Palladium-Cobalt Nanotube Arrays Supported on Carbon Fiber Cloth as High-Performance Flexible Electrocatalysts for Ethanol Oxidation

Three-dimensional high-aspect-ratio microarray thick electrodes for high-rate hybrid supercapacitors

Hybrid supercapacitors (HSCs) with facile integration and high process compatibility are considered ideal power sources for portable consumer electronics. However, as a crucial component for storing energy, traditional thin-film electrodes exhibit low energy density. Although increasing the thickness of thin films can enhance the energy density of the electrodes, it gives rise to issues such as poor mechanical stability and long electron/ion transport pathways. Constructing a stable three-dimensional (3D) ordered thick electrode is considered the key to addressing the aforementioned contradictions. In this work, a manufacturing process combining lithography and chemical deposition techniques is developed to produce large-area and high-aspect-ratio 3D nickel ordered cylindrical array (NiOCA) current collectors. Positive electrodes loaded with nickel-cobalt bimetallic hydroxide (NiOCA/NiCo-LDH) are constructed by electrodeposition, and HSCs are assembled with NiOCA/nitrogen-doped porous carbon (NiOCA/NPC) as negative electrodes. The HSCs exhibits 55% capacity retention with the current density ranging from 2 to 50 mA cm-2. Moreover, it maintains 98.2% of the initial capacity after long-term cycling of 15,000 cycles at a current density of 10 mA cm-2. The manufacturing process demonstrates customizability and favorable repeatability. It is anticipated to provide innovative concepts for the large-scale production of 3D microarray thick electrodes for high-performance energy storage system.

Boosted Light Alkane Deep Oxidation via Metal Bond Length Modulation-Induced C-C Bond Preferential Activation

Light alkanes (LAs), typical VOCs existing in both stationary and mobile sources, pose significant environmental concerns. Although noble metal catalysts demonstrate strong C-H bond activation, their effectiveness in degrading LAs is hindered by inherent challenges, including poor chemical stability and water resistance. Here, from a new perspective, we propose a feasible strategy that adjusting the metal bond lengths within Pd clusters through partial substitution of smaller radius 3d transition metals (3dTMs) to prioritize the activation of low-energy C-C bonds within LAs. Benefiting from this, PdCo/CeO2 exhibits exceptional catalytic performance in propane degradation due to their high capacity for C-C cleavage stemming from the shorter Pd-Co length (2.51 Å) and lower coordination number (1.73), boosting the activation of α-H and β-H of propane simultaneously and accelerating the mobility of postactivated oxygen species to prevent Pd center deep oxidation. The presence of 3dTMs on Pd clusters improves the redox and charge transfer ability of catalysts, resulting in an amplified generation of oxygen vacancies and facilitating the adsorption and activation of reactants. Mechanistic studies and DFT calculations suggest that the substitution of 3dTMs significantly accelerate C-C bond cleavage within C3 intermediates to generate the subsequent C2 and C1 intermediates, suppressing the generation of harmful byproducts.

Electrodeposition-Assisted Crystal Growth Regulation of PdBi Clusters on Carbon Cloths for Ethanol Oxidation

Carbon-supported Pd-based clusters are one of the most promising anodic catalysts for ethanol oxidation reaction (EOR) due to their encouraging activity and practical applications. However, unclear growth mechanism of Pd-based clusters on the carbon-based materials has hindered their extensive applications. Herein, we first introduce multi-void spherical PdBi cluster/carbon cloth (PdBi/CC) composites by an electrodeposition routine. The growth mechanism of PdBi clusters on the CC supports has been systemically investigated by evaluating the selected samples and tuning their compositions, which involve the big difference in standard redox potential between Pd2+/Pd and Bi3+/Bi and easy adsorption of Bi3+ on the surface of Pd-rich seeds. Benefitting from the ensembles of many nanocrystal subunits, multi-void spherical PdBi clusters can present collective properties and novel functionalities. In addition, the outstanding characteristics of CC supports enable PdBi clusters with stable nanostructures. Thanks to the unique structure, Pd20Bi/CC catalysts manifest higher EOR activity and better stability compared to Pd/CC. Systematic characterizations and a series of CO poisoning tests further confirm that the dramatically enhanced EOR activity and stability can be attributed to the incorporation of Bi species and the strong coupling of the structure between PdBi clusters and CC supports.

Oxygen-Bridged Long-Range Dual Sites Boost Ethanol Electrooxidation by Facilitating C-C Bond Cleavage

Optimizing the interatomic distance of dual sites to realize C-C bond breaking of ethanol is critical for the commercialization of direct ethanol fuel cells. Herein, the concept of holding long-range dual sites is proposed to weaken the reaction barrier of C-C cleavage during the ethanol oxidation reaction (EOR). The obtained long-range Rh-O-Pt dual sites achieve a high current density of 7.43 mA/cm2 toward EOR, which is 13.3 times that of Pt/C, as well as remarkable stability. Electrochemical in situ Fourier transform infrared spectroscopy indicates that long-range Rh-O-Pt dual sites can increase the selectivity of C1 products and suppress the generation of a CO intermediate. Theoretical calculations further disclose that redistribution of the surface-localized electron around Rh-O-Pt can promote direct oxidation of -OH, accelerating C-C bond cleavage. This work provides a promising strategy for designing oxygen-bridged long-range dual sites to tune the activity and selectivity of complicated catalytic reactions.

Palladium metallene confined on MXene with increased hydroxyl binding strength for highly efficient ethanol electrooxidation

Rational design and synthesis of high-performance electrocatalysts for ethanol oxidation reaction (EOR) is crucial to large-scale commercialization of direct ethanol fuel cells, but it is still an incredible challenge. Herein, a unique Pd metallene/Ti3C2Tx MXene (Pdene/Ti3C2Tx)-supported electrocatalyst is constructed via an in-situ growth approach for high-efficiency EOR. The resulting Pdene/Ti3C2Tx catalyst achieves an ultrahigh mass activity of 7.47 A mgPd-1 under alkaline condition, as well as high tolerance to CO poisoning. In situ attenuated total reflection-infrared spectroscopy studies combined with density functional theory calculations reveal that the excellent EOR activity of Pdene/Ti3C2Tx catalyst is attributed to the unique and stable interfaces which reduce the reaction energy barrier of *CH3CO intermediate oxidation and facilitate oxidative removal of CO poisonous species by increasing the Pd-OH binding strength.

Sulfur and phosphorus co-doping optimized electronic structure and modulated intermediate affinity on PdSP metallene for ethanol-assisted energy-saving H2 production

Coupling cathodic hydrogen evolution reaction (HER) and anodic electrochemical oxidation of organic small molecules in a co-electrolysis system could simultaneously realize high-value chemical generation and energy-saving hydrogen production, which, however, require high-performance electrocatalysts. In this work, we developed a one-step solvothermal method to synthesize S, P-co-doped Pd metallene (PdSP metallene) and employed it as a bifunctional electrocatalyst for both the HER and ethanol oxidation reaction (EOR). The co-doping of S and P atoms into Pd metallene could introduce multiple active sites and increase the electrochemically-active surface area. Moreover, the electronic interactions between Pd, S, and P atoms could regulate the electronic structure of the active sites and modulate the intermediate affinity on the resultant PdSP metallene, thus boosting the electrocatalytic HER and EOR performance. In the HER-EOR co-electrolysis system with bifunctional PdSP metallene electrocatalysts, only a 0.88 V of electrolysis voltage was required to fulfill 10 mA cm^-2 current density, much lower than that of pure water electrolysis (1.41 V) using the same electrocatalysts.

Interface synergism and engineering of Pd/Co@N-C for direct ethanol fuel cells

Direct ethanol fuel cells have been widely investigated as nontoxic and low-corrosive energy conversion devices with high energy and power densities. It is still challenging to develop high-activity and durable catalysts for a complete ethanol oxidation reaction on the anode and accelerated oxygen reduction reaction on the cathode. The materials' physics and chemistry at the catalytic interface play a vital role in determining the overall performance of the catalysts. Herein, we propose a Pd/Co@N-C catalyst that can be used as a model system to study the synergism and engineering at the solid-solid interface. Particularly, the transformation of amorphous carbon to highly graphitic carbon promoted by cobalt nanoparticles helps achieve the spatial confinement effect, which prevents structural degradation of the catalysts. The strong catalyst-support and electronic effects at the interface between palladium and Co@N-C endow the electron-deficient state of palladium, which enhances the electron transfer and improved activity/durability. The Pd/Co@N-C delivers a maximum power density of 438 mW cm^-2 in direct ethanol fuel cells and can be operated stably for more than 1000 hours. This work presents a strategy for the ingenious catalyst structural design that will promote the development of fuel cells and other sustainable energy-related technologies.

Effect of different reduction methods on Pd/Al2O3 for o-xylene oxidation at low temperature

Pd/Al₂O₃ was pretreated by CO, H₂ and NaBH₄ reduction, respectively. The reduced catalysts were tested for o-xylene oxidation and characterized by power X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and temperature-programmed decomposition of palladium hydride (TPDH). The characterizations indicate the pretreatments lead to distinct Pd particle sizes and amount of surface activated oxygen species, which are responsible for the catalytic performance. Compared with H₂ and NaBH₄ reduction methods, CO reduction shows a strong interaction between Pd and Al₂O₃ with smaller Pd particle size and more surface activated oxygen. It exhibited excellent catalytic performance, complete oxidation of 50 ppmV o-xylene at 85°C with a WHSV of 60,000 mL/(g∙hr).

Black phosphorous/palladium functionalized carbon aerogel nanocomposite for highly efficient ethanol electrooxidation

Direct ethanol fuel cells have great potential for practical power applications due to their easy operation, high energy density, and low toxicity. However, the slow and incomplete ethanol electrooxidation (EEO) reaction is a major drawback that hinders the development of this type of fuel cell. Here, we report a facile approach for the preparation of highly active, low cost and stable electrocatalysts based on palladium (Pd) nanoparticles and black phosphorus/palladium (BP/Pd) nanohybrids supported on a carbon aerogel (CA). The nanocomposites show remarkable catalytic performance and stability as anode electrocatalysts for EEO in an alkaline medium. A mass peak current density of 8376 mA mg_Pd ^-1 is attained for EEO on the BP/Pd/CA catalyst, which is 11.4 times higher than that of the commercial Pd/C catalyst. To gain deep insight into the structure-property relationship associated with superior electroactivity, the catalysts are well characterized in terms of morphology, surface chemistry, and catalytic activity. It is found that the BP-doped CA support provides high catalyst dispersibility, protection against leaching, and modification of the electronic and catalytic properties of Pd, while the catalyst modifies CA into a more open and conductive structure. This synergistic interaction between the support and the catalyst improves the transport of active species and electrons at the electrode/electrolyte interface, leading to rapid EEO reaction kinetics.

Rhombohedral Pd-Sb Nanoplates with Pd-Terminated Surface: An Efficient Bifunctional Fuel-Cell Catalyst

Developing high-performance electrocatalysts for the ethanol oxidation reaction (EOR) and the oxygen reduction reaction (ORR) is essential for the commercialization of direct ethanol fuel cells, but it is still formidably challenging. In this work, a novel Pd-Sb hexagonal nanoplate for boosting both cathodic and anodic fuel cell reactions is prepared. Detailed characterizations reveal that the nanoplates have ordered rhombohedral phase of Pd₈ Sb₃ (denoted as Pd₈ Sb₃ HPs). The Pd₈ Sb₃ HPs exhibit much enhanced activity toward the oxidation of various alcohols. Particularly, Pd₈ Sb₃ HPs/C displays superior specific and mass activities of 29.3 mA cm^-2 and 4.5 A mg_Pd ^-1 toward the EOR, which are 7.0 and 11.3 times higher than those of commercial Pd/C, and 9.8 and 3.8 times higher than those of commercial Pt/C, respectively, representing one of the best EOR catalysts reported to date. In situ electrochemical attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) measurements reveal that Pd₈ Sb₃ HPs/C can effectively promote the C₂ pathway of the EOR. As revealed by density functional theory calculations, the high EOR activity of the Pd₈ Sb₃ HPs can be ascribed to the reduced energy barrier of ethanol dehydrogenation. Additionally, Pd₈ Sb₃ HPs/C also shows superior performance in the ORR. This work advances the controllable synthesis of the Pd-Sb nanostructure, giving huge impetus for the design of high-efficiency electrocatalysts for energy conversion and beyond.

Experimental and Theoretical Insights into Enhanced Hydrogen Evolution over PtCo Nanoalloys Anchored on a Nitrogen-Doped Carbon Matrix

The identification of synergistic effect of Pt-based alloys on hydrogen evolution reaction (HER) requires a combination of experimental studies and theoretical calculations. Here, we present the construction of uniform PtCo nanoparticles grown on N-doped carbon frameworks via pyrolyzing Pt and Co ions adsorbed polyaniline, whereby the nanostructure of the nanoalloys can be effectively tuned by controlling the calcination temperature. As-prepared PtCo@NC-900 shows the optimal HER performance in 0.5 M H2SO4, resulting in a high mass activity of 4.31 A mgPt-1 and excellent operation durability, which far exceeds that of commercial 20 wt % Pt/C (0.30 A mgPt-1). Density functional theory calculations further reveal that the improved HER activity on PtCo(111) is originated from the strong electronic interaction between Pt and Co with favorable electron transfer, allowing for a more suitable binding strength for hydrogen (i.e., ΔG*H = -0.164 eV) compared with that of pristine Pt(111) (-0.287 eV).

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Mesoporous PdBi nanocages for enhanced electrocatalytic performances by all-direction accessibility and steric site activation

An effective yet simple approach was developed to synthesize mesoporous PdBi nanocages for electrochemical applications. This technique relies on the subtle utilization of the hydrolysis of a metal salt to generate precipitate cores in situ as templates for navigating the growth of mesoporous shells with the assistance of polymeric micelles. The mesoporous PdBi nanocages are then obtained by excavating vulnerable cores and regulating the crystals of mesoporous metallic skeletons. The resultant mesoporous PdBi nanocages exhibited excellent electrocatalytic performance toward the ethanol oxidation reaction with a mass activity of 3.56 A mg-1_Pd, specific activity of 17.82 mA cm-2 and faradaic efficiency of up to 55.69% for C1 products.

A Convenient Procedure for Preparing BiOX-TiO2 Photoelectrocatalytic Electrodes from a Titanium-Oxo Compound-Modified Carbon Fiber Cloth

Photoelectrocatalysis (PEC) has shown great advantages in sustainable organic synthesis and wastewater treatment because the PEC process can minimize electron-hole recombination, thereby improving the photocatalytic performance. Here, we report a convenient procedure for preparing immobilized BiOX-TiO₂ photoelectrocatalytic electrodes from a titanium-oxo compound (TOC)-modified carbon fiber cloth (CFC). Crystalline TOCs composed of Ti₁₂ cations and bismuth halide anions, [Ti₁₂O₁₄(OⁱPr)₁₈][Bi₃Br₁₁(THF)₂] (1) and [Ti₁₂O₁₄(OⁱPr)₁₈][Bi₄I₁₄(THF)₂] (2), were grown on CFC. Taking advantage of the easy hydrolysis of the titanium-oxo cation and bismuth halide anion, we could easily transform these CFC-immobilized crystals into BiOX-TiO₂/CFC (X = Br or I) photocatalysts, which facilitates recycling of the catalysts. The photocatalytic dye degradation test showed that the efficiency did not decrease obviously after 10 photocatalytic cycles. Using BiOX-TiO₂-modified CFC as electrodes, electrocatalysis (EC), photocatalysis (PC), and PEC were examined. PEC showed an attractive synergistic effect of EC and PC. These TOC-modified CFCs would be potential candidates for catalytic electrodes for sustainable wastewater purification.

Enabling practical nanoparticle electrodeposition from aqueous nanodroplets

The rapid rise of technology in the modern world has led to an increased demand for energy. Consequently, it is essential to increase the efficiency of current energy-producing systems due to the poor activity of their catalysts. Nanoparticles play a significant role in energy storage and conversion; however, electrodeposition of nanoparticles is difficult to achieve due to surface heterogeneities, nanoparticle diffusion layer overlap, and the inability to electrodeposit multi-metallic nanoparticles with stoichiometric control. These problems can be solved through nanodroplet-mediated electrodeposition, a technique where water nanodroplets are filled with metal salt precursors that form stable nanoparticles when they collide with a negatively-biased electrode. Further, this method has demonstrated control over nanoparticle size and morphology, displaying a wide variety of applications for the generation of materials with excellent catalytic properties. Historically, the cost of nanodroplet-mediated electrodeposition experimentation is prohibitive because practitioners use 0.1 M to 0.5 M tetrabutylammonium perchlorate (TBAP) dissolved in the oil phase (∼10 mL). Such high concentrations of electrolytes have been used to lower ohmic drop and provide ions to maintain charge balance during electrodeposition. Here, we show that supporting electrolyte is not necessary for the oil phase. In fact, one can use a suitable salt (such as lithium perchlorate) in the aqueous phase to achieve nanoparticle electrodeposition. This simple change, grounded in an understanding of ion transfer, drives down the cost per experiment by nearly three orders of magnitude, representing a necessary step forward in enabling practical nanoparticle electrodeposition from water nanodroplets. This approach is a promising procedure for future cost-effective energy conversion systems relying on electrocatalytic nanoparticles.

Nickel-cobalt layered double hydroxide nanosheets anchored to the inner wall of wood carbon tracheids by nitrogen-doped atoms for high-performance supercapacitors

In this paper, a novel type of electrode material for high-performance hybrid supercapacitors is designed. The electrode mainly uses nitrogen-doped atoms to anchor the nickel-cobalt layered double hydroxide on the inner wall of wood-derived carbon tracheids from Chinese fir wood scraps. The specific capacity of the composite single electrode is 14.26 mAh cm^-2 at 10 mA cm^-2. The hybrid supercapacitor with a composite electrode cathode and nitrogen-doped wood-derived monolithic carbon materials as the anode has a high specific capacitance of 4.74F cm^-2 at 5 mA cm^-2, and the capacitance retention rate is 93.15% after 8000 charge-discharge cycles. The highest energy density and power density reach 1.48 mWh cm^-2 and 22.40 mW cm^-2, respectively. After doping with nitrogen, the combination with the nickel-cobalt layered double hydroxide is more uniform and stable, and the capacitance and cycling stability are significantly improved.

A novel composite anode via immobilizing of Ce-doped PbO2 on CoTiO3 for efficiently electrocatalytic degradation of dye

The exploitation of efficient electrocatalyst is significantly important for degradation of refractory organic pollutants. Herein, a novel Ti/CoTiO₃/Ce-PbO₂ composite electrocatalyst (abbreviated as CTO/CP) is successfully constructed via facile consecutive immersion pyrolysis and electro-deposition method and then systematically characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FT-IR), energy dispersive spectroscopy (EDS) and near infrared chemical imaging (NIR-CI). Importantly, the electrochemical measurements demonstrate that the CTO/CP possesses numerous prominent properties such as lower charge transfer resistance, larger electroactive area, higher oxygen evolution potential than those of the pristine Ti/CoTiO₃ (CTO) and Ti/Ce-PbO₂ (CP). Thereby, the CTO/CP exhibits an enhanced electrocatalytic degradation performance with the degradation efficiency as high as 90.0% and COD removal rate of 88.3% at 180 min for the optimal CTO/CP (denoted as 10 layers of CTO and 1 h electrodeposition of CP), in which the ·OH is the major reactive species. Additionally, the optimal CTO/CP also shows a higher ICE/ACE together with lower EEC and desirable stability, universal applicability for many different dyes and reusability. Overall, this work offers a promising approach for enhancing the electrocatalytic properties of CTO via introducing CP.

Ultrafine PdCo bimetallic nanoclusters confined in N-doped porous carbon for the efficient semi-hydrogenation of alkynes

Ultrafine PdCo bimetallic nanoclusters with Co atom-modified Pd active sites were highly dispersed and confined in an m-NC material for selective semi-hydrogenation of alkynes to alkenes.

Alloyed Palladium-Lead Nanosheet Assemblies for Electrocatalytic Ethanol Oxidation

Synthesizing alloyed bimetallic electrocatalysts with a three-dimensional (3D) structure assembly have arouse great interests in electrocatalysis. We synthesized a class of alloyed Pd₃Pb/Pd nanosheet assemblies (NSAs) composed of a two-dimensional (2D) sheet structure with adjustable compositions via an oil bath approach at a low temperature. Both the scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images reveal the successful formation of the nanosheet structure, where the morphology of Pd₃Pb/Pd NSAs can be regulated by adjusting the atomic mole ratio of Pb and Pb metal precursors. The power X-ray diffraction (XRD) pattern shows that Pd₃Pb/Pd NSA catalysts are homogeneously alloyed. Electrochemical analysis and the density functional theory (DFT) method demonstrate that the electrocatalytic activity of the alloyed Pd₃Pb/Pd NSAs can be improved by the doping of the Pb element. As a result of the addition of element Pb and change of the electron structure, the electrocatalytic activity toward ethanol oxidation of alloyed Pd₃Pb/Pd-15 NSA can reach up to 2886 mA mg^-1, which is approximately 2.8 times that of the pure Pd NSA counterpart (1020 mA mg^-1). The Pd₃Pb/Pd NSAs are favorable in a high catalytic temperature, high KOH concentration, and high ethanol concentration.

Strain effect in Pd@PdAg twinned nanocrystals towards ethanol oxidation electrocatalysis

The strain effect is a critical knob to tune the catalytic performance and has received unprecedented research interest recently. However, it is difficult to distinguish the strain effect from the synergistic effect, especially in alloyed catalysts. Here we have synthesized Pd@PdAg icosahedra and {111} truncated bi-pyramids with only different surface strains between them as electrocatalysts for the ethanol oxidation reaction (EOR). Due to the same exposed facets and compositions of the two electrocatalysts, their EOR performances are mainly determined by the surface strains of PdAg alloys. These two electrocatalysts provide a perfect model to investigate the role of the strain effect in tuning the EOR performance. It is indicated that Pd@PdAg {111} truncated bi-pyramids with a surface strain of 0.3% show better catalytic activity and durability than Pd@PdAg icosahedra with a surface strain of 2.1% including commercial Pd/C. Density functional theory (DFT) calculations reveal that the lowered d-band center of 0.3% strained PdAg alloys relative to 2.1% strained ones reduced the adsorption energy of the acetate-evolution key intermediate *CH₃CO, thereby promoting the enhancement in the catalytic performance of Pd@PdAg nanocrystals for the EOR. Electrochemical analysis further verifies this demonstration on the key role of the strain effect in PdAg alloys for tuning catalytic performance.

Covalent Organic Framework (COF)-Based Hybrids for Electrocatalysis: Recent Advances and Perspectives

Developing highly efficient electrocatalysts for renewable energy conversion and environment purification has long been a research priority in the past 15 years. Covalent organic frameworks (COFs) have emerged as a burgeoning family of organic materials internally connected by covalent bonds and have been explored as promising candidates in electrocatalysis. The reticular geometry of COFs can provide an excellent platform for precise incorporation of the active sites in the framework, and the fine-tuning hierarchical porous architectures can enable efficient accessibility of the active sites and mass transportation. Considerable advances are made in rational design and controllable fabrication of COF-based organic-inorganic hybrids, that containing organic frameworks and inorganic electroactive species to induce novel physicochemical properties, and take advantage of the synergistic effect for targeted electrocatalysis with the hybrid system. Branches of COF-based hybrids containing a diversity form of metals, metal compounds, as well as metal-free carbons have come to the fore as highly promising electrocatalysts. This review aims to provide a systematic and profound understanding of the design principles behind the COF-based hybrids for electrocatalysis applications. Particularly, the structure-activity relationship and the synergistic effects in the COF-based hybrid systems are discussed to shed some light on the future design of next-generation electrocatalysts.

In situ self-assembled N-rich carbon on pristine graphene as a highly effective support and cocatalyst of short Pt nanoparticle chains for superior electrocatalytic activity toward methanol oxidation

Highly conductive cocatalysts with great promotion effects are critical for the development of pristine graphene supported Pt-based catalysts for the methanol oxidation reaction (MOR) in direct methanol fuel cells (DMFCs). However, identification of these cocatalysts and controlled fabrication of Pt/cocatalyst/graphene hybrids with superior catalytic performance present great challenges. For the first time, pristine graphene supported N-rich carbon (NC) has been controllably fabricated via ionic-liquid-based in situ self-assembly for in situ growth of small and uniformly dispersed Pt NP chains to improve the MOR catalytic activity. It is discovered that the NC serves simultaneously as a linker to facilitate in situ nucleation of Pt, a stabilizer to restrict its growth and aggregation, and a structure-directing agent to induce the formation of Pt NP chains. The obtained nanohybrid shows a much higher forward peak current density than commercial Pt/C and most reported noncovalently functionalized carbon (NFC) supported Pt catalysts, a lower onset potential than almost all commercial Pt/C and NFC supported Pt, and greatly enhanced durability compared to graphene supported Pt NPs and commercial Pt/C. The superior catalytic performance is ascribed to the uniformly dispersed, small-diameter, and short Pt NP chains supported on highly conductive G@NC providing high ECSA and improved CO tolerance and the NC with high content of graphitic N greatly enhancing the intrinsic activity and CO tolerance of Pt and offering numerous binding sites for robustly attaching Pt. This work not only identifies and controllably fabricates a novel cocatalyst to significantly promote the catalytic activity of pristine graphene supported Pt but provides a facile and economical strategy for the controlled synthesis of high-performance integrated catalysts for the MOR in DMFCs.

Surface-Adsorbed Carboxylate Ligands on Layered Double Hydroxides/Metal-Organic Frameworks Promote the Electrocatalytic Oxygen Evolution Reaction

Metal-organic frameworks (MOFs) with carboxylate ligands as co-catalysts are very efficient for the oxygen evolution reaction (OER). However, the role of local adsorbed carboxylate ligands around the in-situ-transformed metal (oxy)hydroxides during OER is often overlooked. We reveal the extraordinary role and mechanism of surface-adsorbed carboxylate ligands on bi/trimetallic layered double hydroxides (LDHs)/MOFs for OER electrocatalytic activity enhancement. The results of X-ray photoelectron spectroscopy (XPS), synchrotron X-ray absorption spectroscopy, and density functional theory (DFT) calculations show that the carboxylic groups around metal (oxy)hydroxides can efficiently induce interfacial electron redistribution, facilitate an abundant high-valence state of nickel species with a partially distorted octahedral structure, and optimize the d-band center together with the beneficial Gibbs free energy of the intermediate. Furthermore, the results of in situ Raman and FTIR spectra reveal that the surface-adsorbed carboxylate ligands as Lewis base can promote sluggish OER kinetics by accelerating proton transfer and facilitating adsorption, activation, and dissociation of hydroxyl ions (OH^- ).

Ordered PdCu-Based Core-Shell Concave Nanocubes Enclosed by High-Index Facets for Ethanol Electrooxidation

Crystal phase engineering is a powerful strategy for regulating the performance of electrocatalysts toward many electrocatalytic reactions. Herein we demonstrate that Au@Pd₁Cu concave nanocubes (CNCs) with an ordered body-centered cubic (bcc) PdCu alloy shell enclosed by many high active high-index facets can be adopted as highly active yet stable electrocatalysts for the ethanol oxidation reaction (EOR). These CNCs are more efficient than other nanocrystals with a disordered face-centered cubic (fcc) PdCu alloy surface and display high mass and specific activities of 10.59 A mg_pd^-1 and 33.24 mA cm^-2, which are 11.7 times and 4.1 times higher than those of commercial Pd black, respectively. Our core-shell CNCs also exhibit robust durability with the weakest decay in activity after 250 potential-scanning cycles, as well as outstanding antipoisoning ability. Alloying with Cu and the ordered bcc phase surface can provide abundant OH_ads species to oxidize carbonaceous poison to avoid catalyst poisoning, and the exposed high-index facets on the surface can act as highly catalytic sites.

Palladium cobalt alloy encapsulated in carbon nanofibers as bifunctional electrocatalyst for high-efficiency overall hydrazine splitting

Electrolytic water splitting is a promising strategy to generate clean hydrogen energy but still restricted by the sluggish kinetics during the anodic oxygen evolution reaction (OER). A highly efficient route to significantlyreduce the cell voltage of electrolytic water splitting is to replace OER with hydrazine oxidation reaction (HzOR) so as to assist hydrogen generation effectively. Here, we report the fabrication of carbon nanofibers (CNFs) embedded with palladium cobalt (PdCo) alloy nanoparticles, via an electrospinning followed by a carbonization treatment. The as-synthesized PdCo-CNFs catalyst displays a superior electrocatalytic activity toward HzOR with a working potential of 258 mV (vs. RHE) to drive a current density of 50 mA cm^-2 in an alkaline solution with 0.2 M hydrazine. Furthermore, the favorable hydrogen evolution reaction (HER) activity of this catalyst enables it highly efficient electrolytic hydrogen production, and the two-electrode system using PdCo-CNFs as both the cathode and anode for overall hydrazine splitting is capable of delivering a cell voltage of 0.440 V to attain 10 mA cm^-2, which is 1.496 V less than that for pure water splitting using the same electrodes and even 0.459 V less than the overall hydrazine splitting device using Pt/C//RuO₂ as electrocatalysts. This work provides a reliable way for the fabrication of promising bifunctional electrocatalysts to promote energy-saving hydrogen production for practical applications.

Microstructure and Properties of Ag-Doped ZnO Grown Hydrothermally on a Graphene-Coated Polyethylene Terephthalate Bilayer Flexible Substrate

Ag-doped ZnO nanorods growth on a PET-graphene substrate (Ag-ZnO/PET-GR) with different Ag-doped content were synthesized by low-temperature ion-sputtering-assisted hydrothermal synthesis method. The phase composition, morphologies of ZnO, and electrical properties were analyzed. Ag-doping affects the initially perpendicular growth of ZnO nanorods, resulting in oblique growth of ZnO nanorods becoming more obvious as the Ag-doped content increases, and the diameter of the nanorods decreasing gradually. The width of the forbidden band gap of the ZnO films decreases with increasing Ag-doped content. For the Ag-ZnO/PET-GR composite structure, the Ag-ZnO thin film with 5% Ag-doped content has the largest carrier concentration (8.1 × 10¹⁸ cm⁻³), the highest mobility (67 cm² · V⁻¹ · s⁻¹), a small resistivity (0.09 Ω·cm), and impressive electrical properties.

A comprehensive and critical review of the recent progress in electrocatalysts for the ethanol oxidation reaction

The human craving for energy is continually mounting and becoming progressively difficult to gratify. At present, the world's massive energy demands are chiefly encountered by nonrenewable and benign fossil fuels. However, the development of dynamic energy cradles for a gradually thriving world to lessen fossil fuel reserve depletion and environmental concerns is currently a persistent issue for society. The discovery of copious nonconventional resources to fill the gap between energy requirements and supply is the extreme obligation of the modern era. A new emergent, clean, and robust alternative to fossil fuels is the fuel cell. Among the different types of fuel cells, the direct ethanol fuel cell (DEFCs) is an outstanding option for light-duty vehicles and portable devices. A critical tactic for obtaining sustainable energy sources is the production of highly proficient, economical and green catalysts for energy storage and conversion devices. To date, a broad range of research is available for using Pt and modified Pt-based electrocatalysts to augment the C₂H₅OH oxidation process. Pt-based nanocubes, nanorods, nanoflowers, and the hybrids of Pt with metal oxides such as Fe₂O₃, TiO₂, SnO₂, MnO, Cu₂O, and ZnO, and with conducting polymers are extensively utilized in both acidic and basic media. Moreover, Pd-based materials, transition metal-based materials, as well as transition metal-based materials are also points of interest for researchers nowadays. This review article delivers a broad vision of the current progress of the EOR process concerning noble metals and transition metals-based materials.

Ultrathin and Wavy PdB Alloy Nanowires with Controlled Surface Defects for Enhanced Ethanol Oxidation Electrocatalysis

Engineering crystalline structures/defects and elemental compositions is synthetically critical to optimize surface features of noble metal nanocrystals and thus improve their catalytic performances in various reactions. In this manuscript, we report a facile one-step aqueous synthesis of one-dimensional (1D) noble metal-metalloid alloy nanowires (NWs) with an ultrathin and wavy morphology, controlled crystalline defects, and binary PdB compositions as a highly efficient catalyst toward the electrochemical ethanol oxidation reaction (EOR). We show that the utilization of hexadecylpyridinium chloride as functional surfactant is of great importance to confine in-the-columnar epitaxial nucleation of anisotropic ultrathin PdB NWs, while the attachment growth precisely controls their surface crystalline defects with a wavy morphology. Meanwhile, this strategy is synthetically universal and can be readily extended to engineer an ultrathin wavy morphology and crystalline defect of ternary PdMB (M = Cu and Pt) alloy NWs. Owing to multiple structural and compositional merits, resultant PdB alloy NWs synergistically expose more electrocatalytically active sites and also kinetically accelerate the removal of CO-related poisons, remarkably improving electrocatalytic EOR activity and stability compared to their counterpart catalysts. Besides, wavy PdB alloy NWs are also electrochemically more active for electrocatalytic oxidation of other alcohols (methanol, glycerol, and glucose). The findings reported here thus shed a bright light on rational design of the high-performance metal alloy catalysts for their potential applications in fine chemical synthesis, fuel cells, and beyond.

Hollow Pd/Te nanorods for the effective electrooxidation of methanol

Methanol electrooxidation is significant in realizing effective C1 liquid fuel applications. Herein, hollow Pd/Te nanorods were fabricated and evaluated for methanol oxidation, and they were found to exhibit high catalytic efficiency for methanol oxidation in alkaline electrolyte compared to Pd or Pd/C catalysts. The hybrid structure of hexagonal crystal Te and face-centered cubic Pd was formed by microwave assisted Pd nanoparticle deposition over the surface of Te nanorods. Strong electronic effects and facile oxophilic properties were indicated in the Pd/Te system by spectroscopic analysis, which mainly accounts for the high catalytic performance for methanol oxidation. Specifically, they showed a peak current density of 90.1 mA cm^-2 for methanol oxidation, around 3.5 times higher than that of commercial Pd/C (26.3 mA cm^-2). High catalytic stability was also observed for Pd/Te, with a current retention of 64.3% after 3600 s of chronoamperometric testing, much higher than for Pd catalysts (20.1%). High anti-CO poisoning ability of the Pd/Te catalyst was demonstrated in the CO-stripping voltammetry results, and faster catalytic kinetics were also observed for this catalyst system. The electron-rich state of Pd and high active site exposure are responsible for the high performance of the Pd/Te catalyst in methanol oxidation.

Synergistic influence of mesoporous spinel nickel ferrite on the electrocatalytic activity of nano-structured palladium

Structure and surface area are critical factors for catalysts in fuel cells. Hence, a spinel nickel ferrite mesoporous (SNFM) is prepared via the solution combustion technique, an efficient and one-step synthesis. Dynamic X-ray analysis has clarified the structural properties of SNFM. The grain size of SNFM is determined to be ∼11.6 nm. The specific surface area (87.69 m2. g-1) of SNFM is obtained via the Brunauer-Emmett-Teller method. The Barrett-Joyner-Halenda pore size distributions revealed that the size of the mesopores in as-synthesized SNFM mainly falls in the size range of 2-16 nm. Scanning electron microscopy studies showed the regularities involved during porous-structure formation. SNFM is employed as the support for nano-structured palladium (PdNS). Field emission scanning electron microscope studies of PdNS-SNFM showed the deposition of PdNS in cavities and on/in the pores of SNFM. The electrochemical surface area obtained for PdNS-SNFM is about 27 times larger than that of PdNS via cyclic voltammetry. The electrochemical studies are utilized to study the features and catalytic performance of PdNS-SNFM in the electro-oxidation of diverse small organic fuels, whereas the electrooxidation of diethylene glycol is reported for first-time.

Coffee ground derived biochar embedded Ov-NiCoO2 nanoparticles for efficiently catalyzing a boron‑hydrogen bond break

The catalytic boron‑hydrogen bond break is usually regarded as an important reaction both in the area of environment treatment and hydrogen energy, attracting increasing attention in the past decades. Due to the limitation of conventional noble metal-based catalyst, cost-effective transition metal-based catalysts with high activity have been recently developed to become the promising candidates. Herein, the coffee ground waste was utilized as the biochar substrate loaded with ultrafine NiCoO₂ nanoparticles. The abundant function groups on the biochar substrate efficiently adsorbed the metal ions and confined the crystal growth spatially, making the NiCoO₂ nanoparticles highly dispersed on the surface. Moreover, the oxygen vacancies were further created in the catalysts by a vacuum-calcination strategy to boost their catalytic activity towards boron‑hydrogen bond break both in the systems of 4-nitrophenol reduction by NaBH₄ and hydrogen release from NH₃BH₃. The results indicated that the moderate presence of oxygen vacancies could effectively accelerate the boron‑hydrogen bond break and the catalytic activity performed a satisfied stability during several recycles. The theoretical calculation method was adopted to analysis and discuss the mechanism within this process. This design strategy on active catalysts not only offered a novel solution of biowaste resource reuse but also demonstrated the significant role of oxygen vacancies in energy and environmental catalysis.

Surfactant-Assisted Synthesis of Palladium Nanosheets and Nanochains for the Electrooxidation of Ethanol

The synthesis of metal nanometer electrocatalysts with a two-dimensional (2D) structure or rich active sites has become a research hotspot in electrocatalysis. In this work, surfactant hexadecyltrimethylammonium bromide (CTAB) was used to assist the synthesis and assembly of Pd ultrathin nanosheet with the help of Mo(CO)₆ in the start system. Pd nanochain composed of nanoparticles is obtained under the same condition, replacing CTAB with carrageenan only. Electrochemical measurements showed that the catalytic peak current density for the electrooxidation of ethanol can reach 2145 mA mg^-1 for the Pd nanosheet assembly (NSA) and 1696 mA mg^-1 for Pd nanochains. Pd nanosheet assembly also has a lower electron-transfer barrier, better catalytic stability, and antipoisoning performance than that of Pd nanochains. The mechanism of Pd nanosheets and nanochains catalysts the enhanced electrocatalytic activity toward ethanol oxidation has been discussed based on the experimental data.

Selective Ethanol Oxidation Reaction at the Rh-SnO2 Interface

Direct ethanol fuel cells (DEFCs) are regarded as an attractive power source with high energy density, bio-renewability, and convenient storage and transportation. However, the anodic reaction of DEFCs, that is, the ethanol oxidation reaction (EOR), suffers from poor efficiency due to the low selectivity to CO₂ (C1 pathway) and high selectivity to CH₃ COOH (C2 pathway). In this study, the selective EOR to CO₂ can be achieved at the Rh-SnO₂ interface in SnO₂ -Rh nanosheets (NSs). The optimized catalyst of 0.2SnO₂ -Rh NSs/C exhibits excellent alkaline EOR performance with a mass activity of 213.2 mA mg_Rh ^-1 and a Faraday efficiency of 72.8% for the C1 pathway, which are 1.7 and 1.9 times higher than those of Rh NSs/C. Mechanism studies indicate that the strong synergy at the Rh-SnO₂ interface significantly promotes the breaking of CC bond of C₂ H₅ OH to form CO₂ , and facilitates oxidation of the poisonous intermediates (^* CO and ^* CH₃ ) to suppress the deactivation of the catalyst. This work not only provides a highly selective, active, and stable catalyst for the EOR, but also promotes fundamental research for the design of efficient catalysts via interface modification.

Hierarchical porous Ni, Fe-codoped Co-hydroxide arrays derived from metal–organic-frameworks for enhanced oxygen evolution

The multi metal organic frameworks can be successfully transformed into hierarchical porous Ni,Fe-codoped Co-hydroxide nanowire array catalysts with excellent electrocatalytic performance for the OER in alkaline media.

Thermal Profiles of Carbon Fiber Based Anisotropic Thin-Films: An Emerging Heat Management Solution for High-Current Flow Electrocatalysis and Electrochemical Applications

Carbon fiber has been extensively used in the photocatalysis, electrocatalysis and energy storage fields as supporting platform and conductive media. However, less attention has been paid with regards to its function in phonon transport and thermal management. We have investigated the effect of current flow direction on the heat management performance of carbon fiber based thin film heaters (CFTFHs) with anisotropic percolation network of carbon fibers (CFs). The anisotropic percolation network of carbon fibers (CFs) formed by roll-to-roll spray coating leads to the anisotropic electrical properties of CFs. As a result, CFs based thin films (CFTFs) have lower sheet resistance when measured parallel to the CFs alignment, compared to when they are aligned perpendicular. Because connectivity and current flow in CFs are critically dependent on the direction alignment of CFs, the saturation temperature (106.4 °C) of CFTFH with parallel aligned carbon fiber is higher than that (117.3 °C) of CFTFH with perpendicular alignment. Therefore, current flow in the same direction as the alignment of CFs is very important to achieve high-performance. Moreover, our study on thermal profile of anisotropic CFTFs under high current flows illustrates that carbon fiber thin films have great potential in thermal management solution for electrocatalytic and electrochemical energy storage applications.

Skin-Like Stretchable Fuel Cell Based on Gold-Nanowire-Impregnated Porous Polymer Scaffolds

Skin-like energy devices can be conformally attached to the human body, which are highly desirable to power soft wearable electronics in the future. Here, a skin-like stretchable fuel cell based on ultrathin gold nanowires (AuNWs) and polymerized high internal phase emulsions (polyHIPEs) scaffolds is demonstrated. The polyHIPEs can offer a high porosity of 80% yet with an overall thickness comparable to human skin. Upon impregnation with electronic inks containing ultrathin (2 nm in diameter) and ultrahigh aspect-ratio (>10 000) gold nanowires, skin-like strain-insensitive stretchable electrodes are successfully fabricated. With such designed strain-insensitive electrodes, a stretchable fuel cell is fabricated by using AuNWs@polyHIPEs, platinum (Pt)-modified AuNWs@polyHIPEs, and ethanol as the anode, cathode, and fuel, respectively. The resulting epidermal fuel cell can be patterned and transferred onto skin as "tattoos" yet can offer a high power density of 280 µW cm^-2 and a high durability (>90% performance retention under stretching, compression, and twisting). The results presented here demonstrate that this skin-thin, porous, yet stretchable electrode is essentially multifunctional, simultaneously serving as a current collector, an electrocatalyst, and a fuel host, indicating potential applications to power future soft wearable 2.0 electronics for remote healthcare and soft robotics.

Preparation of Carbon-Supported Ternary Nanocatalysts Palladium-Vanadium-Cobalt for Alcohol Electrooxidation

Carbon-supported nanocatalysts palladium-vanadium-cobalt (PdVCo) were synthesized via ethylene glycol (EG) reduction reaction and NaBH4-assisted reduction. The electrocatalytic performance for alcohol oxidation in alkaline solutions was investigated. The XRD and EDX results confirmed the incorporation of V and Co with Pd lattice to form the ternary nanocatalysts PdVCo in a single phase. The NaBH4-assisted EG reduction process exhibited highly dispersed nanoparticles with a uniform size, and the electrochemical surface area (ECSA) determined by cyclic voltammetry in 1 M KOH was also superior. In electrocatalysis performance, the cyclic voltammetry (CV) and chronoamperometry (CA) results presented an excellent electrocatalytic activity and stability of the PdVCo-20EG-20NaBH4 sample in the alcohol electrooxidation as compared to other synthesized samples with the steady current of 52 mA/cm2 and 21.9 mA/cm2 in methanol and ethanol, respectively.

Unveiling Synergistic Effects of Interstitial Boron in Palladium-Based Nanocatalysts for Ethanol Oxidation Electrocatalysis

Alloying is one of the most promising routes for tuning the physicochemical properties of noble metal-based nanocatalysts and thus improving their (electro)catalytic performance. Despites numerous achievements, bimetallic and trimetallic nanoalloys have still been thoroughly studied for the past two decades. In this study, metalloid boron (B) was alloyed within palladium (Pd)-based nanocatalysts to promote the electrochemical ethanol oxidation reaction (EOR) in alkaline media. The optimum PdCuB nanocatalyst exhibited remarkable electrochemical EOR activity (5.83 A mg_Pd^-1) and good operation stability (both cycling and chronoamperometric studies). Mechanistic studies in both pure KOH and a KOH/ethanol mixture attributed superior EOR performance to positive synergistic effects of B in Pd-based nanocatalysts that kinetically accelerated the removal of poisoning ethoxy intermediates (the rate-determining step of EOR). They included (i) an electronic effect that changed the electronic structure of Pd and thus weakened the adsorption of poisoning ethoxy intermediates, (ii) a bifunctional effect that facilitated the adsorption of OH_ads and thus kinetically accelerated the further oxidation of poisoning intermediates, and (iii) a structural effect in which smaller B interstitially inserted into Pd-based nanocrystals and thus suppressed the physical Ostwald ripening processes.

CoP/RGO-Pd Hybrids with Heterointerfaces as Highly Active Catalysts for Ethanol Electrooxidation

The ethanol oxidation reaction is of critical importance to the commercial viability of direct ethanol fuel cell technology. However, owing to the poor C-C bond cleavage capability, almost all ethanol oxidation is incomplete and suffers from low selectivity toward the C1 pathway. Herein, under the support of theoretical calculations that the heterointerfaces between CoP and Pd can reduce the energy barrier of C-C bond cleavage, rich heterointerfaces in CoP/RGO-Pd hybrids were designed to improve ethanol electrooxidation performance through enhancing the selectivity toward the C1 pathway. The experimental results show that the faradaic efficiency of the C1 pathway of CoP/RGO-Pd hybrids is as high as 27.6%, surpassing most reported catalysts in the literature. As a result of this enhancement, CoP/RGO-Pd10 exhibits mass activity as high as 4597 mA·mg_Pd^-1 and specific activity as high as 10 mA·cm^-2, which are much higher than those of other Pd-based electrocatalysts.