Sites for Methane Activation on Lithium-Doped Magnesium Oxide Surfaces

Atomistic insights from DFT calculations into the catalytic properties on ceria-lanthanum clusters for methane activation

Improving the catalytic performance of materials based on cerium oxide (CeO2) for the activation of methane (CH4) can be achieved through the following strategies: mixture of CeO2 with different oxides (e.g., CeO2-La2O3) and the use of particles with different sizes. In this study, we present a theoretical investigation of the initial CH4 dehydrogenation on (La2Ce2O7)n clusters, where n = 2, 4, and 6. Our framework relies on density functional theory calculations combined with the unity bond index-quadratic exponential potential approximation. Our results indicate that chemical species arising from the first dehydrogenation of CH4, that is, CH3 and H, bind through the formation of C-O and H-O bonds with the clusters, respectively. The coordination of the adsorption site and the chemical environment plays a crucial role in the magnitude of the adsorption energy; for example, species adsorb more strongly in the low-coordinated topO sites located close to the La atoms. Thus, it affects the activation energy barrier, which tends to be lower in configurations where the adsorption of the chemical species is stronger. During CH4 dehydrogenation, the CH3 radical can be present in a planar or tetrahedral configuration. Its conformation changes as a function of the charge transference between the molecule and the cluster, which depends on the CH3-cluster distance. Finally, we analyze the effects of the Hubbard effective parameter (Ueff) on adsorption properties, as the magnitude of localization of Ce f-states affects the hybridization of the interaction between the molecule and the clusters and hence the magnitude of the adsorption energies. We obtained a linear decrease in the adsorption energies by increasing the Ueff parameter; however, the activation energy is only slightly affected.

Lithium carbonate-promoted mixed rare earth oxides as a generalized strategy for oxidative coupling of methane with exceptional yields

The oxidative coupling of methane to higher hydrocarbons offers a promising autothermal approach for direct methane conversion, but its progress has been hindered by yield limitations, high temperature requirements, and performance penalties at practical methane partial pressures (~1 atm). In this study, we report a class of Li2CO3-coated mixed rare earth oxides as highly effective redox catalysts for oxidative coupling of methane under a chemical looping scheme. This catalyst achieves a single-pass C2+ yield up to 30.6%, demonstrating stable performance at 700 °C and methane partial pressures up to 1.4 atm. In-situ characterizations and quantum chemistry calculations provide insights into the distinct roles of the mixed oxide core and Li2CO3 shell, as well as the interplay between the Pr oxidation state and active peroxide formation upon Li2CO3 coating. Furthermore, we establish a generalized correlation between Pr4+ content in the mixed lanthanide oxide and hydrocarbons yield, offering a valuable optimization strategy for this class of oxidative coupling of methane redox catalysts.

Lithium Promotes Acetylide Formation on MgO During Methane Coupling Under Non-Oxidative Conditions

A prototypical material for the oxidative coupling of methane (OCM) is Li/MgO, for which Li is known to be essential as a dopant to obtain high C2 selectivities. Herein, Li/MgO is demonstrated to be an effective catalyst for non-oxidative coupling of methane (NOCM). Moreover, the presence of Li is shown to favor the formation of magnesium acetylide (MgC2 ), while pure MgO promotes coke formation as evidenced by solid-state 13 C NMR, thus indicating that Li promotes C-C bond formation. Metadynamic simulations of the carbon mobility in MgC2 and Li2 C2 at the density functional theory (DFT) level show that carbon easily diffuses as a C2 unit at 1000 °C. These insights suggest that the enhanced C2 selectivity for Li-doped MgO is related to the formation of Li and Mg acetylides.

Activity Origin of the Nickel Cluster on TiC Support for Nonoxidative Methane Conversion

Designing an active and selective catalyst for nonoxidative conversion of methane under mild conditions is critical for natural gas utilization as a chemical feedstock. Here, we demonstrate that the origin of the selective nonoxidative conversion of methane by the titanium carbide supported nickel cluster arises from the formation of a nickel carbide site under the reaction conditions, which could stabilize the CH_x intermediate to facilitate the C-C coupling, but further coking is rather limited. The reaction mechanism reveals that the C₂ products can be formed via a key -CH_x-CH₃ intermediate. In addition, we demonstrate that boration of the nickel cluster site can improve the methane conversion toward C₂ products. That higher activity and selectivity from the moderate rise in d orbital energy levels can therefore be considered as a descriptor of the catalyst effectiveness. These findings provide an understanding of the dynamic behavior of the single nickel cluster toward methane conversion to C₂ products and guidance for their future rational design.

The C-H Bond Activation Triggered by Subsurface Mo Dopant on MgO Catalyst in Oxidative Coupling of Methane

In this work, density functional theory calculations are performed to explore the unique role of Mo dopant on MgO in oxidative coupling of methane. It is revealed that subsurface Mo dopant significantly enhanced the adsorption and activation of oxygen molecules. The combination of adsorbed oxygen and surface Mg exhibited a balanced activity for C-H bond activation and release of methyl radical which paves the way to activate methane with a promising yield.

Understanding and tackling the activity and selectivity issues for methane to methanol using single atom alloys

The process for the direct oxidation of methane to methanol is investigated on single atom alloys using density functional theory. A catalyst search is performed across FCC metal single atom alloys. 7 single atom alloys are found as candidates and microkinetic modelling is performed. The activity and selectivity are remarkably improved over that of pure palladium metal, yet remain unideal.

Revealing the Synergetic Effects between Reactants in Oxidative Coupling of Methane on Stepped MgO(100) Catalyst

The oxidative coupling of methane (OCM) on MgO is often computationally explored via Mars-Krevelen (MvK) mechanism. However, the difficult desorption of CH3 radical at stepped MgO surface shadow the feasibility of mechanism. In this work, density functional theory calculations are performed to unravel the syngenetic effects between reactants which lead to a new Langmuir-Hinshelwood (L-H)-like mechanism. It was found that co-adsorption of reactants pave ways for CH3 radical formation with negligible desorption energy. The role of oxygen molecule is not only to oxidize reduced surface but also decrease the reactivity of Mg-O site which facile CH3 desorption. Electronic structure analysis indicated the distinct feature along pathway between MvK and L-H. The current work clearly indicated the importance of effective interactions between reactants and provided new insights on the reaction mechanism of OCM.

Gas-Phase Mechanism of O.- /Ni2+ -Mediated Methane Conversion to Formaldehyde

The gas-phase reaction of NiAl₂ O₄ ⁺ with CH₄ is studied by mass spectrometry in combination with vibrational action spectroscopy and density functional theory (DFT). Two product ions, NiAl₂ O₄ H⁺ and NiAl₂ O₃ H₂ ⁺ , are identified in the mass spectra. The DFT calculations predict that the global minimum-energy isomer of NiAl₂ O₄ ⁺ contains Ni in the +II oxidation state and features a terminal Al-O^.- oxygen radical site. They show that methane can react along two competing pathways leading to formation of either a methyl radical (CH₃ ⋅) or formaldehyde (CH₂ O). Both reactions are initiated by hydrogen atom transfer from methane to the terminal O^.- site, followed by either CH₃ ⋅ loss or CH₃ ⋅ migration to an O^2- site next to the Ni²⁺ center. The CH₃ ⋅ attaches as CH₃ ⁺ to O^2- and its unpaired electron is transferred to the Ni-center reducing it to Ni⁺ . The proposed mechanism is experimentally confirmed by vibrational spectroscopy of the reactant and two different product ions.

Metal Ions (Li, Mg, Zn, Ce) Doped into La2O3 Nanorod for Boosting Catalytic Oxidative Coupling of Methane

A series of La2O3 nanorod catalysts with doping of active metal ions (Li, Mg, Zn and Ce) were synthesized successfully by the hydrothermal method. The La2O3 nanorods show a uniform size with the length of 50–200 nm and the width of 5–20 nm, and the {110} crystal facet is a preferentially exposed surface. The active metal ions (Li, Mg, Zn and Ce) doped into the lattice of La2O3 nanorods enhance the selectivity of the desired products during oxidative coupling of methane (OCM) and decrease the reaction temperature. Among these catalysts, the Mg-La2O3 catalyst exhibits the best catalytic performance during the OCM reaction, i.e., its selectivity and yield of C2 products at 780 °C is 73% and 21%, respectively. The effect of doped metal ions on catalytic activity for OCM was systematically investigated. Insight into the fabrication strategy and promoting factors of the OCM reaction indicates the potential to further design a high-efficient catalyst in the future.

Interfacial catalytic materials; challenge for inorganic synthetic chemistry

Interfacial catalysts are indispensable functional materials in the energy transformation. The traditional empirical search strategies reach their potential. Knowledge-based approaches have not been able to deliver innovative and scalable solutions. Following a short analysis of the origin of these shortcomings a fresh attempt on the material challenge of catalysis is proposed. The approach combines functional understanding of material dynamics derived from operando analysis with digital catalysis science guiding the exploration of non-linear interactions of material genes to catalytic functions. This critically requires the ingenuity of the synthetic inorganic chemist to let us understand the reactivity of well-defined materials under the specific conditions of catalytic operation. It is the understanding of how the kinetics of phase changes brings about and destroys active sites in catalytic materials that forms the basis of realistic material concepts. A rigorous prediction and engineering of these processes may not be possible due to the complexity of options involved.

Direct conversion of methane to methanol on boron nitride-supported copper single atoms

Direct conversion of methane to methanol (DMTM) under mild conditions is one of the most attractive and challenging processes in catalysis. By using density functional theory calculations, we systematically investigate the catalytic performance of Cu single atoms supported on O-doped BN in different coordination environments as a DMTM catalyst. Computations demonstrate that Cu coordinated with one O atom and two N atoms on O-doped BN (Cu₁/O₁N₂-BN) exhibited the highest catalytic activity for DMTM at room temperature with quite a low rate-determining step energy barrier of 0.46 eV. The moderate adsorption of *O atoms, selective stabilization of CH₃ species, and easy desorption of CH₃OH are responsible for the unique activity of Cu₁/O₁N₂-BN for DMTM. In addition, the adsorption free energy of *O atoms produced by the dissociation of O-donor molecules is a suitable descriptor for predicting the catalytic performance of materials and accelerating the discovery of catalysts for DMTM. This work opens new avenues to develop highly efficient catalysts for DMTM.

Activation of CO2 and CH4 on MgO surfaces: mechanistic insights from first-principles theory

One of the most challenging topics in heterogeneous catalysis is conversion of CH₄ to higher hydrocarbons. Direct conversion of CH₄ to ethylene can be achieved via the oxidative coupling of methane (OCM) reaction. Despite studies which have shown MgO to activate CH₄ and initiate the OCM reaction, its large-scale applications face a significant impediment due to formation of a byproduct, CO₂, and poisoning of the catalyst due to carbonate formation. In the present work, we address two aspects of the OCM reaction on MgO surfaces: carbonate formation on the surface of the catalyst, and (dissociative) adsorption of CH₄. We use first-principles density functional theoretical calculations to determine the energetics and underlying mechanisms of interaction of CO₂ and CH₄ with various surfaces of MgO: (100), (110), and (111) (both Mg- and O-terminations), and the seldom studied, hydroxylated (111) MgO surface with O-termination. We find that the strength of the interaction of CO₂ with MgO surfaces depends on several factors: their surface energies, coordination number of surface O atoms, and ability to donate electrons. However, the O-terminated (111) surface of MgO bucks all aforementioned factors, with only oxygen richness affecting its reactivity towards CO₂. The interaction of CH₄ with MgO surfaces depends primarily on the coordination number of the surface O atoms and the orientation of the CH₄ molecule with respect to the surface. Finally, we provide insights into (a) formation of surface carbonates, which is relevant to CO₂ capture and conversion, and (b) C-H bond activation on MgO surfaces, which is crucial for direct conversion of CH₄ to value-added chemicals.

Use of heterometallic alkali metal–magnesium aryloxides in ring-opening polymerization of cyclic esters

The alkali metal–magnesium aryloxides of the general formula [Mg2M′2(OAr)6(THF)x] (for M′ = Li, Na, K, and x = 0, 2, 4) were used to investigate the cooperativity effect of different metal sites on the ring-opening polymerization of l-lactide.

O2 Activation with a Sterically Encumbered, Oxygen-Deficient Polyoxovanadate-Alkoxide Cluster

The isolation of the oxygen-deficient, polyoxovanadate-alkoxide (POV-alkoxide) cluster, [ⁿBu₄N][V₆O₆(OMe)₁₂(MeCN)], and its subsequent reactivity with oxygen (O₂), has demonstrated the utility of these assemblies as molecular models for heterogeneous metal oxide catalysts. However, the mechanism through which this cluster activates and reduces O₂ to generate the oxygenated species is poorly understood. Currently it is speculated that this POV-alkoxide mediates the four-electron O-O bond cleavage through an O₂ bridged dimeric intermediate, a mechanism which is not viable for O₂ reduction at solid-state metal oxide surfaces. Here, we report the successful activation and reduction of O₂ by the calix-functionalized POV-alkoxide cluster, [ⁿBu₄N][(calix)V₆O₆(OMe)₈](MeCN)] (calix = 4-tert-butylcalix[4]arene). The steric hindrance imparted to the open vanadium site by the calix motif eliminates the possibility of cooperative, bimolecular O₂ activation, allowing for a comparison of the reactivity of this system with that of the nonfunctionalized POV-alkoxide described previously. Rigorous characterization of the calix-substituted assembly, enabled by its newfound solubility in organic solvent, reveals that the incorporation of the tetradentate aryloxide ligand into the POV-alkoxide scaffold perturbs the electronic communication between the site-differentiated vanadium(III) ion and the cluster core. Collectively, our results provide insight into the physiochemical factors that are important during the O₂ reduction reaction at oxygen-deficient sites in reduced POV-alkoxide clusters.

Oxidative Coupling of Methane: Perspective for High-Value C2 Chemicals

The oxidative coupling of methane (OCM) to C2 hydrocarbons (C2H4 and C2H6) has aroused worldwide interest over the past decade due to the rise of vast new shale gas resources. However, obtaining higher C2 selectivity can be very challenging in a typical OCM process in the presence of easily oxidized products such as C2H4 and C2H6. Regarding this, different types of catalysts have been studied to achieve desirable C2 yields. In this review, we briefly presented three typical types of catalysts such as alkali/alkaline earth metal doped/supported on metal oxide catalysts (mainly for Li doped/supported catalysts), modified transition metal oxide catalysts, and pyrochlore catalysts for OCM and highlighted the features that play key roles in the OCM reactions such as active oxygen species, the mobility of the lattice oxygen and surface alkalinity of the catalysts. In particular, we focused on the pyrochlore (A2B2O7) materials because of their promising properties such as high melting points, thermal stability, surface alkalinity and tunable M-O bonding for OCM reaction.

"Soft" oxidative coupling of methane to ethylene: Mechanistic insights from combined experiment and theory

The oxidative coupling of methane to ethylene using gaseous disulfur (2CH₄ + S₂ → C₂H₄ + 2H₂S) as an oxidant (SOCM) proceeds with promising selectivity. Here, we report detailed experimental and theoretical studies that examine the mechanism for the conversion of CH₄ to C₂H₄ over an Fe₃O₄-derived FeS₂ catalyst achieving a promising ethylene selectivity of 33%. We compare and contrast these results with those for the highly exothermic oxidative coupling of methane (OCM) using O₂ (2CH₄ + O₂ → C₂H₄ + 2H₂O). SOCM kinetic/mechanistic analysis, along with density functional theory results, indicate that ethylene is produced as a primary product of methane activation, proceeding predominantly via CH₂ coupling over dimeric S-S moieties that bridge Fe surface sites, and to a lesser degree, on heavily sulfided mononuclear sites. In contrast to and unlike OCM, the overoxidized CS₂ by-product forms predominantly via CH₄ oxidation, rather than from C₂ products, through a series of C-H activation and S-addition steps at adsorbed sulfur sites on the FeS₂ surface. The experimental rates for methane conversion are first order in both CH₄ and S₂, consistent with the involvement of two S sites in the rate-determining methane C-H activation step, with a CD₄/CH₄ kinetic isotope effect of 1.78. The experimental apparent activation energy for methane conversion is 66 ± 8 kJ/mol, significantly lower than for CH₄ oxidative coupling with O₂ The computed methane activation barrier, rate orders, and kinetic isotope values are consistent with experiment. All evidence indicates that SOCM proceeds via a very different pathway than that of OCM.

Segregation Engineering in MgO Nanoparticle-Derived Ceramics: The Impact of Calcium and Barium Admixtures on the Microstructure and Light Emission Properties

Nanostructured segregates of alkaline earth oxides exhibit bright photoluminescence emission and great potential as components of earth-abundant inorganic phosphors. We evaluated segregation engineering of Ca²⁺- and Ba²⁺-admixtures in sintered MgO nanocube-derived compacts. Compaction and sintering transform the nanoparticle agglomerates into ceramics with residual porosities of Φ = 24-28%. Size mismatch drives admixture segregation into the intergranular region, where they form thin metal oxide films and inclusions decorating grain boundaries and pores. An important trend in the median grain size evolution of the sintered bodies with d_{Ca(10 at. %)} = 90 nm < d_{Ba(1 at. %)} = 160 nm < d_MgO = 250 nm ∼ d_{Ca(1 at. %)} = 280 nm < d_{Ba(10 at. %)} = 870 nm is rationalized by segregation and interface energies, barriers for ion diffusion, admixture concentration, and the increasing surface basicity of the grains during processing. We outline the potential of admixtures on interface engineering in MgO nanocrystal-derived ceramics and demonstrate that in the sintered compacts, the photoluminescence emission originating from the grain surfaces is retained. Interior parts of the ceramic, which are accessible to molecules from the gas phase, contribute with oxygen partial pressure-dependent intensities to light emission.

High-Resolution Lithographic Patterning with Organotin Films: Role of CO2 in Differential Dissolution Rates

Details of the chemistry enabling the patterning of organotin photoresists to single-digit-nm resolution continue to engage study. In this report, we examine the contributions of atmospheric gases to the differential dissolution rates of an n-butyltin oxide hydroxide photoresist. Cryo scanning tunneling electron microscopy (cryo-STEM) produces a micrograph of the latent image of an irradiated resist film, readily distinguishing exposed and unexposed regions. Temperature-programmed desorption mass spectrometry (TPD-MS) and cryo electron energy loss spectroscopy (cryo-EELS) show that irradiated films are depleted in carbon through desorption of butane and butene. Upon aging in air, irradiated films absorb H₂O, as previously established. TPD-MS also reveals a previously unrecognized absorption of CO₂, which correlates to a heightened dissolution contrast. This absorption may play an active role in determining intrinsic patterning performance and its variability based on changes in atmospheric-gas composition.

Oxidative coupling of methane over sodium zirconate catalyst

Previously only known for CO₂ absorption and CO oxidation, Na₂ZrO₃ is shown to be a selective catalyst for the oxidative coupling of methane (OCM) by detailed kinetic measurements and kinetic analysis.

Status and prospects of the decentralised valorisation of natural gas into energy and energy carriers

We critically review the recent advances in process, reactor, and catalyst design that enable process miniaturisation for decentralised natural gas upgrading into electricity, liquefied natural gas, fuels and chemicals.

Valence and Structure Isomerism of Al2FeO4+: Synergy of Spectroscopy and Quantum Chemistry

We provide spectroscopic and computational evidence for a substantial change in structure and gas phase reactivity of Al₃O₄⁺ upon Fe-substitution, which is correctly predicted by multireference (MR) wave function calculations. Al₃O₄⁺ exhibits a cone-like structure with a central trivalent O atom (C_3v symmetry). The replacement of the Al- by an Fe atom leads to a planar bicyclic frame with a terminal Al-O^•- radical site, accompanied by a change from the Fe^+III/O^-II to the Fe^+II/O^-I valence state. The gas phase vibrational spectrum of Al₂FeO₄⁺ is exclusively reproduced by the latter structure, which MR wave function calculations correctly identify as the most stable isomer. This isomer of Al₂FeO₄⁺ is predicted to be highly reactive with respect to C-H bond activation, very similar to Al₈O₁₂⁺ which also features the terminal Al-O^•- radical site. Density functional theory, in contrast, predicts a less reactive Al₃O₄⁺-like "isomorphous substitution" structure of Al₂FeO₄⁺ to be the most stable one, except for functionals with very high admixture of Fock exchange (50%, BHLYP).

Unravelling the Enigma of Nonoxidative Conversion of Methane on Iron Single-Atom Catalysts

The direct, nonoxidative conversion of methane on a silica-confined single-atom iron catalyst is a landmark discovery in catalysis, but the proposed gas-phase reaction mechanism is still open to discussion. Here, we report a surface reaction mechanism by computational modeling and simulations. The activation of methane occurs at the single iron site, whereas the dissociated methyl disfavors desorption into gas phase under the reactive conditions. In contrast, the dissociated methyl prefers transferring to adjacent carbon sites of the active center (Fe₁ ©SiC₂ ), followed by C-C coupling and hydrogen transfer to produce the main product (ethylene) via a key -CH-CH₂ intermediate. We find a quasi Mars-van Krevelen (quasi-MvK) surface reaction mechanism involving extracting and refilling the surface carbon atoms for the nonoxidative conversion of methane on Fe₁ ©SiO₂ and this surface process is identified to be more plausible than the alternative gas-phase reaction mechanism.

Promoting Li/MgO Catalyst with Molybdenum Oxide for Oxidative Conversion of n-Hexane

In this work, molybdena-promoted Li/MgO is studied as a catalyst for the oxidative conversion of n-hexane. The structure of the catalysts is investigated with X-ray Diffraction (XRD) and Raman spectroscopy. The MoO3/Li/MgO catalyst contains three types of molybdena-containing species, the presence of which depend on molybdena loading. At low Mo/Li ratios (i) isolated dispersed [MoO4]2− anionic species are observed. At high Mo/Li ratios, the formation of crystalline lithium molybdate phases such as (ii) monomeric Li2MoO4 and tentatively (iii) polymeric Li2Mo4O13 are concluded. The presence of these lithium molybdates diminishes the formation of Li2CO3 in the catalyst. Subsequently, the catalyst maintains high surface area and stability with time-on-stream during oxidative conversion. Molybdena loading as low as 0.5 wt % is sufficient to induce these improvements, maintaining the non-redox characteristics of the catalyst, whereas higher loadings enhance deep oxidation and oxidative dehydrogenation reactions. Promoting a Li/MgO catalyst with 0.5 wt % MoO3 is thus efficient for selective conversion of n-hexane to alkenes, giving alkene yield up to 24% as well as good stability.

Catalytic activity, water formation, and sintering: Methane activation over Co- and Fe-doped MgO nanocrystals

Microstructure, structure, and compositional homogeneity of metal oxide nanoparticles can change dramatically during catalysis. Considering the different stabilities of cobalt and iron ions in the MgO host lattice [M. Niedermaier et al., J. Phys. Chem. C 123, 25991 (2019)], we employed MgO nanocube powders with or without transition metal admixtures for the oxidative coupling of methane (OCM) reaction to analyze characteristic differences in catalytic activity and sintering behavior. Undoped MgO nanocrystals exhibit the highest C₂ selectivity and retain the nanocrystallinity of the starting material after 24 h time on stream. For the Co-Mg-O nanoparticle powder, which exhibits the highest activity and CO_x selectivity and where OCM-induced coarsening is strongest, we found that the Co²⁺ ions remain homogeneously distributed over the MgO lattice. Trivalent Fe ions migrate to the surface of Fe-Mg-O nanoparticles where they form a magnesioferrite phase (MgFe₂O₄) with a characteristic impact on catalytic performance: Fe-Mg-O is initially less selective than MgO despite its lower activity. An increase in C₂ selectivity and a decrease in the CO₂/CO ratio with time on stream are attributed to the increasing fraction of coarsened particles that become depleted in redox active Fe. Surface water is a by-product of the OCM reaction, favors mass transport across the particle surfaces, and serves as a sintering aid during catalysis. The characteristic changes in size and morphology of MgO, Co-doped, and Fe-doped MgO particles can be consistently explained by activity and C₂ selectivity trends. The original morphology of the nanocubes as a starting material for the OCM reaction does not impact the catalytic activity.

Operando Photoelectron Photoion Coincidence Spectroscopy Unravels Mechanistic Fingerprints of Propane Activation by Catalytic Oxyhalogenation

Herein, we demonstrate operando photoelectron photoion coincidence (PEPICO) spectroscopy as a pivotal technique for evidencing unprecedented mechanistic insights by isomer-selective radical detection within complex hydrocarbon-functionalization reaction networks, such as those of catalyzed propane oxychlorination and oxybromination. In particular, while the oxychlorination is surface-confined, we show that in oxybromination alkane activation follows a gas-phase reaction mechanism with evolved bromine and bromine radicals, favoring 2-propyl over 1-propyl radical formation, as evidenced by isomer-selective threshold photoelectron analysis. Furthermore, we provide new mechanistic insights into the cracking and coking pathways that are observed in oxybromination. The first entails propargyl radical formation from consecutive hydrogen abstraction of propyl radicals, ultimately yielding benzene. The second originates from C-C bond cleavage in propane to ethyl and methyl radicals, which produce CH₄ and C₂H₄, or undergo chain-growth reactions, forming C₄-C₆ species.

Insight into the active site and reaction mechanism for selective oxidation of methane to methanol using H2O2 on a Rh1/ZrO2 catalyst

Five-coordinated Rh leads to the over-oxidation of CH₄, while four-coordinated Rh stabilizes CH₃ and facilitates methanol formation via the CH₃OOH intermediate.

Mechanism of selective and complete oxidation in La2O3-catalyzed oxidative coupling of methane

The catalytic mechanism and reaction network of oxidative coupling of methane over La₂O₃ are thoroughly investigated by density functional theory calculations.