Substrate templating guides the photoinduced reaction of C60 on calcite

Controlling On-Surface Photoactivity: The Impact of π-Conjugation in Anhydride-Functionalized Molecules on a Semiconductor Surface

On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either transfer methods or new strategies to perform reactions directly on inert surfaces. The use of on-surface light-induced reactions directly on semiconductor/insulating surfaces represents an alternative approach to address these challenges. Here, exploring the photochemical activity of different organic molecules on a SnSe semiconductor surface under ultra-high vacuum, we present a novel on-surface light-induced reaction. The selective photodissociation of the anhydride group is observed, releasing CO and CO2. Moreover, we rationalize the relationship between the photochemical activity and the π-conjugation of the molecular core. The different experimental behaviour of two model anhydrides was elucidated by theoretical calculations, showing how the molecular structure influences the distribution of the excited states. Our findings open new pathways for on-surface synthesis directly on technologically relevant substrates.

Light-Induced Increase of the Local Molecular Coverage on a Surface

Light is a versatile tool to remotely activate molecules adsorbed on a surface, for example, to trigger their polymerization. Here, we explore the spatial distribution of light-induced chemical reactions on a Au(111) surface. Specifically, the covalent on-surface polymerization of an anthracene derivative in the submonolayer coverage range is studied. Using scanning tunneling microscopy and X-ray photoemission spectroscopy, we observe a substantial increase of the local molecular coverage with the sample illumination time at the center of the laser spot. We find that the interplay between thermally induced diffusion and the reduced mobility of reaction products steers the accumulation of material. Moreover, the debromination of the adsorbed species never progresses to completion within the experiment time, despite a long irradiation of many hours.

Two-Dimensional Crystal Transition from Radialene to Cumulene on Ag(111) via Retro-[2 + 1] Cycloaddition

Two-dimensional (2D) crystal-to-crystal transition is an important method in crystal engineering because of its ability to directly create diverse crystal materials from one crystal. However, steering a 2D single-layer crystal-to-crystal transition on surfaces with high chemo- and stereoselectivity under ultra-high vacuum conditions is a great challenge because the transition is a complex dynamic process. Here, we report a highly chemoselective 2D crystal transition from radialene to cumulene with retention of stereoselectivity on Ag(111) via retro-[2 + 1] cycloaddition of three-membered carbon rings and directly visualize the transition process involving a stepwise epitaxial growth mechanism by the combination of scanning tunneling microscopy and non-contact atomic force microscopy. Using progression annealing, we found that isocyanides on Ag(111) at a low annealing temperature underwent sequential [1 + 1 + 1] cycloaddition and enantioselective molecular recognition based on C-H···Cl hydrogen bonding interactions to form 2D triaza[3]radialene crystals. In contrast, a higher annealing temperature induced the transformation of triaza[3]radialenes to generate trans-diaza[3]cumulenes, which were further assembled into 2D cumulene-based crystals through twofold N-Ag-N coordination and C-H···Cl hydrogen bonding interactions. By combining the observed distinct transient intermediates and density functional theory calculations, we demonstrate that the retro-[2 + 1] cycloaddition reaction proceeds via the ring opening of a three-membered carbon ring, sequential dechlorination/hydrogen passivation, and deisocyanation. Our findings provide new insights into the growth mechanism and dynamics of 2D crystals and have implications for controllable crystal engineering.

Self-assembly and photoinduced fabrication of conductive nanographene wires on boron nitride

Manufacturing molecule-based functional elements directly at device interfaces is a frontier in bottom-up materials engineering. A longstanding challenge in the field is the covalent stabilization of pre-assembled molecular architectures to afford nanodevice components. Here, we employ the controlled supramolecular self-assembly of anthracene derivatives on a hexagonal boron nitride sheet, to generate nanographene wires through photo-crosslinking and thermal annealing. Specifically, we demonstrate µm-long nanowires with an average width of 200 nm, electrical conductivities of 10⁶S m⁻¹ and breakdown current densities of 10¹¹A m⁻². Joint experiments and simulations reveal that hierarchical self-assembly promotes their formation and functional properties. Our approach demonstrates the feasibility of combined bottom-up supramolecular templating and top-down manufacturing protocols for graphene nanomaterials and interconnects, towards integrated carbon nanodevices.

The bottom-up fabrication of structures with robust performance in the nm-to-μm scale usable for integrated carbon nanodevices is challenging. Here the authors report micrometer-long, highly conducting nanographene wires following self-assembly, photo-crosslinking and thermal annealing of anthracene derivatives on hexagonal boron nitride sheets.

Thermal- vs Light-Induced On-Surface Polymerization

On-surface polymerization is a powerful bottom-up approach that allows for the growth of covalent architectures with defined properties using the two-dimensional confinement of a highly defined single-crystal surface. Thermal heating is the preferred approach to initiate the reaction, often via cleavage of halogen substituents from the molecular building blocks. Light represents an alternative stimulus but has, thus far, only rarely been used. Here, we present a direct comparison of on-surface polymerization of dibromo-anthracene molecules, induced either thermally or by light, and study the differences between the two approaches. Insight is obtained by a combination of scanning tunneling microscopy, locally studying the polymer shape and size, and X-ray photoelectron spectroscopy, which identifies bond formation by averaging over large surface areas. While the polymer length increases slowly with the sample heating temperature, illumination promotes only the formation of short covalent structures, independent of the duration of light exposure. Moreover, irradiation with UV light at different sample temperatures highlights the important role of molecular diffusion across the surface.

Synthesis on inert surfaces

Extraordinarily robust extended covalent organic nanostructures with unprecedented structures and intriguing chemical and electronic properties are currently synthesized on metal surfaces. Envisaged electronic applications, for instance in field effect transistors or sensors, however, demand insulating supports. To obviate the need for a cumbersome post-synthetic transfer from the metal growth surface to the target substrate, synthesis directly on inert surfaces is highly desirable. Albeit reversible polycondensations are broadly established on inert graphite surfaces, carbon-carbon (C-C) coupling remains mostly elusive. Thermally activated coupling on weakly interacting supports suffers from the "desorption problem", that is the premature desorption of reactants due to increased reaction barriers, which becomes even worse on inert surfaces due to diminished desorption barriers. Consequently, C-C coupling on inert surfaces requires new paradigms. We propose either photochemical coupling or activation of monomers prior to deposition as possible alternatives, discuss the current state-of-the-art and identify future challenges.

Diamantanethiols on Metal Surfaces: Spatial Configurations, Bond Dissociations, and Polymerization

We report the on-surface chemistry of diamantanethiols on metal surfaces by combining low-temperature STM studies with quantum mechanical density functional theory computations. First, we examined the spatial configurations of diamantanethiols on metal surfaces, in which the thiol-substrate confinement plays a key role. We then thermally desorbed the diamantanethiols from the substrate surfaces to determine whether the C-S or S-metal bonds preferentially break. Finally, we explored diamantane-4,9-dithiol and its polymerization on metal surfaces, forming linear nanodiamond disulfur chains. This work broadens the fundamental knowledge of functionalized diamondoid behavior on surfaces and provides a novel approach to link diamantane as necklace-chain nanodiamond hybrid materials.

Collective radical oligomerisation induced by an STM tip on a silicon surface

Over the past decade, on-surface fabrication of organic nanostructures has been widely investigated for the development of molecular electronic components, catalysts, and new materials. Here, we introduce a new strategy to obtain alkyl oligomers in a controlled manner using on-surface radical oligomerisations that are triggered by electrons between the tip of a scanning tunnelling microscope and the Si(111)√3 ×√3 R30°-B surface. This electron transfer event only occurs when the bias voltage is below -4.5 V and allows access to reactive radical species under exceptionally mild conditions. This transfer can effectively 'switch on' a sequence leading to the formation of oligomers of defined size distribution thanks to the on-surface confinement of the reactive species. Our approach enables new ways to initiate and control radical oligomerisations with tunnelling electrons, leading to molecularly precise nanofabrication.

Impact of the reaction pathway on the final product in on-surface synthesis

On-surface synthesis provides a very promising strategy for creating stable functional structures on surfaces. In the past, classical reactions known from solution synthesis have been successfully transferred onto a surface. Due to the presence of the surface, on-surface synthesis provides the potential of directing the reaction pathway in a manner that might not be accessible in classical solution synthesis. In this work, we present evidence for an acetylene polymerization from a terminal alkyne monomer deposited onto calcite (10.4). Strikingly, although the dimer forms on the surface as well, we find no indication for diacetylene polymerization. This is in sharp contrast to what is observed when directly depositing the dimers on the surface. The different pathways are linked to the specific arrangement of the dimers on the surface. When forming stripes along the [-4-21] direction, the diacetylene polymerization is prohibited, while when arranged in stripes aligned along the [010] direction, the dimers can undergo diacetylene polymerization. Our work thus constitutes a demonstration for controlling the specific reaction pathway in on-surface synthesis by the presence of the surface.

Controlling a Chemical Coupling Reaction on a Surface: Tools and Strategies for On-Surface Synthesis

On-surface synthesis is appearing as an extremely promising research field aimed at creating new organic materials. A large number of chemical reactions have been successfully demonstrated to take place directly on surfaces through unusual reaction mechanisms. In some cases the reaction conditions can be properly tuned to steer the formation of the reaction products. It is thus possible to control the initiation step of the reaction and its degree of advancement (the kinetics, the reaction yield); the nature of the reaction products (selectivity control, particularly in the case of competing processes); as well as the structure, position, and orientation of the covalent compounds, or the quality of the as-formed networks in terms of order and extension. The aim of our review is thus to provide an extensive description of all tools and strategies reported to date and to put them into perspective. We specifically define the different approaches available and group them into a few general categories. In the last part, we demonstrate the effective maturation of the on-surface synthesis field by reporting systems that are getting closer to application-relevant levels thanks to the use of advanced control strategies.

Controlled Fragmentation of Single Molecules with Atomic Force Microscopy by Employing Doubly Charged States

By atom manipulation we performed on-surface chemical reactions of a single molecule on a multilayer insulating film using noncontact atomic force microscopy. The single-electron sensitivity of atomic force microscopy allows us to follow the addition of single electrons to the molecule and the investigation of the reaction products. By performing a novel strategy based on long-lived doubly charged states a single molecule is fragmented. The fragmentation can be reverted by again changing the charge state of the system, characterizing a reversible reaction. The experimental results in addition to density-functional theory provide insight into the charge states of the different products and reaction pathways. Similar molecular systems could be used as charge-transfer units and to induce reversible chemical reactions.

On-surface synthesis on a bulk insulator surface

On-surface synthesis has rapidly emerged as a most promising approach to prepare functional molecular structures directly on a support surface. Compared to solution synthesis, performing chemical reactions on a surface offers several exciting new options: due to the absence of a solvent, reactions can be envisioned that are otherwise not feasible due to the insolubility of the reaction product. Perhaps even more important, the confinement to a two-dimensional surface might enable reaction pathways that are not accessible otherwise. Consequently, on-surface synthesis has attracted great attention in the last decade, with an impressive number of classical reactions transferred to a surface as well as new reactions demonstrated that have no classical analogue. So far, the majority of the work has been carried out on conducting surfaces. However, when aiming for electronic decoupling of the resulting structures, e.g. for the use in future molecular electronic devices, non-conducting surfaces are highly desired. Here, we review the current status of on-surface reactions demonstrated on the (10.4) surface of the bulk insulator calcite. Besides thermally induced C-C coupling of halogen-substituted aryls, photochemically induced [2  +  2] cycloaddition has been proven possible on this surface. Moreover, experimental evidence exists for coupling of terminal alkynes as well as diacetylene polymerization. While imaging of the resulting structures with dynamic atomic force microscopy provides a direct means of reaction verification, the detailed reaction pathway often remains unclear. Especially in cases where the presence of metal atoms is known to catalyze the corresponding solution chemistry reaction (e.g. in the case of the Ullmann reaction), disclosing the precise reaction pathway is of importance to understand and generalize on-surface reactivity on a bulk insulator surface. To this end, density-functional theory calculations have proven to provide atomic-scale insights that have greatly contributed to unravelling the details of on-surface synthesis on a bulk insulator surface.