Boronate-Affinity Glycan-Oriented Surface Imprinting: A New Strategy to Mimic Lectins for the Recognition of an Intact Glycoprotein and Its Characteristic Fragments

High-sensitivity detection of glycoproteins by high-density boric acid modified metal-organic framework surface molecularly imprinted polymers resonant light scattering sensor

Glycoproteins are difficult to be detected by imprinting strategy due to their low natural abundance, high flexible conformation and large size. Herein, a high-density boric acid modified metal-organic framework (MOF) surface molecularly imprinted polymer (SMIP) resonant light scattering sensor was constructed for the high-sensitivity detection of target glycoproteins. A MOF with large specific surface area was selected as the substrate material to support the boric acid group with high loading density (4.66 %). The introduction of the boric acid group in the SMIP provided a high-affinity binding site for the recognition and binding of glycoproteins. Shallow surface cavities with rapid mass transfer (equilibrium time 20 min) were thus formed by surface imprinting. Furthermore, high sensitivity (limit of detection 15 pM) was achieved at physiological pH (7.4), which was conducive to the detection of glycoproteins with low natural abundance in complex biological samples and maintaining physiological activity.

Oriented surface imprinting of epitopes anchored on silica nanoparticles containing quantum dots by thiol-disulfide exchange reactions for the enhanced fluorescence detection of proteins

As artificial receptors for protein recognition, epitope-imprinted polymers combined with fluorescence sensing based on quantum dots (QDs) can be potentially used for biological analysis and disease diagnosis. However, the usual way for fabrication of QD sensors through unoriented epitope imprinting is confronted with the problems of disordered imprinting sites and low template utilization. In this context, a facile and efficient oriented epitope surface imprinting was put forward based on immobilization of the epitope templates via thiol-disulfide exchange reactions. With N-succinimidyl 3-(2-pyridyldithio)-propionate (SPDP) as a heterobifunctional reagent, cysteine-modified epitopes of cytochrome c were anchored on the surface of pyridyl disulfide functionalized silica nanoparticles sandwiching CdTe QDs. After surface imprinting via a sol-gel process, the epitope templates were removed from the surface-imprinted layers simply by reduction of the thiol-disulfide, affording oriented epitope-imprinted sites. By this method, the amount of epitope templates was only 1/20 of traditionally unoriented epitopes. The resulting sensors demonstrated significantly enhanced imprinting performance and high sensitivity, with the imprinting factor increasing from 2.6 to 3.9, and the limit of detection being 91 nM. Such epitope-oriented surface-imprinted method may offer a new design strategy for the construction of high-affinity protein recognition nanomaterials with fluorescence sensing.

A LMOF/MIP paper-based chip and analysis of tetracycline in foodstuff with sample-to-answer performance

The development of high-performance specific sensors is promising for the rapid detection of harmful residues in animal-derived foods. Recently, luminescent metal-organic framework/molecularly imprinted polymer (LMOF/MIP) materials have been developed as ideal candidates for the analysis of harmful residues. Here, we reported a simple fabrication protocol of paper-based chip through in-situ growth of LMOF on a negatively charged modified filter paper, a paper-based molecularly imprinting layer (FP@BA-Eu@MIP) was thereafter successfully prepared via the boronate affinity-based controllable oriented surface imprinting strategy. The paper-based chips obtained were used to construct a rapid test strip of tetracycline (TC). After addition of TC, significant fluorescence changes on the surface of the FP@BA-Eu@MIP paper-based chip could be observed from blue to red via inner filter effect and photo-induced electron transfer under the excitation of 360 nm. The adsorption kinetics was explored in detail. The presented strip exhibited satisfied selectiveness and sensitivity with a limit of detection of 8.47 μg L-1 for TC. It was confirmed that LMOF/MIP as a biomimetic recognition module can play a crucial role in enrichment and fluorescence response. This study provided a real application case for an in-situ fabricated fluorescence paper-based chip in rapidly detecting harmful residues.

Lectin-modified drug delivery systems - Recent applications in the oncology field

Chemotherapy with cytotoxic drugs remains the core treatment for cancer but, due to the difficulty to find general and usable biochemical differences between cancer cells and normal cells, many of these drugs are associated with lack of specificity, resulting in side effects and collateral cytotoxicity that impair patients' adherence to therapy. Novel cancer treatments in which the cytotoxic effect is maximized while adverse effects are reduced can be implemented by developing targeted therapies that exploit the specific features of cancer cells, such as the typical expression of aberrant glycans. Modification of drug delivery systems with lectins is one of the strategies to implement targeted chemotherapies, as lectins are able to specifically recognize and bind to cancer-associated glycans expressed at the surface of cancer cells, guiding the drug treatment towards these cells and not affecting healthy ones. In this paper, recent advances on the development of lectin-modified drug delivery systems for targeted cancer treatments are thoroughly reviewed, with a focus on their properties and performance in diverse applications, as well as their main advantages and limitations. The synthesis and analytical characterization of the cited lectin-modified drug delivery systems is also briefly described. A comparison with free-drug treatments and with antibody-modified drug delivery systems is presented, emphasizing the advantages of lectin-modified drug delivery systems. Main constraints and potential challenges of lectin-modified drug delivery systems, including key difficulties for clinical translation of these systems, and the required developments in this area, are also signalled.

Phenylboronic acid-functionalized biomaterials for improved cancer immunotherapy via sialic acid targeting

Phenylboronic acid (PBA) is recognized as one of the most promising cancer cell binding modules attributed to its potential to form reversible and dynamic boronic ester covalent bonds. Exploring the advanced chemical versatility of PBA is crucial for developing new anticancer therapeutics. The presence of a specific Lewis acidic boron atom-based functional group and a Π-ring-connected ring has garnered increasing interest in the field of cancer immunotherapy. PBA-derivatized functional biomaterials can form reversible bonds with diols containing cell surface markers and proteins. This review primarily focuses on the following topics: (1) the importance and versatility of PBA, (2) different PBA derivatives with pKa values, (3) specific key features of PBA-mediated biomaterials, and (4) cell surface activity for cancer immunotherapy applications. Specific key features of PBA-mediated materials, including sensing, bioadhesion, and gelation, along with important synthesis strategies, are highlighted. The utilization of PBA-mediated biomaterials for cancer immunotherapy, especially the role of PBA-based nanoparticles and PBA-mediated cell-based therapeutics, is also discussed. Finally, a perspective on future research based on PBA-biomaterials for immunotherapy applications is presented.

Design of pH-responsive molecularly imprinted polymer as a carrier for controlled and sustainable capecitabine release

A molecularly imprinting polymer (MIP) carrier with pH-responsivity was designed to construct a drug delivery system (DDS) focusing on controlled and sustainable capecitabine (CAPE) release. The pH-responsive characteristic was achieved by the functionalization of SiO2 substrate with 4-formylphenylboronic acid, accompanied by the introduction of fluorescein isothiocyanate for the visualization of the intracellular localization of the nanocarrier. Experimental results indicated that CAPE was adsorbed onto the drug carrier with satisfactory encapsulation efficiency. The controlled release of CAPE was realized based on the break of borate ester bonds between -B(OH)2 and cis-diols in the weakly acidic environment. Density functional theory computations were conducted to investigate the adsorption/release mechanism. Moreover, in vitro experiments confirmed the good biocompatibility and ideal inhibition efficiency of the developed DDS. The MIP can act as an eligible carrier and exhibits the great potential in practical applications for tumor treatment.

Triazine-structured covalent organic framework nanosheets with inherent hydrophilicity for the highly efficient and selective enrichment of glycosylated peptides

Protein glycosylation plays a crucial role in various biological processes and is related to various diseases. Highly specific enrichment of glycopeptides before mass spectrometry detection is crucial for comprehensive glycoproteomic analysis. However, it still remains a great challenge due to the absence of affinity materials with excellent enrichment efficiency. In this work, a triazine structure linked by a -NH- bond of two-dimensional (2-D) covalent organic framework (COF) nanosheets was synthesized as an affinity adsorbent for the selective capture of glycopeptides. In particular, by introducing hydrophilic monomers via a bottom-up approach, the 2-D COF (denoted as NENP-1) nanosheets were provided with abundant amino groups and inherent hydrophilicity. Owing to the specific surface area and excessive accessible sites for hydrophilicity, the resulting NENP-1 nanosheets exhibited an outstanding glycopeptide enrichment efficiency from standard samples with a superior detection sensitivity (1 × 10-10 M), good enrichment selectivity (1 : 800, HRP tryptic digest to BSA protein), excellent binding capacity (100 mg g-1), great reusability, and recovery (60.2%). Furthermore, using the NENP-1 nanosheet adsorbent, twenty-four endogenous glycopeptides in the serum of patients with gastric cancer were successfully identified by LC-MS/MS technology, which illustrates a promising prospective of hydrophilic COF nanosheets in glycoproteomics research.

Fundamentals, Synthetic Strategies and Applications of Non-Covalently Imprinted Polymers

Molecular imprinting has emerged as an important and practical technology to create economical and stable synthetic mimics of antibodies and enzymes. It has already found a variety of important applications, such as affinity separation, chemical/biological sensing, disease diagnostics, proteomics, bioimaging, controlled drug release, and catalysis. In the past decade, significant breakthroughs have been made in non-covalently imprinted polymers, from their synthesis through to their applications. In terms of synthesis, quite a few versatile and facile imprinting approaches for preparing MIPs have been invented, which have effectively solved some key issues in molecular imprinting. Additionally, important applications in several areas, such as sensors, proteomics and bioimaging, have been well demonstrated. In this review, we critically and comprehensively survey key recent advances made in the preparation of non-covalently imprinted polymers and their important applications. We focus on the state-of-art of this technology from three different perspectives: fundamentals, synthetic strategies, and applications. We first provide a fundamental basis for molecular imprinting technologies that have been developed, which is extremely helpful for establishing a sound understanding of the challenges in molecular imprinting. Then, we discuss in particular the major breakthroughs within the last ten years (2014-2024), with emphasis on new imprinting approaches, what strengths the breakthroughs can provide, and which new applications the properties of the prepared non-covalently imprinted polymers are fit for.

One-step enrichment and stepwise elution of glycoproteins and phosphoproteins by hydrophilic Ti4+-immobilized dendrimer poly(glycidyl methacrylate) microparticles functionalized with polyethylenimine and phytic acid

Glycosylation and phosphorylation rank as paramount post-translational modifications, and their analysis heavily relies on enrichment techniques. In this work, a facile approach was developed for the one-step simultaneous enrichment and stepwise elution of glycoproteins and phosphoproteins. The core of this approach was the application of the novel titanium (IV) ion immobilized poly(glycidyl methacrylate) microparticles functionalized with dendrimer polyethylenimine and phytic acid. The microparticles possessed dual enrichment capabilities due to their abundant titanium ions and hydroxyl groups on the surface. They demonstrate rapid adsorption equilibrium (within 30 min) and exceptional adsorption capacity for β-casein (1107.7 mg/g) and horseradish peroxidase (438.6 mg/g), surpassing that of bovine serum albumin (91.7 mg/g). Furthermore, sodium dodecyl sulfate-polyacrylamide gel electrophoresis was conducted to validate the enrichment capability. Experimental results across various biological samples, including standard protein mixtures, non-fat milk, and human serum, demonstrated the remarkable ability of these microparticles to enrich low-abundance glycoproteins and phosphoproteins from biological samples.

Fabricating Ultrathin Imprinting Layer for Fast Capture of Valsartan via a Metal Affinity-Oriented Surface Imprinting Method

Rapid separation and enrichment of targets in biological matrixes are of significant interest in multiple life sciences disciplines. Molecularly imprinted polymers (MIPs) have vital applications in extraction and sample cleanup owing to their excellent specificity and selectivity. However, the low mass transfer rate, caused by the heterogeneity of imprinted cavities in polymer networks and strong driving forces, significantly limits its application in high-throughput analysis. Herein, one novel metal affinity-oriented surface imprinting method was proposed to fabricate an MIP with an ultrathin imprinting layer. MIPs were prepared by immobilized template molecules on magnetic nanoparticles (NPs) with metal ions as bridges via coordination, and then polymerization was done. Under the optimized conditions, the thickness of the imprinting layer was merely 1 nm, and the adsorption toward VAL well matched the Langmuir model. Moreover, it took just 5 min to achieve adsorption equilibrium significantly faster than other reported MIPs toward VAL. Adsorption capacity still can reach 25.3 mg/g ascribed to the high imprinting efficiency of the method (the imprinting factor was as high as 5). All evidence proved that recognition sites were all external cavities and were evenly distributed on the surface of the NPs. The obtained MIP NPs exhibited excellent selectivity and specificity toward VAL, with good dispersibility and stability. Coupled with high-performance liquid chromatography, it was successfully used as a dispersed solid phase extraction material to determine VAL in serum. Average recoveries are over 90.0% with relative standard deviations less than 2.14% at three spiked levels (n = 3). All evidence testified that the MIPs fabricated with the proposed method showed a fast trans mass rate and a large rebinding capacity. The method can potentially use high-throughput separation and enrichment of target molecules in batch samples to meet practical applications.

Functional Interface for Glycoprotein Sensing: Focusing on Biosensors

Glycosylated proteins or glycoproteins make up a large family of glycoconjugates, and they participate in a variety of fundamental biological events. Glycoproteins have become important biomarkers in the diagnosis and treatment of a number of tumors. Biosensors are quite suitable for glycoprotein detection. The design and fabrication of a functional sensing interface play a crucial role in the biosensor construction to target glycoproteins. The functional interface, particularly receptors, typically determines the key characteristics of a biosensor, such as selectivity and sensitivity. Antibody, peptide, aptamer, boronic acid derivative, lectin, and molecularly imprinted polymer are all capable receptors for glycoprotein recognition, and each of these will be discussed. Most glycoproteins exist in low abundance, thus rendering signal amplification techniques indispensable. Nucleic acid-mediated and nanomaterial-mediated signal amplification for the detection of glycoproteins will be focused on herein. This review aims to highlight these different functional interfaces for glycoprotein sensing.

Enrichment of phosphopeptides by arginine-functionalized magnetic chitosan nanoparticles

One of the most crucial and prevalent post-translational modifications is the phosphorylation of proteins. The study and examination of protein phosphorylation hold immense importance in comprehending disease mechanisms and discovering novel biomarkers. However, the inherent low abundance, low ionization efficiency, and coexistence with non phosphopeptides seriously affect the direct analysis of phosphopeptides by mass spectrometry. In order to tackle these problems, it is necessary to carry out selective enrichment of phosphopeptides prior to conducting mass spectrometry analysis. Herein, magnetic chitosan nanoparticles were developed by incorporating arginine, and were then utilized for phosphopeptide enrichment. A tryptic digest of β-casein was chosen as the standard substance. After enrichment, combined with matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS), the detection limit of the method was 0.4 fmol. The synthesized magnetic material demonstrated great potential in the detection of phosphopeptides in complex samples, as proven by its successful application in detecting phosphopeptides in skim milk and human saliva samples.

Monitoring of Medical Wastewater by Sensitive, Convenient, and Low-Cost Determination of Small Extracellular Vesicles Using a Glycosyl-Imprinted Sensor

The monitoring of small extracellular vesicles (sEVs) in medical waste is of great significance for the prevention of the spread of infectious diseases and the treatment of environmental pollutants in medical waste. Highly sensitive and selective detection methods are urgently needed due to the low content of sEVs in waste samples and the complex sample composition. Herein, a glycosyl-imprinted electrochemical sensor was constructed and a novel strategy for rapid, sensitive, and selective sEVs detection was proposed. The characteristic trisaccharide at the end of the glycosyl chain of the glycoprotein carried on the surface of the sEVs was used as the template molecule. The glycosyl-imprinted polymer films was then prepared by electropolymerization with o-phenylenediamine (o-PD) and 3-aminophenylboronic acid (m-APBA) as functional monomers. sEVs were captured by the imprinted cavities through the recognition and adsorption of glycosyl chains of glycoproteins on sEVs. The m-APBA molecule also acted as a signal probe and was then attached on the immobilized glycoprotein on the surface of sEVs by boric acid affinity. The electrochemical signal of m-APBA was amplificated due to the abundant glycoproteins on the surface of sEVs. The detection range of the sensor was 2.1 × 104 to 8.7 × 107 particles/mL, and the limit of detection was 1.7 × 104 particles/mL. The sensor was then applied to the determination of sEVs in medical wastewater and urine, which showed good selectivity, low detection cost, and good sensitivity.

The Rise of Boron-Containing Compounds: Advancements in Synthesis, Medicinal Chemistry, and Emerging Pharmacology

Boron-containing compounds (BCC) have emerged as important pharmacophores. To date, five BCC drugs (including boronic acids and boroles) have been approved by the FDA for the treatment of cancer, infections, and atopic dermatitis, while some natural BCC are included in dietary supplements. Boron's Lewis acidity facilitates a mechanism of action via formation of reversible covalent bonds within the active site of target proteins. Boron has also been employed in the development of fluorophores, such as BODIPY for imaging, and in carboranes that are potential neutron capture therapy agents as well as novel agents in diagnostics and therapy. The utility of natural and synthetic BCC has become multifaceted, and the breadth of their applications continues to expand. This review covers the many uses and targets of boron in medicinal chemistry.

Surface Modification of Polystyrene with Boronic Acid for Immunoaffinity-Based Cell Enrichment

Obtaining an enriched and phenotypically pure cell population from heterogeneous cell mixtures is important for diagnostics and biosensing. Existing techniques such as fluorescent-activated cell sorting (FACS) and magnetic-activated cell sorting (MACS) require preincubation with antibodies (Ab) and specialized equipment. Cell immunopanning removes the need for preincubation and can be done with no specialized equipment. The majority of the available antibody-mediated analyte capture techniques require a modification to the Abs for binding. In this work, no antibody modification is used because we take advantage of the carbohydrate chain in the Fc region of Ab. We use boronic acid as a cross-linker to bind the Ab to a modified surface. The process allows for functional orientation and cleavable binding of the Ab. In this study, we created an immunoaffinity matrix on polystyrene (PS), an inexpensive and ubiquitous plastic. We observed a 37% increase in Ab binding compared with that of a passive adsorption approach. The method also displayed a more consistent antibody binding with 17 times less variation in Ab loading among replicates than did the passive adsorption approach. Surface topography analysis revealed that a dextran coating reduced nonspecific antibody binding. Elemental analysis (XPS) was used to characterize the surface at different stages and showed that APBA molecules can bind upside-down on the surface. While upside-down antibodies likely remain functional, their elution behavior might differ from those bound in the desired way. Cell capture experiments show that the new surface has 43% better selectivity and 2.4-fold higher capture efficiency compared to a control surface of passively adsorbed Abs. This specific surface chemistry modification will allow the targeted capture of cells or analytes with the option of chemical detachment for further research and characterization.

Glycan-specific molecularly imprinted polymers towards cancer diagnostics: merits, applications, and future perspectives

Aberrant glycans are a hallmark of cancer states. Notably, emerging evidence has demonstrated that the diagnosis of cancers with tumour-specific glycan patterns holds great potential to address unmet medical needs, especially in improving diagnostic sensitivity and selectivity. However, despite vast glycans having been identified as potent markers, glycan-based diagnostic methods remain largely limited in clinical practice. There are several reasons that prevent them from reaching the market, and the lack of anti-glycan antibodies is one of the most challenging hurdles. With the increasing need for accelerating the translational process, numerous efforts have been made to find antibody alternatives, such as lectins, boronic acids and aptamers. However, issues concerning affinity, selectivity, stability and versatility are yet to be fully addressed. Molecularly imprinted polymers (MIPs), synthetic antibody mimics with tailored cavities for target molecules, hold the potential to revolutionize this dismal progress. MIPs can bind a wide range of glycan markers, even those without specific antibodies. This capacity effectively broadens the clinical applicability of glycan-based diagnostics. Additionally, glycoform-resolved diagnosis can also be achieved through customization of MIPs, allowing for more precise diagnostic applications. In this review, we intent to introduce the current status of glycans as potential biomarkers and critically evaluate the challenges that hinder the development of in vitro diagnostic assays, with a particular focus on glycan-specific recognition entities. Moreover, we highlight the key role of MIPs in this area and provide examples of their successful use. Finally, we conclude the review with the remaining challenges, future outlook, and emerging opportunities.

An Electrochemiluminescent Sensor Based on Glycosyl Imprinting and Aptamer for the Detection of Cancer-Related Extracellular Vesicles

Cancer-related extracellular vesicles (EVs) are considered important biomarkers for cancer diagnosis because they can convey a large amount of information about tumor cells. In order to detect cancer-related EVs efficiently, an electrochemiluminescence (ECL) sensor for the specific identification and highly sensitive detection of EVs in the plasma of cancer patients was constructed based on dual recognitions by glycosyl-imprinted polymer (GIP) and aptamer. The characteristic glycosyl Neu5Ac-α-(2,6)-Gal-β-(1-4)-GlcNAc trisaccharide on the surface of EVs was used as a template molecule and 3-aminophenylboronic acid as a functional monomer to form a glycosyl-imprinted polymer by electropolymerization. After glycosyl elution, the imprinted film specifically recognized and adsorbed the EVs in the sample, and then the CD63 aptamer-bipyridine ruthenium (Aptamer-Ru(bpy)) was added to combine with the CD63 glycoprotein on the extracellular vesicle's surface, thus providing secondary recognition of the EVs. Finally, the EVs were quantitatively detected according to the ECL signal produced by the labeled bipyridine ruthenium. When more EVs were captured by the imprinted film, more probes were obtained after incubation, and the ECL signal was stronger. Under the optimized conditions, the ECL signal showed a good linear relationship with the concentration of EVs in the range of 9.5 × 102 to 9.5 × 107 particles/mL, and the limit of detection was 641 particles/mL. The GIP sensor can discriminate between the EV contents of cancer patients and healthy controls with high accuracy. Because of its affordability, high sensitivity, and ease of use, it is anticipated to be employed for cancer early detection and diagnosis.

An efficient strategy with a synergistic effect of hydrophilic and electrostatic interactions for simultaneous enrichment of N- and O-glycopeptides

N- and O-glycosylation modifications of proteins are closely linked to the onset and development of many diseases and have gained widespread attention as potential targets for therapy and diagnosis. However, the low abundance and low ionization efficiency of glycopeptides as well as the high heterogeneity make glycosylation analysis challenging. Here, an enrichment strategy, using Knoevenagel copolymers modified with polydopamine-adenosine (denoted as PDA-ADE@KCP), was firstly proposed for simultaneous enrichment of N- and O-glycopeptides through the synergistic effects of hydrophilic and electrostatic interactions. The adjustable charged surface and hydrophilic properties endow the material with the capability to achieve effective enrichment of intact N- and O-glycopeptides. The experimental results exhibited excellent selectivity (1 : 5000) and sensitivity (0.1 fmol μL-1) of the prepared material for N-glycopeptides from standard protein digest samples. Moreover, it was further applied to simultaneous capturing of N- and O-glycopeptides from mouse liver protein digests. Compared to the commercially available zwitterionic hydrophilic interaction liquid chromatography (ZIC-HILIC) material, the number of glycoproteins corresponding to all N- and O-glycopeptides enriched with PDA-ADE@KCP was much more than that with ZIC-HILIC. Furthermore, PDA-ADE@KCP captured more O-glycopeptides than ZIC-HILIC, revealing its superior performance in O-glycopeptide enrichment. All these results indicated that the strategy holds immense potential in characterizing N- and O-intact glycopeptides in the field of proteomics.

Preparation of poly(caffeic acid)-coated epitope molecularly imprinted polymers and investigation of adsorption performance toward ovalbumin

Food allergy can lead to severe allergic reactions that are potentially fatal for human, hence the detection of food allergens such as ovalbumin (OVA) is important. In this study, a poly(caffeic acid)-coated epitope molecularly imprinted polymer (EMIP) was prepared by chelation and autoxidation of caffeic acid with hexamethylenediamine. EMIP has not only imprinted cavities highly matched with OVA in size and spatial structure, but also externally abundant hydrophilic groups, resulting in few non-specific binding and good hydrophilicity. With high specificity, significant paramagnetism, and great reusability, EMIP can distinguish OVA from other proteins and selectively enrich OVA in egg white samples, which opens up a promising route to the determination of allergens in food products.

Enrichment of sialic acid-containing casein glycomacropeptide in protein hydrolysates using phenylboronic acid-functionalized mesoporous silica nanoparticles

Glycomacropeptide (GMP) is a bioactive peptide of high value, rich in glycosylation sites and with physiological and dietary therapeutic value. The enrichment and detection of GMP facilitates the accurate quantification and the identification of adulteration of GMP in food products. In GMP, sialic acid is an abundant glycosyl group and is mainly located at the end of the sugar chain. Here, we propose a novel GMP enrichment strategy based on the affinity of sialic acid for phenylboronic acid groups that shift with environmental pH. As an enrichment material, mesoporous silica nanoparticles were progressively modified with aminopropyl and phenylboronic acid groups. The developed material showed excellent selectivity for sialic acid in the presence of galactose and fucose as interferents. The adsorption behavior of sialic acid-containing GMP fits the Langmuir adsorption model, offering a recovery of 71.72% (in terms of sialic acid content) and a GMP relative purity of 0.957. Results from sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and size exclusion chromatography confirm that the enriched GMP contains almost no other unexpected proteins and peptides, indicating that the developed strategy holds promise for purifying GMP in various dairy systems.

Recent Advances in Molecular Imprinting for Proteins on Magnetic Microspheres

The separation of proteins in biological samples plays an essential role in the development of disease detection, drug discovery, and biological analysis. Protein imprinted polymers (PIPs) serve as a tool to capture target proteins specifically and selectively from complex media for separation purposes. Whereas conventional molecularly imprinted polymer is time-consuming in terms of incubation studies and solvent removal, magnetic particles are introduced using their magnetic properties for sedimentation and separation, resulting in saving extraction and centrifugation steps. Magnetic protein imprinted polymers (MPIPs), which combine molecularly imprinting materials with magnetic properties, have emerged as a new area of research hotspot. This review provides an overview of MPIPs for proteins, including synthesis, preparation strategies, and applications. Moreover, it also looks forward to the future directions for research in this emerging field.

Elucidation of the Binding Orientation in α2,3- and α2,6-Linked Neu5Ac-Gal Epitopes toward a Hydrophilic Molecularly Imprinted Monolith

N-Acetylneuraminic acid and its α2,3/α2,6-glycosidic linkages with galactose (Neu5Ac-Gal) are major carbohydrate antigen epitopes expressed in various pathological processes, such as cancer, influenza, and SARS-CoV-2. We here report a strategy for the synthesis and binding investigation of molecularly imprinted polymers (MIPs) toward α2,3 and α2,6 conformations of Neu5Ac-Gal antigens. Hydrophilic imprinted monoliths were synthesized from melamine monomer in the presence of four different templates, namely, N-acetylneuraminic acid (Neu5Ac), N-acetylneuraminic acid methyl ester (Neu5Ac-M), 3'-sialyllactose (3SL), and 6'-sialyllactose (6SL), in a tertiary solvent mixture at temperatures varying from -20 to +80 °C. The MIPs prepared at cryotemperatures showed a preferential affinity for the α2,6 linkage sequence of 6SL, with an imprinting factor of 2.21, whereas the α2,3 linkage sequence of 3SL resulted in nonspecific binding to the polymer scaffold. The preferable affinity for the α2,6 conformation of Neu5Ac-Gal was evident also when challenged by a mixture of other mono- and disaccharides in an aqueous test mixture. The use of saturation transfer difference nuclear magnetic resonance (STD-NMR) on suspensions of crushed monoliths allowed for directional interactions between the α2,3/α2,6 linkage sequences on their corresponding MIPs to be revealed. The Neu5Ac epitope, containing acetyl and polyalcohol moieties, was the major contributor to the sequence recognition for Neu5Ac(α2,6)Gal(β1,4)Glc, whereas contributions from the Gal and Glc segments were substantially lower.

Discrimination of cis-diol-containing molecules using fluorescent boronate affinity probes by principal component analysis

Fluorescent boronate affinity molecules have gained increasing attention in the field of fluorescence sensing and detection due to their selective recognition capability towards cis-diol-containing molecules (cis-diols). However, the conventional fluorescent boronate affinity molecules face a challenge in differentiating the type of cis-diol only by their fluorescence responses. In this study, a simple method was used to discriminate different types of cis-diols, including nucleosides, nucleotides, sugars, and glycoproteins based on the phenylboronic acid-functionalized fluorescent molecules combined with principal component analysis (PCA). Both fluorescent molecules were simply synthesized by the covalent interaction between the amino group in 3-aminophenyl boronic acid and the isothiocyanate group in fluorescein or rhodamine B. In view of their fluorescence-responsive behaviors to these cis-diols directly, it is impossible to differentiate their types even under the optimized experimental conditions. When PCA was employed to treat the fluorescence response data and the quenching constants with their molecular weight, different types of cis-diols can be distinguished successfully. As a result, by integrating the fluorescence response of the boronate affinity probes with PCA, it can greatly improve the specific recognition capability of the boronic acids, providing a simple and direct way to distinguish and identify different types of cis-diols.

Sequentially Controlled Recognition of Different Proteins Using Programmable Protein Imprinted Nanospheres

Although protein imprinted materials with multiple templates are developed to selectively separate different proteins, it is difficult to achieve the programmed adsorption and separation of different proteins using one material, because the available protein imprinted materials are constructed through irreversible crosslinking and their structures are unprogrammable and non-reconstructive. Herein, a novel nanosphere (MS@PTL-g-PNIPAM) is designed, which not only is temperature and pH responsive but also can dynamically reversibly crosslink/de-crosslink under ultraviolet light of different wavelengths. With the help of the dynamically reversible photo-crosslinking, the nanospheres can be repeatedly programmed into protein imprinted nanospheres toward different target proteins. Moreover, the prepared imprinted nanospheres can easily achieve the controlled rebinding and release of target proteins, benefiting from the introduced temperature- and pH-responsive moieties. As a consequence, this study realizes the specific separation of different target proteins from protein mixture and the real bovine blood sequentially by programming one material. It is resource saving, time saving, recyclable, and it will provide convenience for protein imprinted materials to use in the blood purification, drug delivery, and virus detection.

Boronic acid-functionalized magnetic porphyrin-based covalent organic framework for selective enrichment of cis-diol-containing nucleosides

In this study, a novel boronic acid-functionalized magnetic porphyrin-based covalent organic framework (COF) with a core-shell structure was designed and synthesized for the selective enrichment and detection of nucleosides. Firstly, brominated porphyrin-based COF was in situ grown on Fe3O4-NH2 nanospheres (denoted as Fe3O4@Br-COF), then a post-synthetic modification strategy was used to introduce boronic acid into the framework via Suzuki-Miyaura cross-coupling reaction to obtain boronic acid functionalized magnetic COF (denoted as Fe3O4@BA-COF). Suzuki-Miyaura cross-coupling possesses the advantages of mild synthesis conditions, high tolerance to functionalities, and ease of handling and separation, which is considered as a promising candidate for functionalizing COF. It is worth mentioning that the porphyrin-based COF possesses a unique nitrogen-rich skeleton and "trap" structure formed by four pyrrole rings, which can provide hydrogen bond and make it more suitable for trapping analytes than other types of COF. The boronic acid group provides boronate affinity, which enables better selective enrichment of cis-diol-containing nucleoside. The morphology and structure of the prepared Fe3O4@BA-COF was characterized by various methods. Based on the Fe3O4@BA-COF, a facile magnetic solid phase extraction coupled with high performance liquid chromatography method (MSPE-HPLC) was used to extract and detect adenosine, guanosine, uridine, and cytidine in urine samples. This work not only provides a mild and feasible post-synthetic modification method for fabrication of boronic acid-functionalized magnetic COF, but also provides an efficient and rapid method to selectively enrich and detect hydrophilic nucleosides.

Molecularly Imprinted Nanomedicine for Anti-angiogenic Cancer Therapy via Blocking Vascular Endothelial Growth Factor Signaling

The VEGF-VEGFR2 (VEGF = vascular endothelial growth factor) signaling has been a promising target in cancer therapy. However, because conventional anti-angiogenic therapeutics suffer from drawbacks, particularly severe side effects, novel anti-angiogenic strategies are much needed. Herein, we report the rational engineering of VEGF-targeted molecularly imprinted polymer nanoparticles (nanoMIP) for anti-angiogenic cancer therapy. The anti-VEGF nanomedicine was prepared via a state-of-the-art molecular imprinting approach using the N-terminal epitope of VEGF as the template. The nanoMIP could target the two major pro-angiogenic isoforms (VEGF165 and VEGF121) with high affinity and thereby effectively block the VEGF-VEGFR2 signaling, yielding a potent anti-angiogenic effect of "killing two birds with one stone". In vivo experiments demonstrated that the anti-VEGF nanoMIP effectively suppressed tumor growth via anti-angiogenesis in a xenograft model of human colon carcinoma without apparent side effects. Thus, this study not only proposes an unprecedented anti-angiogenic strategy for cancer therapy but also provides a new paradigm for the rational development of MIPs-based "drug-free" nanomedicines.

Determination of ovalbumin sensing response of protein-imprinted bilayered hydrogel strips via measurement of mechanically driven bending angles based on swelling-induced deformation

Novel detection method has been developed to explore changes in mechanical bending angles on a bilayer of polyethylene terephthalate (PET) and molecularly imprinted polymer (MIP). For an ovalbumin (OVA)-imprinted hydrogel layer, functional monomers were employed to achieve sufficient binding effect in the polymer matrix. The OVA amount added in the MIP precursor solution and the dimensions of OVA-imprinted hydrogel (MIH) strips were controlled to maximize the change in bending angles as an OVA sensing response within a valid detection range. The sensing behaviors were determined by monitoring the difference in the bending angles via protein adsorption based on the swelling-induced deformation of the OVA-extracted hydrogel (E-MIH) strip. The equilibrium adsorption capacity of the E-MIH strip was calculated via the Bradford protein assay. The detection limit, quantification limit, and imprinting factor were calculated. To compare the selectivity coefficients, the adsorption behaviors of three proteins were investigated. Finally, the reusability of the E-MIH strip was explored via repeated adsorption and extraction. Based on the results, the E-MIH strips demonstrated a promising protein sensing platform monitoring mechanical bending angles affected by swelling deformation.

Microfluidic synthesis of pH-responsive molecularly imprinted silica nanospheres for fluorescence sensing target glycoprotein

Here, fluorescent artificial antibodies for sensing ovalbumin in food were synthesized by molecular imprinting technique in a microfluidic reactor. A phenylboronic acid-functionalized silane was employed as the functional monomer to enable the polymer has pH-responsive property. Fluorescent molecularly imprinted polymers (FMIPs) could be produced continuously in a short time. Both fluorescein isothiocyanate (FITC) and rhodamine B isothiocyanate (RB)-based FMIPs can specifically recognize the target ovalbumin, particularly FITC-based FMIP, giving an imprinting factor of 2.5 and cross-reactivity factors of 2.7 (ovotransferrin), 2.8 (β-lactoglobulin) and 3.4 (bovine serum albumin), and was applied for the detection of ovalbumin in milk powder with recovery rates of 93-110%; moreover, the FMIP can be reused at least four times. Such FMIPs have promising future in replacing the fluorophore-labelled antibodies to fabricate fluorescent sensing devices or establish immunoassay methods, which have extra merits of low-cost, high stability and recyclability, easy to carry and store at ambient environments.

Precise identification and ultrafast transport of specific molecules with nanofluid-functionalized imprinted membrane

Membrane-based imprinted sites for achieving specific molecule transport and precise recognition have great potential to revolutionize nanofiltration technology. Nonetheless, how to efficiently prepare imprinted membrane structures with accurate identification - ultrafast molecular transport - high stability in mobile phase remains a key issue and serious challenge. Herein, we have developed a dual-activation strategy to constructing nanofluid-functionalized membranes with double imprinted nanoscale channels (NMDINCs), realizing ultrafast transport performance as well as structure&size-exclusion selectivity in allusion to particular compounds. The resultant NMDINCs, founded on principal nanofluid-functionalized construction companied by the boronate affinity sol-gel imprinting systems, illustrated that delicate regulation towards polymerization framework as well as functionalization belonging to distinctive membrane structures was crucial for realizing ultrafast molecules transport combined with prominent molecules selectivity. The synergistic recognition of covalent bonds and non-covalent bonds driven by two functional monomers effectively realized the selective recognition to template molecules, leading to the high selective separation factors of Shikimic acid (SA)/ Para hydroxybenzoic acid（PHA）, SA/ P nitrophenol（PN）and catechol（CL）for 8.9, 8.14 and 7.23, respectively. The dynamic consecutive transport outcomes exhibited that numerous SA-dependent recognition sites could still keep reactivity under pump-driven permeation pressure for appreciable time, forcefully proving the successful construction as to high-efficiency membrane-based selective separation system. It is anticipated that this strategy as to the in situ introduction of nanofluid-functionalized construction into porous membrane would hold great promise in preparing high-intensities membrane-founded discriminating separation systems, which was equipped with prominent consecutive permeability as well as excellent selectivity.

Leveraging Macrophage-Mediated Cancer Immunotherapy via a Cascading Effect Induced by a Molecularly Imprinted Nanocoordinator

Reprogramming tumor-associated macrophages (TAMs) has emerged as a promising strategy in cancer immunotherapy. Targeted therapeutics integrating multiple functions to fully leverage the antitumor immune functions of macrophages without affecting systemic or tissue-resident macrophages are crucial for TAM reprogramming. Herein, by integrating molecular imprinting and nanotechnology, we rationally designed and engineered an unprecedented nanocoordinator for targeted remolding of TAMs to fully leverage the antitumor efficacy of macrophages by inducing a cascade effect. The nanocoordinator features a magnetic iron oxide nanoinner core and sialic acid-imprinted shell. Intravenously administered into systemic circulation, the nanocoordinator can rapidly accumulate at the tumor site in response to an external magnet. Then, by specifically binding to sialic acid overexpressed on tumor cells, the nanocoordinator anchors at the tumor site with prolonged retention time. Via binding with the nanocoordinator, tumor cells are tagged with a foreign substance, which promotes the intrinsic phagocytosis of macrophages. Subsequently, the nanocoordinator taken up by macrophages effectively promotes the polarization of macrophages toward the M1 phenotype, thus activating the immunotherapeutic efficacy of macrophages. Synergized by the cascade effect, this nanocoordinator effectively harnesses TAMs for macrophage-mediated immunotherapy. This study offers new TAM-targeted therapeutics that allows us to fully leverage the antitumor immune functions of macrophages without affecting the normal tissue.

Rational Supramolecular Strategy via Halogen Bonding for Effective Halogen Recognition in Molecular Imprinting

Halogen bonding is a highly directional interaction and a potential tool in functional material design through self-assembly. Herein, we describe two fundamental supramolecular strategies to synthesize molecularly imprinted polymers (MIPs) with halogen bonding-based molecular recognition sites. In the first method, the size of the σ-hole was increased by aromatic fluorine substitution of the template molecule, enhancing the halogen bonding in the supramolecule. The second method involved sandwiching hydrogen atoms of a template molecule between iodo substituents, which suppressed competing hydrogen bonding and enabled multiple recognition patterns, improving the selectivity. The interaction mode between the functional monomer and the templates was elucidated by ¹H NMR, ¹³C NMR, X-ray absorption spectroscopy, and computational simulation. Finally, we succeeded in the effective chromatographic separation of diiodobenzene isomers on the uniformly sized MIPs prepared by multi-step swelling and polymerization. The MIPs selectively recognized halogenated thyroid hormones via halogen bonding and could be applied to screening endocrine disruptors.

Functionalized pyrite nanozyme probe and imprinted polymer modified with hydrophilic layer for rapid colorimetric analysis of glycoprotein in serum

The biological molecules used in the sandwich detection method have problems such as complex extraction processes, high costs, and uneven quality. Therefore we integrated glycoprotein molecularly controllable-oriented surface imprinted magnetic nanoparticles (GMC-OSIMN) and boric acid functionalized pyrite nanozyme probe (BPNP) to replace the traditional antibody and horseradish peroxidase for sensitive detection of glycoproteins through sandwich detection. In this work, a novel nanozyme functionalized with boric acid was used to label glycoproteins that were captured by GMC-OSIMN. The substrate in the working solution catalyzed by the nanozyme labeled on the protein underwent visible color changes to the naked eye, and the generated signal can be quantitatively detected by a spectrophotometer, and the best color development conditions of the novel nanozyme under the influence of many factors were determined through multi-dimensional investigation. The optimum conditions of sandwich are optimized with ovalbumin (OVA), and it was extended to the detection of transferrin (TRF) and alkaline phosphatase (ALP) in the application. The detection range for TRF was 2.0 × 10^-1-1.0 × 10⁴ ng mL^-1 with a detection limit of 1.32 × 10^-1 ng mL^-1, The detection range for ALP was 2.0 × 10^-3-1.0 × 10² U L^-1 with the detection limit of 1.76 × 10^-3 U L^-1. This method was subsequently used to detect TRF and ALP levels in 16 liver cancer patients, and the standard deviation of the test results of each patient was less than 5.7%.

Probing Protein 4'-Phosphopantetheinylation in Single Living Cells

4'-Phosphopantetheinylation (4PPTylation) of proteins, which is derived from the hydrolysis of coenzyme A (CoA), is an essential post-translational modification participating in biosynthetic and metabolic pathways. However, due to the lack of specific recognition ligands as well as the shortage of sensitive analytical tools for single-cell analysis, the in-depth exploration of new cellular functions and mechanisms of protein 4PPTylation has been much hampered. In this study, we rationally engineered CoA-imprinted Raman nanotags for the specific recognition of 4PPTylation and thereby developed a molecularly imprinted polymer (MIP)-based plasmonic immunosandwich assay (PISA) for facile probing the 4PPTylation of ALDH1L1 in single cells. The molecularly imprinted nanotags exhibited excellent binding properties, giving a dissociation constant of 10^-6 M and cross-reactivity values of less than 10%. The MIP-based PISA enabled the specific and sensitive detection of the level of 4PPTylated ALDH1L1 in single living cells. Particularly, monitoring of the fluctuation of 4PPTylated ALDH1L1 in single cells under simulation by an inhibitor (methotrexate) that acts on a different metabolism pathway was achieved, implying possible crosstalk between two different pathways in folate metabolism. Thus, the imprinted Raman nanotags-PISA provides a promising analytical tool with a single-cell resolution for exploring new functions and elucidating their mechanisms of protein 4PPTylation.

Molecularly imprinted and cladded polymers for constructing a portable plasmonic immunoassay for peptides in biofluids

Using two molecularly imprinted and cladded polymers (cMIPs), an inexpensive, fast and portable plasmonic immuno-sandwich assay (PISA) was rationally developed for high-specificity and ultra-sensitive detection of C-peptide in urine. The dual cMIPs-based PISA allowed healthy individuals to be distinguished from diabetes patients and exhibited several significant merits over existing immunoassays, holding great promise in clinical diagnosis.

Functional thiolactone assisted imprinting cavities with abundant amines for strong binding of protein imprinted nanospheres

In order to develop new protein imprinting polymerization methods and to prepare protein imprinted nanomaterials with high recognition, a novel protein imprinted strategy is developed in this study by using polyethyleneimine (PEI) for aminolysis of tailor-made thiolactone-based functional monomers and crosslinkers on amine-modified magnetic nanospheres in an aqueous medium. The prepared protein imprinted nanospheres can seize BSA templates in the imprinting polymerization process through multiple hydrogen bonds, and hydrophobic and electrostatic interactions. In addition, the aminolysis reaction also generates abundant amide bonds in the imprinting polymer network, which not only enhances the hydrogen bonding interactions between the imprinted nanospheres and BSA but also improves the stability of the imprinting cavities by increasing the rigidity of the polymer chains. Based on the above advantages, the protein imprinted nanospheres show excellent rebinding specificity for BSA, for which the rebinding capacity is up to 505 ± 15 mg g^-1 and the imprinting factor is 4.09. The protein imprinted nanospheres exhibit fast adsorption kinetics, outstanding reusability, and can selectively separate BSA from a protein mixture and actual biological samples. The generality of this imprinted method is also verified. Thus, this study will provide a new idea for the design of protein imprinted materials with high recognition.

Epitope imprinted polymeric materials: application in electrochemical detection of disease biomarkers

Epitope imprinting is a promising method for creating specialized recognition sites that resemble natural biorecognition elements. Epitope-imprinted materials have gained a lot of attention recently in a variety of fields, including bioanalysis, drug delivery, and clinical therapy. The vast applications of epitope imprinted polymers are due to the flexibility in choosing monomers, the simplicity in obtaining templates, specificity toward targets, and resistance to harsh environments along with being cost effective in nature. The "epitope imprinting technique," which uses only a tiny subunit of the target as the template during imprinting, offers a way around various drawbacks inherent to biomacromolecule systems i.e., traditional molecular imprinting techniques with regards to the large size of proteins, such as the size, complexity, accessibility, and conformational flexibility of the template. Electrochemical based sensors are proven to be promising tool for the quick, real-time monitoring of biomarkers. This review unravels epitope imprinting techniques, approaches, and strategies and highlights the applicability of these techniques for the electrochemical quantification of biomarkers for timely disease monitoring. In addition, some challenges are discussed along with future prospective developments.

Rational Development of Hypervalent Glycan Shield-Binding Nanoparticles with Broad-Spectrum Inhibition against Fatal Viruses Including SARS-CoV-2 Variants

Infectious virus diseases, particularly coronavirus disease 2019, have posed a severe threat to public health, whereas the developed therapeutic and prophylactic strategies are seriously challenged by viral evolution and mutation. Therefore, broad-spectrum inhibitors of viruses are highly demanded. Herein, an unprecedented antiviral strategy is reported, targeting the viral glycan shields with hypervalent mannose-binding nanoparticles. The nanoparticles exhibit a unique double-punch mechanism, being capable of not only blocking the virus-receptor interaction but also inducing viral aggregation, thereby allowing for inhibiting the virus entry and facilitating the phagocytosis of viruses. The nanoparticles exhibit potent and broad-spectrum antiviral efficacy to multiple pseudoviruses, including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its major variants (D614G, N501Y, N439K, Δ69-70, Delta, and Omicron; lentiviruses expressing only the spike proteins), as well as other vital viruses (human immunodeficiency virus 1 and Lassa virus), with apparent EC50 values around the 10^-9  m level. Significantly, the broad-spectrum inhibition of authentic viruses of both wild-type SARS-CoV-2 and Delta variants is confirmed. Therefore, this hypervalent glycan-shield targeting strategy opens new access to broad-spectrum viral inhibition.

Synergistically Enhancing Tumor Chemotherapy Using an Aggregation-Induced Emission Photosensitizer on Covalently Conjugated Molecularly Imprinted Polymer Nanoparticles

Due to the polygenic and heterogeneous nature of the tumorigenesis process, traditional chemotherapy is far from desirable. Fabricating multifunctional nanoplatforms integrating photodynamic effect can synergistically enhance chemotherapy because they can make the cancer cells much sensitive to chemotherapeutics. However, how to assemble different units in nanoplatforms and minimize side effects caused by chemodrugs and photosensitizers (PSs) still needs to be explored. Herein, a nanoplatform CPP/PS-MIP@DOX is developed using a simultaneously covalently conjugated new aggregation-induced emission (AIE) PS and a cell-penetrating peptide (CPP) on the surface of silica-based molecularly imprinted polymer (MIP) nanoparticles, prepared with doxorubicin (DOX) as the template in the water system via a sol-gel technique. CPP/PS-MIP@DOX has good biocompatibility, high DOX-loading ability, promoted cellular uptake, and sustained and pH-sensitive drug release capability. Furthermore, it can efficiently penetrate into tumor tissue, accurately home to, and accumulate at the tumor site. As a result, a better efficacy with lower cytotoxicity is achieved with a smaller dosage of DOX by utilizing either the photodynamic effect or unique characteristics of the MIP. It is the first nanoplatform fabricated by chemically conjugating AIE PSs directly on the surface of the scaffold via the surface-decorated strategy and successfully applied in cancer therapy. This work provides an effective strategy by constructing AIE PS-based cancer nanomedicines with MIPs as scaffolds.

Rapid Measurement of Residual Kanamycin Using Highly Specific Biomimetic Recognition Paper-Based Chip

The development of highly specific biomimetic recognition material is a challenge for rapid detection of harmful residues in foodstuff. In this study, a paper-based boronate affinity metal-organic framework/molecularly imprinted polymer microfluidic chip (FZS-BA@MIP) was constructed based on the in situ construction strategy, which was also designed as a highly specific biomimetic recognition module. Here, the homogeneous zeolitic imidazole framework-8 (ZIF-8) membrane served as a great scaffold and enrichment layer. Besides, the recognition layer of MIP was prepared based on a highly oriented boronate affinity surface imprinting strategy. With the aid of the liquid flow channel, the highly specific enrichment and visual detection for antibiotic residues like kanamycin in actual products were achieved on the paper chip module of an integrated lateral flow platform. The whole analysis process could be accomplished within 30 min. In brief, this study offered a new integrated biomimetic recognition platform for visually detecting harmful veterinary residues containing cis-diols, which demonstrated promising commercial value in point-of-care testing of foodborne hazardous compounds.

pH-Responsive epitope-imprinted magnetic nanoparticles for selective separation and extraction of chlorogenic acid and caffeic acid in traditional Chinese medicines

Chlorogenic acid and caffeic acid often coexist in traditional Chinese medicines (TCMs) and play roles as antioxidation, antiviral, antitumor and anti-inflammatory agents. Due to their low content and the presence of structural analogues, they cannot be effectively separated by conventional extraction methods. Molecularly imprinted polymers, as synthesized receptors with antibody-like binding properties, have significant advantages in separating structural analogues. However, the harsh imprinting conditions easily induced the degradation of chlorogenic acid. Therefore, caffeic acid was used as an epitope template to replace chlorogenic acid for imprinting. Boronic acid-functionalized magnetic nanoparticles (MNPs) were selected as substrates, which could not only facilitate the immobilization and removal of the templates by pH regulation, but also achieve rapid separation under an external magnetic field. Tetraethyl orthosilicate was selected as an imprinting monomer which allowed for precise control of the thickness of the imprinting layer by adjusting the imprinting time. The prepared epitope-imprinted MNPs showed excellent specificity, in combination with high performance liquid chromatography, have been successfully applied to the selective separation and detection of chlorogenic acid and caffeic acid in TCMs.

Photothermal Therapy of Neuroblastoma via Polysialic Acid-Targeting Nanomissiles

Exploring new targets and developing novel targeted therapies are urgently needed for neuroblastoma therapy. Polysialic acid (polySia), a linear homopolymer of sialic acid units that correlates well with tumor progression and poor prognosis, has emerged as a potential target for neuroblastoma. However, the lack of polySia-specific binding reagents has severely limited the development of polySia-targeting therapeutics for neuroblastoma. Herein, the construction of polySia-targeting nanomissiles via molecular imprinting for the photothermal therapy of neuroblastoma is reported. Oligosialic acid (oligoSia) containing 3-4 units is considered as a characteristic structure for the recognition of polySia, while oligoSia containing 4-7 units digested from polySia is employed as the template. Via boronate-affinity controllable oriented surface imprinting, oligoSia-imprinted nanoparticles (oSia-MIP) are prepared. The oSia-MIP allows for specifically recognizing polySia and targeting polySia overexpressed neuroblastoma cells in vitro and in vivo. oSia-MIP loaded with indocyanine green is prepared and experimentally demonstrated to be a potent targeted photothermal therapeutic for neuroblastoma. Equipping the core substrate with functional entities, the developed polySia targeting nanoplatform can be accommodated to various therapeutic modalities, holding great promise for neuroblastoma targeted therapy.

Boosting Chemodynamic Therapy by Tumor-Targeting and Cellular Redox Homeostasis-Disrupting Nanoparticles

Chemodynamic therapy (CDT) that kills tumor cells by converting low-reactivity H₂O₂ into highly toxic hydroxyl radicals (•OH) is an emerging tumor therapeutic modality, but its therapeutic efficacy is largely limited by both the lack of tumor targeting and redox homeostasis in tumor cells. Herein, we report Cu²⁺-encapsulated and GalNAc-imprinted biodegradable silica nanoparticles (nanoMIP) for boosting CDT. In this strategy, the Cu²⁺ was first encapsulated into disulfide-bridged silica nanoparticles with a high loading capacity of ∼18.3%, followed by in situ functionalization via molecular imprinting using GalNAc as a template. Such a nanovector could specifically target tumor cells overexpressing the Tn antigen to promote the cellular uptake. After internalization into tumor cells, the degradation of nanoMIP occurred in response to the tumor microenvironment, spontaneously releasing Cu²⁺/Cu⁺ via redox cycles, which in turn promoted highly potent GSH depletion and triggered •OH generation by a Fenton-like reaction. Notably, we found that the catalase activity could be effectively inhibited by the produced Cu⁺, which indirectly upregulated the endogenous H₂O₂ level. As a result, the "maladjusted" tumor cells lost the resistance against •OH damage, finally resulting in the apoptosis of tumor cells. In vitro and in vivo experiments demonstrated that our nanoMIP exhibited excellent cytotoxicity against tumor cells and high efficacy of tumor inhibition in the xenograft tumor model with negligible side effects. Taken together, our study provides not only a promising strategy for maximizing the CDT efficacy but also a new insight for developing MIP-based nanomedicine.

Molecularly imprinted materials for glycan recognition and processing

Carbohydrates are the most abundant organic molecules on Earth and glycosylation is the most common posttranslational modification of proteins. Glycans are involved in a plethora of biological processes including cell adhesion, bacterial and viral infection, inflammation, and cancer development. Coincidently, glycosides were some of the earliest molecules imprinted and have been instrumental in the development of covalent molecular imprinting technology. This perspective illustrates recently developed molecularly imprinted materials for glycan binding and processing. Novel imprinting techniques and postmodification led to development of synthetic glycan-binding materials capable of competing with natural lectins in affinity and artificial glycosidases for selective hydrolysis of complex glycans. These materials are expected to significantly advance glycochemistry, glycobiology, and related areas such as biomass conversion.

Probing Queuosine Modifications of Transfer RNA in Single Living Cells via Plasmonic Affinity Sandwich Assay

Queuosine (Q) modification on tRNA plays an essential role in protein synthesis, participating in many tRNA functions such as folding, stability, and decoding. Appropriate analytical tools for the measurement of tRNA Q modifications are essential for the exploration of new roles of Q-modified tRNAs and the rationalization of their exact mechanisms. However, conventional methods for Q modification analysis suffer from apparent disadvantages, such as destructive cells, tedious procedure, and low sensitivity, which much hamper in-depth studies of Q modification-related biological questions. In this study, we developed a new approach called plasmonic affinity sandwich assay that allows for facile and sensitive determination of Q-modified tRNAs in single living cells. This method relies on the combination of plasmon-enhanced Raman scattering detection, base-paring affinity in-cell microextraction, and a set of boronate affinity and molecularly imprinted labeling nanotags for selective recognition of individual Q modifications, including queuosine, galactosyl queuosine (Gal-Q), and mannosyl queuosine (Man-Q). The developed method exhibited high affinity extraction and high specificity recognition. It allowed for the measurement of tRNA Q modifications in not only Q-rich cultured tumor cells but also Q-deficient primary tumor cells. Usefulness of this approach for investigation of the change of the Q modification level in single cells under oxidative stress was demonstrated. Because of its significant advantages over conventional methods, this approach provides a promising analytical tool for the exploration of more roles of Q-modified tRNAs and elucidation of their mechanisms.