A palladium-nanoparticle and silicon-nanowire-array hybrid: a platform for catalytic heterogeneous reactions

Effect of different reduction methods on Pd/Al2O3 for o-xylene oxidation at low temperature

Pd/Al₂O₃ was pretreated by CO, H₂ and NaBH₄ reduction, respectively. The reduced catalysts were tested for o-xylene oxidation and characterized by power X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and temperature-programmed decomposition of palladium hydride (TPDH). The characterizations indicate the pretreatments lead to distinct Pd particle sizes and amount of surface activated oxygen species, which are responsible for the catalytic performance. Compared with H₂ and NaBH₄ reduction methods, CO reduction shows a strong interaction between Pd and Al₂O₃ with smaller Pd particle size and more surface activated oxygen. It exhibited excellent catalytic performance, complete oxidation of 50 ppmV o-xylene at 85°C with a WHSV of 60,000 mL/(g∙hr).

Metal-Micelle Interaction Leading to Spontaneous Formation of Ligand-Free Palladium(0) Nanoparticles: Highly Efficient Catalysis Enabling Biaryl Ketone Formation from Carboxylic Acid Derivatives

A novel strategy has been developed to spontaneously form ligand-free Pd(0) nanoparticles (NPs) from water- and air-sensitive Pd₂dba₃ in water. These NPs are thoroughly characterized by IR, NMR, and mass spectrometry, revealing that the metal-micelle binding plays a critical role in their stability and activity. High-resolution transmission electron microscopy supported the ultrasmall nature of NPs, whereas X-ray photoelectron spectroscopy analysis confirmed the zero-oxidation state of Pd. The shielding effect of micelles and enhanced stability of NPs enabled fast cross-couplings of water-sensitive triazine adducts of carboxylic acid to form nonsymmetrical biaryl ketones. These naturally formed NPs are more efficient than new synthetic NPs formed under a hydrogen atmosphere and traditional NPs formed using the air-sensitive Grignard reagent as a reductant. The activity of naturally formed NPs is compared with that of synthetic NPs over 34 substrates, revealing that naturally formed NPs are much more efficient than synthetic NPs.

Catalysis of Alloys: Classification, Principles, and Design for a Variety of Materials and Reactions

Alloying has long been used as a promising methodology to improve the catalytic performance of metallic materials. In recent years, the field of alloy catalysis has made remarkable progress with the emergence of a variety of novel alloy materials and their functions. Therefore, a comprehensive disciplinary framework for catalytic chemistry of alloys that provides a cross-sectional understanding of the broad research field is in high demand. In this review, we provide a comprehensive classification of various alloy materials based on metallurgy, thermodynamics, and inorganic chemistry and summarize the roles of alloying in catalysis and its principles with a brief introduction of the historical background of this research field. Furthermore, we explain how each type of alloy can be used as a catalyst material and how to design a functional catalyst for the target reaction by introducing representative case studies. This review includes two approaches, namely, from materials and reactions, to provide a better understanding of the catalytic chemistry of alloys. Our review offers a perspective on this research field and can be used encyclopedically according to the readers' individual interests.

Microwave-Assisted Hydrogen-Free Reductive Deiodination of Iodoarenes with Silicon-Nanoarray Palladium-Nanoparticle Catalyst

The hydrogenolysis of iodoarenes using a silicon-nanoarray palladium catalyst under microwave irradiation was investigated. When triethanolamine was used as the sacrificial reductant, the reaction proceeded via reductive deiodination under an aerobic atmosphere even without the presence of the explosive hydrogen gas, affording the corresponding hydrogen-substituted arenes in high yields. No reaction occurred in the absence of microwaves, indicating a noticeable microwave effect.

Architecture engineering of nanostructured catalyst via layer-by-layer adornment of multiple nanocatalysts on silica nanorod arrays for hydrogenation of nitroarenes

Direct consideration for both, the catalytically active species and the host materials provides highly efficient strategies for the architecture design of nanostructured catalysts. The conventional wet chemical methods have limitations in achieving such unique layer-by-layer design possessing one body framework with many catalyst parts. Herein, an innovative physical method is presented that allows the well-regulated architecture design for an array of functional nanocatalysts as exemplified by layer-by-layer adornment of Pd nanoparticles (NPs) on the highly arrayed silica nanorods. This spatially confined catalyst exhibits excellent efficiency for the hydrogenation of nitroarenes and widely deployed Suzuki cross-coupling reactions; their facile separation from the reaction mixtures is easily accomplished due to the monolithic structure. The generality of this method for the introduction of other metal source has also been demonstrated with Au NPs. This pioneering effort highlights the feasibility of physically controlled architecture design of nanostructured catalysts which may stimulate further studies in the general domain of the heterogeneous catalytic transformations.

Preparation of Poly(ethylene glycol)@Polyurea Microcapsules Using Oil/Oil Emulsions and Their Application as Microreactors

The development process of catalytic core/shell microreactors, possessing a poly(ethylene glycol) (PEG) core and a polyurea (PU) shell, by implementing an emulsion-templated non-aqueous encapsulation method, is presented. The microreactors' fabrication process begins with an emulsification process utilizing an oil-in-oil (o/o) emulsion of PEG-in-heptane, stabilized by a polymeric surfactant. Next, a reaction between a poly(ethylene imine) (PEI) and a toluene-2,4-diisocyanate (TDI) takes place at the boundary of the emulsion droplets, resulting in the creation of a PU shell through an interfacial polymerization (IFP) process. The microreactors were loaded with palladium nanoparticles (NPs) and were utilized for the hydrogenation of alkenes and alkynes. Importantly, it was found that PEG has a positive effect on the catalytic performance of the developed microreactors. Interestingly, besides being an efficient green reaction medium, PEG plays two crucial roles: first, it reduces the palladium ions to palladium NPs; thus, it avoids the unnecessary use of additional reducing agents. Second, it stabilizes the palladium NPs and prevents their aggregation, allowing the formation of highly reactive palladium NPs. Strikingly, in one sense, the suggested system affords highly reactive semi-homogeneous catalysis, whereas in another sense, it enables the facile, rapid, and inexpensive recovery of the catalytic microreactor by simple centrifugation. The durable microreactors exhibit excellent activity and were recycled nine times without any loss in their reactivity.

Catalytic Reductive Alkylation of Amines in Batch and Microflow Conditions Using a Silicon-Wafer-Based Palladium Nanocatalyst

We describe the development of the catalytic reductive alkylation of amines with aldehydes under the atmospheric pressure of H2 using a brush-like silicon-nanostructure-supported palladium nanoparticle composite (SiNS-Pd) as a silicon-wafer-based reusable heterogeneous catalyst. The present reaction of primary and secondary amines with various aliphatic and aromatic aldehydes in the presence of the catalyst (0.02-0.05 mol % Pd) gave the corresponding secondary and tertiary amines including Lomerizine and Aticaprant in a 68% quantitative yield without overalkylation. We also designed and fabricated a flow device equipped with SiNS-Pd for microflow reactions, which was applied to the gas-liquid-solid triphasic reaction system (i.e., H2 gas, a substrate solution, and a solid catalyst). A multigram-scale reaction of aniline and benzaldehyde was demonstrated to obtain N-benzylaniline (ca. 4 g/day), in which the internal volume of the flow channel was 43 μL, the residence time was approximately 1 s, and the turnover number (TON) reached 4.0 × 104 in a continuous 24 h run (1.7 × 103 h-1; 0.50 s-1).

A decennary update on applications of metal nanoparticles (MNPs) in the synthesis of nitrogen- and oxygen-containing heterocyclic scaffolds

Heterocycles have been found to be of much importance as several nitrogen- and oxygen-containing heterocycle compounds exist amongst the various USFDA-approved drugs. Because of the advancement of nanotechnology, nanocatalysis has found abundant applications in the synthesis of heterocyclic compounds. Numerous nanoparticles (NPs) have been utilized for several organic transformations, which led us to make dedicated efforts for the complete coverage of applications of metal nanoparticles (MNPs) in the synthesis of heterocyclic scaffolds reported from 2010 to 2019. Our emphasize during the coverage of catalyzed reactions of the various MNPs such as Ag, Au, Co, Cu, Fe, Ni, Pd, Pt, Rh, Ru, Si, Ti, and Zn has not only been on nanoparticles catalyzed synthetic transformations for the synthesis of heterocyclic scaffolds, but also provide an inherent framework for the reader to select a suitable catalytic system of interest for the synthesis of desired heterocyclic scaffold.

Metallically gradated silicon nanowire and palladium nanoparticle composites as robust hydrogenation catalysts

Heterogeneous catalysis of alkenes to alkanes is of great importance in chemical industry, but more efficient and reusable heterogeneous catalysts are still demanded. Here, we report a metallically gradated composite of a silicon nanowire array and palladium nanoparticles which are reused for the hydrogenation of an alkene. The catalyst promotes the hydrogenation of stilbene with atmospheric hydrogen (0.1 MPa) to give diphenylethane quantitatively. The recovered catalyst can be reused, and mediates the reaction without loss of yield more than one hundred times, whereas the stability of Pd/C degrades rapidly over 10 cycles of reuse. The catalyst allows the hydrogenation of a variety of alkenes, including tetra-substituted olefins. Structural investigation reveals that palladium nanoparticles are metallically gradated onto the silicon nanowire array under mild conditions by agglomeration of palladium silicide, as confirmed by XAFS and XPS together with argon-ion sputtering. This means of metal agglomeration immobilization may be applicable to the preparation of a variety of metal nanoparticle catalysts.

Silicon nanoparticles coated with nanoporous carbon as a promising anode material for lithium ion batteries

As a promising anode candidate, silicon (Si) nanoparticles have been widely studied for use in lithium ion batteries.

Enhanced Heck reaction on flower-like Co(Mg or Ni)Al layered double hydroxide supported ultrafine PdCo alloy nanocluster catalysts: the promotional effect of Co

A series of PdCo alloy nanocluster (NC) catalysts x-PdCo_r/Co(Mg or Ni)Al-LDH (x: Pd loading, r: Co/Pd molar ratio) were synthesized by immobilizing ultrafine PdCo_r-PVP NCs on flower-like layered double hydroxide (LDH) supports. The sizes of PdCo alloy NCs of the catalysts can be elaborately tuned in ∼1.6-3.2 nm by both Co/Pd ratios and Pd loadings, and the PdCo NCs are mainly dispersed on the edge sites of LDH nanosheets upon a flower-like morphology. The PdCo bimetallic catalysts 0.81-PdCo_0.10/MgAl-LDH (2.6 ± 0.6 nm), 0.86-PdCo_0.28/MgAl-LDH (2.3 ± 0.7 nm) and 0.79-PdCo_0.54/MgAl-LDH (3.2 ± 0.9 nm) exhibit enhanced activity compared with the monometallic Pd catalyst for Heck coupling of iodobenzene with styrene. Particularly, 0.86-PdCo_0.28/MgAl-LDH shows the highest activity, which can be attributed to its smallest PdCo_0.28 alloy NCs, and the maximum electron density of the Pd⁰ center resulted from the electron transfer from Co and the strongest PdCo_0.28 NCs - LDH synergistic effect. 0.67-PdCo_0.28/CoAl-LDH shows much better activity than those of 0.64-PdCo_0.28/NiAl-LDH and 0.86-PdCo_0.28/MgAl-LDH. The lowest Pd loading sample 0.01-PdCo_0.28/CoAl-LDH (1.6 ± 0.4 nm) shows an ultrahigh turnover frequency of 163 000 h^-1 (Pd: 1.9 × 10^-5 mol%), which is the highest value obtained so far. Meanwhile, the catalyst shows excellent adaptability for the substrates and can be reused for 12 runs without significant loss of activity. The present work may provide a new idea for the simple and green synthesis of ultrafine Pd-based non-noble bimetallic catalysts for varied catalytic processes.

σ-H-H, σ-C-H, and σ-Si-H Bond Activation Catalyzed by Metal Nanoparticles

Activation of H-H, Si-H, and C-H bonds through σ-bond coordination has grown in the past 30 years from a scientific curiosity to an important tool in the functionalization of hydrocarbons. Several mechanisms were discovered via which the initially σ-bonded substrate could be converted: oxidative addition, heterolytic cleavage, σ-bond metathesis, electrophilic attack, etc. The use of metal nanoparticles (NPs) in this area is a more recent development, but obviously nanoparticles offer a much richer basis than classical homogeneous and heterogeneous catalysts for tuning reactivity for such a demanding process as C-H functionalization. Here, we will review the surface chemistry of nanoparticles and catalytic reactions occurring in the liquid phase, catalyzed by either colloidal or supported metal NPs. We consider nanoparticles prepared in solution, which are stabilized and tuned by polymers, ligands, and supports. The question we have addressed concerns the differences and similarities between molecular complexes and metal NPs in their reactivity toward σ-bond activation and functionalization.

Template-Free and Spontaneous Formation of Vertically Aligned Pd Nanofiber Arrays at the Liquid-Liquid Interface between Redox-Active Ionic Liquid and Water

Vertically aligned Pd nanofiber arrays (NFAs) have been prepared at the liquid-liquid interface between redox-active ionic liquid (RAIL) and water (W) via a template-free manner. The RAIL with high hydrophobicity, (ferrocenylmethyl)dodecyldimethylammonium bis(nonafluorobutanesulfonyl)amide, plays dual roles of reducing agent for Pd precursor ions and the hydrophobic liquid phase simultaneously, and the RAIL|W interface has been utilized as the formation site for the spontaneous growth of Pd NFAs. The Pd NFAs consist of three parts: layers formed by partly connected particles on the top, NFAs in the middle, and firm sheetlike layers on the bottom. Because of the top and bottom supporting layers, the antideformation ability and durability of the Pd NFAs with a length reaching several micrometers are enhanced. A possible mechanism for the formation of the Pd NFAs has been discussed. The Pd NFAs show a good stability and a higher electrocatalytic activity toward the ethanol oxidation reaction than a commercial Pd/C catalyst. The present study provides a new strategy for the template-free and spontaneous formation of Pd NFAs.

Surface deep profile synchrotron studies of mechanically modified top-down silicon nanowires array using ultrasoft X-ray absorption near edge structure spectroscopy

Atomic, electronic structure and composition of top-down metal-assisted wet-chemically etched silicon nanowires were studied by synchrotron radiation based X-ray absorption near edge structure technique. Local surrounding of the silicon and oxygen atoms in silicon nanowires array was studied on as-prepared nanostructured surfaces (atop part of nanowires) and their bulk part after, first time applied, in-situ mechanical removal atop part of the formed silicon nanowires. Silicon suboxides together with disturbed silicon dioxide were found in the composition of the formed arrays that affects the electronic structure of silicon nanowires. The results obtained by us convincingly testify to the homogeneity of the phase composition of the side walls of silicon nanowires and the electronic structure in the entire length of the nanowire. The controlled formation of the silicon nanowires array may lead to smart engineering of its atomic and electronic structure that influences the exploiting strategy of metal-assisted wet-chemically etched silicon nanowires as universal matrices for different applications.

Room temperature single-step synthesis of metal decorated boron-rich nanowires via laser ablation

Hybrid nanostructures, such as those with nanoparticles anchored on the surface of nanowires, or decorated nanowires, have a large number of potential and tested applications such as: gas sensing, catalysis, plasmonic waveguides, supercapacitors and more. The downside of these nanostructures is their production. Generally, multi-step synthesis procedures are used, with the nanowires and the nanoparticles typically produced separately and then integrated. The few existent single-step methods are lengthy or necessitate highly dedicated setups. In this paper we report a single-step and rapid (ca. 1 min) laser ablation synthesis method which produces a wide variety of boron-rich decorated nanowires. Furthermore, the method is carried at room temperature. The synthesis process consists on a filamentary jet ejection process driven by pressure gradients generated by the ablation plume on the rims of the irradiation crater. Simultaneously nanoparticles are nucleated and deposited on the filaments thus producing hybrid decorated nanowires.

Facile Fabrication of Highly Active Magnetic Aminoclay Supported Palladium Nanoparticles for the Room Temperature Catalytic Reduction of Nitrophenol and Nitroanilines

Magnetically recyclable nanocatalysts with excellent performance are urgent need in heterogeneous catalysis, due to their magnetic nature, which allows for convenient and efficient separation with the help of an external magnetic field. In this research, we developed a simple and rapid method to fabricate a magnetic aminoclay (AC) based an AC@Fe₃O₄@Pd nanocatalyst by depositing palladium nanoparticles (Pd NPs) on the surface of the magnetic aminoclay nanocomposite. The microstructure and the magnetic properties of as-prepared AC@Fe₃O₄@Pd were tested using transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM) analyses. The resultant AC@Fe₃O₄@Pd nanocatalyst with the magnetic Fe-based inner shell, catalytically activate the outer noble metal shell, which when combined with ultrafine Pd NPs, synergistically enhanced the catalytic activity and recyclability in organocatalysis. As the aminoclay displayed good water dispersibility, the nanocatalyst indicated satisfactory catalytic performance in the reaction of reducing nitrophenol and nitroanilines to the corresponding aminobenzene derivatives. Meanwhile, the AC@Fe₃O₄@Pd nanocatalyst exhibited excellent reusability, while still maintaining good activity after several catalytic cycles.

Specific and spatial labeling of choline-containing teichoic acids in Streptococcus pneumoniae by click chemistry

Propargyl-choline was efficiently incorporated into teichoic acid (TA) polymers on the surface of Streptococcus pneumoniae. The introduction of a fluorophore by click chemistry enabled sufficient labeling of the pneumococcus, as well as its specific detection when mixed with other bacterial species. The labeling is localized at the septal site, suggesting a similar location of the TA and peptidoglycan (PG) synthetic machineries. This method is a unique opportunity to improve our understanding of the spatial location of pneumococcal TA biosynthesis.

The Hydrophobic Effect Applied to Organic Synthesis: Recent Synthetic Chemistry "in Water"

Recent developments over the past few years in aqueous micellar catalysis are discussed. Applications to problems in synthesis are highlighted, enabled by the use of surfactants that self-aggregate in water into micelles as nanoreactors. These include amphiphiles that have been available for some time, as well as those that have been newly designed. Reactions catalyzed by transition metals, including Pd, Cu, Rh, and Au, are of particular focus.

Catalytic Activity of Silicon Nanowires Decorated with Gold and Copper Nanoparticles Deposited by Pulsed Laser Ablation

Silicon nanowires (SiNWs) decorated by pulsed laser ablation with gold or copper nanoparticles (labeled as AuNPs@SiNWs and CuNPs@SiNWs) were investigated for their catalytic properties. Results demonstrated high catalytic performances in the C_aryl-N couplings and subsequent carbonylations for gold and copper catalysts, respectively, that have no precedents in the literature. The excellent activity, attested by the very high turn over number (TON) values, was due both to the uniform coverage along the NW length and to the absence of the chemical shell surrounding the metal nanoparticles (MeNPs). A high recyclability was also observed and can be ascribed to the strong covalent interaction at the Me-Si interface by virtue of metal "silicides" formation.

Pd nanoparticles immobilized on carbon nanotubes with a polyaniline coaxial coating for the Heck reaction: coating thickness as the key factor influencing the efficiency and stability of the catalyst

Pd/PANI@CNTs were synthesized using a low-cost and simple method. The thickness of the PANI layer is the key in determining the stability of the catalyst in the Heck reaction.

Highly efficient aqueous phase reduction of nitroarenes catalyzed by phosphine-decorated polymer immobilized ionic liquid stabilized PdNPs

Phosphino-decorated polymer immobilised ionic liquid-stabilised PdNPs are highly efficient catalysts for the aqueous phase hydrogenation and transfer hydrogenation of aromatic nitro compounds in batch and continuous flow.

Large-Scale Fabrication of Silicon Nanowires for Solar Energy Applications

The development of silicon (Si) materials during past decades has boosted up the prosperity of the modern semiconductor industry. In comparison with the bulk-Si materials, Si nanowires (SiNWs) possess superior structural, optical, and electrical properties and have attracted increasing attention in solar energy applications. To achieve the practical applications of SiNWs, both large-scale synthesis of SiNWs at low cost and rational design of energy conversion devices with high efficiency are the prerequisite. This review focuses on the recent progresses in large-scale production of SiNWs, as well as the construction of high-efficiency SiNW-based solar energy conversion devices, including photovoltaic devices and photo-electrochemical cells. Finally, the outlook and challenges in this emerging field are presented.

Development of Batch and Flow Immobilized Catalytic Systems with High Catalytic Activity and Reusability

My mission in catalysis research is to develop highly active and reusable supported catalytic systems in terms of fundamental chemistry and industrial application. For this purpose, I developed three types of highly active and reusable supported catalytic systems. The first type involves polymeric base-supported metal catalysts: Novel polymeric imidazole-Pd and Cu complexes were developed that worked at the mol ppm level for a variety of organic transformations. The second involves catalytic membrane-installed microflow reactors: Membranous polymeric palladium and copper complex/nanoparticle catalysts were installed at the center of a microtube to produce novel catalytic membrane-immobilized flow microreactor devices. These catalytic devices mediated a variety of organic transformations to afford the corresponding products in high yield within 1-38 s. The third is a silicon nanowire array-immobilized palladium nanoparticle catalyst. This device promoted a variety of organic transformations as a heterogeneous catalyst. The Mizoroki-Heck reaction proceeded with 280 mol ppb (0.000028 mol%) of the catalyst, affording the corresponding products in high yield.

Catalytic Reductions and Tandem Reactions of Nitro Compounds Using in Situ Prepared Nickel Boride Catalyst in Nanocellulose Solution

A mild and efficient method for the in situ reduction of a wide range of nitroarenes and aliphatic nitrocompounds to amines in excellent yields using nickel chloride/sodium borohydride in a solution of TEMPO-oxidized nanocellulose in water (0.01 wt %) is described. The nanocellulose has a stabilizing effect on the catalyst, which increases the turnover number and enables low loading of nickel catalyst (0.1-0.25 mol % NiCl₂). In addition, two tandem protocols were developed in which the in situ formed amines were either Boc-protected to carbamates or further reacted with an epoxide to yield β-amino alcohols in excellent yields.

Size-Controlled Pd Nanoparticle Catalysts Prepared by Galvanic Displacement into a Porous Si-Iron Oxide Nanoparticle Host

Porous silicon nanoparticles containing both Pd and iron oxide nanoparticles are prepared and studied as magnetically recoverable catalysts for organic reductions. The Pd nanoparticles are generated in situ by electroless deposition of Pd(NH₃)₄²⁺, where the porous Si skeleton acts as both a template and as a reducing agent and the released ammonia ligands raise the local pH to exert control over the size of the Pd nanoparticles. The nanocomposites are characterized by transmission electron microscopy, energy-dispersive X-ray spectroscopy, nitrogen adsorption, X-ray diffraction, superconducting quantum interference device magnetization, and dynamic light scattering. The nanocomposite consists of a porous Si nanoparticle (150 nm mean diameter) containing ∼20 nm pores, uniformly decorated with a high loading of surfactant-free Pd nanoparticles (12 nm mean diameter) and superparamagnetic γ-Fe₂O₃ nanoparticles (∼7 nm mean diameter). The reduction of 4-nitrophenol to 4-aminophenol by sodium borohydride is catalyzed by the nanocomposite, which is stable through the course of the reaction. Catalytic reduction of the organic dyes methylene blue and rhodamine B is also demonstrated. The conversion efficiency and catalytic activity are found to be superior to a commercial Pd/C catalyst compared under comparable reaction conditions. The composite catalyst can be recovered from the reaction mixture by applying an external magnetic field due to the existence of the superparamagnetic iron oxide nanoparticles in the construct. The recovered particles retain their catalytic activity.

Atomic and molecular layer deposition: off the beaten track

ALD archetype and deviations from it.

Pd–ZnO nanowire arrays as recyclable catalysts for 4-nitrophenol reduction and Suzuki coupling reactions

Hybrid Pd–ZnO nanowire arrays for catalysis: Pd–ZnO@Zn nanowire arrays have been found to be applicable as recyclable catalysts for 4-nitrophenol reduction and Suzuki coupling reactions.

Palladium nanoparticles supported on organofunctionalized kaolin as an efficient heterogeneous catalyst for directed C–H functionalization of arylpyrazoles

A heterogeneous catalyst system based on the immobilization of Pd⁰ nanoparticles onto organofunctionalized kaolin is reported with a view to introducing new synthetic routes of directed C–H functionalization of arylpyrazoles.

Development of a Sulfur-Modified Glass-Supported Pd Nanoparticle Catalyst for Suzuki-Miyaura Coupling

A safe, facile and low-leaching (up to 0.17 ppm) sulfur-modified glass-supported palladium nanoparticle catalyst has been developed for the Suzuki-Miyaura coupling of aryl halides with aryl boronic acids. Most notably, this catalyst was highly recyclable and could be used up to 10 times without any discernible decrease in its activity.