Highly biocompatible nanofibrous microspheres self-assembled from chitin in NaOH/urea aqueous solution as cell carriers

Chitin nanofibrils assisted 3D printing all-chitin hydrogels for wound dressing

The direct ink writing technique used in 3D printing technology is generally applied to designing biomedical hydrogels. Herein, we proposed a strategy for preparing all-chitin-based inks for wound dressing via direct ink writing technique. The β-chitin nanofibers (MACNF) with a high aspect ratio were applied as a nanofiller to modulate the rheological properties of the alkaline dissolved chitin solution. The printing fidelity significantly depends on the MACNF introduction amount to the composite ink. 5-10 wt% MACNF ratio showed superior printing performance. The printed scaffold showed a uniform micron-sized pore structure and a woven network of nanofibers. Due to the good biocompatibility of chitin and the stereoscopic spatial skeleton, this scaffold showed excellent performance as a wound dressing, which can promote cell proliferation, collagen deposition and the angiogenesis of wounds, demonstrating its potential in biomedical applications. This approach successfully balanced the chitinous printability and biofunctions.

Seafood waste derived Pt/Chitin nanocatalyst for efficient hydrogenation of nitroaromatic compounds

The fabrication of reliable, reusable and efficient catalyst is crucial for the conversion of nitroaromatic compounds into more chemically valuable amine-based molecules. In this study, a series of chitin supported platinum (Pt) catalysts with high catalytic activity, stability, and reusability were developed by using chitin derived from seafood waste as raw materials. The catalytic performance differences among these catalysts activated by different methods were investigated by hydrogenation of nitroaromatic compounds. The results showed that the multilayer hierarchical pore structure and abundance of hydroxyl and acetamido groups in chitin provided ample anchoring sites for Pt nanoparticles (NPs), ensuring the high dispersion of Pt NPs. Moreover, the interconnected channels between chitin nanofibrous microspheres facilitated rapid transport of reaction substrates. The best Pt/Chitin catalyst exhibited excellent catalytic activity and broad substrate applicability in hydrogenation of nitroaromatic compounds. Significantly, even after 20 runs, no discernible deactivation of activity was observed, demonstrating exceptional catalytic reusability. The application of seafood waste-based catalysts is conducive to the development of a green/sustainable society.

Drug Screening Using Normal Cell and Cancer Cell Mixture in an Automated 3D Cell Culture System

Three-dimensional (3D) cell culture creates a more physiologically relevant environment for enhanced drug screening capabilities using microcarriers. An automated 3D system that integrates robotic manipulators, liquid handling systems, sensors, and environment control systems has the capacity to handle multiple samples in parallel, perform repetitive tasks, and provide real-time monitoring and analysis. This chapter describes a potential 3D cell culture drug screening model by combining renal proximal tubule cells as a representative normal cell line with cancer cell lines. This combination is subjected to drug screening to evaluate the drug's efficacy in suppressing cancer cells while minimizing impact on normal cells with the added benefit of having the ability to separate the two cell types by magnetic isolation for high content screens including mass spectrometry-based proteomics. This study presents advancements in 3D cell culture techniques, emphasizing the importance of automation and the potential of microcarriers in drug screening and disease modeling.

Preparation of porous chitin beads from waste crayfish shell and application in the co-immobilization of PLP and its dependent enzyme

In this study, co-immobilization of PLP and its dependent enzyme were investigated using a novel type of porous chitin bead (PCB). Crayfish shell was used to prepare PCB via dissolution of it to form beads, followed by the removal of CaCO3 and protein in-situ. Scanning electron microscopy, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller method showed that the PCB had abundant porous structures with deacetylation degree of 33 % and the specific surface area of 35.87 m2/g. Then, the beads are used to co-immobilize pyridoxal 5-phosphate (PLP) and l-lysine decarboxylase fused with chitin-binding protein (SpLDC-ChBD). Laser scanning confocal microscopy revealed that the beads could co-immobilize PLP and SpLDC-ChBD successfully. In addition, a packed bed was also constructed using the PCB containing co-immobilized SpLDC-ChBD and PLP. The substrate conversion remained at 91.09 % after 48 h with 50 g/L l-lysine, which showed good continuous catalysis ability. This study provides a novel method for co-immobilization of enzyme and PLP, as well as develops a new application of waste crustacean shells.

Fabrication of Chitin microspheres supported sulfidated nano zerovalent iron and their performance in Cr (VI) removal

Sulfidated nanoscale zerovalent iron (S-nZVI) has been extensively studied for the reductive removal of Cr(VI), but its applicability is limited by agglomeration and unexpected efficiency reduction. In this study, chitin microsphere supported sulfidated nanoscale zero-valent iron (S-nZVI@Chi-M) was prepared by in-situ one-step reduction method and used to remove Cr(VI) from water. Compared to chitin and chitosan powder, Chi-M with nanofibrous structure and large surface area performed best in stabilizing S-nZVI with a Fe0 loading content of 3.01 wt%. The S-nZVI particles were homogeneously distributed on the surface of Chi-M, effectively avoiding agglomeration. Compared with bare nanoparticles and supported nZVI, S-nZVI@Chi-M showed significantly enhanced Cr(VI) removal capacity (924.5 mg Cr(VI) for per gram of effective Fe0). The influences of sulfidation degree, dosages, initial Cr(VI) concentration, pH, DO, humic acid and typical ions on Cr(VI) removal kinetics were further studied. S-nZVI@Chi-M could be recycled for at least 4 times with acceptable reactivity. The mechanism investigation results indicated that the Cr(VI) removal was a complex process of reduction, adsorption and co-precipitation under the synergistic effect of Chi-M and S-nZVI. This work provides new ideas for the continuous fabrication of highly reactive nanoparticles, hopefully expanding the application scope of biomass resources in pollution remediation.

Commercialization of Ionic Liquids in Pursuit of Green Chemistry: Must we Each Become an Entrepreneur?

There will be common challenges to scaling-up any ionic liquids separations technologies which require very large volumes of ionic liquid. Some of these challenges are illustrated in this personal account which chronicles the extraction of chitin from shrimp shell from discovery to current commercialization efforts. The road being taken from discovery in an academic laboratory, through attempts to navigate the scaling-up to commercial scale using the vehicle of a faculty startup company is rewarding, but fraught with roadblocks, detours, and unexpected challenges. The differences in 'technically feasible' and 'commercially viable' are not always evident from the beginning of the journey, however, one wonders what achievements we miss as a Society because it was assumed to not be commercially viable.

Fabrication of an exosome-loaded thermosensitive chitin-based hydrogel for dental pulp regeneration

Injective thermosensitive hydrogels are considered promising scaffolds to trigger dental pulp regeneration in devitalized human teeth. In this study, we developed a hydroxypropyl chitin (HPCH)/chitin whisker (CW) thermosensitive hydrogel with enhanced mechanical properties and biological activities. Exosomes can serve as biomimetic tools for tissue engineering, but the rapid clearance of unconjugated exosomes in vivo limits their therapeutic effects. To address this challenge, exosomes were isolated from human pulp stem cells (hDPSCs) and directly embedded into the HPCH/CW pre-gel to form an exosome-loaded hydrogel (HPCH/CW/Exo). The exosome-loaded thermosensitive hydrogel can be easily injected into an irregular endodontic space and gelated in situ. In vitro cell experiments proved that the delivery of exosomes significantly improved the ability of hydrogels to promote odontogenesis and angiogenesis. Meanwhile, in vivo animal experiments revealed the formation of new dental pulp-like tissues in an implanted tooth root model. Therefore, the proposed hydrogel provides a great potential alternative to traditional root canal therapy in dental clinics.

Biomimetic Natural Silk Nanofibrous Microspheres for Multifunctional Biomedical Applications

Silk nanofibrils (SNFs) extracted from natural silkworm silk represent a class of high-potential protein nanofiber material with unexplored biomedical applications. In this study, a SNF-assembled microsphere with extracellular matrix (ECM)-mimicking architecture and high specific surface area was developed. The SNFs were exfoliated from silkworm silks through an all-aqueous process and used as the building blocks for constructing the microspheres. Inspired by the structure and bioactive composition of ECM, hyaluronic acid (HA) was used as a bio-glue to regulate SNF assembly. With the assistance of HA, the SNF microspheres with stable fluffy nanofibrous structures were synthesized through electrospray. The biomimetic structure and nature derived composition endow the microspheres with excellent biocompatibility and enhanced osteogenic differentiation-inducing ability to mesenchymal stem cells. As proof of versatility, the SNF microspheres were further functionalized with other molecules and nanomaterials. Taking the advantages of the excellent blood compatibility and modifiability from the molecular level to the nanoscale of SNF microspheres, we demonstrated their versatile applications in protease detection and blood purification. On the basis of these results, we foresee that this natural silk-based nanofibrous microsphere may serve as a superior biomedical material for tissue engineering, early disease diagnosis, and therapeutic devices.

Fabrication of Biomass Derived Pt-Ni Bimetallic Catalyst and Its Selective Hydrogenation for 4-Nitrostyrene

The hydrogenation products of aromatic molecules with reducible groups (such as C=C, NO₂, C=O, etc.) are relatively critical intermediate compounds in fine chemicals, but how to accurately reduce only specific groups is still challenging. In this work, a bimetallic Pt-Ni/Chitin catalyst was prepared for the first time by using renewable biomass resource chitin as support. As the carrier, the chitin was constructed into porous nanofibrous microspheres through the sol-gel strategy, which was favorable for the adhesion of nano-metals and the exchange of reactive substances due to its large surface area, porous structure, and rich functional groups. Then the Pt-Ni/Chitin catalyst was applied to selective hydrogenation with the model substrate of 4-nitrostyrene. As the highly dispersed Pt-Ni NPs with abundant exposed active sites and the synergistic effect of bimetals, the Pt-Ni/Chitin catalyst could efficiently and selectively hydrogenate only NO₂ or C=C with yields of ~99% and TOF of 660 h^-1, as well as good stability. This utilization of biomass resources to build catalyst materials would be important for the green and sustainable chemistry.

Tuning liquid aggregation of zwitterionic chitin nanocrystals by graphene oxide planar catchers via electrostatic regulation

As important structural units, biomass nanomaterials have exhibited great potentials to construct high-performance macroscopic materials for broad applications by liquid assembly. However, the liquid aggregation of nanomaterials was less investigated. Here, we demonstrate that the one-dimensional (1D) zwitterionic chitin nanocrystals (ZChNCs) can be reversibly captured and released by two-dimensional (2D) planar catchers of graphene oxide (GO) sheets. The dominant electrostatic regulation strategy by pH variation drives that there are three reversible changes for the liquid aggregation of ZChNCs and GO, which were the isolated dispersion state (pH > 7), homogeneous hybridization state (7 ≥ pH ≥ 5), and partially stacked hybridization state (pH < 5), respectively. We found there are no sedimentation during the change of liquid aggregation with the higher absolute Zeta potentials (almost>30 mV). Moreover, the ZChNCs-GO nanohybrids have reached a maximum Zeta potential up to -80 mV, which can be explained by the ionization of excess carboxyl groups on the surface of ZChNCs. Besides, the electrostatic regulation endows the nanohybrids with rheological behavior, which is beneficial to the macro assembly of liquid nanomaterials. This work provides a new class of hybrid colloidal nanomaterials, opens the structural design dimension of macro assembly and holds great potentials in high-performance biodegradable material.

Functional microspheres for tissue regeneration

As a new type of injectable biomaterials, functional microspheres have attracted increasing attention in tissue regeneration because they possess some advantageous properties compared to other biomaterials, including hydrogels. A variety of bio-inspired microspheres with unique structures and properties have been developed as cellular carriers and drug delivery vehicles in recent years. In this review, we provide a comprehensive summary of the progress of functional and biodegradable microspheres that have been used for tissue regeneration over the last two decades. First, we briefly introduce the biomaterials and general methods for microsphere fabrication. Next, we focus on the newly developed technologies for preparing functional microspheres, including macroporous microspheres, nanofibrous microspheres, hollow microspheres, core-shell structured microspheres, and surface-modified functional microspheres. After that, we discuss the application of functional microspheres for tissue regeneration, specifically for bone, cartilage, dental, neural, cardiac, and skin tissue regeneration. Last, we present our perspectives and future directions of functional microspheres as injectable carriers for the future advancement of tissue regeneration.

An efficient method for chitin production from crab shells by a natural deep eutectic solvent

Crab shells are an important feedstock for chitin production. However, their highly compact structure significantly limits their use for the production of chitin under mild conditions. Here, a green and efficient approach using a natural deep eutectic solvent (NADES) to produce chitin from crab shells was developed. Its effectiveness in isolating chitin was investigated. The results showed that most proteins and minerals were removed from crab shells and the relative crystallinity of the isolated chitin reached 76%. The quality of the obtained chitin was comparable to chitin isolated by the acid-alkali method. This is the first report on a green method for efficient chitin production from crab shells. This study is expected to open new avenues for green and efficient production of chitin from crab shells.

A 4arm-PEG macromolecule crosslinked chitosan hydrogels as antibacterial wound dressing

In order to develop better wound dressings, a novel chitosan hydrogel (Cn-Nm gel) was designed and fabricated by using aldehyde-4-arm polyethylene glycol (4r-PEG-CHO) to crosslink the chitosan dissolved in alkaline solution, amino-4-arm polyethylene glycol (4r-PEG-NH₂) was chosen as the additive simultaneously. The special dissolution technique and macromolecular crosslinking structure endows the Cn-Nm gels with better performance than that of gels prepared by acid dissolving method with micromolecule crosslinker. First, Cn-Nm gels own strong toughness with 500 kPa tensile strength and 1000% elongation, about 400% swelling ratio and fast water absorption rate. Second, about 300 kPa adhesive strength and strippability between the gels and skin is achieved. More importantly, Cn-Nm gels show nearly 100% antibacterial rate towards Escherichia coli and Staphylococcus aureus. Excellent biocompatibility is also proved by the mouse fibroblasts tests. All of the performance makes this developed chitosan-based gel be the potential candidate as a wound dressing.

Biocompatible Composite Microspheres of Chitin/Ordered Mesoporous Carbon CMK3 for Bilirubin Adsorption and Cell Microcarrier Culture

Extra bilirubin in the blood can provoke serious illness in patients with severe liver disease. Hemoperfusion is an effective method to remove the extra bilirubin, but its application is limited by the low adsorption efficiency and poor biocompatibility of available adsorbent materials. In this study, chitin/ordered mesoporous carbon CMK3 (Ch/CMK3) microspheres were successfully prepared. Results of characterization experiments indicated that these composite microspheres possess a multilayered porous nanofibrous structure with an extremely large specific surface area (300.19 m² g^-1 ) and large pore size. Notably, the Ch/CMK3 microspheres demonstrated a high bilirubin adsorption capacity (228.19 mg g^-1 ) in phosphate buffer solution, and an outstanding bilirubin removal ratio (76.78%±4.40%) in the plasma of rabbits with hyperbilirubinemia without affecting the protein components. More importantly, the Ch/CMK3 microspheres showed no effect on other blood components, no cytotoxicity, and no systemic toxicity to mice. Cell coculture experiments revealed that the microspheres could provide a three-dimensional (3D) space to promote cell adhesion, proliferation, and nutrient exchange. These Ch/CMK3 microspheres featuring a strong ability for bilirubin adsorption and good biocompatibility could be a promising candidate in biomedical applications such as hemoperfusion, cell microcarrier, and 3D tissue engineering. This article is protected by copyright. All rights reserved.

Solvent Mediating the in Situ Self-Assembly of Polysaccharides for 3D Printing Biomimetic Tissue Scaffolds

Intensively studied 3D printing technology is frequently hindered by the effective printable ink preparation method. Herein, we propose an elegant and gentle solvent consumption strategy to slowly disrupt the thermodynamic stability of the biopolymer (polysaccharide: cellulose, chitin, and chitosan) solution to slightly induce the molecule chains to in situ self-assemble into nanostructures for regulating the rheological properties, eventually achieving the acceptable printability. The polysaccharides are dissolved in the alkali/urea solvent. The weak Lewis acid fumed silica (as solvent mediator) is used to (i) slowly and partially consume the alkali/urea solvent to induce the polysaccharide chains to self-assemble into nanofibers to form a percolating network in a limited scale without leading to gelation and (ii) act as the support to increase the solution modulus, for achieving superior printability and scaffold design flexibility. As a demonstration, the resulting polysaccharide scaffolds with biomimetic nanofibrous structures exhibit superior performances in both the cell-free and cell-loaded bone tissue engineering strategies, showing the potential in tissue engineering. Moreover, the fumed silica could be completely removed by alkali treatment without defecting the nanofibrous structure, showing the potential in various applications. We anticipate our solvent-mediated 3D printing ink preparation concept could be used to fabricate other polymeric facile inks and for widespread applications in diverse fields.

Multifunctional chitin-based barrier membrane with antibacterial and osteogenic activities for the treatment of periodontal disease

The guided tissue regeneration technique is an effective approach to repair periodontal defect. However, collagen barrier membranes used clinically lose stability easily, leading to soft tissue invasion, surgical site infection, and failure of osteogenesis. An ideal barrier membrane should possess proper antibacterial, osteoconductive activities, and favorable biodegradation. In this study, zinc oxide nanoparticles were homogeneously incorporated into the chitin hydrogel (ChT-1%ZnO) through one-step dissolution and regeneration method from alkaline/urea solution the first time. The remaining weights of ChT-1%ZnO in 150 μg/mL lysozyme solution was 52% after 5 weeks soaking. ChT-1%ZnO showed statistical antibacterial activities for P. gingivalis and S. aureus at 6 h, 12 h, and 24 h. Moreover, ChT-1%ZnO exhibits osteogenesis promotion in vitro, and it was further evaluated with rat periodontal defect model in vivo. The cemento-enamel junction value in ChT-1%ZnO group is 1.608 mm, presenting a statistical difference compared with no-membrane (1.825 mm) and ChT group (1.685 mm) after 8 weeks postoperatively.

Recyclable nitrogen-containing chitin-derived carbon microsphere as sorbent for neonicotinoid residues adsorption and analysis

Chitin-derived three-dimensional nanomaterials has tremendous potential in pesticide residue analysis as an attractive green substitute for toxic solvents. The work presented herein focuses on constructing the environmentally friendly nitrogen-containing chitin-derived carbon microspheres (N-CCMP) for the efficient adsorption of neonicotinoid pesticides (NPs) including acetamiprid, clothianidin, imidacloprid and thiamethoxam. The N-CCMP displayed hierarchical porous structure, uniform size distribution, and excellent specific surface area of 680.8 m²  g^-1. The N-CCMP with N-heterocyclic ring structure and surface oxygen functional groups exhibited good affinity to NPs, which was beneficial for the rapid adsorption. Then, the N-CCMP were utilized as sorbent in extraction of NP residues. Under the optimum conditions, the relative recoveries in water and juice sample were in the range of 85 %-116 % and 74 %-108 %, with relative standard deviations (RSDs) of 0.1 %∼5.2 % and 0.7 %∼5.2 %, respectively. The extraction performance of N-CCMP were still over 80 % after 5 times of reuse.

Biocompatible Chitin Hydrogel Incorporated with PEDOT Nanoparticles for Peripheral Nerve Repair

The nerve guidance conduit (NGC) is a promising clinical strategy for regenerating the critical-sized peripheral nerve injury. In this study, the polysaccharide chitin is used to fabricate the hydrogel film for inducing the impaired sciatic nerve regeneration through incorporating the conductive poly(3,4-ethylenedioxythiophene) nanoparticles (PEDOT NPs) and modifying with cell adhesive tetrapeptide Cys-Arg-Gly-Asp (CRGD) (ChT-PEDOT-p). The partial deacetylation process of chitin for exposing the amino groups is performed to (i) improve the electrostatic interaction between chitin and the negatively charged PEDOT for enhancing the composite hydrogel strength and (ii) offer the active sites for peptide modification. The as-prepared hydrogel remarkably promotes the in vitro RSC-96 cell adhesion and proliferation, as well as the Schwann cell activity-related gene S100, NF-200, and myelin basic protein (MBP) expression. Function of gastrocnemius muscle and thickness of myelinated axon in chitin/PEDOT groups are analogous to the autograft in 10 mm rat sciatic nerve defect. Immunofluorescence, immunohistochemistry, western blotting, and toluidine blue staining analyses on the regenerated sciatic nerve explain that the attachment and proliferation enhancement of Schwann cells and angiogenesis are the vital factors for the chitin/PEDOT composite to facilitate the nerve regeneration. This work provides an applicable chitin-based NGC material for accelerating the peripheral nerve restoration.

Pseudosolvent Intercalator of Chitin: Self-Exfoliating into Sub-1 nm Thick Nanofibrils for Multifunctional Chitinous Materials

Traditionally, energy-intensive and time-consuming postmechanical disintegration processes are inevitable in extracting biopolymer nanofibrils from natural materials and thereby hinder their practical applications. Herein, a new, convenient, scalable, and energy-efficient method for exfoliating nanofibrils (ChNFs) from various chitin sources via pseudosolvent-assisted intercalation process is proposed. These self-exfoliated ChNFs possess controllable thickness from 2.2 to 0.8 nm, average diameter of 4-5 nm, high aspect ratio up to 10³ and customized surface chemistries. Particularly, compared with elementary nanofibrils, ChNFs with few molecular layers thick exhibit greater potential to construct high-performance structural materials, e.g., ductile nanopapers with large elongation up to 70.1% and toughness as high as 30.2 MJ m^-3 , as well as soft hydrogels with typical nonlinear elasticity mimicking that of human-skin. The proposed self-exfoliation concept with unique advantages in the combination of high yield, energy efficiency, scalable productivity, less equipment requirements, and mild conditions opens up a door to extract biopolymer nanofibrils on an industrial scale. Moreover, the present modular ChNFs exfoliation will facilitate researchers to study the effect of thickness on the properties of nanofibrils and provide more insight into the structure-function relationship of biopolymer-based materials.

Effect of the Degree of Acetylation of Chitin Nonwoven Fabrics for Promoting Wound Healing

Chitin and chitosan have been extensively used as wound dressings because of their special functions to promote wound healing. However, there was little focus on the effects of the degree of acetylation (DA) on wound healing. In this work, the regenerated chitin nonwoven fabrics with DA values of 90, 71, 60, and 42% were prepared, and the morphology and physical performances of the fabrics were characterized. Moreover, the effects of DA of the chitin nonwoven fabrics on wound recovery were studied with a full-thickness skin defect model in rats. In vitro experiments indicated that the chitin nonwoven fabrics exhibited good biocompatibility and blood compatibility and a low blood-clotting index (BCI). In vivo experiments revealed that the chitin nonwoven fabrics could accelerate wound healing more effectively than gauze by promoting re-epithelialization and collagen deposition as well as by stimulating neovascularization. The results of the wound healing process showed that DA of the chitin nonwoven fabrics had a profound effect on promoting wound healing. Notably, the regenerated chitin nonwoven fabrics with 71% DA significantly improved the wound healing compared to the commercial wound dressing Algoplaque film. Therefore, the regenerated chitin nonwoven fabrics are promising candidates for wound healing.

Aqueous two-phase emulsions-templated tailorable porous alginate beads for 3D cell culture

A facile method was developed to produce porous alginate beads (PABs) with a controllable interconnected porous structure with aqueous two phase (ATPS) emulsions as template for 3D cell culture. ATPS emulsions, containing two biocompatible immiscible aqueous phases of cell/dextran (Dex) mixture and alginate (Alg)/polyethylene glycol (PEG) mixture and stabilized by mPEG-BSA particles, were introduced to form PABs. The pore size of PABs could be controlled by changing the emulsification frequency and the volume ratio between the ATPS emulsions and PEG-Alg solution. Moreover, cells could be directly encapsulated in the interconnected pores due to the excellent biocompatibility of ATPS. HeLa and human liver cancer cells encapsulated in the PABs present stronger cell activity (>95 %), proliferation, and enhanced functions compared with the cells encapsulated in general alginate beads (GABs). It is believed that the PABs is a promising microcarriers for 3D cell culture in vitro.

Chitin microsphere supported Pd nanoparticles as an efficient and recoverable catalyst for CO oxidation and Heck coupling reaction

Chitin derived from seafood wastes is a sustainable biopolymer, which can be used to constructe new materials to reduce the environmental pollution caused by non-biodegradable plastics. Herein, nanofibrous microspheres fabricated from chitin solution were used as carriers to construct three different chitin-supported Pd catalysts through diverse activation methods, subsequently revealed their differences in structure and performance. The palladium nanoparticles were firmly and highly dispersed on the microspheres due to the interconnected nanofibrous networks and functional groups of chitin, confirmed by various physicochemical characterizations. As the best candidate catalyst of Pd/chitin-Ar, in the CO oxidation reaction, which achieved 100% CO conversion with a lower Pd content, and exhibited excellent stability in 24-hours cycle reaction. Importantly, the catalyst was further applied in Heck coupling reaction, which also displayed competitive catalytic activity and stability (∼6runs, 94%). This utilizing of biomass resource to build catalyst materials would be important for the sustainable chemistry.

Towards Shell Biorefinery: Advances in Chemical-Catalytic Conversion of Chitin Biomass to Organonitrogen Chemicals

Chitin is the most abundant biopolymer after cellulose but it has not been fully utilized yet. Because of biologically fixed nitrogen, effective conversion of chitin or its derivatives to value-added organonitrogen compounds is a promising strategy to valorize chitin biomass, which has attracted increasing attention. Recently, a novel concept of shell biorefinery has been proposed on account of the huge potentials of chitin valorization. Until now, a number of valuable organonitrogen chemicals, including amino sugars, amino alcohols, amino acids, and heterocyclic compounds, have been produced from chitin biomass. In this Minireview, the focus is on the recent advances in the synthesis of organonitrogen chemicals employing chitin biomass as starting material via different catalytic processes. An outlook on the challenges and opportunities for more effective valorization of chitin will be given.

Insight into Morphology Change of Chitin Microspheres using Tertiary Butyl Alcohol/H2 O Binary System Freeze-Drying Method

The morphology of materials usually plays a significant role in their applications; the mechanical properties of the materials and characteristics such as specific surface area, surface energy, adsorbability, and wettability are dependent on the morphology. This study is focused on studying the effects of different tertiary butyl alcohol (TBA) aqueous solutions on the freeze-dried morphologies of chitin microspheres (CMs). By constructing a TBA/H₂ O phase diagram, the underlying mechanisms of morphology change are explored. It is found that by freeze drying the CMs with 20 and 100 wt% TBA, a fine nanofiber weaved pore structure can be obtained. Away from these two ratios, the nanofibers are oppressed by the large crystals formed during the precool process or bind together due to the existence of water in the secondary drying stage, poor morphology and pore characteristics appearing. Moreover, the 20 wt% TBA freeze-drying route is conducive to split the CMs and other polysaccharide (PS) microspheres. The split method is also helpful for exploring the internal structure of the microspheres. Therefore, this study makes it possible to simplify the morphology control of CMs, which helps in the characterization of porous PS-based microspheres.

Facile Construction of a Highly Dispersed Pt Nanocatalyst Anchored on Biomass-Derived N/O-Doped Carbon Nanofibrous Microspheres and Its Catalytic Hydrogenation

With the depletion of nonrenewable resources and the increasingly serious "white pollution" caused by nondegradable plastics, using renewable biomass resources such as chitin to fabricate materials is a green and sustainable pathway. Herein, for the first time, we used N/O-doped carbon nanofibrous microspheres (CNMs) derived from renewable chitin as carriers to successfully construct a highly dispersed platinum nanocatalyst via a facile way. Various physicochemical characterizations provided reliable evidence for the ultrafine and well-dispersed platinum nanoparticles with an average diameter of 2.3 nm. As the supporting framework, the CNM with interconnected nanofibrous networks and a large surface area facilitated the adhesion and dispersion of Pt particles. Meanwhile, the inherent N/O-containing functional groups and the defects in carbonized chitin could anchor the platinum tightly. The CNM/Pt catalyst was further examined for hydrogenation, and it exhibited promising catalytic activity and stability (∼5 runs, 91%) and a broad applicability. This utilization of biomass resources to build catalyst materials would be important for the green and sustainable chemistry.

Fabrication and evaluation of a chitin whisker/poly(L-lactide) composite scaffold by the direct trisolvent-ink writing method for bone tissue engineering

Although poly(l-lactide) (PLLA) based porous scaffolds have been widely fabricated through 3D printing, their poor mechanical properties and osteogenic activity still do not meet the needs of bone tissue repair. Herein, chitin whiskers (CHWs), having outstanding mechanical properties, excellent cell affinity, osteogenic activity, etc. were designed to introduce into the PLLA matrix. Moreover, a trisolvent system, including dichloromethane (DCM), 2-butoxyethanlol (2-Bu) and dibutyl phthalate (DBP), instead of a single solvent system of DCM was chosen to prepare CHW/PLLA (CP) composite inks. Then, the CP porous composite scaffolds were further fabricated via the direct ink writing method. The as-printed CP composite scaffolds have good 3D porous structures with a pore size of 400 ± 14 μm and a porosity of 80 ± 5%. Compared with the pure PLLA scaffold, the CP composite scaffolds showed significantly superior hydrophilicity and compression performance, and also were more conducive to cell adhesion, proliferation, and up-regulating alkaline phosphate activity and calcium deposition due to the presence of CHWs. Moreover, these promoting effects of CHWs are positively related to the content of the whiskers in the range of 0-20 wt%. However, as the content of CHWs further increased to 40 wt%, the compression performance, cell affinity and osteogenic activity of the corresponding 40%CP composite scaffold decreased, which may be attributed to the different microstructure of the scaffold from other composite scaffolds. Interestingly, compared with these scaffolds containing a lower mass content of CHWs, only the 40%CP composite scaffold exhibited significant anti-inflammatory properties. These robust CP composite scaffolds offer a new route for bone tissue engineering application.

Engineering Biomimetic Nanofiber Microspheres with Tailored Size, Predesigned Structure, and Desired Composition via Gas Bubble-Mediated Coaxial Electrospray

Minimally invasive therapies avoiding surgical complexities evoke great interest in developing injectable biomedical devices. Herein, a versatile approach is reported for engineering injectable and biomimetic nanofiber microspheres (NMs) with tunable sizes, predesigned structures, and desired compositions via gas bubble-mediated coaxial electrospraying. The sizes and structures of NMs are controlled by adjusting processing parameters including air flow rate, applied voltage, distance, and spinneret configuration in the coaxial setup. Importantly, unlike the self-assembly method, this technique can be used to fabricate NMs from any material feasible for electrospinning or other nanofiber fabrication techniques. To demonstrate the versatility, open porous NMs are successfully fabricated that consist of various short nanofibers made of poly(ε-caprolactone), poly(lactic-co-glycolic acid), gelatin, methacrylated gelatin, bioglass, and magneto-responsive polymer composites. Open porous NMs support human neural progenitor cell growth in 3D with a larger number and more neurites than nonporous NMs. Additionally, highly open porous NMs show faster cell infiltration and host tissue integration than nonporous NMs after subcutaneous injection to rats. Such a novel class of NMs holds great potential for many biomedical applications such as tissue filling, cell and drug delivery, and minimally invasive tissue regeneration.

Biopolymer-Based Microcarriers for Three-Dimensional Cell Culture and Engineered Tissue Formation

The concept of three-dimensional (3D) cell culture has been proposed to maintain cellular morphology and function as in vivo. Among different approaches for 3D cell culture, microcarrier technology provides a promising tool for cell adhesion, proliferation, and cellular interactions in 3D space mimicking the in vivo microenvironment. In particular, microcarriers based on biopolymers have been widely investigated because of their superior biocompatibility and biodegradability. Moreover, through bottom-up assembly, microcarriers have opened a bright door for fabricating engineered tissues, which is one of the cutting-edge topics in tissue engineering and regeneration medicine. This review takes an in-depth look into the recent advancements of microcarriers based on biopolymers-especially polysaccharides such as chitosan, chitin, cellulose, hyaluronic acid, alginate, and laminarin-for 3D cell culture and the fabrication of engineered tissues based on them. The current limitations and potential strategies were also discussed to shed some light on future directions.

Injectable microfluidic hydrogel microspheres based on chitosan and poly(ethylene glycol) diacrylate (PEGDA) as chondrocyte carriers

Chitosan/PEGDA double-network hydrogel microspheres prepared by microfluidic method as chondrocyte carriers for bottom-up cartilage tissue engineering.

Construction of cellulose nanofibers/quaternized chitin/organic rectorite composites and their application as wound dressing materials

Traumatic injury is a major cause of mortality, and poor wound healing affects millions of people. Thus, the development of effective wound dressings is essential for speeding up wound healing and decreasing mortality. In this study, a suspension of carboxylated brown algae cellulose nanofibers (BACNFs) with a high aspect ratio was freeze dried to prepare a sponge. The sponge showed high porosity and water absorption capacity; thus, it can absorb wound exudates when used as a wound dressing. In addition, quaternized β-chitin (QC) with antibacterial properties was intercalated into the interlayer space of the organic rectorite (OREC) via electrostatic interactions to obtain composite suspensions (QCRs) with improved antimicrobial activity compared to that of QC alone. Subsequently, the BACNF sponge was soaked in the QCR suspension to absorb QCRs via electrostatic interactions and hydrogen bonding from which cellulose nanofiber/quaternized chitin/organic rectorite composite (BACNF/QCR) sponges were constructed via freeze-drying. The in vivo animal tests demonstrated that the BACNF/QCR sponges rapidly induced hemostasis in a rat tail amputation test, making them superior to the traditional hemostatic materials. Furthermore, BACNFs/QCRs could substantially promote collagen synthesis and neovascularization, thereby accelerating wound healing 3 days earlier than gauze. This multi-functional biomedical material, fabricated using natural substances, shows great potential to be used for wound healing.

Tethering peptides onto biomimetic and injectable nanofiber microspheres to direct cellular response

Biomimetic and injectable nanofiber microspheres (NMs) could be ideal candidate for minimally invasive tissue repair. Herein, we report a facile approach to fabricate peptide-tethered NMs by combining electrospinning, electrospraying, and surface conjugation techniques. The composition and size of NMs can be tuned by varying the processing parameters during the fabrication. Further, bone morphogenic protein-2 (BMP-2) and vascular endothelial growth factor (VEGF) mimicking peptides have been successfully tethered onto poly(ε-caprolactone) (PCL):gelatin:(gelatin-methacryloyl) (GelMA)(1:0.5:0.5) NMs through photocrosslinking of the methacrylic group in GelMA and octenyl alanine (OCTAL) in the modified peptides. The BMP-2-OCTAL peptide-tethered NMs significantly promote osteogenic differentiation of bone marrow-derived stem cells (BMSCs). Moreover, human umbilical vein endothelial cells (HUVECs) seeded on VEGF mimicking peptide QK-OCTAL-tethered NMs significantly up-regulated vascular-specific proteins, leading to microvascularization. The strategy developed in this work holds great potential in developing a biomimetic and injectable carrier to efficiently direct cellular response (Osteogenesis and Angiogenesis) for tissue repair.

Carbohydrate-based nanomaterials for biomedical applications

Carbohydrates are abundant biomolecules, with a strong tendency to form supramolecular networks. A host of carbohydrate-based nanomaterials have been exploited for biomedical applications. These structures are based on simple mono- or disaccharides, as well as on complex, polymeric systems. Chemical modifications serve to tune the shapes and properties of these materials. In particular, carbohydrate-based nanoparticles and nanogels were used for drug delivery, imaging, and tissue engineering applications. Due to the reversible nature of the assembly, often based on a combination of hydrogen bonding and hydrophobic interactions, carbohydrate-based materials are valuable substrates for the creations of responsive systems. Herein, we review the current research on carbohydrate-based nanomaterials, with a particular focus on carbohydrate assembly. We will discuss how these systems are formed and how their properties are tuned. Particular emphasis will be placed on the use of carbohydrates for biomedical applications. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.