A Fluorescence Nanosensor for Glycoproteins with Activity Based on the Molecularly Imprinted Spatial Structure of the Target and Boronate Affinity

Chronopotentiometric Nanopore Sensor Based on a Stimulus-Responsive Molecularly Imprinted Polymer for Label-Free Dual-Biomarker Detection

The development of sensors for detection of biomarkers exhibits an exciting potential in diagnosis of diseases. Herein, we propose a novel electrochemical sensing strategy for label-free dual-biomarker detection, which is based on the combination of stimulus-responsive molecularly imprinted polymer (MIP)-modified nanopores and a polymeric membrane chronopotentiometric sensor. The ion fluxes galvanostatically imposed on the sensing membrane surface can be blocked by the recognition reaction between the target biomarker in the sample solution and the stimulus-responsive MIP receptor in the nanopores, thus causing a potential change. By using two external stimuli (i.e., pH and temperature), the recognition abilities of the stimulus-responsive MIP receptor can be effectively modulated so that dual-biomarker label-free chronopotentiometric detection can be achieved. Using alpha fetoprotein (AFP) and prostate-specific antigen (PSA) as model biomarkers, the proposed sensor offers detection limits of 0.17 and 0.42 ng/mL for AFP and PSA, respectively.

In situ digestion-assisted multi-template imprinted nanoparticles for efficient analysis of protein phosphorylation

A new general approach called in situ digestion-assisted multi-template imprinting is proposed for preparation of phospho-specific molecularly imprinted nanoparticles. Through the novel templating strategy and controllable imprinting process, imprinted nanoparticles specific to the intact phosphoprotein and its phosphopeptides were synthesized. The prepared imprinted nanoparticles exhibited excellent specificity (cross reactivity < 10%), high affinity (10-6 M), high efficiency (47.5%), and good generality (both intact phosphoprotein and phosphopeptides). We also realized the fine tuning of the recognition at peptide level of the imprinted nanoparticles by adjusting the imprinting time. Based on the selective enrichment of the imprinted nanoparticles, the MS identification of both the intact phosphoprotein (Tau) and phosphopeptides (angiotensin II and peptides of Tau) in real complex samples could be achieved. Therefore, we believe that the in situ digestion-assisted multi-template imprinting strategy holds promising future in both phosphorylation analysis and proteomics applications.

Electrochemically Controlled Atom Transfer Radical Polymerization for Electrochemical Aptasensing of Tumor Biomarkers

Tumor biomarkers are of great value in the liquid biopsy of malignant tumors. In this work, a simple and cost-friendly electrochemical aptasensor was presented for the highly sensitive and selective detection of glycoprotein tumor biomarkers. The DNA aptamer-modified electrode was used as the sensing interface to specifically capture the target glycoprotein tumor biomarkers, to which the alkyl halide initiators for atom transfer radical polymerization (ATRP) were then attached via the esterification crosslinking between the boronic acid group and the cis-dihydroxyl sites of the conjugated oligosaccharide chains on glycoprotein tumor biomarkers followed by the growth of long-chain polymers through electrochemically controlled ATRP (eATRP) to efficiently recruit the ferrocene detection tags. As there are tens to hundreds of cis-dihydroxyl sites on a glycoprotein tumor biomarker for attaching ATRP initiators while each long-chain polymer can recruit hundreds to thousands of ferrocene detection tags, a significantly high current signal can be generated even in the presence of ultralow-abundance targets. Hence, the eATRP-based electrochemical aptasensor is capable of sensitively and selectively detecting glycoprotein tumor biomarkers. Using alpha-fetoprotein as the model target, the limit of detection was demonstrated to be 0.32 pg/mL. Moreover, the aptasensor has been successfully applied to detect glycoprotein tumor biomarkers in human serum samples. In view of its high sensitivity and selectivity, simple operation, and cost-friendliness, the eATRP-based electrochemical aptasensor shows great promise in the glycoprotein-based liquid biopsy of malignant tumors, even at the early stage of development.

Biological Sample-Compatible Ratiometric Fluorescent Molecularly Imprinted Polymer Microspheres by RAFT Coupling Chemistry

Ratiometric fluorescent molecularly imprinted polymer (MIP) sensors hold great promise in many bioanalytical areas because of their high sensitivity and selectivity as well as excellent self-referencing and visual detection capability. However, their synthetic strategies are rather limited and the development of such optosensing MIPs that can directly and selectively quantify small organic analytes in complex biological samples remains a formidable challenge owing to the complexity of sample matrices. Herein, a versatile and modular strategy to obtaining well-defined ratiometric fluorescent MIP microspheres capable of directly and selectively detecting an organic herbicide [2,4-dichlorophenoxyacetic acid (2,4-D)] in undiluted pure milks is described. First, it involves the synthesis of uniform "living" polymer particles via RAFT precipitation polymerization, their successive well-controlled grafting of a polymer shell labeled with red CdTe QDs (being inert to 2,4-D) and an MIP shell labeled with green 4-nitrobenzo[c][1,2,5]oxadiazole (NBD) units (showing fluorescence "light-up" upon binding 2,4-D) via surface-initiated RAFT polymerization, and final grafting of hydrophilic poly(N-isopropylacrylamide) brushes via an efficient coupling reaction (i.e., RAFT coupling chemistry). The resulting hydrophilic dual fluorescent MIP particles showed excellent photostability and reusability. They exhibited obvious analyte binding-induced "turn-on"-type ratiometric fluorescence (and color) change and high 2,4-D optosensing selectivity and sensitivity in pure bovine milk (with a detection limit of 0.13 μM). Moreover, they were directly applied to 2,4-D determination in undiluted pure goat milk with good recoveries (96.0-103.2%) and high accuracy (RSD = 1.5-5.5%), even in the presence of several analogues of 2,4-D. The general applicability of our strategy was also demonstrated. This study paves the way for efficiently developing various advanced MIP optosensors (of easily tunable structures and desired properties) highly promising in many bioanalytical applications.

Ultra-sensitive viral glycoprotein detection NanoSystem toward accurate tracing SARS-CoV-2 in biological/non-biological media

Rapid person-to-person transfer of viruses such as SARS-CoV-2 and their occasional mutations owing to the human activity and climate/ecological changes by the mankind led to creation of wrecking worldwide challenges. Such fast transferable pathogens requiring practical diagnostic setups to control their transfer chain and stop sever outbreaks in early stages of their appearance. Herein, we have addressed this urgent demand by designing a rapid electrochemical diagnostic kit composed of fixed/screen printed electrodes that can detect pathogenic viruses such as SARS-CoV-2 and/or animal viruses through the differentiable fingerprint of their viral glycoproteins at different voltage positions. The working electrode of developed sensor is activated upon coating a layer of coupled graphene oxide (GO) with sensitive chemical compounds along with gold nanostars (Au NS) that can detect the trace of viruses in any aquatic biological media (e.g., blood, saliva and oropharyngeal/nasopharyngeal swab) through interaction with active functional groups of their glycoproteins. The method do not require any extraction and/or biomarkers for detection of target viruses and can identify trace of different pathogenic viruses in about 1 min. The nanosensor also demonstrated superior limit of detection (LOD) and sensitivity of 1.68 × 10⁻²² μg mL⁻¹ and 0.0048 μAμg.mL⁻¹. cm⁻², respectively, toward detection of SARS-CoV-2 in biological media, while blind clinical evaluations of 100 suspected samples furtherly confirmed the superior sensitivity/specificity of developed nanosystem toward rapid identification of ill people even at incubation and prodromal periods of illness.

A nanosensor based on graphene and gold nanostars was developed toward detection of viruses

The developed nanosensor detected diverse viruses through their viral glycoproteins

The nanosensor showed different fingerprints for each examined virus

The nanosensor detected the SARS-CoV-2 with high accuracy and low DL

Molecularly Imprinted Nanogels Capable of Porcine Serum Albumin Detection in Raw Meat Extract for Halal Food Control

Accurate, simple, and valuable analytical methods for detection of food contamination are rapidly expanding to evaluate the validity of food product quality because of ethnic considerations and food safety. Herein molecularly imprinted nanogels (MIP-NGs), capable of porcine serum albumin (PSA) recognition, were prepared as artificial molecular recognition elements. The MIP-NGs were immobilized on a quartz crystal microbalance (QCM) sensor for detection of pork contamination in real beef extract samples. The MIP-NGs-based QCM sensor showed high affinity and excellent selectivity toward PSA compared to reference serum albumins from five different animals. The high PSA specificity of MIP-NGs led to the detection of pork contamination with a detection limit of 1% (v/v) in real beef extract samples. We believe the artificial molecular recognition materials prepared by molecular imprinting are a promising candidate for halal food control.

Fluorescent Labelling of Glycans with FRET-Based Probes in a Gold(III)-Mediated Three-Component Coupling Reaction

Single-site multifunctionalization of glycans is of importance in biological studies considering its crucial role in mediating biological events and human diseases. In this paper, a novel approach for multifunctional labelling of glycans has been developed featuring the use of fluorescence resonance energy transfer-based (FRET-based) probes for fluorescent labelling of glycans through a gold(III)-mediated three-component coupling reaction. Oxidation of glycans into aldehydes followed by the A³ -coupling reaction with FRET-based probes resulted in the single-site formation of fluorescent propargylamine products. The conversion of labelled glycans can be revealed by ratiometric analysis of the FRET signals. This labelling approach results in multifunctionalization of glycans with high selectivity and conversion between 66 and 69 %.

Organic Boronate Affinity Sorbent for Capture of cis-Diol Containing Compounds Eman Alzahrani

Boronate affinity chromatography (BAC) is argued to be a critical tool in specific capture and separation of cis-diol containing compounds. In present study, organic boronate affinity monolith poly(3-acrylamido phenylboronic acid-co-ethylene dimethacrylate) (AAPBA-co-EDMA) is prepared through one-step in situ polymerization procedure within a micropipette through the application of a pre-polymerization mixture which contains functional monomer (3-acrylamido phenylboronic acid), cross-linker (ethylene dimethacrylate), porogenic solvent (methanol with poly ethylene glycol) and initiator (2,2-dimethoxy-2-phenyl-acetophenone). Following the optimization of time exposure to UV lamp with 365 nm, the macroporous organic boronate monolith was selected. Several approaches including SEM and BET analysis, FT-IR spectroscopy and measuring contact angle were applied in the characterization of the morphology of the monolith. Several cis-diol compounds that include catechol and galactose are applied in the assessment of the boronate affinity of the organic monolithic material. Additionally, the capture of glucose from urine sample is also conducted. The basic principle of the approach is that boronic acid forms covalent bond with cis-diols in basic solutions whereas the ester bonds are dissociated under acidic media. By using the study results, monolith demonstrate good selectivity towards cis-diol containing compounds. Due to the hydrophilic property of monolith, the affinity chromatography monolith can be performed for several cis-diol compounds including glycoproteins and nucleosides. Also, fabrication of the organic boronate monolithic in microfluidic equipment is essential in facilitating the extraction of boronate affinity using small-volume samples.

Molecular Imprinting with Functional DNA

Molecular imprinting refers to templated polymerization with rationally designed monomers, and this is a general method to prepare stable and cost-effective ligands. This attractive concept however suffers from low affinity, low specificity, and limited signaling mechanisms for binding. Acrydite-modified DNA oligonucleotides can be readily copolymerized into acrylic polymers. With molecular recognition and catalytic functions, such functional DNAs are recently shown to enhance the performance of molecularly imprinted polymers (MIPs) in a few ways. First, DNA aptamers are used as macromonomers to enhance binding affinity and specificity of MIPs. Second, DNA can help produce optical signals to follow binding events. Third, imprinting can also improve the performance of catalytic DNA by enhancing its activity and specificity toward the template substrate. Finally, MIP is shown to help aptamer selection. Bulk imprinting, nanoparticle imprinting, and surface imprinting are all demonstrated with DNA. Since both DNA and synthetic polymers are cost effective and stable, their hybrid materials still possess such properties while enhancing the function of each component. This review covers recent developments on the abovementioned aspects of DNA-containing MIPs, a field just emerged in the last five years, and future research directions are discussed toward the end.

Specific recognition of proteins and peptides via controllable oriented surface imprinting of boronate affinity-anchored epitopes

Molecularly imprinted polymers (MIPs) are chemically synthesized materials mimicking the recognition of antibodies towards antigens. Epitope imprinting has been an effective strategy, making imprinting of proteins flexible to a great extent. However, so far there is apparently a lack of facile and versatile epitope imprinting approaches. Herein, we present a new method called controllable oriented surface imprinting of boronate affinity-anchored epitopes. In this method, a C-terminus nonapeptide epitope was glycated and anchored as a template onto a boronic acid-functionalized substrate, followed by controllable oriented surface imprinting via the polycondensation of multiple silylating reagents containing functionalities capable of interacting with the epitope. The developed imprinting approach allowed for precise control of the thickness of the imprinting layer through adjusting the imprinting time, generating excellent binding properties. This method was verified to be versatile and efficient. Thus, it could greatly facilitate the preparation of MIPs for specific recognition of proteins and peptides.

Orientationally Fabricated Zwitterionic Molecularly Imprinted Nanocavities for Highly Sensitive Glycoprotein Recognition

Glycoprotein recognition has recently gained a lot of attention, since glycoproteins play important roles in a diverse range of biological processes. Robustly synthesized glycoprotein receptors, such as molecularly imprinted polymers (MIPs), which can be easily and sustainably handled, are highly attractive as antibody substitutes because of the difficulty in obtaining high-affinity antibodies specific for carbohydrate-containing antigens. Herein, molecularly imprinted nanocavities for glycoproteins have been fabricated via a bottom-up molecular imprinting approach using surface-initiated atom transfer radical polymerization (SI-ATRP). As a model glycoprotein, ovalbumin was immobilized in a specific orientation onto a surface plasmon resonance sensor chip by forming a conventional cyclic diester between boronic acid and cis-diol. Biocompatible polymer matrices were formed around the template molecule, ovalbumin, using SI-ATRP via a hydrophilic comonomer, 2-methacryloyloxyethyl phosphorylcholine, in the presence of pyrrolidyl acrylate (PyA), a functional monomer capable of electrostatically interacting with ovalbumin. The removal of ovalbumin left MIPs with binding cavities containing boronic acid and PyA residues located at suitable positions for specifically binding ovalbumin. Careful analysis revealed that strict control over the polymer significantly improved sensitivity and selectivity for ovalbumin recognition, with a limit of detection of 6.41 ng/mL. Successful detection of ovalbumin in an egg white matrix was demonstrated to confirm the practical utility of this approach. Thus, this strategy of using a polymer-based recognition of a glycoprotein through molecularly imprinted nanocavities precisely prepared using a bottom-up approach provides a potentially powerful approach for detection of other glycoproteins.

Towards Detection of Glycoproteins Using Molecularly Imprinted Nanoparticles and Boronic Acid-Modified Fluorescent Probe

Glycoproteins represent a group of important biomarkers for cancer and other life-threatening diseases. Selective detection of specific glycoproteins is an important step for early diagnosis. Traditional glycoprotein assays are mostly based on lectins, antibodies, and enzymes, biochemical reagents that are costly and require special cold chain storage and distribution. To address the shortcomings of the existing glycoprotein assays, we propose a new approach using protein-imprinted nanoparticles to replace the traditional lectins and antibodies. Protein-imprinted binding sites were created on the surface of silica nanoparticles by copolymerization of dopamine and aminophenylboronic acid. The imprinted nanoparticles were systematically characterized by dynamic light scattering, scanning and transmission electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, and elemental analysis. A boronic acid-modified fluorescent probe was used to detect the target glycoprotein captured by the imprinted nanoparticles. Using horseradish peroxidase as a model glycoprotein, we demonstrated that the proposed method can be applied to detect target protein containing multiple glycosylation sites. Because of their outstanding stability and low cost, imprinted nanoparticles and synthetic probes are attractive replacements of traditional biochemical reagents to develop simpler, faster, and more cost-effective analytical methods for glycoproteins.

Glucose-Responsive Trehalose Hydrogel for Insulin Stabilization and Delivery

Effective delivery of therapeutic proteins is important for many biomedical applications. Yet, the stabilization of proteins during delivery and long-term storage remains a significant challenge. Herein, a trehalose-based hydrogel is reported that stabilizes insulin to elevated temperatures prior to glucose-triggered release. The hydrogel is synthesized using a polymer with trehalose side chains and a phenylboronic acid end-functionalized 8-arm poly(ethylene glycol) (PEG). The hydroxyls of the trehalose side chains form boronate ester linkages with the PEG boronic acid cross-linker to yield hydrogels without any further modification of the original trehalose polymer. Dissolution of the hydrogel is triggered upon addition of glucose as a stronger binder to boronic acid (Kb = 2.57 vs 0.48 m-1 for trehalose), allowing the insulin that is entrapped during gelation to be released in a glucose-responsive manner. Moreover, the trehalose hydrogel stabilizes the insulin as determined by immunobinding after heating up to 90 °C. After 30 min heating, 74% of insulin is detected by enzyme-linked immunosorbent assay in the presence of the trehalose hydrogel, whereas only 2% is detected without any additives.

Thermosensitive Metal Chelation Dual-Template Epitope Imprinting Polymer Using Distillation-Precipitation Polymerization for Simultaneous Recognition of Human Serum Albumin and Transferrin

A new type of thermosensitive dual-template epitope molecular imprinting polymer was prepared and coated on magnetic carbon nanotubes (MCNTs@D-EMIP) for simultaneous recognition of human serum albumin (HSA) and transferrin (Trf) via the strategies of dual-template epitope imprinting, metal chelation imprinting, and distillation-precipitation polymerization (DPP). C-terminal peptides of HSA and C-terminal peptides of Trf were selected as templates, zinc acrylate and N-isopropylacrylamide were used as functional monomers, and MCNTs@D-EMIP was prepared by the method of DPP. The two types of template epitopes were immobilized by metal chelation and six-membered ring formed with zinc acylate. MCNTs@D-EMIP was prepared in only 30 min, which was much shorter than other polymerization methods. The resultant MCNTs@D-EMIP showed excellent specific recognition ability toward HSA and Trf. The adsorption amounts of MCNTs@D-EMIP for HSA and Trf were 103.67 and 68.48 mg g^-1 and the imprinting factors were 2.57 and 2.17, respectively. In addition, MCNTs@D-EMIP displayed a thermosensitive property to realize temperature-controlled recognition and release of target proteins. Furthermore, the results of high-performance liquid chromatography analysis proved that MCNTs@D-EMIP could be applied to specifically recognize two types of targets simultaneously in the biosample. The proposed strategy provided a preparation method for the thermosensitive dual-template epitope imprinting polymer via dual-template imprinting, metal chelation imprinting, and DPP.

Transferrin-navigation Nano Artificial Antibody Fluorescence Recognition of Circulating Tumor Cells

Specific recognition of circulating tumor cells (CTCs) is of great significance for cancer diagnosis and personalized therapy. The antibodies and aptamer are commonly used for recognition of CTCs, but they often suffer from low stability and high cost. Therefore, chemically stable and low-cost artificial recognition elements are still highly demanded. Herein, we prepared nano artificial antibody based on molecular imprinting and applied for fluorescence recognition of CTCs. Surface imprinting was employed to construct a transferrin (TRA)-imprinted layer on the surface of rhodamine doped silica nanoparticles. Take advantage of the specific interaction between TRA and TRA receptor (overexpressed on cancer cells), the as-prepared TRA-imprinted artificial antibody was allowed for specific targeting cancer cells mediated by TRA. And the average recognition efficiency of the artificial antibody for the cancer cells was 88% through flow cytometry. Finally, the nano artificial antibody was successfully applied to specific identify mimetic CTCs, under the same conditions, the recognition ability of artificial antibody for CTCs was 8 times higher than the white blood cells.

Ultrasensitive Electrochemical Detection of Glycoprotein Based on Boronate Affinity Sandwich Assay and Signal Amplification with Functionalized SiO2@Au Nanocomposites

Herein we propose a multiple signal amplification strategy designed for ultrasensitive electrochemical detection of glycoproteins. This approach introduces a new type of boronate-affinity sandwich assay (BASA), which was fabricated by using gold nanoparticles combined with reduced graphene oxide (AuNPs-GO) to modify sensing surface for accelerating electron transfer, the composite of molecularly imprinted polymer (MIP) including 4-vinylphenylboronic acid (VPBA) for specific capturing glycoproteins, and SiO₂ nanoparticles carried gold nanoparticles (SiO₂@Au) labeled with 6-ferrocenylhexanethiol (FcHT) and 4-mercaptophenylboronic acid (MPBA) (SiO₂@Au/FcHT/MPBA) as tracing tag for binding glycoprotein and generating electrochemical signal. As a sandwich-type sensing, the SiO₂@Au/FcHT/MPBA was captured by glycoprotein on the surface of imprinting film for further electrochemical detection in 0.1 M PBS (pH 7.4). Using horseradish peroxidase (HRP) as a model glycoprotein, the proposed approach exhibited a wide linear range from 1 pg/mL to 100 ng/mL, with a low detection limit of 0.57 pg/mL. To the best of our knowledge, this is first report of a multiple signal amplification approach based on boronate-affinity molecularly imprinted polymer and SiO₂@Au/FcHT/MPBA, exhibiting greatly enhanced sensitivity for glycoprotein detection. Furthermore, the newly constructed BASA based glycoprotein sensor demonstrated HRP detection in real sample, such as human serum, suggesting its promising prospects in clinical diagnostics.

Molecularly Imprinted Plasmonic Substrates for Specific and Ultrasensitive Immunoassay of Trace Glycoproteins in Biological Samples

Assays of glycoproteins hold significant biological importance and clinical values, for which immunoassay has been the workhorse tool. As immunoassays are associated with disadvantages such as poor availability of high-specificity antibodies, limited stability of biological reagents, and tedious procedure, innovative alternatives that can overcome these drawbacks are highly desirable. Plasmonic immunosandwich assay (PISA) has emerged as an appealing alternative to immunoassay for fast and sensitive determination of trace glycoproteins in biosamples. Plasmonic substrates play key roles in PISA, not only in determining the specificity but also in greatly influencing the detection sensitivity. Herein, we report a new type of molecularly imprinted plasmonic substrates for rapid and ultrasensitive PISA assay of trace glycoproteins in complex real samples. The substrates were fabricated from glass slides, first coated with self-assembled monolayer (SAM) of gold nanoparticles (AuNPs) and then molecularly imprinted with organo-siloxane polymer in the presence of template glycoproteins. The prepared molecularly imprinted substrates exhibited not only a significant plasmonic effect but also excellent binding properties, ensuring the sensitivity as well as the specificity of the assay. Alkaline phosphatase (ALP) and α-fetoprotein (AFP), glycoproteins that are routinely used as disease markers in clinical diagnosis, were used as representative targets. The limit of detection (LOD) was 3.1 × 10^-12 M for ALP and 1.5 × 10^-14 M for AFP, which is the best among the PISA approaches reported. The sample volume required was only 5 μL, and the total time required was within 30 min for each assay. Specific and ultrasensitive determination of ALP and AFP in human serum was demonstrated. Because many disease biomarkers are glycoproteins, the developed PISA approach holds great promise in disease diagnostics.

Regioselective Molecularly Imprinted Reaction Field for [4 + 4] Photocyclodimerization of 2-Anthracenecarboxylic Acid

Molecularly imprinted cavities have functioned as a regioselective reaction field for the [4 + 4] photocyclodimerization of 2-anthracenecarboxylic acid (2-AC). Molecularly imprinted polymers were prepared by precipitation polymerization of N-methacryloyl-4-aminobenzamidine as a functional monomer to form a complex with template 2-AC and ethylene glycol dimethacrylate as a crosslinking monomer. The 2-AC-imprinted cavities thus constructed preferentially bound 2-AC with an affinity greater than that toward structurally related 9-anthracenecarboxylic acid, 2-aminoanthracene, and unsubstituted anthracene. Moreover, from the four possible regioisomeric cyclodimers, they mediated the [4 + 4] photocyclodimerization of 2-AC specifically to the anti-head-to-tail (anti-HT) isomer. This indicates that the imprinted cavities accommodate two 2-AC molecules in an anti-HT manner, thereby facilitating the subsequent regioselective photocyclodimerization.

Double Recognition and Selective Extraction of Glycoprotein Based on the Molecular Imprinted Graphene Oxide and Boronate Affinity

Specific recognition and separation of glycoproteins from complex biological solutions is very important in clinical diagnostics considering the close relationship between glycoproteins with the occurrence of diverse diseases, but the lack of materials with high selectivity and superior capture capacity still makes it a challenge. In this work, graphene oxide (GO) based molecularly imprinted polymers (MIPs) possessing double recognition abilities have been synthesized and applied as highly efficient adsorbents for glycoprotein recognition and separation. Boronic acid functionalized graphene oxide (GO-APBA) was first prepared and a template glycoprotein (ovalbumin, OVA) was then immobilized onto the surface of GO-APBA through boronate affinity. An imprinting layer was subsequently deposited onto GO-APBA surface by a sol-gel polymerization of organic silanes in aqueous solution. After the removal of the template glycoprotein, 3D cavities with double recognition abilities toward OVA were obtained in the as-prepared imprinted materials (GO-APBA/MIPs) because of the combination of boronate affinity and molecularly imprinted spatial matched cavities. The obtained GO-APBA/MIPs exhibited superior specific recognition toward OVA with imprinted factor (α) as high as 9.5, significantly higher than the corresponding value (4.0) of GO/MIPs without the introduction of boronic acid groups. Meanwhile, because of the synergetic effect of large surface area of graphene and surface imprinting, high binding capacity and fast adsorption/elution rate of GO-APBA/MIPs toward OVA were demonstrated and the saturation binding capacity of GO-APBA/MIPs could reach 278 mg/g within 40 min. The outstanding recognizing behavior (high adsorption capacity, highly specific recognition, and rapid binding rate) coupled to the facile and environmentally friendly preparation procedure makes GO-APBA/MIPs promising in the recognition, separation, and analysis of glycoproteins in clinics in the future.

Direct and Highly Selective Drug Optosensing in Real, Undiluted Biological Samples with Quantum-Dot-Labeled Hydrophilic Molecularly Imprinted Polymer Microparticles

Quantum-dot (QD)-labeled hydrophilic molecularly imprinted polymer (MIP) microparticles were prepared for direct and highly selective optosensing of an antibiotic drug (i.e., tetracycline (Tc)) in pure bovine/goat milks and bovine/porcine serums. "Living" CdTe QD-SiO2 composite microparticles with alkyl bromide groups on their surfaces were first obtained via the one-pot sol-gel reaction, and they were subsequently grafted with a Tc-imprinted polymer layer and poly(glyceryl monomethacrylate) brushes via the successive surface-initiated atom transfer radical polymerizations. The resulting MIP microparticles with QD labeling and hydrophilic polymer brushes could function properly in biological samples and showed obvious template-binding-induced fluorescence quenching, which make them a useful fluorescent chemosensor with limits of detection down to 0.14 μM in complex biological media. Moreover, a facile and effective approach was developed based on a newly derived equation to eliminate the false positives of the fluorescent chemosensor and provide it with wider linear detection concentration ranges in comparison with those obtained using the generally adopted Stern-Volmer equation. Furthermore, the fluorescent MIP chemosensor was also successfully applied for directly, sensitively, selectively, and accurately quantifying Tc in biological media, and the average recoveries were in the range of 95%∼105% even when several other drugs and the fluorescently interfering chlortetracycline were present in the samples.

Preparation of High-Efficiency Cytochrome c-Imprinted Polymer on the Surface of Magnetic Carbon Nanotubes by Epitope Approach via Metal Chelation and Six-Membered Ring

A novel epitope molecularly imprinted polymer on the surface of magnetic carbon nanotubes (MCNTs@EMIP) was successfully fabricated to specifically recognize target protein cytochrome c (Cyt C) with high performance. The peptides sequences corresponding to the surface-exposed C-terminus domains of Cyt C was selected as epitope template molecule, and commercially available zinc acrylate and ethylene glycol dimethacrylate (EGDMA) were employed as functional monomer and cross-linker, respectively, to synthesize MIP via free radical polymerization. The epitope was immobilized via metal chelation and six-membered ring formed between the functional monomer and the hydroxyl and amino groups of the epitope. The resulting MCNTs@EMIP exhibited specific recognition ability toward target Cyt C including more satisfactory imprinting factor (about 11.7) than that of other reported imprinting methods. In addition, the MCNTs@EMIP demonstrated a high adsorption amount (about 780.0 mg g(-1)) and excellent selectivity. Besides, the magnetic property of the support material made the processes easy and highly efficient by assistance of an external magnetic field. High-performance liquid chromatography analysis of Cyt C in bovine blood real sample and protein mixture indicated that the specificity was not affected by other competitive proteins, which forcefully stated that the MCNTs@EMIP had potential to be applied in bioseparation area. In brief, this study provided a new protocol to detect target protein in complex sample via epitope imprinting approach and surface imprinting strategy.

Thermoresponsive Epitope Surface-Imprinted Nanoparticles for Specific Capture and Release of Target Protein from Human Plasma

Among various artificial antibodies, epitope imprinted polymer has been paid increasingly attention. To modulate the "adsorption and release" behavior by environment stimuli, N-isopropylacrylamide, was adopted to fabricate the thermoresponsive epitope imprinted sites. The prepared imprinted materials could adsorb 46.6 mg/g of target protein with the imprinting factor of 4.0. The template utilization efficiency could reach as high as 8.21%. More importantly, in the real sample, the materials could controllably capture the target protein from the human plasma at 45 °C and release it at 4 °C, which demonstrated the "on-demand" application potentials of such materials in the biomolecule recognition field.

Highly stable and reusable imprinted artificial antibody used for in situ detection and disinfection of pathogens

Sandwich ELISA methods have been widely used for biomarker and pathogen detection because of their high specificity and sensitivity. However, the main drawbacks of this assay are the cost, the time-consuming procedure for the isolation of antibodies and their poor stability. To overcome these restrictions, we herein fabricated artificial antibodies based on imprinting technology and developed a sandwich ELISA for pathogen detection. Both the capture and detection antibodies were obtained via an in situ method, with simplicity, rapidity and low cost. The peroxidase mimics, the CeO2 nanoparticles, as signal generators were integrated with the detection antibody. The fabricated artificial antibodies exhibited not only natural antibody-like binding affinities and selectivities, but also superior stability and reusability. The detection limit was about 500 CFU mL-1, which is much lower than that of traditional ELISA methods (104 to 105 CFU mL-1). Furthermore, the capture antibody can disinfect pathogens in situ.