Crystal Facet Controlled Metal-Support Interaction in Uricase Mimics for Highly Efficient Hyperuricemia Treatment

The effect of strong metal-support interaction (SMSI) has never been systematically studied in the field of nanozyme-based catalysis before. Herein, by coupling two different Pd crystal facets with MnO2, i.e., (100) by Pd cube (Pdc) and (111) by Pd icosahedron (Pdi), we observed the reconstruction of Pd atomic structure within the Pd-MnO2 interface, with the reconstructed Pdc (100) facet more disordered than Pdi (111), verifying the existence of SMSI in such coupled system. The rearranged Pd atoms in the interface resulted in enhanced uricase-like catalytic activity, with Pdc@MnO2 demonstrating the best catalytic performance. Theoretical calculations suggested that a more disordered Pd interface led to stronger interactions with intermediates during the uricolytic process. In vitro cell experiments and in vivo therapy results demonstrated excellent biocompatibility, therapeutic effect, and biosafety for their potential hyperuricemia treatment. Our work provides a brand-new perspective for the design of highly efficient uricase-mimic catalysts.

Environmental TEM Study of the Dispersion of Au/α-MoC: From Nanoparticles to Two-Dimensional Clusters

The synthesis of highly dispersed Au nanoclusters that are stable under elevated temperatures in heterogeneous catalysis is challenging. Here, we directly observe a strong metal-support interaction (SMSI)-induced dispersion of Au nanoparticles (NPs) on α-MoC using an environmentally atomically resolved secondary imaging technique. Under a realistic environment, Au NPs flatten and spread out on the α-MoC to form two-dimensional atomic layered clusters. The formed highly dispersed Au/α-MoC catalyst shows excellent stability at 600 °C for 160 h in the reverse water-gas shift reaction. The X-ray photoelectron spectrum and extended X-ray absorption fine structure results show that Au NPs gradually become low-coordination-number cluster species and lose electrons to become Auδ+; these form chemical bonds with the α-MoC support and are responsible for the dispersion behavior. This work provides an insightful understanding of dispersion behavior and promotes the rational design and synthesis of reverse sintering catalysts.

Gold/Substituted Hydroxyapatites for Oxidative Esterification: Control of Thin Apatite Layer on Gold Based on Strong Metal-Support Interaction (SMSI) Results in High Activity

Gold nanoparticles (Au NPs) deposited on various cation- and anion-substituted hydroxyapatites (Au/sHAPs) show oxidative strong metal-support interaction (SMSI), wherein a thin layer of the sHAP covered the surface of the Au NPs by heat treatment in an oxidative atmosphere. Calcination of Au/sHAPs at 300 °C caused a partial SMSI and that at 500 °C gave fully encapsulated Au NPs. We investigated the influence of the substituted ions in sHAP and the degree of the oxidative SMSI on the catalytic performance of Au/sHAPs for oxidative esterification of octanal or 1-octanol with ethanol to obtain ethyl octanoate. The catalytic activity depends on the size of the Au NPs but not on the support used, owing to the similarity of the acid and base properties of sHAPs except for Au/CaFAP. The presence of a large number of acidic sites on CaFAP lowered the product selectivity, but all other sHAPs exhibited similar activity when the Au particle size was almost the same, owing to the similarity of the acid and base properties. Au/sHAPs_O₂ with SMSI exhibited higher catalytic activity than Au/sHAPs_H₂ without SMSI despite the fact that the number of exposed surface Au atoms was decreased by the SMSI. In addition, the oxidative esterification reaction proceeded even though the Au NPs were fully covered by the sHAP layer when the thickness of the layer was controlled to be less than 1 nm. The substrate can access the surfaces of the Au NPs covered by the thin sHAP layer (<1 nm), and the presence of the sHAP structure in close contact with the Au NPs resulted in significantly higher catalytic activity compared with that for fully exposed Au NPs deposited on the sHAPs. This result suggests that maximizing the contact area between the Au NPs and the sHAP support based on the SMSI enhances the catalytic activity of Au.

One-Step Synthesis of a High Entropy Oxide-Supported Rhodium Catalyst for Highly Selective CO Production in CO2 Hydrogenation

High entropy oxide (HEO) has shown to be a new type of catalyst support with tunable composition-function properties for many chemical reactions. However, the preparation of a metal nanoparticle catalyst supported on a metal oxide support is time-consuming and takes multiple complicated steps. Herein, we used a one-step glycine-nitrate-based combustion method to synthesize highly dispersed rhodium nanoparticles on a high surface area HEO. This catalyst showed high selectivity to produce CO in CO₂ hydrogenation with 80% higher activity compared to rhodium nanoparticle-based catalysts. We also studied the effect of different metal elements in HEO and demonstrated that high CO selectivity was achieved if one of the metals in the metal oxide support favored CO production. We identified that copper and zinc were responsible for the observed high CO selectivity due to their low *CO binding strength. During hydrogenation, a strong metal-support interaction was created through charge transfer and formed an encapsulated structure between rhodium nanoparticles and the HEO support to lower the *CO binding strength, which enabled high CO selectivity in the reaction. By combining different metal oxides into HEO as a catalyst support, high activity and high selectivity can be achieved at the same time in the CO₂ hydrogenation reaction.

Thermal-Driven Optimization of the Strong Metal-Support Interaction of a Platinum-Manganese Oxide Octahedral Molecular Sieve to Promote Toluene Oxidation: Effect of the Interface Pt2+-Ov-Mnδ. ACS Appl Mater Interfaces 2022;14:56790-56800. [PMID: 36524882 DOI: 10.1021/acsami.2c16923] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Strong metal-support interactions (SMSIs) have a significant effect on the performance of supported noble-metal catalysts for volatile organic compound (VOC) elimination. Herein, the strength of the SMSI of Pt/OMS-2 between Pt and the OMS-2 support is regulated by simply changing calcination temperatures, and the catalyst calcined at 300 °C (Pt/OMS-2-300) performs the best in the catalytic combustion of toluene. Through systematic structural characterizations, it is revealed that much more Pt²⁺-O_v-Mn^δ+ species are formed in Pt/OMS-2-300, which can help facilitate the generation of more reactive oxygen species and promote lattice oxygen mobility. Moreover, the results of in situ DRIFTS experiments further confirm that abundant Pt²⁺-O_v-Mn^δ+ species at the Pt-MnO₂ interface on Pt/OMS-2-300 can better enhance the adsorption and activation of toluene, thus boosting the catalytic performance in toluene combustion. This newly developed strategy of thermal-driven regulation of the SMSI provides a novel perspective for constructing highly efficient catalysts for VOC emission control.

Metal-Metal Oxide Catalytic Interface Formation and Structural Evolution: A Discovery of Strong Metal-Support Bonding, Ordered Intermetallics, and Single Atoms

In-depth investigation of metal-metal oxide interactions and their corresponding evolution is of paramount importance to heterogeneous catalysis as it allows the understanding and maneuvering of the structure of catalytic motifs. Herein, using a series of core/shell metal/iron oxide (M/FeO_x, M = Pd, Pt, Au) nanoparticles and through a combination of in situ and ex situ electron and X-ray investigations, we revealed anomalous and dissimilar M-FeO_x interactions among different systems under reducing conditions. Pd interacts strongly with FeO_x after high-temperature reductive treatment, featured by the formation of Pd single atoms in the FeO_x matrix and increased Pd-Fe bonding, while Pt transforms into ordered PtFe intermetallics and Pt single atoms immediately upon the coating of FeO_x. In contrast, Au does not manifest strong bonding with FeO_x. As a proof of concept of tailoring metal-metal oxide interactions for catalysis, optimized Pd/FeO_x demonstrates 100% conversion and 86.5% selectivity at 60 °C for acetylene semihydrogenation.

Gas-Permeable Iron-Doped Ceria Shell on Rh Nanoparticles with High Activity and Durability

Strong metal-support interaction (SMSI) is a promising strategy to control the structure of the supported metal catalyst. Especially, encapsulating metal nanoparticles through SMSI can enhance resistance against sintering but typically blocks the access of reactants onto the metal surface. Here, we report gas-permeable shells formed on Rh nanoparticles with enhanced activity and durability for the surface reaction. First, Fe species were doped into ceria, enhancing the transfer of surface oxygen species. When Rh was deposited onto the Fe-doped ceria (FC) and reduced, a shell was formed on Rh nanoparticles. Diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) results show that the shell is formed upon reduction and removed upon oxidation reversibly. CO adsorption on the Rh surface through the shell was confirmed by cryo-DRIFTS. The reverse water gas shift (RWGS) reaction (CO₂ + H₂ → CO + H₂O) occurred on the encapsulated Rh nanoparticles effectively with selective CO formation, whereas bare Rh nanoparticles deposited on ceria produced methane as well. The CO adsorption became much weaker on the encapsulated Rh nanoparticles, and H₂-spillover occurred more on the FC, resulting in high activity for RWGS. The exposed Rh nanoparticles deposited on ceria presented degradation at 400 °C after 150 h of RWGS, whereas the encapsulated Rh nanoparticles showed no degradation with superior durability. Enhancing surface oxygen transfer can be an efficient way to form gas-permeable overlayers on metal nanoparticles with high activity and durability.

Harnessing Strong Metal-Support Interaction to Proliferate the Dry Reforming of Methane Performance by In Situ Reduction

The strong bonding at the interface between the metal and the support, which can inhibit the undesirable aggregation of metal nanoparticles and carbon deposition from reforming of hydrocarbon, is well known as the classical strong metal-support interaction (SMSI). SMSI of nanocatalysts was significantly affected by heat treatment and reducing conditions during catalyst preparation.the heat treatment and reduction conditions during catalyst preparation. SMSI can be weakened by the decrement of metal-doped sites in the supporting oxide and can often deactivate catalysts by the encapsulation of active sites through these processes. To retain SMSI near the active sites and to enhance the catalytic activity of the nanocatalyst, it is essential to increase the number of surficial metal-doped sites between nanometal and the support. Herein, we propose a mild reduction process using dry methane (CH₄/CO₂) gas that suppresses the aggregation of nanoparticles and increases the exposed interface between the metal and support, Ni and cerium oxide. The effects of mild reduction on the chemical state of Ni-cerium oxide nanocatalysts were specifically investigated in this study. As a result, mild reduction led to form large amounts of the Ni³⁺ phase at the catalyst surface of which SMSI was significantly enhanced. It can be easily fabricated while the dry reforming of methane (DRM) reaction is on stream. The superior performance of the catalyst achieved a considerably high CH₄ conversion rate of approximately 60% and stable operation up to 550 h at a low temperature, 600 °C.

Structural and Chemical Transformations of Zinc Oxide Ultrathin Films on Pd(111) Surfaces

Structural and chemical transformations of ultrathin oxide films on transition metals lie at the heart of many complex phenomena in heterogeneous catalysis, such as the strong metal-support interaction (SMSI). However, there is limited atomic-scale understanding of these transformations, especially for irreducible oxides such as ZnO. Here, by combining density functional theory calculations and surface science techniques, including scanning tunneling microscopy, X-ray photoelectron spectroscopy, high-resolution electron energy loss spectroscopy, and low-energy electron diffraction, we investigated the interfacial interaction of well-defined ultrathin ZnO_xH_y films on Pd(111) under varying gas-phase conditions [ultrahigh vacuum (UHV), 5 × 10^-7 mbar of O₂, and a D₂/O₂ mixture] to shed light on the SMSI effect of irreducible oxides. Sequential treatment of submonolayer zinc oxide films in a D₂/O₂ mixture (1:4) at 550 K evoked reversible structural transformations from a bilayer to a monolayer and further to a Pd-Zn near-surface alloy, demonstrating that zinc oxide, as an irreducible oxide, can spread on metal surfaces and show an SMSI-like behavior in the presence of hydrogen. A mixed canonical-grand canonical phase diagram was developed to bridge the gap between UHV conditions and true SMSI environments, revealing that, in addition to surface alloy formation, certain ZnO_xH_y films with stoichiometries that do not exist in bulk are stabilized by Pd in the presence of hydrogen. Based on the combined theoretical and experimental observations, we propose that SMSI metal nanoparticle encapsulation for irreducible oxide supports such as ZnO involves both surface (hydroxy)oxide and surface alloy formation, depending on the environmental conditions.

Unravelling the Role of Strong Metal-Support Interactions in Boosting the Activity toward Hydrogen Evolution Reaction on Ir Nanoparticle/N-Doped Carbon Nanosheet Catalysts

Pt-based catalysts are commercial electrocatalysts for the hydrogen evolution reaction (HER), but their shortcomings of expensive and imperfect efficiency hinder their large-scale application. Here, we report an Ir-based HER catalyst supported by N-doped carbon nanosheets (Ir-NCNSs). The NCNSs, with a high surface area and unique atomic composition, enable Ir nanoparticles (NPs) to disperse at 2-3 nm and strongly coordinate to the Ir through Ir-N bonds, which exposes many active sites and strengthens their durability. The catalyst displays a low overpotential and a small Tafel slope of 46.3 mV at 10 mA cm^-2 and 52 mV dec^-1 in 0.5 M H₂SO₄, respectively. When used in 1.0 M KOH, Ir-NCNSs also show excellent electrocatalytic activity with a low overpotential of 125 mV at 10 mA cm^-2. The calculated results further suggest that Ir NPs and NCNSs have excellent selectivity for strong metal-support interactions, corresponding to a significant and stable HER characteristic. Our findings provide insight into the design of high-efficiency Ir-based HER catalysts.

Co3O4-Impregnated NiO-YSZ: An Efficient Catalyst for Direct Methane Electrooxidation

Co₃O₄-impregnated NiO-YSZ (yttria-stabilized zirconia) is a possible electrocatalyst for direct methane electrooxidation with both high catalytic activity and the ability to mitigate coking. The physical and electrochemical properties of Co₃O₄-impregnated NiO-YSZ anodes are investigated and benchmarked against NiO-YSZ and CeO₂-impregnated NiO-YSZ anodes. The following methane electrooxidation activity trend: Co₃O₄-impregnated NiO-YSZ > CeO₂-impregnated NiO-YSZ > NiO-YSZ with i_o (exchange current density) values of 88, 83, and 2 mA cm^-2, respectively, is obtained in the high overpotential region. The high activity of Co₃O₄-impregnated NiO-YSZ is attributed to the changes in the electronic structure and microstructure with the incorporation of nickel into the lattice of Co₃O₄ as observed using X-ray photoelectron spectroscopy, temperature-programmed reduction, high-resolution transmission electron microscopy, and field emission scanning electron microscopy. Co₃O₄-impregnated NiO-YSZ also demonstrated the least coking during operation, confirming its utility as a methane electrooxidation catalyst.

Carbon Monoxide Oxidation over rGO-Mediated Gold/Cobalt Oxide Catalysts with Strong Metal-Support Interaction

The strong interaction between Au nanoparticles and support (Au-metal oxide interface) usually governs the performance of a supported Au catalyst in heterogeneous catalysis. In this study, a series of Au/reduced graphene oxide (rGO)/three-dimensionally ordered macroporous (3DOM) Co₃O₄ catalysts with similar textural properties were prepared using the poly(methyl methacrylate)-templating and poly(vinyl alcohol)-protected reduction strategies. It was found that introducing reduced graphene oxide (rGO) as an electron-transfer bridge between Au and 3DOM Co₃O₄ could significantly strengthen the strong metal-support interaction (SMSI), thus enhancing the catalytic activity for CO oxidation. Among all of the catalysts, 1.86 wt % Au/2 wt % rGO/3DOM Co₃O₄ (1.86Au/2rGO/3DOM Co₃O₄) showed the highest catalytic activity: the CO reaction rate at 40 °C (432.8 μmol/(g_Au s)) was 2 times higher than that (208.2 μmol/(g_Au s)) over 1.87Au/3DOM Co₃O₄. The introduction of rGO could improve the activation of oxygen molecules and hence increase the low-temperature catalytic activity. The strategy for strengthening the SMSI via rGO mediation would guide the designing of highly efficient supported metal catalysts for low-temperature oxidation of CO.

Liberating Active Metals from Reducible Oxide Encapsulation for Superior Hydrogenation Catalysis

The strong metal-support interaction (SMSI) is of significant importance to heterogeneous catalysis. The electronic modification and encapsulation of active metals by reducible supports are the intrinsic properties of the SMSI, where the latter would decrease or even cease the catalytic activity of transition metals. Here, we demonstrate for the first time that alkalies are the functional additives that can effectively manipulate the SMSI for better hydrogenation catalysis. Specifically, both thermodynamic analyses and experimental results show that the addition of alkalies to the Ru/TiO₂ catalyst could form a titanate top layer that effectively hampers the migration of TiO_2-x to the surface of Ru nanoparticles. In the meantime, a substantially enhanced reduction of the support is achieved, leading to an even stronger electron donation from the support to Ru. The alkali-modified Ru/TiO₂ exhibits superior low-temperature catalytic activity in the hydrogenation of aromatics, which is ca. an order of magnitude higher than that of the commercial Ru/Al₂O₃ catalyst and is in clear contrast to that of the neat Ru/TiO₂ catalyst that shows negligible activity due to the severe encapsulation of Ru by TiO_2-x.

MXene Surface Terminations Enable Strong Metal-Support Interactions for Efficient Methanol Oxidation on Palladium

Efficient catalysis of the methanol oxidation reaction (MOR) greatly determines the widespread implementation of direct methanol fuel cells. Exploring a suitable support for noble metal catalysts with regard to decreasing the mass loading and optimizing the MOR activity remains a key challenge. Herein, we achieve an over 60% activity enhancement of a palladium (Pd) catalyst by introducing a two-dimensional Ti₃C₂T_x MXene as the support compared to a commercial Pd/C catalyst. Not only are more catalytically active Pd sites exposed on the Pd/MXene catalyst while maintaining a low mass loading, but the introduction of the MXene support also significantly alters the surface electronic structure of Pd. Specifically, spectroscopy and density functional theory (DFT) computations indicate that sufficiently electronegative terminations of the Ti₃C₂T_x MXene surface can induce strong metal-support interactions (SMSI) with the Pd catalyst, leading to optimal methanol adsorption. This MXene-supported Pd catalyst exhibits a much higher MOR current density (12.4 mA cm^-2) than that of commercial Pd/C (7.6 mA cm^-2). Our work largely optimizes the intrinsic activity of a Pd catalyst by the utilization of MXene surface terminations, and the crucial SMSI effects revealed herein open a rational avenue to the design of more efficient noble metal catalysts for MOR.

Self-Assembly of Mn(II)-Amidoximated PAN Polymeric Beads Complex as Reusable Catalysts for Efficient and Stable Heterogeneous Electro-Fenton Oxidation

A facile postsynthetic amidoxime modification method was reported on the preparation of transition-metal ions (Mn, Fe, and Co)-polyacrylonitrile (PAN) polymeric beads complex as reusable catalysts for efficient and stable heterogeneous electro-Fenton oxidation. Through one-step phase inversion, low-cost and chemically resistant polymeric PAN beads were fabricated on a large scale with controllable sizes and abundant porous structure. The postfunctionalization strategy led more active sites to be uniformly distributed into modified PAN beads owing to the favorable channel confined effect and chelate coordination. Compared with pure PAN beads, the modified composite catalysts exhibited remarkably higher activity and stability in electro-Fenton oxidation over wide pH range of 3-10 without any addition of H₂O₂. By analysis, the grafted amidoxime group was extremely beneficial for improving metal loading and binding force between active sites and organic supports, which accelerated the active sites autocatalytic cycle to promote H₂O₂ activation by means of excited electron transfer from composites' functional groups. The catalytic activity of Mn-amidoximated PAN evaluated by the turnover frequency was 15 times more than that of traditional iron oxide and very competitive to the reported metal-organic framework-based composites. Moreover, a strong metal and polymeric support interaction significantly enhanced the stabilization of active sites dispersed in porous matrix and solved the ever-present problem of metallic ions leaching to the greatest extent. The scalable introduction of functionalities into sophisticated structures after host framework synthesis will bring valuable insights to develop highly efficient and stable heterogeneous catalysts for green electrochemical oxidation in practical application.

High Catalytic Performance of a CeO2-Supported Ni Catalyst for Hydrogenation of Nitroarenes, Fabricated via Coordination-Assisted Strategy

A family of two-dimensional salen-type lanthanide complexes was synthesized through a facile solution diffusion method. The two-dimensional lanthanide complexes were characterized by single-crystal X-ray diffraction (SCXRD) and X-ray photoelectron spectroscopy (XPS) analytical techniques. The SCXRD and XPS analyses reveal that the obtained two-dimensional structures are rich in uncoordinated imine (-CH═N-) groups located on the skeleton of the salen-type organic ligand, which retain strong coordination ability with metal ions. On the basis of this unique feature, a highly dispersed CeO₂-supported Ni catalyst (Ni/CeO₂-CAS) with highly strong metal-support interaction was first synthesized via a coordination-assisted synthesis (CAS) method, which exhibits a much better catalytic activity in the hydrogenation of nitrobenzene than the traditional Ni/CeO₂-IWI catalyst prepared by incipient wetness impregnation (IWI). The origin of the improved catalytic activity of Ni/CeO₂-CAS as well as the role of Ni@Ce-H₂salen was revealed by using diverse characterizations. On the basis of the comparative characterization results, the superior catalytic performance of Ni/CeO₂-CAS to Ni/CeO₂-IWI could have resulted from the smaller and highly dispersed Ni nanoparticulates, the intensified Ni-CeO₂ interaction, the enhanced NiO reducibility, and the higher concentration of oxygen vacancies, favoring the H₂ dissociation and adsorption of the nitrobenzene reactant. The Ni/CeO₂-CAS catalyst also exhibits high catalytic performance for reduction of diverse nitroarenes to their corresponding functionalized arylamines. We anticipated that this coordination-assisted strategy may provide a new way for preparing other highly oxide-supported catalysts with potential applications in various catalytic reactions.

A Novel Magnetically Recoverable Ni-CeO2-x/Pd Nanocatalyst with Superior Catalytic Performance for Hydrogenation of Styrene and 4-Nitrophenol

Metal/support nanocatalysts consisting of various metals and metal oxides not only retain the basic properties of each component but also exhibit higher catalytic activity due to their synergistic effects. Herein, we report the creation of a highly efficient, long-lasting, and magnetic recyclable catalyst, composed of magnetic nickel (Ni) nanoparticles (NPs), active Pd NPs, and oxygen-deficient CeO_2-x support. These hybrid nanostructures composed of oxygen deficient CeO_2-x and active metal nanoparticles could effectively facilitate diffusion of reactant molecules and active site exposure that can dramatically accelerate the reaction rate. Impressively, the rate constant k and k/m of 4-nitrophenol reduction over 61 wt % Ni-CeO_2-x/0.1 wt % Pd catalyst are 0.0479 s^-1 and 2.1 × 10⁴ min^-1 g^-1, respectively, and the reaction conversion shows negligible decline even after 20 cycles. Meanwhile, the optimal 61 wt % Ni-CeO_2-x/3 wt % Pd catalyst manifests remarkable catalytic activity toward styrene hydrogenation with a high TOF of 6827 mol_styrene mol_Pd^-1 h^-1 and a selective conversion of 100% to ethylbenzene even after eight cycles. The strong metal-support interaction (SMSI) between Ni NPs, Pd NPs, and oxygen-deficient CeO_2-x support is beneficial for superior catalytic efficiency and stability toward hydrogenation of styrene and 4-nitrophenol. Moreover, Ni species could boost the catalytic activity of Pd due to their synergistic effect and strengthen the interaction between reactant and catalyst, which seems responsible for the great enhancement of catalytic activity. Our findings provide a new perspective to develop other high-performance and magnetically recoverable nanocatalysts, which would be widely applied to a variety of catalytic reactions.

Modifying the Interface Edge to Control the Electrical Transport Properties of Nanocontacts to Nanowires

Selecting the electrical properties of nanomaterials is essential if their potential as manufacturable devices is to be reached. Here, we show that the addition or removal of native semiconductor material at the edge of a nanocontact can be used to determine the electrical transport properties of metal-nanowire interfaces. While the transport properties of as-grown Au nanocatalyst contacts to semiconductor nanowires are well-studied, there are few techniques that have been explored to modify the electrical behavior. In this work, we use an iterative analytical process that directly correlates multiprobe transport measurements with subsequent aberration-corrected scanning transmission electron microscopy to study the effects of chemical processes that create structural changes at the contact interface edge. A strong metal-support interaction that encapsulates the Au nanocontacts over time, adding ZnO material to the edge region, gives rise to ohmic transport behavior due to the enhanced quantum-mechanical tunneling path. Removal of the extraneous material at the Au-nanowire interface eliminates the edge-tunneling path, producing a range of transport behavior that is dependent on the final interface quality. These results demonstrate chemically driven processes that can be factored into nanowire-device design to select the final properties.

Copper Nanocrystals Encapsulated in Zr-based Metal-Organic Frameworks for Highly Selective CO2 Hydrogenation to Methanol

We show that the activity and selectivity of Cu catalyst can be promoted by a Zr-based metal-organic framework (MOF), Zr₆O₄(OH)₄(BDC)₆ (BDC = 1,4-benzenedicarboxylate), UiO-66, to have a strong interaction with Zr oxide [Zr₆O₄(OH)₄(-CO₂)₁₂] secondary building units (SBUs) of the MOF for CO₂ hydrogenation to methanol. These interesting features are achieved by a catalyst composed of 18 nm single Cu nanocrystal (NC) encapsulated within single crystal UiO-66 (Cu⊂UiO-66). The performance of this catalyst construct exceeds the benchmark Cu/ZnO/Al₂O₃ catalyst and gives a steady 8-fold enhanced yield and 100% selectivity for methanol. The X-ray photoelectron spectroscopy data obtained on the surface of the catalyst show that Zr 3d binding energy is shifted toward lower oxidation state in the presence of Cu NC, suggesting that there is a strong interaction between Cu NC and Zr oxide SBUs of the MOF to make a highly active Cu catalyst.

Observing Oxygen Vacancy Driven Electroforming in Pt-TiO2-Pt Device via Strong Metal Support Interaction

Oxygen vacancy formation, migration, and subsequent agglomeration into conductive filaments in transition metal oxides under applied electric field is widely believed to be responsible for electroforming in resistive memory devices, although direct evidence of such a pathway is lacking. Here, by utilizing strong metal-support interaction (SMSI) between Pt and TiO2, we observe via transmission electron microscopy the electroforming event in lateral Pt/TiO2/Pt devices where the atomic Pt from the electrode itself acts as a tracer for the propagating oxygen vacancy front. SMSI, which originates from the d-orbital overlap between Pt atom and the reduced cation of the insulating oxide in the vicinity of oxygen vacancies, was optimized by fabricating nanoscale devices causing Pt atom migration tracking the moving oxygen vacancy front from the anode to cathode during electroforming. Experiments performed in different oxidizing and reducing conditions, which tune SMSI in the Pt-TiO2 system, further confirmed the role of oxygen vacancies during electroforming. These observations also demonstrate that the noble metal electrode may not be as inert as previously assumed.