Silver-Mediated Oxidative Aliphatic CH Trifluoromethylthiolation

Radical and Cationic Pathways in C(sp3)-H Bond Oxygenation by Dioxiranes of Bicyclic and Spirocyclic Hydrocarbons Bearing Cyclopropane Moieties

A product and DFT computational study on the reactions of 3-ethyl-3-(trifluoromethyl)dioxirane (ETFDO) with bicyclic and spirocyclic hydrocarbons bearing cyclopropyl groups was carried out. With bicyclo[n.1.0]alkanes (n = 3-6), diastereoselective formation of the alcohol product derived from C2-H bond hydroxylation was observed, accompanied by smaller amounts of products derived from oxygenation at other sites. With 1-methylbicyclo[4.1.0]heptane, rearranged products were also observed in addition to the unrearranged products deriving from oxygenation at the most activated C2-H and C5-H bonds. With spiro[2.5]octane and 6-tert-butylspiro[2.5]octane, reaction with ETFDO occurred predominantly or exclusively at the axial C4-H to give unrearranged oxygenation products, accompanied by smaller amounts of rearranged bicyclo[4.2.0]octan-1-ols. The good to outstanding site-selectivities and diastereoselectivities are paralleled by the calculated activation free energies for the corresponding reaction pathways. Computations show that the σ* orbitals of the bicyclo[n.1.0]alkane cis or trans C2-H bonds and spiro[2.5]octanes axial C4-H bond hyperconjugatively interact with the Walsh orbitals of the cyclopropane ring, activating these bonds toward HAT to ETFDO. The detection of rearranged oxygenation products in the oxidation of 1-methylbicyclo[4.1.0]heptane, spiro[2.5]octane, and 6-tert-butylspiro[2.5]octane provides unambiguous evidence for the involvement of cationic intermediates in these reactions, representing the first examples on the operation of ET pathways in dioxirane-mediated C(sp3)-H bond oxygenations. Computations support these findings, showing that formation of cationic intermediates is associated with specific stabilizing hyperconjugative interactions between the incipient carbon radical and the cyclopropane C-C bonding orbitals that trigger ET to the incipient dioxirane derived 1,1,1-trifluoro-2-hydroxy-2-butoxyl radical.

Total Synthesis of (-)-5-Deoxyenterocin and Attempted Late-Stage Functionalization Reactions

The first total synthesis of (-)-5-deoxyenterocin has been accomplished starting from pentane-1,3,5-triol (16 steps in the longest linear sequence, 0.2 % overall yield). (-)-Menthone served as the source of chirality to distinguish the enantiotopic hydroxymethyl groups of the substrate. Key steps of the synthesis include two aldol reactions to either end of the C5 -skeleton, a diastereoselective hydroxylation reaction and a biomimetic twofold intramolecular aldol reaction as the final step. Although this step suffered from geometrical constraints and was low yielding (10 %), enough synthetic material could be secured to substantiate the relative and absolute configuration of the natural product. Additional experiments were directed toward a C-H functionalization at carbon atom C5. Despite the fact that several protocols could be successfully applied to (3aR)-(+)-sclareolide as model substrate, (-)-5-deoxyenterocin withstood any selective functionalization.

Radical approaches to C-S bonds

Organosulfur functionalities are ubiquitous in nature, pharmaceuticals, agrochemicals, materials and flavourants. Historically, these moieties were introduced almost exclusively using ionic chemistry; however, radical-based methods for the installation of sulfur-based functional groups have recently come to the fore. These radical methods have enabled their late-stage introduction into complex molecules, avoiding the need to preserve labile organosulfur moieties through multistep synthetic sequences. Here, we discuss homolytic C-S bond-forming processes, with a particular emphasis on radical substitution approaches to sulfide, disulfide and sulfinyl products, and the use of sulfur dioxide and its surrogates to build sulfonyl products. We also highlight the mechanistic considerations that we hope will guide further development of radical-based strategies compatible with the various organosulfur moieties that feature in modern chemistry.

Late-stage Functionalization for Improving Drug-like Molecular Properties

The development of late-stage functionalization (LSF) methodologies, particularly C-H functionalization, has revolutionized the field of organic synthesis. Over the past decade, medicinal chemists have begun to implement LSF strategies into their drug discovery programs, allowing for the drug discovery process to become more efficient. Most reported applications of late-stage C-H functionalization of drugs and drug-like molecules have been to rapidly diversify screening libraries to explore structure-activity relationships. However, there has been a growing trend toward the use of LSF methodologies as an efficient tool for improving drug-like molecular properties of promising drug candidates. In this review, we have comprehensively reviewed recent progress in this emerging area. Particular emphasis is placed on case studies where multiple LSF techniques were implemented to generate a library of novel analogues with improved drug-like properties. We have critically analyzed the current scope of LSF strategies to improve drug-like properties and commented on how we believe LSF can transform drug discovery in the future. Overall, we aim to provide a comprehensive survey of LSF techniques as tools for efficiently improving drug-like molecular properties, anticipating its continued uptake in drug discovery programs.

Electrophilic Reagents for the Direct Incorporation of Uncommon SCF2CF2H and SCF2CF3 Motifs

The introduction of fluoroalkylthioether groups has attracted the attention of the drug-discovery community given the special physicochemical and pharmacokinetic features they confer to bioactive compounds, yet these are often limited to standard SCF₃ and SCF₂H moieties. Herein, two saccharin-based electrophilic reagents have been disclosed for the incorporation of uncommon SCF₂CF₂H and SCF₂CF₃ motifs. Their reactivity performance, multigram-scale preparation, and divergent derivatization have been thoroughly investigated with a variety of nucleophiles, including natural products and pharmaceuticals.

Copper-assisted trifluoromethylthiolation/radical cascade cyclization of alkynes to construct SCF3-containing dioxodibenzothiazepines

A mild and efficient Cu-assisted trifluoromethylthiolation/radical cascade cyclization of alkynes with readily available and stable AgSCF₃ as the trifluoromethylthiolating reagent has been disclosed. This transformation provides an opportunity to construct a series of potential medicinally valuable trifluoromethylthio-substituted dioxodibenzothiazepines with wide functional group compatibility. This protocol opens up a new avenue for the construction of useful trifluoromethylthiolated seven-membered N-heterocycles.

Resolving Oxygenation Pathways in Manganese-Catalyzed C(sp3)-H Functionalization via Radical and Cationic Intermediates

The C(sp³)–H bond oxygenation of the cyclopropane-containing mechanistic probes 6-tert-butylspiro[2.5]octane and spiro[2.5]octane with hydrogen peroxide catalyzed by manganese complexes bearing aminopyridine tetradentate ligands has been studied. Mixtures of unrearranged and rearranged oxygenation products (alcohols, ketones, and esters) are obtained, suggesting the involvement of cationic intermediates and the contribution of different pathways following the initial hydrogen atom transfer-based C–H bond cleavage step. Despite such a complex mechanistic scenario, a judicious choice of the catalyst structure and reaction conditions (solvent, temperature, and carboxylic acid) could be employed to resolve these oxygenation pathways, leading, with the former substrate, to conditions where a single unrearranged or rearranged product is obtained in good isolated yield. Taken together, the work demonstrates an unprecedented ability to precisely direct the chemoselectivity of the C–H oxidation reaction, discriminating among multiple pathways. In addition, these results conclusively demonstrate that stereospecific C(sp³)–H oxidation can take place via a cationic intermediate and that this path can become exclusive in governing product formation, expanding the available toolbox of aliphatic C–H bond oxygenations. The implications of these findings are discussed in the framework of the development of synthetically useful C–H functionalization procedures and the associated mechanistic features.

Direct Trifluoromethylthiolation of Aziridines: Cation-Controlled Diverse Synthesis of Trifluoromethylthiolated Isothiocyanates and Amines

The direct trifluoromethylthiolation of aziridines with AgSCF₃ and iodides is reported. The β-trifluoromethylthiolated isothiocyanates and amines were selectively obtained by the changed cation of iodide. This strategy is tolerant to a wide range of functional groups with good yields and regioselectivities. In addition, the isothiocyanates can be used for further synthetic manipulation, which offered a convenient approach for SCF₃-containing compounds.

Electronic control over site-selectivity in hydrogen atom transfer (HAT) based C(sp3)-H functionalization promoted by electrophilic reagents

The direct functionalization of C(sp³)-H bonds represents one of the most investigated approaches to develop new synthetic methodology. Among the available strategies for intermolecular C-H bond functionalization, increasing attention has been devoted to hydrogen atom transfer (HAT) based procedures promoted by radical or radical-like reagents, that offer the opportunity to introduce a large variety of atoms and groups in place of hydrogen under mild conditions. Because of the large number of aliphatic C-H bonds displayed by organic molecules, in these processes control over site-selectivity represents a crucial issue, and the associated factors have been discussed. In this review article, attention will be devoted to the role of electronic effects on C(sp³)-H bond functionalization site-selectivity. Through an analysis of the recent literature, a detailed description of the HAT reagents employed in these processes, the associated mechanistic features and the selectivity patterns observed in the functionalization of substrates of increasing structural complexity will be provided.

Tandem trifluoromethylthiolation and cyclization of N-aryl-3-butenamides with AgSCF3: divergent access to CF3S-substituted 3,4-dihydroquinolin-2-ones and azaspiro[4,5]dienones

A AgSCF3-mediated tandem trifluoromethylthiolaton and cyclization of N-aryl-3-butenamides was developed. It showed divergent reactivities and enabled the selective syntheses of CF3S-substituted 3,4-dihydroquinolin-2-ones and azaspiro[4,5]dienones. The selectivity was achieved through different...

Silver-Mediated Radical Oxytrifluoromethylation of Unstaurated Carboxylic Acids for the Synthesis of γ-Trifluoromethylthio Lactones

An efficient silver-mediated oxidative trifluoromethylthiolation of unsaturated carboxylic acids to constructed trifluoromethylthiole-containing lactones has been disclosed. This protocol without added other metal-catalyst, preliminary mechanism investigations suggested that a free-radical pathway...

Transition metal catalysed direct sulfanylation of unreactive C-H bonds: an overview of the last two decades

Transition metal catalysed direct sulfanylations of unreactive C-H bonds have become a unique and straightforward synthetic strategy in late-stage C-S bond formation of relevant complex molecules. Such transformations have represented...

Intermolecular CDC amination of remote and proximal unactivated Csp3 -H bonds through intrinsic substrate reactivity - expanding towards a traceless directing group

An intermolecular radical based distal selectivity in appended alkyl chains has been developed. The selectivity is maximum when the distal carbon is γ to the appended group and decreases by moving from γ → δ → ε positions. In –COO– linked alkyl chains, the same distal γ-selectivity is observed irrespective of its origin, either from the alkyl carboxy acid or alkyl alcohol. The appended groups include esters, N–H protected amines, phthaloyl, sulfone, sulfinimide, nitrile, phosphite, phosphate and borate esters. In borate esters, boron serves as a traceless directing group, which is hitherto unprecedented for any remote C_sp³–H functionalization. The selectivity order follows the trend: 3° benzylic > 2° benzylic > 3° tertiary > α to keto > distal methylene (γ > δ > ε). Computations predicted the radical stability (thermodynamic factors) and the kinetic barriers as the factors responsible for such trends. Remarkably, this strategy eludes any designer catalysts, and the selectivity is due to the intrinsic substrate reactivity.

An intermolecular amination at the distal methylene carbon has been realized in an appended alkyl chain with electron withdrawing groups. Traceless remote C_sp³–H functionalization has been accomplished using borate esters.

Photocatalytic C-H Trifluoromethylthiolation by the Decatungstate Anion

A broadly applicable method for the trifluoromethylthiolation of methylene C(sp³)-H, methine C(sp³)-H, α-oxygen C(sp³)-H, and formyl C(sp²)-H bonds is presented using the decatungstate anion as the sole catalyst. By adjusting the substrate ratio and reaction concentration, this method was applied to 40 examples in good regioselectivities, including the derivatization of natural products. Furthermore, SCF₃-drug analogues were synthesized by subsequent functionalization of the SCF₃ products, highlighting the importance of this photocatalyzed C-H functionalization.

Radical-Promoted Distal C-H Functionalization of C(sp3 ) Centers with Fluorinated Moieties

Due to their unique properties, fluorinated scaffolds are pivotal compounds in pharmaceuticals, agrochemicals, and materials science. Over the last years, the development of versatile strategies for the selective synthesis of fluorinated molecules by direct C-H bond functionalization has attracted a lot of attention. In particular, the design of novel transformations based on a radical process was a bottleneck for distal C-H functionalization reactions, offering synthetic solutions for the selective introduction of fluorinated groups. This Minireview highlights the major contributions in this blossoming field. The development of new methodologies for the remote functionalization of aliphatic derivatives with various fluorinated groups based on a 1,5-hydrogen atom transfer process and a β-fragmentation reaction will be showcased and discussed.

Silver-catalysed C–H bond activation: a recent review

Transition metal catalysed C–H activations are efficient, simple, mild, cost-effective and stereoselective, and many of them are environmentally sustainable transformations.

Using the Thiyl Radical for Aliphatic Hydrogen-Atom Transfer: Thiolation of Unactivated C-H Bonds

A metal- and catalyst-free thiyl-radical-mediated activation of alkanes is described. Tetrafluoropyridinyl disulfide is used to perform thiolation of the C-H bonds under irradiation with 400 nm light-emitting diodes. The key C-H activation step is believed to proceed via hydrogen-atom abstraction effected by the fluorinated thiyl radical. Secondary, tertiary, and heteroatom-substituted C-H bonds can be involved in the thiolation reaction. The resulting sulfides have wide potential as photoredox-active radical precursors in reactions with alkenes and heteroarenes.

Perfluoroalkylation of Thiosulfonates: Synthesis of Perfluoroalkyl Sulfides

A practical synthesis of perfluoroalkyl sulfides is described. The method employs stable and readily accessible thiosulfonates as new electrophiles with commercial nucleophilic perfluoroalkylating reagents. The mild reaction conditions allow access to a wide variety of both aryl- and alkyl-substituted perfluoroalkyl sulfides amenable to pharmaceutical development. Furthermore, the reaction operation is straightforward, odorless, does not produce toxic wastes, and, therefore should appeal to practitioners in industrial-scale productions.

Geometrically Selective Denitrative Trifluoromethylthiolation of β-Nitrostyrenes with AgSCF3 for (E)-Vinyl Trifluoromethyl Thioethers

An efficient copper(II)-promoted denitrative trifluoromethylthiolation under mild reaction conditions has been developed for vinyl trifluoromethyl thioethers to construct C_vinyl-SCF₃ bonds with stable AgSCF₃ as a source of the trifluoromethylthio. This reaction system tolerates a broad range of functional groups to commendably achieve a high product yield and excellent stereoselectivity of E/Z.

Enantioselective catalytic synthesis of α-aryl-α-SCF3-β2,2-amino acids

We herein report a novel entry towards chiral α-SCF3-β2,2-amino acids by carrying out the ammonium salt-catalyzed α-trifluoromethylthiolation of isoxazolidin-5-ones. This approach allowed for high enantioselectivities and high yields and the obtained heterocycles proved to be versatile platforms to access other targets of potential interest.

Copper-catalyzed trifluoromethylthiolation-peroxidation of alkenes and allenes

Cu-catalyzed trifluoromethylthiolation-peroxidation of alkenes and allenes using AgSCF₃ and tert-butyl hydroperoxide has been developed. The method provides a variety of β-SCF₃ and β-vinyl-SCF₃ peroxides with excellent regio- and chemo-selectivities.

Copper-Catalyzed, N-Directed Csp3-H Trifluoromethylthiolation (-SCF3) and Trifluoromethylselenation (-SeCF3)

A direct and versatile copper-catalyzed trifluoromethylthiolation and trifluoromethylselenation of primary, secondary, and tertiary aliphatic C-H bonds was developed. The reaction provides direct access to molecules containing these emerging moieties in the presence of a wide range of common functional groups and in complex molecular environments.

Late-stage trifluoromethylthiolation of benzylic C-H bonds

The benzylic positions in drugs are sites that readily react with cytochrome P450 oxidases via single-electron oxidation. New synthetic methodologies to incorporate a fluoroalkyl group at the benzylic site are continually being developed, and in this paper, we report a metal-free and site-selective organophotoredox-catalyzed trifluoromethylthiolation of benzylic C-H bonds for a wide variety of alkyl arenes and heteroarenes. The precise and predictive regioselectivity among various C(sp³)-H bonds originates from an inner-sphere benzylic radical initiation mechanism, and avoids the use of external oxidants or hydrogen atom abstractors. Its practicality stems from the trifluoromethylthiolation of a series of drugs and complex organic molecules, which is overwhelmingly selective for benzyl groups. This operationally simple protocol can provide a general and practical access to structurally diverse benzylic trifluoromethyl sulfides produced from ubiquitous benzylic C-H bonds. Large scale trifluoromethylthiolation can be achieved with continuous flow photoredox technology.

Fluoroalkylation of C-H bonds is a class of reaction highly sought after in medicinal chemistry. Here, the authors report a regioselective organophotoredox-catalyzed, trifluoromethylthiolation of benzylic C-H bonds for a wide variety of alkyl (hetero)arenes, and demonstrate its utility in continuous flow.

Novel Bifunctionalization of Activated Methylene: Base-Promoted Trifluoromethylthiolation of β-Diketones with Trifluoromethanesulfinyl Chloride

A novel bifunctionalization of activated methylene was achieved successfully through the base-promoted trifluoromethylthiolation of β-diketones or β-ketoesters with trifluoromethanesulfinyl chloride. A series of α-trifluoromethylthiolated α-chloro-β-diketones and α-chloro-β-ketoesters were obtained in moderate to good yields under mild conditions. When β-diketones containing a phenyl group with a hydroxyl or amino substituent at the ortho position were used as substrates, intramolecular trifluoromethylthiolation/cyclization reaction took place to give the corresponding cyclic products. Furthermore, the protocol could be extended to perfluoroalkylthiolation with the sodium perfluoroalkanesulfinate/POCl₃ system. On the basis of experimental results, plausible mechanisms are proposed.

Silver-mediated oxidative functionalization of alkylsilanes

A general approach to the functionalization of aliphatic C-Si bonds in the presence of silver salts and oxidants has been reported. This strategy encompasses a range of valuable C-Si transformations, including the direct conversions of a C-Si bond to C-OCF3, C-OBz, C-OCOCF3, C-SCF3, C-SCN, and C-N3 bonds. Among them, trifluoromethoxylation of alkylsilanes is reported for the first time. In addition, mechanistic studies indicate that this reaction may proceed through a radical mechanism.

Visible-Light-Induced, Copper-Catalyzed Three-Component Coupling of Alkyl Halides, Olefins, and Trifluoromethylthiolate to Generate Trifluoromethyl Thioethers

Photoinduced, copper-catalyzed coupling reactions are emerging as a powerful method for generating Csp³-Y (Y = C or heteroatom) bonds from alkyl electrophiles and nucleophiles. Corresponding three-component couplings of alkyl electrophiles, olefins, and nucleophiles have the potential to generate an additional Csp³-Y bond and to efficiently add functional groups to both carbons of an olefin, which serves as a readily available linchpin. In this report, we establish that a variety of electrophiles and a trifluoromethylthiolate nucleophile can add across an array of olefins (including styrenes and electron-poor olefins) in the presence of CuI/binap and blue-LED irradiation, thereby generating trifluoromethyl thioethers in good yield. The process tolerates a wide range of functional groups, and an initial survey of other nucleophiles (i.e., bromide, cyanide, and azide) suggests that this three-component coupling strategy is versatile. Mechanistic studies are consistent with a photoexcited Cu(I)/binap/SCF₃ complex serving as a reductant to generate an alkyl radical from the electrophile, which likely reacts in turn with the olefin and a Cu(II)/SCF₃ complex to afford the coupling product.

Copper-Mediated Trifluoromethylation of Benzylic Csp3 -H Bonds

Trifluoromethyl-containing compounds play a significant role in medicinal chemistry, materials and fine chemistry. Although direct C-H trifluoromethylation has been achieved on Csp² -H bonds, direct conversion of Csp³ -H bonds to Csp³ -CF₃ remains challenging. We report herein an efficient protocol for the selective trifluoromethylation of benzylic C-H bonds. This process is mediated by a combination Cu^III -CF₃ species and persulfate salts. A wide range of methylarenes can be selectively trifluoromethylated at the benzylic positions. A combination of experimental and theoretical mechanistic studies suggests that the reaction involves a radical intermediate and a Cu^III -CF₃ species as the CF₃ transfer reagent.