Alternating copolymerization by nitroxide-mediated polymerization and subsequent orthogonal functionalization

Sequence-Controlled Copolymerization of Structurally Well-Defined Multinuclear Zinc Acrylate Complexes and Styrene

The copolymerization of two or more monomers produces polymeric materials with unique properties that cannot be achieved with homopolymers. However, precise control over the polymer sequence remains challenging because the sequence is determined by the inherent reactivity of comonomers. Therefore, only limited methods using modified monomers or supramolecular interactions are reported. In this study, the sequence control of acrylate-styrene copolymerization using multinuclear zinc complexes is reported. The copolymerization of the zinc acrylate complex with a polymeric sheet-like structure and styrene in benzene affords a copolymer with a higher content of acrylate triad than calculated for the statistical random model, whereas tetranuclear zinc acrylate (TZA) affords a copolymer with fewer adjacent acrylate sequences. The copolymer with a higher content of acrylate triad exhibits a lower glass transition temperature because of the higher mobility of the longer polystyrene segments. These results highlight the promise of multinuclear zinc acrylate complexes as monomers for sequence-controlled copolymerization.

Umpolung Isomerization in Radical Copolymerization of Benzyl Vinyl Ether with Pentafluorophenylacrylate Leading to Degradable AAB Periodic Copolymers

This study revealed that benzyl vinyl ether (BnVE) shows a peculiar isomerization propagation in its radical copolymerization with an electron-deficient acrylate carrying a pentafluorophenyl group (PFA). The co-monomer pair inherently exhibits the cross-over propagation feature due to the large difference in the electron density. However, the radical species of PFA was found to undergo a backward isomerization to the penultimate BnVE pendant giving a benzyl radical species prior to propagation with BnVE. The isomerization brings a drastic change in the character of the growing radical species from electrophilic to nucleophilic, and thus the isomerized benzyl radial species propagates with PFA. Consequently, the two monomers were consumed in the order AAB (A: PFA; B: BnVE) and the unique periodic consumption was confirmed by the pseudo-reactivity ratios calculated by the penultimate model: r11 =0.174 and r21 =6600 for PFA (M1 ) with BnVE (M2 ). The pentafluorophenyl ester groups of the resulting copolymers are transformed into ester and amide groups by post-polymerization alcoholysis and aminolysis modifications. The unique isomerization in the AAB sequence allowed the periodic introduction of a benzyl ether structure in the backbone leading to efficient degradation under acid conditions.

A General Strategy To Access Alternating Styrene/Substituted Styrene Copolymers by Using a Traceless Controlling Group

We herein report a synthetic strategy for alternating copolymers of styrene and substituted styrenes by utilizing α-styryl boronate pinacol ester (StBpin) as the co-monomer through radical alternating copolymerization followed by protodeboronation. The excellent alternating polymerization behavior of the StBpin co-monomer in such a radical polymerization system is considered to be attributed to the steric hindrance and radical stabilization exerted by the Bpin group. This strategy is effective with a wide range of substituted styrene co-monomers regardless of the electronic nature of the substituents, and the protodeboronation of the alternating Bpin-containing polymers is highly efficient without polymer backbone alternation. RAFT living polymerization was also compatible with this approach. Thus, this strategy provides a way to build-up alternating copolymers consisting of similar styrene-type co-monomers, which has been inaccessible by conventional synthetic methods.

Stereospecific Radical Polymerization of a Side-Chain Transformable Bulky Acrylamide Monomer and Subsequent Post-Polymerization Modification for Syntheses of Isotactic Polyacrylate and Polyacrylamide

We report syntheses of isotactic polyacrylate and polyacrylamide via a stereospecific radical polymerization of a pendant-transformable monomer, acrylamide carrying isopropyl-substituted ureidosulfonamide (1), followed by post-polymerization modification (PPM). The study in the alcoholysis and aminolysis reactions of the model compound (2) for evaluation of the transformation ability of the electron-withdrawing pendant group on the repeating unit 1 revealed the following points: the pendant of the polymer became more reactive than that of monomer; the pendant was active enough for aminolysis reaction affording the amide compound quantitatively without additive/catalyst; the addition of a lithium triflate [Li(OTf)] and triethylamine (Et3 N) was effective as for promotion of the alcoholysis reaction. Poly(methyl acrylate) (PMA) was quantitatively obtained via the radical polymerization of 1 in the presence of Li(OTf) at 60 °C and the subsequent addition of methanol along with Et3 N. Thus-obtained PMA showed higher isotacticity [m=74 %] than that directly obtained via radical polymerization of methyl acrylate (MA) (m=51 %). The isotacticity was further increased as the temperature and monomer concentration were lower, and eventually m was increased up to 93 %. The aminolysis PPM after the iso-specific radical polymerization of 1 gave various isotactic polyacrylamides carrying different alkyl pendant groups, including poly(N-isopropylacrylamide) (PNIPAM).

Alternating Terpolymers through Cyclopolymerization and Subsequent Orthogonal Functionalization

A method for the synthesis of functionalized alternating copolymers by reversible deactivation radical polymerization was developed. Copolymerization by reversible addition-fragmentation chain transfer of hexenyl vinyl ether with a novel fluorinated divinyl monomer yields alternating cyclopolymers that can be chemoselectively modified by three distinct orthogonal functionalization reactions. Along the thiol-ene click reaction and amidation, a third functionalization was achieved via NHC-catalyzed transesterification or acylation resulting in a small library of ABC-type alternating terpolymers.

Self-Reporting Activated Ester-Amine Reaction for Enantioselective Multi-Channel Visual Detection of Chiral Amines

Chiral recognition is of importance not only in living systems but also in estimating the optical purity of enantiomeric drugs and fabricating advanced materials. Herein we report a novel self-reporting activated ester-amine reaction that can provide multi-channel visual detection of organic amines. It relies on the reaction extent dependent cis-transoid to cis-cisoid helical transition of the polyphenylacetylene backbone and the thus triggered fluorescence. Owing to the high selectivity, this visual process can recognize structurally diverse achiral amines and quantitatively check the impurity content. It also shows an outstanding enantioselectivity towards various chiral amines and can be applied to determine enantiomeric composition. The multiple responses in absorption, circular dichroism, photoluminescence, and circularly polarized luminescence make the helical transition of the polymer backbone a potential detection mode for high-throughput screening of chiral chemicals.

Orthogonal C-B Bond Transformation as an Approach for Versatile Synthesis of End-Functionalized Polymers

Conventionally inaccessible end-functionalized vinyl polymers were synthesized via orthogonal side-chain replacement for terminal and repeating units of poly(alkenyl boronate)s. A terminal-defined polymer of isopropenyl boronic acid pinacol ester (IPBpin) was synthesized via RAFT polymerization, and subsequent cobalt (Co)-catalyzed end olefination afforded the polymer carrying the C(sp²)-B bond at the terminal and the C(sp³)-B bond in repeating units. Herein, the terminal C(sp²)-B bond was selectively transformable via palladium (Pd)-catalyzed Suzuki-Miyaura cross coupling, and subsequent transformation of the repeating C(sp³)-B unit gave the poly(α-methyl vinyl alcohol) [poly(MVA)] bearing various functional groups at the terminal. The boron-based stepwise polymer reaction thus overcame the synthetic difficulty of the end-functionalized poly(MVA), which is ascribed to the poor polymerization ability of the corresponding acetate monomer, i.e., isopropenyl acetate.

Lewis Pair Catalyzed Regioselective Polymerization of (E,E)-Alkyl Sorbates for the Synthesis of (AB)n Sequenced Polymers

In this contribution, Lewis pairs (LPs) composed of N-heterocyclic olefins (NHOs) with different steric hindrance and nucleophilicity as Lewis bases (LBs) and Al-based compounds with comparable acidity but different steric hindrance as Lewis acids (LAs) were applied for 1,4-selective polymerization of (E,E)-methyl sorbate (MS) and (E,E)-ethyl sorbate (ES). The effects of steric hindrance, electron-donating ability, and acidity of LPs on MS and ES polymerization were systematically investigated. High catalytic activity and high initiation efficiency can be achieved, leading to the formation of PMS with 100 % 1,4-selectivity, tunable molecular weight (M_w up to 333 kg mol^-1 ), and narrow molecular weight distribution (MWD). Block copolymerization of ES and methyl methacrylate (MMA) was also realized. Meanwhile, this system can be applied to other homologous conjugated diene substrates. Furthermore, simple chemical reactions can efficiently convert PMS to different polymers with strict (AB)_n sequence structures, such as poly(sorbic acid), poly(propylene-alt-methyl acrylate), poly(propylene-alt-acrylic acid), poly(propylene-alt-allyl alcohol), and poly(ethylene-alt-2-butylene).

Sequential Post-Polymerization Modification of Aldehyde Polymers to Ketone and Oxime Polymers

A new sequential post-polymerization modification route has been developed for the synthesis of multifunctional polymers from a simple aldehyde polymer. In the first modification step, a template polymer derived from the radical polymerization of 4-vinyl benzaldehyde undergoes Rh-catalyzed hydroacylation with alkenes to furnish a group of ketone polymers. In the second modification step, Schiff base formation with alkoxy ammonium salts introduces a second group-an oxime functionality. Both the steps are highly efficient, introducing evenly distributed dual functionalities at the same position.

One-Pot Preparation of Methacrylate/Styrene Alternating Copolymers via Radical Copolymerization and Alcoholysis Modification: Sequence Impacts on Glass Transition Temperature

A series of methacrylate/styrene alternating copolymers were efficiently and systematically synthesized via alternating copolymerization of saccharin methacrylamide (1) with styrene and subsequent one-pot alcoholysis transformation with alcohols. The saccharin amide bond in 1 was stable enough that 1 was used as a bench-stable monomer, but the bond became reactive toward alcohols after the copolymerization. Thanks to the specific feature, the postpolymerization modification could be performed under mild conditions despite easy handling of the monomer. The quantitative transformation as well as the alternating sequence were certainly supported by ¹H NMR and MALDI-TOF-MS analyses. The alternating copolymers carrying relatively short alkyl pendants expressed lower glass transition temperatures than those of the statistical counterparts. Moreover, the alternating copolymerization was controlled via a RAFT polymerization system, affording a unique block copolymer composed of alternating copolymer segments.

Isotactic-Alternating, Heterotactic-Alternating, and ABAA-Type Sequence-Controlled Copolyester Syntheses via Highly Stereoselective and Regioselective Ring-Opening Polymerization of Cyclic Diesters

Synthesizing different types of sequence-controlled copolyesters can enrich the diversity of copolyesters and modify their properties more precisely, but it is still a challenge to synthesize a complicated sequence-controlled copolyester using different hydroxy acids in a living polymerization manner. In this work, a highly regioselective and stereoselective catalytic system was developed to synthesize biorenewable and biodegradable copolyesters of mandelic acid and lactic acid with isotactic-alternating, heterotactic-alternating, and ABAA-type precise and complicated sequences. Because of the regular incorporation of mandelic acid into polylactide, these sequence-controlled copolymers of mandelic acid and lactic acid show higher glass-transition temperatures than polylactide and a random copolymer. A stereocomplexation interaction between two opposite enantiomeric isotactic polymer chains was also discovered in the isotactic-alternating copolymer.

Unprecedented Sequence Control and Sequence-Driven Properties in a Series of AB-Alternating Copolymers Consisting Solely of Acrylamide Units

Herein, we report a method to synthesize a series of alternating copolymers that consist exclusively of acrylamide units. Crucial to realizing this polymer synthesis is the design of a divinyl monomer that contains acrylate and acrylamide moieties connected by two activated ester bonds. This design, which is based on the reactivity ratio of the embedded vinyl groups, allows a "selective" cyclopolymerization, wherein the intramolecular and intermolecular propagation are repeated alternately under dilute conditions. The addition of an amine to the resulting cyclopolymers afforded two different acryl amide units, i.e., an amine-substituted acryl amide and a 2-hydroxy-ethyl-substituted acryl amide in alternating sequence. Using this method, we could furnish ten types of alternating copolymers; some of these exhibit unique properties in solution and in the bulk, which are different from those of the corresponding random copolymers, and we attributed the differences to the alternating sequence.

Saccharin-pendant methacrylamide as a unique monomer in radical copolymerization: peculiar alternating copolymerization with styrene

A saccharin metharylamide was found to uniquely induce alternating copolymerization with styrene.

AB-alternating copolymers via chain-growth polymerization: synthesis, characterization, self-assembly, and functions

In this review, four topics on alternating copolymers synthesized via chain-growth polymerization are reviewed: (1) how to control the alternating sequence; (2) sequence analysis; (3) self-assembly; and (4) functions.

Orthogonally functionalizable polyacetals: a versatile platform for the design of acid sensitive amphiphilic copolymers

Dually functionalized amphiphilic copolyacetals as rational approach to the development of pH-responsive site-specific drug delivery systems.

Synthesis of strictly alternating copolymers by living carbanionic copolymerization of diphenylethylene with 1,3-pentadiene isomers

The living carbanionic alternating copolymerizations of 1,3-pentadiene isomers with DPE are reported, and yield well-defined alternating and highly stereoregular amorphous copolymers with controllable M_n, low Đ_M and predominantly trans-1,4 units.

RAFT Polymerization-Induced Self-Assembly as a Strategy for Versatile Synthesis of Semifluorinated Liquid-Crystalline Block Copolymer Nanoobjects

Polymerization-induced self-assembly is demonstrated as a powerful platform for the synthesis of block copolymers comprising a semifluorinated liquid-crystalline block. This strategy transforms the deficiency of polymer insolubility encountered in traditional homogeneous solution protocols to the strength for dispersion polymerization, thus, enabling direct access to polymorphic block copolymer nanoobjects at high concentrations and with quantitative conversions. The versatility of this strategy is highlighted by polymerizations in a wide selection of inexpensive solvents, from nonpolar to highly polar, to afford various block copolymers with distinct combinations of amorphous/crystalline or hydrophilic/hydrophobic/fluorinated segments. The utility of the nanoparticles is demonstrated as robust Pickering emulsifiers for commonly considered good solvents.

Orthogonal thiol-ene 'click' reactions: a powerful combination for fabrication and functionalization of patterned hydrogels

A combination of 'orthogonal' thiol-ene 'click' reactions is utilized for fabrication and functionalization of micro-patterned hydrogels. A furan-protected maleimide-containing parent copolymer is partially activated via the retro Diels-Alder reaction to obtain an 'orthogonally' functionalizable copolymer, where the different functional groups can be exploited for multi-functionalization or fabrication of functional hydrogels using combination of the nucleophilic and radical thiol-ene reactions.

Facile synthesis of advanced gradient polymers with sequence control using furan-protected maleimide as a comonomer

Diverse advanced gradient polymers, including simultaneous, hierarchical, di-blocky, symmetrical, and tri-blocky gradient polymers, were facilely fabricated by applying furan protected maleimide as a co-monomer.

Cyclopolymerization of Cleavable Acrylate-Vinyl Ether Divinyl Monomer via Nitroxide-Mediated Radical Polymerization: Copolymer beyond Reactivity Ratio

Cyclopolymerization of a divinyl monomer, where two different vinyl groups, that is, acrylate and vinyl ether, are connected via an ester bond, was performed under diluted condition with nitroxide-meditated radical polymerization (NMP). Both vinyl groups were consumed at almost same rate under suitable condition, although the inherent cross-propagation ability between the two vinyl groups are pretty low in radical copolymerization. Furthermore, the polymerization was controlled to some extent to give polymers of unimodal molecular weight distributions. The results obviously differed from copolymerization and homopolymerization with vinyl monomers that constitutes the divinyl monomer, 2-methoxyethyl acrylate and 2-acetoxyethyl vinyl ether. Structural analyses indicated formation of the cyclopolymer but the cyclo-efficiency was imperfect indicating that some units of olefinic dangling were incorporated. Eventually, the ester bonds of the cyclo units were cleaved to convert into the copolymer consisting of acrylic acid and 2-hydroxy ethyl vinyl ether and the composition ratio (DP_acryl/DP_VE) was 55:45. The copolymer showed higher glass transition temperature than that estimated from the composition ratio and T_g values of the homopolymers, which is likely due to the formation of quasi-cyclopolymer between carboxylic acid and hydroxy groups aligned in alternating fashion.

Synthesis and Functionalization of Periodic Copolymers

For the copolymerization of non-conjugated olefins and maleimides, it is known that under certain conditions periodic ABA monomer sequences are formed. In this work, such a copolymerization is used to create polymers which have defined (periodic) monomer sequences and can be functionalized after polymerization. The copolymerization of pentafluorophenol (PFP) active esters of 4-pentenoic acid and perillic acid with N-phenyl maleimide (PhMI) was studied in 1,2-dichloroethane (DCE) and 1,1,1,3,3,3-hexafluoro-2-phenyl-2-propanol (HFPP). In DCE and for the copolymerization of the PFP ester of 4-pentenoic acid and PhMI in HFPP, polymers were formed where the active esters were separated by at least one PhMI unit. The average number of separating PhMI units can be controlled by varying the feed ratio of the monomers. For the copolymerization of the PFP ester of perillic acid in HFPP, a preference for the formation of periodic copolymers was observed, where active esters were preferably separated from each other by a maximum of two PhMI moieties. Therefore, the copolymerization of said active ester containing monomers with PhMI provides a platform to create polymers in which reactive moieties are distributed along the polymer chain in different fashions. The active esters in the non-conjugated vinyl monomers could be used in a post-polymerization functionalization step to create functionalized polymers with defined monomer sequences in a modular way.

One-shot controlled/living copolymerization for various comonomer sequence distributions via dual radical and cationic active species from RAFT terminals

One-shot control of comonomer sequence distributions was demonstrated by dual radical and cationic copolymerization using RAFT mediator.

RAFT-mediated, visible light-initiated single unit monomer insertion and its application in the synthesis of sequence-defined polymers

In this communication, we report a catalyst-free methodology for single unit monomer insertion (SUMI) into reversible addition–fragmentation chain transfer (RAFT) agents initiated by low intensity visible light.

Coding and decoding libraries of sequence-defined functional copolymers synthesized via photoligation

Designing artificial macromolecules with absolute sequence order represents a considerable challenge. Here we report an advanced light-induced avenue to monodisperse sequence-defined functional linear macromolecules up to decamers via a unique photochemical approach. The versatility of the synthetic strategy-combining sequential and modular concepts-enables the synthesis of perfect macromolecules varying in chemical constitution and topology. Specific functions are placed at arbitrary positions along the chain via the successive addition of monomer units and blocks, leading to a library of functional homopolymers, alternating copolymers and block copolymers. The in-depth characterization of each sequence-defined chain confirms the precision nature of the macromolecules. Decoding of the functional information contained in the molecular structure is achieved via tandem mass spectrometry without recourse to their synthetic history, showing that the sequence information can be read. We submit that the presented photochemical strategy is a viable and advanced concept for coding individual monomer units along a macromolecular chain.

Nitroxide-Mediated Alternating Copolymerization of Vinyl Acetate with tert-Butyl-2-trifluoromethacrylate Using a SG1-Based Alkoxyamine

Unique alternating copolymers based on vinyl acetate (VAc) and tert-butyl-2-trifluoromethacrylate (MAF-TBE, a nonhomopolymerizable monomer under radical conditions) have been synthesized by nitroxide-mediated polymerization (NMP) using a SG1-based BlocBuilder alkoxyamine (MAMA-SG1) at moderate temperature (at 40 °C) in dimethyl sulfoxide. First-order kinetics and linear evolutions of the molecular weight (up to 17100 g mol^-1), maintaining low dispersity values (Đ ≤ 1.33), confirmed the controlled nature of the copolymerization. Interestingly, none of the starting monomers could undergo homopolymerization under the NMP condition initiated by MAMA-SG1. The resulting alternating copolymers were characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopies and size exclusion chromatography (SEC). The poly(VAc-alt-MAF-TBE) copolymer is amorphous and exhibited a single glass transition temperature of 59 °C. This is the first report of nitroxide-mediated (co)polymerization of VAc leading to well-defined copolymers with satisfactory yields. The results presented in this study established a new route via NMP toward the synthesis of strictly 1:1 alternating fluorocopolymers that can display diverse functionalities.

Preparation of Functional Alternating Polymer Brushes and Their Orthogonal Surface Modification through Microcontact Printing

This paper reports microcontact printing (μCP) to immobilize an alkoxyamine initiator (regulator) on glass and silicon substrates and subsequent surface-initiated alternating nitroxide-mediated copolymerization (siNMP) of hexafluoroisopropyl acrylate (HFIPA) and 7-octenylvinyl ether (OVE). The resulting patterned polymer brushes are analyzed by using atomic force microscopy (AFM). In addition, site-specific post-functionalization of the alternating polymer brushes by applying two orthogonal surface reactions is achieved with thiols and amines through μCP. The versatility of this post-polymerization modification approach is demonstrated by site-selective immobilization of small organic molecules, fluorophores, and ligands providing a binary bioactive surface. The successful side-by-side orthogonal immobilization is verified by using X-ray photoelectron spectroscopy (XPS) and fluorescence microscopy.

Biosynthetic Polymers as Functional Materials

The synthesis of functional polymers encoded with biomolecules has been an extensive area of research for decades. As such, a diverse toolbox of polymerization techniques and bioconjugation methods has been developed. The greatest impact of this work has been in biomedicine and biotechnology, where fully synthetic and naturally derived biomolecules are used cooperatively. Despite significant improvements in biocompatible and functionally diverse polymers, our success in the field is constrained by recognized limitations in polymer architecture control, structural dynamics, and biostabilization. This Perspective discusses the current status of functional biosynthetic polymers and highlights innovative strategies reported within the past five years that have made great strides in overcoming the aforementioned barriers.

Monomer sequence determination in the living anionic copolymerization of styrene and asymmetric bi-functionalized 1,1-diphenylethylene derivatives

In-chain functionalized polystyrenes with different sequential arrangements of functional groups are preparedvialiving anionic copolymerization. The sequence structures are determined by time sampling to establish the sequence-determination method.