Chemically orthogonal three-patch microparticles

Tricompartmental Microcarriers with Controlled Release for Efficient Management of Parkinson's Disease

Parkinson's is a progressive neurodegenerative disease of the nervous system. It has no cure, but its symptoms can be managed by supplying dopamine artificially to the brain.This work aims to engineer tricompartmental polymeric microcarriers by electrohydrodynamic cojetting technique to encapsulate three PD (Parkinson's disease) drugs incorporated with high encapsulation efficiency (∼100%) in a single carrier at a fixed drug ratio of 4:1:8 (Levodopa (LD): Carbidopa(CD): Entacapone (ENT)). Upon oral administration, the drug ratio needs to be maintained during subsequent release from microparticles to enhance the bioavailability of primary drug LD. This presents a notable challenge, as the three drugs vary in their aqueous solubility (LD > CD > ENT). The equilibrium of therapeutic release was achieved using a combination of FDA-approved polymers (PLA, PLGA, PCL, and PEG) and the disc shape of particles. In vitro studies demonstrated the simultaneous release of all the three therapeutics in a sustained and controlled manner. Additionally, pharmacodynamics and pharmacokinetics studies in Parkinson's disease rats induced by rotenone showed a remarkable improvement in PD conditions for the microparticles-fed rats, thereby showing a great promise toward efficient management of PD.

Dissipative particle dynamics simulation study on ATRP-brush modification of variably shaped surfaces and biopolymer adsorption

We present a dissipative particle dynamics (DPD) simulation study on the surface modification of initiator embedded microparticles (MPs) of different shapes via atom transfer radical polymerization (ATRP) brush growth. The surface-initiated ATRP-brush growth leads to the formation of a more globular MP shape. We perform the comparative analysis of ATRP-brush growth on three different forms of particle surfaces: cup surface, spherical surface, and flat surface (rectangular/disk-shaped). First, we establish the chemical kinetics of the brush growth: the monomer conversion and the reaction rates. Next, we discuss the structural changes (shape-modification) of brush-modified surfaces by computing the radial distribution function, spatial density distribution, radius of gyration, hydrodynamic radius, and shape factor. The polymer brush-modified particles are well known as the carrier materials for enzyme immobilization. Finally, we study the biopolymer adsorption on ATRP-brush modified particles in a compatible solution. In particular, we explore the effect of ATRP-brush length, biopolymer chain length, and concentration on the adsorption process. Our results illustrate the enhanced biopolymer adsorption with increased brush length, initiator concentration, and biopolymer concentration. Most importantly, when adsorption reaches saturation, the flat surface loads more biopolymers than the other two surfaces. The experimental results verified the same, considering the disk-shaped flat surface particles, cup-shaped particles, and spherical particles.

Protein Nanoparticles: Uniting the Power of Proteins with Engineering Design Approaches

Protein nanoparticles, PNPs, have played a long-standing role in food and industrial applications. More recently, their potential in nanomedicine has been more widely pursued. This review summarizes recent trends related to the preparation, application, and chemical construction of nanoparticles that use proteins as major building blocks. A particular focus has been given to emerging trends related to applications in nanomedicine, an area of research where PNPs are poised for major breakthroughs as drug delivery carriers, particle-based therapeutics or for non-viral gene therapy.

Recent advances in polymer scaffolds for biomedical applications

The review provides insights into current advancements in electrospinning-assisted manufacturing for optimally designing biomedical devices for their prospective applications in tissue engineering, wound healing, drug delivery, sensing, and enzyme immobilization, and others. Further, the evolution of electrospinning-based hybrid biomedical devices using a combined approach of 3 D printing and/or film casting/molding, to design dimensionally stable membranes/micro-nanofibrous assemblies/patches/porous surfaces, etc. is reported. The influence of various electrospinning parameters, polymeric material, testing environment, and other allied factors on the morphological and physico-mechanical properties of electrospun (nano-/micro-fibrous) mats (EMs) and fibrous assemblies have been compiled and critically discussed. The spectrum of operational research and statistical approaches that are now being adopted for efficient optimization of electrospinning process parameters so as to obtain the desired response (physical and structural attributes) has prospectively been looked into. Further, the present review summarizes some current limitations and future perspectives for modeling architecturally novel hybrid 3 D/selectively textured structural assemblies, such as biocompatible, non-toxic, and bioresorbable mats/scaffolds/membranes/patches with apt mechanical stability, as biological substrates for various regenerative and non-regenerative therapeutic devices.

Facile Fabrication of Anisotropic Multicompartmental Microfibers Using Charge Reversal Electrohydrodynamic Co-Jetting

Anisotropic microstructures are utilized in various fields owing to their unique properties, such as reversible shape transitions or on-demand and sequential release of drug combinations. In this study, anisotropic multicompartmental microfibers composed of different polymers are prepared via charge reversal electrohydrodynamic (EHD) co-jetting. The combination of various polymers, such as thermoplastic polyurethane, poly(D,L-lactide-co-glycolide), poly(vinyl cinnamate), and poly(methyl methacrylate), results in microfibers with distinct compositional boundaries. Charge reversal during EHD co-jetting enables facile fabrication of multicompartmental microfibers with the desired composition and tunable inner architecture, broadening their spectrum of potential applications, such as functional microfibers and cell scaffolds with multiple physical and chemical properties.

Multidimensional Anisotropic Architectures on Polymeric Microparticles

Next generation life science technologies will require the integration of building blocks with tunable physical and chemical architectures at the microscale. A central issue is to govern the multidimensional anisotropic space that defines these microparticle attributes. However, this control is limited to one or few dimensions due to profound fabrication tradeoffs, a problem that is exacerbated by miniaturization. Here, a vast number of anisotropic dimensions are integrated combining SU-8 photolithography with (bio)chemical modifications via soft-lithography. Microparticles in a 15-D anisotropic space are demonstrated, covering branching, faceting, fiducial, topography, size, aspect ratio, stiffness, (bio)molecular and quantum dot printing, top/bottom surface coverage, and quasi-0D, 1D, 2D, and 3D surface patterning. The strategy permits controlled miniaturization on physical dimensions below 1 µm and molecular patterns below 1 µm² . By combining building blocks, anisotropic microparticles detect pH changes, form the basis for a DNA-assay recognition platform, and obtain an extraordinary volumetric barcoding density up to 1093 codes µm^-3 in a 3 × 12 × 0.5 µm³ volume.

Electrokinetic characterization of synthetic protein nanoparticles

The application of nanoparticle in medicine is promising for the treatment of a wide variety of diseases. However, the slow progress in the field has resulted in relatively few therapies being translated into the clinic. Anisotropic synthetic protein nanoparticles (ASPNPs) show potential as a next-generation drug-delivery technology, due to their biocompatibility, biodegradability, and functionality. Even though ASPNPs have the potential to be used in a variety of applications, such as in the treatment of glioblastoma, there is currently no high-throughput technology for the processing of these particles. Insulator-based electrokinetics employ microfluidics devices that rely on electrokinetic principles to manipulate micro- and nanoparticles. These miniaturized devices can selectively trap and enrich nanoparticles based on their material characteristics, and subsequently release them, which allows for particle sorting and processing. In this study, we use insulator-based electrokinetic (EK) microdevices to characterize ASPNPs. We found that anisotropy strongly influences electrokinetic particle behavior by comparing compositionally identical anisotropic and non-anisotropic SPNPs. Additionally, we were able to estimate the empirical electrokinetic equilibrium parameter (eE EEC) for all SPNPs. This particle-dependent parameter can allow for the design of various separation and purification processes. These results show how promising the insulator-based EK microdevices are for the analysis and purification of clinically relevant SPNPs.

Multifunctional Synthetic Protein Nanoparticles via Reactive Electrojetting

Protein nanoparticles are a promising approach for nanotherapeutics, as proteins combine versatile chemical and biological function with controlled biodegradability. In this work, the development of an adaptable synthesis method is presented for synthetic protein nanoparticles (SPNPs) based on reactive electrojetting. In contrast to past work with electrohydrodynamic cojetting using inert polymers, the jetting solutions are comprised of proteins and chemically activated macromers, designed to react with each other during the processing step, to form insoluble nanogel particles. SPNPs made from a variety of different proteins, such as transferrin, insulin, or hemoglobin, are stable and uniform under physiological conditions and maintain monodisperse sizes of around 200 nm. SPNPs comprised of transferrin and a disulfide containing macromer are stimuli-responsive, and serve as markers of oxidative stress within HeLa cells. Beyond isotropic SPNPs, bicompartmental nanoparticles containing human serum albumin and transferrin in two distinct hemispheres are prepared via reactive electrojetting. This novel platform provides access to a novel class of versatile protein particles with nanoscale architectures that i) can be made from a variety of proteins and macromers, ii) have tunable biological responses, and iii) can be multicompartmental, a prerequisite for controlled release of multiple drugs.

Anisotropic Nano-/Microparticles from Diversified Copolymers by Solvent-Mediated Self-Assembly

Effective synthesis of anisotropic nano-/microparticles (APs) by the copolymers is of great significance in nanomaterials and nanotechnology. However, achieving regulation of the morphology, composition, property, and particle size of anisotropic nano-/microparticles (APs) with diversified copolymers is difficult due to complex mechanism and formation conditions. In this work, a versatile one-pot solvent-mediated self-assembly (SmSa) strategy had been proposed for the facile one-pot synthesis of shape-tunable anisotropic nano-/microparticles (StAPs). In addition, the formation mechanism of StAPs was determined through numerous characterization methods related to morphology and element distribution. The results revealed that the anisotropic architectures of StAPs were closely related to the nature of poly(methylacrylic acid-methyl methacrylate-butyl acrylate) (L₁) and poly(butyl acrylate-styrene) (L₂) polymer chains imparted by polymer blocks of different domains. Therefore, the ordered assembly of the rigid and hydrophobic L₂ polymer chains in micelles consisting of the flexible and amphiphilic L₁ and solvent could be successfully carried out under the mediation of increasing solvent polarity and the strong adsorption of poly(vinylpyrrolidone) for L₂. Furthermore, the developed versatile SmSa strategy and the obtained StAPs play an essential role in the development of nanoscience and nanotechnology. Particularly given its adjustable emulsifying properties at different pH values, as well as numerous sites for further modification by fluorescent or other components, it can be employed to synthesize a wide range of functional materials.

Bifunctional Janus Spheres with Chemically Orthogonal Patches

Bifunctional Janus particles with patches carrying orthogonal surface functionalities that can be independently modified are widely seen as promising building blocks for the bottom-up assembly of functional materials due to their full compositional and geometrical programmability. However, synthesis of these colloids remains an elusive task as current scalable procedures are generally limited to monofunctional particles only. Herein, a scalable bulk wet-chemical synthetic method for fabricating bifunctional Janus particles following a two-step dispersion polymerization is developed. Patch formation on these colloids is driven by the spontaneous phase separation between a brominated outer shell and poly(propargyl acrylate) (p(PA)), formed after the seed particles were swollen with the corresponding monomer. The size ratio between the two patches is readily tunable by controlling the volumetric ratio between the feeding monomers. The distinct patches of these Janus particles carry chemical handles facilitating independent and orthogonal surface modification using Atom Transfer Radical Polymerization (ATRP) and thiol-yne Click chemistry for the brominated and alkyne-containing patches, respectively. The presented route toward bifunctional patchy spheres provides a versatile starting point for the development of bifunctional colloidal particles with tailored directional properties.

Compartmentalized Microhelices Prepared via Electrohydrodynamic Cojetting

Anisotropically compartmentalized microparticles have attracted increasing interest in areas ranging from sensing, drug delivery, and catalysis to microactuators. Herein, a facile method is reported for the preparation of helically decorated microbuilding blocks, using a modified electrohydrodynamic cojetting method. Bicompartmental microfibers are twisted in situ, during electrojetting, resulting in helical microfibers. Subsequent cryosectioning of aligned fiber bundles provides access to helically decorated microcylinders. The unique helical structure endows the microfibers/microcylinders with several novel functions such as translational motion in response to rotating magnetic fields. Finally, microspheres with helically patterned compartments are obtained after interfacially driven shape shifting of helically decorated microcylinders.

Progress of Multicompartmental Particles for Medical Applications

Particulate materials are becoming increasingly used in the literature for medical applications, but translation to the clinical setting has remained challenging as many particle systems face challenges from in vivo barriers. Multicompartmental particles that can incorporate several materials in an individual particle may allow for more intricate control and addressing of issues that otherwise standard particles are unable to. Here, some of the advances made in the use of multicompartmental particles for medical applications are briefly described.

Multiplex Analysis on a Single Porous Hydrogel Bead with Encoded SERS Nanotags

Bead-based assays have drawn more and more attention in biomedical fields. Herein, we proposed a novel approach to achieve multiplex analysis on a single porous hydrogel bead (PHB) with Raman dyes (RDs) encoded core-shell surface-enhanced Raman scattering (SERS) nanotags. Because of the amplified signal of RDs by core-shell metal structure of the nanotag and the high surface area to volume ratio (SVR) of the PHB, the sensitivity and linear dynamic range (LDR) of the as-proposed multiplex analysis method are significantly improved. We anticipate this approach to be widely used in the multiplex assays and biosensors.

Recent advances in engineering microparticles and their nascent utilization in biomedical delivery and diagnostic applications

Complex microparticles (MPs) bearing unique characteristics such as well-tailored sizes, various morphologies, and multi-compartments have been attempted to be produced by many researchers in the past decades. However, a conventionally used method of fabricating MPs, emulsion polymerization, has a limitation in achieving the aforementioned characteristics and several approaches such as the microfluidics-assisted (droplet-based microfluidics and flow lithography-based microfluidics), electrohydrodynamics (EHD)-based, centrifugation-based, and template-based methods have been recently suggested to overcome this limitation. The outstanding features of complex MPs engineered through these suggested methods have provided new opportunities for MPs to be applied in a wider range of applications including cell carriers, drug delivery agents, active pigments for display, microsensors, interface stabilizers, and catalyst substrates. Overall, the engineered MPs expose their potential particularly in the field of biomedical engineering as the increased complexity in the engineered MPs fulfills well the requirements of the high-end applications. This review outlines the current trends of newly developed techniques used for engineered MPs fabrication and focuses on the current state of engineered MPs in biomedical applications.

Long-circulating Janus nanoparticles made by electrohydrodynamic co-jetting for systemic drug delivery applications

BACKGROUND

Nanoparticles with controlled physical properties have been widely used for controlled release applications. In addition to shape, the anisotropic nature of the particles can be an important design criterion to ensure selective surface modification or independent release of combinations of drugs.

PURPOSE

Electrohydrodynamic (EHD) co-jetting is used for the fabrication of uniform anisotropic nanoparticles with individual compartments and initial physicochemical and biological characterization is reported.

METHODS

EHD co-jetting is used to create nanoparticles, which are characterized at each stage with scanning electron microscopy (SEM), structured illumination microscopy (SIM), dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA). Surface immobilization techniques are used to incorporate polyethylene glycol (PEG) and I(125) radiolabels into the nanoparticles. Particles are injected in mice and the particle distribution after 1, 4 and 24 hours is assessed.

RESULTS AND DISCUSSION

Nanoparticles with an average diameter of 105.7 nm are prepared by EHD co-jetting. The particles contain functional chemical groups for further surface modification and radiolabeling. The density of PEG molecules attached to the surface of nanoparticles is determined to range between 0.02 and 6.04 ligands per square nanometer. A significant fraction of the nanoparticles (1.2% injected dose per mass of organ) circulates in the blood after 24 h.

CONCLUSION

EHD co-jetting is a versatile method for the fabrication of nanoparticles for drug delivery. Circulation of the nanoparticles for 24 h is a pre-requisite for subsequent studies to explore defined targeting of the nanoparticles to a specific anatomic site.

Integrated fabrication-conjugation methods for polymeric and hybrid microparticles for programmable drug delivery and biosensing applications

Functionalized polymeric microparticles possess significant potential for controlled drug delivery and biosensing applications, yet current fabrication techniques face challenges in simple and scalable fabrication and biofunctionalization. For programmable manufacture of biofunctional microparticles in a simple manner, we have developed robust micromolding methods combined with biopolymeric conjugation handles and bioorthogonal click reactions. In this focused minireview, we present detailed methods for our integrated approaches for fabrication of microparticles with controlled 2D and 3D shapes and dimensions toward controlled release, and for biomacromolecular conjugation via strain promoted alkyne-azide cycloaddition (SPAAC) and tetrazine-trans-cyclooctene (Tz-TCO) ligation reactions utilizing a potent aminopolysaccharide chitosan as an efficient conjugation handle. We believe that the fabrication-conjugation methods reported here from a range of our recent reports illustrate the simple, robust and readily reproducible nature of our approaches to creating multifaceted microparticles in a programmable, cost-efficient and scalable manner toward a wide range of medical and biotechnological application areas.

Janus particles for biological imaging and sensing

Janus particles, named after the two-faced Roman god Janus, have different surface makeups, structures or compartments on two sides. This review highlights recent advances in employing Janus particles as novel analytical tools for live cell imaging and biosensing. Unlike conventional particles used in analytical science, two-faced Janus particles provide asymmetry and directionality, and can combine different or even incompatible properties within a single particle. The broken symmetry enables imaging and quantification of rotational dynamics, revealing information beyond what traditional measurements offer. The spatial segregation of molecules on the surface of a single particle also allows analytical functions that would otherwise interfere with each other to be decoupled, opening up opportunities for novel multimodal analytical methods. We summarize here the development of Janus particles, a few general methods for their fabrication and, more importantly, the emerging and novel applications of Janus particles as multi-functional imaging probes and sensors.

Engineering of nanoparticle size via electrohydrodynamic jetting

Engineering the physical properties of particles, especially their size, is an important parameter in the fabrication of successful carrier systems for the delivery of therapeutics. Here, various routes were explored for the fabrication of particles in the nanosize regime. It was demonstrated that the use of a charged species and/or solvent with high dielectric constant can influence the size and distribution of particles, with the charged species having a greater effect on the size of the particles and the solvent a greater effect on the distribution of the particles. In addition to the fabrication of nanoparticles, their fractionation into specific size ranges using centrifugation was also investigated. The in vitro particle uptake and intracellular transport of these nanoparticles was studied as a function of size and incubation period. The highest level of intralysosomal localization was observed for the smallest nanoparticle group (average of 174 nm), followed by the groups with increasing sizes (averages of 378 and 575 nm), most likely due to the faster endosomal uptake of smaller particles. In addition, the internalization of nanoparticle clusters and number of nanoparticles per cell increased with longer incubation periods. This work establishes a technological approach to compartmentalized nanoparticles with defined sizes. This is especially important as relatively subtle differences in size can modulate cell uptake and determine intercellular fate. Future work will need to address the role of specific targeting ligands on cellular uptake and intracellular transport of compartmentalized nanoparticles.

Suspended Planar-Array Chips for Molecular Multiplexing at the Microscale

A novel suspended planar-array chips technology is described, which effectively allows molecular multiplexing using a single suspended chip to analyze extraordinarily small volumes. The suspended chips are fabricated by combining silicon-based technology and polymer-pen lithography, obtaining increased molecular pattern flexibility, and improving miniaturization and parallel production. The chip miniaturization is so dramatic that it permits the intracellular analysis of living cells.

Impressed pressure-facilitated seeded emulsion polymerization: design of fast swelling strategies for massive fabrication of patchy microparticles

High-pressure and ultrasound swelling polymerization promote the fast and large-scale fabrication of patchy particles for potential applications.

CXCR4-Targeted Nanocarriers for Triple Negative Breast Cancers

CXCR4 is a cell membrane receptor that is overexpressed in triple-negative breast cancers and implicated in growth and metastasis of this disease. Using electrohydrodynamic cojetting, we prepared multicompartmental drug delivery carriers for CXCR4 targeting. The particles are comprised of a novel poly(lactide-co-glycolide) derivative that allows for straightforward immobilization of 1,1'-[1,4-phenylenebis(methylene)]bis[1,4,8,11-tetraazacyclotetradecane] (Plerixafor), a small molecule with affinity for CXCR4. Targeted nanocarriers are selectively taken up by CXCR4-expressing cells and effectively block CXCR4 signaling. This study suggests that CXCR4 may be an effective target for nanocarrier-based therapies.

Cardiomyocyte-Driven Actuation in Biohybrid Microcylinders

Biohybrid microcylinders are fabricated using electrohydrodynamic cojetting followed by a surface chemistry approach to maximize cell-adhesive characteristics. As proper cell alignment and mechanical stiffness are important components of bioactuator design, spatial cell selectivity and stress/strain properties of microcylinders are characterized to demonstrate their capability of response to rat cardio-myocyte contraction. These microcylinders can find applications in a host of micromechanical systems.

Direct Aqueous Self-Assembly of an Amphiphilic Diblock Copolymer toward Multistimuli-Responsive Fluorescent Anisotropic Micelles

It is extremely important for emerging applications and still enormously challenging to develop multifunctional stimuli-responsive anisotropic polymeric micelles with integration of potentially targeted therapeutic and diagnostic function. Herein, we report a first example of fluorescent anisotropic micelles (FAMs) with Fe(3+), DTT, H2O2, and thermal responsive fluorescence and morphology. FAMs from direct aqueous self-assembly of amphiphilic diblock copolymer showed reversible "switch off/on" of aqua fluorescent emission and controllable structural change by sequential addition of Fe(3+) and DTT. In addition, the FAMs had reversible dual-thermal responsiveness of fluorescence and morphology. This micelle could serve as a promising candidate for all-in-one application of quantitative detecting, imaging, drug delivery, and targeted release.