Anisotropic Multitentacle Janus Particles Synthesized by Selective Asymmetric Growth

Anisotropic colloidal particles with asymmetric morphology possess functionally rich heterogeneous structures, thus offering potential for intricate superstructures or nanodevices. However, it is a challenge to achieve controlled asymmetric surface partitioned growth. In this work, an innovative strategy is developed based on the selective adsorption and growth of emulsion droplets onto different regions of object which is controlled by wettability. It is found that the emulsion droplets can selectively adsorb on the hydrophilic surface but not the hydrophobic one, and further form asymmetric tentacle by the interfacial sol-gel process along its trajectory. Janus particles with an anisotropic shape and multitentacle structure are achieved via integration of emulsion droplet (soft) and seed (hard) templates. The size and number of tentacles exhibit tunability mediated by soft and hard templates, respectively. This general strategy can be expanded to a variety of planar substrates or curved particles, further confirming the correlation between tentacle growth and Brownian motion. Most interestingly, it can be employed to selectively modify one region of surface partitioned particles to achieve an ABC three-component Janus structure.

Asymmetrical ring-shaped colloidal particles for self-assembly and superhydrophobic coatings

A frame-guided wetting strategy is reported to synthesize highly uniform but asymmetrical colloidal particles from rings to oblate ellipsoids through symmetrical discs, which can self-assemble into diversified highly open 2D superstructures. In particular, ring-shaped particle monolayers have a higher contact angle of water than similar spherical ones, suggesting an attractive particle material for self-cleaning superhydrophobic coatings.

Magnetic matchstick micromotors with switchable motion modes

The ability to in situ tune various motion modes of micromotors is challenging, yet critical for any practical applications of micromotors in complex microenvironments. Here, we designed and synthesized magnetic matchstick micromotors with two motion modes, a persistent rotational motion and a straight-line motion, that can be readily and reversibly switched in situ by an external magnetic field. Such micromotors with switchable motion modes hold considerable promise for local environment sensing and probing at the microscale.

Synthesis of Methyl-Capped TiO2-SiO2 Janus Pickering Emulsifiers for Selective Photodegradation of Water-Soluble Dyes

Recently, Pickering emulsion stabilized by Janus particles has received considerable attention for interfacial reactions and droplet manipulation. However, its potential interests have been rarely explored because of the difficulties in designing and fabricating Janus particles for Pickering emulsion with suitable applications. Also, photocatalytic materials are scarcely applied as emulsifiers in Pickering emulsions because of their photogenerated hydrophilicity. This work reports the synthesis of methyl-capped Janus TiO₂-SiO₂ particles (MJTSs), which can be used as a novel emulsifier and photocatalyst simultaneously. The MJTSs, composed of an anatase TiO₂ sphere and silica rod, are prepared by inverse emulsion-based step-by-step growth. We demonstrate that the Pickering emulsion stabilized by MJTSs represents extraordinary ability of emulsification, excellent stability, and tunable emulsion type (water in oil or oil in water). In addition, the MJTSs exhibit photocatalytic activity in decomposition of pollutants in the water phase while maintaining the stability of the Pickering emulsion.

Solution-Liquid-Solid Growth and Catalytic Applications of Silica Nanorod Arrays

As an analogue to the vapor-liquid-solid process, the solution-liquid-solid (SLS) method offers a mild solution-phase route to colloidal 1D nanostructures with controlled sizes, compositions, and properties. However, direct growth of 1D nanostructure arrays through SLS processes remains in its infancy. Herein, this study shows that SLS processes are also suitable for the growth of nanorod arrays on the substrate. As a proof of concept, seedless growth of silica nanorod arrays on a variety of hydrophilic substrates such as pristine and oxide-modified glass, metal sheets, Si wafers, and biaxially oriented polypropylene film are demonstrated. Also, the silica nanorod arrays can be used as a new platform for the fabrication of catalysts for photothermal CO2 hydrogenation and the reduction of 4-nitrophenol reactions. This work offers some fundamental insight into the SLS growth process and opens a new avenue for the mild preparation of functional 1D nanostructure arrays for various applications.

Synthesis of cube–rod–tube triblock asymmetric nanostructures for enhanced heterogeneous catalysis

A triblock asymmetric nanostructure is fabricated via a sequential growth process, which can be used as an active nano stir bar with accelerated catalytic performance.

Seeded-Growth of Silica Rods from Silica-Coated Particles

Seeded growth of silica rods from colloidal particles has emerged as a facile method to develop novel complex particle structures with hybrid compositions and asymmetrical shapes. However, this seeded-growth technique has been so far limited to colloidal particles of only a few materials. Here, we first develop a general synthesis for the seeded-growth of silica rods from silica particles. We then demonstrate the growth of silica rods from silica-coated particles with three different cores which highlight the generality of this synthesis: fluorescently labeled organo-silica (fluorescein), metallic (Ag), and organic (PS latex). We also demonstrate the assembly of these particles into supraparticles. This general synthesis method can be extended to the growth of silica rods from any colloidal particle which can be coated with silica.

Precisely Endowing Colloidal Particles with Silica Branches

A method to modify colloidal particles with silica rods in a water/n-pentanol system is reported here. Because of the interfacial tension between aqueous and n-pentanol phase, water which surrounds the colloidal particles de-wets into droplets during the deposition process of silica. As a result of unidirectional deposition, silica rods grow perpendicularly on the surface of the colloidal particles at the site of the smallest curvature where the water droplet has been de-wetted. By controlling the hydrolysis conditions, particles with certain number of branches or rambutan-like particles can be obtained. This approach opens a path towards the higher levels of colloidal complexity.

Shaping Silica Rods by Tuning Hydrolysis and Condensation of Silica Precursors

We present the synthesis of colloidal silica particles with new shapes by manipulating the growth conditions of rods that are growing from polyvinylpyrrolidone-loaded water-rich droplets containing ammonia and ethanol. The silica rods grow by ammonia-catalyzed hydrolysis and condensation of tetraethoxysilane (TEOS). The lengthwise growth of these silica rods gives us the opportunity to change the conditions at any time during the reaction. In this work, we vary the availability of hydrolyzed monomers as a function of time and study how the change in balance between the hydrolysis and condensation reactions affects a typical synthesis (as described in more detail by our group earlier1). First, we show that in a "standard" synthesis, there are two silica growth processes occurring; one in the oil phase and one in the droplet. The growth process in the water droplet causes the lengthwise growth of the rods. The growth process in the oil phase produces a thin silica layer around the rods, but also causes the nucleation of 70 nm silica spheres. During a typical rod growth, silica formation mainly takes place in the droplet. The addition of partially hydrolyzed TEOS or tetramethoxysilane (TMOS) to the growth mixture results in a change in balance between the hydrolysis and condensation reaction. As a result, the growth also starts to take place on the surface of the water droplet and thus from the oil phase, not only from inside the droplet onto a silica rod sticking out of the droplet. Carefully tuning the growth from the droplet and the growth from the oil phase allowed us to create nanospheres, hollow silica rods, hollow sphere rod systems (colloidal matchsticks), and bent silica rods.

Frosted Slides Decorated with Silica Nanowires for Detecting Circulating Tumor Cells from Prostate Cancer Patients

Developing low-cost and highly efficient nanobiochips are important for liquid biopsies, real-time monitoring, and precision medicine. By in situ growth of silica nanowires on a commercial frosted slide, we develop a biochip for effective circulating tumor cells (CTCs) detection after modifying epithelial cell adhesion molecule antibody (anti-EpCAM). The biochip shows the specificity and high capture efficiency of 85.4 ± 8.3% for prostate cancer cell line (PC-3). The microsized frosted slides and silica nanowires allow enhanced efficiency in capture EpCAM positive cells by synergistic topographic interactions. And the capture efficiency of biochip increased with the increase of silica nanowires length on frosted slide. The biochip shows that micro/nanocomposite structures improve the capture efficiency of PC-3 more than 70% toward plain slide. Furthermore, the nanobiochip has been successfully applied to identify CTCs from whole blood specimens of prostate cancer patients. Thus, this frosted slide-based biochip may provide a cheap and effective way of clinical monitoring of CTCs.

Shape-Tunable Colloids from Structured Liquid Droplet Templates

Shaping colloidal building units is of paramount importance for their self-assembly into complex objects. Continuous tuning of colloidal shapes is highly desired for understanding self-assembly, but it still remains a challenge. Herein, we report a new template strategy for the shape-tunable synthesis of anisotropic colloids with shapes that can be continuously tuned from discs (oblate spheroids) to spheres to theta shapes to dumbbells. This was realized by creating structured shape-tunable droplets from patchy colloidal discs and using these droplets as templates. In particular, we found that a controlled dumbbell-to-eyeball droplet transformation can be used for the synthesis of eyeball-shaped colloids. We also demonstrated the droplet transformation pathways and applied the method to the synthesis of colloidal molecules. These colloids provide possibilities for exploring their ordered packing structures, and the method based on the use of structured droplets can be adapted for the synthesis of other functional colloidal particles.

One-pot synthesis of micron partly hollow anisotropic dumbbell shaped silica core-shell particles

A facile method is described to prepare micron partly hollow dumbbell silica particles in a single step. The obtained particles consist of a large dense part and a small hollow lobe. The spherical dense core as well as the hollow lobe are covered by mesoporous channels. In the case of the smaller lobe these channels are responsible for the permeability of the shell which was demonstrated by confocal imaging and spectroscopy.

Regiospecific Nucleation and Growth of Silane Coupling Agent Droplets onto Colloidal Particles

Nucleation-and-growth processes are used extensively in the synthesis of spherical colloids, and more recently regiospecific nucleation-and-growth processes have been exploited to prepare more complex colloids such as patchy particles. We demonstrate that surface geometry alone can be made to play the dominant role in determining the final particle geometry in such syntheses, meaning that intricate chemical surface patternings are not required. We present a synthesis method for "lollipop"-shaped colloidal heterodimers (patchy particles), combining a recently published nucleation-and-growth technique with our recent findings that particle geometry influences the locus of droplet adsorption onto anisotropic template particles. Specifically, 3-methacryloxypropyl trimethoxysilane (MPTMS) is nucleated and grown onto bullet-shaped and nail-shaped colloids. The shape of the template particle can be chosen such that the MPTMS adsorbs regiospecifically onto the flat ends. In particular, we find that particles with a wider base increase the range of droplet volumes for which the minimum in the free energy of adsorption is located at the flat end of the particle compared with bullet-shaped particles of the same aspect ratio. We put forward an extensive analysis of the synthesis mechanism and experimentally determine the physical properties of the heterodimers, supported by theoretical simulations. Here we numerically optimize, for the first time, the shape of finite-sized droplets as a function of their position on the rod-like silica particle surface. We expect that our findings will give an impulse to complex particle creation by regiospecific nucleation and growth.

Colloidal particles with complex microstructures via phase separation in swelled polymer microspheres

Incorporating –SO₃⁻ groups into PS microspheres results in the synthesis of many kinds of colloidal particles with complex microstructures via phase separation.

Synthesis of anisotropic silica colloids

Morphological evolution of tadpole-like hollow silica particles, and corresponding TEM images of typical intermediate and final products.

Unique Crystallization of Fullerenes: Fullerene Flowers

Solution-phase crystallization of fullerene molecules strongly depends on the types of solvent and their ratios because solvent molecules are easily included in the crystal lattice and distort its structure. The C₇₀ (solute)–mesitylene (solvent) system yields crystals with various morphologies and structures, such as cubes, tubes, and imperfect rods. Herein, using C₆₀ and C₇₀ dissolved in mesitylene, we present a novel way to grow unique flower-shaped crystals with six symmetric petals. The different solubility of C₆₀ and C₇₀ in mesitylene promotes nucleation of C₇₀ with sixfold symmetry in the early stage, which is followed by co-crystallization of both C₆₀ and C₇₀ molecules, leading to lateral petal growth. Based on the growth mechanism, we obtained more complex fullerene crystals, such as multi-deck flowers and tube-flower complexes, by changing the sequence and parameters of crystallization.

Thermoreversible Gels Composed of Colloidal Silica Rods with Short-Range Attractions

Dynamic arrest transitions of colloidal suspensions containing nonspherical particles are of interest for the design and processing of various particle technologies. To better understand the effects of particle shape anisotropy and attraction strength on gel and glass formation, we present a colloidal model system of octadecyl-coated silica rods, termed as adhesive hard rods (AHR), which enables control of rod aspect ratio and temperature-dependent interactions. The aspect ratios of silica rods were controlled by varying the initial TEOS concentration following the work of Kuijk et al. (J. Am. Chem. Soc., 2011, 133, 2346-2349) and temperature-dependent attractions were introduced by coating the calcined silica rods with an octadecyl-brush and suspending in tetradecane. The rod length and aspect ratio were found to increase with TEOS concentration as expected, while other properties such as the rod diameter, coating coverage, density, and surface roughness were nearly independent of the aspect ratio. Ultrasmall angle X-ray scattering measurements revealed temperature-dependent attractions between octadecyl-coated silica rods in tetradecane, as characterized by a low-q upturn in the scattered intensity upon thermal quenching. Lastly, the rheology of a concentrated AHR suspension in tetradecane demonstrated thermoreversible gelation behavior, displaying a nearly 5 orders of magnitude change in the dynamic moduli as the temperature was cycled between 15 and 40 °C. The adhesive hard rod model system serves as a tunable platform to explore the combined influence of particle shape anisotropy and attraction strength on the dynamic arrest transitions in colloidal suspensions with thermoreversible, short-range attractions.

Modification of colloidal particles by unidirectional silica deposition for urchin-like morphologies

Silica rods were grown onto the surface of various colloidal particles, resulting in urchin-like morphologies.

Fabrication and directed assembly of magnetic Janus rods

Varied morphologies and aspect ratios of magnetic Janus rods have been synthesized via a wet-chemical method.

Programmed assembly of oppositely charged homogeneously decorated and Janus particles

The exploitation of colloidal building blocks with morphological and functional anisotropy facilitates the generation of complex structures with unique properties, which are not exhibited by isotropic particle assemblies. Herein, we demonstrate an easy and scalable bottom-up approach for the programmed assembly of hairy oppositely charged homogeneously decorated and Janus particles based on electrostatic interactions mediated by polyelectrolytes grafted onto their surface. Two different assembly routes are proposed depending on the target structures: raspberry-like/half-raspberry-like or dumbbell-like micro-clusters. Ultimately, stable symmetric and asymmetric micro-structures could be obtained in a well-controlled manner for the homogeneous–homogeneous and homogeneous–Janus particle assemblies, respectively. The spatially separated functionalities of the asymmetric Janus particle-based micro-clusters allow their further assembly into complex hierarchical constructs, which may potentially lead to the design of materials with tailored plasmonics and optical properties.

Controllable Synthesis and Surface Wettability of Flower-Shaped Silver Nanocube-Organosilica Hybrid Colloidal Nanoparticles

Synthesis of hybrid colloidal particles with complex and hierarchical structures is attracting much interest theoretically and technically in recent years, but still remains a tremendous challenge. Here, we present a mild and controllable wet-chemical method for the synthesis of silver nanocube (Ag NC)-organosilica hybrid particles with finely tuned numbers (with one, two, three, four, five, or six) and sizes of organosilica petals, by simply controlling the affinity with Ag NC/nature, amount, and prehydrolysis process of alkoxysilanes. The morphologies of hybrid colloidal particles have an obvious influence on the surface wettability of the hybrid particle-based films. More and larger organosilica petals can increase the surface hydrophobicity of the hybrid particle-based films.

Mechanistic Insight into the Synthesis of Silica-Based "Matchstick" Colloids

We report an insight into the synthesis of silica-based "matchstick"-shaped colloidal particles, which are of interest in the area of self-propulsion on small length scales. The generation of aqueous emulsion droplets dispersed in an n-pentanol-rich continuous phase and their use as reaction centers allows for the fabrication of siliceous microparticles that exhibit anisotropy in both particle morphology, that is, a "matchstick" shape, and chemistry, that is, a transition-metal oxide-enriched head. We provide a series of kinetic studies to gain a mechanistic understanding and unravel the particle formation and growth processes. Additionally, we demonstrate the ability to select the aspect ratio of the "matchstick" particle in a straightforward manner.