Size‐Controlled Synthesis of Platinum–Copper Hierarchical Trigonal Bipyramid Nanoframes

A Biphasic Strategy to Synergistically Accelerate Activation and CO Spillover in Formic Acid Oxidation Catalysis

Developing highly efficient and carbon monoxide (CO)-tolerant platinum (Pt) catalysts for the formic acid oxidation reaction (FAOR) is vital for direct formic acid fuel cells (DFAFCs), yet it is challenging due to the high energy barrier of direct intermediates (HCOO* and COOH*) as well as the CO poisoning issues associated with Pt alloy catalysts. Here we present a versatile biphasic strategy by creating a hexagonal/cubic crystalline-phase-synergistic PtPb/C (h/c-PtPb/C) catalyst to tackle the aforementioned issues. Detailed investigations reveal that h/c-PtPb/C can simultaneously facilitate the adsorption of direct intermediates while inhibiting CO adsorption, thereby significantly improving the activation and CO spillover. As a result, h/c-PtPb/C showcases an outstanding FAOR activity of 8.1 A mgPt-1, which is 64.5 times higher than that of commercial Pt/C and significantly surpasses monophasic PtPb. Moreover, the h/c-PtPb/C-based membrane electrode assembly exhibits an exceptional peak power density of 258.7 mW cm-2 for practical DFAFC applications.

Highly Selective Synthesis of Monoclinic-Phased Platinum-Tellurium Nanotrepang for Direct Formic Acid Oxidation Catalysis

Designing efficient formic acid oxidation reaction (FAOR) catalysts with remarkable membrane electrode assembly (MEA) performance in a direct formic acid fuel cell (DFAFC) medium is significant yet challenging. Herein, we report that the monoclinic-phased platinum-tellurium nanotrepang (m-PtTe NT) can be adopted as a highly active, selective, and stable FAOR catalyst with a desirable direct reaction pathway. The m-PtTe NT exhibits the high specific and mass activities of 6.78 mA cm^-2 and 3.2 A mg_Pt^-1, respectively, which are 35.7/22.9, 2.8/2.6, and 3.9/2.9 times higher than those of commercial Pt/C, rhombohedral-phased Pt₂Te₃ NT (r-Pt₂Te₃ NT), and trigonal-phased PtTe₂ NT (t-PtTe₂ NT), respectively. Simultaneously, the highest reaction tendency for the direct FAOR pathway and the best tolerance to poisonous CO intermediate can also be realized by m-PtTe NT. More importantly, even in a single-cell medium, the m-PtTe NT can display a much higher MEA power density (171.4 mW cm^-2) and stability (53.2% voltage loss after 5660 s) than those of commercial Pt/C, demonstrating the great potential in operating DFAFC device. The in-situ Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy jointly demonstrate that the unique nanostructure of m-PtTe NT can effectively optimize dehydrogenation steps and inhibit the CO intermediate adsorption, as well as promote the oxidation of noxious CO intermediate, thus achieving the great improvement of FAOR activity, poisoning tolerance, and stability. Density functional theory calculations further reveal that the direct pathway is the most favorable on m-PtTe NT than r-Pt₂Te₃ NT and t-PtTe₂ NT. The higher activation energy to produce CO and the relatively weaker binding with CO of m-PtTe NT result in the better CO tolerance. This work achieves remarkable FAOR and MEA performances of advanced Pt-based anodic catalysts for DFAFCs via a phase engineering strategy.

Platinum-Lead-Bismuth/Platinum-Bismuth Core/Shell Nanoplate Achieves Complete Dehydrogenation Pathway for Direct Formic Acid Oxidation Catalysis

Designing platinum (Pt)-based formic acid oxidation reaction (FAOR) catalysts with high performance and high selectivity of direct dehydrogenation pathway for direct formic acid fuel cell (DFAFC) is desirable yet challenging. Herein, we report a new class of surface-uneven PtPbBi/PtBi core/shell nanoplates (PtPbBi/PtBi NPs) as the highly active and selective FAOR catalysts, even in the complicated membrane electrode assembly (MEA) medium. They can achieve unprecedented specific and mass activities of 25.1 mA cm^-2 and 7.4 A mg_Pt^-1 for FAOR, 156 and 62 times higher than those of commercial Pt/C, respectively, which is the highest for a FAOR catalyst by far. Simultaneously, they show highly weak adsorption of CO and high dehydrogenation pathway selectivity in the FAOR test. More importantly, the PtPbBi/PtBi NPs can reach the power density of 161.5 mW cm^-2, along with a stable discharge performance (45.8% decay of power density at 0.4 V for 10 h), demonstrating great potential in a single DFAFC device. The in situ Fourier transform infrared spectroscopy (FTIR) and X-ray absorption spectroscopy (XAS) results collectively reveal a local electron interaction between PtPbBi and PtBi. In addition, the high-tolerance PtBi shell can effectively inhibit the production/adsorption of CO, resulting in the complete presence of the dehydrogenation pathway for FAOR. This work demonstrates an efficient Pt-based FAOR catalyst with 100% direct reaction selectivity, which is of great significance for driving the commercialization of DFAFC.

Pt Nanoflowers as a Highly Effective Electrocatalyst for Glucose Oxidation in Abiotic Glucose Fuel Cells

Self-powered implantable medical devices (IMDs) without any external power supply are desired in a growing number of situations. Glucose fuel cells (GFCs) that convert the chemical energy of intrinsic glucose and oxygen into electricity are promising technology to achieve this goal. Herein, a Pt nanoflower (Pt NF) catalyst is prepared by using a facile one-step reduction method and employed as the anode catalyst for abiotic GFCs in a neutral environment at a physiological concentration of glucose. The Pt NF catalyst exhibits high electrocatalytic activity, catalytic selectivity, and good durability in the electrochemical analysis. The Pt NF's rapid linear current response to the variation of glucose concentration within a wide range also makes it a promising material for glucose sensors. A GFC with two chambers fabricated with a Pt NF catalyst-decorated carbon paper (Pt NFs/CP) anode and a Pt sheet cathode generates a maximum power density (P_max) of 13.8 μW cm^-2, an open-circuit voltage (V_OC) of 819.5 mV, and a short-circuit current density (J_SC) of 0.12 mA cm^-2, which makes it a viable candidate for application in self-powered devices.

Sandwich-type electrochemical aptasensor based on Au-modified conductive octahedral carbon architecture and snowflake-like PtCuNi for the sensitive detection of cardiac troponin I

The cardiac troponin I (cTnI) detection is increasingly significant given its promising value in the clinical acute myocardial infarction diagnosis. Here a sensitive sandwich-type cTnI electrochemical aptasensor was developed by using zirconium-carbon loaded with Au (Au/Zr-C) as electrode-modified material and snowflake-like PtCuNi catalyst as label material. The Au/Zr-C was prepared from a carbonation process and a reduction step. The PtCuNi was synthesized by a one-pot hydrothermal reaction. On the one hand, due to its many merits of large effective area, rich pores, high degree of graphitization, the assistance of Au, the Au/Zr-C exhibited remarkable electronic conductivity but low catalytical capacity, thus improving the electrochemical property but lowing the background signal of electrode. On the other hand, because of its accessible active sites of the special snowflake-like structure and the synergy of three elements, the PtCuNi catalyst presented excellent catalytic activity and improved stability compared to binary alloy. The recognition reactions were achieved by stepwise incubation of aptamer 1, cTnI, and aptamer 2-PtCuNi (denoted as Apt2-label) on the Au/Zr-C-modified electrode. The electrocatalytic signals of the immobilized Apt2-label towards the H₂O₂ reduction were recorded in all tests for cTnI analysis. Consequently, this cTnI aptasensor exhibited excellent performance involving a wide linear range of 100 ng mL^-1 to 0.01 pg mL^-1 with a detection limit of 1.24 × 10^-3 pg mL^-1 (S/N = 3), good selectivity, satisfying reproducibility, outstanding stability, and good recovery.

Enhancing the magnetic response on polycrystalline nanoframes through mechanical deformation

The mechanical and magnetic properties of polycrystalline nanoframes were investigated using atomistic molecular dynamics and micromagnetic simulations. The magneto-mechanical response of Fe hollow-like nanocubes was addressed by uniaxial compression carried out by nanoindentation. Our results show that the deformation of a nanoframe is dominated at lower strains by the compression of the nanostructure due to filament bending. This leads to the nanoframe twisting perpendicular to the indentation direction for larger indentation depths. Bending and twisting reduce stress concentration and, at the same time, increase coercivity. This unexpected increase of the coercivity occurs because the mechanical deformation changes the cubic shape of the nanoframe, which in turn drives the system to more stable magnetic states. A coercivity increase of almost 100 mT is found for strains close to 0.03, which are within the elastic regime of the Fe nanoframe. Coercivity then decreases at larger strains. However, in all cases, the coercivity is higher than for the undeformed nanoframe. These results can help in the design of new magnetic devices where mechanical deformation can be used as a primary tool to tailor the magnetic response on nanoscale solids.

Mesoporous PdBi nanocages for enhanced electrocatalytic performances by all-direction accessibility and steric site activation

An effective yet simple approach was developed to synthesize mesoporous PdBi nanocages for electrochemical applications. This technique relies on the subtle utilization of the hydrolysis of a metal salt to generate precipitate cores in situ as templates for navigating the growth of mesoporous shells with the assistance of polymeric micelles. The mesoporous PdBi nanocages are then obtained by excavating vulnerable cores and regulating the crystals of mesoporous metallic skeletons. The resultant mesoporous PdBi nanocages exhibited excellent electrocatalytic performance toward the ethanol oxidation reaction with a mass activity of 3.56 A mg-1_Pd, specific activity of 17.82 mA cm-2 and faradaic efficiency of up to 55.69% for C1 products.

Degradable mesoporous semimetal antimony nanospheres for near-infrared II multimodal theranostics

Metallic and semimetallic mesoporous frameworks are of great importance owing to their unique properties and broad applications. However, semimetallic mesoporous structures cannot be obtained by the traditional template-mediated strategies due to the inevitable hydrolytic reaction of semimetal compounds. Therefore, it is yet challenging to fabricate mesoporous semimetal nanostructures, not even mention controlling their pore sizes. Here we develop a facile and robust selective etching route to synthesize monodispersed mesoporous antimony nanospheres (MSbNSs). The pore sizes of MSbNSs are tunable by carefully controlling the partial oxidation of Sb nuclei and the selective etching of the as-formed Sb₂O₃. MSbNSs show a wide absorption from visible to second near-infrared (NIR-II) region. Moreover, PEGylated MSbNSs are degradable and the degradation mechanism is further explained. The NIR-II photothermal performance of MSbNSs is promising with a high photothermal conversion efficiency of ~44% and intensive NIR-II photoacoustic signal. MSbNSs show potential as multifunctional nanomedicines for NIR-II photoacoustic imaging guided synergistic photothermal/chemo therapy in vivo. Our selective etching process would contribute to the development of various semimetallic mesoporous structures and efficient multimodal nanoplatforms for theranostics.

Hierarchically Fractal Co with Highly Exposed Active Facets and Directed Electron-Transfer Effect

Hierarchically fractal Co with highly exposed active (002) facets, possessing higher work function and more moderate hygrogen adsorption free energy, has been synthesized via template-free self-assembly method for directed electron-transfer...

Evolution of PtCu tripod nanocrystals to dendritic triangular nanocrystals and study of the electrochemical performance to alcohol electrooxidation

In the field of catalysis, the design and construction of nanomaterials is an efficient way to optimize the catalytic activity of catalysts. This study presents the synthesis of PtCu tripod nanocrystals with branching structures and high purity prepared using a simple hydrothermal method. The dendritic PtCu triangular nanocrystals were successfully synthesized by regulating the amount of I^- ions to achieve different degrees of branching on PtCu nanocrystals, and the process was systematically studied and analyzed. Meanwhile, dumbbell nanocrystals of PtCu were successfully synthesized through slight adjustments to synthesis conditions. In electrochemical tests, the obtained dendritic PtCu triangular nanocrystals exhibited prominent electrocatalytic activity and long-term stability for ethylene glycol, methanol, and ethanol oxidation reactions due to the unique nanostructures as well as alloyed virtue, and were much better than commercial Pt/C. In addition, this study provides a general strategy for designing novel branched Pt-based nanomaterials with high electrocatalytic performance.

Hierarchically Fractal PtPdCu Sponges and their Directed Mass- and Electron-Transfer Effects

Fractal Pt-based materials with hierarchical structures and high self-similarity have attracted more and more attention due to their bioinspiring maximum optimization of energy utilization and mass transfer. However, their high-efficiency design of the mass- and electron-transfer still remains to be a great challenge. Herein, fractal PtPdCu hollow sponges (denoted as PtPdCu-HS) facilitating both directed mass- and electron-transfer are presented. Such directed transfer effects greatly promote electrocatalytic activity, regarded as 3.9 times the mass activity, 7.3 times the specific activity, higher poison tolerance, and higher stability than commercial Pt/C for the methanol oxidation reaction (MOR). A new "directed mass- and electron-transfer" concept, characteristics, and mechanism are proposed at the micro/nanoscale to clarify the structural design and functional enhancement of fractal electrocatalyst. This work displays new possibilities for designing novel nanomaterials with high activity and superior stability toward electrocatalysis or other practical applications.

In-situ loading synthesis of graphene supported PtCu nanocube and its high activity and stability for methanol oxidation reaction

A perfect PtCu nanocube with partial hollow structure was prepared by hydrothermal reaction and its electrocatalytic methanol oxidation reaction (MOR) was studied. The appropriate concentration of shape-control additives KI and triblock pluronic copolymers, poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO₁₉-PPO₆₉-PEO₁₉) (P123) play crucial roles in the final product morphology. The PtCu nanocubes can be perfectly in situ immobilizedonto graphene under the action of P123 while the structure and cubic morphologyremain unchanged. The electrochemical tests suggest that the obtained PtCu nanocube (PtCu-NCb) exhibits better MOR activity and stability than PtCu hexagon nanosheet (PtCu-NSt), PtCu nanoellipsoid (PtCu-NEs) and commercial Pt/C in alkaline medium. When in situ immobilized onto graphene, the MOR catalytic activity and stability of PtCu cubes are further improved. The markedly enhanced electrocatalytic activity and durability maybe attributed to the special cubic morphology with partial hollow structure enclosed by highly efficient facet and the probably the synergistic effect of PtCu and intermediate state CuI decorated on the surface and graphene.

Twin-Directed Deposition of Pt on Pd Icosahedral Nanocrystals for Catalysts with Enhanced Activity and Durability toward Oxygen Reduction

Platinum nanocrystals featuring a multiply twinned structure and uniform sizes below 5 nm are superb catalytic materials, but it is difficult to synthesize such particles owing to the high twin-boundary energy (166 mJ/m²) of Pt. Here, we report a simple route to the synthesis of such nanocrystals by selectively growing them from the vertices of Pd icosahedral seeds. The success of this synthesis critically depends on the introduction of Br^- ions to slow the reduction kinetics of the Pt(II) precursor while limiting the surface diffusion of Pt adatoms by conducting the synthesis at 30 °C. Owing to the small size and multiply twinned structure of Pt dots, the as-obtained Pd-Pt nanocrystals show remarkably enhanced activity and durability toward oxygen reduction, with a mass activity of 1.23 A mg^-1_Pt and a specific activity of 0.99 mA cm^-2_Pt, which are 8.2 and 4.5 times as high as those of the commercial Pt/C.

A monodispersed CuPt alloy: synthesis and its superior catalytic performance in the hydrogen evolution reaction over a full pH range

The high cost and low stability of electrocatalysts are the major challenges for the commercialization of hydrogen generation in water. In this study, we demonstrated a one-pot synthesis of a monodispersed CuPt alloy with the diameter range of 20–30 nm by a hydrothermal method. Benefiting from the more available active sites and preferable d-band structure, the CuPt alloy exhibited a superior catalytic performance than pure Pt nanoparticles (Pt NPs) in the hydrogen evolution reaction (HER). In acidic media, the CuPt alloy achieved a low overpotential of 39 mV at a current density of 10 mA cm⁻² for HER, which was by 22 mV lower than that for pure Pt NPs. In a neutral solution, the stability of the CuPt alloy is ca. 100-fold as compared to pure Pt NPs. Accounting by the dissolution of Cu in the alloy phase, the performance of the CuPt alloy was elevated after yielding hydrogen for 1.2 × 10⁵ s in alkaline media. The superior catalytic activity can also be applied in other applications. In the reduction of 4-nitro-phenol (4-NP), the CuPt alloy showed 12.84-fold catalytic activity higher than pure Pt NPs. This study designed a low-cost electrocatalyst with an efficient and durable catalytic performance for HER over the full pH range, which provides an environmentally friendly strategy to cope with the challenges of hydrogen generation.

An effective approach to achieve the low cost and high stability of electro-catalysts for HER.

Polymer based nanoparticles for biomedical applications by microfluidic techniques: from design to biological evaluation

The development of microfluidic technologies represents a new strategy to produce and test drug delivery systems.

Phase Segregated Pt-SnO2 /C Nanohybrids for Highly Efficient Oxygen Reduction Electrocatalysis

Strengthening the interfacial interaction in heterogeneous catalysts can lead to a dramatic improvement in their performance and allow the use of smaller amounts of active noble metal, thus decreasing the cost without compromising their activity. In this work, a facile phase-segregation method is demonstrated for synthesizing platinum-tin oxide hybrids supported on carbon black (PtSnO₂ /C) in situ by air annealing PtSn alloy nanoparticles on carbon black. Compared with a control sample formed by preloading SnO₂ on carbon support followed by deposition of Pt nanoparticles, the phase-segregation-derived PtSnO₂ /C exhibits a more strongly coupled PtSnO₂ interface with lattice overlap of Pt (111) and SnO₂ (200), along with enhanced electron transfer from SnO₂ to Pt. Furthermore, the PtSnO₂ active sites show a strong ability to degrade reactive oxygen species. As a result, the PtSnO₂ /C nanohybrids exhibit both excellent activity and stability as a catalyst for the oxygen reduction reaction, with an overall performance which is superior to both the control sample and commercial Pt/C catalyst. This phase-segregation method can be expected to be applicable in the preparation of other strongly coupled nanohybrids and offers a new route to high-performance heterogeneous catalysts for low-cost energy conversion devices.

Paper-based electrochemiluminescence determination of streptavidin using reticular DNA-functionalized PtCu nanoframes and analyte-triggered DNA walker

A paper-based electrochemiluminescence (ECL) biosensor characterized by the signal amplification of reticular DNA-functionalized PtCu nanoframes (DNA-PtCuTNFs) and analyte-triggered DNA walker was developed for sensitive streptavidin assay. Silver microflower functionalized paper-based sensing platform was prepared to fix the hairpin strand (S1). With addition of the streptavidin, plenty of DNA walkers consisting of the walking strands (S2) labeled with biotin and streptavidin were established, which protected S2 from digestion via the terminal protection mechanism. The sequential introduction of the DNA walker and capture probe initiated the hairpin structure opening of S1 and strand displacement reaction (SDR) happening, causing the S2 release. Subsequently, S1 hybridized with S3. The free S2 further hybridized with adjacent S1 to trigger the next cycle. After multiple cycles, the DNA-PtCuTNFs, the fire-new signal enhancer, with remarkable peroxidase activity, were successfully attached onto the paper electrode via metal-catalyst-free click chemistry. Based on the SDR of the DNA walker and the catalysis of DNA-PtCuTNFs, a significantly boosted ECL signal of luminol was obtained. Under the optimal conditions, the developed sensor for streptavidin assay exhibited a low detection limit of 33.4 fM with a linear range from 0.1 pM to 0.1 μM. Graphical abstract.

Atomic-scale study of nanocatalysts by aberration-corrected electron microscopy

Aberration-corrected electron microscopy (AC-EM) including transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) has become one of the most powerful technologies in the studies of nanocatalysts. With the current spatial resolution of sub-0.5 Å and energy resolution of 10 meV, AC-EM can quantificationally articulate the connection between catalytic properties and atomic configurations of nanocatalysts. However, the restricted irradiation sensitive characteristics of specimens pose an obstacle to solve their intrinsic structure. Low-dose imaging should be applied to overcome this problem. In addition, the choice of appropriate imaging method is also crucial to tackle specific structural problems of nanocatalysts. On the basis of careful management of electron dose and selection of suitable imaging method,in situgas and liquid S/TEM are able to reveal the structure evolution of nanocatalysts in real-time. Further combination with residual gas analysis would deepen the understanding of the catalytic reaction.

Unexpectedly high stability and surface reconstruction of PdAuAg nanoparticles for formate oxidation electrocatalysis

High-performance Pd-based nanocatalysts for alkaline methanol and formate fuel cells have stimulated widespread attention. Hence, a series of ternary Pd-Au-Ag nanoalloys have been synthesized on carbon nanotubes, which demonstrate promising activity and unexpectedly high stability for the formate oxidation reaction (FOR) in alkaline medium. The ternary Pd3Au3Ag1 nanoalloy catalyst showed an initial mass activity of 4.51 A mgPd-1 and a retained mass activity of 1.32 A mgPd-1 after chronoamperometric measurement for 3600 s, which are superior to the best values for all FOR catalysts reported so far. The Pd3Au3Ag1 catalyst also showed a good specific activity of 4.32 mA cm-2 for the methanol oxidation reaction. Furthermore, surface reconstruction of the Pd3Au3Ag1 nanoalloy was observed during FOR, where the activity of Pd3Au3Ag1 catalysts increased up to 33% and the cycling durability retained 55% after cyclic voltammetry with the upper potential of 1.7 V. The FOR enhancement is attributed to the formation of mixed oxidation-state Ag sites and the increase in the Pd surface coverage, and provides a new prospect for the design of ternary nanoalloy electrocatalysts for various fuel oxidation reactions.

Modern Chemical Routes for the Controlled Synthesis of Anisotropic Bimetallic Nanostructures and Their Application in Catalysis

Bimetallic nanoparticles (BNPs) have attracted greater attention compared to its monometallic counterpart because of their chemical/physical properties. The BNPs have a wide range of applications in the fields of health, energy, water, and environment. These properties could be tuned with a number of parameters such as compositions of the bimetallic systems, their preparation method, and morphology. Monodisperse and anisotropic BNPs have gained considerable interest and numerous efforts have been made for the controlled synthesis of bimetallic nanostructures (BNS) of different sizes and shapes. This review offers a brief summary of the various synthetic routes adopted for the synthesis of Palladium(Pd), Platinum(Pt), Nickel(Ni), Gold(Au), Silver(Ag), Iron(Fe), Cobalt(Co), Rhodium(Rh), and Copper(Cu) based transition metal bimetallic anisotropic nanostructures, growth mechanisms e.g., seed mediated co-reduction, hydrothermal, galvanic replacement reactions, and antigalvanic reaction, and their application in the field of catalysis. The effect of surfactant, reducing agent, metal precursors ratio, pH, and reaction temperature for the synthesis of anisotropic nanostructures has been explained with examples. This review further discusses how slight modifications in one of the parameters could alter the growth mechanism, resulting in different anisotropic nanostructures which highly influence the catalytic activity. The progress or modification implied in the synthesis techniques within recent years is focused on in this article. Furthermore, this article discussed the improved activity, stability, and catalytic performance of BNS compared to the monometallic performance. The synthetic strategies reported here established a deeper understanding of the mechanisms and development of sophisticated and controlled BNS for widespread application.

Single-atom Rh/N-doped carbon electrocatalyst for formic acid oxidation

To meet the requirements of potential applications, it is of great importance to explore new catalysts for formic acid oxidation that have both ultra-high mass activity and CO resistance. Here, we successfully synthesize atomically dispersed Rh on N-doped carbon (SA-Rh/CN) and discover that SA-Rh/CN exhibits promising electrocatalytic properties for formic acid oxidation. The mass activity shows 28- and 67-fold enhancements compared with state-of-the-art Pd/C and Pt/C, respectively, despite the low activity of Rh/C. Interestingly, SA-Rh/CN exhibits greatly enhanced tolerance to CO poisoning, and Rh atoms in SA-Rh/CN resist sintering after long-term testing, resulting in excellent catalytic stability. Density functional theory calculations suggest that the formate route is more favourable on SA-Rh/CN. According to calculations, the high barrier to produce CO, together with the relatively unfavourable binding with CO, contribute to its CO tolerance.

Tunable long-chains of core@shell PdAg@Pd as high-performance catalysts for ethanol oxidation

High performance nanomaterial catalysts have attracted great attention on the application for the direct alcohol fuel cell. To improve the catalytic behavior, it is a challenge to modulate the surface structure and morphology of catalysts. We integrated properties of advanced networks nanostructure and core@shell structure to form a series of PdAg@Pd worm-like networks catalysts. Importantly, the composition-optimized Pd₇₆Ag₂₄ WNWs exhibited excellent catalytic performance towards ethanol oxidation reaction compared to that of commercial Pd/C catalysts in alkaline media. The mass activity of Pd₇₆Ag₂₄ WNWs is 3.55 times higher than that of commercial Pd/C catalysts for EOR. Moreover, the Pd₇₆Ag₂₄ WNWs also showed superior stability after 250 successive cycles and kept far higher residual activities than that of the other catalysts. The synthesis of PdAg@Pd worm-like networks catalysts provides a reference to well combine the advantages of core@shell and networks structure to form high performance catalysts application for DEFC.

Regulating Hydrogenation Chemoselectivity of α,β-Unsaturated Aldehydes by Combination of Transfer and Catalytic Hydrogenation

Two hydrogenation mechanisms, transfer and catalytic hydrogenation, were combined to achieve higher regulation of hydrogenation chemoselectivity of cinnamyl aldehydes. Transfer hydrogenation with ammonia borane exclusively reduced C=O bonds to get cinnamyl alcohol, and Pt-loaded metal-organic layers efficiently hydrogenated C=C bonds to synthesize phenyl propanol with almost 100 % conversion rate. The hydrogenation could be performed under mild conditions without external high-pressure hydrogen and was applicable to various α,β-unsaturated aldehydes.

Monodispersed bimetallic platinum-copper alloy nanospheres as efficient catalysts for ethylene glycol electrooxidation

Designing and fabricating highly active and efficient catalysts are of vital importance for the practical applications of direct ethylene glycol fuel cells (DEGFCs). In this study, we employ a feasible one-pot synthetic method to construct highly monodispersed PtCu nanospheres (NSs) as high-efficiency anode electrocatalysts for DEGFCs. Interestingly, the optimized carbon supported Pt₁Cu₁ NSs can display the highest mass activity of 2146.9 mA mg^-1 in 1 M KOH + 1 M EG solution under the scan rate of 50 mV s^-1, which is 1.9 times higher than that of commercial Pt/C catalysts. This is ascribed to the favorable electronic effect between Pt and Cu, which is beneficial for ethylene glycol oxidation reaction (EGOR) in fuel cells. Meanwhile, such monodispersed Pt₁Cu₁ NSs can also exhibit excellent durability, where the Pt₁Cu₁ catalyst retains 62.6% of the initial value after the cyclic voltammetry of 500 cycles. This work not only provides a significant approach for designing catalysts for fuel cells, but also constructs a novel class of active and stable electrocatalysts for EGOR.

Highly Excavated Octahedral Nanostructures Integrated from Ultrathin Mesoporous PtCu3 Nanosheets: Construction of Three-Dimensional Open Surfaces for Enhanced Electrocatalysis

Developing electrocatalysts with ultrathin nanostructures and high mesoporosity is a relevant high-priority research direction toward enhancing the performance of noble metals. Herein, mesoporous, highly excavated octahedral PtCu₃ nanostructures are prepared by a facile one-pot synthesis. The mesoporous, highly excavated octahedral PtCu₃ nanostructures are built with mutually perpendicular interlaced mesoporous nanosheets with a thickness of ≈4.5 nm. Benefiting from its mesoporous features, three-dimensional (3D) open surfaces, ultrathin nanosheets, and a Cu-rich surface, PtCu₃ exhibits excellent electrocatalytic performance and high antipoisoning activity toward the methanol oxidation reaction.

Dendritic defect-rich palladium-copper-cobalt nanoalloys as robust multifunctional non-platinum electrocatalysts for fuel cells

Recently, the development of high-performance non-platinum electrocatalysts for fuel cell applications has been gaining attention. Palladium-based nanoalloys are considered as promising candidates to substitute platinum catalysts for cathodic and anodic reactions in fuel cells. Here, we develop a facile route to synthesize dendritic palladium–copper–cobalt trimetallic nanoalloys as robust multifunctional electrocatalysts for oxygen reduction and formic acid oxidation. To the best of our knowledge, the mass activities of the dendritic Pd₅₉Cu₃₀Co₁₁ nanoalloy toward oxygen reduction and formic acid oxidation are higher than those previously reported for non-platinum metal nanocatalysts. The Pd₅₉Cu₃₀Co₁₁ nanoalloys also exhibit superior durability for oxygen reduction and formic acid oxidation as well as good antimethanol/ethanol interference ability compared to a commercial platinum/carbon catalyst. The high performance of the dendritic Pd₅₉Cu₃₀Co₁₁ nanoalloys is attributed to a combination of effects, including defects, a synergistic effect, change of d-band center of palladium, and surface strain.

Fuel cells are promising for sustainable energy generation, but are limited by the performance of electrocatalysts. Here the authors synthesize dendritic palladium–copper–cobalt nanoalloys with electrocatalytic activity for oxygen reduction and formic acid oxidation as well as alcohol tolerance.

Shape-Controlled Synthesis of Platinum-Copper Nanocrystals for Efficient Liquid Fuel Electrocatalysis

Well-defined noble metal nanomaterials are attractive as catalysts for various applications because of abundant surface-active sites. However, the shape-controlled synthesis of high-performance Pt-based nanocatalysts remains a forbidden challenge. We herein demonstrate a versatile approach for realizing the systemically controlled syntheses of bimetallic Pt-Cu nanocrystals (NCs) from concave nanocubes (CNCs), to excavated nanocubes, to tripods via simply switching the amount of glycine (reducing agent). These Pt-Cu nanostructures supply a desirable platform for carrying out the structure-dependent electrocatalytic studies in the liquid fuel electro-oxidation. Impressively, all of the Pt-Cu NCs show high activity and outstanding durability for alcohol oxidation. In particular, the Pt-Cu CNCs display unprecedent high activity toward MOR and EOR, which are found to be 2041.1 and 5760.9 mA mg^-1 in mass activity, 7.9- and 11.5-folds greater than the commercial Pt/C catalysts, respectively, showing a promising class of electrocatalysts for fuel cells. This work sheds great promise for optimizing the electrochemical catalysis by precisely modulating the structure of catalysts.

Hierarchical concave layered triangular PtCu alloy nanostructures: rational integration of dendritic nanostructures for efficient formic acid electrooxidation

The rational construction of multi-dimensional layered noble metal nanostructures is a great challenge since noble metals are not layer-structured materials. Herein, we report a one-pot hydrothermal synthetic method for PtCu hierarchical concave layered triangular (HCLT) nanostructures using dl-carnitine, KI, poly(vinylpyrrolidone), CuCl2, and H2PtCl6. The PtCu HCLT nanostructure is comprised of multilayered triangular dendrites. Its layer number is tunable by changing dl-carnitine concentrations, and the concavity/convexity of the PtCu triangle nanostructures is tunable by changing the H2PtCl6/CuCl2 ratio or KI concentrations. Hierarchical trigonal bipyramid nanoframes are also obtained under certain conditions. Because of its advantageous nanostructure and bimetallic synergetic effect, the obtained PtCu HCLT nanostructure exhibits enhanced electrocatalytic activity and prolonged stability to formic acid oxidation compared to commercial Pt black, Pd/C and some other nanostructures.

Particle size effects of PtAg nanoparticles on the catalytic electrooxidation of liquid fuels

The electrocatalytic oxidation of ethylene glycol and glycerol in the presence of PtAg NPs catalyst showed a linear decrease with the increasing particle sizes, providing new clues and hypotheses on how quantum confinement phenomena affect the electrocatalytic performances.

Design of Ultrathin Pt-Based Multimetallic Nanostructures for Efficient Oxygen Reduction Electrocatalysis

Nanocatalysts with high platinum (Pt) utilization efficiency are attracting extensive attention for oxygen reduction reactions (ORR) conducted at the cathode of fuel cells. Ultrathin Pt-based multimetallic nanostructures show obvious advantages in accelerating the sluggish cathodic ORR due to their ultrahigh Pt utilization efficiency. A focus on recent important developments is provided in using wet chemistry techniques for making/tuning the multimetallic nanostructures with high Pt utilization efficiency for boosting ORR activity and durability. First, new synthetic methods for multimetallic core/shell nanoparticles with ultrathin shell sizes for achieving highly efficient ORR catalysts are reviewed. To obtain better ORR activity and stability, multimetallic nanowires or nanosheets with well-defined structure and surface are further highlighted. Furthermore, ultrathin Pt-based multimetallic nanoframes that feature 3D molecularly accessible surfaces for achieving more efficient ORR catalysis are discussed. Finally, the remaining challenges and outlooks for the future will be provided for this promising research field.

Finely Composition-Tunable Synthesis of Ultrafine Wavy PtRu Nanowires as Effective Electrochemical Sensors for Dopamine Detection

Preparing Pt-based one-dimensional (1D) ultrafine nanowires with abundant structural defects/grain boundaries and exploring their novel applications have attracted great interest in real-world applications. Here we introduce an environmentally friendly, facile aqueous solution approach to directly prepare a series of sub-3.0 nm PtRu ultrafine wavy nanowires. Characterizations show that the PtRu nanowires are alloy polycrystalline structures with abundant structural defects/grain boundaries. We first introduce the as-synthesized PtRu nanowires into electrochemical biosensors for the detection of DA and find that the Pt₇Ru₃ nanowires exhibit excellent electrocatalytic activity to DA with fast response, ultralow limit of detection, and excellent selectivity at a potential of 0.3 V in 0.1 M phosphate buffered solution (pH 7.2). This study shows an effective approach to the development of ultrafine PtRu nanowires as electrocatalysts for electrochemical nonenzymatic dopamine biosensors.

One-pot synthesis of dendritic Pt3Ni nanoalloys as nonenzymatic electrochemical biosensors with high sensitivity and selectivity for dopamine detection

Preparation of Pt-based nanocatalysts with high catalytic activity and exploration of their novel applications have attracted significant interest in the nanoscale field. Herein, we report a facile synthesis of dendritic Pt₃Ni nanoalloys and their applications for electrochemical nonenzymatic dopamine biosensors. As a result of their unique structure, the dendritic Pt₃Ni nanoalloys show high electrocatalytic activity towards dopamine oxidation. Amperometric dopamine biosensors based on dendritic Pt₃Ni nanoalloy microelectrode exhibit a wide linear detection ranges from 0.5 μM to 250 μM with ultrahigh sensitivity, fast response, and excellent selectivity at a potential of 0.3 V in a 0.1 M phosphate buffered solution (pH = 7.2). The limit of detection on dendritic Pt₃Ni nanoalloy microelectrodes can decrease down to 10 nM, which is the least concentration of dopamine in serum samples with a value of sensitivity up to 4.6 μA mg^-1_Pt cm^-2. This study shows an effective approach for the development of dendritic Pt₃Ni nanoalloys as electrocatalysts for electrochemical nonenzymatic dopamine biosensors.