Chemical Activity of Thin Oxide Layers: Strong Interactions with the Support Yield a New Thin-Film Phase of ZnO

Bimetallic CuPd nanoparticles supported on ZnO or graphene for CO2 and CO conversion to methane and methanol

Carbon dioxide (CO2) and carbon monoxide (CO) hydrogenation to methane (CH4) or methanol (MeOH) is a promising pathway to reduce CO2 emissions and to mitigate dependence on rapidly depleting fossil fuels. Along these lines, a series of catalysts comprising copper (Cu) or palladium (Pd) nanoparticles (NPs) supported on zinc oxide (ZnO) as well as bimetallic CuPd NPs supported on ZnO or graphene were synthesized via various methodologies. The prepared catalysts underwent comprehensive characterization via high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDX) mapping, electron energy loss spectroscopy (EELS), X-ray diffraction (XRD), hydrogen temperature-programmed reduction and desorption (H2-TPR and H2-TPD), and deuterium temperature-programmed desorption (D2O-TPD). In the CO2 hydrogenation process carried out at 20 bar and elevated temperatures (300 to 500 °C), Cu, Pd, and CuPd NPs (<5 wt% loading) supported on ZnO or graphene predominantly yielded CH4 as the primary product, with CO generated as a byproduct via the reverse water gas shift (RWGS) reaction. For CO hydrogenation between 400 and 500 °C, the CO conversion was at least 40% higher than the CO2 conversion, with CH4 and CO2 identified as the main products, the latter from water gas shift. Employing 90 wt% Cu on ZnO led to an enhanced CO conversion of 14%, with the MeOH yield reaching 10% and the CO2 yield reaching 4.3% at 230 °C. Overall, the results demonstrate that lower Cu/Pd loading (<5 wt%) supported on ZnO/graphene favored CH4 production, while higher Cu content (90 wt%) promoted MeOH production, for both CO2 and CO hydrogenation at high pressure.

Visualizing the gas-sensitive structure of the CuZn surface in methanol synthesis catalysis

Methanol formation over Cu/ZnO catalysts is linked with a catalytically active phase created by contact between Cu nanoparticles and Zn species whose chemical and structural state depends on reaction conditions. Herein, we use variable-temperature scanning tunneling microscopy at elevated pressure conditions combined with X-ray photoelectron spectroscopy measurements to investigate the surface structures and chemical states that evolve when a CuZn/Cu(111) surface alloy is exposed to reaction gas mixtures. In CO2 hydrogenation conditions, Zn stays embedded in the CuZn surface, but once CO gas is added to the mixture, the Zn segregates onto the Cu surface. The Zn segregation is CO-induced, and establishes a new dynamic state of the catalyst surface where Zn is continually exchanged at the Cu surface. Candidates for the migrating few-atom Zn clusters are further identified in time-resolved imaging series. The findings point to a significant role of CO affecting the distribution of Zn in the multiphasic ZnO/CuZn/Cu catalysts.

The Enigma of Methanol Synthesis by Cu/ZnO/Al2O3-Based Catalysts

The activity and durability of the Cu/ZnO/Al2O3 (CZA) catalyst formulation for methanol synthesis from CO/CO2/H2 feeds far exceed the sum of its individual components. As such, this ternary catalytic system is a prime example of synergy in catalysis, one that has been employed for the large scale commercial production of methanol since its inception in the mid 1960s with precious little alteration to its original formulation. Methanol is a key building block of the chemical industry. It is also an attractive energy storage molecule, which can also be produced from CO2 and H2 alone, making efficient use of sequestered CO2. As such, this somewhat unusual catalyst formulation has an enormous role to play in the modern chemical industry and the world of global economics, to which the correspondingly voluminous and ongoing research, which began in the 1920s, attests. Yet, despite this commercial success, and while research aimed at understanding how this formulation functions has continued throughout the decades, a comprehensive and universally agreed upon understanding of how this material achieves what it does has yet to be realized. After nigh on a century of research into CZA catalysts, the purpose of this Review is to appraise what has been achieved to date, and to show how, and how far, the field has evolved. To do so, this Review evaluates the research regarding this catalyst formulation in a chronological order and critically assesses the validity and novelty of various hypotheses and claims that have been made over the years. Ultimately, the Review attempts to derive a holistic summary of what the current body of literature tells us about the fundamental sources of the synergies at work within the CZA catalyst and, from this, suggest ways in which the field may yet be further advanced.

Enhanced Methanol Synthesis from CO2 Hydrogenation Achieved by Tuning the Cu-ZnO Interaction in ZnO/Cu2O Nanocube Catalysts Supported on ZrO2 and SiO2

The nature of the Cu-Zn interaction and especially the role of Zn in Cu/ZnO catalysts used for methanol synthesis from CO2 hydrogenation are still debated. Migration of Zn onto the Cu surface during reaction results in a Cu-ZnO interface, which is crucial for the catalytic activity. However, whether a Cu-Zn alloy or a Cu-ZnO structure is formed and the transformation of this interface under working conditions demand further investigation. Here, ZnO/Cu2O core-shell cubic nanoparticles with various ZnO shell thicknesses, supported on SiO2 or ZrO2 were prepared to create an intimate contact between Cu and ZnO. The evolution of the catalyst's structure and composition during and after the CO2 hydrogenation reaction were investigated by means of operando spectroscopy, diffraction, and ex situ microscopy methods. The Zn loading has a direct effect on the oxidation state of Zn, which, in turn, affects the catalytic performance. High Zn loadings, resulting in a stable ZnO catalyst shell, lead to increased methanol production when compared to Zn-free particles. Low Zn loadings, in contrast, leading to the presence of metallic Zn species during reaction, showed no significant improvement over the bare Cu particles. Therefore, our work highlights that there is a minimum content of Zn (or optimum ZnO shell thickness) needed to activate the Cu catalyst. Furthermore, in order to minimize catalyst deactivation, the Zn species must be present as ZnOx and not metallic Zn or Cu-Zn alloy, which is undesirably formed during the reaction when the precatalyst ZnO overlayer is too thin.

Theoretical prediction of the electronic structure, optical properties and photocatalytic performance of type-I SiS/GeC and type-II SiS/ZnO heterostructures

Nowadays, it would be ideal to develop high-performance photovoltaic devices as well as highly efficient photocatalysts for the production of hydrogen via photocatalytic water splitting, which is a feasible and sustainable energy source for addressing the challenges related to environmental pollution and a shortage of energy. In this work, we employ first-principles calculations to investigate the electronic structure, optical properties and photocatalytic performance of novel SiS/GeC and SiS/ZnO heterostructures. Our results indicate that both the SiS/GeC and SiS/ZnO heterostructures are structurally and thermodynamically stable at room temperature, suggesting that they are promising materials for experimental implementation. The formation of SiS/GeC and SiS/ZnO heterostructures gives rise to reduction of the band gaps as compared to the constituent monolayers, enhancing the optical absorption. Furthermore, the SiS/GeC heterostructure possesses a type-I straddling gap with a direct band gap, while the SiS/ZnO heterostructure forms a type-II band alignment with indirect band gap. Moreover, a red-shift (blue-shift) has been observed in SiS/GeC (SiS/ZnO) heterostructures as compared with the constituent monolayers, enhancing the efficient separation of photogenerated electron-hole pairs, thereby making them promising candidates for optoelectronic applications and solar energy conversion. More interestingly, significant charge transfers at the interfaces of SiS-ZnO heterostructures, have improved the adsorption of H, and the Gibbs free energy Δ_H* becomes close to zero, which is optimal for the hydrogen evolution reaction to produce hydrogen. The findings pave the path for the practical realization of these heterostructures for potential applications in photovoltaics and photocatalysis of water splitting.

Catalytic Hydrogenation of CO2 to Methanol: A Review

High-efficiency utilization of CO2 facilitates the reduction of CO2 concentration in the global atmosphere and hence the alleviation of the greenhouse effect. The catalytic hydrogenation of CO2 to produce value-added chemicals exhibits attractive prospects by potentially building energy recycling loops. Particularly, methanol is one of the practically important objective products, and the catalytic hydrogenation of CO2 to synthesize methanol has been extensively studied. In this review, we focus on some basic concepts on CO2 activation, the recent research advances in the catalytic hydrogenation of CO2 to methanol, the development of high-performance catalysts, and microscopic insight into the reaction mechanisms. Finally, some thinking on the present research and possible future trend is presented.

Chemical Batteries with CO2

Efforts to obtain raw materials from CO2 by catalytic reduction as a means of combating greenhouse gas emissions are pushing the boundaries of the chemical industry. The dimensions of modern energy regimes, on the one hand, and the necessary transport and trade of globally produced renewable energy, on the other, will require the use of chemical batteries in conjunction with the local production of renewable electricity. The synthesis of methanol is an important option for chemical batteries and will, for that reason, be described here in detail. It is also shown that the necessary, robust, and fundamental understanding of processes and the material science of catalysts for the hydrogenation of CO2 does not yet exist.

Copper–zinc oxide interface as a methanol-selective structure in Cu–ZnO catalyst during catalytic hydrogenation of carbon dioxide to methanol

The proper contact of zinc oxide and copper phases is essential achieving high activity/selectivity toward methanol in the Cu–ZnO system.

Atomic origins of the strong metal-support interaction in silica supported catalysts

Silica supported metal catalysts are most widely used in the modern chemical industry because of the high stability and tunable reactivity. The strong metal–support interaction (SMSI), which has been widely observed in metal oxide supported catalysts and significantly affects the catalytic behavior, has been speculated to rarely happen in silica supported catalysts since silica is hard to reduce. Here we revealed at the atomic scale the interfacial reaction induced SMSI in silica supported Co and Pt catalysts under reductive conditions at high temperature using aberration-corrected environmental transmission electron microscopy coupled with in situ electron energy loss spectroscopy. In a Co/SiO₂ system, the amorphous SiO₂ migrated onto the Co surface to form a crystallized quartz-SiO₂ overlayer, and simultaneously an interlayer of Si was generated in-between. The metastable crystalline SiO₂ overlayer subsequently underwent an order-to-disorder transition due to the continuous dissociation of SiO₂ and the interfacial alloying of Si with the underlying Co. The SMSI in the Pt–SiO₂ system was found to remarkably boost the catalytic hydrogenation. These findings demonstrate the universality of the SMSI in oxide supported catalysts, which is of general importance for designing catalysts and understanding catalytic mechanisms.

This work tracked at the atomic scale the interfacial reaction induced strong metal–support interaction between SiO₂ and metal catalysts and evolution under reactive conditions by aberration-corrected environmental transmission electron microscopy.

Structural Evolution of Cu/ZnO Catalysts during Water-Gas Shift Reaction: An In Situ Transmission Electron Microscopy Study

Supported metal catalysts experience significant structural evolution during the activation process and reaction conditions, which is critical to achieve a desired active surface and interface enabling efficient catalytic processes. However, such dynamic structural information and related mechanistic understandings remain largely elusive owing to the limitation of real-time capturing dynamic information under reaction conditions. Here, using in situ environment transmission electron microscopy, we demonstrate the atomic-scale structural evolution of the model Cu/ZnO catalyst under relevant water-gas shift reaction (WGSR) conditions. Under a CO gas environment, Cu nanoparticles decompose into smaller Cu species and redistribute on ZnO supports with either the crystalline Cu₂O or amorphous CuO_x phase due to a strong CO-Cu interaction. In addition, we visualize various metal-support interactions between Cu and ZnO under reaction conditions, e.g., ZnO clusters precipitating on Cu nanoparticles, which are critical to understand active sites of Cu/ZnO as catalysts for WGSR. These in situ atomic-scale observations highlight the dynamic interplays between Cu and ZnO that can be extended to other supported metal catalysts.

Structural and Chemical Transformations of Zinc Oxide Ultrathin Films on Pd(111) Surfaces

Structural and chemical transformations of ultrathin oxide films on transition metals lie at the heart of many complex phenomena in heterogeneous catalysis, such as the strong metal-support interaction (SMSI). However, there is limited atomic-scale understanding of these transformations, especially for irreducible oxides such as ZnO. Here, by combining density functional theory calculations and surface science techniques, including scanning tunneling microscopy, X-ray photoelectron spectroscopy, high-resolution electron energy loss spectroscopy, and low-energy electron diffraction, we investigated the interfacial interaction of well-defined ultrathin ZnO_xH_y films on Pd(111) under varying gas-phase conditions [ultrahigh vacuum (UHV), 5 × 10^-7 mbar of O₂, and a D₂/O₂ mixture] to shed light on the SMSI effect of irreducible oxides. Sequential treatment of submonolayer zinc oxide films in a D₂/O₂ mixture (1:4) at 550 K evoked reversible structural transformations from a bilayer to a monolayer and further to a Pd-Zn near-surface alloy, demonstrating that zinc oxide, as an irreducible oxide, can spread on metal surfaces and show an SMSI-like behavior in the presence of hydrogen. A mixed canonical-grand canonical phase diagram was developed to bridge the gap between UHV conditions and true SMSI environments, revealing that, in addition to surface alloy formation, certain ZnO_xH_y films with stoichiometries that do not exist in bulk are stabilized by Pd in the presence of hydrogen. Based on the combined theoretical and experimental observations, we propose that SMSI metal nanoparticle encapsulation for irreducible oxide supports such as ZnO involves both surface (hydroxy)oxide and surface alloy formation, depending on the environmental conditions.

From Chain- to Graphene-like Hydroxyl-terminated (ZnO)n Clusters with n≤6 Obtained via Zinc Dimethoxide Hydrolysis and Condensation: Ab initio Structural, Electronic, Vibrational and Optical Properties Calculations

Recent reports are focusing on the structural evolution from the atomic-scale and also at the expenses of alkyl zinc alkoxide precursors towards (ZnO)_n clusters and nanostructures with different interesting motifs, but still not much is known about their electronic properties. In this manuscript, we present a theoretical study using DFT and TD-DFT methodologies on the hydrolysis and condensation of zinc dimethoxide precursor in its monomeric, dimeric and trimeric forms towards thermodynamically stable hydroxyl-terminated (ZnO)_n clusters with novel chain- and graphene-like fashions. For all cases, distinct vibrational and optical spectra features were assigned evidencing a global monotonic decrease in the opto-electronic gap with increasing oligomerization and cyclization stages. In addition, the electron-affinity of all clusters was also observed to be enhanced with increasing oligomerization and cyclization stages and the electronic charge localization in -e charged clusters was observed to be strongly related to the presence of zinc-oxo subunits and other particular structural features. Our calculations also indicate that the stabilization through hydroxyl termination of both chain- and graphene-like ZnO clusters not only could be a promising driving force to obtain larger atomic-scale 1D and 2D nanostructures but also envisage interesting properties, particularly as electronic acceptor materials for energy applications.

Zeolite-Encapsulated Ultrasmall Cu/ZnOx Nanoparticles for the Hydrogenation of CO2 to Methanol

Selective hydrogenation of CO₂ to methanol is a "two birds, one stone" technology to mitigate the greenhouse effect and solve the energy demand-supply deficit. Cu-based catalysts can effectively catalyze this reaction but suffer from low catalytic stability caused by the sintering of Cu species. Here, we report a series of zeolite-fixed catalysts Cu/ZnO_x(Y)@Na-ZSM-5 (Y is the mass ratios of Cu/Zn in the catalysts) with core-shell structures to overcome this issue and strengthen the transformation. Fascinatingly, in this work, we first employed bimetallic metal-organic framework, CuZn-HKUST-1, nanoparticles (NPs) as a sacrificial agent to introduce ultrasmall Cu/ZnO_x NPs (∼2 nm) into the crystalline particles of the Na-ZSM-5 zeolite via a hydrothermal synthesis method. The catalytic results showed that the optimized zeolite-encapsulated Cu/ZnO_x(1.38)@Na-ZSM-5 catalyst exhibited the space time yield of methanol (STY_MeOH) of 44.88 g_MeOH·g_Cu^-1·h^-1, much more efficient than the supported Cu/ZnO_x/Na-ZSM-5 catalyst (13.32 g_MeOH·g_Cu^-1·h^-1) and industrial Cu/ZnO/Al₂O₃ catalyst (8.46 g_MeOH·g_Cu^-1·h^-1) under identical conditions. Multiple studies demonstrated that the confinement in the zeolite formwork affords an intimate surrounding for the active phase to create synergies and avoid the separation of Cu-ZnO_x interfaces, which results in an improved performance. More importantly, in the long-term test, the Cu/ZnO_x(1.38)@Na-ZSM-5 catalyst exhibited constant STY_MeOH with superior durability benefitted from its fixed structure. The current findings demonstrate the importance of confinement effects in designing highly efficient and stable methanol synthesis catalysts.

Operando high-pressure investigation of size-controlled CuZn catalysts for the methanol synthesis reaction

Although Cu/ZnO-based catalysts have been long used for the hydrogenation of CO₂ to methanol, open questions still remain regarding the role and the dynamic nature of the active sites formed at the metal-oxide interface. Here, we apply high-pressure operando spectroscopy methods to well-defined Cu and Cu_0.7Zn_0.3 nanoparticles supported on ZnO/Al₂O₃, γ-Al₂O₃ and SiO₂ to correlate their structure, composition and catalytic performance. We obtain similar activity and methanol selectivity for Cu/ZnO/Al₂O₃ and CuZn/SiO₂, but the methanol yield decreases with time on stream for the latter sample. Operando X-ray absorption spectroscopy data reveal the formation of reduced Zn species coexisting with ZnO on CuZn/SiO₂. Near-ambient pressure X-ray photoelectron spectroscopy shows Zn surface segregation and the formation of a ZnO-rich shell on CuZn/SiO₂. In this work we demonstrate the beneficial effect of Zn, even in diluted form, and highlight the influence of the oxide support and the Cu-Zn interface in the reactivity.

Type-I band alignment of BX-ZnO (X = As, P) van der Waals heterostructures as high-efficiency water splitting photocatalysts: a first-principles study

In this work, we perform first-principles calculations to examine the electronic, optical and photocatalytic properties of the BX–ZnO (X = As, P) heterostructures. The interlayer distance and binding energy of the most energetically favorable stacking configuration are 3.31 Å and −0.30 eV for the BAs–ZnO heterostructure and 3.30 Å and −0.25 eV for the BP–ZnO heterostructure. All the stacking patterns of the BX–ZnO heterostructures are proved to have thermal stability by performing AIMD simulations. The BAs–ZnO and BP–ZnO heterostructures are semiconductors with direct band gaps of 1.43 eV and 2.35 eV, respectively, and they exhibit type-I band alignment, which make them suitable for light emission applications with the ultra-fast recombination between electrons and holes. Both the BAs–ZnO and BP–ZnO heterostructures can exhibit a wider optical absorption range for visible-light owing to their reduced band gaps compared with the isolated BAs, BP and ZnO monolayers. The band alignment of both the BAs–ZnO and BP–ZnO heterostructures can straddle the water redox potential and they would have better performances owing to the direct band gap and the reduced band gap. All these findings demonstrate that the BX–ZnO heterostructures can be considered as potential photocatalysts for water splitting.

In this work, we perform first-principles calculations to examine the electronic, optical and photocatalytic properties of the BX–ZnO (X = As, P) heterostructures.

Chemical Reactivity of Supported ZnO Clusters: Undercoordinated Zinc and Oxygen Atoms as Active Sites

The growth of ZnO clusters supported by ZnO-bilayers on Ag(111) and the interaction of these oxide nanostructures with water have been studied by a multi-technique approach combining temperature-dependent infrared reflection absorption spectroscopy (IRRAS), grazing-emission X-ray photoelectron spectroscopy, and density functional theory calculations. Our results reveal that the ZnO bilayers exhibiting graphite-like structure are chemically inactive for water dissociation, whereas small ZnO clusters formed on top of these well-defined, yet chemically passive supports show extremely high reactivity - water is dissociated without an apparent activation barrier. Systematic isotopic substitution experiments using H2 16 O/D2 16 O/D2 18 O allow identification of various types of acidic hydroxyl groups. We demonstrate that a reliable characterization of these OH-species is possible via co-adsorption of CO, which leads to a red shift of the OD frequency due to the weak interaction via hydrogen bonding. The theoretical results provide atomic-level insight into the surface structure and chemical activity of the supported ZnO clusters and allow identification of the presence of under-coordinated Zn and O atoms at the edges and corners of the ZnO clusters as the active sites for H2 O dissociation.

Hydrogen Impurities in ZnO: Shallow Donors in ZnO Semiconductors and Active Sites for Hydrogenation of Carbon Species

ZnO, as a low-cost yet significant semiconductor, has been widely used in solar energy conversion and optoelectronic devices. In addition, Cu/ZnO-based catalysts can convert syngas (H₂, CO, and CO₂) into methanol. However, the main concern about the intrinsic connection between the physical and chemical properties and the structure of ZnO still remains. In this work, efforts are made to decipher the physical and chemical information encoded into the structure. Through using NMR-IR techniques, we, for the first time, report a new ZnO model with three H⁺ cations incorporated into one Zn vacancy. ¹H magic-angle spinning NMR and IR spectra demonstrate that Ga³⁺ cations are introduced into the Zn vacancies of the ZnO lattice, which replace the H⁺ cation, and thus further confirm the feasibility of our proposed model. The exchange between the H⁺ cation in Zn vacancies and the D₂ gas phase shows that ZnO can activate H₂ because of the quantized three H⁺ cations in the defect site.

Tunable electronic properties of the novel g-ZnO/1T-TiS2 vdW heterostructure by electric field and strain: crossovers in bandgap and band alignment types

A relatively new and promising method to tune properties of monolayers is by forming a heterostructure of them. Here, the van der Waals heterostructure of graphene-like zinc oxide (g-ZnO) and 1-trigonal titanium disulfide (1T-TiS2) was formed and its structural, electronic, and optical properties were studied in the framework of density functional theory. The dynamical stability of the heterostructure was confirmed based on its phonon band structure. An indirect (Γ → M) bandgap of 0.65 eV, a large built-in electric field (or a large potential drop of 3.12 eV), a type-II (staggered) band alignment, and a large conduction band offset of 2.94 eV were found to form across the interface, which are all desirable for potentially efficient separation of charge carriers. We showed also that the formation of the heterostructure largely enhances the almost-zero optical absorption of g-ZnO in visible and near-infrared regions, which is desirable for optoelectronic applications. By applying a perpendicular electric field, we could tune the bandgap value and the band alignment type (type-II → type-I) of the heterostructure. Finally, we showed that by applying compressive strain, one can change the band alignment type (type-II → type-I) and by applying tensile strain, the bandgap value could be tuned and a crossover occurs in the bandgap type (indirect → direct → indirect).

Effects of electric field and strain engineering on the electronic properties, band alignment and enhanced optical properties of ZnO/Janus ZrSSe heterostructures

The formation of van der Waals heterostructures (vdWHs) have recently emerged as promising structures to make a variety of novel nanoelectronic and optoelectronic devices. Here, in this work, we investigate the structural, electronic and optical features of ZnO/ZrSSe vdWHs for different stacking patterns of ZnO/SeZrS and ZnO/SZrSe by employing first-principles calculations. Binding energy and ab initio molecular dynamics calculations are also employed to confirm the structural and thermal stability of the ZnO/ZrSSe vdWHs for both models. We find that in both stacking models, the ZnO and ZrSSe layers are bonded via weak vdW forces, leading to easy exfoliation of the layers. More interestingly, both the ZnO/SeZrS and ZnO/SZrSe vdWHs posses type-II band alignment, making them promising candidates for the use of photovoltaic devices because the photogenerated electrons–holes are separated at the interface. The ZnO/ZrSSe vdWHs for both models possess high performance absorption in the visible and near-infrared regions, revealing their use for acquiring efficient photocatalysts. Moreover, the band gap values and band alignments of the ZnO/ZrSSe for both models can be adjusted by an electric field as well as vertical strains. There is a transformation from semiconductor to metal under a negative electric field and tensile vertical strain. These findings demonstrate that ZnO/ZrSSe vdWHs are a promising option for optoelectronic and nanoelectronic applications.

Here, in this work, we investigate the structural, electronic and optical features of ZnO/ZrSSe vdWHs for different stacking patterns of ZnO/SeZrS and ZnO/SZrSe by employing first-principles calculations.

State of the art and perspectives in heterogeneous catalysis of CO2 hydrogenation to methanol

The ever-increasing amount of anthropogenic carbon dioxide (CO₂) emissions has resulted in great environmental impacts, the heterogeneous catalysis of CO₂ hydrogenation to methanol is of great significance.

Industrial carbon dioxide capture and utilization: state of the art and future challenges

This review covers the sustainable development of advanced improvements in CO₂ capture and utilization.

Moving Frontiers in Transition Metal Catalysis: Synthesis, Characterization and Modeling

Nanosized transition metal particles are important materials in catalysis with a key role not only in academic research but also in many processes with industrial and societal relevance. Although small improvements in catalytic properties can lead to significant economic and environmental impacts, it is only now that knowledge-based design of such materials is emerging, partly because the understanding of catalytic mechanisms on nanoparticle surfaces is increasingly improving. A knowledge-based design requires bottom-up synthesis of well-defined model catalysts, an understanding of the catalytic nanomaterials "at work" (operando), and both a detailed understanding and a prediction by theoretical methods. This article reports on progress in colloidal synthesis of transition metal nanoparticles for preparation of model catalysts to close the materials gap between the discoveries of fundamental surface science and industrial application. The transition metal particles, however, often undergo extensive transformations when applied to the catalytic process and much progress has recently been achieved operando characterization techniques under relevant reaction conditions. They allow better understanding of size/structure-activity correlations in these systems. Moreover, the growth of computing power and the improvement of theoretical methods uncover mechanisms on nanoparticles and have recently predicted highly active particles for CO/CO₂ hydrogenation or direct H₂ O₂ synthesis.

Cu@ZIF-8 derived inverse ZnO/Cu catalyst with sub-5 nm ZnO for efficient CO2 hydrogenation to methanol

Cu@ZIF-8 derived inverse ZnO/Cu with sub-5 nm ZnO acts as an efficient catalyst for CO₂ hydrogenation to methanol.

Direct growth of ZnO crystals on various Cu substrates by Cu-catalyzed chemical bath deposition

By the catalytic action of Cu on DMAB, ZnO crystals grow directly on various Cu substrates immersed in an aqueous solution containing zinc nitrate and dimethylamine borane at 80 °C under an ambient atmosphere.