A Reagent for the One-Step Preparation of Potassium Acyltrifluoroborates (KATs) from Aryl- and Heteroarylhalides

Stereoselective Unsymmetrical 1,1-Diborylation of Alkynes with a Neutral sp2 -sp3 Diboron Reagent

The incorporation of two distinct boryl groups at the same carbon center in organic molecules has attracted growing research interest due to its potential for facilitating controlled, precise synthesis through stepwise dual carbon-boron bond transformations. Here we report a method to access unsymmetrical 1,1-diborylalkene (UDBA) stereoselectively via the reaction of readily available alkynes with a neutral sp2 -sp3 diboron reagent (NHC)BH2 -Bpin (NHC=N-heterocyclic carbene). Attributing to the chemically easily distinguishable nature of the sp2 and sp3 boryl moieties, controllable stepwise derivatization of the resultant UDBAs is realized. This process leads to various multifunctionalized olefins and organoborons, such as acylboranes, which are difficult to prepare by other methods.

A Versatile Route to Acyl (MIDA)Boronates

A modular approach to highly functional acyl (MIDA)boronates is described. It involves the generation of the hitherto unknown radical derived from acetyl (MIDA)boronate and its capture by various alkenes, including electronically unbiased, unactivated alkenes. In contrast to the anion of acetyl (MIDA)boronate, which has not so far been employed in synthesis, the corresponding radical is well behaved and readily produced from the novel α-xanthyl acetyl (MIDA)boronate. This shelf-stable, easily prepared solid is a convenient acyl (MIDA)boronate transfer agent that provides a direct entry to numerous otherwise inaccessible structures, including latent 1,4-dicarbonyl derivatives that can be transformed into B(MIDA) substituted pyrroles and furans. A competition experiment indicated the acyl (MIDA)boronate substituted radical to be more stable than the all-carbon acetonyl radical but somewhat less reactive in additions to alkenes.

One-Step Synthesis of Acylborons from Acyl Chlorides through Copper-Catalyzed Borylation with Polystyrene-Supported PPh3 Ligand

We developed a one-step synthesis of acylborons from both readily available acyl chlorides and bis(pinacolato)diboron through copper(I)-catalyzed borylation. Under the reaction conditions using ^tBuOLi, polystyrene-supported triphenylphosphine as a copper ligand was found to promote the borylation of acyl chlorides while suppressing alcoholysis. This method enables the facile synthesis of potassium acyltrifluoroborates.

Copper-Catalyzed Borylation of Acyl Chlorides with an Alkoxy Diboron Reagent: A Facile Route to Acylboron Compounds

Herein, the copper-catalyzed borylation of readily available acyl chlorides with bis(pinacolato)diboron, (B2 pin2 ) or bis(neopentane glycolato)diboron (B2 neop2 ) is reported, which provides stable potassium acyltrifluoroborates (KATs) in good yields from the acylboronate esters. A variety of functional groups are tolerated under the mild reaction conditions (room temperature) and substrates containing different carbon-skeletons, such as aryl, heteroaryl and primary, secondary, tertiary alkyl are applicable. Acyl N-methyliminodiacetic acid (MIDA) boronates can also been accessed by modification of the workup procedures. This process is scalable and also amenable to the late-stage conversion of carboxylic acid-containing drugs into their acylboron analogues, which have been challenging to prepare previously. A catalytic mechanism is proposed based on in situ monitoring of the reaction between p-toluoyl chloride and an NHC-copper(I) boryl complex as well as the isolation of an unusual lithium acylBpinOBpin compound as a key intermediate.

Preparation of Potassium Acyltrifluoroborates (KATs) from Carboxylic Acids by Copper-Catalyzed Borylation of Mixed Anhydrides

We report the preparation of potassium acyltrifluoroborates (KATs) from widely available carboxylic acids. Mixed anhydrides of carboxylic acids were prepared using isobutyl chloroformate and transformed to the corresponding KATs using a commercial copper catalyst, B₂ (pin)₂ , and aqueous KHF₂ . This method allows for the facile preparation of aliphatic, aromatic, and amino acid-derived KATs and is compatible with a variety of functional groups including alkenes, esters, halides, nitriles, and protected amines.

Mechanism-Based Design of Quinoline Potassium Acyltrifluoroborates for Rapid Amide-Forming Ligations at Physiological pH

Potassium acyltrifluoroborates (KATs) undergo chemoselective amide-forming ligations with hydroxylamines. Under aqueous, acidic conditions these ligations can proceed rapidly, with rate constants of ∼20 M^-1 s^-1. The requirement for lower pH to obtain the fastest rates, however, limits their use with certain biomolecules and precludes in vivo applications. By mechanistic investigations into the KAT ligation, including kinetic studies, X-ray crystallography, and DFT calculations, we have identified a key role for a proton in accelerating the ligation. We applied this knowledge to the design and synthesis of 8-quinolyl acyltrifluoroborates, a new class of KATs that ligates with hydroxylamines at pH 7.4 with rate constants >4 M^-1 s^-1. We trace the enhanced rate at physiological pH to unexpectedly high basicity of the 8-quinoline-KATs, which leads to their protonation even under neutral conditions. This proton assists the formation of the key tetrahedral intermediate and activates the leaving groups on the hydroxylamine toward a concerted 1,2-BF₃ shift that leads to the amide product. We demonstrate that the fast ligations at pH 7.4 can be carried out with a protein substrate at micromolar concentrations.

Acylboronates in Polarity-Reversed Generation of Acyl Palladium(II) Intermediates

We report a catalytic cross-coupling process between aryl (pseudo)halides and boron-based acyl anion equivalents. This mode of acylboronate reactivity represents polarity reversal, which is supported by the observation of tetracoordinated boronate and acyl palladium(II) species by ¹¹B, ³¹P NMR, and mass spectrometry. A broad scope of aliphatic and aromatic acylboronates has been examined, as well as a variety of aryl (pseudo)halides.

Rapid Access to Diverse Potassium Acyltrifluoroborates (KATs) through Late-Stage Chemoselective Cross-Coupling Reactions

Potassium acyltrifluoroborates (KATs) are opening up new avenues in chemical biology, materials science, and synthetic organic chemistry due to their intriguing reactivities. However, the synthesis of these compounds remains mostly complicated and time-consuming. Herein, we have developed chemoselective Pd-catalyzed approaches for the late-stage diversification of arenes bearing prefunctionalized KATs. These approaches feature chemoselective cross-coupling, rapid diversification, functional group tolerance, mild reaction conditions, simple operation, and high yields.

Catalytic Synthesis of Potassium Acyltrifluoroborates (KATs) from Boronic Acids and the Thioimidate KAT Transfer Reagent

We report the synthesis of potassium acyltrifluoroborates (KATs) by a palladium-catalyzed cross-coupling of boronic acids and the thioimidate KAT transfer reagent. The combination of widely available aryl- and vinylboronic acids with commercially available thioimidate 1 using catalytic Pd^II and a Cu^II additive enables the preparation of KATs in high yields and with good functional group tolerance. This formal insertion of CO into organoboronic acids can also be applied to boronic acid pinacol esters and potassium organotrifluoroborates using a slightly modified procedure. The cross-coupling can be telescoped into the one-pot synthesis of amides and α-aminotrifluoroborates by exploiting the unique chemistry of KATs and their trifluoroborate iminium (TIM) derivatives.

One-Step Synthesis of Acylboron Compounds via Copper-Catalyzed Carbonylative Borylation of Alkyl Halides*

A copper-catalyzed carbonylative borylation of unactivated alkyl halides has been developed, enabling efficient synthesis of aliphatic potassium acyltrifluoroborates (KATs) in high yields by treating the in situ formed tetracoordinated acylboron intermediates with aqueous KHF₂ . A variety of functional groups are tolerated under the mild reaction conditions, and primary, secondary, and tertiary alkyl halides are all applicable. In addition, this method also provides facile access to N-methyliminodiacetyl (MIDA) acylboronates as well as α-methylated potassium acyltrifluoroborates in a one-pot manner. Mechanistic studies indicate a radical atom transfer carbonylation (ATC) mechanism to form acyl halide intermediates that are subsequently borylated by (NHC)CuBpin.

Formyl MIDA Boronate: C1 Building Block Enables Straightforward Access to α-Functionalized Organoboron Derivatives

Formyl MIDA boronate has been known to be an elusive type of acylboronate that has not been obtained to date. In this work, an approach to the one-pot preparation and chemical transformations of formyl MIDA boronate were developed to provide new types of α-functionalized organoboron compounds. Among them are acylboronate reagents which present boron-substituted analogues of ynones and β-dicarbonyl compounds. The developed synthetic procedures, utilizing formyl MIDA boronate, are tolerant to diverse functional groups, making this reagent an advantageous C₁ building block for extending the scope of organoboron chemistry.

Synthesis of Acylboron Compounds

Acylboron compounds are emerging as versatile functional groups with applications in multiple research fields. Their synthesis, however, is still challenging and requires innovative methods. This Minireview provides an overview on the obstacles of acylboron synthesis and highlights notable advances within the last three years on new strategies to overcome the challenges posed by the formation of acyl-boron bonds.

Boramidine: A Versatile Structural Motif for the Design of Fluorescent Heterocycles

Sodium cyanoborohydride-derived N-alkylnitriliumboranes were found to be versatile precursors for the synthesis of novel boron-containing heterocycles. The reaction between N-alkylnitriliumboranes and 2-aminopyridines, imidazoles, oxazoles, or isoxazoles leads to the incorporation of the [B-C] motif into a five-membered boramidine, which exists as a mixture of Z and E isomers. The resulting heterocycles are blue fluorescent in both the solid state and in solution with ca. 2700-8400 cm^-1 Stokes shifts and quantum yields in the 65-74% range in water and in the 42-84% range in organic solvents. The combination of photophysical properties, structural tunability, stability, and solubility in various media is expected to find application in a range of disciplines.

Recent Advances in the Synthesis of Acylboranes and Their Widening Applicability

The most common types of acylboranes are acyltrifluoroborates, acyl MIDA-boronates, and monofluoroacylboronates. Because of the increasing importance of these compounds in the past decade, we highlight the recently reported synthetic strategies to access acylboranes. In addition, an expanding array of their applications has been discovered, based on either the ability of acylboranes to enter rapid amide-forming ligations or the retained ketone-like character of the carbonyl group. Therefore, we also describe ground-breaking achievements where acylboranes were successfully put to use, such as their utility in biochemical, material, and medicinal sciences.

Synthesis of secondary and tertiary amides without coupling agents from amines and potassium acyltrifluoroborates (KATs)

Although highly effective for most amide syntheses, the activation of carboxylic acids requires the use of problematic coupling reagents and is often poorly suited for challenging cases such as N-methyl amino acids. As an alternative to both secondary and tertiary amides, we report their convenient synthesis by the rapid oxidation of trifluoroborate iminiums (TIMs). TIMs are easily prepared by acid-promoted condensation of potassium acyltrifluoroborates (KATs) and amines and are cleanly and rapidly oxidized to amides with hydrogen peroxide. The overall transformation can be conducted either as a one-pot procedure or via isolation of the TIM. The unique nature of the neutral, zwitterionic TIMs makes possible the preparation of tertiary amides via an iminium species that would not be accessible from other carbonyl derivatives and can be conducted in the presence of unprotected functional groups including acids, alcohols and thioethers. In preliminary studies, this approach was applied to the late-stage modifications of long peptides and the iterative synthesis of short, N-methylated peptides without the need for coupling agents.

Oxidative amidation of potassium acyltrifluoroborates (KATs) and amines via trifluoroborate iminiums (TIMs) delivers amides without coupling agents. This unusual approach to amides can be applied for the late-stage modification of bioactive molecules and for solid-phase peptide synthesis.

Diversity-Oriented Synthesis of α-Functionalized Acylborons and Borylated Heteroarenes by Nucleophilic Ring Opening of α-Chloroepoxyboronates

The ring-opening reactions of N-methyliminodiacetyl (MIDA) α-chloroepoxyboronates with different nucleophiles allow the modular synthesis of a diverse array of organoboronates. These include seven types of α-functionalized acylboronates and seven types of borylated heteroarenes, some of which are difficult-to-access products using alternative methods. The common synthons, α-chloroepoxyboronates, could be viably synthesized by a two-step procedure from the corresponding alkenyl MIDA boronates. Mild reaction conditions, good functional-group tolerance, and generally good efficiency were observed. The utility of the products was also demonstrated.

Catalytic Synthesis of Potassium Acyltrifluoroborates (KATs) through Chemoselective Cross-Coupling with a Bifunctional Reagent

Potassium acyltrifluoroborates (KATs) are increasingly important functional groups, and general methods for their preparation are of great current interest. We report a bifunctional iminium reagent bearing both a tin nucleophile and a trifluoroborate, which was applied in chemoselective Pd⁰ -catalyzed Migita-Kosugi-Stille cross-coupling reactions owith aryl and vinyl halides. This method gives access to previously inaccessible aromatic and α,β-unsaturated acyltrifluoroborates, including precursors to amino-acid derived KATs.

A modular and concise approach to MIDA acylboronates via chemoselective oxidation of unsymmetrical geminal diborylalkanes: unlocking access to a novel class of acylborons

Novel and mild synthesis of MIDA acylboronates including a novel class of acylborons and first chemoselective oxidation of geminal diborylalkanes.

Acylboronates represent a very intriguing and rare class of organoboronates. Synthesis of these compounds from readily available substrates under mild conditions and access to novel classes of acylborons has been challenging. We report a novel and concise route to various MIDA acylboronates from terminal alkynes/alkenes or vinyl boronic esters using unsymmetrical geminal diborylalkanes as key intermediates. The high modularity and mild conditions of this strategy allowed a facile access to acylboronates possessing aliphatic, aromatic as well as the rarer heteroaromatic, alkynyl and α,β-unsaturated scaffolds. To the best of our knowledge, this is the first report of chemoselective oxidation of geminal diborons as well as synthesis of an α,β-unsaturated acylboronate.

Concise Synthesis of Potassium Acyltrifluoroborates from Aldehydes through Copper(I)-Catalyzed Borylation/Oxidation

Potassium acyltrifluoroborates (KATs) were prepared through copper(I)-catalyzed borylation of aldehydes and subsequent oxidation. This synthetic route is characterized by the wide range of aldehydes accessible, favorable step economy, mild reaction conditions, and tolerance of various functional groups, and it enables the facile generation of a range of KATs, for example, bearing halide, sulfide, acetal, or ester moieties. Moreover, this method was applied to the three-step synthesis of various α-amino acid analogues that bear a KAT moiety on the C-terminus by using naturally occurring amino acids as the starting material.

Synthesis of aminoboronic acid derivatives: an update on recent advances

Aminoboronic acids and their derivatives are particularly useful as drugs, probes and synthons. Recent developments in their synthesis are highlighted.

PEGylation and Dimerization of Expressed Proteins under Near Equimolar Conditions with Potassium 2-Pyridyl Acyltrifluoroborates

The covalent conjugation of large, functionalized molecules remains a frontier in synthetic chemistry, as it requires rapid, chemoselective reactions. The potassium acyltrifluoroborate (KAT)-hydroxylamine amide-forming ligation shows promise for conjugations of biomolecules under aqueous, acidic conditions, but the variants reported to date are not suited to ligations at micromolar concentrations. We now report that 2-pyridyl KATs display significantly enhanced ligation kinetics over their aryl counterparts. Following their facile, one-step incorporation onto the termini of polyethylene glycol (PEG) chains, we show that 2-pyridyl KATs can be applied to the construction of protein-polymer conjugates in excellent (>95%) yield. Four distinct expressed, folded proteins equipped with a hydroxylamine could be PEGylated with 2-20 kDa 2-pyridyl mPEG KATs in high yield and with near-equimolar amounts of coupling partners. Furthermore, the use of a bis 2-pyridyl PEG KAT enables the covalent homodimerization of proteins with good conversion. The 2-pyridyl KAT ligation offers an effective alternative to conventional protein-polymer conjugation by operating under aqueous acidic conditions well suited for the handling of folded proteins.

Substitution of fluorine in M[C6F5BF3] with organolithium compounds: distinctions between O- and N-nucleophiles

Borates M[C₆F₅BF₃] (M = K, Li, Bu₄N) react with organolithium compounds, RLi (R = Me, Bu, Ph), in 1,2-dimethoxyethane or diglyme to give M[4-RC₆F₄BF₃] and M[2-RC₆F₄BF₃]. When R is Me or Bu, the nucleophilic substitution of the fluorine atom at the para position to boron is the predominant route. When R = Ph, the ratio M[4-RC₆F₄BF₃]/M[2-RC₆F₄BF₃] is ca. 1:1. Substitution of the fluorine atom at the ortho position to boron is solely caused by the coordination of RLi via the lithium atom with the fluorine atoms of the BF₃ group. This differs from the previously reported substitution in K[C₆F₅BF₃] by O- and N-nucleophiles that did not produce K[2-NuC₆F₄BF₃].

Chemoselective Acylation of Primary Amines and Amides with Potassium Acyltrifluoroborates under Acidic Conditions

Current methods for constructing amide bonds join amines and carboxylic acids by dehydrative couplings-processes that usually require organic solvents, expensive and often dangerous coupling reagents, and masking other functional groups. Here we describe an amide formation using primary amines and potassium acyltrifluoroborates promoted by simple chlorinating agents that proceeds rapidly in water. The reaction is fast at acidic pH and tolerates alcohols, carboxylic acids, and even secondary amines in the substrates. It is applicable to the functionalization of primary amides, sulfonamides, and other N-functional groups that typically resist classical acylations and can be applied to late-stage functionalizations.

Acylboranes: synthetic strategies and applications

Acylboranes are an attractive class of compounds, of which the synthesis has very recently been documented as summarised in this review. Access to these compounds provides a path to study their properties and reactivity.

Synthesis of Aminoboronic Acid Derivatives from Amines and Amphoteric Boryl Carbonyl Compounds

Herein, we demonstrate the use of α-boryl aldehydes and acyl boronates in the synthesis of aminoboronic acid derivatives. This work highlights the untapped potential of boron-substituted iminium ions and offers insights into the behavior of N-methyliminodiacetyl (MIDA) boronates during condensation and tautomerization processes. The preparative value of this contribution lies in the demonstration that various amines, including linear and cyclic peptides, can be readily conjugated with boron-containing fragments. A mild deprotection of amino MIDA-boronates enables access to α- and β-aminoboronic acids in high chemical yields. This simple process should be applicable to the synthesis of a wide range of bioactive molecules as well as precursors for cross-coupling reactions.

Synthesis and reactivities of monofluoro acylboronates in chemoselective amide bond forming ligation with hydroxylamines

Synthesis and reactivities of monofluoroacylboronates are described in the context of bioorganic chemistry and chemical ligation.