Star/Linear Polymer Topology Transformation Facilitated by Mechanical Linking of Polymer Chains

High-Performance Dental Resins Containing a Starburst Monomer

Dimethacrylate-based chemistries feature extensively as resin monomers in dental resin-based materials due to their distinguished overall performance. However, challenges endure, encompassing inadequate mechanical attributes, volumetric shrinkage, and estrogenicity. Herein, we first synthesized a novel resin monomer, 9-armed starburst polyurethane acrylate (NPUA), via the grafting-onto approach. Compared to the primary commercial dental monomer 2,2-bis [p-(2'-hydroxy-3'-methacryloxypropoxy) phenyl] propane (Bis-GMA) (with a viscosity of 1,174 ± 3 Pa·s and volumetric shrinkage of 4.7% ± 0.1%), the NPUA monomer achieves the lower viscosity (158 ± 1 Pa·s), volumetric shrinkage (2.5% ± 0.1%), and cytotoxicity (P < 0.05). The NPUA-based resins exhibit the higher flexural strength, flexural modulus, hardness, and hydrophobicity and lower volumetric shrinkage, water absorption, and solubility compared to the Bis-GMA (70 wt%)/TEGDMA (30 wt%) resins. The NPUA-based composites exhibit significantly higher flexural strength, flexural modulus, and hardness and lower volumetric shrinkage (171.4 ± 3.0 MPa, 12.6 ± 0.5 GPa, 2.0 ± 0.2 GPa, and 3.4% ± 0.2%, respectively) compared to the Bis-GMA group (120.3 ± 4.7 MPa, 9.4 ± 0.7 GPa, 1.5 ± 0.1 GPa, and 4.7% ± 0.2%, respectively; P < 0.05). This work presents a viable avenue for augmenting the physicochemical attributes of dental resins.

Confinement effect of inter-arm interactions on glass formation in star polymer melts

We utilized molecular dynamic simulation to investigate the glass formation of star polymer melts in which the topological complexity is varied by altering the number of star arms (f). Emphasis was placed on how the "confinement effect" of repulsive inter-arm interactions within star polymers influences the thermodynamics and dynamics of star polymer melts. All the characteristic temperatures of glass formation were found to progressively increase with increasing f, but unexpectedly the fragility parameter KVFT was found to decrease with increasing f. As previously observed, stars having more than 5 or 6 arms adopt an average particle-like structure that is more contracted relative to the linear polymer size having the same mass and exhibit a strong tendency for intermolecular and intramolecular segregation. We systematically analyzed how varying f alters collective particle motion, dynamic heterogeneity, the decoupling exponent ζ phenomenologically linking the slow β- and α-relaxation times, and the thermodynamic scaling index γt. Consistent with our hypothesis that the segmental dynamics of many-arm star melts and thin supported polymer films should exhibit similar trends arising from the common feature of high local segmental confinement, we found that ζ increases considerably with increasing f, as found in supported polymer films with decreasing thickness. Furthermore, increasing f led to greatly enhanced elastic heterogeneity, and this phenomenon correlates strongly with changes in ζ and γt. Our observations should be helpful in building a more rational theoretical framework for understanding how molecular topology and geometrical confinement influence the dynamics of glass-forming materials more broadly.

Research on topological effect of natural small molecule and high-performance antibacterial air filtration application by electrospinning

The application of natural small molecule (NSM) in electrospun fibers is the key to achieving powerful functionality and sustainable development. However, the lack of understanding regarding the mechanism for loading NSM hinders the advancement of high-performance functional fibers. This work clarified the loading mechanism of NSM in polymer solution by comparing the different behaviors of curcumin (Cur), phloretin (PL), and tea polyphenols (TP) blended ethyl cellulose (EC) solutions. We found that TP may lead to the folding of polymer chains due to its strongest hydrogen bond, which in turn promoted the dispersion of TP along the polymer chain. Therefore, TP could achieve good electrospinnability at the highest loading capacity (16 times the Cur and 4 times the PL). Finally, chitosan was introduced into EC/TP to prepare tree-like nanofibers, achieving high-performance antibacterial air filtration. The filtration efficiency for 0.3 μm NaCl particles, pressure drop, and quality factor were 99.991 %, 85.5 Pa, and 0.1089 Pa-1, respectively. The bacteriostatic rates against Escherichia coli and Staphylococcus aureus were all 99.99 %. This work will promote the application of NSM and the developments of multifunctional electrospun fibers and high-performance air filters.

Topological transformation across different dimensions of supramolecular polymer via photo-isomerization

Herein, we report a novel topological transformable supramolecular polymer capable of converting its architecture from a two-dimensional to a one-dimensional structure. The transformative process is achieved by the precise control of the steric configuration of constituent monomers via photo-isomerization.

Synthesis of Supramolecular A8 Bn Miktoarm Star Copolymers by Host-Guest Complexation

We report a new synthetic method to construct supramolecular A₈ B_n (n=1, 2, 4) miktoarm star copolymers by host-guest complexation between a resorcinarene-based coordination capsule possessing eight polystyrene chains and 4,4-diacetoxybiphenyl guest molecules that retain one, two or four polymethyl acrylate chains. The formation of the supramolecular A₈ B_n (n=1, 2, 4) miktoarm star copolymers was confirmed by dynamic light scattering (DLS), size-exclusion chromatography (SEC), and diffusion-ordered NMR spectroscopy (DOSY). Differential scanning calorimetry (DSC) measurements revealed that the miktoarm copolymers were phase-separated in the bulk. The micro-Brownian motion of the A₈ B₄ structure was markedly enhanced in the bulk due to a weak segregation interaction between the immiscible arms.

Rational design of a multi-in-one heterofunctional agent for versatile topological transformation of multisite multisegmented polystyrenes

A “seven-in-one” initiating, coupling and stimuli-labile agent is designed to achieve topological transformations with reduced, similar and enhanced molar masses.

Topology-transformable block copolymers based on a rotaxane structure: change in bulk properties with same composition

The topology of polymers affects their characteristic features, i.e., their microscopic structure and macroscopic properties. However, the topology of a polymer is usually fixed during the construction of the polymer chain and cannot be transformed after its determination during the synthesis. In this study, topology-transformable block copolymers that are connected via rotaxane linkages are introduced. We will present systems in which the topology transformation of block copolymers changes their 1) microphase-separated structures and 2) macroscopic mechanical properties. The combination of a rotaxane structure at the junction point and block copolymers that spontaneously form microphase-separated structures in the bulk provides access to systems that cannot be attained using conventional covalent bonds.

Preparation of hetero-armed POSS-cored star-shaped PCL-PLA/PLA composites and effect of different diisocyanates as compatibilizer

Eight-armed A₄B₄-type hetero-arm star-shaped PCL-PLA polymers ((PCL)₄-POSS-(PLA)₄, SPLA30) with POSS core were successfully prepared via combination of the "arm-first" approach utilizing ring-opening polymerization (ROP) and click chemistry techniques. Firstly, alkyne-functional PLA and PCL polymers having arms with 30 repeating units were synthesized via ROP with utilizing propargyl alcohol as initiator and stannous octoate (Sn(Oct)₂) as catalyst. Then, the obtained hetero-armed star-shaped polymers were prepared by Cu(I)-catalyzed alkyne-azide cycloaddition (CuAAC) click reaction between alkyne functional polymers (1:1 PCL:PLA) and azido functional polyhedral oligomeric silsesquoxane (POSS-(N₃)₈) molecules. Finally, these obtained star-shaped SPLA30 was blended with neat PLA at different PLA/SPLA30 ratios (95/5 and 90/10 wt%) via melt blending by utilizing micro-compounder (a lab-scale) to enhance thermal, morphological, and mechanical properties of neat PLA. Also, different diisocyanates (1,4-phenylene diisocyanate (PDI), isophorone diisocyanate (IPDI), methylene diphenyl diisocyanate (MDI), and toluene 2,4-diisocyanate (TDI)) at constant ratio (1 wt%) were used as a chain extender bonding terminal group of polymers. It was found that addition of SPLA30 and SPLA30+ diisocyanates provided improvements in mechanical properties (especially in elongation at break and impact strength) of neat PLA. When the thermal properties were examined, it was seen that the decomposition temperatures of the blends decreased significantly compared to neat PLA and that there was a significant increment in the T_g and T_m values. In addition, it has been found that especially the diisocyanates added to provide good interfacial adhesion with polymer blends and show a homogeneous distribution on the surface.

Reversible cyclic-linear topological transformation using a long-range rotaxane switch

A reversible linear-cyclic topological transformation of polymers facilitated by a long-range rotaxane switch.

Switchable Polymer Materials Controlled by Rotaxane Macromolecular Switches

The synthesis and dynamic nature of macromolecular systems controlled by rotaxane macromolecular switches are introduced to discuss the significance of rotaxane linking of polymer chains and its topological switching. Macromolecular switches have been synthesized from macromolecular [2]rotaxanes (M2Rs) using sec-ammonium salt/crown ether couples. The successful synthesis of M2Rs possessing a single polymer axle and one crown ether wheel, constituting a key component of the macromolecular switch, has allowed us to develop various unique applications such as the development of topology-transformable polymers. Polymer topological transformations (e.g., linear-star and linear-cyclic) are achieved using rotaxane-linked polymers and rotaxane macromolecular switches. The pronounced dynamic nature of these polymer systems is sufficiently interesting to design sophisticated stimuli-responsive molecules, polymers, and materials.

Expedient Synthesis of Heterobifunctional Triarylmethane Stoppers for Macromolecular Rotaxanes

Increasingly complex rotaxane-based molecular devices are interfaced with polymers and surfaces, but suitable bifunctional stoppering groups are lacking. Here, we report a two-step, high-yielding synthesis toward a new class of heterobifunctional triarylmethane stoppers. They possess hydroxyl and ester groups for further functionalization as well as halogen substituents conferring a diagnostic spectroscopic signature. Their utility was demonstrated with the synthesis of a chain-centered macromolecular rotaxane. This new stopper architecture should prove useful to connect rotaxanes with polymers and surfaces for applications in polymer mechanochemistry, single-molecule force spectroscopy, smart materials, and molecular machines.

Supramolecular Competitive Host-Guest Interaction Induced Reversible Macromolecular Metamorphosis

In this work, a rational strategy of competitive host-guest complexation between dioxynaphthalene (Naph) and tetrathiafulvalene (TTF) subunits as guests and cyclophane cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺ ) module as host is exploited to modify the macromolecular architecture, so-called supramolecular metamorphosis, in aqueous media. The architectures of the polymers can be reversibly transformed from a linear diblock copolymer AB to a linear AC block copolymer or from a linear block copolymer to a comb copolymer by redox switching. Interestingly, as TTF- and Naph-based complexes feature different characteristic colors, it offers a great opportunity to directly observe nanoscaled macromolecular metamorphosis of materials with the naked eye.

Poly(propylene fumarate) stars, using architecture to reduce the viscosity of 3D printable resins

Additive manufacturing is changing tissue engineering by offering pathways to otherwise unattainable, highly complex scaffold morphologies.

[3]rotaxanes composed of two dibenzo-24-crown-8 ether wheels and an azamacrocyclic complex

The azamacrocyclic complex was used as a platform for the construction of [3]rotaxanes containing two DB24C8 macrocycles per molecule. The complex unit incorporates two electron deficient π-bond systems and two N-H hydrogen bond donating groups which facilitated the formation of a 1 : 2 interlocked structure. Synthesis and properties of such compounds are presented. Structures of the obtained compounds were confirmed by NMR spectroscopy, ESI mass spectrometry, elemental analysis and single crystal X-ray diffraction. Both [3]rotaxanes containing two DB24C8 macrocycles per molecule crystallise in P1[combining macron] and P21/n space groups. They have different counterions (PF6- and Cl- anions, respectively) and mostly disordered solvent molecules such as water, methanol and acetone. Both [3]rotaxanes have a flexible axle in which the Cl- salt takes the shape closer to the "S"-letter, while in the PF6- case the axle is more linear. The shape results from respective packing and intra-, and intermolecular interactions among the moieties in the rotaxane and the crystal lattice.

Viologen-Based Rotaxanes from Dibenzo-30-crown-10

Three [2]rotaxanes (4, 7, and 12) and one [3]rotaxane (8) were synthesized based on the dibenzo-30-crown-10/viologen binding motif. To the best of our knowledge, these are the first rotaxanes formed from dibenzo-30-crown-10 and viologens. The rotaxanes were all characterized by ¹H NMR, ¹³C NMR, and HRMS. An X-ray crystal structure of one of the [2]rotaxanes (7) was obtained. This work demonstrates for the first time that dibenzo-30-crown-10 does form pseudorotaxane complexes with viologens in solution.

Which One is Bulkier: The 3,5-Dimethylphenyl or the 2,6-Dimethylphenyl Group? Development of Size-Complementary Molecular and Macromolecular [2]Rotaxanes

We developed novel size-complementary molecular and macromolecular rotaxanes using a 2,6-dimethylphenyl terminal group as the axle-end-cap group in dibenzo-24-crown-8-ether (DB24C8)-based rotaxanes, where the 2,6-dimethylphenyl group was found to be less bulky than the 3,5-dimethylphenyl group. A series of molecular and macromolecular [2]rotaxanes that bear a 2,6-dimethylphenyl group as the axle-end-cap were synthesized using unsubstituted and fluorine-substituted DB24C8. Base-induced decomposition into their constituent components confirmed the occurrence of deslipping, which supports the size-complementarity of these rotaxanes. The deslipping rate was independent of the axle length but dependent on the DB24C8 substituents. A kinetic study indicated the rate-determining step was that in which the wheel is getting over the end-cap group, and deslipping proceeded via a hopping-over mechanism. Finally, the present deslipping behavior was applied to a stimulus-degradable polymer as an example for the versatile utility of this concept in the context of stimulus-responsive materials.

Photo-triggered solvent-free metamorphosis of polymeric materials

Liquefaction and solidification of materials are the most fundamental changes observed during thermal phase transitions, yet the design of organic and polymeric soft materials showing isothermal reversible liquid-nonliquid conversion remains challenging. Here, we demonstrate that solvent-free repeatable molecular architectural transformation between liquid-star and nonliquid-network polymers that relies on cleavage and reformation of a covalent bond in hexaarylbiimidazole. Liquid four-armed star-shaped poly(n-butyl acrylate) and poly(dimethyl siloxane) with 2,4,5-triphenylimidazole end groups were first synthesized. Subsequent oxidation of the 2,4,5-triphenylimidazoles into 2,4,5-triphenylimidazoryl radicals and their coupling with these liquid star polymers to form hexaarylbiimidazoles afforded the corresponding nonliquid network polymers. The resulting nonliquid network polymers liquefied upon UV irradiation and produced liquid star-shaped polymers with 2,4,5-triphenylimidazoryl radical end groups that reverted to nonliquid network polymers again by recoupling of the generated 2,4,5-triphenylimidazoryl radicals immediately after terminating UV irradiation.The design of organic and polymeric soft materials showing isothermal reversible liquid-nonliquid conversion is challenging. Here, the authors show solvent-free repeatable molecular architectural transformation between liquid-star and non-liquid-network polymers by the cleavage and reformation of covalent bonds in the polymer chain.

Influence of a Single Catenane on the Solid-State Properties of Mechanically Linked Polymers

We report on mechanically linked polymers containing a single catenane in the middle of the chain. These polymers were synthesized by a simple procedure consisting in "clicking" polymer chains onto a functionalized palladium-templated [2]catenane, allowing the preparation of a variety of mechanically linked polymers. The flexibility of the catenane junction was modulated by removing the Pd ion from the catenane to unlock the macrocycles and increase their mobility. We show that this mobility change has a strong impact on the solid-state properties of the polymers. This is illustrated by studying the glass transition temperature of polystyrene-based polymers and the crystallization behavior of poly(ethylene oxide)-based polymers. Our study proves that a change of flexibility of a single catenane inserted into a polymer chain drastically influences the polymer behavior in the solid state.

Iterative Synthesis of Oligo[n]rotaxanes in Excellent Yield

We present an operationally simple iterative coupling strategy for the synthesis of oligomeric homo- and hetero[n]rotaxanes with precise control over the position of each macrocycle. The exceptional yield of the AT-CuAAC reaction, combined with optimized conditions that allow the rapid synthesis of the target oligomers, opens the door to the study of precision-engineered oligomeric interlocked molecules.

Supramolecular Copolymer Constructed by Hierarchical Self-Assembly of Orthogonal Host-Guest, H-Bonding, and Coordination Interactions

Supramolecular copolymers with complex architectures and emergent functions constitute a class of challenging but enticing synthetic targets in polymer science. Individual building blocks can be tailored to endow a resulting supramolecular copolymer with increased structural and functional complexity. Herein, we describe the construction of a linear supramolecular copolymer comprising mechanically interlocked segments with hydrogen-bonding metallorhomboidal units. Specifically, a hierarchical supramolecular polymerization of a crown ether-based [2]rotaxane and a discrete organoplatinum(II) metallacycle driven by 2-ureido-4-pyrimidinone (UPy) quadruple hydrogen bonding provides the impetus for its formation. This system demonstrates enhanced structural complexity accessed by the unification of orthogonal noncovalent interactions: metal coordination, host-guest chemistry, and multiple hydrogen bonding interfaces.

Synthesis and Star/Linear Topology Transformation of a Mechanically Linked ABC Terpolymer

The synthesis of an ABC star terpolymer containing one polymer chain connected mechanically through a rotaxane linkage and its topology transformation to a linear structure are reported. Pseudo[2]rotaxane, which was designed as the key trifunctional species for the star polymer synthesis, comprised a sec-ammonium axle with ethynyl and hydroxy groups and a crown ether wheel with a trithiocarbonate group. Stepwise polymer connections to the pseudo[2]rotaxane using the three groups afforded a rotaxane-linked ABC star terpolymer. The topology transformation from star to linear by the removal of the attractive interaction between the axle and wheel components yielded a linear ABC terpolymer via the wheel shifting to the axle end. The spectroscopic and solution property changes clearly indicated the occurrence of the polymer topology change.

Catenane-based mechanically-linked block copolymers

An original strategy for the synthesis of diblock copolymers where the blocks are linked by a catenane junction is described. Starting from a functionalized catenane precursor, our strategy enables the preparation of a variety of copolymers by different techniques such as ROP, ATRP and CuAAC click reaction.

Sensitive Structural Control of Macrocycle Threading by a Fluorescent Squaraine Dye Flanked by Polymer Chains

A macrocyclic tetralactam is threaded by a complementary squaraine dye that is flanked by two polyethylene glycol chains to produce a pseudorotaxane complex with favorable near-infrared fluorescence properties. The association thermodynamics and kinetics were measured for a homologous series of squaraines with different N-alkyl substituents at both ends of the dye. The results show that subtle changes in substituent steric size have profound effects on threading kinetics without greatly altering the very high association constant.