Nickel-Mediated Radioiodination of Aryl and Heteroaryl Bromides: Rapid Synthesis of Tracers for SPECT Imaging

Metal-free iodination of arylaldehydes for total synthesis of aristogins A-F and hernandial

Iodine is one of the most effective sources for iodination of aromatic compounds; however, its electrophilicity is insufficient for direct iodination. The selection of appropriate environmentally friendly and cost-effective oxidants in combination with iodine for the iodination of aromatic rings, along with its application in the synthesis of natural products, holds significant importance. A highly efficient method utilizing I(III) as the initiator has been successfully developed for monoiodination of arylaldehydes. The method demonstrates good compatibility with a wide range of (hetero)aromatic aldehydes, resulting in moderate to excellent yields, without the need for any toxic, volatile or explosive reagents. The synthesis of seven natural products, namely aristogins A-F and hernandial, was achieved through this iodination followed by Ullmann-type coupling.

Ligand-Enabled Copper-Mediated Radioiodination of Arenes

The discovery of a copper precatalyst that facilitates the key mechanistic steps of arene halodeboronation has allowed a step change in the synthesis of radioiodine-containing arenes. The active precatalyst [Cu(OAc)(phen)2]OAc was shown to perform room temperature radio-iododeboronation of aryl boronic acids with 1-2 mol % loadings and 10 min reaction times. These mild conditions enable particularly clean reactions, as demonstrated with the efficient preparation of the radiopharmaceutical and SPECT tracer, meta-iodobenzylguanidine (MIBG).

Nickel Meets Aryl Thianthrenium Salts: Ni(I)-Catalyzed Halogenation of Arenes

Herein, a regioselective, late-stage two-step arene halogenation method is reported. We propose how unusual Ni(I)/(III) catalysis is enabled by a combination of aryl thianthrenium and Ni redox properties that is hitherto unachieved with other (pseudo)halides. The catalyst is accessed in situ from inexpensive NiCl₂·6(H₂O) and zinc without the need of supporting ligands.

Synthesis of Radioiodinated Compounds. Classical Approaches and Achievements of Recent Years

This review demonstrates the progress in the synthesis of radioiodinated compounds over the past decade. The possibilities and limitations of radiopharmaceuticals with different iodine isotopes, as well as the synthesis of low and high molecular weight compounds containing radioiodine, are discussed. An analysis of synthesis strategies, substrate frameworks, isolation methods, and metabolic stability, and the possibility of industrial production of radioiodinated organic derivatives which can find applications in the synthesis of drugs and diagnostics are presented.

Applications of Magnetic Particle Imaging in Biomedicine: Advancements and Prospects

Magnetic particle imaging (MPI) is a novel emerging noninvasive and radiation-free imaging modality that can quantify superparamagnetic iron oxide nanoparticles tracers. The zero endogenous tissue background signal and short image scanning times ensure high spatial and temporal resolution of MPI. In the context of precision medicine, the advantages of MPI provide a new strategy for the integration of the diagnosis and treatment of diseases. In this review, after a brief explanation of the simplified theory and imaging system, we focus on recent advances in the biomedical application of MPI, including vascular structure and perfusion imaging, cancer imaging, the MPI guidance of magnetic fluid hyperthermia, the visual monitoring of cell and drug treatments, and intraoperative navigation. We finally optimize MPI in terms of the system and tracers, and present future potential biomedical applications of MPI.

Engineering of magnetic nanoparticles as magnetic particle imaging tracers

Magnetic particle imaging (MPI) has recently emerged as a promising non-invasive imaging technique because of its signal linearly propotional to the tracer mass, ability to generate positive contrast, low tissue background, unlimited tissue penetration depth, and lack of ionizing radiation. The sensitivity and resolution of MPI are highly dependent on the properties of magnetic nanoparticles (MNPs), and extensive research efforts have been focused on the design and synthesis of tracers. This review examines parameters that dictate the performance of MNPs, including size, shape, composition, surface property, crystallinity, the surrounding environment, and aggregation state to provide guidance for engineering MPI tracers with better performance. Finally, we discuss applications of MPI imaging and its challenges and perspectives in clinical translation.

Copper-mediated radioiodination reaction through aryl boronic acid or ester precursor and its application to direct radiolabeling of a cyclic peptide

A copper-mediated radioiodination using aryl boronic precursors is attracting attention as a solution to oxidative iododestannylation and nickel-mediated radioiodination drawbacks. The copper-mediated radiolabeling method allows radioiodination at room temperature with stable aryl boronic precursors without preparing complex starting materials or reagents and can be performed in a reaction vessel exposed to air. This method has good potential in radiochemistry; however, studies on the scope of copper-mediated radioiodination through boronic precursors are insufficient. In particular, few reports have demonstrated the effect of protecting groups on radiolabeling efficiency. Therefore, the effect of the protecting group of aryl boronic acids on the copper-mediated radioiodination was investigated. In addition, this method, which does not require heating, is expected to be useful for direct radiolabeling of peptides. Thus, we attempted direct radioiodination of c(RGDyk) as an example. The resulting radioiodination method was well tolerated in various substrates and was unaffected by the pinacol ester-type protecting group. Also, c(RGDyk) was labeled with ¹²⁵ I via copper-mediated radioiodination using an aryl boronic acid precursor. The reaction time and yield were improved, compared with the indirect method. Furthermore, the large difference in polarity between the boronic acid precursor and the radiolabeled compound facilitated purification.

Orthogonal Stability and Reactivity of Aryl Germanes Enables Rapid and Selective (Multi)Halogenations

While halogenation is of key importance in synthesis and radioimaging, the currently available repertoire is largely designed to introduce a single halogen per molecule. This report makes the selective introduction of several different halogens accessible. Showcased here is the privileged stability of nontoxic aryl germanes under harsh fluorination conditions (that allow selective fluorination in their presence), while displaying superior reactivity and functional-group tolerance in electrophilic iodinations and brominations, outcompeting silanes or boronic esters under rapid and additive-free conditions. Mechanistic experiments and computational studies suggest a concerted electrophilic aromatic substitution as the underlying mechanism.

Recent Advances in Synthetic Methods for Radioiodination

Organic compounds bearing radioisotopes of iodine are widely used for biological research, diagnostic imaging, and radiotherapy. Early reported synthetic methods for the incorporation of radioiodine have generally involved high temperature reactions or strongly oxidizing conditions. To overcome these limitations and to cope with the demand for novel radioiodinated probes, there has been a surge in the development of new synthetic methodology for radioiodination. This synopsis describes the key transformations developed recently.

Biomedical applications of radioiodinated peptides

The overexpression of peptide receptors in certain tumors as compared to endogeneous expression levels represents the molecular basis for the design of peptide-based tools for targeted nuclear imaging and therapy. Receptor targeting with radiolabelled peptides became a very important imaging and/or therapeutic approach in nuclear medicine and oncology. A great variety of peptides has been radiolabelled with clinical relevant radionuclides, such as radiometals and radiohalogens. However, to the best of our knowledge concise and updated reviews providing information about the biomedical application of radioiodinated peptides are still missing. This review outlines the synthetic efforts in the preparation of radioiodinated peptides highlighting the importance of radioiodine in nuclear medicine, giving an overview of the most relevant radioiodination strategies that have been employed and describes relevant examples of their use in the biomedical field.

Metal-Mediated Halogen Exchange in Aryl and Vinyl Halides: A Review

Halogenated arenes and alkenes are of prime importance in many areas of science, especially in the pharmaceutical, agrochemical, and chemical industries. While the simplest ones are commercially available, some of them are still hardly accessible depending on their substitution patterns and the nature of the halogen atom. Reactions enabling the selective and efficient replacement of the halogen atom of an aryl or alkenyl halide by another one, lighter, or heavier, are therefore of major importance since they can be used for example to turn a less reactive aryl/alkenyl chloride into the more reactive iodinated derivatives or, in a reversed sense, to block an undesired reactivity, for late-stage modifications or for the introduction of a radionuclide. If some halogen exchange reactions are possible with activated substrates, they usually require catalysis with metal complexes. Remarkably efficient processes have been developed for metal-mediated halogen exchange in aryl and vinyl halides: they are overviewed, in a comprehensive manner, in this review article.

A one-pot radioiodination of aryl amines via stable diazonium salts: preparation of 125I-imaging agents

An operationally simple, one-pot, two-step tandem procedure that allows the incorporation of radioactive iodine into aryl amines via stable diazonium salts is described. The mild conditions are tolerant of various functional groups and substitution patterns, allowing late-stage, rapid access to a wide range of ¹²⁵I-labelled aryl compounds and SPECT radiotracers.

Rapid Iododeboronation with and without Gold Catalysis: Application to Radiolabelling of Arenes

Radiopharmaceuticals that incorporate radioactive iodine in combination with single‐photon emission computed tomography imaging play a key role in nuclear medicine, with applications in drug development and disease diagnosis. Despite this importance, there are relatively few general methods for the incorporation of radioiodine into small molecules. This work reports a rapid air‐ and moisture‐stable ipso‐iododeboronation procedure that uses NIS in the non‐toxic, green solvent dimethyl carbonate. The fast reaction and mild conditions of the gold‐catalysed method led to the development of a highly efficient process for the radiolabelling of arenes, which constitutes the first example of an application of homogenous gold catalysis to selective radiosynthesis. This was exemplified by the efficient synthesis of radiolabelled meta‐[¹²⁵I]iodobenzylguanidine, a radiopharmaceutical that is used for the imaging and therapy of human norepinephrine transporter‐expressing tumours.

Late stage iodination of biologically active agents using a one-pot process from aryl amines

A tandem process has been developed for the general preparation of aryl iodide compounds from anilines that is also applicable for the late-stage iodination of biologically active agents.

Radiosynthesis of SPECT tracers via a copper mediated 123I iodination of (hetero)aryl boron reagents

A general method for the copper mediated nucleophilic 123I-iodination of (hetero)aryl boronic esters and acids has been developed. The broad substrate scope of this radiosynthetic approach allows access to [123I]DPA-713, [123I]IMPY, [123I]MIBG and [123I]IPEB that are four commonly used SPECT radiotracers. Our results infer that aryl boronic reagents can now be employed as common precursors for both fluorine-18 and iodine-123 radiolabelling.

Unexpected Behavior of the Heaviest Halogen Astatine in the Nucleophilic Substitution of Aryliodonium Salts

Aryliodonium salts have become precursors of choice for the synthesis of (18) F-labeled tracers for nuclear imaging. However, little is known on the reactivity of these compounds with heavy halides, that is, radioiodide and astatide, at the radiotracer scale. In the first comparative study of radiohalogenation of aryliodonium salts with (125) I(-) and (211) At(-) , initial experiments on a model compound highlight the higher reactivity of astatide compared to iodide, which could not be anticipated from the trends previously observed within the halogen series. Kinetic studies indicate a significant difference in activation energy (Ea =23.5 and 17.1 kcal mol(-1) with (125) I(-) and (211) At(-) , respectively). Quantum chemical calculations suggest that astatination occurs via the monomeric form of an iodonium complex whereas iodination occurs via a heterodimeric iodonium intermediate. The good to excellent regioselectivity of halogenation and high yields achieved with diversely substituted aryliodonium salts indicate that this class of compounds is a promising alternative to the stannane chemistry currently used for heavy radiohalogen labeling of tracers in nuclear medicine.

Silver(I)-Catalyzed Iodination of Arenes: Tuning the Lewis Acidity of N-Iodosuccinimide Activation

A mild and rapid method for the iodination of arenes that utilizes silver(I) triflimide as a catalyst for activation of N-iodosuccinimide has been developed. The transformation was found to be general for a wide range of anisole, aniline, acetanilide, and phenol derivatives and allowed the late-stage iodination of biologically active compounds such as PIMBA, a SPECT imaging agent of breast cancer, and (-)-IBZM, a dopamine D2 receptor antagonist. The method was also modified for the radioiodination of arenes using a one-pot procedure involving the in situ generation of [(125)I]-N-iodosuccinimide followed by the silver(I)-catalyzed iodination.

Highly Regioselective Iodination of Arenes via Iron(III)-Catalyzed Activation of N-Iodosuccinimide

An iron(III)-catalyzed method for the rapid and highly regioselective iodination of arenes has been developed. Use of the powerful Lewis acid, iron(III) triflimide, generated in situ from iron(III) chloride and a readily available triflimide-based ionic liquid allowed activation of N-iodosuccinimide (NIS) and efficient iodination under mild conditions of a wide range of substrates including biologically active compounds and molecular imaging agents.

A novel 18F-labelled high affinity agent for PET imaging of the translocator protein

The translocator protein (TSPO) is an important target for imaging focal neuroinflammation in diseases such as brain cancer, stroke and neurodegeneration, but current tracers for non-invasive imaging of TSPO have important limitations. We present the synthesis and evaluation of a novel 3-fluoromethylquinoline-2-carboxamide, AB5186, which was prepared in eight steps using a one-pot two component indium(iii)-catalysed reaction for the rapid and efficient assembly of the 4-phenylquinoline core. Biological assessment and the implementation of a physicochemical study showed AB5186 to have low nanomolar affinity for TSPO, as well as optimal plasma protein binding and membrane permeability properties. Generation of [18F]-AB5186 through 18F incorporation was achieved in good radiochemical yield and subsequent in vitro and ex vivo autoradiography revealed the ability of this compound to bind with specificity to TSPO in mouse glioblastoma xenografts. Initial positron emission tomography imaging of a glioma bearing mouse and a healthy baboon support the potential for [18F]-AB5186 use as a radiotracer for non-invasive TSPO imaging in vivo.