Enhanced electro-catalysis for methanol oxidation reaction performance by edge defects of ordered mesoporous carbon

Heteroatom-doped carbon materials are widely used to improve the electrocatalytic oxidation of methanol; however, the underlying mechanisms driving this enhancement remain poorly understood. A major challenge lies in developing non-doped carbon supports with tunable intrinsic defect types tailored for metal-based catalysts. In this study, we synthesize a series of ordered mesoporous carbon (OMC) supports with adjustable edge defect densities by varying roasting temperatures and employing a zinc (Zn) evaporation strategy to systematically investigate the impact of edge defects on methanol oxidation reaction (MOR) performance. Theoretical calculations and structural characterizations confirm that the electron metal-support interaction (EMSI) between OMC edge defects and palladium nanoparticles (Pd NPs) effectively modulates the electronic structure of Pd NPs. This modulation not only enhances overall reaction activity and selectivity for the non-CO pathway but also strengthens the anchoring of Pd NPs, leading to superior activity and stability of the Pd/OMC-Zn0.55 catalyst in methanol electrocatalytic oxidation. Notably, after rigorously excluding the influence of various physicochemical properties of the carbon supports, the crucial role of edge defects in improving MOR performance is established. This work provides essential insights into the controlled synthesis of carbon-based catalysts with edge defects and introduces promising strategies for the development of high-performance anode catalysts for direct methanol fuel cells.

Two-Dimensional Catalysts: From Model to Reality

Two-dimensional (2D) materials have been utilized broadly in kinds of catalytic reactions due to their fully exposed active sites and special electronic structure. Compared with real catalysts, which are usually bulk or particle, 2D materials have more well-defined structures. With easily identified structure-modulated engineering, 2D materials become ideal models to figure out the catalytic structure-function relations, which is helpful for the precise design of catalysts. In this review, the unique function of 2D materials was summarized from model study to reality catalysis and application. It includes several typical 2D materials, such as graphene, transition metal dichalcogenides, metal, and metal (hydr)oxide materials. We introduced the structural characteristics of 2D materials and their advantages in model researches. It emphatically summarized how 2D materials serve as models to explore the structure-activity relationship by combining theoretical calculations and surface research. The opportunities of 2D materials and the challenges for fundamentals and applications they facing are also addressed. This review provides a reference for the design of catalyst structure and composition, and could inspire the realization of two-dimensional materials from model study to reality application in industry.

Structural Modulation of Nanographenes Enabled by Defects, Size and Doping for Oxygen Reduction Reaction

Nanographenes are among the fastest-growing materials used for the oxygen reduction reaction (ORR) thanks to their low cost, environmental friendliness, excellent electrical conductivity, and scalable synthesis. The perspective of replacing precious metal-based electrocatalysts with functionalized graphene is highly desirable for reducing costs in energy conversion and storage systems. Generally, the enhanced ORR activity of the nanographenes is typically deemed to originate from the heteroatom doping effect, size effect, defects effect, and/or their synergistic effect. All these factors can efficiently modify the charge distribution on the sp2-conjugated carbon framework, bringing about optimized intermediate adsorption and accelerated electron transfer steps during ORR. In this review, the fundamental chemical and physical properties of nanographenes are first discussed about ORR applications. Afterward, the role of doping, size, defects, and their combined influence in boosting nanographenes' ORR performance is introduced. Finally, significant challenges and essential perspectives of nanographenes as advanced ORR electrocatalysts are highlighted.

Unlocking Mesoscopic Disorder in Graphitic Carbon with Spectroelectrochemistry

Intrinsic structural and oxidic defects activate graphitic carbon electrodes towards electrochemical reactions underpinning energy conversion and storage technologies. Yet, these defects can also disrupt the long-range and periodic arrangement of carbon atoms, thus, the characterization of graphitic carbon electrodes necessitates in-situ atomistic differentiation of graphitic regions from mesoscopic bulk disorder. Here, we leverage the combined techniques of in-situ attenuated total reflectance infrared spectroscopy and first-principles calculations to reveal that graphitic carbon electrodes exhibit electric-field dependent infrared activity that is sensitive to the bulk mesoscopic intrinsic disorder. With this platform, we identify graphitic regions from amorphous domains by discovering that they demonstrate opposing electric-field-dependent infrared activity under electrochemical conditions. Our work provides a roadmap for identifying mesoscopic disorder in bulk carbon materials under potential bias.

Flow-Chemistry Based Green Synthesis of Graphene Oxide at Minutes Timescale

Graphene oxide (GO) is broadly investigated in the electrochemical field. However, for industrial applications, it still suffer from high pollution, low efficiency, poor production quality, and safety concerns associated with traditional synthesis methods. Herein, guided by theoretical analyses, a new oxygen-atom-transfer (OAT) mechanism for periodate oxidizing graphite is revealed, exhibiting controllable reaction activity, strong orbital interaction, and abundant electron transfer. Moreover, a flow chemistry strategy with high mass/heat transfer rates is designed to enhance interlayer diffusion and reaction dynamics between oxidants and graphite, ensuring the efficient synthesis of GO within several minutes. As a result, both low oxygen-content GO with large size, and high oxygen-content GO with adequate active sites can be precisely and safely synthesized. Benefitting from the controllability of oxygen content and lateral size, the as-prepared GO sheets can be facilely assembled into fiber/film electrodes that present high mechanical flexibility, large electrical conductivity, and outstanding electrochemical performance.

Design and regulation of defective electrocatalysts

Electrocatalysts are the key components of electrochemical energy storage and conversion devices. High performance electrocatalysts can effectively reduce the energy barrier of the chemical reactions, thereby improving the conversion efficiency of energy devices. The electrocatalytic reaction mainly experiences adsorption and desorption of molecules (reactants, intermediates and products) on a catalyst surface, accompanied by charge transfer processes. Therefore, surface control of electrocatalysts plays a pivotal role in catalyst design and optimization. In recent years, many studies have revealed that the rational design and regulation of a defect structure can result in rearrangement of the atomic structure on the catalyst surface, thereby efficaciously promoting the electrocatalytic performance. However, the relationship between defects and catalytic properties still remains to be understood. In this review, the types of defects, synthesis methods and characterization techniques are comprehensively summarized, and then the intrinsic relationship between defects and electrocatalytic performance is discussed. Moreover, the application and development of defects are reviewed in detail. Finally, the challenges existing in defective electrocatalysts are summarized and prospected, and the future research direction is also suggested. We hope that this review will provide some principal guidance and reference for researchers engaged in defect and catalysis research, better help researchers understand the research status and development trends in the field of defects and catalysis, and expand the application of high-performance defective electrocatalysts to the field of electrocatalytic engineering.

Advanced Nanocarbons Toward two-Electron Oxygen Electrode Reactions for H2O2 Production and Integrated Energy Conversion

Hydrogen peroxide (H2O2) plays a pivotal role in advancing sustainable technologies due to its eco-friendly oxidizing capability. The electrochemical two-electron (2e-) oxygen reduction reaction and water oxidation reaction present an environmentally green method for H2O2 production. Over the past three years, significant progress is made in the field of carbon-based metal-free electrochemical catalysts (C-MFECs) for low-cost and efficient production of H2O2 (H2O2EP). This article offers a focused and comprehensive review of designing C-MFECs for H2O2EP, exploring the construction of dual-doping configurations, heteroatom-defect coupling sites, and strategic dopant positioning to enhance H2O2EP efficiency; innovative structural tuning that improves interfacial reactant concentration and promote the timely release of H2O2; modulation of electrolyte and electrode interfaces to support the 2e- pathways; and the application of C-MFECs in reactors and integrated energy systems. Finally, the current challenges and future directions in this burgeoning field are discussed.

Recent Advances on Carbon-Based Metal-Free Electrocatalysts for Energy and Chemical Conversions

Over the last decade, carbon-based metal-free electrocatalysts (C-MFECs) have become important in electrocatalysis. This field is started thanks to the initial discovery that nitrogen atom doped carbon can function as a metal-free electrode in alkaline fuel cells. A wide variety of metal-free carbon nanomaterials, including 0D carbon dots, 1D carbon nanotubes, 2D graphene, and 3D porous carbons, has demonstrated high electrocatalytic performance across a variety of applications. These include clean energy generation and storage, green chemistry, and environmental remediation. The wide applicability of C-MFECs is facilitated by effective synthetic approaches, e.g., heteroatom doping, and physical/chemical modification. These methods enable the creation of catalysts with electrocatalytic properties useful for sustainable energy transformation and storage (e.g., fuel cells, Zn-air batteries, Li-O2 batteries, dye-sensitized solar cells), green chemical production (e.g., H2O2, NH3, and urea), and environmental remediation (e.g., wastewater treatment, and CO2 conversion). Furthermore, significant advances in the theoretical study of C-MFECs via advanced computational modeling and machine learning techniques have been achieved, revealing the charge transfer mechanism for rational design and development of highly efficient catalysts. This review offers a timely overview of recent progress in the development of C-MFECs, addressing material syntheses, theoretical advances, potential applications, challenges and future directions.

Approaching Splendid Catalysts for Li-CO2 Battery from the Theory to Practical Designing: A Review

Lithium carbon dioxide (Li-CO2) batteries, noted for their high discharge voltage of approximately 2.8 V and substantial theoretical specific energy of 1876 Wh kg-1, represent a promising avenue for new energy sources and CO2 emission reduction. However, the practical application of these batteries faces significant hurdles, particularly at high current densities and over extended cycle lives, due to their complex reaction mechanisms and slow kinetics. This paper delves into the recent advancements in cathode catalysts for Li-CO2 batteries, with a specific focus on the designing philosophy from composition, geometry, and homogeneity of the catalysts to the proper test conditions and real-world application. It surveys the possible catalytic mechanisms, giving readers a brief introduction of how the energy is stored and released as well as the critical exploration of the relationship between material properties and performances. Specifically, optimization and standardization of test conditions for Li-CO2 battery research is highlighted to enhance data comparability, which is also critical to facilitate the practical application of Li-CO2 batteries. This review aims to bring up inspiration from previous work to advance the design of more effective and sustainable cathode catalysts, tailored to meet the practical demands of Li-CO2 batteries.

Deepening the Understanding of Carbon Active Sites for ORR Using Electrochemical and Spectrochemical Techniques

Defect-containing carbon nanotube materials were prepared by subjecting two commercial multiwalled carbon nanotubes (MWCNTs) of different purities to purification (HCl) and oxidative conditions (HNO3) and further heat treatment to remove surface oxygen groups. The as-prepared carbon materials were physicochemically characterized to observe changes in their properties after the different treatments. TEM microscopy shows morphological modifications in the MWCNTs after the treatments such as broken walls and carbon defects including topological defects. This leads to both higher surface areas and active sites. The carbon defects were analysed by Raman spectroscopy, but the active surface area (ASA) and the electrochemical active surface area (EASA) values showed that not all the defects are equally active for oxygen reduction reactions (ORRs). This suggests the importance of calculating either ASA or EASA in carbon materials with different structures to determine the activity of these defects. The as-prepared defect-containing multiwalled carbon nanotubes exhibit good catalytic performance due to the formation of carbon defects active for ORR such as edge sites and topological defects. Moreover, they exhibit good stability and methanol tolerances. The as-prepared MWCNTs sample with the highest purity is a promising defective carbon material for ORR because its activity is only related to high concentrations of active carbon defects including edge sites and topological defects.

ZnO-templated hollow amorphous carbon: oxygen adsorption and doping synergy for enhanced ORR catalysis

In pursuit of highly active zinc-air battery (ZAB) catalysts, nitrogen doping has proven key to enhancing carbon-based non-metallic catalysts' performance in the oxygen reduction reaction (ORR). This study employed a novel method to synthesize variously sized ZnO materials coated with ZIF-8. Notably, smaller particle sizes correlated with reduced activation energy. ZnO-12, the smallest variant, fully carbonized at 800 °C, resulting in zinc ion evaporation and the formation of an amorphous carbon nano-hollow structure, ZIF8/ZnO-12. This material showcased remarkable ORR properties, with an onset potential of 0.9 V (vs. RHE) and a Tafel slope of 71.4 mV dec-1, surpassing the benchmark Pt/C catalyst and exhibiting excellent stability. Moreover, in ZAB tests, ZIF8/ZnO-12 achieved a specific capacity of 816 mA h g-1, outperforming Pt/C. DFT calculations indicate that under alkaline conditions, nitrogen-doped carbon materials containing adsorbed oxygen and doped oxygen exhibit lower catalytic activation energy for the ORR, which is beneficial for accelerating the ORR. This research provides valuable insights into designing more efficient carbon-based non-metallic catalysts for ZABs.

Role of Vacancy Defects and Nitrogen Dopants for the Reduction of Oxygen on Graphene

Disentangling the roles of nitrogen dopants and vacancy defects (VG) in metal-free carbon catalysts for the oxygen reduction reaction (ORR) ideally requires studying both the dopants and defects separately. Here, we systematically introduced nitrogen dopants and VGs via plasma treatment into the basal plane of monolayer graphene as a model carbon catalyst to investigate their specific roles in ORR catalysis. An increased defect density including dopants is positively associated with boosted ORR activity. Nitrogen dopants are responsible for an improved current via a 2e- pathway generating hydroperoxide, while VGs result in enhanced kinetics and water production. We therefore infer that VGs in graphene are responsible for the improved ORR kinetics, while nitrogen dopants majorly influence the selectivity of ORR reaction products. The nitrogen dopants without VGs lead to a higher overpotential compared with the pristine graphene. Instead of the attribution of the ORR active site to only nitrogen species in carbon materials, the improved ORR activity in nitrogen-doped carbon materials should be attributed to the active sites constituted of VGs, oxygen dopants, and nitrogen dopants. Through this work, we provide important insights into the intertwined roles of nitrogen and VGs as well as oxygen dopants in nitrogen-doped metal-free catalysts for a more efficient ORR.

Exploring the Microstructural Effect of FeCo Alloy on Carbon Microsphere Deposition and Enhanced Electromagnetic Wave Absorption

The rational design of magnetic carbon composites, encompassing both their composition and microstructure, holds significant potential for achieving exceptional electromagnetic wave-absorbing materials (EAMs). In this study, FeCo@CM composites were efficiently fabricated through an advanced microwave plasma-assisted reduction chemical vapor deposition (MPARCVD) technique, offering high efficiency, low cost, and energy-saving benefits. By depositing graphitized carbon microspheres, the dielectric properties were significantly enhanced, resulting in improved electromagnetic wave absorption performances through optimized impedance matching and a synergistic effect with magnetic loss. A systematic investigation revealed that the laminar-stacked structure of FeCo exhibited superior properties compared to its spherical counterpart, supplying a higher number of exposed edges and enhanced catalytic activity, which facilitated the deposition of uniform and low-defect graphitized carbon microspheres. Consequently, the dielectric loss performance of the FeCo@CM composites was dramatically improved due to increased electrical conductivity and the formation of abundant heterogeneous interfaces. At a 40 wt% filling amount and a frequency of 7.84 GHz, the FeCo@CM composites achieved a minimum reflection loss value of -58.2 dB with an effective absorption bandwidth (fE) of 5.13 GHz. This study presents an effective strategy for developing high-performance EAMs.

Electrochemistry at the Edge of a van der Waals Heterostructure

Artificial van der Waals heterostructures, obtained by stacking two-dimensional (2D) materials, represent a novel platform for investigating physicochemical phenomena and applications. Here, the electrochemistry at the one-dimensional (1D) edge of a graphene sheet, sandwiched between two hexagonal boron nitride (hBN) flakes, is reported. When such an hBN/graphene/hBN heterostructure is immersed in a solution, the basal plane of graphene is encapsulated by hBN, and the graphene edge is exclusively available in the solution. This forms an electrochemical nanoelectrode, enabling the investigation of electron transfer using several redox probes, e.g., ferrocene(di)methanol, hexaammineruthenium, methylene blue, dopamine and ferrocyanide. The low capacitance of the van der Waals edge electrode facilitates cyclic voltammetry at very high scan rates (up to 1000 V s-1), allowing voltammetric detection of redox species down to micromolar concentrations with sub-second time resolution. The nanoband nature of the edge electrode allows operation in water without added electrolyte. Finally, two adjacent edge electrodes are realized in a redox-cycling format. All the above-mentioned phenomena can be investigated at the edge, demonstrating that nanoscale electrochemistry is a new application avenue for van der Waals heterostructures. Such an edge electrode will be useful for studying electron transfer mechanisms and the detection of analyte species in ultralow sample volumes.

Enhanced oxygen reduction activity ofα-MnO2by NH3plasma treatment

Oxygen vacancies and heteroatom doping play important role in oxygen reduction activity of metal oxides. Developing efficient modification method is one of the key issues in catalysts research. Room temperature plasma treatment, with the advantages of mild working conditions, no emissions and high efficiency, is a new catalyst modification method developed in recent years. In this work, hydrothermal synthesizedα-MnO2nanorods are treated in NH3plasma at room temperature. In the reducing atmosphere, oxygen vacancies and N doping are achieved simultaneously on the surface. The NH3plasma etched MnO2demonstrate a significant enhanced oxygen reduction activity with half-wave potential of 0.84 V, limiting current density of 6.32 mA cm-2and transferred electrons number of 3.9. The Mg-air battery with N-MnO2display a maximum power density of 76.3 mW cm-2as well as stable discharge performance. This work provides new ideas for preparing efficient and cost-effective method to boost the catalysts activity.

Insights into persulfate activation by dicyandiamide-derived carbon for 2,4-dichlorophenol degradation: Roles of nitrogen doping and defective carbon atoms

In this study, a dicyandiamide residue-derived carbon material (DWC-800) was fabricated through a two-step process involving ball-milling nitrogen (N) doping and high-temperature annealing, and then utilized for peroxodisulfate (PDS) activation in the removal of 2,4-dichlorophenol (2,4-DCP). The obtained DWC-800, with very low N content (0.52 at.%), exhibited highly efficient PDS activation, resulting in complete removal of 2,4-DCP in 60 min. This performance was superior to that of the material with high N content (15.4 at.%), which was prepared using only one-step ball-milling N doping. The N-doped process increased the defective degree of carbocatalyst, and these reactive carbon defects rather than N species greatly improved the adsorption and catalytic activity. The results of quenching experiments and electron paramagnetic resonance demonstrated that PDS activation by DWC-800 for 2,4-DCP degradation followed a nonradical pathway, leading to the production of both singlet oxygen (1O2) and carbon-PDS* complex. Notably, electron transfer mediated by the carbon-PDS* complex played a significant role in the degradation of 2,4-DCP. Overall, this study gets new insights into the role of N doping in mediating the structural properties of the carbocatalyst and its catalytic performance, and provides a theoretical basis for the utilization of dicyandiamide waste residue for wastewater remediation.

Synergistic effects of hierarchical porous structures and ultra-high pyridine nitrogen doping enhance the oxygen reduction reaction electrocatalytic performance of metal-free laminated lignin-based carbon

Construction of non-metallic biomass-carbon based catalysts for fuel cell air cathode applications has attracted great attention in recent years. In this work, a convenient and clean technique was developed to fabrication nitrogen-doped lignin-based hierarchical porous lamellar carbon (N-LHPC) via lignin as the carbon precursor, melamine/urea as the nitrogen source and ZnC2O4.2H2O as the chemical activator. The N-LHPC has a high specific surface area (491.5 m2 g-1) and macroporous/mesoporous/microporous structures. The nitrogen doping of N-LHPC can reach 16.37 wt%, with a high pyridinic nitrogen content of 41.39 at.%. N-LHPC exhibits a high half-wave potential (0.87 V) and a large limiting current density (5.75 mA cm-2) in 0.1 mol KOH media which is comparable to the commercial Pt/C catalysts. Furthermore, N-LHPC was assembled as air cathode catalyst for Zn-air batteries to evaluate its practical catalytic performance, and the power density was as high as 191 mW cm-2, which was superior to the 20 wt% Pt/C electrocatalyst. This research demonstrates that lignin is a promising carbon source for the fabrication of high catalytic activity and economical electrocatalysts for energy storage systems.

Recent Progress in Hot Spot Regulated Strategies for Catalysts Applied in Li-CO2 Batteries

As a high energy density power system, lithium-carbon dioxide (Li-CO2 ) batteries play an important role in addressing the fossil fuel crisis issues and alleviating the greenhouse effect. However, the sluggish transformation kinetic of CO2 and the difficult decomposition of discharge products impede the achievement of large capacity, small overpotential, and long life span of the batteries, which require exploring efficient catalysts to resolve these problems. In this review, the main focus is on the hot spot regulation strategies of the catalysts, which include the modulation of the active sites, the designing of microstructure, and the construction of composition. The recent progress of promising catalysis with hot spot regulated strategies is systematically addressed. Critical challenges are also presented and perspectives to provide useful guidance for the rational design of highly efficient catalysts for practical advanced Li-CO2 batteries are proposed.

Tailoring the Atomic-Local Environment of Carbon Nanotube Tips for Selective H2 O2 Electrosynthesis at High Current Densities

The atomic-local environment of catalytically active sites plays an important role in tuning the activity of carbon-based metal-free electrocatalysts (C-MFECs). However, the rational regulation of the environment is always impeded by synthetic limitations and insufficient understanding of the formation mechanism of the catalytic sites. Herein, the possible cleavage mechanism of carbon nanotubes (CNTs) through the crossing points during ball-milling is proposed, resulting in abundant CNT tips that are more susceptible to be modified by heteroatoms, achieving precise modulation of the atomic environment at the tips. The obtained CNTs with N,S-rich tips (N,S-TCNTs) exhibit a wide potential window of 0.59 V along with H2 O2 selectivity for over 90.0%. Even using air as the O2 source, the flow cell system with N,S-TCNTs catalyst attains high H2 O2 productivity up to 30.37 mol gcat. -1  h-1 @350 mA cm-2 , superior to most reported C-MFECs. From a practical point of view, a solid electrolyzer based on N,S-TCNTs is further employed to realize the in-situ continuous generation of pure H2 O2 solution with high productivity (up to 4.35 mmol cm-2  h-1 @300 mA cm-2 ; over 300 h). The CNTs with functionalized tips hold great promise for practical applications, even beyond H2 O2 generation.

A General and Ultrafast Polishing Method with Truly Atomic Roughness

The advancement of science and technology is always accompanied by better manufacturing precision. Ideally, the highest precision for manufacturing a surface is truly atomic flatness, which implies that all topmost surface atoms are in a single layer of the crystal face. However, almost no methods can achieve this surface with high efficiency at present. Herein, we present a method to fabricate a large-scale truly atomically flat surface with ultrafast speed. Through the selective etching of surface atoms, our method can achieve an atomically flat surface with 0.05 nm Sa roughness. It is notable that the polishing efficiency of our method is more than 1000 times higher than that of conventional methods. We have demonstrated its generality on various single-crystal materials and obtained atomic roughness and an ultrahigh polishing rate. This method has the potential to promote the mass-production of atomic-scale smooth surfaces, the application of third-generation semiconductor materials, and the innovation of advanced technologies.

Local Nanostrain Engineering of Monolayer MoS2 Using Atomic Force Microscopy-Based Thermomechanical Nanoindentation

Strain engineering in two-dimensional materials (2DMs) has important application potential for electronic and optoelectronic devices. However, achieving precise spatial control, adjustable sizing, and permanent strain with nanoscale resolution remains challenging. Herein, a thermomechanical nanoindentation method is introduced, inspired by skin edema caused by mosquito bites, which can induce localized nanostrain and bandgap modulation in monolayer molybdenum disulfide (MoS2) transferred onto a poly(methyl methacrylate) film utilizing a heated atomic force microscopy nanotip. Via adjustment of the machining parameters, the strains of MoS2 are manipulated, achieving an average strain of ≤2.6% on the ring-shaped expansion structure. The local bandgap of MoS2 is spatially modulated using three types of nanostructures. Among them, the nanopit has the largest range of bandgap regulation, with a substantial change of 56 meV. These findings demonstrate the capability of the proposed method to create controllable and reproducible nanostrains in 2DMs.

Quantifying Carbon Active Sites Chemisorbing Hydrogen on Oxygen Containing Activated Carbons during Heat Treatment in Hydrogen Atmosphere

Carbon edge sites have been widely studied because of their importance in surface reactivity and electronic properties. The surface chemistry of the carbon edge sites is relevant to various reactions, and carbon active sites are key topics in many applications. Temperature-programmed desorption (TPD) and temperature-programmed reaction (TPR) techniques are used to clarify the fate of oxygen atoms present as CO-yielding functional groups on the activated carbon during heat treatment in hydrogen with an argon balance atmosphere. It has been elucidated that CO is decomposed, H2O is released by a reduction reaction with atmospheric H2, and CO2 is evolved by secondary reactions from the CO-yielding functional groups during TPR. Atmospheric H2 consumption during TPR is observed and its rate is characterized. The amounts of carbon active sites are quantified by determining the amount of H2 chemisorbed onto the carbon surfaces. Finally, it is quantitatively determined that the active sites that chemisorb hydrogen are generated after the decomposition of CO and CO2 caused by secondary reactions between ca. 700 and 1100 K from the CO-yielding functional groups. The origin of these CO-yielding functional groups is generally attributed to phenol/ether groups. In addition to these oxygen-containing functional group decompositions, some free sites on the edge sites are activated for H2 chemisorption by heat treatment between ca. 700 and 1100 K.

Phase Engineering and Synchrotron-Based Study on Two-Dimensional Energy Nanomaterials

In recent years, there has been significant interest in the development of two-dimensional (2D) nanomaterials with unique physicochemical properties for various energy applications. These properties are often derived from the phase structures established through a range of physical and chemical design strategies. A concrete analysis of the phase structures and real reaction mechanisms of 2D energy nanomaterials requires advanced characterization methods that offer valuable information as much as possible. Here, we present a comprehensive review on the phase engineering of typical 2D nanomaterials with the focus of synchrotron radiation characterizations. In particular, the intrinsic defects, atomic doping, intercalation, and heterogeneous interfaces on 2D nanomaterials are introduced, together with their applications in energy-related fields. Among them, synchrotron-based multiple spectroscopic techniques are emphasized to reveal their intrinsic phases and structures. More importantly, various in situ methods are employed to provide deep insights into their structural evolutions under working conditions or reaction processes of 2D energy nanomaterials. Finally, conclusions and research perspectives on the future outlook for the further development of 2D energy nanomaterials and synchrotron radiation light sources and integrated techniques are discussed.

Edge and Basal Plane Anisotropy of a Preanodized Pencil Graphite Electrode Surface Revealed Using Scanning Electrochemical Microscopy and Electrocatalytic Dopamine Oxidation as a Molecular Probe

Pencil graphite (PGE), an ultralow-cost and ready-to-use disposable-type electrode, has been used for various electrochemical and electroanalytical applications after its surface anodization (PGE*, * means preanodized surface). Indeed, systematic studies on mechanistic and surface features of PGE* have not yet been explored. Herein, we report anodized pencil graphite as a model system to study molecular level insights into the surface using a scanning electrochemical microscopy (SECM) technique and dopamine (DA) electrocatalytic oxidation reaction as a molecular probe. The as-prepared PGE* showed an appreciable electronic conductivity similar to the edge-plane graphitic sites (EPPG) of the highly pyrolytic graphitic electrode (HOPG) but without any surface deterioration that occurs with HOPG due to the instability of the EPPG. Physicochemical characterizations by FESEM, FTIR, Raman, and XPS techniques revealed a flake-like exfoliated PGE* surface with higher contents of carbon-oxygen especially phenolic/alcoholic functional groups than the PGE surface. Based on the chronocoulometric experiment, the number of functional groups formed on the PGE* was calculated as 10.9 × 10-10 mol cm-2. An independent SECM technique using ferricyanide as a redox probe showed the existence of a heterogeneous surface and exhibited an improved electron transfer activity due to the flake-like graphitic island on the PGE* surface. Investigated DA electrochemical oxidation on PGE* yielded about three times enhancement in the peak current signal and about 200 mV reduction in the oxidation potential over the PGE without any serious surface fouling feature that is related to the intermediate polydopamine formation on the basal-plane graphitic surface of the underlying electrode. As an independent electroanalytical study, a prototype electrochemical sensor using PGE* as a working electrode for instant detection of DA-containing pharmaceutical samples in a 1 mL Eppendorf vial has been demonstrated.

Defect-Engineered Mesoporous Undoped Carbon Nanoribbons for Benchmark Oxygen Reduction Reaction

For large-scale fuel cell applications, it is significant to replace expensive Pt-based oxygen reduction reaction (ORR) electrocatalysts with nonprecious metal- or metal-free carbon-based catalysts with high activity. However, it is still challenging to deeply understand the role of intrinsic defects and the origin of ORR activity in pure nanocarbon. Therefore, a novel self-assembly and a pyrolysis strategy to fabricate defect-rich mesoporous carbon nanoribbons are presented. Due to the effective regulation of nanoarchitecture, a vast number of defective catalytic sites (edge defects and holes) are exposed, which thereby enhances the electron transfer kinetics and catalytic activity. Such undoped nanoribbons display a large half-wave potential of 0.837 V, excellent long-term stability, and exceptional methanol tolerance, surpassing the most undoped ORR catalysts and the commercial Pt/C (20 wt.%) catalyst. Structural characterizations and density functional theory (DFT) calculations confirm that the zigzag edge defects and the armchair pentagon at the hole defect are responsible for outstanding ORR performance.

FeNiCrCoMn High-Entropy Alloy Nanoparticles Loaded on Carbon Nanotubes as Bifunctional Oxygen Catalysts for Rechargeable Zinc-Air Batteries

An efficient and stable bifunctional oxygen catalyst is necessary to complete the application of the rechargeable zinc-air battery. Herein, an economical and convenient process was adopted to successfully coat high-entropy alloy Fe₁₂Ni₂₃Cr₁₀Co_55-xMn_x nanoparticles on carbon nanotubes (CNTs). In 0.1 M KOH solution, with a bifunctional oxygen overpotential (ΔE) of only 0.7 V, the catalyst Fe₁₂Ni₂₃Cr₁₀Co₃₀Mn₂₅/CNT exhibits excellent bifunctional oxygen catalytic performance, exceeding most catalysts reported so far. In addition, the air electrode assembled with this catalyst exhibits high specific capacity (760 mA h g^-1) and energy density (865.5 W h kg^-1) in a liquid zinc-air battery, with a long-term cycle stability over 256 h. The density functional theory calculation points out that changing the atomic ratio of Co/Mn can change the adsorption energy of the oxygen intermediate (*OOH), which allows the ORR catalytic process to be accelerated in the alkaline environment, thereby increasing the ORR catalytic activity. This article has important implications for the progress of commercially available bifunctional oxygen catalysts and their applications in zinc-air batteries.

Vacancy designed 2D materials for electrodes in energy storage devices

Vacancies are ubiquitous in nature, usually playing an important role in determining how a material behaves, both physically and chemically. As a consequence, researchers have introduced oxygen, sulphur and other vacancies into bi-dimensional (2D) materials, with the aim of achieving high performance electrodes for electrochemical energy storage. In this article, we focused on the recent advances in vacancy engineering of 2D materials for energy storage applications (supercapacitors and secondary batteries). Vacancy defects can effectively modify the electronic characteristics of 2D materials, enhancing the charge-transfer processes/reactions. These atomic-scale defects can also serve as extra host sites for inserted protons or small cations, allowing easier ion diffusion during their operation as electrodes in supercapacitors and secondary batteries. From the viewpoint of materials science, this article summarises recent developments in the exploitation of vacancies (which are surface defects, for these materials), including various defect creation approaches and cutting-edge techniques for detection of vacancies. The crucial role of defects for improvement in the energy storage performance of 2D electrode materials in electrochemical devices has also been highlighted.

Transition metal chalcogenides carbon-based as bifunctional cathode electrocatalysts for rechargeable zinc-air battery: An updated review

The rechargeable alkaline aqueous zinc-air batteries (ZABs) are prospective candidates to supply the energy demand for their high theoretical energy density, inherent safety, and environmental friendliness. However, their practical application is mainly restricted by the unsatisfactory efficiency of the air electrode, leading to an intense search for high-efficient oxygen electrocatalysts. In recent years, the composites of carbon materials and transition metal chalcogenides (TMC/C) have emerged as promising alternatives because of the unique properties of these single compounds and the synergistic effect between them. In this sense, this review presented the electrochemical properties of these composites and their effects on the ZAB performance. The operational fundamentals of the ZABs were described. After elucidating the role of the carbon matrix in the hybrid material, the latest developments in the ZAB performance of the monometallic structure and spinel of TMC/C were detailed. In addition, we report topics on doping and heterostructure due to the large number of studies involving these specific defects. Finally, a critical conclusion and a brief overview sought to contribute to the advancement of TMC/C in the ZABs.

The Dynamic Nature of Graphene Active Sites in the H2O Gasification process: A ReaxFF and DFT Study

CONTEXT

A steam-rich environment is a more promising application scenario for future coal-fired processes, while active sites are the key factor that determines the reactivity of carbonaceous fuels. The steam gasification process of carbon surfaces with different numbers of active sites (0, 12, 24, 36) was simulated using reactive molecular dynamics in the present study. The temperature for the decomposition of H₂O and the gasification of carbon is determined using temperature-increasing simulation. The decomposition of H₂O was influenced by two driving forces, thermodynamics and active sites on the carbon surface, which dominated the different reaction stages, leading to the observed segmentation phenomenon of the H₂ production rate. The existence and number of initial active sites have a positive correlation with both two stages of the reaction, greatly reducing the activation energy. Residual OH groups play an important role in the gasification of carbon surfaces. The supply of OH groups through the cleavage of OH bonds in H₂O is the rate-limiting step in the carbon gasification reaction. The adsorption preference at carbon defect sites was calculated using density functional theory. Two stable configurations (ether & semiquinone groups) can be formed with O atoms adsorbed on the carbon surface according to the number of active sites. This study will provide further insights into the tuning of active sites for advanced carbonaceous fuels or materials.

METHODS

The large-scale atomic/molecule massively parallel simulator (LAMMPS) code combined with the reaction force-field method was used to carry out the ReaxFF molecular dynamics simulation, where the ReaxFF potentials were taken from Castro-Marcano, Weismiller and William. The initial configuration was built using Packmol, and the visualization of the calculation results was realized through Visual Molecular Dynamics (VMD). The timestep was set to 0.1 fs to detect the oxidation process with high precision. PWscf code in QUANTUM ESPRESSO (QE) package, was used to evaluate the relative stability of different possible intermediate configurations and the thermodynamic stability of gasification reactions. The projector augmented wave (PAW) and the generalized gradient approximation of Perdew-Burke-Ernzerhof (PBE-GGA) were adopted. Kinetic energy cutoffs of 50 Ry and 600 Ry, and a uniform mesh of 4 × 4 × 1 k-points were used.

Carbon-Based Electrocatalysts for Acidic Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) is vital for clean and renewable energy technologies, which require no fossil fuel but catalysts. Platinum (Pt) is the best-known catalyst for ORR. However, its high cost and scarcity have severely hindered renewable energy devices (e.g., fuel cells) for large-scale applications. Recent breakthroughs in carbon-based metal-free electrochemical catalysts (C-MFECs) show great potential for earth-abundant carbon materials as low-cost metal-free electrocatalysts towards ORR in acidic media. This article provides a focused, but critical review on C-MFECs for ORR in acidic media with an emphasis on advances in the structure design and synthesis, fundamental understanding of the structure-property relationship and electrocatalytic mechanisms, and their applications in proton exchange membrane fuel cells. Current challenges and future perspectives in this emerging field are also discussed.

Theoretical Study of Oxygen Reduction Reaction Mechanism in Metal-Free Carbon Materials: Defects, Structural Flexibility, and Chemical Reaction

Metal-free carbon materials are attractive Pt-based catalyst alternatives. However, despite efforts, the reaction mechanism remains elusive. Thus, we investigated the role of defects (dopant nitrogen and carbon vacancy) on the catalytic oxygen reduction reaction in a metal-free carbon material focusing on the effect of structural flexibility. Crucially, defects lower the energy barrier for the sp²/sp³ transition of the carbon-centered O₂-adsorption sites by releasing structural strain during the reaction. In particular, low-coordinated pyridinic-N displaces from the carbon plane to release the strain, whereas weak C-C bonds around the carbon vacancy change the bond lengths to release the strain. Defects indirectly promote the adsorption of oxygen by enhancing structural flexibility. Thus, the nonlocal structural environment is as critical as the direct interaction between adsorption sites and adsorbate in the chemical reaction. Molecular dynamics simulations reveal that pyridinic-N doping is a facile route to introduce stable catalytic active sites. Overall, our results provide a deeper understanding of chemical processes on defective carbon materials.

Solid Carbon Spheres with Interconnected Open Pore Channels Enabling High-Efficient Polysulfide Conversion for High-Rate Lithium-Sulfur Batteries

Hollow carbon spheres or core-sheath porous carbon spheres have been widely used in the S cathode of lithium-sulfur batteries. However, the sphere shells or the pore walls may block the free transport of active species to a certain extent and may have a negative influence on the effective accommodation of elemental sulfur. Herein, solid but porous carbon spheres (PNCS) with large porosity and high specific surface area are developed, which enable high sulfur loading and ample cathode/electrolyte contact area, and the interconnected open pore channels significantly shorten the ion/electron transport pathways. Together with high-conducting nitrogen-doped graphene (NG), facilitated polysulfide conversion kinetics is realized in the as-assembled Li-S batteries, which deliver a high initial discharge capacity of 1445 mAh g^-1 at 0.2 C, excellent rate capability of 872 mAh g^-1 at 4 C, and low capacity decay of 0.047% per cycle for 500 cycles at 1 C. Even under high sulfur loading of 5.5 mg cm^-2 and low electrolyte/sulfur (E/S) ratio of 5 μL mg^-1, the Li-S batteries still display high specific capacities of 896 mAh g^-1 and 4.96 mAh cm^-2. The real application of PNCS/NG is also demonstrated by the corresponding Li-S pouch cells showing high discharging capacity and stable open circuit voltage. This work exhibits the promising application of the solid carbon spheres as the S host for effectively addressing the polysulfide shuttle and propelling the development of high-performance Li-S batteries.

Controlled introduction of defects into single-walled carbon nanotubes via a fluorination-defluorination strategy using xenon difluoride and their alkaline oxygen reduction reaction catalytic activity

The defect edges in carbon nanomaterials have attracted attention as catalytic active sites for the oxygen reduction reaction (ORR) of the cathode in electrolyte fuel cells, and the defect control in carbon nanomaterials is becoming increasingly important. This study evaluates a fluorination-defluorination strategy for the controlled introduction of defects into single-walled carbon nanotubes (SWCNTs) involving the fluorination of SWCNTs using xenon difluoride (XeF₂) and their subsequent defluorination through thermal annealing. We synthesized fluorinated SWCNTs with different fluorine contents using gaseous XeF₂ and annealed the fluorinated SWCNTs at 1000 °C for 3 h under nitrogen gas flow. Structural analyses revealed that SWCNTs derived from fluorinated SWCNTs with low fluorine contents primarily had single point defects. In contrast, SWCNTs derived from fluorinated SWCNTs with high fluorine contents had vacancy defects with edges. According to the ORR catalyst evaluation in alkaline aqueous solution, SWCNTs with edge defects, rather than point defects, can improve the efficiency of ORR catalytic activity. The proposed fluorination-defluorination strategy using gaseous XeF₂ is expected to enable the controlled introduction of defects in different types of carbon materials.

Plasmon-Boosted Fe, Co Dual Single-Atom Catalysts for Ultrasensitive Luminol-Dissolved O2 Electrochemiluminescence Detection of Prostate-Specific Antigen

Improving the sensitivity of electrochemiluminescence (ECL) systems is highly desired for in vitro ECL diagnosis and bio-detections due to the often-low content of biomarkers in diseases. And dissolved O₂ (DO) as a co-reactant is considered superior to H₂O₂ in the most commonly used luminol ECL systems due to better stability and low biotoxicity, but it still suffers from low ECL performance due to the low reactivity of DO. In this study, an efficient luminol-DO ECL system was developed through the complexing of Fe, Co dual single-atom catalysts (D-SACs) supported by N-doped graphene with the luminol-capped Ag nanoparticles (AgNPs). Benefiting from the electronic interaction between Fe and Co metal sites in the relevant D-SACs and plasmon enhancement of AgNPs, the performance of the corresponding ECL system could be significantly boosted up to ≈677-fold under optimal testing conditions, comparable to the classic luminol-O₂ system. Furthermore, the developed luminol-DO ECL system was successfully applied for the stable ultrasensitive detection of prostate-specific antigen (PSA) in a wide linear range of 1 fg/mL to 1 μg/mL, with a low limit of detection (0.98 fg/mL).

Recent Advances in Metal-Gas Batteries with Carbon-Based Nonprecious Metal Catalysts

Metal-gas batteries draw a lot of attention due to their superiorities in high energy density and stable performance. However, the sluggish electrochemical reactions and associated side reactions in metal-gas batteries require suitable catalysts, which possess high catalytic activity and selectivity. Although precious metal catalysts show a higher catalytic activity, high cost of the precious metal catalysts hinders their commercial applications. In contrast, nonprecious metal catalysts complement the weakness of cost, and the gap in activity can be made up by increasing the amount of the nonprecious metal active centers. Herein, recent work on carbon-based nonprecious metal catalysts for metal-gas batteries is summarized. This review starts with introducing the advantages of carbon-based nonprecious metal catalysts, followed by a discussion of the synthetic strategy of carbon-based nonprecious metal catalysts and classification of active sites, and finally a summary of present metal-gas batteries with the carbon-based nonprecious metal catalysts is presented. The challenges and opportunities for carbon-based nonprecious metal catalysts in metal-gas batteries are also explored.

A Facile Synthesis of Noble-Metal-Free Catalyst Based on Nitrogen Doped Graphene Oxide for Oxygen Reduction Reaction

A simple method for the mechanochemical synthesis of an effective metal-free electrocatalyst for the oxygen reduction reaction was demonstrated. A nitrogen-doped carbon material was obtained by grinding a mixture of graphene oxide and melamine in a planetary ball mill. The resulting material was characterized by XPS, EPR, and Raman and IR spectroscopy. The nitrogen concentration on the N-bmGO surface was 5.5 at.%. The nitrogen-enriched graphene material (NbmGO has half-wave potential of -0.175/-0.09 V and was shown to possess high activity as an electrocatalyst for oxygen reduction reaction. The electrocatalytic activity of NbmGO can be associated with a high concentration of active sites for the adsorption of oxygen molecules on its surface. The high current retention (93% for 12 h) after continuous polarization demonstrates the excellent long-term stability of NbmGO.

Defective porous carbon microrods derived from fullerenes (C70) as high-performance electrocatalysts for the oxygen reduction reaction

Disrupting the integrity of the sp²-carbon skeleton offers an effective strategy to create active sites for the oxygen reduction reaction (ORR). In this work, fullerene (C₇₀) molecules, composed of 12 pentagons and 25 hexagons all bonded by sp²-C atoms, are assembled into microrods (C70MRs) at the liquid-liquid interface and then broken down by calcination to generate metal-free fullerene-derived ORR electrocatalysts. The effect of the pyrolysis temperature on C70MRs is investigated, and it is found that pyrolysis at 900 °C effectively unfolds the C₇₀ cages and converts them into a highly porous, defect-rich carbon material (C70MRs-900) with the rod-shaped morphology well-retained. These structural features endow C70MRs-900 with outstanding ORR activity and stability together with remarkable methanol tolerance, better than C70MRs annealed at either lower (800 °C) or higher (1000 °C) temperatures. Furthermore, nitrogen atoms are successfully incorporated into the defective carbon skeleton by annealing C70MRs at 900 °C in the presence of NH₄Cl. The resultant N-doped C70MRs-900 exhibits remarkable ORR performance with a half-wave potential of 0.836 V, comparable to that of the commercial 20% Pt/C catalyst. This work presents a simple and effective route of utilizing fullerene molecules as starting materials to develop high-performance metal-free, carbon-based electrocatalysts toward the ORR and even beyond.

Molecular Engineering toward High-Crystallinity Yet High-Surface-Area Porous Carbon Nanosheets for Enhanced Electrocatalytic Oxygen Reduction

Carbon-based nanomaterials have been regarded as promising non-noble metal catalysts for renewable energy conversion system (e.g., fuel cells and metal-air batteries). In general, graphitic skeleton and porous structure are both critical for the performances of carbon-based catalysts. However, the pursuit of high surface area while maintaining high graphitization degree remains an arduous challenge because of the trade-off relationship between these two key characteristics. Herein, a simple yet efficient approach is demonstrated to fabricate a class of 2D N-doped graphitized porous carbon nanosheets (GPCNSs) featuring both high crystallinity and high specific surface area by utilizing amine aromatic organoalkoxysilane as an all-in-one precursor and FeCl3 ·6H2 O as an active salt template. The highly porous structure of the as-obtained GPCNSs is mainly attributed to the alkoxysilane-derived SiOx nanodomains that function as micro/mesopore templates; meanwhile, the highly crystalline graphitic skeleton is synergistically contributed by the aromatic nucleus of the precursor and FeCl3 ·6H2 O. The unusual integration of graphitic skeleton with porous structure endows GPCNSs with superior catalytic activity and long-term stability when used as electrocatalysts for oxygen reduction reaction and Zn-air batteries. These findings will shed new light on the facile fabrication of highly porous carbon materials with desired graphitic structure for numerous applications.