Thermodynamics versus Kinetics in Nanosynthesis

Easy reversible clustering of gold nanoparticles via pH-Induced assembly of PVP-b-PAA copolymer

The growing demand of novel hybrid organic/inorganic systems with exciting properties has contributed to an increasing need for simplifying production strategies. Here, we report a simple method to obtain controlled three-dimensional hybrid architectures, in particular hybrid supracolloids (hSC), formed by gold nanoparticles and a double hydrophilic block copolymer, specifically the poly(acrylic acid)-block-poly(N-vinyl-2-pyrrolidone) (PAA-b-PVP), directly in aqueous medium. The ubiquitous pH-sensitive poly(acrylic acid) (PAA) block initiates the assembly through pH changes, while the poly(N-vinyl-2-pyrrolidone) block assures the close affinity with the AuNPs. We demonstrate that the formation of hybrid supracolloids (hSC) is the result of the synergetic behavior of the two specific polymeric blocks. Additionally, the entire process shows spontaneous and fast switchability. The nanostructured copolymer behaves like a highly swollen hydrogel and displays a disordered internal structure. The driving force for the association of the copolymer chains is induced by the synergetic effects of the decrease in solubility of the poly(acrylic acid) block and the formation of inter and intra chains hydrogen bonds. These were demonstrated by using small angle X-ray scattering (SAXS), quartz crystal microbalance with dissipation monitoring (QCM-D) and scanning transmission electron microscopy coupled with energy-dispersive X-ray spectroscopy (STEM-EDX). In turn, the AuNPs are randomly spread all over the polymeric matrix, as demonstrated by field emission gun - scanning electron microscopy (FEG-SEM). A correlation analysis reveals the hSC density depends mostly on the initial concentration of AuNPs. These results can inspire the fabrication of more complex structures with multicomponent composition.

Study on Thermally Induced Lignin Aggregation Kinetics for the Preparation of Uniformly Sized Lignin Nanoparticles in Water

Lignin nanoparticles (LNPs) present a potential avenue for the high-value utilization of lignin. However, the simple and ecofriendly method of thermally induced self-assembly for the preparation of LNPs has been overlooked due to a lack of sufficient understanding of the lignin aggregation mechanism. Therefore, this study focuses on the kinetics of thermally induced lignin aggregation. It was found that lignin aggregates formed at lower temperatures exhibit poor stability and are more prone to continuous growth through coalescence. This apparent contradiction with the conventional understanding of thermoresponsive polymers could be attributed to changes in the viscoelasticity of the lignin aggregates during phase separation. Based on this finding, we worked out strategies to optimize the preparation of LNPs in water through thermally induced self-assembly. Pure LNPs with well-defined interfaces and a minimum polydispersity index (PDI) of 0.12 were obtained by increasing the temperature to 125-150 °C. Furthermore, combined with noncovalent modification, LNPs with a PDI of 0.08 would even be formed at 80 °C. Notably, the resulting pure LNPs show potential for application in photonic crystal products that require excellent monodispersity. This study provides a new approach for the environmentally friendly preparation of LNPs with a controllable morphology.

Concentration-Dependent Layer-Stacking and the Influence on Phase-Conversion in Colloidally Synthesized WSe2 Nanocrystals

We report a synthesis of WSe2 nanocrystals in which the number of layers is controlled by varying the precursor concentration. By altering the ratios and concentrations of W(CO)6 and Ph2Se2 in trioctylphosphine oxide, we show that high [Se] and large Se/W ratios lead to an increased number of layers per nanocrystal. As the number of layers per nanocrystal is increased, the nanocrystal ensembles show less phase-conversion from the metastable 2M phase to the thermodynamically favored 2H phase. Density functional theory calculations indicate that the interlayer binding energy increases with the number of layers, indicating that the stronger interlayer interactions in multilayered nanocrystals may increase the energy barrier to phase-conversion. The results presented herein provide insights for directing phase-conversion in solution-phase syntheses of transition metal dichalcogenides.

Morphology and optical properties of Au-Ag hybrid nanoparticles regulation and its ultra-sensitive SERS immunoassay detection in carbohydrate antigen 19-9

The development of an ultra-sensitive detection method for carbohydrate antigen 19-9 (CA19-9) is very important for the early diagnosis of pancreatic cancer. In this work, we developed a new strategy to achieve a variety of Au-Ag hybrid nanoparticles from janus to core-satellite which is controlled by the volume of AgNO3 and the concentration of benzimidazolecarboxylic acid (MBIA). With the volume of AgNO3 increased, Au-Ag hybrid nanoparticles changed from janus to core-satellite and the characteristic absorption peak showed two opposite trends. The size and number of Ag islands were determined by the concentration of MBIA. Au-Ag core-satellites nanoparticles with a large number of small-sized Ag have the highest SERS intensity. Then we used them as SERS nanotags and Au-Polystyrene nanospheres modified by captured anti-CA19-9 antibody as solid substrates to realize the ultra-sensitive detection of CA19-9 with a low limit of detection of 1.25 × 10-6 IU/mL and a wide linear range of 1.00 × 10-5 -1.00 × 104 IU/mL. This work not only demonstrates that MBIA and AgNO3 were the key factors in the growth of Au-Ag hybrid nanoparticles from 2D to 3D structure but also supplies an ultra-sensitive detection method for CA19-9 which has a potential practicability in the clinical early diagnoses of pancreatic cancer.

Deep Blue CsPbBr3 Quantum Wires with Tailored Shapes

Low-dimension metal halide perovskites are attractive for bandgap tunable optoelectronic materials. Among them, 1-D CsPbBr3 quantum wires (QWs) are emerging as promising deep-blue luminescent material. However, the growth dynamics of 1-D perovskite QWs are intricate, making the study and control of 1-D QWs highly challenging. In this study, a strategy for controlling both the length and width of the CsPbBr3 QWs was realized. The temperature-dependent isotropic growth mechanism was revealed and employed as the main tool for the oriented growth of 1-D CsPbBr3 QWs for various aspect ratios. Our results pave the way for the controlled synthesis of ultrasmall perovskite nanocrystals.

Nanomaterials as a Service (NaaS) concept: on-demand protocols for volume synthesis of nanomaterials

Establishing scalable nanomaterials synthesis protocols remains a bottleneck towards their commercialisation and, thus, a topic of intense research and development. Herein, we present an automated machine-learning microfluidic platform capable of synthesising optically active nanomaterials from target spectra originating from prior experience, theorised or published. Implementing unsupervised Bayesian optimisation with Gaussian processes reduces the optimisation time and the need for prior knowledge to initiate the process. Using PTFE tubing and connectors enables facile change in reactor design. Ultimately, the platform substitutes the labour-intensive trial-and-error synthesis and provides a pathway to standardisation and volume synthesis, slowing down the translation and commercialisation of high-quality nanomaterials. As a proof-of-concept, Ag nanoplates and Prussian-blue nanoparticle protocols were optimised and validated for volume production.

Shearing-induced formation of Au nanowires

Shearing-induced nucleation is known in our daily lives, yet rarely discussed in nano-synthesis. Here, we demonstrate an unambiguous shearing-induced growth of Au nanowires. While in static solution Au would predominately deposit on pre-synthesized triangular nanoplates to form nano-bowls, the introduction of stirring or shaking gives rise to nanowires, where an initial nucleation could be inferred. Under specific growth conditions, CTAB is responsible for stabilizing the growth materials and the resulting oversaturation promotes shearing-induced nucleation. At the same time, all Au surfaces are passivated by ligands, so that the growth materials are diverted to relatively fresher sites. We propose that the different degrees of "focused growth" in active surface growth could be represented by watersheds of different slopes, so that the subtle differences between neighbouring sites would set course to opposite pathways, with some sites becoming ever more active and others ever more inhibited. The shearing-induced nuclei, with their initially ligand-deficient surface and higher accessibility to growth materials, win the dynamic inter-particle competition against other sites, explaining the dramatic diversion of growth materials from the seeds to the nanowires.

Recent advances in dynamic reconstruction of electrocatalysts for carbon dioxide reduction

Electrocatalysts undergo structural evolution under operating electrochemical CO2 reduction reaction (CO2RR) conditions. This dynamic reconstruction correlates with variations in CO2RR activity, selectivity, and stability, posing challenges in catalyst design for electrochemical CO2RR. Despite increased research on the reconstruction behavior of CO2RR electrocatalysts, a comprehensive understanding of their dynamic structural evolution under reaction conditions is lacking. This review summarizes recent developments in the dynamic reconstruction of catalysts during the CO2RR process, covering fundamental principles, modulation strategies, and in situ/operando characterizations. It aims to enhance understanding of electrocatalyst dynamic reconstruction, offering guidelines for the rational design of CO2RR electrocatalysts.

Nano-Bricks Assembly Toward 1D Metal Oxide Nanorods

The rational design of hybrid nanocrystals structures facilitates electronic and energetic communication between different component, which can optimize their specific performance. In this study, an efficient approach for building intricate ZnO@h-CoO nanocomposites and their derivatives is presented, based on a lattice-match/mismatch mechanism. Due to the ultra-low lattice mismatch between ZnO and hexagonal CoO (as low as 0.18%), the h-CoO layer enables epitaxial growth on the ZnO templates, and ZnO can also grow epitaxially outside the CoO layer with ease. Similarly, the thickness of the epitaxial layer and the number of alternating layers can be adjusted arbitrarily. In contrast to h-CoO, the growth of cubic crystalline oxides (such as MnO) on ZnO results in the formation of nanoparticles due to a large mismatch index (following the Volmer-Weber models). Interestingly, when h-CoO is introduced as a further component into the MnO/ZnO composite, the cubic crystalline particles on the surface of the ZnO do not disturb the epitaxial growth of the h-CoO, allowing for the formation of nanocomposites with more components. Furthermore, additional units can be added to the nanocomposite further based on the lattice-match/mismatch mechanism, which is analogous to the building nano-bricks.

Mechanochemical hydroquinone regeneration promotes gold salt reduction in sub-stoichiometric conditions of the reducing agent

Bottom-up mechanochemical synthesis (BUMS) has been demonstrated to be an efficient approach for the preparation of metal nanoparticles (NPs), protected by surface agents or anchored on solid supports. However, there are limitations, such as precise size and morphological control, due to a lack of knowledge about the mechanically induced processes of NP formation under milling. In this article, we further investigate the BUMS of AuNPs. Using SiO2 as a solid support, we studied the effect of typical reducing agents, namely NaBH4, L-ascorbic acid, and hydroquinone (HQ), on the conversion of a AuIII source. XANES showed that HQ is the strongest reducing agent under our experimental conditions, leading to the quantitative conversion of gold salt in a few minutes. Interestingly, even when HQ was used in sub-stoichiometric amounts, AuIII could be reduced to ratios higher than 85% after two minutes of milling. Investigations into the byproducts by 1H NMR and GC-FID/MS enabled the identification HQ regeneration and the formation of its derivatives. We mainly focused on benzoquinone (BQ), which is the product of the oxidation of HQ as it reduces the gold salt. We could demonstrate that HQ is regenerated from BQ exclusively under milling and acidic conditions. The regenerated HQ and other HQ-chlorinated molecules could then reduce gold-oxidized species, leading to higher conversions and economy of reactants. Our study highlights the intriguing and complex mechanisms of mechanochemical systems, in addition to fostering the atom and energy economy side of mechanochemical means to produce metal nanoparticles.

Dynamic Reconstruction of Two-Dimensional Defective Bi Nanosheets for Efficient Electrocatalytic Urea Synthesis

Catalyst surface dynamics drive the generation of active species for electrocatalytic reactions. Yet, the understanding of dominant site formation and reaction mechanisms is limited. In this study, we thoroughly investigate the dynamic reconstruction of two-dimensional defective Bi nanosheets from exfoliated Bi2Se3 nanosheets under electrochemical CO2 and nitrate (NO3 -) reduction conditions. The ultrathin Bi2Se3 nanosheets obtained by NaBH4-assisted cryo-mediated liquid-phase exfoliation are more easily reduced and reconstructed to Bi nanosheets with high-density grain boundaries (GBs; GB-rich Bi). The reconstructed GB-rich Bi catalyst affords a remarkable yield rate of 4.6 mmol h-1 mgcat. -1 and Faradaic efficiency of 32 % for urea production at -0.40 V vs. RHE. Notably, this yield rate is 2 and 8.2 times higher than those of the low-GB Bi and bulk Bi catalysts, respectively. Theoretical analysis demonstrates that the GB sites significantly reduce the *CO and *NH2 intermediate formation energy and C-N coupling energy barrier, enabling selective urea electrosynthesis on the GB-rich Bi catalyst. This work will trigger further research into the structure-activity interplay in dynamic processes using in situ techniques.

Microbial fermentation-based synthesis of nano-curcumin suggesting the role of pullulan in nano-formulation

Curcumin is a multitargeting nutraceutical with numerous health benefits, however, its efficacy is limited due to poor aqueous solubility and reduced bioavailability. While nano-formulation has emerged as an alternative to encounter such issues, it often involves use of toxic solvents. Microbial synthesis may be an innovative solution to address this lacuna. Present study, for the first time, reports exploitation of Aureobasidium pullulans RBF4A3 for production of nano-curcumin. For this purpose, Aureobasidium pullulans RBF4A3 was inoculated in YPD media along with curcumin (0.1 mg/mL) and incubated for 24 h, 48 h, and 72 h. Subsequently, residual sugar, biomass, EPS concentration, curcumin concentration, and curcumin nanoparticle size were measured. As a result, nano-curcumin with an average particle size of 31.63 nm and enhanced aqueous solubility was obtained after 72 h. Further, investigations suggested that pullulan, a reducing polysaccharide, played a significant role in curcumin nano-formulation. Pullulan-mediated nano-curcumin formulation, with an average particle size of 24 nm was achieved with conversion rate of around 59.19 %, suggesting improved aqueous solubility. Additionally, the anti-oxidant assay of the resulting nano-curcumin was around 53.7 % per μg. Moreover, kinetics and thermodynamic studies of pullulan-based nano-curcumin revealed that it followed first-order kinetics and was favored by elevated temperature for efficient bio-conversion. Also, various physico-chemical investigations like FT-IR, NMR, and XRD reveal that pullulan backbone remains intact while forming curcumin nanoparticle. This study may open up new avenues for synthesizing nano-polyphenols through a completely green and solvent free process with plausible diverse applications.

Ultrasound technology assisted colloidal nanocrystal synthesis and biomedical applications

Non-invasive and high spatiotemporal resolution mythologies for the diagnosis and treatment of disease in clinical medicine promote the development of modern medicine. Ultrasound (US) technology provides a non-invasive, real-time, and cost-effective clinical imaging modality, which plays a significant role in chemical synthesis and clinical translation, especially in in vivo imaging and cancer therapy. On the one hand, the US treatment is usually accompanied by cavitation, leading to high temperature and pressure, so-called "hot spot", playing a significant role in sonochemical-based colloidal synthesis. Compared with the classical nucleation synthetic method, the sonochemical synthesis strategy presents high efficiency for the fabrication of colloidal nanocrystals due to its fast nucleation and growth procedure. On the other hand, the US is attractive for in vivo and medical treatment, with applications increasing with the development of novel contrast agents, such as the micro and nano bubbles, which are widely used in neuromodulation, with which the US can breach the blood-brain barrier temporarily and safely, opening a new door to neuromodulation and therapy. In terms of cancer treatment, sonodynamic therapy and US-assisted synergetic therapy show great effects against cancer and sonodynamic immunotherapy present unparalleled potentiality compared with other synergetic therapies. Further development of ultrasound technology can revolutionize both chemical synthesis and clinical translation by improving efficiency, precision, and accessibility while reducing environmental impact and enhancing patient care. In this paper, we review the US-assisted sonochemical synthesis and biological applications, to promote the next generation US technology-assisted applications.

Water-soluble ionic carbon nitride as unconventional stabilizer for highly catalytically active ultrafine gold nanoparticles

Ultrafine metal nanoparticles (NPs) hold promise for applications in many fields, including catalysis. However, ultrasmall NPs are typically prone to aggregation, which often leads to performance losses, such as severe deactivation in catalysis. Conventional stabilization strategies (e.g., immobilization, embedding, or surface modification by capping agents) are typically only partly effective and often lead to loss of catalytic activity. Herein, a novel type of stabilizers based on water-soluble ionic (K+ and Na+ containing) polymeric carbon nitride (i.e., K,Na-poly(heptazine imide) = K,Na-PHI) is reported that enables effective stabilization of highly catalytically active ultrafine (size of ∼2-3 nm) gold NPs. Experimental and theoretical comparative studies using different structural units of K,Na-PHI (i.e., cyanurate, melonate, cyamelurate) indicate that the presence of functionalized heptazine moieties is crucial for the synthesis and stabilization of small Au NPs. The K,Na-PHI-stabilized Au NPs exhibit remarkable dispersibility and outstanding stability even in solutions of high ionic strength, which is ascribed to more effective charge delocalization in the large heptazine units, resulting in more effective electrostatic stabilization of Au NPs. The outstanding catalytic performance of Au NPs stabilized by K,Na-PHI is demonstrated using the selective reduction of 4-nitrophenol to 4-aminophenol by NaBH4 as a model reaction, in which they outperform even the benchmark "naked" Au NPs electrostatically stabilized by excess NaBH4. This work thus establishes ionic carbon nitrides (PHI) as alternative capping agents enabling effective stabilization without compromising surface catalysis, and opens up a route for further developments in utilizing PHI-based stabilizers for the synthesis of high-performance nanocatalysts.

Hybrid Poly(β-amino ester) Triblock Copolymers Utilizing a RAFT Polymerization Grafting-From Methodology

The biocompatibility, biodegradability, and responsiveness of poly(β-amino esters) (PBAEs) has led to their widespread use as biomaterials for drug and gene delivery. Nonetheless, the step-growth polymerization mechanism that yields PBAEs limits the scope for their structural optimization toward specific applications because of limited monomer choice and end-group modifications. Moreover, to date the post-synthetic functionalization of PBAEs has relied on grafting-to approaches, challenged by the need for efficient polymer-polymer coupling and potentially difficult post-conjugation purification. Here a novel grafting-from approach to grow reversible addition-fragmentation chain transfer (RAFT) polymers from a PBAE scaffold is described. This is achieved through PBAE conversion into a macromolecular chain transfer agent through a multistep capping procedure, followed by RAFT polymerization with a range of monomers to produce PBAE-RAFT hybrid triblock copolymers. Following successful synthesis, the potential biological applications of these ABA triblock copolymers are illustrated through assembly into polymeric micelles and encapsulation of a model hydrophobic drug, followed by successful nanoparticle (NP) uptake in breast cancer cells. The findings demonstrate this novel synthetic methodology can expand the scope of PBAEs as biomaterials.

Super-assembly platform for diverse nanoparticles with tunable topological architectures and surface morphologies

Self-assembly leveraged by nature enables the sophisticated generation of a wide range of nanoparticles (NPs) with rich architectures and morphologies. However, existing artificial self-assembly platforms largely only allow for the fabrication of single type of NPs with limited structures, due to their inability to define interfacial interaction between seeds and growth materials, which is critically important to gain controllable growth patterns of the grown materials on the seeds' surface. Here, we report a versatile super-assembly platform that shows the capabilities to fabricate diverse NPs with tunable topological architectures and surface morphologies, e.g., molecular-like NPs, hollow asymmetric NPs, patchy NPs, etc. We unprecedentedly discovered the powerful functions of polyvinylpyrrolidone (PVP), which enable us to well define interfacial interaction between growth materials and seeds to achieve the controllable and tunable generation of various complex topological growth patterns. Moreover, the nucleation pattern (island nucleation or layered nucleation) of the patches can be thermodynamically modulated via the polarity of the solvent, while the number and size of the patches can be kinetically tuned by the ratio of polystyrene (PS), precursor, and catalyst. Interestingly, the hollow NPs can be generated by single-one processing step in our platform, unlike the multiple steps laboriously and widely employed by previously reported fabrication platforms. In addition, we demonstrate that our annealed NPs can not only selectively reflect visible light, and show well-controlled colors from gray, blue, to green, but also exhibit excellent photothermal conversion performances with a high photothermal conversion efficiency of 68.7% that are superior to currently routinely reported of 40%. This super-assembly platform can serve as a powerful toolset to sophisticatedly create varied NPs with tunable hierarchical architectures and controllable surface morphologies, which would significantly benefit the development of drug delivery, nanomaterial assembly, nano pigments, nanoreactors, and beyond.

A polymer tethering strategy to achieve high metal loading on catalysts for Fenton reactions

The development of heterogenous catalysts based on the synthesis of 2D carbon-supported metal nanocatalysts with high metal loading and dispersion is important. However, such practices remain challenging to develop. Here, we report a self-polymerization confinement strategy to fabricate a series of ultrafine metal embedded N-doped carbon nanosheets (M@N-C) with loadings of up to 30 wt%. Systematic investigation confirms that abundant catechol groups for anchoring metal ions and entangled polymer networks with the stable coordinate environment are essential for realizing high-loading M@N-C catalysts. As a demonstration, Fe@N-C exhibits the dual high-efficiency performance in Fenton reaction with both impressive catalytic activity (0.818 min-1) and H2O2 utilization efficiency (84.1%) using sulfamethoxazole as the probe, which has not yet been achieved simultaneously. Theoretical calculations reveal that the abundant Fe nanocrystals increase the electron density of the N-doped carbon frameworks, thereby facilitating the continuous generation of long-lasting surface-bound •OH through lowering the energy barrier for H2O2 activation. This facile and universal strategy paves the way for the fabrication of diverse high-loading heterogeneous catalysts for broad applications.

Liquid Nanoparticles for Nanocatalytic Cancer Therapy

Nanotechnology is revolutionizing cancer therapy, and catalyzes the emerging of ion-involved cancer-therapeutic modality, which unfortunately suffers from undesirable nanocarriers for efficient intracellular ion delivery. To radically extricate from this critical issue, the glutathione (GSH)-responsive organosilica network is employed to lock the liquid drops at the nanoscale via a general bottom-up strategy to achieve the systemic delivery of "ion drugs". In this work, a sulfate radical generation donor (Na2 S2 O8 ), as a paradigm "ion drug", is entrapped into this liquid nanoparticle for efficiently delivering to the tumor region. After further surface engineering with pH-responsive tannic acid-Fe2+ framework, these liquid nanoparticles achieve tumor-microenvironmental pH/GSH-dual responsive ion release (Fe2+ /Na+ /S2 O8 2- ) after reaching the tumor sites, where the Fe2+ further triggers S2 O8 2- to generate toxic •SO4 - and •OH, effectively executing cancer cell ferroptosis (Fe2+ , reactive oxygen species-ROS) and pyroptosis (Na+ , ROS). Such a tumor-responsive/specific liquid nanoplatform is highly instructive for further ion-mediated nanomedicine and disease treatment.

Bimetallic Nanoalloy Catalysts for Green Energy Production: Advances in Synthesis Routes and Characterization Techniques

Bimetallic Nanoalloy catalysts have diverse uses in clean energy, sensing, catalysis, biomedicine, and energy storage, with some supported and unsupported catalysts. Conventional synthetic methods for producing bimetallic alloy nanoparticles often produce unalloyed and bulky particles that do not exhibit desired characteristics. Alloys, when prepared with advanced nanoscale methods, give higher surface area, activity, and selectivity than individual metals due to changes in their electronic properties and reduced size. This review demonstrates the synthesis methods and principles to produce and characterize highly dispersed, well-alloyed bimetallic nanoalloy particles in relatively simple, effective, and generalized approaches and the overall existence of conventional synthetic methods with modifications to prepare bimetallic alloy catalysts. The basic concepts and mechanistic understanding are represented with purposely selected examples. Herein, the enthralling properties with widespread applications of nanoalloy catalysts in heterogeneous catalysis are also presented, especially for Hydrogen Evolution Reaction (HER), Oxidation Reduction Reaction (ORR), Oxygen Evolution Reaction (OER), and alcohol oxidation with a particular focus on Pt and Pd-based bimetallic nanoalloys and their numerous fields of applications. The high entropy alloy is described as a complicated subject with an emphasis on laser-based green synthesis of nanoparticles and, in conclusion, the forecasts and contemporary challenges for the controlled synthesis of nanoalloys are addressed.

An explainable machine-learning approach for revealing the complex synthesis path-property relationships of nanomaterials

Machine learning (ML) models have recently shown important advantages in predicting nanomaterial properties, which avoids many trial-and-error explorations. However, complex variables that control the formation of nanomaterials exhibiting the desired properties still need to be better understood owing to the low interpretability of ML models and the lack of detailed mechanism information on nanomaterial properties. In this study, we developed a methodology for accurately predicting multiple synthesis parameter-property relationships of nanomaterials to improve the interpretability of the nanomaterial property mechanism. As a proof-of-concept, we designed glutathione-gold nanoclusters (GSH-AuNCs) exhibiting an appropriate fluorescence quantum yield (QY). First, we conducted 189 experiments and synthesized different GSH-AuNCs by varying the thiol-to-metal molar ratio and reaction temperature and time in reasonable ranges. The fluorescence QY of GSH-AuNCs could be systematically and independently programmed using different experimental parameters. We used limited GSH-AuNC synthesis parameter data to train an extreme gradient boosting regressor model. Moreover, we improved the interpretability of the ML model by combining individual conditional expectation, double-variable partial dependence, and feature interaction network analyses. The interpretability analyses established the relationship between multiple synthesis parameters and fluorescence QYs of GSH-AuNCs. The results represent an essential step towards revealing the complex fluorescence mechanism of thiolated AuNCs. Finally, we constructed a synthesis phase diagram exceeding 6.0 × 104 prediction variables for accurately predicting the fluorescence QY of GSH-AuNCs. A multidimensional synthesis phase diagram was obtained for the fluorescence QY of GSH-AuNCs by searching the synthesis parameter space in the trained ML model. Our methodology is a general and powerful complementary strategy for application in material informatics.

Lattice-Strain Engineering for Heterogenous Electrocatalytic Oxygen Evolution Reaction

The energy efficiency of metal-air batteries and water-splitting techniques is severely constrained by multiple electronic transfers in the heterogenous oxygen evolution reaction (OER), and the high overpotential induced by the sluggish kinetics has become an uppermost scientific challenge. Numerous attempts are devoted to enabling high activity, selectivity, and stability via tailoring the surface physicochemical properties of nanocatalysts. Lattice-strain engineering as a cutting-edge method for tuning the electronic and geometric configuration of metal sites plays a pivotal role in regulating the interaction of catalytic surfaces with adsorbate molecules. By defining the d-band center as a descriptor of the structure-activity relationship, the individual contribution of strain effects within state-of-the-art electrocatalysts can be systematically elucidated in the OER optimization mechanism. In this review, the fundamentals of the OER and the advancements of strain-catalysts are showcased and the innovative trigger strategies are enumerated, with particular emphasis on the feedback mechanism between the precise regulation of lattice-strain and optimal activity. Subsequently, the modulation of electrocatalysts with various attributes is categorized and the impediments encountered in the practicalization of strained effect are discussed, ending with an outlook on future research directions for this burgeoning field.

Elucidating the Role of Capping Agents in Facet-Dependent Adsorption Performance of Hematite Nanostructures

Organic capping agents are a ubiquitous and crucial part of preparing reproducible and homogeneous batches of nanomaterials, particularly nanocrystals with well-defined facets. Despite studies reporting surface ligands (e.g., capping agents) having a non-negligible role in catalytic behavior, their impact is less understood in contaminant adsorption, an important consideration given their potential to obfuscate facet-dependent trends in performance. To ascribe observed behaviors to the facet or the ligand, this report evaluates the impact of poly(N-vinyl-2-pyrrolidone) (PVP), a commonly utilized capping agent, on the adsorption performance of nanohematite particles of varying prevailing facet in the removal of selenite (Se(IV)) as a model system. The PVP capping agent reduces the available surface area for contaminant binding, thus resulting in a reduction in overall Se(IV) adsorbed. However, accounting for the effects of surface area, {012}-faceted nanohematite demonstrates a significantly higher sorption capacity for Se(IV) compared with that of {001}-faceted nanohematite. Notably, chemical treatment is minimally effective in removing strongly bound PVP, indicating that complete removal of surface ligands remains challenging.

Nucleation and Growth of Bipyramidal Yb:LiYF4 Nanocrystals-Growing Up in a Hot Environment

Lanthanide-doped LiYF₄ (Ln:YLF) is commonly used for a broad variety of optical applications, such as lasing, photon upconversion and optical refrigeration. When synthesized as nanocrystals (NCs), this material is also of interest for biological applications and fundamental physical studies. Until now, it was unclear how Ln:YLF NCs grow from their ionic precursors into tetragonal NCs with a well-defined, bipyramidal shape and uniform dopant distribution. Here, we study the nucleation and growth of ytterbium-doped LiYF₄ (Yb:YLF), as a template for general Ln:YLF NC syntheses. We show that the formation of bipyramidal Yb:YLF NCs is a multistep process starting with the formation of amorphous Yb:YLF spheres. Over time, these spheres grow via Ostwald ripening and crystallize, resulting in bipyramidal Yb:YLF NCs. We further show that prolonged heating of the NCs results in the degradation of the NCs, observed by the presence of large LiF cubes and small, irregular Yb:YLF NCs. Due to the similarity in chemical nature of all lanthanide ions our work sheds light on the formation stages of Ln:YLF NCs in general.

Site-specific growth of gold nanoparticles on Bismuth Selenide hexagonal nanoplates

Highly site-specific growth of gold nanoparticles (AuNPs) on Bismuth Selenide (Bi₂Se₃) hexagonal nanoplates was achieved by fine-tuning the growth kinetics of Au through controlling the coordination number of the Au ion in MBIA-Au³⁺ complex. With increasing concentration of MBIA, the increased amount and the coordination number of the MBIA-Au³⁺ complex results in the decrease of the reduction rate of Au. The slowed growth kinetics of Au allowed the recognition of the sites with different surface energy on the anisotropic Bi₂Se₃ hexagonal nanoplates. As a result, the site-specific growth of AuNPs at the corner, the edge, and the surface of the Bi₂Se₃ nanoplates were successfully achieved. This way of growth kinetic control was proven to be effective in constructing well-defined heterostructures with precise site-specificity and high purity of the product. This is helpful for the rational design and controlled synthesis of sophisticated hybrid nanostructures and would eventually promote their applications in various fields.

Strong Ligand Control for Noble Metal Nanostructures

ConspectusNanosynthesis is the art of creating nanostructures, with on-demand synthesis as the ultimate goal. Noble metal nanoparticles have wide applications, but the available synthetic methods are still limited, often giving nanospheres and symmetrical nanocrystals. The fundamental reason is that the conventional weak ligands are too labile to influence the materials deposition, so the equivalent facets always grow equivalently. Considering that the ligands are the main synthetic handles in colloidal synthesis, our group has been exploring strong ligands for new growth modes, giving a variety of sophisticated nanostructures. The model studies often involve metal deposition on seeds functionalized with a certain strong ligand, so that the uneven distribution of the surface ligands could guide the subsequent deposition.In this Account, we focus on the design principles underlying the new growth modes, summarizing our efforts in this area along with relevant literature works. The basics of ligand control are first revisited. Then, the four major growth modes are summarized as follows: (1) The curvature effects would divert the materials deposition away from the high-curvature tips when the ligands are insufficient. With ligands fully covering the seeds, the sparser ligand packing at the tips would then promote the initial nucleation thereon. (2) The strong ligands may get trapped under the incoming metal layer, thus modulating the interfacial energy of the core-shell interface. The evidence for embedded ligands is discussed, along with examples of Janus nanostructures arising from the synthetic control, including metal-metal, metal-semiconductor, and metal-C₆₀ systems using a variety of ligands. (3) Active surface growth is an unusual mode with divergent growth rates, so that part of the emerging surface is inhibited, and the growth is focused onto a few active sites. With seeds attached to oxide substrates, the selective deposition at the metal-substrate interface produces ultrathin nanowires. The synthesis can be generally applied to grow Au, Ag, Pd, Pt, and hybrid nanowires, with straight, spiral, or helical structures, and even rapid alteration of segments via electrochemical methods. In contrast, active surface growth for colloidal nanoparticles has to be more carefully controlled. The rich growth phenomena are discussed, highlighting the role of strong ligands, the control of deposition rates, the chiral induction, and the evidence for the active sites. (4) An active site with sparse ligands could also be exploited in etching, where the freshly exposed surface would promote further etching. The result is an unusual sharpening etching mode, in contrast to the conventional rounding mode for minimized surface energy.Colloidal nanosynthesis holds great promise for scalable on-demand synthesis, providing the crucial nanomaterials for future explorations. The strong ligands have delivered powerful synthetic controls, which could be further enhanced with in-depth studies on growth mechanisms and synthetic strategies, as well as functions and properties.

PDDA induced step-pyramidal growth of nickel-platinum (Ni-Pt) nanoparticles for enhanced 4-nitrophenol reduction

Herein, we report the synthesis of novel platinum-based nanoparticles with step-pyramidal growth induced by poly(diallyldimethylammonium chloride) (PDDA). The complex stepped pyramidal shape became the central point for outstanding catalytic reduction of 4-nitrophenol, overcoming the activity of bare Pt nanoparticles. These results are valuable for the catalytic degradation of reactive molecules.

Modulating the Charge Transfer Plasmon in Bridged Au Core-Satellite Homometallic Nanostructures

The localized surface plasmon resonance (LSPR) is one of the important properties for noble metal nanoparticles. Tuning the LSPR on demand thus has attracted tremendous interest. Beyond the size and shape control, manipulating intraparticle coupling is an effective way to tailor their LSPR. The charge transfer plasmon (CTP) is the most important mode of conductive coupling between subunits linked by conductive bridges that are well studied for structures prepared on substrates by lithography method. However, the colloidal synthesis of CTP structure remains a great challenge. This work reports the colloidal synthesis of extraordinary bridged Au core-satellite structures by exploiting the buffer effect of polydopamine shell on Au core for Au atom diffusion, in which the Au bridge is well controlled in terms of width and length. Benefiting from the tunable Au bridges, the resonance energy of the CTP can be readily controlled. As a result, the LSPR absorptions of the core-satellite structures are continuously tuned within the NIR spectral range (from 900 to >1300 nm), demonstrating their great potentials for ultrafast nano-optics and biomedical applications.

Programming Nucleation and Growth in Colloidal Crystals Using DNA

Colloidal crystal engineering with DNA has advanced beyond controlling the lattice symmetry and parameters of ordered crystals to now tuning crystal habit and size. However, the predominately used slow-cooling procedure that enables faceted crystal habits also limits control over crystal size and uniformity because nucleation and growth cannot be separated. Here, we explore how DNA sequence design can be used to deliberately separate nucleation and growth in a given crystallization process. Specifically, two batches of complementary particles are created with one batch exhibiting perfectly complementary base pairs while the other has a strategically introduced mismatch. This design enables the weaker binding "growth" particles to participate in heterogeneous growth on the nucleates formed from the stronger binding "seed" particles, effectively eliminating secondary nucleation pathways. By eliminating secondary nucleation events, this approach improves crystal uniformity, as measured by polydispersity (from PDI = 0.201 to 0.091). By using this approach with two different particle cores (gold and silver), we show how core-shell colloidal crystals can be synthesized in a one-pot fashion. This work shows how tuning DNA interaction strength can profoundly impact crystal size, uniformity, and structure, parameters central to using such materials as device components.

Engineering the Au-Cu2 O Crystalline Interfaces for Structural and Catalytic Integration

Precise structural control has attracted tremendous interest in pursuit of the tailoring of physical properties. Here, this work shows that through strong ligand-mediated interfacial energy control, Au-Cu₂ O dumbbell structures where both the Au nanorod (AuNR) and the partially encapsulating Cu₂ O domains are highly crystalline. The synthetic advance allows physical separation of the Au and Cu₂ O domains, in addition to the use of long nanorods with tunable absorption wavelength, and the crystalline Cu₂ O domain with well-defined facets. The interplay of plasmon and Schottky effects boosts the photocatalytic performance in the model photodegradation of methyl orange, showing superior catalytic efficiency than the AuNR@Cu₂ O core-shell structures. In addition, compared to the typical core-shell structures, the AuNR-Cu₂ O dumbbells can effectively electrochemically catalyze the CO₂ to C₂₊ products (ethanol and ethylene) via a cascade reaction pathway. The excellent dual function of both photo- and electrocatalysis can be attributed to the fine physical separation of the crystalline Au and Cu₂ O domains.

Shape-Controlled Synthesis of Platinum-Based Nanocrystals and Their Electrocatalytic Applications in Fuel Cells

To achieve environmentally benign energy conversion with the carbon neutrality target via electrochemical reactions, the innovation of electrocatalysts plays a vital role in the enablement of renewable resources. Nowadays, Pt-based nanocrystals (NCs) have been identified as one class of the most promising candidates to efficiently catalyze both the half-reactions in hydrogen- and hydrocarbon-based fuel cells. Here, we thoroughly discuss the key achievement in developing shape-controlled Pt and Pt-based NCs, and their electrochemical applications in fuel cells. We begin with a mechanistic discussion on how the morphology can be precisely controlled in a colloidal system, followed by highlighting the advanced development of shape-controlled Pt, Pt-alloy, Pt-based core@shell NCs, Pt-based nanocages, and Pt-based intermetallic compounds. We then select some case studies on models of typical reactions (oxygen reduction reaction at the cathode and small molecular oxidation reaction at the anode) that are enhanced by the shape-controlled Pt-based nanocatalysts. Finally, we provide an outlook on the potential challenges of shape-controlled nanocatalysts and envision their perspective with suggestions.

Imaging Photon-Induced Near-Field Distributions of a Plasmonic, Self-Assembled Vesicle by a Laser-Integrated Electron Microscope

Plasmonic polymeric nanoassemblies offer valuable opportunities in photoconversion applications. Localized surface plasmon mechanisms behind such nanoassemblies govern their functionalities under light illumination. However, an in-depth investigation at the single nanoparticle (NP) level is still challenging, especially when the buried interface is involved, due to the availability of suitable techniques. Here, we synthesized an anisotropic heterodimer composed of a self-assembled polymer vesicle (THPG) capped with a single gold NP, enabling an 8-fold enhancement in hydrogen generation compared to the nonplasmonic THPG vesicle. We explored the anisotropic heterodimer at the single particle level by employing advanced transmission electron microscopes, including one equipped with a femtosecond pulsed laser, which allows us to visualize the polarization- and frequency-dependent distribution of the enhanced electric near fields at the vicinity of Au cap and Au-polymer interface. These elaborated fundamental findings may guide designing new hybrid nanostructures tailored for plasmon-related applications.

Chloride enables the growth of Ag nanocubes and nanowires by making PVP binding facet-selective

Solution-phase synthesis of metal nanocrystals with multiple additives is a common strategy for control over nanocrystal shape, and thus control over their properties. However, few rules are available to predict the effect of multiple capping agents on metal nanocrystal shapes, making it hard to rationally design synthetic conditions. This work uses a combination of seed-mediated growth, single-crystal electrochemistry, and DFT calculations to determine the roles of PVP and Cl^- in the anisotropic growth of single-crystal and penta-twinned silver nanocrystals. Single-crystal seeds grow into truncated octahedra bounded by a mixture of {111} and {100} facets in the presence of 0.03-30 mM PVP, but when 3-6 μM Cl^- is added with PVP, the single-crystal seeds grow into cubes bounded by {100} facets. Electrochemical measurements on Ag(100) and Ag(111) single-crystal electrodes show PVP is a capping agent but it exhibits no selectivity for a particular facet. Addition of Cl^- to PVP further passivates Ag(100) but not Ag(111), leading to conditions that favor formation of nanocubes. DFT calculations indicate the preferential binding of Cl^- to Ag(100) causes preferential binding of PVP to Ag(100). The combined results indicate the presence or absence of Cl^- modulates binding of PVP to (100) facets, leading to the formation of nanocubes with Cl^-, or truncated octahedra without it.

3D plasmonic coral nanoarchitecture paper for label-free human urine sensing and deep learning-assisted cancer screening

Practical human biofluid sensing requires a sensor device to differentiate patients from the normal group with high sensitivity and specificity. Label-free molecular identification from human biofluids allows direct classification of abnormal samples, providing insights for disease diagnosis and finding of new biomarkers. Here, we introduce a label-free surface-enhanced Raman scattering sensor based on a three-dimensional plasmonic coral nanoarchitecture (3D-PCN), which has strong electromagnetic field enhancement through multiple hot spots. The 3D-PCN was synthesized on a paper substrate via direct one-step gold reduction, forming a coral-like nanoarchitecture with high absorption property for biofluids. This was fabricated as a urine test strip and then integrated with a handheld Raman system to develop an on-site urine diagnostic platform. The developed platform successfully classified the human prostate and pancreatic cancer urines in a label-free method supported by two types of deep learning networks, with high clinical sensitivity and specificity. Our technology has the potential to be utilized not only for urinary cancer diagnosis but also for various human biofluid sensing systems as a future point-of-care testing platform.

Etching suppression as a means to Pt dendritic ultrathin nanosheets by seeded growth

2D ultrathin metal nanostructures are emerging materials displaying distinct physical and chemical properties compared to their analogues of different dimensionalities. Nanosheets of fcc metals are intriguing, as their crystal structure does not favour a 2D configuration. Thanks to their increased surface-to-volume ratios and the optimal exposure of low-coordinated sites, 2D metal nanostructures can be advantageously exploited in catalysis. Synthesis approaches to ultrathin nanosheets of pure platinum are scarce compared to other noble metals and to Pt-based alloys. Here, we present the selective synthesis of Pt ultrathin nansosheets by a simple seeded-growth method. The most crucial point in our approach is the selective synthesis of Pt seeds comprising planar defects, a main driving force for the 2D growth of metals with fcc structure. Defect engineering is employed here, not in order to disintegrate, but for conserving the defect comprising seeds. This is achieved by in situ elimination of the principal etching agent, chloride, which is present in the PtCl₂ precursor. As a result of etching suppression, twinned nuclei, that are selectively formed during the early stage of nucleation, survive and grow to multipods comprising planar defects. Using the twinned multipods as seeds for the subsequent 2D overgrowth of Pt from Pt(acac)₂ yields ultrathin dendritic nanosheets, in which the planar defects are conserved. Using phenylacetylene hydrogenation as a model reaction of selective hydrogenation, we compared the performance of Pt nanosheets to that of a commercial Pt/C catalyst. The Pt nanosheets show better stability and much higher selectivity to styrene than the commercial Pt/C catalyst for comparable activity.

Diffusion-controlled bridging of the Au Island and Au core in Au@Rh(OH)3 core-shell structure

Hybrid nanostructures have garnered considerable interest because of their fascinating properties owing to the hybridization of materials and their structural varieties. In this study, we report the synthesis of [Au@Rh(OH)₃]-Au island heterostructures using a seed-mediated sequential growth method. Through the thiol ligand-mediated interfacial energy, Au@Rh(OH)₃ core-shell structures with varying shell thicknesses were successfully obtained. On these Au@Rh(OH)₃ core-shell seeds, by modulating the diffusion of HAuCl₄ in the porous Rh(OH)₃ shell, site-specific growth of Au islands on the inner Au core or on the surface of the outer Rh(OH)₃ shell was successfully achieved. Consequently, two types of distinct structures, the Au island-on-[Au@Rh(OH)₃] dimer and Au island-Au bridge-[Au@Rh(OH)₃] dumbbell structures with thin necks were obtained. Further modulations of the growth kinetics led to the formation of Au plate-Au bridge-[Au@Rh(OH)₃] heterostructures with larger structural anisotropy. The flexible structural variations were demonstrated to be an effective means of modulating the plasmonic properties; the Au-Au heterostructures exhibited tunable localized surface plasmon resonance in the visible-near-infrared spectral region and can be used as surface-enhanced Raman scattering (SERS) substrates capable of emitting strong SERS signals. This diffusion-controlled growth of Au bridges in the Rh(OH)₃ shells (penetrating growth) is an interesting new approach for structural control, which enriches the tool box for colloidal nanosynthesis. This advancement in structural control is expected to create new approaches for colloidal synthesis of sophisticated nanomaterials, and eventually enable their extensive applications in various fields.

How a Facet of a Nanocrystal Is Formed: The Concept of the Symmetry Based Kinematic Theory

Conventional nanocrystal (NC) growth mechanisms have overwhelmingly focused on the final exposed facets to explain shape evolution. However, how the final facets are formed from the initial nuclei or seeds, has not been specifically interrogated. In this concept paper, we would like to concentrate on this specific topic, and introduce the symmetry based kinematic theory (SBKT) to explain the formation and evolution of crystal facets. It is a crystallographic theory based on the classical crystal growth concepts developed to illustrate the shape evolution during the NC growth. The most important principles connecting the basic NC growth processes and morphology evolution are the preferential growth directions and the properties of kinematic waves. On the contrary, the final facets are just indications of how the crystal growth terminates, and their formation and evolution rely on the NC growth processes: surface nucleation and layer advancement. Accordingly, the SBKT could even be applied to situations where non-faceted NCs such as spheres are formed.

Self-assembly-based integration of Ag@Au oligomers and core/shell nanoparticles on polymer chips for efficient sensing devices

Two distinct Ag/Au nanocomposites, namely, hetero-oligomers and eccentric core/shells were obtained by one-step polymer self-assembly-based fabrication. The Ag concentration-dependent, facet-specific passivation, and presence or absence of anisotropic facets were the main factors responsible for controlling the structures of the final products. Based on an understanding of the role of Ag⁺ ions in controlling the shape of anisotropic gold nanoparticles (AuNPs), tailored concentrations of Ag⁺ were applied to design nanoparticles with desired anisotropic surface facets to allow site-specific Ag coatings on AuNPs. The Ag additives acted as shape-directing agents due to an underpotential deposition (UPD) that was responsible for stabilizing the various surface facets that enclose the AuNPs. The morphology differences between the substrate samples resulted in discrete plasmonic and sensing features. In surface-enhanced Raman spectroscopy (SERS) studies, we showed that the site-selective deposition of Ag on anisotropic gold nanohexagons (AuNHs) delivers more advantages as compared to their hetero-oligomer nanostructured counterparts due to synergistic effects.

Fine-tuning of the size of supramolecular nanotoroids suppresses the subsequent catenation of nano-[2]catenane

The reduction in the inner diameter of the nanotoroids of a π-conjugated barbiturate monomer results in nano-[2]catenanes in a high yield due to enhanced secondary nucleation and subsequent steric suppression of further catenation.

Three-dimensional nanofabrication via ultrafast laser patterning and kinetically regulated material assembly

A major challenge in nanotechnology is the fabrication of complex three-dimensional (3D) structures with desired materials. We present a strategy for fabricating arbitrary 3D nanostructures with a library of materials including metals, metal alloys, 2D materials, oxides, diamond, upconversion materials, semiconductors, polymers, biomaterials, molecular crystals, and inks. Specifically, hydrogels patterned by femtosecond light sheets are used as templates that allow for direct assembly of materials to form designed nanostructures. By fine-tuning the exposure strategy and features of the patterned gel, 2D and 3D structures of 20- to 200-nm resolution are realized. We fabricated nanodevices, including encrypted optical storage and microelectrodes, to demonstrate their designed functionality and precision. These results show that our method provides a systematic solution for nanofabrication across different classes of materials and opens up further possibilities for the design of sophisticated nanodevices.

Colloidal Synthesis of Metal Nanocrystals: From Asymmetrical Growth to Symmetry Breaking

Nanocrystals offer a unique platform for tailoring the physicochemical properties of solid materials to enhance their performances in various applications. While most work on controlling their shapes revolves around symmetrical growth, the introduction of asymmetrical growth and thus symmetry breaking has also emerged as a powerful route to enrich metal nanocrystals with new shapes and complex morphologies as well as unprecedented properties and functionalities. The success of this route critically relies on our ability to lift the confinement on symmetry by the underlying unit cell of the crystal structure and/or the initial seed in a systematic manner. This Review aims to provide an account of recent progress in understanding and controlling asymmetrical growth and symmetry breaking in a colloidal synthesis of noble-metal nanocrystals. With a touch on both the nucleation and growth steps, we discuss a number of methods capable of generating seeds with diverse symmetry while achieving asymmetrical growth for mono-, bi-, and multimetallic systems. We then showcase a variety of symmetry-broken nanocrystals that have been reported, together with insights into their growth mechanisms. We also highlight their properties and applications and conclude with perspectives on future directions in developing this class of nanomaterials. It is hoped that the concepts and existing challenges outlined in this Review will drive further research into understanding and controlling the symmetry breaking process.

Gold Nanostar Characterization by Nanoparticle Tracking Analysis

We demonstrate the application of nanoparticle tracking analysis (NTA) for the quantitative characterization of gold nanostars (GNSs). GNSs were synthesized by the seed-mediated growth method using triblock copolymer (TBP) gold nanoparticles (GNPs). These GNPs (≈ 10 nm) were synthesized from Au³⁺ (≈ 1 mM) in aqueous F127 (w/v 5%) containing the co-reductant ascorbic acid (≈ 2 mM). The GNS tip-to-core aspect ratio (AR) decreased when higher concentrations of GNPs were added to the growth solution. The AR dependency of GNSs on Au³⁺/Au(seed) concentration ratio implies that growth is partly under kinetic control. NTA measured GNS sizes, concentrations, and relative scattering intensities. Molar absorption coefficients ∼ 10⁹-10¹⁰ M^-1 cm^-1 (ε_400 nm) for each batch of GNSs were determined using the combination of extinction spectra and NTA concentrations for heterogeneous samples. NTA in combination with UV-vis was used to derive the linear relationships: (1) hydrodynamic size versus localized surface plasmon peak maxima; (2) ε_400 nm versus localized surface plasmon peak maxima; (3) ε_400 nm versus hydrodynamic size. NTA for quantitative characterization of anisotropic nanoparticles could lead to future applications, including heterogeneous colloidal catalysis.

Controlled Synthesis of Carbon-Supported Pt-Based Electrocatalysts for Proton Exchange Membrane Fuel Cells

Proton exchange membrane fuel cells are playing an increasing role in postpandemic economic recovery and climate action plans. However, their performance, cost, and durability are significantly related to Pt-based electrocatalysts, hampering their large-scale commercial application. Hence, considerable efforts have been devoted to improving the activity and durability of Pt-based electrocatalysts by controlled synthesis in recent years as an effective method for decreasing Pt use, and consequently, the cost. Therefore, this review article focuses on the synthesis processes of carbon-supported Pt-based electrocatalysts, which significantly affect the nanoparticle size, shape, and dispersion on supports and thus the activity and durability of the prepared electrocatalysts. The reviewed processes include (i) the functionalization of a commercial carbon support for enhanced catalyst–support interaction and additional catalytic effects, (ii) the methods for loading Pt-based electrocatalysts onto a carbon support that impact the manufacturing costs of electrocatalysts, (iii) the preparation of spherical and nonspherical Pt-based electrocatalysts (polyhedrons, nanocages, nanoframes, one- and two-dimensional nanostructures), and (iv) the postsynthesis treatments of supported electrocatalysts. The influences of the supports, key experimental parameters, and postsynthesis treatments on Pt-based electrocatalysts are scrutinized in detail. Future research directions are outlined, including (i) the full exploitation of the potential functionalization of commercial carbon supports, (ii) scaled-up one-pot synthesis of carbon-supported Pt-based electrocatalysts, and (iii) simplification of postsynthesis treatments. One-pot synthesis in aqueous instead of organic reaction systems and the minimal use of organic ligands are preferred to simplify the synthesis and postsynthesis treatment processes and to promote the mass production of commercial carbon-supported Pt-based electrocatalysts.

Graphical Abstract

This review focuses on the synthesis process of Pt-based electrocatalysts/C to develop aqueous one-pot synthesis at large-scale production for PEMFC stack application.

Synthetic control of the surface area in nickel cobalt oxide for glucose detection via additive-assisted wet chemical method

We investigated the effect of specific surface area on the electrochemical properties of NiCo₂O₄ (NCO) for glucose detection. NCO nanomaterials with controlled specific surface areas were prepared by additive-assisted hydrothermal synthesis, and self-assembled nanostructures with urchin-, pine-needle-, tremella-, and flower-like morphologies were obtained. The novelty of this method is the systematic control of chemical reaction routes assisted by the addition of different additives during synthesis, which results in the spontaneous formation of various morphologies without any difference in the crystal structure and chemical states of the constituent elements. Such morphological control of NCO nanomaterials leads to considerable changes in the electrochemical performance for glucose detection. Combined with materials characterization, the relationship between the specific surface area and the electrochemical performance is discussed for glucose detection. This work can provide scientific insights for tailoring the surface area of nanostructures, which determines their functionality for potential applications in glucose biosensors.

Chiral-Solvent-Mediated Manganese-Based Hierarchical Supraparticles with Chiroptical Activity

In this study, manganese-based multiply hierarchical chiral supraparticles (SPs), with an anisotropy factor (g-factor) of 0.102 and circular dichroism (CD) intensity of 260 mdeg at 530 nm, are successfully synthesized with polar-solvent-mediated strategies. Notably, the g-factor of the SPs is further enhanced to 0.121 by the addition of an external chiral solvent, generating a chiral biased environment, which increases their CD intensity to 320 mdeg at 500 nm. The mechanism underlying the different chirality is proposed to be a difference in the angle of tilt of ±33° between the two enantiomers of the chiral SPs, which involves a difference of ±7° between the orientation of individual nanoplatelets. Chiral solvents induce the angle between adjacent nanoplatelets to get smaller than the original structure that leads to their higher anisotropic value. These findings potentially provide a practical method for the construction of complex chiral superstructures and the regulation of chiroptical activity.

Tug-of-War Driven by the Structure of Carboxylic Acids: Tuning the Size, Morphology, and Photocatalytic Activity of α-Ag2WO4

Size and morphology control during the synthesis of materials requires a molecular-level understanding of how the addition of surface ligands regulates nucleation and growth. In this work, this control is achieved by using three carboxylic acids (tartaric, benzoic, and citric) during sonochemical syntheses. The presence of carboxylic acids affects the kinetics of the nucleation process, alters the growth rate, and governs the size and morphology. Samples synthesized with citric acid revealed excellent photocatalytic activity for the degradation process of Rhodamine B, and recyclability experiments demonstrate that it retains 91% of its photocatalytic activity after four recycles. Scavenger experiments indicate that both the hydroxyl radical and the hole are key species for the success of the transformation. A reaction pathway is proposed that involves a series of dissolution-hydration-dehydration and precipitation processes, mediated by the complexation of Ag⁺. We believe these studies contribute to a fundamental understanding of the crystallization process and provide guidance as to how carboxylic acids can influence the synthesis of materials with controlled size and morphology, which is promising for multiple other scientific fields, such as sensor and catalysis fields.

Effect of Crystal Growth on the Thermodynamic Stability and Oxygen Reduction Reaction Activity of Cu-Pt Nanoparticles

Thermodynamically stable (ordered) platinum-based bimetallic nanoparticle (NP) catalysts are auspicious candidates for catalyzing the oxygen reduction reaction (ORR) in fuel cells. Although the cubic (L1₂) and tetragonal (L1₀) ordered phases have been extensively studied, very little is known about the cubic (D₇) thermally stable/ordered CuPt₇ with regard to its synthesis at room temperature and ORR activity. The typical synthetic approach to the ordered phase (L1₂ and L1₀) has been by thermal annealing of the disordered phase in an inert atmosphere. We demonstrate that by coordinating Cu²⁺ and Pt⁴⁺ ions to amino groups in aqueous polyethyleneimine (PEI) (precursor solution), slow crystal growth by a UV-light assisted photoreduction can be used to achieve ordered CuPt₇ NPs at room temperature. Slow crystal growth produces a relatively expanded lattice (7.766 Å) of CuPt₇ and a lesser ORR activity via a four-electron transfer pathway. Conversely, fast crystal growth through a NaBH₄ assisted chemical reduction produces a disordered CuPt phase at room temperature and a contracted lattice (3.809 Å) that enhances the ORR activity of CuPt via a two-electron transfer pathway. Our comparative observations of CuPt and CuPt₇ support the observation that lattice contraction is critical in the ORR activity of Cu-Pt nanoalloys.

Kinetics-controlled regulation for homogeneous nucleation and growth of colloidal polymer and carbon nanospheres

Size regulation of uniform polymer nanospheres (PNSs) and carbon nanospheres (CNSs) below 100 nm has been difficult and is limited by multiple factors, such as ongoing nucleation, Ostwald ripening, minimization of surface energy, and high viscosity during the nucleation and growth process. In this study, a kinetics-controlled regulation is reported for the synthesis of monodispersed PNSs and corresponding CNSs with adjustable size below 100 nm. During the synthesis of PNSs, three distinct stages including surface energy control, surface tension control and viscosity control have been observed, where the concentration of block copolymer F127 (C_F127) plays a vital role in affecting the nucleation rate of PNSs and tunes the diffusion rate of monomers and migration of particles during the nucleation and growth process. As a consequence, the size of monodisperse CNSs can be customized from 100 nm down to 41 nm with PDI below 5%.