Heterogeneously Catalyzed Direct CH Thiolation of Heteroarenes

Hydrazone-Linked Donor-Acceptor Covalent Organic Polymer as a Heterogeneous Photocatalyst for C-S Bond Formation

In the realm of solar energy utilization, there is a growing focus on designing and implementing effective photocatalytic systems, for the conversion of solar energy into valuable chemical fuels. The potential of Covalent Organic Polymers (COPs) as photocatalysts for visible-light-driven organic transformation has been widely investigated, positioning them as promising candidates in this field. In the design of COPs, introducing a donor-acceptor arrangement facilitates the transfer of electrons from the donor to the acceptor, creating a charge transfer complex and leading to enhanced conductivity and improved charge separation. Here we present a novel hydrazone-linked covalent organic polymer ETBC-PyHz containing TPE donor and pyridine acceptor. Utilizing this, an efficient method has been developed for an oxidative cross-coupling reaction involving C-S bond formation. This process involves arylhydrazines and arenethiols, and results in the production of unsymmetrical diaryl sulfides via the formation of aryl and thioarene radicals. This conversion holds significant importance because the byproducts produced during the process are nitrogen and water, making it environmentally benign.

Bismuth(III)-Catalyzed Regioselective Selenation of Indoles with Diaryl Diselenides: Synthesis of 3-Selanylindoles

Heterocyclic aryl selenides have recently attracted considerable research interest owing to their applications in biological and pharmaceutical fields. Herein, we describe a simple and general synthesis of 3-selanylindoles via a novel regioselective C-H selenation of indoles using a bismuth reagent as a catalyst. The reactions of indoles with diselenides in the presence of 10 mol% BiI3 at 100 °C in DMF afforded the corresponding 3-selanylindoles in moderate-to-excellent yields. The reaction proceeded efficiently under aerobic conditions by adding only a catalytic amount of BiI3, which was non-hygroscopic and less toxic, and both selanyl groups of the diselenide were transferred to the desired products.

Copper-Catalyzed Tandem Cyclization/Chalcogenation with Elemental S8/Se: Concise Synthesis of 3-(β-Hydroxychalcogen)benzofurans

A novel copper-catalyzed cyclization/chalcogenation of o-alkynylphenols with epoxides and elemental S8/Se was developed for the synthesis of a 3-chalcogen-benzofuran architecture in a domino process with no intermediate isolation or purification. Various sensitive functional groups were compatible at room temperature and furnished chalcogenation derivatives in moderate to good yields.

Bromothiolation of Arynes for the Synthesis of 2-Bromobenzenethiol Equivalents

A new method to synthesize o-bromobenzenethiol equivalents through aryne intermediates is disclosed. Various o-bromobenzenethiol equivalents are prepared by the bromothiolation of aryne intermediates with potassium xanthates. Aryl xanthates serve in the synthesis of diverse organosulfurs involving phenothiazines and thianthrenes by further transformations.

A Review on the Synthetic Methods towards Benzothienobenzothiophenes

Benzothienobenzothiophenes (BTBTs) are a class of heteroacenes for which two distinct isomers have been identified depending on the locations of the fused benzothiophene motifs. Benzothienobenzothiophenes represent a class of heteroacenes demonstrating remarkable electronic properties that make them prominent in the realm of organic semiconductors. The structure of BTBTs, incorporating two sulfur atoms, contributes to their unique electronic characteristics, including narrow bandgaps and effective charge transport pathways. These compounds have gained attention for their high charge carrier mobility, making them desirable candidates for application in organic field-effect transistors (OFETs) and other electronic devices. Researchers have explored various synthetic strategies to design and tailor the properties of BTBT derivatives, leading to advancements in the development of high-performance organic semiconductors. Various synthetic techniques for benzothienobenzothiophenes have been reported in the literature including multistep synthesis, tandem transformations, electrochemical synthesis, and annulations. This review investigates the generality of each synthetic methodology by highlighting its benefits and drawbacks, and it analyses all synthetic approaches described for the creation of the two isomers. For the advantage of the readers, we have delved upon every mechanism of the reactions that are known. Finally, we have also summarized the synthetic methodologies that are used for making benzothienobenzothiophene analogues for material applications.

NaOAc-Assisted Aerobic Oxidation Protocol for the Synthesis of Pentacoordinate Chalcogenyl Spirophosphoranes with P-Se/P-S Bonds under Open Air

The NaOAc-assisted aerobic oxidation reaction of pentacoordinate hydrospirophosphoranes and dichalcogenyl compounds with open air as a green oxidant has been developed under mild conditions. A series of novel pentacoordinate spirophosphoranes with P-Se/P-S bonds were synthesized in excellent yields. The reaction mechanism was determined by 31P nuclear magnetic resonance tracing experiments, high-resolution mass spectrometry tracing experiments, and X-ray diffraction analysis. The method features a broad substrate scope, good functional group tolerance, and a high degree of atomic utilization and is meaningful for the synthesis of bioactive chalcogenphosphate compounds with chalcogen and phosphorus moieties.

Recent advances in selective mono-/dichalcogenation and exclusive dichalcogenation of C(sp2)-H and C(sp3)-H bonds

Organochalcogen compounds are prevalent in numerous natural products, pharmaceuticals, agrochemicals, polymers, biological molecules and synthetic intermediates. Direct chalcogenation of C-H bonds has evolved as a step- and atom-economical method for the synthesis of chalcogen-bearing compounds. Nevertheless, direct C-H chalcogenation severely lags behind C-C, C-N and C-O bond formations. Moreover, compared with the C-H monochalcogenation, reports of selective mono-/dichalcogenation and exclusive dichalcogenation of C-H bonds are relatively scarce. The past decade has witnessed significant advancements in selective mono-/dichalcogenation and exclusive dichalcogenation of various C(sp2)-H and C(sp3)-H bonds via transition-metal-catalyzed/mediated, photocatalytic, electrochemical or metal-free approaches. In light of the significance of both mono- and dichalcogen-containing compounds in various fields of chemical science and the critical issue of chemoselectivity in organic synthesis, the present review systematically summarizes the advances in these research fields, with a special focus on elucidating scopes and mechanistic aspects. Moreover, the synthetic limitations, applications of some of these processes, the current challenges and our own perspectives on these highly active research fields are also discussed. Based on the substrate types and C-H bonds being chalcogenated, the present review is organized into four sections: (1) transition-metal-catalyzed/mediated chelation-assisted selective C-H mono-/dichalcogenation or exclusive dichalcogenation of (hetero)arenes; (2) directing group-free selective C-H mono-/dichalcogenation or exclusive dichalcogenation of electron-rich (hetero)arenes; (3) C(sp3)-H dichalcogenation; (4) dichalcogenation of both C(sp2)-H and C(sp3)-H bonds. We believe the present review will serve as an invaluable resource for future innovations and drug discovery.

Bidentate Ligand Driven Intramolecularly Te…O Bonded Organotellurium Cations from Synthesis, Stability to Catalysis

A new series of unsymmetrical phenyl tellurides derived from 2-N-(quinolin-8-yl) benzamide ligand has been synthesized in a practical manner by the copper-catalyzed method by using diaryl ditelluride and Mg as a reductant at room temperature. In order to augment the Lewis acidity of these newly formed unsymmetrical monotellurides, these have been transformed into corresponding unsymmetrical 2-N-(quinolin-8-yl)benzamide tellurium cations. Subsequently, these Lewis acidic tellurium cations were used as chalcogen bonding catalysts, enabling the synthesis of various substituted 1,2-dihydroquinolines by activating ketones with anilines under mild conditions. Moreover, the synthesized 2-N-(quinolin-8-yl)benzamide phenyl tellurium cation has also catalyzed the formation of β-amino alcohols in high regioselectivity by effectively activating epoxides at room temperature. Mechanistic insight by 1 H and 19 F NMR study, electrostatic surface potential (ESP map), control reaction in which tellurium cation reacted explosively with epoxide, suggested that the enhanced Lewis acidity of tellurium center seems responsible for efficient catalytic activities under mild conditions enabling β-amino alcohols with excellent regioselectivity and 1,2-dihydroquinolines with trifluoromethyl, nitro, and pyridylsubstitution, which were difficult to access.

Manganese-promoted reductive cross-coupling of disulfides with dialkyl carbonates

Manganese is a cheap and environmentally friendly metal on Earth. Herein, we report a manganese-promoted reductive cross-coupling using easily available and odorless disulfides as thiolating agents in an excellent 100% sulfur atom economy. The protocol featured a broad substrate scope, including various alkyl disulfides and excellent functional group compatibility, constructing diverse thioethers under simple conditions. Ultimately, thioethers can be prepared in gram-scale reactions and further transformed into structurally complex molecules.

Bulky, electron-rich, renewable: analogues of Beller's phosphine for cross-couplings

In recent years, considerable progress has been made in the conversion of biomass into renewable chemicals, yet the range of value-added products that can be formed from biomass remains relatively small. Herein, we demonstrate that molecules available from biomass serve as viable starting materials for the synthesis of phosphine ligands, which can be used in homogeneous catalysis. Specifically, we prepared renewable analogues of Beller's ligand (di(1-adamantyl)-n-butylphosphine, cataCXium® A), which is widely used in homogeneous catalysis. Our new renewable phosphine ligands facilitate Pd-catalysed Suzuki-Miyaura, Stille, and Buchwald-Hartwig coupling reactions with high yields, and our catalytic results can be rationalized based on the stereoelectronic properties of the ligands. The new phosphine ligands generate catalytic systems that can be applied for the late-stage functionalization of commercial drugs.

Palladium-Catalyzed Direct Selanylation of Chalcogenophenes and Arenes Assisted by 2-(Methylthio)amide

The direct and selective conversion of a C-H bond into a C-Se bond remains a significant challenge, which is even more intricate with substrates having an innate regioselectivity under several reaction conditions, such as chalcogenophenes. We overrode their selectivity toward selanylation using palladium, copper, and the 2-(methylthio)amide directing group. This chelation-assisted direct selanylation was also suitable for mono and double ortho functionalization of arenes. The mechanistic studies indicate high-valent Pd(IV) species in the catalytic cycle, a reversible C-H activation step, and Cu(II) as a sequestering agent for organoselenide byproducts.

N-Sulfenylsuccinimide/phthalimide: an alternative sulfenylating reagent in organic transformations

In the field of organosulfur chemistry, sulfenylating agents are an important key in C-S bond formation strategies. Among various organosulfur precursors, N-sulfenylsuccinimide/phthalimide derivatives have shown highly electrophilic reactivity for the asymmetric synthesis of many organic compounds. Hence, in this review article, we focus on the application of these alternative sulfenylating reagents in organic transformations.

Copper-promoted direct sulfenylation of C1-H bonds in 4-aryl pyrrolo[1,2-a]quinoxalines

Methods for direct functionalization of C(sp2)-H bonds in pyrrolo[1,2-a]quinoxalines have witnessed emerging development over the last decade. Herein we report a new tactic to afford a selective sulfenylation of 4-aryl pyrrolo[1,2-a]quinoxalines with diaryl disulfides. The reactions proceeded in the presence of a copper catalyst and potassium iodide promoter. Functionalities including nitro, ester, amide, methylthio, and halogen groups were all tolerated. Our method offers a convenient route to obtain highly substituted pyrrolo[1,2-a]quinoxalines-based thioethers in moderate to good yields.

Direct Electrooxidative Selenylation/Cyclization of Alkynes: Access to Functionalized Benzo[b]furans

A mild, practical, metal and oxidant-free methodology for the synthesis of various C-3 selenylated benzo[b]furan derivatives was developed through the intramolecular cyclization of alkynes promoted with diselenides via electrooxidation. A wide range of selenium-substituted benzo[b]furan derivatives were obtained in good to excellent yields with high regioselectivity under constant current in an undivided cell equipped with carbon and platinum plates as the anode and cathode, respectively. Moreover, the convergent approach exhibited good functional group tolerance and could be easily scaled up with good efficiency, providing rapid access to a diverse range of selenylated benzo[b]furans derivatives from simple, readily available starting materials.

Dual Ligand Enabled Nondirected C-H Chalcogenation of Arenes and Heteroarenes

Chalcogenide motifs are present as principal moieties in a vast array of natural products and complex molecules. Till date, the construction of these chalcogen motifs has been restricted to either the use of directing groups or the employment of a large excess of electronically activated arenes, typically employed as a cosolvent. Despite being highly effective, these methods have their own limitations in the step economy and the deployment of an excess amount of arenes. Herein, we report the evolution of a catalytic system employing arene-limited, nondirected thioarylation of arenes and heteroarenes using a complimentary dual-ligand approach. The reaction is controlled by a combination of steric and electronic factors, and the utilization of a suitable ligand enables the generation of products on a complimentary spectrum to that generated by classical methods. The combination of ligands remains imperative in the reaction protocol with theoretical calculations pointing towards a monoprotected amino acid ligand being crucial in the concerted metalation deprotonation (CMD) mechanism by a characteristic [5,6]-palladacyclic transition state, while the pyridine moiety assists in the active catalyst species formation and product release. Combined experimental and computational mechanistic investigations point toward the C-H activation step being both regio- and rate-determining. Interestingly, oxidative addition of the diphenyl disulfide substrate is found to be unlikely, and an alternative transmetalation-like mechanism involving the Pd-Ag heterometallic complex is proposed to be operative.

Modular synthesis of unsymmetrical [1]benzothieno[3,2-b][1]benzothiophene molecular semiconductors for organic transistors

A modular approach to underexplored, unsymmetrical [1]benzothieno[3,2-b][1]benzothiophene (BTBT) scaffolds delivers a library of BTBT materials from readily available coupling partners by combining a transition-metal free Pummerer CH-CH-type cross-coupling and a Newman-Kwart reaction. This effective approach to unsymmetrical BTBT materials has allowed their properties to be studied. In particular, tuning the functional groups on the BTBT scaffold allows the solid-state assembly and molecular orbital energy levels to be modulated. Investigation of the charge transport properties of BTBT-containing small-molecule:polymer blends revealed the importance of molecular ordering during phase segregation and matching the highest occupied molecular orbital energy level with that of the semiconducting polymer binder, polyindacenodithiophene-benzothiadiazole (PIDTBT). The hole mobilities extracted from transistors fabricated using blends of PIDTBT with phenyl or methoxy functionalized unsymmetrical BTBTs were double those measured for devices fabricated using pristine PIDTBT. This study underscores the value of the synthetic methodology in providing a platform from which to study structure-property relationships in an underrepresented family of unsymmetrical BTBT molecular semiconductors.

Chitosan-starch biopolymer modified kaolin supported Pd nanoparticles for the oxidative esterification of aryl aldehydes

A mild and efficient green protocol has been disclosed for selective oxidative esterification of various aldehydes over a novel Pd fabricated chitosan-starch polyplex encapsulated Kaolin (Kaolin@CS-starch-Pd) as a heterogeneous and reusable biocompatible nanocatalyst. Molecular oxygen was used as an oxidizing agent to generate water as the sole by-product. A wide variety of aldehydes was converted to their methyl esters in high yields. The process involved gentle reaction conditions to avoid any type of pre-activation. Structural features of the catalyst were determined through FT-IR, FE-SEM, TEM, EDX, elemental mapping, XRD and ICP-OES analyses. The material was found to be stable enough toward Pd leaching. Durability of Kaolin@CS-starch-Pd was further justified by retaining its catalytic activity through successful reusability for several times.

Elemental Sulfur-Promoted Benzoxazole/Benzothiazole Formation Using a C═C Double Bond as a One-Carbon Donator

An efficient method to assemble diverse benzoxazoles/benzothiazoles in good yields was developed via oxidative cyclization with 2-aminothiophenols or 2-iodoanilines as raw materials. In this protocol, elemental sulfur was used as the effective oxidant and C atoms on the C═C double bond were introduced as a one-carbon donator.

Electrochemical Radical Selenylation of Alkenes and Arenes via Se-Se Bond Activation

A novel electrochemical radical selenylation of alkenes and activated arenes without external oxidants is reported. The diselenide was fully transformed into Se-centered radicals through electrochemical Se-Se bond activation. Three-component radical carbonselenation was successfully realized using styrenes to trap the RSe radical. Besides, the direct coupling of RSe radicals with activated arenes was further developed. Using this atom-economic protocol, diversity of unsymmetric aryl-aryl, aryl-alkyl, and alkyl-alkyl selenoethers was obtained regioselectively, which has potential application in biological chemistry.

A review on the role of transition metals in selenylation reactions

Organoselenium chemistry has emerged as a distinctive area of research with tremendous utility in the synthesis of biologically and pharmaceutically active molecules. Significant synthetic approaches have been made for the construction of C-Se bonds which find use in other organic transformations. This review focuses on the versatility of transition metal-mediated selenylation reactions, providing insights into various synthetic pathways and mechanistic details. Further, this review aims to offer a broad perspective for designing efficient and novel catalysts to incorporate organoselenium moiety into the inert C-H bonds.

Progress and perspectives on directing group-assisted palladium-catalysed C-H functionalisation of amino acids and peptides

Peptide modifications can unlock a variety of compounds with structural diversity and abundant biological activity. In nature, peptide modifications, such as functionalisation at the side-chain position of amino acids, are performed using post-translational modification enzymes or incorporation of unnatural amino acids. However, accessing these modifications remains a challenge for organic chemists. During the past decades, selective C-H activation/functionalisation has attracted considerable attention in synthetic organic chemistry as a pathway to peptide modification. Various directing group strategies have been discovered that assist selective C-H activation. In particular, bidentate directing groups that enable tuneable and reversible coordination are now recognised as one of the most efficient methods for the site-selective C-H activation and functionalisation of numerous families of organic compounds. Synthetic peptide chemists have harnessed bidentate directing group strategies for selective functionalisation of the β- and γ-positions of amino acids. This method has been expanded and recognised as an effective device for the late stage macrocyclisation and total synthesis of complex peptide natural products. In this review, we discuss various β-, γ-, and δ-C(sp³)-H bond functionalisation reactions of amino acids for the formation of C-X bonds with the aid of directing groups and their application in late-stage macrocyclisation and the total synthesis of complex peptide natural products.

Copper-Catalyzed Cycloaddition of Heterobicyclic Alkenes with Diaryl Disulfides to Synthesize Dihydrobenzo[b]thiophene Derivatives

A novel copper-catalyzed cycloaddition of diaryl disulfides to heterobicyclic alkenes has been developed. The C-S and C-C bonds can be formed simultaneously on the C═C bond of the olefins via a single-step cycloaddition to afford a series of 2,3-dihydrobenzo[b]thiophene derivatives. This reaction exhibits excellent diastereoselectivity and relatively broad substrate scope. Various functional groups attached to the substrates are tolerated in this protocol to give the corresponding exo adducts in moderate yields.

C-H Activation: Toward Sustainability and Applications

Since the definition of the "12 Principles of Green Chemistry" more than 20 years ago, chemists have become increasingly mindful of the need to conserve natural resources and protect the environment through the judicious choice of synthetic routes and materials. The direct activation and functionalization of C-H bonds, bypassing intermediate functional group installation is, in abstracto, step and atom economic, but numerous factors still hinder the sustainability of large-scale applications. In this Outlook, we highlight the research areas seeking to overcome the sustainability challenges of C-H activation: the pursuit of abundant metal catalysts, the avoidance of static directing groups, the replacement of metal oxidants, and the introduction of bioderived solvents. We close by examining the progress made in the subfield of aryl C-H borylation from its origins, through highly efficient but precious Ir-based systems, to emerging 3d metal catalysts. The future growth of this field will depend on industrial uptake, and thus we urge researchers to strive toward sustainable C-H activation.

Visible-Light Mediated Diarylselenylative Cyclization of 1,6-Enynes

We herein described a selenylative cyclization reaction of enynes by the utilization of diselenides as radical sources. The visible-light irradiation of the reaction mixture enables the generation of the selenium atom radical to trigger the radical addition/cyclization/selenation sequences. Both terminal alkyne and internal alkyne derived 1,6-enynes were tested and suitable for the current synthetic protocol, delivering various kinds of selenium-containing cycles in good yields.

Dearomative 1,6-addition of P(O)–H to in situ formed p-QM-like ion pairs from 2-benzofuryl-ols to C3-phosphinoyl hydrobenzofurans

We report a dearomative C3-phosphorylation and a tandem C3-phosphorylation/aromatization of 2-benzofuryl-ols with P(O)–H species to afford C3-phosphinoyl hydrobenzofurans and benzofurans, respectively.

NaI/TBHP-promoted reaction of indole-2-thiones with arylsulfonyl hydrazides: construction of achiral axial 3,3′-biindole-2,2′-dibenzenesulfonothioate derivatives

A new method for the synthesis of achiral axial 3,3′-biindole-2,2′-dibenzenesulfonothioate derivatives from indole-2-thiones with arylsulfonyl hydrazides promoted by NaI/TBHP is disclosed.

Green strategies for transition metal-catalyzed C–H activation in molecular syntheses

Sustainable strategies for the activation of inert C–H bonds towards improved resource-economy.

Recent advances in the development of palladium nanocatalysts for sustainable organic transformations

In this review, we highlighted Pd nanocatalysts which have been used in the development of sustainable organic transformations including transfer hydrogenation, C–H bond activation, and some carbon–carbon couplings in the last five years.

Synthesis of 3-Selenylindoles through Organoselenium-Promoted Selenocyclization of 2-Vinylaniline

A novel metal-free one-pot protocol for the synthesis of potential biologically active molecules 3-selenylindoles via intramolecular cyclization/selenylation with simple 2-vinylaniline has been developed with moderate to good yield, thus representing it as a facile route to diverse substitution patterns around the indole core. The reaction proceeded smoothly with a broad substrate scope and excellent functional group tolerance. Moreover, the present synthetic route could be readily scaled up to gram quantity without difficulty. Mechanistic studies have revealed that in situ formed selenium electrophile species may be the key intermediate for the selenocyclization process.

N-Aminopyridinium Ylide-Directed, Copper-Promoted Chalcogenation of Arene C-H Bonds

N-Aminopyridinium ylide-directing group is employed for copper-promoted chalcogenation of sp² C-H bonds with aryl and alkyl disulfides as well as diphenyl diselenide. Reactions proceed in hexafluoroisopropanol (HFIP) solvent at elevated temperatures and are promoted by copper(II) acetate.