordered guests), or the Rietveld method for solids with fully determined crystal structures (metal oxides, coordination polymers).