Affinity screening using competitive binding with fluorine-19 hyperpolarized ligands

Cross-Polarization of Insensitive Nuclei from Water Protons for Detection of Protein-Ligand Binding

Hyperpolarization derived from water protons enhances the NMR signal of 15N nuclei in a small molecule, enabling the sensitive detection of a protein-ligand interaction. The water hyperpolarized by dissolution dynamic nuclear polarization (D-DNP) acts as a universal signal enhancement agent. The 15N signal of benzamidine was increased by 1480-fold through continuous polarization transfer by J-coupling-mediated cross-polarization (J-CP) via the exchangeable protons. The signal enhancement factor favorably compares to factors of 110- or 17-fold using non-CP-based polarization transfer mechanisms. The hyperpolarization enabled detection of the binding of benzamidine to the target protein trypsin with a single-scan measurement of 15N R2 relaxation. J-CP provides an efficient polarization mechanism for 15N or other low-frequency nuclei near an exchangeable proton. The hyperpolarization transfer sustained within the relaxation time limit of water protons additionally can be applied for the study of macromolecular structure and biological processes.

Accelerated Screening of Protein-Ligand Interactions via Parallel T2-Weighted 19F-MRI

In drug discovery, ligands are sought that modulate the (mal-)function of medicinally relevant target proteins. In order to develop new drugs, typically a multitude of potential ligands are initially screened for binding and subsequently characterized for their affinity. Nuclear magnetic resonance (NMR) is a well-established and highly sensitive technology for characterizing such interactions. However, it has limited throughput, because only one sample can be measured at a time. In contrast, magnetic resonance imaging (MRI) is inherently parallel and MR parameters can conveniently be encoded in its images, potentially offering increased sample throughput. We explore this application using a custom-built 9-fold sample holder and a 19F-MRI coil. With this setup, we show that ligand binding can be detected by T2-weighted 19F-MRI using 4-(trifluoromethyl)benzamidine (TFBA) and trypsin as the reporter ligand and target protein, respectively. Furthermore, we demonstrate that the affinity of nonfluorinated ligands can be determined in a competition format by monitoring the dose-dependent displacement of TFBA. By comparing 19F-T2-weighted MR images of TFBA in the presence of different benzamidine (BA) concentrations-all recorded in parallel-the affinity of BA could be derived. Therefore, this approach promises parallel characterization of protein-ligand interactions and increased throughput of biochemical assays, with potential for increased sensitivity when combined with hyperpolarization techniques.

Measuring Protein-Ligand Binding by Hyperpolarized Ultrafast NMR

Protein-ligand interactions can be detected by observing changes in the transverse relaxation rates of the ligand upon binding. The ultrafast NMR technique, which correlates the chemical shift with the transverse relaxation rate, allows for the simultaneous acquisition of R2 for carbon spins at different positions. In combination with dissolution dynamic nuclear polarization (D-DNP), where the signal intensity is enhanced by thousands of times, the R2 values of several carbon signals from unlabeled benzylamine are observable within a single scan. The hyperpolarized ultrafast chemical shift-R2 correlated experiment separates chemical shift encoding from the readout phase in the NMR pulse sequence, which allows it to beat the fundamental limit on the spectral resolution otherwise imposed by the sampling theorem. Applications enabled by the ability to measure multiple relaxation rates in a single scan include the study of structural properties of protein-ligand interactions.

Rapid and Simple 13C-Hyperpolarization by 1H Dissolution Dynamic Nuclear Polarization Followed by an Inline Magnetic Field Inversion

Dissolution dynamic nuclear polarization (dDNP) is a method of choice for preparing hyperpolarized 13C metabolites such as 1-13C-pyruvate used for in vivo applications, including the real-time monitoring of cancer cell metabolism in human patients. The approach consists of transferring the high polarization of electron spins to nuclear spins via microwave irradiation at low temperatures (1.0-1.5 K) and moderate magnetic fields (3.3-7 T). The solid sample is then dissolved and transferred to an NMR spectrometer or MRI scanner for detection in the liquid state. Common dDNP protocols use direct hyperpolarization of 13C spins reaching polarizations of >50% in ∼1-2 h. Alternatively, 1H spins are polarized before transferring their polarization to 13C spins using cross-polarization, reaching polarization levels similar to those of direct DNP in only ∼20 min. However, it relies on more complex instrumentation, requiring highly skilled personnel. Here, we explore an alternative route using 1H dDNP followed by inline adiabatic magnetic field inversion in the liquid state during the transfer. 1H polarizations of >70% in the solid state are obtained in ∼5-10 min. As the hyperpolarized sample travels from the dDNP polarizer to the NMR spectrometer, it goes through a field inversion chamber, which causes the 1H → 13C polarization transfer. This transfer is made possible by the J-coupling between the heteronuclei, which mixes the Zeeman states at zero-field and causes an antilevel crossing. We report liquid-state 13C polarization up to ∼17% for 3-13C-pyruvate and 13C-formate. The instrumentation needed to perform this experiment in addition to a conventional dDNP polarizer is simple and readily assembled.

R2 Relaxometry of SABRE-Hyperpolarized Substrates at a Low Magnetic Field

Nuclear magnetic resonance (NMR) relaxometry at a low magnetic field, in the milli-Tesla range or less, is enabled by signal enhancements through hyperpolarization. The parahydrogen-based method of signal amplification by reversible exchange (SABRE) provides large signals in a dilute liquid for the measurement of R2 relaxation using a single-scan Carr-Purcell-Meiboom-Gill (CPMG) experiment. A comparison of relaxation rates obtained at high and low fields indicates that an otherwise dominant contribution from chemical exchange is excluded in this low-field range. The SABRE process itself is based on exchange between the free and polarization transfer catalyst-bound forms of the substrate. At a high magnetic field of 9.4 T, typical conditions for producing hyperpolarization including 5 mM 5-fluoropyridine-3-carboximidamide as a substrate and 0.5 mM chloro(1,5-cyclooctadiene)[4,5-dimethyl-1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene]iridium(I) as a polarization transfer catalyst precursor resulted in an R2 relaxation rate as high as 3.38 s-1. This relaxation was reduced to 1.19 s-1 at 0.85 mT. A quantitative analysis of relaxation rates and line shapes indicates that milli-Tesla or lower magnetic fields are required to eliminate the exchange contribution. At this magnetic field strength, R2 relaxation rates are indicative primarily of molecular properties. R2 relaxometry may be used for investigating molecular interactions and dynamics. The SABRE hyperpolarization, which provides signal enhancements without requiring a high magnetic field or large instrumentation, is ideally suited to enable these applications.

Biomolecular interactions studied by low-field NMR using SABRE hyperpolarization

We demonstrate that low-field nuclear magnetic resonance provides a means for measuring biomacromolecular interactions without requiring a superconducting, or even a permanent magnet. A small molecule, 5-fluoropyridine-3-carboximidamide, is designed to be a specific ligand for the trypsin protein, while containing a fluorine atom as a nuclear spin hyperpolarizable label. With hyperpolarization by the parahydrogen based signal amplification by the reversible exchange method, fluorine NMR signals are detectable in the measurement field of 0.85 mT of an electromagnet, at a concentration of less than 100 μM. As a weak ligand for the protein, the hyperpolarized molecule can serve as a reporter for measuring the binding of other ligands of interest, illustrated by the determination of the dissociation constant KD of benzamidine from changes in the observed R2 relaxation rates. A signal enhancement of more than 106 compared to Boltzmann polarization at the measurement field indicates that this experiment is not feasible without prepolarization. The extended magnetic field range for the measurement of biomolecular interactions under near physiological conditions, with a protein concentration on the order of 10 μM or less, provides a new option for screening of ligand binding, measurement of protein-protein interactions, and measurement of molecular dynamics.

Competitive Displacement Restores the Hyperpolarized 15N NMR Signal in Blood Plasma

Hyperpolarized (HP) NMR can improve the sensitivity of conventional NMR experiments by several orders of magnitude, thereby making it feasible to detect the signal of low sensitivity nuclei such as 13C and 15N nuclei in vivo. Hyperpolarized substrates are usually administered by direct injection into the bloodstream, and interaction with serum albumin can cause rapid decay of the hyperpolarized signal due to the shortening of the spin-lattice (T1) relaxation time. Here we report that the 15N T1 of 15N labeled, partially deuterated tris(2-pyridylmethyl)amine decreases dramatically upon binding to albumin to such an extent that no HP-15 signal could be detected. We also demonstrate that the signal could be restored using a competitive displacer, iophenoxic acid, which binds stronger to albumin than tris(2-pyridylmethyl)amine. The methodology presented here eliminates the undesirable effect of albumin binding and should widen the range of hyperpolarized probes for in vivo studies.

Screening of Protein-Ligand Binding Using a SABRE Hyperpolarized Reporter

Hyperpolarization through signal amplification by reversible exchange (SABRE) provides a facile means to enhance nuclear magnetic resonance (NMR) signals of small molecules containing an N-heterocycle or other binding site for a polarization transfer catalyst. A purpose-designed reporter ligand, which is capable of binding both to a target protein and to the catalyst, makes the sensitivity enhancement by this technique compatible with the measurement of a range of biomolecular interactions. The ¹H polarization of the reporter ligand 4-amidinopyridine, which is targeting trypsin, is used to screen ligands that are not themselves hyperpolarizable by SABRE. The respective protein-ligand dissociation constants (K_D) are determined by an observed change in the R₂ relaxation rate of the reporter. A calculation of expected signal changes indicates that the accessible ligand K_D values extend over several orders of magnitude, while the concentrations of target proteins and ligands can be reduced considering the sensitivity gains from hyperpolarization. In general, the design of a single, weakly binding ligand for a target protein enables the use of SABRE hyperpolarization for ligand screening or other biophysical studies involving macromolecular interactions.

Interfacing Liquid State Hyperpolarization Methods with NMR Instrumentation

Advances in liquid state hyperpolarization methods have enabled new applications of high-resolution NMR spectroscopy. Utilizing strong signal enhancements from hyperpolarization allows performing NMR spectroscopy at low concentration, or with high time resolution. Making use of the high, but rapidly decaying hyperpolarization in the liquid state requires new techniques to interface hyperpolarization equipment with liquid state NMR spectrometers. This article highlights rapid injection, high resolution NMR spectroscopy with hyperpolarization produced by the techniques of dissolution dynamic nuclear polarization (D-DNP) and para-hydrogen induced polarization (PHIP). These are popular, albeit not the only methods to produce high polarization levels for liquid samples. Gas and liquid driven sample injection techniques are compatible with both of these hyperpolarization methods. The rapid sample injection techniques are combined with adapted NMR experiments working in a single, or small number of scans. They expand the application of liquid state hyperpolarization to spins with comparably short relaxation times, provide enhanced control over sample conditions, and allow for mixing experiments to study reactions in real time.

Detection of Protein-Ligand Interactions by 19F Nuclear Magnetic Resonance Using Hyperpolarized Water

The transfer of nuclear spin hyperpolarization from water to ligand 19F spins results in a transient signal change that is indicative of protein-ligand interaction. The 19F nucleus allows for background-free detection of these signals, which are modulated by polarization transfer via pathways similar to those in a hyperpolarized 1H water LOGSY experiment. Quantification of the apparent heteronuclear cross-relaxation rates is facilitated by a simultaneous dual-channel detection of 1H and 19F signals. Calculated cross-relaxation rates for the 1H-19F transfer step indicate that these rates are sensitive to binding to medium- and large-sized proteins. The heteronuclear observation of hyperpolarization transfer from water may be used to screen protein-ligand interactions in drug discovery and other applications.

Application of Relaxation Dispersion of Hyperpolarized 13 C Spins to Protein-Ligand Binding

Nuclear spin relaxation dispersion parameters are proposed as indicators of the binding mode of a ligand to a protein. Hyperpolarization by dissolution dynamic nuclear polarization (D-DNP) provided a ¹³ C signal enhancement between 3000-6000 for the ligand 4-(trifluoromethyl) benzene-1-carboximidamide binding to trypsin. The measurement of ¹³ C R₂ relaxation dispersion was enabled without isotope enrichment, using a series of single-scan Carr-Purcell-Meiboom-Gill experiments with variable refocusing delays. The magnitude in dispersion for the spins of the ligand is correlated to the position with respect to the salt bridge between protein and the amidine group of the ligand, indicating the ligand binding orientation. Hyperpolarized relaxation dispersion is an alternative to chemical shift or NOE measurements for determining ligand binding modes.

Characterization of protein-ligand interactions by SABRE

Nuclear spin hyperpolarization through signal amplification by reversible exchange (SABRE), the non-hydrogenative version of para-hydrogen induced polarization, is demonstrated to enhance sensitivity for the detection of biomacromolecular interactions. A target ligand for the enzyme trypsin includes the binding motif for the protein, and at a distant location a heterocyclic nitrogen atom for interacting with a SABRE polarization transfer catalyst. This molecule, 4-amidinopyridine, is hyperpolarized with 50% para-hydrogen to yield enhancement values ranging from −87 and −34 in the ortho and meta positions of the heterocyclic nitrogen, to −230 and −110, for different solution conditions. Ligand binding is identified by flow-NMR, in a two-step process that separately optimizes the polarization transfer in methanol while detecting the interaction in a predominantly aqueous medium. A single scan Carr–Purcell–Meiboom–Gill (CPMG) experiment identifies binding by the change in R₂ relaxation rate. The SABRE hyperpolarization technique provides a cost effective means to enhance NMR of biological systems, for the identification of protein–ligand interactions and other applications.

Protein–ligand binding interactions are characterized by the para-H₂ based hyperpolarization technique SABRE and flow-NMR. Binding to the protein is identified by R₂ change of a ligand first interacting with the Ir polarization transfer catalyst.

19F NMR viewed through two different lenses: ligand-observed and protein-observed 19F NMR applications for fragment-based drug discovery

19F NMR has emerged as a powerful tool in drug discovery, particularly in fragment-based screens. The favorable magnetic resonance properties of the fluorine-19 nucleus, the general absence of fluorine in biological settings, and its ready incorporation into both small molecules and biopolymers, has enabled multiple applications of 19F NMR using labeled small molecules and proteins in biophysical, biochemical, and cellular experiments. This review will cover developments in ligand-observed and protein-observed 19F NMR experiments tailored towards drug discovery with a focus on fragment screening. We also cover the key advances that have furthered the field in recent years, including quantitative, structural, and in-cell methodologies. Several case studies are described for each application to highlight areas for innovation and to further catalyze new NMR developments for using this versatile nucleus.

Practical dissolution dynamic nuclear polarization

This review article intends to provide insightful advice for dissolution-dynamic nuclear polarization in the form of a practical handbook. The goal is to aid research groups to effectively perform such experiments in their own laboratories. Previous review articles on this subject have covered a large number of useful topics including instrumentation, experimentation, theory, etc. The topics to be addressed here will include tips for sample preparation and for checking sample health; a checklist to correctly diagnose system faults and perform general maintenance; the necessary mechanical requirements regarding sample dissolution; and aids for accurate, fast and reliable polarization quantification. Herein, the challenges and limitations of each stage of a typical dissolution-dynamic nuclear polarization experiment are presented, with the focus being on how to quickly and simply overcome some of the limitations often encountered in the laboratory.

Porous functionalized polymers enable generating and transporting hyperpolarized mixtures of metabolites

Hyperpolarization by dissolution dynamic nuclear polarization (dDNP) has enabled promising applications in spectroscopy and imaging, but remains poorly widespread due to experimental complexity. Broad democratization of dDNP could be realized by remote preparation and distribution of hyperpolarized samples from dedicated facilities. Here we show the synthesis of hyperpolarizing polymers (HYPOPs) that can generate radical- and contaminant-free hyperpolarized samples within minutes with lifetimes exceeding hours in the solid state. HYPOPs feature tunable macroporous porosity, with porous volumes up to 80% and concentration of nitroxide radicals grafted in the bulk matrix up to 285 μmol g-1. Analytes can be efficiently impregnated as aqueous/alcoholic solutions and hyperpolarized up to P(13C) = 25% within 8 min, through the combination of 1H spin diffusion and 1H → 13C cross polarization. Solutions of 13C-analytes of biological interest hyperpolarized in HYPOPs display a very long solid-state 13C relaxation times of 5.7 h at 3.8 K, thus prefiguring transportation over long distances.

Dynamic Nuclear Polarization Using 3D Aromatic Boron Cluster Radicals

A set of two dodecaborate [B₁₂(OR)₁₂]^1- radical cluster anions containing a dense layer of fluorinated end-groups provides nuclear spin hyperpolarization via the dissolution dynamic nuclear polarization (D-DNP) technique. We show that these clusters can enhance ¹⁹F nuclear magnetic resonance (NMR) signals. Importantly, given the inherent radical delocalization in dodecaborate-based clusters, these species are compatible with reactive compounds such as Lewis acids, providing ∼1000-2000 times of signal enhancement for B(C₆F₅)₃ in liquid state NMR spectroscopy experiments at 9.4 Tesla. This observation suggests that 3D aromatic radicals can provide advantages over the conventional radical species that are currently used for DNP such as 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) by showing superior chemical compatibility. The ability to hyperpolarize reactive compounds using [B₁₂(OR)₁₂]^1- cluster radicals opens up new applications of reaction monitoring by D-DNP NMR spectroscopy, including the observation of catalytically active species in complex reaction mixtures.

The precious fluorine on the ring: fluorine NMR for biological systems

The fluorine-19 nucleus was recognized early to harbor exceptional properties for NMR spectroscopy. With 100% natural abundance, a high gyromagnetic ratio (83% sensitivity compared to 1H), a chemical shift that is extremely sensitive to its surroundings and near total absence in biological systems, it was destined to become a favored NMR probe, decorating small and large molecules. However, after early excitement, where uptake of fluorinated aromatic amino acids was explored in a series of animal studies, 19F-NMR lost popularity, especially in large molecular weight systems, due to chemical shift anisotropy (CSA) induced line broadening at high magnetic fields. Recently, two orthogonal approaches, (i) CF3 labeling and (ii) aromatic 19F-13C labeling leveraging the TROSY (Transverse Relaxation Optimized Spectroscopy) effect have been successfully applied to study large biomolecular systems. In this perspective, we will discuss the fascinating early work with fluorinated aromatic amino acids, which reveals the enormous potential of these non-natural amino acids in biological NMR and the potential of 19F-NMR to characterize protein and nucleic acid structure, function and dynamics in the light of recent developments. Finally, we explore how fluorine NMR might be exploited to implement small molecule or fragment screens that resemble physiological conditions and discuss the opportunity to follow the fate of small molecules in living cells.

Heteronuclear DNP of 1H and 19F nuclei using BDPA as a polarizing agent

The study reveals heteronuclear-thermal mixing – a novel mechanism of dynamic nuclear polarization in a system with ¹H and ¹⁹F nuclei.

Detecting acetylated aminoacids in blood serum using hyperpolarized 13C-1Η-2D-NMR

Dynamic Nuclear Polarization (DNP) can substantially enhance the sensitivity of NMR experiments. Among the implementations of DNP, ex-situ dissolution DNP (dDNP) achieves high signal enhancement levels owing to a combination of a large temperature factor between 1.4 and 300 K with the actual DNP effect in the solid state at 1.4 K. For sufficiently long T₁ relaxation times much of the polarization can be preserved during dissolution with hot solvent, thus enabling fast experiments during the life time of the polarization. Unfortunately, for many metabolites found in biological samples such as blood, relaxation times are too short to achieve a significant enhancement. We have therefore introduced ¹³C-carbonyl labeled acetyl groups as probes into amino acid metabolites using a simple reaction protocol. The advantage of such tags is a sufficiently long T₁ relaxation time, the possibility to enhance signal intensity by introducing ¹³C, and the possibility to identify tagged metabolites in NMR spectra. We demonstrate feasibility for mixtures of amino acids and for blood serum. In two-dimensional dDNP-enhanced HMQC experiments of these samples acquired in 8 s we can identify acetylated amino acids and other metabolites based on small differences in chemical shifts.

Systems NMR: single-sample quantification of RNA, proteins and metabolites for biomolecular network analysis

Cellular behavior is controlled by the interplay of diverse biomolecules. Most experimental methods, however, can only monitor a single molecule class or reaction type at a time. We developed an in vitro nuclear magnetic resonance spectroscopy (NMR) approach, which permitted dynamic quantification of an entire 'heterotypic' network-simultaneously monitoring three distinct molecule classes (metabolites, proteins and RNA) and all elementary reaction types (bimolecular interactions, catalysis, unimolecular changes). Focusing on an eight-reaction co-transcriptional RNA folding network, in a single sample we recorded over 35 time points with over 170 observables each, and accurately determined five core reaction constants in multiplex. This reconstruction revealed unexpected cross-talk between the different reactions. We further observed dynamic phase-separation in a system of five distinct RNA-binding domains in the course of the RNA transcription reaction. Our Systems NMR approach provides a deeper understanding of biological network dynamics by combining the dynamic resolution of biochemical assays and the multiplexing ability of 'omics'.

Spy vs. spy: selecting the best reporter for 19F NMR competition experiments

Systematic characterization of a series of fluorinated VHL ligands, varying binding affinity and position of the trifluoromethyl group, qualifies a spy molecule for competitive 19F NMR screening and reveals guiding principles to develop highly sensitive assays with low material consumption.

Applications of Dissolution-DNP for NMR Screening

Experimental screening for protein-ligand interactions is a central task in drug discovery. Nuclear magnetic resonance (NMR) spectroscopy enables the determination of binding affinities, as well as the measurement of structural and dynamic parameters governing the interaction. With traditional liquid-state NMR relying on a nuclear spin polarization on the order of 10-5, hyperpolarization methods such as dissolution dynamic nuclear polarization (D-DNP) can increase signals by several orders of magnitude. The resulting increase in sensitivity has the potential to reduce requirements for the concentration of protein and ligands, improve the accuracy of the detection of interaction by allowing the use of near-stoichiometric conditions, and increase throughput. This chapter introduces a selection of basic techniques for the application of D-DNP to screening. Procedures for hyperpolarization are briefly reviewed, followed by the description of NMR methods for detection of binding through changes in chemical shift and relaxation parameters. Experiments employing competitive binding with a known ligand are shown, which can be used to determine binding affinity or yield structural information on the pharmacophore. The specific challenges of working with nonrenewable hyperpolarization are reviewed, and solutions including the use of multiplexed NMR detection are described. Altogether, the methods summarized in this chapter are intended to allow for the efficient detection of binding affinity, structure, and dynamics facilitated through substantial signal enhancements provided by hyperpolarization.

Determination of binding affinities using hyperpolarized NMR with simultaneous 4-channel detection

Dissolution dynamic nuclear polarization (D-DNP) is a powerful technique to improve NMR sensitivity by a factor of thousands. Combining D-DNP with NMR-based screening enables to mitigate solubility or availability problems of ligands and target proteins in drug discovery as it can lower the concentration requirements into the sub-micromolar range. One of the challenges that D-DNP assisted NMR screening methods face for broad application, however, is a reduced throughput due to additional procedures and time required to create hyperpolarization. These requirements result in a delay of several tens of minutes in-between each NMR measurement. To solve this problem, we have developed a simultaneous 4-channel detection method for hyperpolarized ¹⁹F NMR, which can increase throughput fourfold by utilizing a purpose-built multiplexed NMR spectrometer and probe. With this system, the concentration-dependent binding interactions were observed for benzamidine and benzylamine with the serine protease trypsin. A T₂ relaxation measurement of a hyperpolarized reporter ligand (TFBC; CF₃C₆H₄CNHNH₂), which competes for the same binding site on trypsin with the other ligands, was used. The hyperpolarized TFBC was mixed with trypsin and the ligand of interest, and injected into four flow cells inside the NMR probe. Across the set of four channels, a concentration gradient was created. From the simultaneously acquired relaxation datasets, it was possible to determine the dissociation constant (K_D) of benzamidine and benzylamine without the requirement for individually optimizing experimental conditions for different affinities. A simulation showed that this 4-channel detection method applied to D-DNP NMR extends the screenable K_D range to up to three orders of magnitude in a single experiment.

Applications of dissolution dynamic nuclear polarization in chemistry and biochemistry

Sensitivity of detection is one of the most limiting aspects when applying NMR spectroscopy to current problems in the molecular sciences. A number of hyperpolarization methods exist for increasing the population difference between nuclear spin Zeeman states and enhance the signal-to-noise ratio by orders of magnitude. Among these methods, dissolution dynamic nuclear polarization (D-DNP) is unique in its capability of providing high spin polarization for many types of molecules in the liquid state. Originally proposed for biomedical applications including in vivo imaging, applications in high resolution NMR spectroscopy are now emerging. These applications are the focus of the present review. Using D-DNP, a small sample aliquot is first hyperpolarized as a frozen solid at low temperature, followed by dissolution into the liquid state. D-DNP extends the capabilities of liquid state NMR spectroscopy towards shorter timescales and enables the study of nonequilibrium processes, such as the kinetics and mechanisms of reactions. It allows the determination of intermolecular interactions, in particular based on spin relaxation parameters. At the same time, a challenge in the application of this hyperpolarization method is that spin polarization is nonrenewable. Substantial effort has been devoted to develop methods for enabling rapid correlation spectroscopy, the measurement of time-dependent signals, and the extension of the observable time window. With these methods, D-DNP has the potential to open new application areas in the chemical and biochemical sciences.

Mapping Conformational Dynamics to Individual Steps in the TEM-1 β-Lactamase Catalytic Mechanism

Conformational dynamics are increasingly recognized as being essential for enzyme function. However, there is virtually no direct experimental evidence to support the notion that individual dynamic modes are required for specific catalytic processes, apart from the initial step of substrate binding. In this work, we use a unique approach based on millisecond hydrogen-deuterium exchange mass spectrometry to identify dynamic modes linked to individual catalytic processes in the antibiotic resistance enzyme TEM-1 β-lactamase. Using a "good" substrate (ampicillin), a poorly hydrolyzed substrate (cephalexin) and a covalent inhibitor (clavulanate), we are able to isolate dynamic modes that are specifically linked to substrate binding, productive lactam ring hydrolysis and deacylation. These discoveries are ultimately translated into specific targets for allosteric TEM-1 inhibitor development.

Direct hyperpolarization of micro- and nanodiamonds for bioimaging applications - Considerations on particle size, functionalization and polarization loss

Due to the inherently long relaxation time of ¹³C spins in diamond, the nuclear polarization enhancement obtained with dynamic nuclear polarization can be preserved for a time on the order of about one hour, opening up an opportunity to use diamonds as a new class of long-lived contrast agents. The present communication explores the feasibility of using ¹³C spins in directly hyperpolarized diamonds for MR imaging including considerations for potential in vivo applications.

In-Vitro Dissolution Dynamic Nuclear Polarization for Sensitivity Enhancement of NMR with Biological Molecules

Dissolution dynamic nuclear polarization (D-DNP) is a technique to prepare hyperpolarized nuclear spin states, yielding a signal enhancement of several orders of magnitude for liquid-state NMR. Here, we describe experimental procedures for the application of D-DNP in high-resolution NMR of biochemical compounds, to determine the time evolution of biochemical processes and intermolecular interactions.

19 F NMR transverse and longitudinal relaxation filter experiments for screening: a theoretical and experimental analysis

Ligand-based ¹⁹ F NMR screening represents an efficient approach for performing binding assays. The high sensitivity of the methodology to receptor binding allows the detection of weak affinity ligands. The observable NMR parameters that are typically used are the ¹⁹ F transverse relaxation rate and isotropic chemical shift. However, there are few cases where the ¹⁹ F longitudinal relaxation rate should also be used. A theoretical and experimental analysis of the ¹⁹ F NMR transverse and longitudinal relaxation rates at different magnetic fields is presented along with proposed methods for improving the sensitivity and dynamic range of these experiments applied to fragment-based screening. Copyright © 2016 John Wiley & Sons, Ltd.

NMR in drug discovery: A practical guide to identification and validation of ligands interacting with biological macromolecules

Protein-ligand interactions are at the heart of drug discovery research. NMR spectroscopy is an excellent technology to identify and validate protein-ligand interactions. A plethora of NMR methods are available which are powerful, robust and information-rich, but also have pitfalls and limitations. In this review, we will focus on how to choose between different experiments, and assess their strengths and liabilities. We introduce the concept of the validation cross, which helps to categorize experiments according to their information content and to simplify the choice of the right experiment in order to address a specific question. Additionally, we will provide the framework for drawing correct conclusions from experimental results in order to accurately evaluate such interactions. Out of scope for this review are methods for subsequent characterization of the interaction such as quantitative K_D determination, binding mode analysis, or structure determination.

Parallelized Ligand Screening Using Dissolution Dynamic Nuclear Polarization

Protein-ligand interactions are frequently screened using nuclear magnetic resonance (NMR) spectroscopy. The dissociation constant (K_D) of a ligand of interest can be determined via a spin-spin relaxation measurement of a reporter ligand in a single scan when using hyperpolarization by means of dissolution dynamic nuclear polarization (D-DNP). Despite nearly instantaneous signal acquisition, a limitation of D-DNP for the screening of protein-ligand interactions is the required polarization time on the order of tens of minutes. Here, we introduce a multiplexed NMR experiment, where a single hyperpolarized ligand sample is rapidly mixed with protein injected into two flow cells. NMR detection is achieved simultaneously on both channels, resulting in a chemical shift resolved spin relaxation measurement. Spectral resolution allows the use of reference compounds for accurate quantification of concentrations. Simultaneous use of two concentration ratios between protein and ligand broadens the range of K_D that is accurately measurable in a single experiment to at least an order of magnitude. In a comparison of inhibitors for the protein trypsin, the average K_D values of benzamidine and benzylamine were found to be 12.6 ± 1.4 μM and 207 ± 22 μM from three measurements, based on K_D = 142 μM assumed known for the reporter ligand 4-(trifluoromethyl)benzene-1-carboximidamide. Typical confidence ranges at 95% evaluated for single experiments were (8.3 μM, 20 μM) and (151 μM, 328 μM). The multiplexed detection of two or more hyperpolarized samples increases throughput of D-DNP by the same factor, improving the applicability to most multipoint measurements that would traditionally be achieved using titrations.

Direct and cost-efficient hyperpolarization of long-lived nuclear spin states on universal (15)N2-diazirine molecular tags

Conventional magnetic resonance (MR) faces serious sensitivity limitations which can be overcome by hyperpolarization methods, but the most common method (dynamic nuclear polarization) is complex and expensive, and applications are limited by short spin lifetimes (typically seconds) of biologically relevant molecules. We use a recently developed method, SABRE-SHEATH, to directly hyperpolarize (15)N2 magnetization and long-lived (15)N2 singlet spin order, with signal decay time constants of 5.8 and 23 minutes, respectively. We find >10,000-fold enhancements generating detectable nuclear MR signals that last for over an hour. (15)N2-diazirines represent a class of particularly promising and versatile molecular tags, and can be incorporated into a wide range of biomolecules without significantly altering molecular function.