Visual displays that directly interface and provide read-outs of molecular states via molecular graphics processing units

Paper-based multiplex biosensors for inexpensive healthcare diagnostics: a comprehensive review

Multiplex detection is a smart and an emerging approach in point-of-care testing as it reduces analysis time and testing cost by detecting multiple analytes or biomarkers simultaneously which are crucial for disease detection at an early stage. Application of inexpensive substrate such as paper has immense potential and matter of research interest in the area of point of care testing for multiplexed analysis as it possesses several unique advantages. This study presents the use of paper, strategies adopted to refine the design created on paper and lateral flow strips to enhance the signal, increase the sensitivity and specificity of multiplexed biosensors. An overview of different multiplexed detection studies performed using biological samples has also been reviewed along with the challenges and advantages offered by multiplexed analysis.

Encoding, Decoding, and Rendering Information in DNA Nanoswitch Libraries

DNA-based construction allows the creation of molecular devices that are useful in information storage and processing. Here, we combine the programmability of DNA nanoswitches and stimuli-responsive conformational changes to demonstrate information encoding and graphical readout using gel electrophoresis. We encoded information as 5-bit binary codes for alphanumeric characters using a combination of DNA and RNA inputs that can be decoded using molecular stimuli such as a ribonuclease. We also show that a similar strategy can be used for graphical visual readout of alphabets on an agarose gel, information that is encoded by nucleic acids and decoded by a ribonuclease. Our method of information encoding and processing could be combined with DNA actuation for molecular computation and diagnostics that require a nonarbitrary visual readout.

Research Progress in Construction and Application of Enzyme-Based DNA Logic Gates

As a research hotspot in the field of information processing, DNA computing exhibits several important underlying characteristics-from parallel computing and low energy consumption to high-performance storage capabilities-thereby enabling its wide application in nanomachines, molecular encryption, biological detection, medical diagnosis, etc. Based on DNA computing, the most rapidly developed field focuses on DNA molecular logic-gates computing. In particular, the recent advances in enzyme-based DNA logic gates has emerged as ideal materials for constructing DNA logic gates. In this review, we explore protein enzymes that can manipulate DNA, especially, nicking enzymes and polymerases with high efficiency and specificity, which are widely used in constructing DNA logic gates, as well as ribozyme that can construct DNA logic gates following various mechanism with distinct biomaterials. Accordingly, the review highlights the characteristics and applications of various types of DNAzyme-based logic gates models, considering their future developments in information, biomedicine, chemistry, and computers.

A modular XNAzyme cleaves long, structured RNAs under physiological conditions and enables allele-specific gene silencing

Nucleic-acid catalysts (ribozymes, DNA- and XNAzymes) cleave target (m)RNAs with high specificity but have shown limited efficacy in clinical applications. Here we report on the in vitro evolution and engineering of a highly specific modular RNA endonuclease XNAzyme, FR6_1, composed of 2'-deoxy-2'-fluoro-β-D-arabino nucleic acid (FANA). FR6_1 overcomes the activity limitations of previous DNA- and XNAzymes and can be retargeted to cleave highly structured full-length (>5 kb) BRAF and KRAS mRNAs at physiological Mg2+ concentrations with allelic selectivity for tumour-associated (BRAF V600E and KRAS G12D) mutations. Phosphorothioate-FANA modification enhances FR6_1 biostability and enables rapid KRAS mRNA knockdown in cultured human adenocarcinoma cells with a G12D-allele-specific component provided by in vivo XNAzyme cleavage activity. These results provide a starting point for the development of improved gene-silencing agents based on FANA or other XNA chemistries.

A Chemically Fuelled Molecular Automaton Displaying Programmed Migration of Zn2+ Between Alternative Binding Sites

A molecular system comprising a cationic zinc complex and an amino acid-derived ambident ligand having phosphate and carboxylate binding sites undergoes a series of rearrangements in which the metal cation migrates autonomously from one site to another. The location of the metal is identified by the circular dichroism spectrum of a ligated bis(2-quinolylmethyl)-(2-pyridylmethyl)amine (BQPA) chromophore, which takes a characteristic shape at each binding site. Migration is fuelled by the decomposition of trichloroacetic acid to CO2 and CHCl3 , which progressively neutralises the acidity of the system as a function of time, revealing in sequence binding sites of increasing basicity. The migration rate responds to control by variation of the temperature, water content and triethylamine concentration, while an excess of fuel controls the duration of an induction period before the migration event.

Complexing deoxyribozymes with RNA aptamers for detection of the small molecule theophylline

Biointegrative information processing systems offer a great advantage to autonomous biodevices, as their capacity for biological computation provides the ability to sense the state of more complex environments and better integrate with downstream biological regulation systems. Deoxyribozymes (DNAzymes) and aptamers are of interest to such computational biosensing systems due to the enzymatic properties of DNAzymes and the ligand-inducible conformational structures of aptamers. Herein, we describe a novel method for providing ligand-responsive allosteric control to a DNAzyme using an RNA aptamer. We designed a NOT-logic-compliant E6 DNAzyme to be complementary to an RNA aptamer targeting theophylline, such that the aptamer competitively interacted with either theophylline or the DNAzyme, and disabled the DNAzyme only when theophylline concentration was below a given threshold. Out of our seven designed "complexing aptazymes," three demonstrated effective theophylline-responsive allosteric regulation (2.84 ± 3.75%, 4.97 ± 2.92%, and 8.91 ± 4.19% activity in the absence of theophylline; 46.29 ± 3.36%, 50.70 ± 10.15%, and 61.26 ± 6.18% activity in the presence of theophylline). Moreover, the same three complexing aptazymes also demonstrated the ability to semi-quantitatively determine the concentration of theophylline present in solution, successfully discriminating between therapeutically ineffective (<20 μM), safe (20-100 μM), and toxic (>100 μM) theophylline concentrations. Our method of using an RNA aptamer for ligand-responsive allosteric control of a DNAzyme expands the way aptamers can be configured for biosensing, and suggests a pathway for embedding DNAzymes to provide enhanced information processing and control of biological systems.

Recent Advances in Noninvasive Biosensors for Forensics, Biometrics, and Cybersecurity

Recently, biosensors have been used in an increasing number of different fields and disciplines due to their wide applicability, reproducibility, and selectivity. Three large disciplines in which this has become relevant has been the forensic, biometric, and cybersecurity fields. The call for novel noninvasive biosensors for these three applications has been a focus of research in these fields. Recent advances in these three areas has relied on the use of biosensors based on primarily colorimetric assays based on bioaffinity interactions utilizing enzymatic assays. In forensics, the use of different bodily fluids for metabolite analysis provides an alternative to the use of DNA to avoid the backlog that is currently the main issue with DNA analysis by providing worthwhile information about the originator. In biometrics, the use of sweat-based systems for user authentication has been developed as a proof-of-concept design utilizing the levels of different metabolites found in sweat. Lastly, biosensor assays have been developed as a proof-of-concept for combination with cybersecurity, primarily cryptography, for the encryption and protection of data and messages.

Processing DNA-Based Molecular Signals into Graphical Displays

DNA is now well-established as a nanoscale building material with applications in fields such as biosensing and molecular computation. Molecular processes such as logic gates, nucleic acid circuits, and multiplexed detection have used different readout strategies to measure the output signal. In biosensing, this output can be the diagnosis of a disease biomarker, whereas in molecular computation, the output can be the result of a mathematical operation carried out using DNA. Recent developments have shown that the output of such processes can be displayed graphically as a macroscopic symbol or an alphanumeric character on multiwell plates, microarray chips, gels, lateral flow devices, and DNA origami surfaces. This review discusses the concepts behind such graphical readouts of molecular events, available display platforms, and the advantages and challenges in adapting such methods for practical use. Graphical display systems have the potential to be used in the creation of intelligent computing and sensing devices by which nanoscale binding events are translated into macroscopic visual readouts.

Constructing Controllable Logic Circuits Based on DNAzyme Activity

Recently, DNA molecules have been widely used to construct advanced logic devices due to their unique properties, such as a simple structure and predictable behavior. In fact, there are still many challenges in the process of building logic circuits. Among them, the scalability of the logic circuit and the elimination of the crosstalk of the cascade circuit have become the focus of research. Inspired by biological allosteric regulation, we developed a controllable molecular logic circuit strategy based on the activity of DNAzyme. The E6 DNAzyme sequence was temporarily blocked by hairpin DNA and activated under appropriate input trigger conditions. Using a substrate with ribonucleobase (rA) modification as the detection strand, a series of binary basic logic gates (YES, AND, and INHIBIT) were implemented on the computational component platform. At the same time, we demonstrate a parallel demultiplexer and two multi-level cascade circuits (YES-YES and YES-Three input AND (YES-TAND)). In addition, the leakage of the cascade process was reduced by exploring factors such as concentration and DNA structure. The proposed DNAzyme activity regulation strategy provides great potential for the expansion of logic circuits in the future.

Repeated Reuse of Deoxyribozyme-Based Logic Gates

Deoxyribozymes (DNAzymes) have demonstrated a significant capacity for biocomputing and hold promise for information processing within advanced biological devices if several key capabilities are developed. One required capability is reuse-having DNAzyme logic gates be cyclically, and controllably, activated and deactivated. We designed an oligonucleotide-based system for DNAzyme reuse that could (1) remove previously bound inputs by addition of complementary oligonucleotides via toe-hold mediated binding and (2) diminish output signal through the addition of quencher-labeled oligonucleotides complementary to the fluorophore-bound substrate. Our system demonstrated, for the first time, the ability for DNAzymes to have their activity toggled, with activity returning to 90-125% of original activity. This toggling could be performed multiple times with control being exerted over when the toggling occurs, with three clear cycles observed before the variability in activity became too great. Our data also demonstrated that fluorescent output of the DNAzyme activity could be actively removed and regenerated. This reuse system can increase the efficiency of DNAzyme-based logic circuits by reducing the number of redundant oligonucleotides and is critical for future development of reusable biodevices controlled by logical operations.

Multiplex Detection of Nucleic Acids Using Recombinase Polymerase Amplification and a Molecular Colorimetric 7-Segment Display

Nucleic acid analysis has become highly relevant for point-of-care (POC) diagnostics since the advent of isothermal amplification methods that do not require thermal cycling. In particular, recombinase polymerase amplification (RPA) combined with lateral flow detection offers a rapid and simple solution for field-amenable low-resource nucleic acid testing. Expanding POC nucleic acid tests for the detection of multiple analytes is vital to improve diagnostic efficiency because increased multiplexing capacity enables higher information density combined with reduced assay time and costs. Here, we investigate expanding RPA POC detection by identifying a generic multiplex RPA format that can be combined with a generic multiplex lateral flow device (LFD) to enable binary and molecular encoding for the compaction of diagnostic data. This new technology relies on the incorporation of molecular labels to differentiate nucleic acid species spatially on a lateral flow membrane. In particular, we identified additional five molecular labels that can be incorporated during the RPA reaction for subsequent coupling with LFD detection. Combined with two previously demonstrated successful labels, we demonstrate potential to enable hepta-plex detection of RPA reactions coupled to multiplex LFD detection. When this hepta-plex detection is combined with binary and molecular encoding, an intuitive 7-segment output display can be produced. We note that in all experiments, we used an identical DNA template, except for the 5' label on the forward primer, to eliminate any effects of nucleic acid sequence amplification bias. Our proof-of-concept technology demonstration is highly relevant for developing information-compact POC diagnostics where space and time are premium commodities.

Symmetric-Key Encryption Based on Bioaffinity Interactions

The research presented here shows a bridge between biochemistry and cryptography. Enzyme-based assays were used in a new methodology linked to ciphers and cipher systems. Three separate enzyme assays, alkaline phosphatase (ALP) (E.C. 3.1.3.1), lysozyme (E.C. 3.2.1.17), and horseradish peroxidase (HRP) (E.C. 1.11.1.7), were used to create a cipher key in order to encrypt a message. By choosing certain parameters for one's experiment that are performed in the same way as a person receiving the message, correct encryption and decryption keys would be produced, resulting in a correct encryption and decryption of a message. It is imperative that both parties perform the same experiment under the same conditions in order to correctly interpret the message. Bioaffinity-based assays, in particular enzymatic assays, provide a specific, yet flexible mechanism to use for the encryption of messages. Because of the nature of this process there are a multitude of sets of parameters that may be chosen, each of which would result in a different key being produced, heightening the security and the robustness of the method. This paper shows that by using this concept of forming encryption keys using a bioaffinity-based approach, one is able to properly encrypt and decrypt a message, which could be viable for other biochemically based techniques.

Ebolavirus diagnosis made simple, comparable and faster than molecular detection methods: preparing for the future

Background

The 2014/2015 Ebolavirus outbreak resulted in more than 28,000 cases and 11,323 reported deaths, as of March 2016. Domestic transmission of the Guinea strain associated with the outbreak occurred mainly in six African countries, and international transmission was reported in four countries. Outbreak management was limited by the inability to rapidly diagnose infected cases. A further fifteen countries in Africa are predicted to be at risk of Ebolavirus outbreaks in the future as a consequence of climate change and urbanization. Early detection of cases and reduction of transmission rates is critical to prevent and manage future severe outbreaks. We designed a rapid assay for detection of Ebolavirus using recombinase polymerase amplification, a rapid isothermal amplification technology that can be combined with portable lateral flow detection technology. The developed rapid assay operates in 30 min and was comparable with real-time TaqMan™ PCR.

Methods

Designed, screened, selected and optimized oligonucleotides using the NP coding region from Ebola Zaire virus (Guinea strain). We determined the analytical sensitivity of our Ebola rapid molecular test by testing selected primers and probe with tenfold serial dilutions (1.34 × 10¹⁰⁻ 1.34 × 10¹ copies/μL) of cloned NP gene from Mayinga strain of Zaire ebolavirus in pCAGGS vector, and serially diluted cultured Ebolavirus as established by real-time TaqMan™ PCR that was performed using ABI7500 in Fast Mode. We tested extracted and reverse transcribed RNA from cultured Zaire ebolavirus strains – Mayinga, Gueckedou C05, Gueckedou C07, Makona, Kissidougou and Kiwit. We determined the analytical specificity of our assay with related viruses: Marburg, Ebola Reston and Ebola Sudan. We further tested for Dengue virus 1–4, Plasmodium falciparum and West Nile Virus (Kunjin strain).

Results

The assay had a detection limit of 134 copies per μL of plasmid containing the NP gene of Ebolavirus Mayinga, and cultured Ebolavirus and was highly specific for the Zaire ebolavirus species, including the Guinea strain responsible for the 2014/2015 outbreak. The assay did not detect related viruses like Marburg, Reston, or Sudan viruses, and other pathogens likely to be isolated from clinical samples.

Conclusions

Our assay could be suitable for implementation in district and primary health laboratories, as only a heating block and centrifuge is required for operation. The technique could provide a pathway for rapid screening of patients and animals for improved management of outbreaks.

Multicomponent reactions provide key molecules for secret communication

A convenient and inherently more secure communication channel for encoding messages via specifically designed molecular keys is introduced by combining advanced encryption standard cryptography with molecular steganography. The necessary molecular keys require large structural diversity, thus suggesting the application of multicomponent reactions. Herein, the Ugi four-component reaction of perfluorinated acids is utilized to establish an exemplary database consisting of 130 commercially available components. Considering all permutations, this combinatorial approach can unambiguously provide 500,000 molecular keys in only one synthetic procedure per key. The molecular keys are transferred nondigitally and concealed by either adsorption onto paper, coffee, tea or sugar as well as by dissolution in a perfume or in blood. Re-isolation and purification from these disguises is simplified by the perfluorinated sidechains of the molecular keys. High resolution tandem mass spectrometry can unequivocally determine the molecular structure and thus the identity of the key for a subsequent decryption of an encoded message.

Alphanumerical Visual Display Made of DNA Logic Gates for Drug Susceptibility Testing of Pathogens

Molecular diagnostics of drug-resistant pathogens require the analysis of point mutations in bacterial or viral genomes, which is usually performed by trained professionals and/or by sophisticated computer algorithms. We have developed a DNA-based logic system that autonomously analyzes mutations found in the genome of Mycobacterium tuberculosis complex (MTC) bacteria and communicates the output to a human user as alphanumeric characters read by the naked eye. The five-gate system displays "O" ("no infection") for the absence of MTC infection and "P" or "F" for passing or failing a drug-susceptibility test, respectively.

Addressable configurations of DNA nanostructures for rewritable memory

DNA serves as nature's information storage molecule, and has been the primary focus of engineered systems for biological computing and data storage. Here we combine recent efforts in DNA self-assembly and toehold-mediated strand displacement to develop a rewritable multi-bit DNA memory system. The system operates by encoding information in distinct and reversible conformations of a DNA nanoswitch and decoding by gel electrophoresis. We demonstrate a 5-bit system capable of writing, erasing, and rewriting binary representations of alphanumeric symbols, as well as compatibility with 'OR' and 'AND' logic operations. Our strategy is simple to implement, requiring only a single mixing step at room temperature for each operation and standard gel electrophoresis to read the data. We envision such systems could find use in covert product labeling and barcoding, as well as secure messaging and authentication when combined with previously developed encryption strategies. Ultimately, this type of memory has exciting potential in biomedical sciences as data storage can be coupled to sensing of biological molecules.

Liquid-to-gel transition for visual and tactile detection of biological analytes

So far all visual and instrument-free methods have been based on a color change. However, colorimetric assays cannot be used by blind or color-blind people. Here we introduce a liquid-to-gel transition as a general output platform. The signal output (a piece of gel) can be unambiguously distinguished from liquid both visually and by touch. This approach promises to contribute to the development of an accessible environment for visually impaired persons.

A mutation-resistant deoxyribozyme OR gate for highly selective detection of viral nucleic acids

Highly selective probes hybridize only to fully complementary DNA or RNA sequences and, therefore, often fail to recognize mutated viral genomes. Here we designed a probe that possesses two seemingly incompatible properties: it tolerates some point mutations in genome, while it remains selective towards others. An OR deoxyribozyme logic gate was designed to fluorescently report the sequences of enterovirus 71 (EV71) covering ∼90% of all known EV71 strains. Importantly, sequences of closely related coxsackieviruses that differed by single nucleotides were reliably differentiated in 7 out of 8 cases.

Synthetic Biology Provides a Toehold in the Fight against Zika

The World Health Organization has identified the development of a rapid point-of-care diagnostic test for Zika virus as a top research priority. In a recent Cell paper, Pardee et al. (2016) have exploited recent advances in synthetic biology and molecular engineering to deliver a sensitive, affordable, and field-ready Zika test.

A DNA Logic Gate Automaton for Detection of Rabies and Other Lyssaviruses

Immediate activation of biosensors is not always desirable, particularly if activation is due to non-specific interactions. Here we demonstrate the use of deoxyribozyme-based logic gate networks arranged into visual displays to precisely control activation of biosensors, and demonstrate a prototype molecular automaton able to discriminate between seven different genotypes of Lyssaviruses, including Rabies virus. The device uses novel mixed-base logic gates to enable detection of the large diversity of Lyssavirus sequence populations, while an ANDNOT logic gate prevents non-specific activation across genotypes. The resultant device provides a user-friendly digital-like, but molecule-powered, dot-matrix text output for unequivocal results read-out that is highly relevant for point of care applications.

DNA Computing Systems Activated by Electrochemically-triggered DNA Release from a Polymer-brush-modified Electrode Array

An array of four independently wired indium tin oxide (ITO) electrodes was used for electrochemically stimulated DNA release and activation of DNA-based Identity, AND and XOR logic gates. Single-stranded DNA molecules were loaded on the mixed poly(N,N-di-methylaminoethyl methacrylate) (PDMAEMA)/poly-(methacrylic acid) (PMAA) brush covalently attached to the ITO electrodes. The DNA deposition was performed at pH 5.0 when the polymer brush is positively charged due to protonation of tertiary amino groups in PDMAE-MA, thus resulting in electrostatic attraction of the negatively charged DNA. By applying electrolysis at -1.0 V(vs. Ag/AgCl reference) electrochemical oxygen reduction resulted in the consumption of hydrogen ions and local pH increase near the electrode surface. The process resulted in recharging the polymer brush to the negative state due to dissociation of carboxylic groups of PMAA, thus repulsing the negatively charged DNA and releasing it from the electrode surface. The DNA release was performed in various combinations from different electrodes in the array assembly. The released DNA operated as input signals for activation of the Boolean logic gates. The developed system represents a step forward in DNA computing, combining for the first time DNA chemical processes with electronic input signals.

An analysis of simple computational strategies to facilitate the design of functional molecular information processors

BACKGROUND

Biological macromolecules (DNA, RNA and proteins) are capable of processing physical or chemical inputs to generate outputs that parallel conventional Boolean logical operators. However, the design of functional modules that will enable these macromolecules to operate as synthetic molecular computing devices is challenging.

RESULTS

Using three simple heuristics, we designed RNA sensors that can mimic the function of a seven-segment display (SSD). Ten independent and orthogonal sensors representing the numerals 0 to 9 are designed and constructed. Each sensor has its own unique oligonucleotide binding site region that is activated uniquely by a specific input. Each operator was subjected to a stringent in silico filtering. Random sensors were selected and functionally validated via ribozyme self cleavage assays that were visualized via electrophoresis.

CONCLUSIONS

By utilising simple permutation and randomisation in the sequence design phase, we have developed functional RNA sensors thus demonstrating that even the simplest of computational methods can greatly aid the design phase for constructing functional molecular devices.

Message in a molecule

Since ancient times, steganography, the art of concealing information, has largely relied on secret inks as a tool for hiding messages. However, as the methods for detecting these inks improved, the use of simple and accessible chemicals as a means to secure communication was practically abolished. Here, we describe a method that enables one to conceal multiple different messages within the emission spectra of a unimolecular fluorescent sensor. Similar to secret inks, this molecular-scale messaging sensor (m-SMS) can be hidden on regular paper and the messages can be encoded or decoded within seconds using common chemicals, including commercial ingredients that can be obtained in grocery stores or pharmacies. Unlike with invisible inks, however, uncovering these messages by an unauthorized user is almost impossible because they are protected by three different defence mechanisms: steganography, cryptography and by entering a password, which are used to hide, encrypt or prevent access to the information, respectively.

Although historically common chemicals were frequently used as secret inks, the ease of readout could not prevent unauthorized reading. Here, the authors report a multi-analyte sensor that can conceal and encrypt messages by responding to simple chemicals, demonstrating a chemical means to secure communication.

Multiplex lateral flow detection and binary encoding enables a molecular colorimetric 7-segment display

Multiplex expansion in point-of-care diagnostics usually requires a linear increase of premium commodities such as reagents or space. Here we demonstrate the power of binary and molecular encoding to compress device operations. We describe the first colorimetric 7-segment display on a paper-based biosensor, providing compact and intuitive read-outs for multiplex detections.

A DNA-based system for selecting and displaying the combined result of two input variables

Oligonucleotide-based technologies for biosensing or bio-regulation produce huge amounts of rich high-dimensional information. There is a consequent need for flexible means to combine diverse pieces of such information to form useful derivative outputs, and to display those immediately. Here we demonstrate this capability in a DNA-based system that takes two input numbers, represented in DNA strands, and returns the result of their multiplication, writing this as a number in a display. Unlike a conventional calculator, this system operates by selecting the result from a library of solutions rather than through logic operations. The multiplicative example demonstrated here illustrates a much more general capability—to generate a unique output for any distinct pair of DNA inputs. The system thereby functions as a lookup table and could be a key component in future, more powerful data-processing systems for diagnostics and sensing.

DNA based sensors provide substantial amounts of information that requires integration and processing. Here the authors demonstrate a DNA-based calculator that takes two inputs, identifies the solution in a library of answers and displays the result.

Bridging the Two Worlds: A Universal Interface between Enzymatic and DNA Computing Systems

Molecular computing based on enzymes or nucleic acids has attracted a great deal of attention due to the perspectives of controlling living systems in the way we control electronic computers. Enzyme-based computational systems can respond to a great variety of small molecule inputs. They have the advantage of signal amplification and highly specific recognition. DNA computing systems are most often controlled by oligonucleotide inputs/outputs and are capable of sophisticated computing as well as controlling gene expressions. Here, we developed an interface that enables communication of otherwise incompatible nucleic-acid and enzyme-computational systems. The enzymatic system processes small molecules as inputs and produces NADH as an output. The NADH output triggers electrochemical release of an oligonucleotide, which is accepted by a DNA computational system as an input. This interface is universal because the enzymatic and DNA computing systems are independent of each other in composition and complexity.

Divide and control: split design of multi-input DNA logic gates

Logic gates made of DNA have received significant attention as biocompatible building blocks for molecular circuits. The majority of DNA logic gates, however, are controlled by the minimum number of inputs: one, two or three. Here we report a strategy to design a multi-input logic gate by splitting a DNA construct.