Isomerization of Olefins Triggered by Rhodium-Catalyzed C-H Bond Activation: Control of Endocyclic β-Hydrogen Elimination

Design of MMP-1 inhibitors via SAR transfer and experimental validation

New matrix metalloproteinase 1 (MMP-1) inhibitors were predicted using the structure-activity relationship (SAR) transfer method based on a series of analogues of kinesin-like protein 11 (KIF11) inhibitors. Compounds 5-7 predicted to be highly potent against MMP-1 were synthesized and tested for MMP-1 inhibitory activity. Among these, compound 6 having a Cl substituent at the R¹ site was found to possess ca. 3.5 times higher inhibitory activity against MMP-1 than the previously reported compound 4. The observed potency was consistent with the presence of an SAR transfer event between analogous MMP-1 and KIF11 inhibitors. Pharmacophore fitting revealed that the higher inhibitory activity of compound 6 compared to compound 4 against MMP-1 might be due to a halogen bond interaction between the Cl substituent of compound 6 and residue ARG214 of MMP-1.

Heterogeneous Isomerization for Stereoselective Alkyne Hydrogenation to trans-Alkene Mediated by Frustrated Hydrogen Atoms

Stereoselective production of alkenes from the alkyne hydrogenation plays a crucial role in the chemical industry. However, for heterogeneous metal catalysts, the olefins in cis-configuration are usually dominant in the products due to the most important and common Horiuti-Polanyi mechanism involved over the metal surface. In this work, through combined theoretical and experimental investigations, we demonstrate a novel isomerization mechanism mediated by the frustrated hydrogen atoms via the H₂ dissociation at the defect on solid surface, which can lead to the switch in selectivity from the cis-configuration to trans-configuration without overhydrogenation. The defective Rh₂S₃ with exposing facet of (110) exhibits outstanding performance as a heterogeneous metal catalyst for stereoselective production of trans-olefins. With the frustrated hydrogen atoms at spatially separated high-valence Rh sites, the isolated hydrogen mediated cis-to-trans isomerization of olefins can be effectively conducted and the overhydrogenation can be completely inhibited. Furthermore, the bifunctional Rh-S/Pd nanosheets have been synthesized through the surface modification of Pd nanosheets with rhodium and sulfide. With the selective semihydrogenation of alkynes into cis-olefins catalyzed by the small surface PdS_x ensembles, the bifunctional Rh-S/Pd nanosheets exhibit excellent activity and stereoselectivity in the one-pot alkyne hydrogenation into trans-olefin, which surpasses the most reported homogeneous and heterogeneous catalysts.

Teaching Aldehydes New Tricks Using Rhodium- and Cobalt-Hydride Catalysis

By using transition metal catalysts, chemists have altered the "logic of chemical synthesis" by enabling the functionalization of carbon-hydrogen bonds, which have traditionally been considered inert. Within this framework, our laboratory has been fascinated by the potential for aldehyde C-H bond activation. Our approach focused on generating acyl-metal-hydrides by oxidative addition of the formyl C-H bond, which is an elementary step first validated by Tsuji in 1965. In this Account, we review our efforts to overcome limitations in hydroacylation. Initial studies resulted in new variants of hydroacylation and ultimately spurred the development of related transformations (e.g., carboacylation, cycloisomerization, and transfer hydroformylation).Sakai and co-workers demonstrated the first hydroacylation of olefins when they reported that 4-pentenals cyclized to cyclopentanones, using stoichiometric amounts of Wilkinson's catalyst. This discovery sparked significant interest in hydroacylation, especially for the enantioselective and catalytic construction of cyclopentanones. Our research focused on expanding the asymmetric variants to access medium-sized rings (e.g., seven- and eight-membered rings). In addition, we achieved selective intermolecular couplings by incorporating directing groups onto the olefin partner. Along the way, we identified Rh and Co catalysts that transform dienyl aldehydes into a variety of unique carbocycles, such as cyclopentanones, bicyclic ketones, cyclohexenyl aldehydes, and cyclobutanones. Building on the insights gained from olefin hydroacylation, we demonstrated the first highly enantioselective hydroacylation of carbonyls. For example, we demonstrated that ketoaldehydes can cyclize to form lactones with high regio- and enantioselectivity. Following these reports, we reported the first intermolecular example that occurs with high stereocontrol. Ketoamides undergo intermolecular carbonyl hydroacylation to furnish α-acyloxyamides that contain a depsipeptide linkage.Finally, we describe how the key acyl-metal-hydride species can be diverted to achieve a C-C bond-cleaving process. Transfer hydroformylation enables the preparation of olefins from aldehydes by a dehomologation mechanism. Release of ring strain in the olefin acceptor offers a driving force for the isodesmic transfer of CO and H₂. Mechanistic studies suggest that the counterion serves as a proton-shuttle to enable transfer hydroformylation. Collectively, our studies showcase how transition metal catalysis can transform a common functional group, in this case aldehydes, into structurally distinct motifs. Fine-tuning the coordination sphere of an acyl-metal-hydride species can promote C-C and C-O bond-forming reactions, as well as C-C bond-cleaving processes.

A family of rhodium(i) NHC chelates featuring O-containing tethers for catalytic tandem alkene isomerization-hydrosilylation

The rhodium complex Rh(HL)(COD)Cl, 1, L being a functionalized N-heterocyclic carbene (NHC) ligand with an oxygen-containing pendant arm, has been used as the entry point to synthesize a series of neutral and cationic Rh(i) O,C chelates. While the Rh-carbene interaction is similar in all these 16-electron complexes, structural analysis reveals that the strength of the Rh-O bond is greatly affected by the nature of the O-donor: R-O^- > R-OH > R-OBF₃. These subtle changes in the nature of the O-containing tether are found to be responsible for large differences in the alkene hydrosilylation catalytic activity of these compounds: the stronger the Rh-O interaction, the better the catalytic performances. The most active catalyst, [Rh(L)(COD)], 2, demonstrated good catalytic activity under mild reaction conditions for the hydrosilylation of a range of alkene substrates with the industrially relevant non-activated tertiary silane, 1,1,1,3,5,5,5-heptamethyltrisiloxane (MD^HM). Furthermore, this complex is an effective catalyst for the selective remote functionalization of internal olefins at room temperature via tandem alkene isomerization-hydrosilylation.

Positional and Geometrical Isomerisation of Alkenes: The Pinnacle of Atom Economy

Strategies to achieve spatiotemporal regulation of pre-existing alkenes via external stimuli are essential given the ubiquity of feedstock olefins in chemistry and their downstream applications. Mirroring the 1-0 switch that underpins mammalian vision through selective geometric isomerisation in retinal, strategies to manipulate 2D space by both geometric and positional isomerisation of alkenes via chemical, thermal and light-driven processes are being intensively pursued. This minireview highlights the current state of the art in activating and achieving directionality in these fundamental chemical transformations.

One-Pot Synthesis of Deuterated Aldehydes from Arylmethyl Halides

A facile, one-pot approach for synthesizing deuterated aldehydes from arylmethyl halides was developed using D₂O as the deuterium source. The efficient process is realized by a sequence of formation, H/D exchange, and oxidation of pyridinium salt intermediates. The mild and air-compatible reaction conditions enable efficient synthesis of diverse deuterated aldehydes with high deuterium incorporation.

Palladium-catalysed alkene chain-running isomerization

We report a method for palladium-catalysed chain-running isomerization of terminal and internal alkenes. Using an air-stable 2,9-dimethylphenanthroline-palladium catalyst in combination with NaBAr₄ promoter, olefins are converted to the most stable double bond isomer at -30 to 20 °C. Silyl enol ethers are readily formed from silylated allylic alcohols. Fluorinated substituents are compatible with the reaction conditions, allowing the synthesis of fluoroenolates. Catalyst loading as low as 0.05% can be employed on a gram scale.

Cobalt Catalysis for Enantioselective Cyclobutanone Construction

Over the past 40 years, intramolecular hydroacylation has favored five-membered rings, in preference to four membered rings. Herein, we report a catalyst derived from earth-abundant cobalt that enables preparation of cyclobutanones, with excellent regio-, diastereo-, and enantiocontrol, under mild conditions (2 mol % catalyst loading and as low as 50 °C).

Synthesis and applications of rhodacyclopentanones derived from C-C bond activation

Rhodacyclopentanones, an "sp(3)-rich" class of metallacycle, underpin an emerging range of catalytic methodologies for the direct generation of complex scaffolds. This review highlights strategies for accessing rhodacyclopentanones (and related species) by C-C bond activation of cyclobutanones or cyclopropanes. The scope and mechanism of methodologies that exploit these activation modes is outlined.

Rhodium-Catalyzed Intramolecular C-H Silylation by Silacyclobutanes

Silacyclobutane was discovered to be an efficient C-H bond silylation reagent. Under the catalysis of Rh(I) /TMS-segphos, silacyclobutane undergoes sequential C-Si/C-H bond activations, affording a series of π-conjugated siloles in high yields and regioselectivities. The catalytic cycle was proposed to involve a rarely documented endocyclic β-hydride elimination of five-membered metallacycles, which after reductive elimination gave rise to a Si-Rh(I) species that is capable of C-H activation.

Rhodium-Catalyzed Enantioselective Cycloisomerization to Cyclohexenes Bearing Quaternary Carbon Centers

We report a Rh-catalyzed enantioselective cycloisomerization of α,ω-heptadienes to afford cyclohexenes bearing quaternary carbon centers. Rhodium(I) and a new SDP ligand promote chemoselective formation of a cyclohex-3-enecarbaldehyde motif that is inaccessible by the Diels-Alder cycloaddition. Various α,α-bisallylaldehydes rearrange to generate six-membered rings by a mechanism triggered by aldehyde C-H bond activation. Mechanistic studies suggest a pathway involving regioselective carbometalation and endocyclic β-hydride elimination.

Recent advances in transition metal-catalysed hydroacylation of alkenes and alkynes

This highlight presents advances in transition metal-catalysed alkene and alkyne hydroacylation over the past three years.

Rh-Catalyzed Desymmetrization of α-Quaternary Centers by Isomerization-Hydroacylation

We describe a Rh-catalyzed desymmetrization of all-carbon quaternary centers from α,α-bis(allyl)aldehydes by a cascade featuring isomerization and hydroacylation. This desymmetrization competes with two other novel olefin functionalizations that are triggered by C-H bond activation, including carboacylation and bisacylation. A BIPHEP ligand promotes enantioselective formation of α-vinylcyclopentanones. Mechanistic studies support irreversible and enantioselective olefin-isomerization followed by olefin-hydroacylation.